Product Overview ManMachine

Transcription

1 Product Overview ManMachine EN

2 ManMachine Electronic-Key-System EKS RS232 seriell ETHERNET pproval Features/specific advantages Version FS FS FS compact compact compact compact (P 6 GF3 gray) (P 6 GF3 gray) (P 6 GF3 gray) (P 6 GF3 gray) mbient temperature at U =DC 24 V to +55 C to +55 C to +55 C to +55 C General Mounting cut-out acc. to DIN x 68 mm 33 x 68 mm 33 x 68 mm 33 x 68 mm Operating voltage U (regulated, residual ripple < 5 %) Current consumption, max. 2 to 28 V DC 2 to 28 V DC 2 to 28 V DC m m 5 m 5 m Degree of protection acc. to IEC 6529 IP65, IP67 installed IP65, IP67 installed IP65, IP67 installed IP65, IP67 installed Interface to the PC or to the control system serial, RS232/ US Full Speed Ethernet IEEE82.3 RS485 Transfer protocol 3964R ctivex - Modul as protocol driver 3964R ctivex - Modul as protocol driver TCP/IP ctivex - Modul as protocol driver PROFIUS DP acc. to IEC 658 IEC Interface, data transfer Data transfer rate type for power supply Interface connection type 9.6 kaud 9.6 kaud / Mit/s Via US 9.6 to 5 kit/s.5 to 2 Mit/s Sub-D 9-pole US type RJ45 Sub-D 9-pole Cable length, max. LED indicator RS232 5 m/ m 3 m m to 2 m System overview The Electronic-Key-System EKS is used for electronic access management. It makes it possible to also log product parameters and operator entries (e. g. in accordance with FD standard 2 CFR part ). The Electronic-Key, in the form of a robust tag, contains a data carrier and an antenna (transponder). The data carrier has a combined read/write and fixed-code memory (see table Electronic-Key memory structure). In operation the Electronic-Key placed inserted into the Electronic-Key adapter. The data are transferred between the Electronic-Key adapter and the Electronic-Key without using any contacts. The Electronic-Keys are available in different colors. The colors can be used, for example, to indicate the different levels of access rights. Electronic-Key memory structure E 2 PROM (programmable) ROM (serial number) Version FS s an alternative the Electronic-Key adapters with US, Ethernet TCP/IP, PROFIUS, PROFINET interface and EKS Light are available in the FS (For Safety pplications) version. These devices have a second channel, which is available as an additional semiconductor switching contact. This switching contact is used in connection with functionally safe applications. The evaluable function in terms of safety engineering involves reliable recognition that no Electronic-Key has been placed. Key management using the Electronic-Key-Manager EKM With the Electronic-Key-Manager EKM EUCHNER also provides a flexible PC software package for programming and managing Electronic-Keys. The freely programmable memory on the Electronic-Key can be structured exactly as required using EKM. The full version of EKM is based on a client/server architecture with central database. yte no. [dec] yte no. [hex] Quantity: 6 bytes Quantity: 8 bytes

3 ManMachine Light pproval FS FS FS FS compact modular compact modular (P 6 GF3 gray) to +55 C 33 x 68 mm (PVDF GF3 grey)/(p6.6) -2 to + C/ to +55 C Hole Ø 22.5/ DIN rail 35 mm (P 6 GF3 gray) -2 to +7 C 33 x 68 mm (PVDF GF3 gray)/(p6.6) -2 to + C/ -2 to +7 C Hole Ø 22,5 / DIN rail 35 mm 2 to 28 V DC 2 to 28 V DC 9 to 28 V DC 9 to 28 V DC 5 m 5 m 7 m (without load) 7 m (without load) Environment Switching lever material Weight Mechanical life, min. mbient temperature with spring return switch mbient temperature with stayput switch Mounting Degree of protection to IEC 529 on actuating side with/without bellows IP65, IP67 installed IP65, IP67, IP69K installed IP65, IP67 installed IP65, IP67, IP69K installed Switching elements, max. IEEE82.3 Ethernet IEEE bit parallel / plus Strobe 4-bit parallel / plus Strobe PROFINET IO acc. to IEC 658 IEC and -2 PROFINET IO acc. to IEC 658 IEC and -2 binary coded via high/low level binary coded via high/low level / Mit/s / Mits/s Contact elements Switching principle Rated insulation voltage Ui RJ45 4-pole RJ45 2-/4-pole 5-pole 4-pole 4-pole m 5 m / m 5 m 5 m / 5 m Series EKS Light ccess the easy way... EKS Light is characterized by simple integration into the control system environment. fter the Electronic-Key is placed, the Electronic-Key s data are evaluated within the device as the first step, which permits automatic Electronic- Key recognition without the aid of the control system. Once the internal check of the data integrity is complete, an access level is issued at the data outputs. The EKS Light is a read-only system with integrated evaluation electronics and interface. The access level is output via a 4-bit parallel interface. The parallel interface offers the advantage of transparent depiction of the data and therefore simple connection directly to the inputs of a control system or a switching device. Rated impulse withstand voltage Uimp Utilization category C 5 Utilization category DC 3 Switching current, min. at 24 V Switching voltage, min. Contact material Short circuit protection (control circuit fuse) Number of actuating directions, max. ll-round actuation R (spring return switch only) Switching per direction Pushbutton D available available on request ll given data refer to the respective minimum o Compact and modular design The EKS with PROFINET interface and the EKS Light are available in compact and modular design. In the compact version, the Electronic-Key adapter and the electronics form a unit. The Electronic-Key latches into the Electronic-Key adapter and is retained there. In the modular version, by contrast, the Electronic-Key adapter is mounted spatially separate from the electronics. The modular Electronic-Key adapter allows the Electronic- Key to be placed by hooking on the front side. Thanks to the shallow installation depth, installation is possible even in tight spaces. The design was realized with a view to applications in hygienically sensitive areas.

