CYB CYB. System Connection Devices. Power and VDI devices

Transcription

1 P4810 Content Outlets & switches with accessories Page 2 -PR/PC Dimmers, timers, movement detectors Page 15 -PO Kits with pole terminals and CEE outlets Page 19 -PP Kits with overvoltage protector Page 21 -PN DIN enclosures Page 23 Outlets & switches acc. to British Standard Page 26 Low voltage products Page 32 Accessories Page 43 -D240 Service gate Page 46 products dedicated for MWU health care panels Page 48 NOTE! Products marked in yellow will be withdrawn on November 30 th, (48)

2 P46890 Outlets & switches with accessories Description Service content type is a system intended for front F80 mounting in service carriers such as perimeter trunking, service poles and posts, service boxes and fl oor outlet boxes. A choice of products is also available for mounting on recessed c/c 60 mm boxes. This product document includes socket outlets and switches, as well as accessories like indicating lamps, junction boxes, terminal blocks. F80 mounting without box The master and slave socket outlets are mounted without box. This system consists of a triple master outlet, which can be extended with any number of double slave outlets. The combination is ended by an end piece, which is easily pushed in between the side of the outlet and the front cover. Marking, termination and strain relief are done on the master socket outlet. P4882 -PS master/slave system P4878 Technical data Electrical data 16 A / 250 V. Standards Connection kit, switch SS-EN Connection kit, outlet, with DIN VDE 0675 Part 6 Class C overvoltage protector Connection kit, outlet IEC 884-1, DIN 0606 Approvals Connection kit, outlet SEMKO, NEMKO, FIMKO, VDE and KEMA Connection kit, outlet without SEMKO, KEMA, VDE child protection Connection kit, outlet, with SEMKO, VDE overvoltage protector Material data Material PC/ABS Density 1.14 g/cm 3 Water absorption 0.6% Volume resistivity >10 13 Ω cm Dielectric strength 19 kv/mm UL 94 HB (halogen-free) Material PA6/ABS Density 1.12 g/cm 3 Water absorption 0.9% Volume resistivity Ω cm UL 94 HB (halogen-free) Material PA Density 1.35 g/cm 3 Water absorption 1.7% UL 94 HB (halogen-free) Material PA6, 30% glass-fi bre Density 1.35 g/cm 3 Water absorption 1.7% UL 94 HB (halogen-free) Material PA6, 15% glass-fi bre Density 1.24 g/cm 3 Water absorption 2.0% Volume resistivity >10 14 Ω cm Dielectric strength 65 kv/mm UL 94 HB Material ASA Density 1.07 g/cm 3 Water absorption 0.45% UL 94 HB (halogen-free) Material ABS DH / AS Density 1.05 g/cm3 UL 94 HB (1.7 mm) Material PMMA N8 Density 1.19 g/cm 3 Linear expansion 80x10 6 m/m C Water absorption 0.3% Volume resistivity >10 15 Ω cm Dielectric strength 30 kv/mm (DIN 53481) UL 94 HB Colour spec. = NCS 0701-G46Y RAL 9016 = NCS 0502-Y14R RAL 9010 = RAL 1013 Light grey = NCS 1902-Y24R Greyish-black = NCS 7603-R74B Black = RAL 9005 Red = NCS 3754-Y97R RAL 3003 Orange RAL 2003 Green RAL 6029 Aluminium metallic 2 (48)

3 Exploded views Outlet, single, with box 1. Box with strain relief devices 2. Label holder 3. Adaptor 4. Label 5. Label window 6. Cover 4 5 Outlets & switches with accessories Operative data Temperature range From 20 C to +40 C Suitable outdoors No Degree of protection IP20 Mounting instructions Mounting instructions are enclosed with the product. They are also available on Pl@net. Connection kit, single AD1 MI PB on TED PF PS single on TED PS master/slave overv. prot. TN, term.guide overv. prot. IT, term.guide Product Environmental Facts Product Environmental Fact fi les are available on Pl@net Master outlet without box 1. Socket outlet 2. Termination for double slave socket outlet 3. Strain relief 4. Terminal block 5. Cover over termination parts Switch 1. Box with strain relief devices 2. Label holder 3. Adaptor 4. Label 5. Label window 6. Cover with rocker 3 (48)

4 Outlets & switches with accessories connection kits, master outlet Triple master socket outlet, push-in P4881 P4881 P88856 P88856 Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices, push-in terminal block and label window with label. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. Shuttered. Hole pattern 37. Green, orange and red for priority power supply. To be combined with double slave socket outlets. -PS Black Green Orange Red -PS Big-pack (packed in a set including 45 pcs) -PS Marked DATA -PS With green LED indication 84/50/ /50/ /50/ /50/ Triple master socket outlet, screw Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices, screw terminal block and label window with label. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. Shuttered. Hole pattern 37. To be combined with double slave socket outlets. -PS 84/50/ Black RAL PS Marked DATA -PS With green LED indication 84/50/ /50/ Triple master socket outlet, push-in, without label window Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices and push-in terminal block. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. Shuttered. Hole pattern 37. To be combined with double slave socket outlets. -PS 84/50/ Triple master socket outlet, push-in, with overvoltage protection for TN mains Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices, 37 push-in terminal block and label window with label. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. With overvoltage protector TN-C and TN-S with LED indication for mains type TN. Green light indicates normal operation and red light indicates overload. Shuttered. Hole pattern 37. To be combined with double slave socket outlets. -PS 84/50/ Triple master socket outlet, screw, with overvoltage protection for TN mains Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices, 37 screw terminal block and label window with label. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. With overvoltage protector TN-C and TN-S with LED indication for mains type TN. Green light indicates normal operation and red light indicates overload. Shuttered. Hole pattern 37. To be combined with double slave socket outlets. -PS 84/50/ (48)

5 Outlets & switches with accessories connection kits, master outlet Triple master socket outlet, push-in, with overvoltage protection for IT mains P88856 P88856 Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices, 37 push-in terminal block and label window with label. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. With overvoltage protector IT-C with LED indication for mains type IT. Green light indicates normal operation and red light indicates overload. Shuttered. Hole pattern 37. To be combined with double slave socket outlets. -PS 84/50/ For IT mains Triple master socket outlet, screw, with overvoltage protection for IT mains Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices, 37 screw terminal block and label window with label. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. With overvoltage protector IT-C with LED indication for mains type IT. Green light indicates normal operation and red light indicates overload. Shuttered. Hole pattern 37. To be combined with double slave socket outlets. -PS 84/50/ P61976 Triple master socket outlet, push-in, with installation couplers Triple connection kit including socket/cover plate (in one piece) with earthing system, two strain relief devices, push-in terminal block and label window with label. Also including cover to be fi tted over the termination, and end piece that snap-fi ts on either side of the outlet. With two halogen-free cables (30 cm free length), and 3x2.5 mm 2 wire and male and female installation couplers. Child protection. Hole pattern 37. To be combined with double slave socket outlets. -PS With Wieland cables 84/50/ P PS With Wago cables 84/50/ P PS With Ensto cables 84/50/ (48)

6 Outlets & switches with accessories connection kits, slave outlet Double slave socket outlet Double slave socket outlet to be plugged into the master or another slave socket outlet. Including end piece that snap-fi ts on either side of the outlet. Shuttered. Hole pattern P89550 P88857 P P P P4880 -PS Black -PS Big-pack (packed in a set including 45 pcs) -PS Marked DATA 84/39/ /39/ /39/ Double slave socket outlet, kit with push-in adaptor Double slave socket outlet including an end piece with label window that snap-fi ts on one side of the outlet and a -AC adaptor with push-in termination on the other side. The adaptor includes a protective cover that is fi tted under the front cover of trunking, poles, etc., and two snap-in function strain relief devices. Allows one incoming and one outgoing cable, max 3x2.5 mm 2. To be plugged into another slave socket outlet. Shuttered. Hole pattern 37. -PS 84/39/ PS 84/39/ Marked DATA Double slave socket outlet, kit with screw adaptor Double slave socket outlet including an end piece with label window that snap-fi ts on one side of the outlet and a -AC adaptor with screw termination on the other side. The adaptor includes a protective cover that is fi tted under the front cover of trunking, poles, etc., and two snap-in function strain relief devices. Allows one incoming and one outgoing cable, max 3x2.5 mm 2. To be plugged into another slave socket outlet. Shuttered. Hole pattern 37. -PS 84/39/ PS 84/39/ Marked DATA Double slave socket outlet, kit with push-in adaptor Double slave socket outlet including two end pieces that snap-fi t on either side of the outlet and a -AC adaptor with push-in termination on one side. The adaptor includes a protective cover that is fi tted under the front cover of trunking, poles, etc., and two snap-in function strain relief devices. Allows one incoming and one outgoing cable, max 3x2.5 mm 2. To be plugged into another slave socket outlet. Shuttered. Hole pattern 37. -PS 84/39/ Double slave socket outlet, kit with Wieland adaptor Double slave socket outlet including end piece that snap-fi ts on one side of the outlet, and -AD adaptor for Wieland 3-pole male interface GST-18 on the other side. The adaptor includes protective cover with label window. To be plugged into another slave socket outlet. Shuttered. Hole pattern 37. Material: PC/ABS, PA6. -PS 84/39/ Double slave socket outlet, pre-wired kit with Wieland installation couplers Double slave socket outlet including -ET earth terminal, -AD adaptor with push-in terminal block and protective cover with label window, and end piece that snap-fi ts on one side of the outlet. Pre-wired with connection cable type H05VV-F3G including male and female Wieland installation couplers. Cable length 2x1.4 m. To be plugged into another slave socket outlet. Shuttered. Hole pattern 37. -PS 1.5 mm 2 cable -PS 2.5 mm 2 cable 84/39/ /39/ (48)

