PXC Compact Series Configuration and Sizing Guidelines

Transcription

1 PXC Compact Series Configuration and Sizing Guidelines Building Technologies Restricted

2 Copyright Notice Copyright Notice Notice Document information is subject to change without notice by Siemens Industry, Inc. Companies, names, and various data used in examples are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Siemens Industry, Inc. Warning This equipment generates, uses, and can radiate radio frequency energy. If equipment is not installed and used in accordance with the instructions manual, it may cause interference to radio communications. Equipment has been tested and found to comply within the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference. Residential area equipment users are required to take whatever measures necessary to correct the interference at their own expense. Service Statement devices are combined to make a system. Each control device is mechanical in nature and all mechanical components must be regularly serviced to optimize their operation. Siemens Industry, Inc. branch offices and authorized distributors offer Technical Support Programs that will ensure continuous, trouble-free system performance. For further information, contact your nearest Siemens Industry, Inc. representative. Copyright 2017 Siemens Industry, Inc. FCC Regulations The manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible could void the user s authority to operate the equipment. For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. 2

3 Copyright Notice To the Reader Your feedback is important to us. If you have comments about this manual, please submit them to: Credits APOGEE, APOGEE GO, InfoCenter Administrator, InfoCenter Report Manager, InfoCenter Server, InfoCenter Suite, and Insight are registered trademarks of Siemens Industry, Inc. Other product or company names mentioned herein may be the trademarks of their respective owners. Printed in the USA. 3

4 Copyright Notice 4

5 Table of Contents 16-Point Compact Series Field Panels Point Compact Series Field Panels Point Compact Series Field Panels PXC Compact Series HOA Modules PXM10T and PXM10S Operator Display Field Panel Cables and Network Accessories Smoke Legend

6 16-Point Compact Series Field Panels 16-Point Compact Series Field Panels All 16-point Compact Series field panels include the following: 24 MB memory (16 MB RAM) base and rooftop models 40 MB memory (32 MB RAM) F and F32 models Sensor supply 24 Vdc, 4.8W PXC-16 Supported Point Types. Configurable Points Dedicated Points Point Type Universal Input (UI) Points 1-3 Universal Input/Output (U) Points 4-8 Analog Output (AO) Points 9-11 Digital Input (DI) Points Digital Output (DO) Points Analog Input 4 Voltage 0 to 10 Vdc Current 4 to 20 ma RTD Pt 1K 1 RTD Ni 1K 2 Thermistor 10K NTC 3 Thermistor 100K NTC 3 Digital Input Analog Output Digital Output Status (Binary Input) Pulse Accumulator (Counter) Voltage 0 to 10 Vdc Binary/Digital Output 1) Platinum 1K 375 or 385 alpha. 2) Siemens, Johnson s, and DIN Standard Nickel. 3) 10K and 100K Type 2 and 10K Type 3. 4) Sensor supply 24 Vdc, 4.8W 6

7 16-Point Compact Series Field Panels PXC-16 Unitary Equipment ler Product Description Estimating ID Product Number Smoke Status a PXC Unitary Equipment ler, 16 point, BACnet MS/TP Includes the latest revision of 3.x APOGEE BACnet Firmware PXC Unitary Equipment ler, 16 point, BACnet MS/TP, Rooftop Model - PXC16.3-UCM.A S1 - PXC16.3-UCMR.A S2 PXC-16 Field Panels Product Description Estimating ID Product Number Smoke Status a PXC Compact, 16 point, BACnet/IP ALN Includes the latest revision of 3.x APOGEE BACnet Firmware. PXC Compact, 16 point, BACnet/IP ALN, P1 or MS/TP FLN Includes the latest revision of 3.x APOGEE BACnet Firmware. Additional license required: FLN support PXC Compact, 16 point, BACnet/IP ALN, FLN enabled Includes the latest revision of 3.x APOGEE BACnet Firmware. FLN license Included. PXC Compact, 16 point, Ethernet/IP ALN Includes the latest revision of 2.x APOGEE Firmware. PXC Compact, 16 point, RS-485 ALN (P1 PXC) Includes the latest revision of 2.x APOGEE Firmware PXC16.2-E.A S PXC16.2-EF.A S PXC16.2-EF32.A S PXC16.2-PE.A S PXC16.2-P.A S1 See the Smoke Legend below for more information. APOGEE Firmware Upgrade Product Estimating ID Product Number Description Smoke Status APOGEE Firmware Upgrade b) Latest English firmware revision upgrade. See the Smoke Legend below for more information. b) Firmware upgrades for APOGEE ALN field panels use the APOGEE FLT from the Commissioning Tool. 7