4 s WK WE K KF KE KC thermo/ aluminium thermo/ aluminium thermo thermo thermo thermo/ aluminium stainless steel galvanized steel stainless steel stainless steel stainless steel galvanized steel approx..7 kg approx..65 kg approx..2 kg approx..2 kg approx.. kg approx..75 kg x 6 x 6 x 6 x 6 x 6 x 6-5 to +65 C -5 to +65 C -5 to +65 C -5 to +65 C -25 to +65 C -5 to +65 C -25 to +65 C -25 to +65 C -25 to +65 C -25 to +65 C -25 to +65 C -25 to +65 C IEC D3 Front panel installation IEC D3 IEC D22 IEC D22 front panel installation IP 65/IP 54 IP65/IP54 IP65 IP65 IP65 IP65/IP per direction tab connector tab connector/ tab connector/ tab connector/ C IEC C IEC C IEC C IEC C IEC C IEC V 25 V 25 V 25 V 25 V 25 V 2.5 kv 2.5 kv 2.5 kv 2.5 kv 2.5 kv 2.5 kv 23V/4 23V/ 23V/5 23V/5 23V/4 23V/4 24V/2 24V/4 24V/3 24V/3 24V/2 24V/2 2 m 5 m m m 2 m 2 m V 24 V 2 V 2 V V V silver alloy silver alloy silver alloy silver alloy silver alloy silver alloy T6/F T6/F25 T/F2 T/F2 T/F2 T6/F not available Further information is available at r maximum values for the entire series.

5 ManMachine Hand-Held Pendant Stations H HL HLS HM Kit available pprovals Housing Color Weight Operating temperature Storage temperature Degree of protection acc. to EN 6529/NEM gray RL 74 gray RL 73 gray RL 73 anthracite approx..8 kg approx. 2. kg approx. 2.2 kg approx.. kg to +5 C to +5 C to +5 C to +5 C -2 to +5 C -2 to +55 C -2 to +55 C -2 to +55 C IP65 / 25-2 IP65 / 25-2 IP65 / 25-2 IP65 / 25-2 spiral cable 3.5 m, cable 3.5 m straight, cable 3.5 m straight, cable 3.5 m straight, Selector switches 2 x 6 3 x 2 2 x 2 2 x 6 Membrane keypad Enabling switches 3 2 2/3-stage 2/3-stage 2-stage 2-/3-stage Features EMERGENCY STOP device acc. to EN 382 pulses uttons Key-operated switch 3 6 Interface (handwheel) (handwheel) serial, 3964R protocol (handwheel) Kits for hand-held pendant stations To enable you to use ergonomically designed housings even for small quantities, e. g. prototypes or special versions, EUCHNER provides kits for hand-held pendant stations. s a result you can assemble a hand-held pendant station in a user-friendly housing to suit your requirements. Kit H Kit HL Kit HM Custom hand-held pendant stations Customized hand-held pendant stations based on the standard devices can also be produced in small quantities. EUCHNER offers the option of customized solutions so these ergonomically designed housings can be used for various requirements. available available on request not available ll given data refer to the respective minimum or maximum values for the entire series.

6 Environment ManMachine pproval Weight Mechanical life, min. Operating temperature Storage temperature tmospheric humidity, max. Front degree of protection, EN 6529/IEC 529 Front degree of protection, NEM Pulses per revolution HK HKC HKD aluminium aluminium aluminium /metal /metal.95 kg.25 kg.5 kg. kg.25 kg 5 x 6 5 x 6 2 x 6 x 6 x 6 to +5 C to +5 C to +7 C to +5 C to +5 C -2 to +5 C -2 to +5 C -25 to +85 C -2 to +5 C -2 to +5 C 8 % 8 % 8 % 8 % 8 % IP65 IP65 IP65 IP65 IP or, 2 signals each (/), 9 offset 25 or, 2 signals each (/), 9 offset Electronic s 25 or, 2 signals each (/), 9 offset HW 25 or, 2 signals each (/), 9 offset HW 25 or, 2 signals each (/), 9 offset /8 Subject to technical modifications without notice, no liability will be assumed for any detail. EUCHNER GmbH + Co. KG T Detent mechanism Detent Shaft loading, axial, max. Shaft loading, radial, max. Resistance to vibration Vibration (3 axes) Shock (3 axes) magnetic magnetic magnetic mechanical mechanical 25 N 25 N 25 N 25N 25N 4 N 4 N 4 N 4N 4N DIN/IEC DIN/IEC DIN/IEC DIN/IEC DIN/IEC DIN/IEC EMC protection requirement acc. to CE EN EN EN EN EN EN Output circuit S S ribbon cable V, S T T EUCHNER GmbH + Co. KG Kohlhammerstraße Leinfelden-Echterdingen Germany Tel Fax info@euchner.de