7 Outlets & switches with accessories connection kits, slave outlet 2 x double slave socket outlet, kit with push-in adaptor P89549 P89549 A combination of two double slave socket outlets with an end piece with label window that snap-fi ts on one side of the combination and a -AC adaptor with push-in termination on the other side. The adaptor includes a protective cover that is fi tted under the front cover of trunking, poles, etc., and two snap-in function strain relief devices. Allows one incoming and one outgoing cable, max. 3x2.5 mm 2. To be plugged into another slave socket outlet. Shuttered. Hole pattern 37. -PS 84/39/ x double slave socket outlet, kit with screw adaptor A combination of two double slave socket outlets with an end piece with label window that snap-fi ts on one side of the combination and a -AC adaptor with screw termination on the other side. The adaptor includes a protective cover that is fi tted under the front cover of trunking, poles, etc., and two snap-in function strain relief devices. Allows one incoming and one outgoing cable, max. 3x2.5 mm 2. To be plugged into another slave socket outlet. Shuttered. Hole pattern 37. -PS 84/39/ accessories, master & slave outlet Adaptors Adaptor including terminal block and protective cover with label window. With two snap-in function strain relief devices. Allows one incoming and one outgoing cable, max. 3x2.5 mm 2. To be used in combination with -PS double slave socket outlet. P85701 P P85702 P AD Push-in terminal block -AD Screw type terminal block 84/41/ /41/ Adaptors to be fitted under the front cover Adaptor including terminal block and protective cover to be fi tted under the front cover of trunking, poles, etc. With two snap-in function strain relief devices. Allows one incoming and one outgoing cable, max. 3x2.5 mm 2. Suitable for -PS double slave socket outlet Material: PC/ABS, PP. -AC White 71/35/ Push-in terminal block -AC White 71/35/ Screw type terminal block Adaptors Wieland Adaptor for Wieland 3-pole male interface GST-18, with protective cover with label window. To be used in combination with - PS double slave socket outlet. -AD 84/59/ Adaptor for Wieland 3-pole male interface GST-18 without cover. To be used in combination with -PS double slave socket outlet. Material: PA6. -AD 55/59/ P83356 P88854 Earth terminal Earth terminal including a 25 cm cable with fl at pin connector for earth connection of trunking base or cover. Suitable for triple master and double slave outlet -PS. Material: PA6. -ET 41/ Blank cover Blank cover to be used in combination with master socket outlet -PS. To be exchanged for double slave socket outlet when required. -PL 84/28/ (48)

8 Outlets & switches with accessories accessories, master & slave outlet End piece P88855 P End piece intended for -PS master and slave socket outlets. Snap-fi ts on either side of the outlet and locks the outlet in the trunking. -ES End piece with label window 84/20.1/ End piece with label window intended for -PS slave socket outlets. Snap-fi ts on either side of the outlet. -ESW 84/20/ (48)

9 Outlets & switches with accessories connection kits, outlet Double connection kit, outlet P3805 L57820 Double connection kit, French standard. Intended for Poland and France. Including socket with earthing system, box, adaptor, two strain relief devices and cover. Shuttered, push-in termination. With loop terminal. Hole pattern 0/180. Material: Box, cover in all colours except white NCS: PC/ABS. Cover in white NCS: PA6/ABS. -PF 84/45/ Double connection kit, French standard. Intended for Belgium, Poland and France. Including socket with earthing system, box, adaptor, two strain relief devices and cover. Shuttered, screw termination. With loop terminal. Hole pattern 0/180. -PF Red Double connection kit, outlet 84/45/ Double connection kit, French standard. Intended for the Czech Republic. Including socket with earthing system, box, adaptor, two strain relief devices and cover. With push-in termination. Material: Box, cover in all colours except white NCS: PC/ABS. Cover in white NCS: PA6/ABS. -PF Red 84/45/ Double connection kit, French standard. Intended for the Czech Republic. Including socket with earthing system, box, adaptor, two strain relief devices and cover. With screw termination. -PF Single connection kit, outlet 84/45/ Single connection kit including socket with earthing system, box, adaptor, two strain relief devices, cover and label with label window. Shuttered, push-in termination. Hole pattern 90. Material: PC/ABS, PA. French French 90 P3797 L PS -PS Without shutters Single connection kit, outlet 84/52/ /52/ Single connection kit, including socket with earthing system, mounting frame, adaptor, cover and label with label window. Shuttered, push-in termination. Hole pattern 90. Intended for mounting on boxes with c/c 60 mm. Material: PC/ABS, PA. 90 -PS 90/40/ L61030 P63537 Single connection kit, outlet, French standard Single connection kit, French standard, including socket with earthing system, box, adaptor, two strain relief French devices, cover and label with label window. Shuttered. Connectable to fi ve-wire system with secondary conductor. Hole pattern 90. -PF 84/47/ With screw termination -PF 84/47/ With push-in termination Triple connection kit, outlet, European standard Triple connection kit acc. to European standard, Class II, including socket, box, adaptor, two strain relief devices, cover and label with label window. Shuttered, with screw termination -PE 84/46/ (48)

10 Outlets & switches with accessories connection & device kits, front cover kits, outlet Connection kit, CEE outlet P62432 Connection kit including single phase CEE outlet (Bals), installation box with strain relief devices, frame with label window and four screws. Material: PC. -PC White/red 82/110/ Device kit, outlet Single device kit including socket with earthing system, box, adaptor and two strain relief devices. With push-in termination. Hole pattern 90. To be combined with front cover kit. Material: PC/ABS, PA. 90 L PS 80/50/ P68904 L67310 L67230 Device kit, CEE outlet Device kit including single phase CEE outlet (Bals) and frame with label window. To be screw-fastened on box MIB- A1 by four included screws. To be combined with front cover kit. Material: PC. -C220 Grey/blue 82/70/ CEE V/16A -C380 Grey/red 82/70/ CEE V/16A Device unit, outlet Single device unit including socket with earthing system mounted on adaptor. With push-in termination. Hole pattern 90. To be combined with front cover kit and mounting box or frame. Material: PA. -PS 80/50/ PS With LED indication and overvoltage protector 80/50/ Single device unit, French standard, including socket with earthing system mounted on adaptor. To be combined with front cover kit and mounting box or frame. Material: PA. -PF 80/50/ With screw termination Front cover kit, outlet Front cover kit, single, including shuttered cover plate and label with label window. To be mounted together with 90 device kit or device unit. P64411 L CE For device kit or device unit CE Like the above but without shutters 84/27/ /25/ CE With LED, for device kit or device unit /27/ CE With overvoltage prot., for device kit or device unit /27/ Front cover kit, single, including shuttered cover plate and label with label window. French standard. To be mounted together with device unit and CE 84/27/ French (48)

11 Outlets & switches with accessories device kits/units, switch Device kit, switch P3798 L57390 L57420 L67050 L67110 Switch device kit including box, switch insert, adaptor and two strain relief devices. Switch-on position upwards. 250V 16A. To be combined with front cover kit. Material: PC/ABS, PA. -PB White 80/50/ pole with indicating lamp 0.9 ma -PB White 80/50/ pole -PB White 80/50/ pole -PB White 80/50/ way -PB White 80/50/ pole springreturn -PB White 80/50/ pole 2-way -PB White 80/50/ gang -PB White 80/50/ Venetian blind/ 1-pole switch -PB White 80/50/ Venetian blind Device unit, switch Switch device unit including switch insert mounted on adaptor. Switch-on position upwards. To be combined with front cover kit with rocker and mounting box or frame. Material: PA6. -PB 68/38/ pole springreturn -PB 68/38/ pole -PB 68/38/ Venetian blind 11 (48)

12 Outlets & switches with accessories front cover kits/connection kits, switch Front cover kit, switch L57270 L57780 L57290 Front cover kit including single or double rocker, label and label window. Switch-on position upwards or downwards, see below. To be mounted together with various device kits and units, see below. Material: PC/ABS -RC Single rocker, for 1- pole, 1-pole springreturn, 2-way or intermediate switch 84/27/ RC Single rocker, marked 1-0, for 2-pole switch down up 84/27/ /27/ P2193 P2193 L57310 L57800 L57790 L57300 L57260 L57770 L57280 L57770 L RC Single rocker with red indication window, for 1-pole switch with ind. lamp -RC Single rocker with green indication window, for 1-pole switch with ind. lamp -RC Double rocker, for 2- gang or 2- pole/ 2-way switch -RC Double rocker with arrow symbols, for venetian blind switch -RC Double rocker with arrow symbols, marked 1-0, for venetian blind/1-pole switch down 84/27/ up 84/27/ down 84/27/ up 84/27/ /27/ down 84/27/ up 84/27/ down 84/27/ up 84/27/ Connection kit, switch, one rocker Switch connection kit including box, switch insert, adaptor, two strain relief devices, cover with one rocker and label with label window. Switch-on position downwards or upwards. 250V 16A. -PB up 84/52/ pole PB up 84/52/ pole springreturn -PB down 84/52/ pole, red indicating lamp up White NC 84/52/ (48)

13 Outlets & switches with accessories connection kits, switch Connection kit, switch, one rocker -PB down 84/52/ pole up 84/52/ PB down 84/52/ pole 2-way P2193 L57360 L57360 up 84/52/ PB Intermediate up 84/52/ Connection kit, switch, two rockers Switch connection kit including box, switch insert, adaptor, two strain relief devices, cover with two rockers and label with label window. Switch-on position downwards or upwards. 250V 16A. -PB 2-pole 2-way -PB 2-gang down 84/52/ up 84/52/ up 84/52/ PB down 84/52/ Venetian blind up 84/52/ Connection kit, switch, two rockers -PB Venetian blind/ down 1-pole switch up 84/52/ /52/ L62700 L62680 Connection kit, switch, for wall mounting Switch connection kit including mounting frame, switch insert, adaptor, cover with rocker and label with label window. Switch-on position downwards or upwards. 250V 16A. Intended for mounting on boxes with c/c 60 mm. Material: PC/ABS, PA. -PB down 90/45/ pole, red indicating lamp up 90/45/ Connection kit, switch, for wall mounting Switch connection kit including mounting frame, switch insert, adaptor, cover with rocker and label with label window. Switch-on position downwards or upwards. 250V 16A. Intended for mounting on boxes with c/c 60 mm. Material: PC/ABS, PA. -PB down 90/45/ gang up 90/45/ L PB Venetian blind down 90/45/ up 90/45/ PB Venetian blind/ down 90/45/ pole switch up 90/45/ (48)