8 16-Point Compact Series Field Panels License Manager Product Estimating ID Product Number Description Smoke Status a FLN Support None LSM-FLN License to enable FLN support on PXC-16 or PXC-24 "F" models Virtual AEM Support None LSM-VAEM License to enable Virtual AEM support when the P2 ALN is connected to RS-485 Web Server None LSM-FPWEB License to enable BACnet Field Panel Web Server (PXC-36) or Web Services (PXC-16/24) Web Server Plus None LSM-FPWEBPL License to Enable BACnet Field Panel Web Server Plus functionality Web Server Plus Host None LSM- FPWEBPLHST License to Enable BACnet Field Panel Web Server Plus Host functionality Meter Proxy None LSM-EMP Meter proxy enables a locally-installed Siemens Compact controller to provide low-cost and reliable trend data collection, logging, and transmission of customer data from both Siemens and non-siemens sites. See the Smoke Legend below for more information. 8

9 24-Point Compact Series Field Panels 24-Point Compact Series Field Panels All 24-point Compact Series field panels include the following: 24 MB memory (16 MB RAM) base and rooftop models 40 MB memory (32 MB RAM) F and F32 models Sensor supply 24 Vdc, 4.8W PXC-24 Supported Point Types. Configurable Points Dedicated Points Point Type Universal Input (UI) Points 1-3 Universal Input/Output (U) Points 4-12 Super Universal (X) Points Analog Output (AO) Points Digital Output (DO) Points Analog Input 5 Voltage 0 to 10 Vdc Current 4 to 20 ma RTD Pt 1K 1 RTD Ni 1K 2 Thermistor 10K NTC 3 Thermistor 100K NTC 3 Digital Input Analog Output Digital Output Status (Binary Input) Pulse Accumulator (Counter) Voltage 0 to 10 Vdc Current 0 to 20 ma Binary/Digital Output 4 1) Platinum 1K 375 or 385 alpha. 2) Siemens, Johnson s, and DIN Standard Nickel. 3) 10K and 100K Type 2 and 10K Type 3. 4) Requires an external relay. 5) Sensor supply 24 Vdc, 4.8W 9

10 24-Point Compact Series Field Panels PXC-24 Unitary Equipment ler Product Description Estimating ID Product Number Smoke Status a PXC Unitary Equipment ler, 24 point, BACnet MS/TP Includes the latest revision of 3.x APOGEE BACnet Firmware. PXC Unitary Equipment ler, 24 point, BACnet MS/TP, Rooftop Model - PXC24.3-UCM.A S1 - PXC24.3-UCMR.A S2 PXC-24 Field Panels Product Description Estimating ID Product Number Smoke Status a PXC Compact, 24 point, BACnet/IP ALN Includes the latest revision of 3.x APOGEE BACnet Firmware. PXC Compact, 24 point, BACnet/IP ALN, P1 or MS/TP FLN Includes the latest revision of 3.x APOGEE BACnet Firmware. Additional license required: FLN support. PXC Compact, 24 point, BACnet/IP ALN, FLN enabled Includes the latest revision of 3.x APOGEE BACnet Firmware FLN license included. PXC Compact, 24 point, BACnet/IP ALN, rooftop Includes the latest revision of 3.x APOGEE BACnet Firmware. Designed for extended temperature range operation for the control of rooftop devices. PXC Compact, 24 point, BACnet/IP ALN, rooftop,, P1 or MS/TP FLN Includes the latest revision of 3.x APOGEE BACnet Firmware. Designed for extended temperature range operation for the control of rooftop devices. Additional license required: FLN support. PXC Compact, 24 point, Ethernet/IP ALN Includes the latest revision of 2.x APOGEE Firmware. PXC Compact, 24 point, Ethernet/IP or RS-485 ALN, P1 FLN or Remote Ethernet/IP (Virtual AEM) option. Factory default is Ethernet TCP/IP ALN. Includes the latest revision of 2.x APOGEE Firmware. Additional license required: P1 FLN or Remote Ethernet/IP (Virtual AEM). PXC Compact, 24 point, Ethernet/IP, P1 FLN enabled Includes the latest revision of 2.x APOGEE Firmware. FLN license included PXC24.2-E.A S PXC24.2-EF.A S PXC24.2-EF32 S PXC24.2-ER.A S PXC24.2-ERF.A S PXC24.2-PE.A S PXC24.2-PEF.A S PXC24.2-PEF32.A S1 10