14 Outlets & switches with accessories Wiring diagrams of switches 1-pole Spring-return 1-pole with indication 2-pole 2-way D13970 D13940 D13980 D13960 D13990 D13930 D13920 D13900 D13950 D13910 Intermediate Double Venetian blind 2-pole 2-way Venetian blind/1-pole switch 14 (48)

15 Dimmers, timers, movement detectors P4174 P3799 P4175 Description The -PR range of products is made up by products with electronic functions. It includes various types of dimmer, a speed controller and timers. The electronics range also includes -PC, a PIR movement detector. Dimmers and speed controller For incandescent lamps there are dimmers for 300, 550 and 900 W. The 300 and 550 W versions can also control electronic transformers. For halogen lamps there are dimmers for both conventional and electronic transformers. For conventional transformers up to 400 VA or 900 VA there is a thyristor dimmer, and for electronic transformer 550 VA there is a transistor dimmer. For fl uorescent tubes the range includes dimmers to control HF units ranging from one to ten volt input, and dimmers 400 VA, 900 VA for controlling Ø26 mm fl uorescent tubes with dimmable electronic ballast and Ø38mm fl uorescent tubes with preheat transformer. The speed controllers for single-phase induction motors VA control ducting fans, fl ue fans, ventilation fans, etc. Movement detector -PC is a movement detector with relay output. It has three adjustment switches, Mode selector, Delay adjustment and Ambient light, which can only be operated when the cover has been removed, i.e. only by facility manager or installer. Standards & certificates Standards Dimmers: EN 55014, EN Certifi cates Timer: CE Other products: CE, SEMKO, NEMKO, FIMKO Operative data Temperature range Suitable outdoors Degree of protection +5 C +35 C No IP20 Material data Box, Cover, Adaptor, Material PC/ABS Mounting frame, Mounting Density 1.14 g/cm 3 plates Water absorption 0.6% Volume resistivity >10 13 Ω cm Electrical strength 19 kv/mm UL 94 HB (halogen-free) Colour spec G46Y Grey NCS S 5502-B Aluminium metallic Device unit Material PA6 Density 1.19 g/cm 3 Linear expansion 100x10 6 / C Water absorption 2.8% Colour spec. White Window holder Material PC/ABS Density 1.20 g/cm 3 Water absorption 0.6% Volume resistivity >10 15 Ω cm Electrical strength 19 kv/mm Label window Material PMMA Density 1.19 g/cm 3 Linear expansion 80x10 6 / C Water absorption 0.3% Volume resistivity >10 15 Ω cm Electrical strength 30 kv/mm (DIN 53481) UL 94 HB 15 (48)

16 Dimmers, timers, movement detectors Exploded views Dimmer, speed controller Box 2. Strain relief 3. Electronic dimmer with adaptor 4. Label holder 5. Cover 6. Label window 7. Dimmer knob 6 7 Performance Electrical and technical data Dimmer ATD300R, Rated current: 10 A ATD600R Rated voltage: 250 V 10%+6% 50 Hz Rated power: Filament lamps W and W. Electronic transformers W and W. The transformer must have been approved for control purposes. NOTE! Conventional transformers or other inductive loads must not be connected to the dimmer. Protection: The dimmer has built-in protection against shortcircuits and overloads. The protection is reset automatically. Switch: Single-pole/two-way push-button switch. Terminals: Screw terminal, approved for bridging. One neutral marked X. Dimmer APE10T Rated voltage: 250 V 10%+6% 50 Hz Rated power: For 1 50 HF units 1 10 V, like Philips, Osram, Siemens, Helvar. To be connected to the plus and minus terminals of the controllers. NOTE! It is very important to maintain the correct polarity (+, ) throughout the installation. Protection: Precision 6.3 A fuse marked F (fast). A spare fuse is supplied in the fuse-holder. Switch: Single-pole push-button switch, max. 6 A. NOTE! A fl uorescent tube load of max. 10x36 W or equivalent can be connected across the 6 A push-button switch of the HF controller. If several fi ttings are to be controlled by the dimmer, the recommended method is to switch them on and off via a separate switch or an intermediate relay. Terminals: Screw terminals, approved for bridging. Can control the following HF units: Philips ETC-R, e.g. ETC236R Philips BPL-D13, e.g. BPL 155 D13 Helvar controllable HF units EL-AC, EL-BC and EL-HFC Siemens EVD dynamics for 36 W and 58 W fluorescent tubes Osram QT-DIM 1x18 2x56 W, QT-DIM 1x36-2x55 W and QT- D/E-DIM 1x16 W, 1x26 W for Delux D/F etc. and others conforming to the standard for 1 10 V control. Movement det. APR10A Rated voltage: 230 VAC 10%+6% 50 Hz Rated power: Maximum 2300 VA (cos ϕ >0.4) Switch function: Relay with triac 0-point control Area of perception: 10 m long x 180 wide horizontal plane 6 10 m x 50 wide vertical plane Light level: lux (adjustable) Delay time: 2 sec. 21 min. (adjustable) Features: Mode selector for: 0 Output always off A Output controlled by detectors 1 Output always on Speed controller Rated current: 10 A AD400VH Rated voltage: 250 V 10%+6% 50 Hz Rated power: Single-phase induction motors VA. Starting current 4 A, normal operation 2 A. NOTE! The power factor of the motor must be taken into account. Protection: Precision 4 A fuse marked F (fast). Spare fuse is supplied in the fuse-holder. Switch: Single-pole rotary switch. Terminals: Screw terminals. Mounting instructions Mounting instructions are enclosed with each product respectively. They are also available on Pl@net. Product Art. ATD300R ATD600R APE10T AD400VH APR10A Dimmer wall Product Environmental Facts Product Environmental Fact fi les are available on Pl@net. 16 (48)

17 Dimmers, timers, movement detectors -PR Dimmers, Speed controllers, Power supply kit Connection kit, dimmer, 550 W and 300 W P3799 Dimmer 550 W (ATD600R) for incandescent lamps W and low-voltage halogen lamps with electronic transformer W (which must be approved and suitable for use with a dimmer). The dimmer must not be used together with conventional transformers or any other inductive load. In a traditional staircase (two-way) circuit, only one of the two-way switches can be replaced by a dimmer. The dimmer has built-in protection against short-circuits and overloading. Resets automatically. Material: PC/ABS, PMMA. -PR For front 80 mounting 84/60/ L PR For wall mounting on boxes with c/c 60 mm 90/45/ L67030 P3799 P3799 P3799 Dimmer 300 W (ATD300R) for incandescent lamps W and low-voltage halogen lamps with electronic transformer W (which must be approved and suitable for use with a dimmer). The dimmer must not be used together with conventional transformers or any other inductive load. In a traditional staircase (two-way) circuit, only one of the two-way switches can be replaced by a dimmer. The dimmer has built-in protection against short-circuits and overloading. Resets automatically. Material: PC/ABS, PMMA. -PR For front 80 mounting 84/60/ Connection kit, dimmer, APE10T Dimmer 1-10 V (APE10T) for fluorescent light fi ttings with controllable HF units, rating 1 10 V HF units can be controlled. The positive and negative poles of the dimmer must be connected to the positive and negative poles of the HF unit. Poles 1 and 2 of the switches are wired to switch the fi ttings on and off. The break function is rated at max. 6 A (max. 360 W fluorescent tube rating). If the load is higher, the break function can control a relay coil instead. Note that the fl uorescent tubes must not go out at the minimum setting of the dimmer. Material: PC/ABS, PMMA. -PR For front 80 mounting 84/60/ Connection kit, speed controller Speed controller 400 VA (AD400VH) for the control of induction motors. The motor speed is controlled via the regulated phase, marked with a sine wave and an arrow. For single-phase induction motors VA. Material: PC/ABS, PMMA. -PR 84/60/ For front 80 mounting Device unit, dimmer 1-10 V Device unit 1-10 V (APE10T) including electronic dimmer with adaptor, to be combined with front cover kit -FR1. Dimmer for fl uorescent light fi ttings with controllable HF units, rating 1 10 V HF units can be controlled. The positive and negative poles of the dimmer must be connected to the positive and negative poles of the HF unit. Poles 1 and 2 of the switches are wired to switch the fittings on and off. The break function is rated at max. 6 A (max. 360 W fluorescent tube rating). If the load is higher, the break function can control a relay coil instead. Note that the fl uorescent tubes must not go out at the minimum setting of the dimmer. Material: PA6. -PR White 68/38/ L67040 P72822 Front cover kit, dimmer/speed controller Front cover kit including cover, label window with label and dimmer knob. To be combined with dimmer or speed controller device units. -FR1 84/15/ Power supply kit Power supply kit for 4xLexCom home switch. Input 230 VAC and output 12 VDC, 0.5A. Including box with strain relief, terminal block, power supply device and cover. -PR 84/41.2/ (48)

18 Dimmers, timers, movement detectors PIR P4175 Connection kit, PIR Movement detector (APR10A), with relay output W, for all types of load, like incandescent lamps, low-voltage halogen lamps, fl uorescent tubes. For rooms that require automatic light control, e.g. toilets, corridors, public meeting rooms. With three adjustment switches: mode selector, delay adjustment and ambient light. Mode selector Automatic. Light is switched on and off according to movement detection. OFF. All lights (load) are switched off independent of movement detection. ON. All lights (load) are switched on independent of movement detection. Delay adjustment (Time) For setting of the time that the lights will stay on after the last detection of movement, adjustable 2 21 min. Ambient light (Lux) For setting of the ambient light level at which the lights are to be switched on, adjustable lux. Material: PC/ABS, PMMA. -PC 84/57/ (48)

19 Pole terminals and CEE outlets Basic kits, pole terminal P1938 Connection kit, equipotential P67392 Basic kit, cable glands P62636 Connection kit, CEE outlet P67392 Description Basic kit, pole terminal The product consists of a mounting plate to be mounted in -BK fl at or angled cover. The mounting plate includes four pole terminals which are connected to one another by an earth rail. Connection to the pole terminals can be made according to the following: 1 Pole terminal with 4 mm terminal tags. 2 Cable clip with a minimum opening of 5 mm. 3 Connection cable with a maximum core diameter of 2 mm. Basic kit, cable glands The product consists of a mounting plate and two screw mounted cable glands TCG-M20, suitable for Ø mm cables. Connection kit, equipotential The product consists of cover, mounting frame and a steel insert including two pole terminals. Connection to the pole terminals can be made with the Thorsman plug CTA-PO. Maximum earth cable size 4x16 mm 2. Exploded views Basic kit, pole terminal Pole terminal with insulated PVC-bush 2. Steering washer 3. Mounting plate 4. Spacer 5. Earth rail 6. Nut M4 7. Cable clip for 2,5 mm 2 connection cable 8. Washer Connection kit, equipotential Cover 2. Label window 3. Label 4. Mounting frame 5. Screw 6. Insert Material data Basic kits Mounting plate Material PC/ABS Density 1.14 g/cm 3 Linear expansion 70x10 6 / C Water absorption 0.6% Volume resistivity >10 13 Ω cm Dielectric strength 19 kv/mm UL 94 HB halogen-free Colour spec. Greyish-black NCS 7603-R74B Earth rail (in pole terminal kit) Material Copper ISO Cu-OF, SS , DIN OF-Cu, BS C103 Density 8.9 g/cm 3 Cable glands (in cable gland kit) Material PA Density 1.35 g/cm 3 Colour Grey Connection kit, equipotential Cover, mounting frame Material PC/ABS Density 1.14 g/cm 3 Linear expansion 70x10 6 / C Water absorption 0.6% Volume resistivity >10 13 Ω cm Dielectric strength 19 kv/mm UL 94 HB halogen-free Colour spec. cover white NCS 0701-G46Y white RAL 9010 white RAL 1013 grey NCS S 5502-B Insert Material Steel Operative data Temperature range Suitable outdoors From 40 C to +70 C No Product Environmental Facts Product Environmental Fact fi les are available on Pl@net. 19 (48)

20 Pole terminals and CEE outlets -PO Basic and connection kits P1938 Internal ID- Basic kit, pole terminal Basic kit including mounting plate with pole terminals, for equipotential function. Intended for fl at or angled covers -BK. Material: PC/ABS, copper. -PO Greyish-black 44/32/ P62636 P67392 P75380 Basic kit, cable glands Basic kit including mounting plate and two screw mounted cable glands TCG-M20 for Ø mm cables. Degree of protection IP20. Intended for service gate -D240. Material: PC/ABS (plate), PA (cable glands). -PO Greyish-black, 32/44/ grey Connection kit, equipotential Connection kit including cover with label window and label, mounting frame and insert with two pole terminals. Termination with earth cable H05V-K, maximum 4x16 mm 2. According to standard DIN Intended for products with front opening F80. Material: PC/ABS, steel. -PO 84/28/ Connection kit, CEE outlet Connection kit for CEE standard devices including MIB box, F80 mounting frame, CEE outlet, label, label window and screws. Degree of protection: IP44. Material: PC/ABS, PMMA. -PO Grey 82/115/ Single 250V type CEE 216-6, double pole and PE 20 (48)

21 Grun = Betrieb Rot = Defekt Normalbetrieb Aus Test System Connection Overvoltage protectors A12780 Uberspannungsschutz 230 V AC Description -PP connection kit with overvoltage protector is adjusted to 230 VAC and mains type TN or IT, and is integrated in the -S40 box. The protector is intended for individual workplaces, not for entire house properties or plants. The protector has a built-in acoustic alarm and external indication of power and overloading. The acoustic alarm is controlled by a switch mounted in the front. The protector can also be supervised in quiescent current e.g. for connection to surveillance centres. Exploded view L Box -S40 2. Adaptor with overvoltage protector 3. Front plate 2 Standards EMC EN (Generic standard, Imm unity Industrial environment) EMC EN (Generic standard, Emission Residential/Commercial environment) EN (Safety standard) Approvals Approved acc. to Proposal DIN VDE 0675 Teil 6/11.89 for Class C. Fulfi ls requirements acc. to the EMC and LV directives (CE-marked). Electrical data Mains type TN Supply voltage/current 230 VAC 50/60 Hz, 16 A Max. surge current at pulse 5 ka shape 8/20μs Max. connection cable area 2.5 mm 2 FK, 4.0 mm 2 EK Cut-off voltage L N 1100 V L PE 800 V N PE 800 V Quiescent current supervision 20 ma Material data Box -S40 Material PC (polycarbonate) Density 1.17 g/cm 3 Linear expansion 70x10 6 / C Water absorption 0.6 % UL 94 V-0 (1.6 mm halogen-free) Colour spec Y Front plate Material ASA Density 1.07 g/cm 3 Linear expansion 95x10 6 / C Water absorption 0.45 % UL 94 HB (halogen-free) Colour spec G46Y Aluminium metallic Adaptor for overvoltage protector Material PA (polyamide) Density 1.35 g/cm 3 Linear expansion 40x10 6 / C Water absorption 1.7 % UL 94 HB (halogen-free) Colour spec. Black NCS 9500 Operative data Temperature range From 0 C to +50 C Suitable outdoors No Degree of protection IP 20 Estimated min. length of service At least 10 years Mounting instruction Mounting instructions are enclosed with the product. They are also available on Pl@net , Termination guide SE, GB, DE, FI , Termination guide NO Product Environmental Facts Product Environmental Fact fi les are available on Pl@net. 21 (48)

22 Overvoltage protectors -PP Connection & basic kits, overvoltage protector Connection kit, mains type TN P4081 P4081 Connection kit including box, overvoltage protector and front plate with text in various languages. For mains type TN. To be used for protection of connected electric equipment against overvoltage. Material: PC, PA, ASA. -PP Swedish text -PP English text 84/53/ /53/ Connection kit, mains type IT Connection kit including box, overvoltage protector and front plate with Norwegian text. For mains type IT. To be used for protection of connected electric equipment against overvoltage. Material: PC, PA, ASA. -PP 84/53/ (48)

23 DIN enclosures P4123 P module with hinged lid For 9 18 DIN modules Description -PN product range includes two types of DIN enclosures for mounting in service carriers with front F80. For 9 18 DIN modules Enclosure made up by a base part with an integrated DIN profi le, covers and stop ends, available in sizes for 9, 12, 15 and 18 DIN modules for horizontal mounting. 4-module enclosure with hinged lid 4-module enclosure that can handle between one and four DIN modules, provided with a hinged lid for protection of the DIN devices and available with or without locking function of the lid. For both horizontal and vertical mounting. Standards DIN VDE. Approvals Both -PN types are approved by VDE and SEMKO. P4181 Material data -PN for 9 18 DIN modules Material: Aluminium, sheet Aluminium (stop end pieces) steel and acrylic plastic. Density 2.7 g/cm 3 Linear expansion 24x10 6 / C Colour Black textured paint (horizontal) Sheet steel (cover) Density 7.8 g/cm 3 Linear expansion 12x10 6 / C Colour spec G46Y Acrylic plastic PMMA (protective cover) Density 1.18 g/cm 3 Linear expansion 70x10 6 / C Colour Transparent smoke-grey -PN 4-module with Material PC/ABS hinged lid Density 1.14 g/cm 3 Linear expansion 70x10 6 / C Water absorption 0.6% Colour spec G46Y Grey NCS S 5502-B Electrical data -PN for 9 18 DIN modules -PN 4-module with lid 16 A, 400 V Maximum cable size = 5x6 mm 2 16 A, 400 V Maximum cable size = 5x2.5 mm 2 Operative data Temperature range: Suitable outdoors: Degree of protection: From 25 to +40 C No IP20 Mounting instructions Mounting instructions are enclosed with the products. They are also available on Pl@net. Encl. for 9 18 DIN modules Art module encl. with hinged lid Art Product Environmental Facts Product Environmental Fact fi les are available on Pl@net. 23 (48)

24 DIN enclosures Exploded views S Encl. for 9 18 DIN modules 1. Base part with integrated DIN profi le 2. Stop end 3. Strain relief clamp 4. Locking device for Front F80 5. Cover 6. Covering plate 7. Hinge 8. Magnetic latch 9. Protective cover 10. Screw (M3) to secure the cover Configuration of -PN for 9 18 DIN modules According to the DIN standard, one DIN module should measure 17.5 mm, but in reality there are module measures up to 18 mm. The following measures have been established for 4-module earth leakage switches: Merlin Gerin Siemens ABB Legrand Hager AEG ABB variant 2 F&G 72 mm 72 mm 72 mm 71.5 mm 71 mm 71 mm 70 mm 70 mm We therefore recommend only 8 modules in the 9-module size, etc. In the approval from VDE the number of devices to be mounted in -PN 18 is also limited, in this case to maximum 13 DIN devices, see picture below. Please note, however, that this limitation is only applicable to power current installations, not for low current installations like IHC and EIB. S module enclosure Mounting box Strain relief 3. Bridge connector plate 4. Terminal block, push-in 5. DIN rail 6. Lid 7. Cover 8. Label window 9. Label 10. Screw RXS-H ST 2.9x Hinged lid 12. Key lock modules 24 (48)