11 24-Point Compact Series Field Panels Product Description Estimating ID Product Number Smoke Status a PXC Compact, 24 point, Ethernet/IP ALN, rooftop Includes the latest revision of 2.x APOGEE Firmware. Designed for extended temperature range operation for the control of rooftop devices. PXC Compact, 24 point, Ethernet/IP or RS-485 ALN, rooftop, P1 FLN or Remote Ethernet/IP (Virtual AEM) option. Factory default is Ethernet TCP/IP ALN. Includes the latest revision of 2.x APOGEE Firmware. Designed for extended temperature range operation for the control of rooftop devices. Additional license required: P1 FLN or Remote Ethernet/IP (Virtual AEM). PXC Compact, 24 point, RS-485 ALN Includes the latest revision of 2.x APOGEE Firmware. PXC Compact, 24 point, RS-485 ALN, rooftop Includes the latest revision of 2.x APOGEE Firmware. Designed for extended temperature range operation for the control of rooftop devices PXC24.2-PER.A S PXC24.2-PERF.A S PXC24.2-P.A S PXC24.2-PR.A S2 PXC Unitary Equipment ler, 24 point, BACnet MS/TP Includes the latest revision of 3.x APOGEE BACnet Firmware. PXC24.3-UCM.A S2 PXC Unitary Equipment ler, 24 point, BACnet MS/TP, Rooftop Model Includes the latest revision of 3.x APOGEE BACnet Firmware. Designed for extended temperature range operation for the control of rooftop devices. PXC24.3-UCMR.A S2 See the Smoke Legend below for more information. 11

12 24-Point Compact Series Field Panels APOGEE Firmware Upgrade Product Estimating ID Product Number Description Smoke Status APOGEE Firmware Upgrade b) Latest English firmware revision upgrade. See the Smoke Legend below for more information. b) Firmware upgrades for APOGEE ALN field panels use the APOGEE FLT from the Commissioning Tool. License Manager Product Estimating ID Product Number Description Smoke Status a FLN Support None LSM-FLN License to enable FLN support on PXC-16 or PXC-24 "F" models Virtual AEM Support None LSM-VAEM License to enable Virtual AEM support when the P2 ALN is connected to RS-485 Unitary Equipment ler (UEC) None LSM-24.A License to upgrade the UEC 24 to a PXC Compact 24 (PXC24.2-UCM.A only) Web Server None LSM-FPWEB License to enable BACnet Field Panel Web Server (PXC-36) or Web Services (PXC-16/24) Web Server Plus None LSM-FPWEBPL License to Enable BACnet Field Panel Web Server Plus functionality Web Server Plus Host None LSM- FPWEBPLHST License to Enable BACnet Field Panel Web Server Plus Host functionality Meter Proxy None LSM-EMP Meter proxy enables a locally-installed Siemens Compact controller to provide low-cost and reliable trend data collection, logging, and transmission of customer data from both Siemens and non-siemens sites. See the Smoke Legend below for more information. 12

13 36-Point Compact Series Field Panels 36-Point Compact Series Field Panels All 36-point Compact Series field panels include the following: 80 MB memory (64 MBRAM) Sensor supply 24 Vdc, 4.8W PXC-36 Supported Point Types. Configurable Points Dedicated Points Point Type Super Universal (X) Points 1-6 Universal Input/Output (U) Points 7-24 Digital Input (DI) Points Digital Output (DO) Points Analog Input 5 Voltage 0 to 10 Vdc Current 4 to 20 ma RTD Pt 1K 1 RTD Ni 1K 2 Thermistor 10K NTC 3 Thermistor 100K NTC 3 Digital Input Analog Output Digital Output Status (Binary Input) Pulse Accumulator (Counter) Voltage 0 to 10 Vdc Current 0 to 20 ma Binary/Digital Output 4 1) Platinum 1K 375 or 385 alpha. 2) Siemens, Johnson s, and DIN Standard Nickel. 3) 10K and 100K Type 2 and 10K Type 3. 4) Requires an external relay. 5) Sensor supply 24 Vdc, 4.8W 13