25 DIN enclosures DIN enclosures L64395 L46540 P module DIN enclosure with hinged lid 4-module DIN enclosure intended for snap-in mounting in service carriers with front F80. The enclosure is suitable for 1 4 DIN modules and has a hinged lid to protect the devices. -PN Same as the above but with keylock and keys to lock the lid. -PN Grey 84/86/ /86/ DIN enclosure for 9 18 DIN modules, horizontal DIN enclosure for 9, 12, 15 or 18 DIN modules, for snap-in, screw-secured mounting in horizontal service carriers with front F80. Made up by a base part with an integrated DIN profi le, covers and stop ends. Including transparent protective cover. Strain relief device and earth terminal on the DIN-rail. Please note that the number of power DIN devices, such as MCBs and RCDs, is limited to 13 for the 18 module size. Material: Aluminium, sheet steel, acrylic plastic. -PN 120/107/ For 9 modules -PN 120/107/ For 12 modules -PN 120/107/ For 15 modules -PN 120/1207/ For 18 modules Covering plate Covering plate for DIN enclosure for 9 18 DIN modules, to be mounted in service carriers with 80 mm front. Material: ABS. -PN White 52/6.4/ (48)

26 P25370 Outline L S30/D30 1. Knock-out Ø16, six in S30 and ten in D30 2. Four snap-fi xing devices 3. Adjustable fi xing for front plate, four in D30 and eight in S30 4. Screw pillar, four in S30 and two in D30 5. Fixing for adaptor L44540 L L45370 L S40/D knock-outs Ø16 or Ø knock-outs Ø16 3. Snap-fi xing device for front F80, two in S40 and four in D40 4. Adjustable fi xing for front plate, four in D40 and eight in S40 5. Fixing for screw pillar, four in S40 and two in D40 6. Fixing for adaptor 7. Stop lug for adaptor British Standard outlets and accessories Description Mounting boxes -S30 and D30 are provided with screw pillars M3.5 and meet British standard for the mounting of screw-fastened standard outlets. They are available in two sizes, single box S30 and double box D30, with a box depth of 30 mm. Mounting boxes -S40 and D40 have no screw pillars for standard devices. However, in combination with screw pillar -P40, available as an accessory, the boxes will fulfi l British standard. Thorsman frameless outlets for the UK market, as well as standard outlets can be installed in the boxes. In the single box outlets can be mounted either vertically or horizontally. Standards Mounting boxes: BS 4662:1970 Standard power outlets: BS 1363:1984 Approvals Dual master telephone outlet has been approved by British Telecom. Material data Mounting box Material PC (polycarbonate) Density 1.17 g/cm 3 Linear expansion 70x10 6 m/m C Water absorption 0.6% Volume resistivity >10 13 Ω cm Dielectric strength 18 kv/mm UL 94 V-0 (1,6 mm halogen-free) Colour spec Y Screw pillar Material PA.6 (polyamide), 15% glass-fi bre Density 1.25 g/cm 3 Linear expansion 70x10 6 m/m C Water absorption 2.3% Volume resistivity >10 13 Ω cm Dielectric strength 65 kv/mm UL 94 HB Colour White Adaptor Material PA (polyamide) Density 1.35 g/cm 3 Linear expansion 40x10 6 m/m C Water absorption 1.7% Volume resistivity >10 12 Ω cm UL 94 HB (halogen-free) Colour spec. Black NCS 9500 Front plate Material ASA Density 1.07 g/cm 3 Linear expansion 95x10 6 m/m C Water absorption 0.45% Volume resistivity >10 14 Ω cm Dielectric strength 90 kv/mm UL 94 HB (halogen-free) Colour spec G46Y Grey NCS S 5502-B Outlet for master telephone Material ABS Density 1.04 g/cm 3 Linear expansion 90x10 6 m/m C Water absorption 0.5% Volume resistivity >10 12 Ω cm UL 94 Colour spec G Operative data Temperature range Suitable outdoors Degree of protection Restrictions Environmental sensitivity From +80 C to 40 C No IP20 Only for use in products with front F80 Direct contact with solvents 1. Mounting box 2. Adaptor with outlet 3. Front plate 26 (48)

27 British Standard outlets and accessories Design and dimensions -S40/D40 Compatibility Suitable for Front opening F80. Frameless products. Strain relief CAN-FDS, CAN-FDS1, CAN-FF Conduit bush -CT Pipe adaptor CAN-D20, CAN-D25, TED-SL16, TED-SL20* Earth terminal -ET Not suitable for Products with other front opening than F80 or with a depth below 52 mm (S40/D40) and 42 mm (S30/ D30). * Not for S30/D30 -S30/D30 Mounting instruction Mounting instruction is enclosed with the product and is also available on Pl@net PU Product Environmental Facts Product Environmental Fact fi les are available on Pl@net. 27 (48)

28 British Standard outlets and accessories Mounting boxes with accessories, blank cover Mounting box, double L44350 Front-mounted and snap-fastened mounting box with 14 entries Ø 16 mm, adapted to snap-fastened strain relief devices and conduit bush. The entries are two on each short side, four on each long side and two at the bottom. Ten of the entries can be increased to Ø 19,5 mm for pipe connection. At the bottom of the box there is room for earth terminal -ET. To be used in conjunction with -PU and -PL. Material: PC. -D40 79/44/ L44390 P64410 L45370 L44360 Mounting box, single Front-mounted and snap-fastened mounting box with ten entries Ø 16 mm, adapted to snap-fastened strain relief devices and conduit bush. The entries are two per short side, two per long side and two at the bottom. They can be increased to Ø 19,5 mm for pipe connection. At the bottom of the box there is room for earth terminal -ET. To be used in conjunction with -PU, - PL and. Material: PC. -S40 79/44/ Mounting box with screw pillars, double Front-mounted and snap-fastened mounting box with ten entries Ø 16 mm, adapted to snap-fastened strain relief devices and conduit bush. The entries are two on each short side, two on each long side and two at the bottom. Two screw pillars M 3.5 for screw-fastened standard devices with a centre distance of mm. At the bottom of the box there is room for earth terminal -ET. To be used in conjunction with -PU, -PL and outlets according to British Standard. Material: PC. -D30 79/32/ Mounting box with screw pillars, single Front-mounted and snap-fastened mounting box with six entries Ø 16 mm, adapted to snap-fastened strain relief devices and conduit bush. The entries are two on each short side and two at the bottom. Four screw pillars M 3.5 for screwfastened standard devices with a centre distance of 60,3 mm. At the bottom of the box there is room for earth terminal CY-BET. To be used in conjunction with -PU, -PL, and outlets according to British Standard. Material: PC. -S30 79/32/ Accessories for mounting box Screw pillar with thread bush M 3.5, to be snap-fastened in mounting box -S40 and -D40. For the mounting of screwfastened standard outlets. Material: PA6, 15% glass-fi bre. -P40 White 14/12/ L44910 Conduit bush to be used between boxes mounted directly beside one another, as a protection for the cables. Suitable for mounting box type -S30/D30 and S40/D40. -CT Grey Ø16/ L44370 Blank cover Snap-fastened blank cover, including adaptor and front plate. To be used a s a blank cover for future expansion or own holemaking. To be mounted in double box -D40/-D30 or single box -S40/-S30. Material: PA, ASA. -PL For double box - D40/D30 White RAL /12/ P PL For single box - S40/S30 84/12/ (48)

29 British Standard outlets and accessories Outlets L44100 Single outlet kit, standard, 13 A Single basic outlet kit standard 13 A, including adaptor with outlet and front plate. The outlet can be mounted either horizontally or vertically in single box -S40 or -S30. Material: PA, ASA. -PU 84/25/ Without switch L PU With switch 84/30/ L PU With switch and indication lamp 84/30/ L44430 L44480 Twin outlet kit, standard, 13 A Twin basic outlet kit standard 13 A, including adaptor with outlet and front plate. To be mounted in double box -D40 or - D30. Material: PA, ASA. -PU 84/25/ Without switch -PU 84/30/ With switch Outlet kit, telephone/data Krone Basic outlet kit with shutter, including adaptor with connector and front plate. The outlet can be mounted either horizontally or vertically. To be mounted in single box -S40 or -S30. Material: PA, ASA. 84/23/ RJ11, single L44490 RJ11, dual 84/23/ L45450 Outlet kit, telephone/data Basic outlet kit with shutter, including adaptor and front plate, for snap-fastened LJU6C and RJ45. The outlet can be mounted either horizontally or vertically. Suitable for -S40 and -S30. Material: PA, ASA. 84/12/ LJU6C/RJ45, single L45460 LJU6C/RJ45, dual 84/12/ L44500 Connection kit, single outlet, standard, 13 A Single outlet connection kit standard 13 A, including box, adaptor with outlet and front plate. The outlet can be mounted either horizontally or vertically. Intended for products with F80 opening. Material: PC, PA, ASA. -PU Grey 84/47/ Without switch P PU With switch Grey 84/50/ P3801 -PU With switch and indication lamp Grey 84/50/ (48)