14 36-Point Compact Series Field Panels PXC-36 Field Panels Product Description Estimating ID Product Number Smoke Status a PXC Compact, 36 point, BACnet/IP or MS/TP ALN. Factory default is BACnet/IP ALN. Includes the latest revision of 3.x APOGEE Firmware. Additional license required: Island Bus, FLN support. PXC Compact, 36 point, BACnet/IP or MS/TP ALN, Island Bus, P1 or MS/TP FLN. Factory default is BACnet/IP ALN. Includes the latest revision of 3.x APOGEE Firmware FLN and Island Bus Support license included. PXC Compact, 36 point, Ethernet/IP or RS-485 ALN. Factory default is Ethernet TCP/IP ALN. Includes the latest revision of 2.x APOGEE Firmware Additional license required: Island Bus, FLN support. PXC Compact, 36 point, Ethernet/IP or RS-485 ALN, Island Bus, P1 FLN. Factory default is Ethernet TCP/IP ALN. Includes the latest revision of 2.x APOGEE Firmware FLN and Island Bus Support license included PXC36-E.A S PXC36-EF.A S PXC36-PE.A S PXC36-PEF.A S1 See the Smoke Legend below for more information. APOGEE Firmware Upgrade Product Estimating ID Product Number Description Smoke Status APOGEE Firmware Upgrade b) Latest English firmware revision upgrade. See the Smoke Legend below for more information. b) Firmware upgrades for APOGEE ALN field panels use the APOGEE FLT from the Commissioning Tool. 14

15 36-Point Compact Series Field Panels License Manager Product Estimating ID Product Number Description Smoke Status a FLN Support None LSM-FLN36.A License to enable FLN support on models PXC36- E.A and PXC36-PE.A Island Bus Support None LSM-IB36.A License to enable 4 TX-I/O modules on the Island Bus on models PXC36-E.A and PXC36-PE.A FLN and Island Bus Support None LSM-36.A License to enable 4 TX-I/O modules on the Island Bus and FLN support on models PXC36-E.A and PXC36-PE.A Field Panel GO None LSM-FPGO License to enable Field Panel GO Virtual AEM Support None LSM-VAEM License to enable Virtual AEM support when the P2 ALN is connected to RS-485 Web Server None LSM-FPWEB License to enable BACnet Field Panel Web Server (PXC-36) or Web Services (PXC-16/24) Web Server Plus None LSM-FPWEBPL License to Enable BACnet Field Panel Web Server Plus functionality Web Server Plus Host None LSM- FPWEBPLHST License to Enable BACnet Field Panel Web Server Plus Host functionality See the Smoke Legend below for more information. 15

16 PXM10T and PXM10S Operator Display PXC Compact Series HOA Modules Product Estimating ID Product Number Smoke Status 8-switch HOA (UL864) 5358 PXA8-M S1 b) 16-switch HOA (UL864) 5359 PXA16-M S1 b) 16-switch HOA (extended temp, UL 916) with HMI cable 5359 PXA16-MR S2 Serial cable required for HOA connection to non-rooftop variants of the 16-point and 24-point Compact Series (pack of 5) None PXA-HMI.CABLEP5 S2 Labels for HOA and TX-I/O Modules, pack of 100, letter format None TXA1.LLT-P100 PXM10T/S and HOA Remote Door Mount Kit None PXA-HMI.RMKIT See the Smoke Legend below for more information. b) When connected, allows for the host field panel to maintain its UL864 rating and be used in the smoke control strategy. However, the HOA module itself is not to be used as a component of the smoke control strategy. PXM10T and PXM10S Operator Display Product Product Number Smoke Status PXM10T ler mounted operator display with a single supervisory controller view (White backlight) PXM10S - ler mounted operator display with a single supervisory controller view (With point monitor feature and optional white or blue backlight). PXM10T S1 b) PXM10S S1 b) Serial cable required for connection to compact-16 and compact-24 (pack of 5). PXA-HMI.CABLEP5 N/A PXM10T/S and HOA Remote Door Mount Kit PXA-HMI.RMKIT 16

17 Smoke Legend Field Panel Cables and Network Accessories HMI (RJ-45) Accessories Product Estimating ID Product Number Description Smoke Status Cable, Field Panel to Computer (9-pin RS-232 female) Cable, Field Panel to Terminal (25-pin RS-232 female) Cable, Field Panel to Network Printer (DB 25-pin male) Cable with 9-pin RS-232 female and 6- pin RJ-11 male connections. None ft (2.1 m) cable with 25-pin female and 6-pin RJ-11 male connections. None ft (2.1 m) cable with DB 25-pin male and 6-pin RJ-11 male connections. Cable, MMI Extension Extends the field panel HMI port to the bottom of the enclosure. For printers or terminals outside the enclosure. Transformer None Optional 115 Vac power pack supplies 24 Vac to the Local User Interface (LUI). S1 Smoke Service Modem Kit Modem, U.S. Robotics Sportster 56K b) bps, V.92 modem with fax, U.S.A. and Canada Surge Suppressor, EDCO FAS- TEL200T Telephone Line Surge Suppressor Cable, Service Modem (25-pin RS-232 male, 3-wire) UL 864 UUKL-listed Smoke Ancillary Equipment Kit contains: Modem ( ) Surge Suppressor ( ) Cable ( ) Modem used in remote terminal applications. Preset to dial-up application. Requires UL 497A listed telephone line protection. Use only with Service Modem Cable ( ) and Surge Suppressor ( ). None UL497A transient suppressor to protect two-wire modems, comes with installation instruction. UL 864 UUKL Listed Smoke Subassembly. None Blue 7 ft (2.1 m) 3-wire cable with 25-pin male RS-232 and 6-pin RJ-11 male connections. S2 S3 c S1 PXM10T/S and HOA Remote Door Mount Kit None PXA- HMI.RMKIT Remote Door Mount Kit for PXM10T, PXM10S, or HOA. See the Smoke Legend for more information. b) The 56K bps modem allows the TIU application to run at the maximum speed of 19.2K bps. Older 9600 and 14.4K bps modems may be used at baud rates up to 9600 bps. Maximum speed may be limited by line conditions. c) When the Smoke Listed modem and suppressor are installed together in a field panel, the combination does not degrade the field panel smoke control rating. An approved modem installed without the suppressor will degrade a field panel's smoke control rating. 17