30 British Standard outlets and accessories Outlets L44500 Connection kit, single outlet, non-standard A Single outlet connection kit non-standard A, including box, adaptor with outlet and front plate. The outlet can be mounted either horizontally or vertically. Intended for products with F80 opening. Material: PC, PA, ASA. -PU Grey 84/47/ Without switch P PU With switch Grey 84/50/ L44530 Connection kit, twin outlet, standard, 13 A Twin outlet connection kit standard 13A, including box, adaptor with outlet and front plate. Intended for products with F80 opening. Material: PC, PA, ASA. -PU Without switch Grey 84/47/ P3809 -PU With switch Grey 84/50/ L44550 Connection kit, twin outlet, standard, 13 A -PU Grey 84/50/ With switch and indication lamp P68909 L PU With 2-way 2-pole switch and indication lamp White 84/50/ Connection kit, twin outlet, non-standard A Twin outlet connection kit non-standard 1A, including box, adaptor with outlet and front plate. Intended for products with F80 opening. Material: PC, PA, ASA. -PU Grey 84/47/ Without switch P PU With switch Grey 84/50/ L44580 L44590 L44570 Connection kit, telephone/data Krone Connection kit with shutter, including box, adaptor with connector and front plate. The outlet can be mounted either horizontally or vertically. Material: PC, PA, ASA, PC/ABS. RJ11, single RJ45, single RJ11, dual RJ45, dual Dual master Grey 84/47/ Grey 84/47/ Grey 84/47/ Grey 84/50/ Grey 84/47/ (48)

31 British Standard outlets and accessories Outlets L45430 Connection kit, telephone/data LJU6C Connection kit with shutter, including box, adaptor and front plate. Hole pattern 25x38.5, adjusted for snap-fi tted connectors. The outlet can be mounted either horizontally or vertically. Material: PC, PA, PC/ABS. Grey 84/47/ LJU6C/RJ45, single L45440 LJU6C/RJ45, dual Grey 84/47/ L47280 Connection kit with blank cover Connection kit including box, adaptor and cover. Material: PC, PA, PC/ABS. -PL Grey 84/47/ Single -PL Double Grey 84/47/ (48)

32 P2114 P2117 Low voltage devices Description low voltage service content system is designed to fi t service carriers with F80 front opening. In addition, it can be mounted on the wall or installed in an apparatus box. The system is frameless and boxless and is made up by snap-fi tted covers with mounting plates and connectors. The covers are available in angled or fl at design. The mounting kits -BK include mounting frame, cover, label and label window. Put together with various mounting plates and connectors the mounting kits make complete connection kits. Material data Cover in RAL-specifi ed colour Material PC/ABS Density 1.14 g/cm 3 Linear expansion 70x10 6 m/m C Water absorption 0.6% Volume resistivity >10 13 Ω cm Dielectric strength 19 kv/mm UL 94 HB (halogen-free) Colour NCS 0502-Y14R Other covers, wall mounting Material ASA frame Density 1.07 g/cm 3 Linear expansion 95x10 6 m/m C Water absorption 0.45% Volume resistivity >10 14 Ω cm Dielectric strength 90 kv/mm UL 94 HB (halogen-free) Colours White = NCS 0701-G46Y Light grey = NCS 1902-Y24R Greyish-black = NCS 7603-R74B Aluminium metallic Box -S40 Material PC (polycarbonate) Density 1.17 g/cm 3 Linear expansion 70x10 6 m/m C Water absorption 0.6% UL 94 V-0 (1.6 mm halogen-free) Colour spec Y Mounting frame for F80 products, Material PC/ABS mounting frame for installation Density 1.14 g/cm 3 boxes Linear expansion 70x10 6 m/m C Water absorption 0.6% Volume resistivity >10 13 Ω cm Dielectric strength 19 kv/mm UL 94 HB (halogen-free) Colour 0701-G46Y (only frame for installation boxes) Mounting plates, front plates Material PC/ABS Density 1.14 g/cm 3 Linear expansion 70x10 6 m/m C Water absorption 0.6% Volume resistivity >10 13 Ω cm Dielectric strength 19 kv/mm UL 94 HB (halogen-free) Colour mounting plates White = NCS 0701-G46Y NCS 0502-Y14R Greyish-black = NCS 7603-R74B Colour front plates White = NCS 0701-G46Y NCS 0502-Y14R Adaptor for overvoltage protector Material PA (polyamide) (-DS) Density 1.35 g/cm 3 Linear expansion 40x10 6 m/m C Water absorption 1.7% UL 94 HB (halogen-free) 32 (48)

33 Exploded views F80 mounting S Wall mounting S Cover, angled 6. Mounting frame F80 2. Cover, flat 7. Mounting frame wall 3. Mounting plate 8. Protective casing, high 4. Label window or low design 5. Label 9. Surface mounting frame Low voltage devices Material data, cont. Surface mounting frame Material ASA Density 1.07 g/cm 3 Linear expansion 95x10 6 m/m C Water absorption 0.45% Volume resistivity >10 14 Ω cm Dielectric strength 90 kv/mm UL 94 HB (halogen-free) Colour White = NCS 0701-G46Y Light grey = NCS 1902-Y24R Greyish-black = NCS 7603-R74B Label window Material PMMA N8 Density 1.19 g/cm 3 Linear expansion 80x10 6 m/m C Water absorption 0.3% Volume resistivity >10 15 Ω cm Dielectric strength 30 kv/mm (DIN 53481) UL 94 HB Colour Clear Fibre spool Material PE-HD Density 0.95 g/cm 3 Linear expansion 150x10 6 m/m C Water absorption 0.07% Colour Natural Protective casings -RK, Material PP (polypropylene) -DF Density g/cm 3 Linear expansion 100x10 6 m/m C Water absorption <0.1% Volume resistivity 10 2 Ω cm Dielectric strength >30 kv/mm UL 94 HB (halogen-free), withstands glow-wire test 750 Colour Red = NCS 2080-Y80R White = NCS 0500 (fibre) Operative data Temperature range: Suitable outdoors: From 40 C to +80 C (except -DS, connection kit with overvoltage protector, which is suited for a temperatur range between 0 C and +50 C) Not suitable Mounting instructions Mounting instructions are enclosed with the products. They are also available on Pl@net. -BK7/BK11 Art printed on the plastic bag -BK12 Art printed on the plastic bag -BK13 Art printed on the plastic bag Product Environmental Facts Product Environmental Fact fi les are available on Pl@net. 33 (48)

34 Low voltage devices Mounting kits L28330 P3713 P3712 For F80 mounting Mounting kit including F80 mounting frame, snap-fi tted cover in angled or fl at design, label window and label. For mounting in service carriers with 80 mm front. Material: See Material data on previous pages. -BK1 -BK2 -BK5 With hole pattern adapted to AMP-CO Greyish-black 84/50/ /25/ /29/ P64409 P64415 P64416 P66835 P64419 P4640 P1930 -BK6 With hole pattern adapted to AMP 110 Grey Connect, Lucent, Krone. Integrated shutters -BK7 With mounting frame adapted to c/c 60 mm devices and SE national telephone socket with screw terminals -BK8 With mounting frame adapted to c/c 60 mm devices and cover with hole pattern suitable for aerial socket outlets type R+TV -BK9 With mounting frame adapted to c/c 60 mm devices and cover with hole pattern suitable for aerial socket outlets type R+TV+Sat -BK10 With mounting frame adapted to c/c 60 mm devices and cover with square hole pattern acc. to DIN Without label window. -BK11 With mounting frame adapted to c/c 60 mm devices and cover with hole pattern for low voltage outlet of Mosaic type -BK12 With hole pattern adapted to four LexCom outlets 84/25/ /30/ /25/ /25/ /25/ /25/ /22/ P BK12NL With hole pattern adapted to four LexCom outlets, and with four mounting adaptors and one blanking plug. For the Dutch market. 84/22/ (48)

35 Low voltage devices Mounting kits P64400 P3714 For F80 mounting Mounting kit including holder, snap-fi tted fl at cover, two label windows and two labels. Intended for LexCom Home switch 4+1 port, 10/100 Mbps. Requires 12V DC external power supply. For snap-fi tting in service carriers with 80 mm front opening. NOTE! Not compatible with TAS+. Material: Holder = Steel, Cover = PC/ABS. -BK13 84/35/ For wall mounting Mounting kit including wall mounting frame, snap-fi tted cover in angled or fl at design, label window and label. For mounting directly on the wall or by means of a surface mounting frame, or on a recessed box (c/c 60 mm). Material: See Material data on previous pages. -BK3 84/40/ P3715 -BK4 84/13.5/ (48)

36 Low voltage devices Mounting plates L66180 L21220 L21210 L21200 L21190 L21180 L21150 L21130 L21120 L21110 L21100 Mounting plates with various hole patterns, intended for use with mounting kits -BK and with OptiLine 50 angled basic kit for plates. The plates are available in three versions; with label holder, without label holder and with built-in shutter. Plates with shutter only fi t -BK6. All plates except those with built-in shutter for -BK6 can be mounted angled or fl at, and they can all be fi tted without tools. Blank plates -MP1 Blank plate without label holder, for future expansion or for hole cutting by client -MP2 Blank plate with label holder, for future expansion or for hole cutting by client BNC, TNC, EAE Greyish-black Greyish-black -DC Greyish-black Keyed hole for 1 x BNC, White TNC, EAE, with label holder -DC Keyed double holes for 2 x BNC, TNC or EAE- 2, with label holder F, ST for cable TV or fibre -DC Keyed double holes for 2 x F or ST, with label holder, for cable TV nets or fi bre Thomas & Betts Thomas&Betts for 2 x 8-position modular jack STP, UTP and blind plug, with label holder Lucent Greyish-black Lucent for 2 x 8-position modular jack UTP and blind plug, with label holder AMP NetConnect AMP NetConnect for 2 x 8-position modular jack UTP Category 3 and blind plug, with label holder AMP NetConnect AMP NetConnect for 2 x 8-position modular jack STP, UTP, Krone Keystone UTP/STP and blind plug, with label holder IBM 1 x IBM cable system connector type 1, with label holder 2 x IBM GFP (Global Foot Print), with label holder P2044 Without label holder 12/32/ /32/ /32/ P1937 With label holder P2040 With dust shutter White 12/32/ /32/ /32/ /32/ /32/ Greyish-black 12/32/ /32/ /32/ (48)