18 Smoke Legend USB Device Port Accessories (Type B Male) Product Estimating ID Product Number Description Smoke Status a USB Cable None N/A b Cable USB (1.0 or 2.0) 4 pin Type A Male to Type B Male, length as needed. Used for connecting the Device port to a Host. See the Smoke Legend for more information. b) See Computer Suppliers listed in the Field Purchasing Guide. USB Host Port Accessories (Type A Male) Product Estimating ID Product Number Description Smoke Status Smoke Equipment Kit for the PXC Modular and PXC Compact; U.S.A. and Canada PXA- USBMODEMKIT UL 864 UUKL Listed Smoke Equipment Kit contains: Modem ( ) Surge Suppressor ( ) USB adapter (PXA-USBADAPTER) Serial cable ( ) Right Angle Adapter DB25M/F used for installation in enclosures which are less than 7 in. deep S2 b) Modem, U.S. Robotics Sportster 56K b bps, V.92 modem with fax, U.S.A. and Canada Surge Suppressor, EDCO FAS-TEL200T Telephone Line Surge Suppressor Adapter, USB Host port to (9-pin male RS-232), U.S.A. and Canada c) Serial Cable to connect Modem to PC, 9 pin Modem used in dial-up, auto-dial, and remote terminal applications. Preset to dial-up application. Requires UL 497A listed telephone line protection. Use only with Service Modem Cable ( ) and Surge Suppressor ( ). None UL497A transient suppressor to protect two-wire modems, includes installation instructions. UL 864 UUKL Listed Smoke Subassembly. N/A PXA-USBADAPTER USB to RS232 Serial Adapter. Connects USB Host port to 9-pin male RS232. Performs data translation. Required for UL Listed modems or UL Listed printers that are not configured for USB communication ' cable, 9-pin female to 25-pin male. Connects PXA-USBADAPTER to Modem or Right Angle Adapter S3 b) S2 S2 b) Adapter, 25-pin male/female, right angle N/A Local Purchase DG9025MF1 (mfg. L-com, Inc.) Low Profile Right Angle Adapter, DB25 M/F, Cable Exit 1. Optional, place between PC cable and Modem where fit in enclosure does not allow direct connection. 18

19 Smoke Legend Product Estimating ID Product Number Description Smoke Status USB Printer EPSON FX-890 c Dot Matrix Printer with USB, Parallel and EPSON Type B slot for optional RS-232 Serial card. USB Cable N/A c Cable USB (1.0 or 2.0) 4-pin Type A Male to Type B Male, length as needed. Used for connecting the Host port to a Device. See the Smoke Legend for more information. b) When the Smoke Listed modem and suppressor are installed together in a field panel, the combination does not degrade the field panel smoke control rating. An approved modem installed without the suppressor will degrade a field panel s smoke control rating from S2 to S3. c) See Computer Suppliers listed in the Field Purchasing Guide. Smoke Legend All products have been evaluated for use on a smoke control network. Use the information below to determine if a product can be used for smoke control. Code S1 S2 S3 Smoke Status Can be used for smoke control. Can be connected to a smoke control network but may not perform any smoke control functions. Cannot be connected to a smoke control network. Does not affect a smoke control network. NOTE: Both a UL864-approved enclosure and service box must be used for smoke control applications. 19

20 Issued by Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Pkwy Buffalo Grove IL Tel Siemens Industry, Inc., 2017 Technical specifications and availability subject to change without notice. Document ID (NA) Edition Restricted