37 Low voltage devices Mounting plates L x D-sub 1 x D-sub 9 pole, with label holder Greyish-black 12/32/ L x D-sub 15 pole, with label holder Greyish-black 12/32/ L63660 L55150 L54670 L54660 L21330 L21330 L21320 L21290 L x D-sub 25 pole, without label holder XLR, universal type 1 x XLR, universal type (male and female fi t in the same hole pattern), with label holder 12/32/ Greyish-black 12/32/ Modular Jack UTP & STP, Reichle & De-Massari 18/32/ x 8-position modular jack UTP & STP, Reichle & De-Massari, without label holder 2 x 8-position modular jack UTP & STP, Reichle & De-Massari, without label holder. Greyish-black 1 port module, Reichle & De-Massari, FreeNet 2 x 1 port module from Reichle & De-Massari, FreeNet, without label holder Greyish-black 18/32/ /32/ SC Duplex from AMP, Molex, Lucent Tech (Lucent), Dätwyler, Siecor -DF 12/32/ x SC Duplex from AMP, Molex, Lucent Tech (Lucent), Dätwyler, Siecor, with label holder -DF 12/32/ x SC Duplex from AMP, Molex, Lucent Tech (Lucent), Dätwyler, Siecor, with label holder 2 x 8-position modular jack, only for mounting in -BK6 AMP NetConnect, Krone KM8 and others, 2 x 8-position modular jack STP, UTP, with integrated shutters. NOTE! Only for mounting in -BK6. Grey Like the above but for Grey Lucent tech. Systimax, M-series, 2 x 8-position modular jack UTP Like the above but for Krone K8, PremisNet, Keystone 2 x 8-position modular jack STP, UTP Alcatel 8-pole modular jack type LAN Alcatel 8-pole modular jack type LAN mark-6, with label holder Greyish-black 11/43/ /43/ /43/ /32/ (48)

38 Low voltage devices Mounting plates L55120 L63670 L57190 L66190 L57180 L55120 Panduit MINI-COM, Mini-Jack or Opto-Jack 2 x Panduit MINI- COM, Mini-Jack or Opto-Jack, with label holder Siemon MX Siemon MX modular outlet, also suitable for Siemon SC/SC duplex fi bre outlet, with label holder Greyish-black Greyish-black Greyish-black 3 x Siemon MX UTP modular outlet. Also suitable for Siemon SC/ SC duplex fi bre outlet and 2 x Siemon MX STP modular outlet mounted with a blank cover. Without label holder. LexCom modular 125/250 Greyish-black 2 x LexCom modular outlet 125/250 with mounting adaptors, with label holder ITT-Cannon modular jack 21/32/ /32/ /32/ /32/ /32/ ITT-Cannon 8-pole modular jack type ISCS 808, with label holder Infra+ 18.5/32/ Infra+, with label holder P81709 P VGA and telephone 1 x VGA and 1 x telephone socket Ø3.5, 3- pole, without label holder Anixter 2 x Anixter (corning) modular outlet Greyish-black 12/32/ /32/ (48)

39 Low voltage devices Connection kits for F80 mounting, including connectors L20920 L20930 Internal ID- Connection kit including F80 mounting frame, label window with label, fl at or angled cover, mounting plate and connector(s). Depending on the connector(s), the kits can be used for structured cabling networks for pair cables, general low voltage, coaxial or fi bre connection. L14720 L14720 L44740 L44320 L50360 L15100 L21190 L21190 L21210 L21210 L21260 L position modular jack 84/26/ Flat cover, 1 x 6- position modular jack + blind plug 84/26/ Flat cover, 2 x 6- position modular jack 84/50/ Angled cover, 1 x 6- position modular jack + blind plug 84/50/ Angled cover, 2 x 6- position modular jack 9-pole D-sub 84/50/ Angled cover, 9-pole D- sub male AMP 110 Connect Cat. 5 UTP 568A/568B 84/33/ Flat cover, 1 x AMP 110 Connect Cat. 5 UTP 568A/568B NCS + blind plug Flat cover, 2 x AMP 110 Connect Cat. 5 UTP 568A/568B 84/33/ /50/ Angled cover, 1 x AMP 110 Connect Cat. 5 UTP 568A/568B + blind plug Angled cover, 2 x AMP 110 Connect Cat. 5 UTP 568A/568B 84/50/ AMP 110 Connect Cat. 5 STP 568A/568B 84/33/ Flat cover, 2 x AMP 110 Connect Cat. 5 STP 568A/568B 84/50/ Angled cover, 1 x AMP 110 Connect Cat. 5 STP 568A/568B + blind plug 84/50/ Angled cover, 2 x AMP 110 Connect Cat. 5 STP 568A/568B Lucent MPS100 Cat. 5 UTP 568A/568B Flat cover, 2 x Lucent MPS100 Cat. 5 UTP 568A/568B 84/30/ Angled cover, 2 x Lucent MPS100 Cat. 5 UTP 568A/568B 84/50/ Lucent Cat. 6 UTP 568A/568B 84/33/ Flat cover, 2 x Lucent Cat. 6 UTP 568A/568B 84/50/ Angled cover, 2 x Lucent Cat. 6 UTP 568A/568B 39 (48)

40 Low voltage devices Connection kits for F80 mounting, including connectors Reichle & De-Massari Cat. 5 FTP 84/50/ Angled cover, 2 x Reichle & De-Massari Cat. 5 FTP ST Multimode -DF 84/50/ x 2 Angled cover, 2 x ST Multimode. Termination guide not included. Duplex SC/SC Multimode -DF 84/50/ Angled cover, Duplex SC/SC Multimode with two screws L23560 L21330 L15480 L21150 L52150 L54660 L52150 L54670 L55390 L55230 x 2 -DF Angled cover, 2 x duplex SC/SC Multimode with four screws 84/50/ AMP-CO, with dust cap 84/47/ Flat cover -BK5, AMP-CO, including dust cap L62560 L62560 L62570 L62570 L58890 L57190 L58890 L57190 L58890 L57190 L58890 L57190 LexCom 125 Cat 5e STP 84/50/ Angled cover, 1 x LexCom 125 Cat 5e STP, blind plug and black mounting adaptor 84/50/ Angled cover, 2 x LexCom 125 Cat 5e STP, black mounting adaptors LexCom 125 Cat 5e STP 84/25/ Flat cover, 1 x LexCom 125 Cat 5e STP, blind plug and black mounting adaptor Flat cover, 2 x LexCom 125 Cat 5e STP, black mounting adaptors 84/25/ LexCom 125 Cat 5e UTP 84/50/ Angled cover, 1 x LexCom 125 Cat 5e UTP, blind plug and black mounting adaptor Angled cover, 2 x LexCom 125 Cat 5e UTP, black mounting adaptors 84/50/ LexCom 125 Cat 5e UTP 84/25/ Flat cover, 1 x LexCom 125 Cat 5e UTP, blind plug and black mounting adaptor Flat cover, 2 x LexCom 125 Cat 5e UTP, black mounting adaptors 84/25/ (48)

41 Low voltage devices Connection kits for F80 mounting, including connectors L62570 L58890 L57190 L62560 L58890 L57190 P81284 L55350 LexCom 250 Cat 6 STP 84/50/ Angled cover, 1 x LexCom 250 Cat 6 STP, blind plug and black mounting adaptor Angled cover, 2 x LexCom 250 Cat 6 STP, black mounting adaptors 84/50/ Flat cover, 2 x LexCom 250 Cat 6 STP, black mounting adaptors 84/34/ LexCom 250 Cat 6 UTP Angled cover, 1 x LexCom 250 Cat 6 UTP, blind plug and black mounting adaptor Angled cover, 2 x LexCom 250 Cat 6 UTP, black mounting adaptors Flat cover, 2 x LexCom 250 Cat 6 UTP, black mounting adaptors 84/50/ /50/ /27/ Connection kit including -BK13 Connection kit including mounting kit -BK13 (holder, snap-fi tted fl at cover, label windows and labels) with 4xLexCom Home switch and power supply kit -PR (box with strain relief, terminal block, power supply device and cover). Material: Steel, PC/ABS. 45/84/ Connection kits including connectors and shuttered mounting plate Kit including F80 mounting frame, label window with label, cover, shuttered mounting plate, connector(s) and termination guide. Packed by the piece in a plastic bag. To be used in structured cabling networks for pair cables. L53420 L14720 L44320 L55150 L55150 L /35/ x AMP110 Cat. 5 UTP 568A/568B + blind plug 2 x AMP110 Cat. 5 UTP 568A/568B 84/35/ /34/ x Lucent MPS100 Cat. 5 UTP 568A/568B 84/32/ x Krone Keystone Cat. 5 UTP 568B 41 (48)

42 Low voltage devices Connection kits for wall mounting, including connectors L20980 L20990 Kit including wall mounting frame, label with label window, angled or fl at cover, mounting plate, connector(s) and termination guide. Depending on the connector(s), the kits can be used for structured cabling networks for pair cables, general low voltage, coaxial or fi bre connection. L62570 L58890 L62560 L58890 L52150 L15480 L44740 L44320 L50360 L57190 L57190 L54660 L21150 L21210 L21210 L21260 x2 9-pole D-sub male 84/40/ Angled cover, 9-pole D- sub male AMP 110 Connect Cat. 5 UTP 84/40/ Angled cover, 1 x AMP 110 Connect Cat. 5 UTP 568A/568B + blind plug 84/40/ Angled cover, 2 x AMP 110 Connect Cat. 5 UTP 568A/568B AMP 110 Connect Cat. 5 STP 84/40/ Angled cover, 1 x AMP 110 Connect Cat. 5 STP 568A/568B + blind plug 84/40/ Angled cover, 2 x AMP 110 Connect Cat. 5 STP 568A/568B ST Multimode -DF 84/40/ Angled cover, 2 x ST Multimode. Termination guide not included. Duplex SC Multimode -DF 84/40/ Angled cover, Duplex SC Multimode with two screws LexCom 125 Cat. 5e UTP 84/40/ Angled cover, 1 x LexCom 125 Cat. 5e UTP, blind plug and black mounting adaptor 84/40/ Angled cover, 2 x LexCom 125 Cat. 5e UTP, 2 x black mounting adaptors LexCom 125 Cat. 5e STP 84/40/ Angled cover, 2 x LexCom 125 Cat 5e STP, black mounting adaptors 42 (48)

43 Accessories Accessories for P64418 L66960 L62670 Mounting frames, power current Mounting frame with 80 mm front opening. To be screw-mounted on installation boxes with c/c 60 mm. Intended for singlemodule power-current devices. -FM1 90/18/ Mounting frame to be snap-fi tted in service carriers with F80 front opening. Intended for single-module power-current devices. -AD1 White 80/18/ Mounting frames, low voltage Mounting frame, low, with 80 mm front opening. To be screw-mounted on installation boxes c/c 60 mm. The mounting frame is also prepared for installation together with mini trunking type TMK Intended for low voltage mounting kits -BK. -MF1L 90/23/ P64408 Mounting frame, low, with 80 mm front opening. To be screw-mounted on installation boxes c/c 71 or 84 mm. The mounting frame is also prepared for installation together with mini trunking type TMK Intended for low voltage mounting kits -BK and power-current mounting frame -AD1. -MF2L 90/23/ P64407 Mounting frame, high, with 80 mm front opening. To be screw-mounted on walls without installation boxes. Intended for low voltage mounting kits -BK and power-current mounting frame -AD1. -MF1H 90/42/ P MF2H 90/42/ L67020 L63180 P3716 P1920 Protective casing Protective casing to be mounted on the back of the mounting frame, for protection of data connectors and cable connections. Intended for low voltage mounting kits -BK1 and -BK2. See also Compatibility on page 65. Material: PP. -RK Red 63/38/ high -RK Red 63/26/ low Surface mounting frame Surface mounting frame, to be mounted on the wall together with low voltage mounting kits -BK3 and -BK4 to provide an extra height of 25 mm. Material: ASA. -RF 84/26.5/ Junction box Junction box including cover and strain relief devices. To be used as a traditional junction box for distribution of terminal groups, etc. -BJ Mounting box and blank cover 84/84/ Mounting box to be snap-fi tted in service carriers with F80 front opening. Provided with eight knockouts; two with a pre-mounted strain relief for cables up to Ø14 mm, two for accessories like CAN-FDS, CAN-FF, -D20, -D25 and -CT and four at the bottom for cables up to Ø12 mm. Intended for single-module power-current devices. -TB White 79/40/ L67250 Blank cover to be used in combination with mounting box -TB. -FC1 84/9/ (48)

44 Accessories Accessories for P67391 P64403 P64412 P67390 Indicating lamp Indicating lamp 0.9 ma intended for power-current switches. Material: PA (casing). -GL2 16/25/ Terminal block Terminal block for push-in connection, 16A/250V, 3x2.5 mm 2. Intended for -PB, -PR and 4-module -PN. Material: Casing = PPO, connector part = brass, tin coated. -PT White 10/10/ Screw pillar Screw pillar for Phillips cross-slotted screw 1. Used to mount screw-fi xed standard outlets c/c 60 mm. Intended for boxes -S40 and -D40. Material: PA6, 30% glass-fi bre. -P3 Natural 11/43/ Marking kit Marking kit including window holder, label window and label. Intended for -PS double and triple power current devices with a marking option. Material: PC/ABS, PMMA. -LW 15/44/ L66950 Marking kit including label window and label. Intended for low voltage and single power current devices with a marking option. Material: PMMA. -LW2 12/67/ P64397 Label sheets, Fleximark Label sheet including perforated labels without backing, to be used in laser printers. For marking of wiring devices for power and communication or of mounting plates. Material: Polyester. -LL1 White 210/297/0.2 (A4) labels, size 66x10 mm for wiring devices P64397 Label sheets, Partex Label sheet including stamped labels with self-adhesive backing, to be used in laser printers. For marking of wiring devices for power and communication or of mounting plates. Material: Polyester. -LL2 White 210/297/0.2 (A4) labels, size 66x10 mm for wiring devices P64405 P1919 Fibre spool Fibre spool intended to handle remaining fi bre cable when terminating. Provided with velcro-fastening for mounting on wall or in installation boxes. Capacity: 4 m, 900 mm fi bre cable. Material: PEHD. -FS Natural Ø50/ Protective casing for fibre optics Protective casing to be mounted in service carriers with front F80, together with two low-voltage connection or mounting kits. Also compatible with protective casing -RK, low design. Including removable partition wall, which can be used to separate fi bre and copper cables. Provided with eight cable exits on the long sides. There are also two cable exits on the short sides; one that is angled at 45, to allow mounting of several casings next to each other, and one adapted to the BICC Brand-Rex Blolite system, including nipple. Bending radius >30 mm. A bending radius of 10 times the cable diameter is normally recommended, i.e. in this case a cable diameter of 3 mm at the most. -DF allows installation to satisfy the preliminary standard EN Material: PP. -DF White 79/39/ D13790 Fibre capacity max. 4 m cable, diameter 0.9 mm, when using the entire coiling space. D13800 Fibre capacity max. 2 m cable, diameter 0.9 mm, when using half the coiling space. 44 (48)

45 Accessories -RK Compatibility -RK protective casing cannot be mounted together with connectors marked no in the table below. -RK high with mounting kit -RK low with mounting kit Connector type BK1 angled BK2 fl at BK1 angled BK2 fl at Alcatel yes yes yes no AMP 2x8-position modular jack UTP yes yes yes no AMP 110 Con 2x8-position modular yes yes yes no jack STP AMP 110 Con 2x8-position modular yes yes yes no jack UTP AMP 1xSC duplex yes no yes no 1xBNC TNC yes yes yes no 2xBNC TNC yes yes yes no 1xDIN 3/8 yes yes yes yes 2xDIN 3/8 yes yes yes yes 1xD-sub 9 yes yes yes yes 1xD-sub 15 yes yes yes yes 1xD-sub 25 yes yes yes no 1xEAE-1R, -1ER yes no yes no 2xEAE-2R, -2ER yes no yes no 1xF yes yes yes yes 2xF yes yes yes yes IBM type 2 1xIBM yes yes yes no IBM type 1 1xIBM + 1x8-position yes yes yes no modular jack AMP ITT-Cannon yes yes yes yes LexCom 125 UTP/STP yes yes yes no LexCom 250 UTP/STP yes yes yes no LexCom100 duplex SC/SC yes no yes no Lucent 2x8-position modular jack STP yes yes yes no Lucent 2x8-position modular jack UTP yes yes yes no R&M 1x8-position modular jack UTP yes yes yes no R&M 2x8-position modular jack UTP yes yes yes no R&M 1x8-position modular jack STP yes yes yes no R&M 2x8-position modular jack STP yes yes yes no R&M FreeNet 8-p modular yes yes yes no Siemon Mx yes yes yes no Siemon Mx duplex SC/SC yes no yes no 1xST yes no yes no 2xST yes no yes no T&B 2x8-position modular jack STP yes yes yes no T&B 2x8-position modular jack UTP yes yes yes no Thinnet Tap AMP* yes no 2xTwinax yes yes yes yes 1xXLR yes yes yes yes * Only fl at mounting. 45 (48)

46 P62098 P62443 Exploded view S Junction box 2. Main cover 3. Data cover 4. Label window and label 5. Terminal block 6. Two earthing cables Design and dimensions R Cable for series connection 8. Mounting plate TCG (with cable glands and locking nut) 9. Mounting plate, cable entrance 10. Mounting plate, blind Service gate Description Service gate -D240 is a low-profi le steel junction box, intended for use as a universal connection point between the fi xed installation and mobile prewired units such as poles and posts. To support easy plug-in/plug-out of power, installation couplers have been integrated in mounting plates. The use of mounting plates secures compatibility with installation couplers to come. The service gate has two compartments, for power and communication respectively. The communication compartment has one cable entry position and four positions for confi guration, i.e. in total eight modular connectors at the most. The power compartment has six positions for confi guration with Wieland or Ensto 3 5 pole connectors or cable entry type TCG-M20 supporting two cables for further connection to terminal blocks. The service gate is intended for supply of power and communication to two work-places. By installing two boxes on top of one another, four workplaces can be supported. All outlet positions have labels for individual marking, and there is also a separate label for marking of the service gate itself. The service gate is available in our pre-wired offer, ordered by means of PSA-PC. However, there is also a pre-defi ned service gate with Wieland confi guration, to be ordered by a ref. number. Technical data Electrical data Degree of protection 250/400 V, 16 A IP20 Standards & certificates Standards SS Certifi cates SEMKO CE-marking acc. to LVD (Low Voltage Directive) Material data Material Steel Density 7.8 g/cm 3 Surface treatment Electroplating Product Environmental Facts Product Environmental Fact fi les are available on Pl@net. 245 P (48)

47 Service gate Service gate -D240 with accessories Service gate, pre-wired P62606 Service gate made up by a steel junction box, with two compartments, for power and communication respectively. Communication compartment with one cable entry and four outlet positions and power compartment with six outlet positions, all positions with labels for individual marking. Intended for use as a universal connection point between the fi xed installation and mobile pre-wired units such as poles and posts. Material: Steel, electroplated. -D240 44/245/ xxx Service gate, pre-defined Service gate like the above but pre-defi ned, confi gurated with the following: Power In/out 5-pole Wieland GST 18 (2 types, black and white) Drop Power 3-pole Wieland GST 18 (2 types, black and white) L1, L2 or L3 4 x LexCom Cat. 6 UTP Material: Steel, electroplated. -D240 44/245/ Drop 3-pole L1 Compatible products: Connection kits, -PO, -IC. 47 (48)