Proportional throttle cartridges type LIQZO-L*, 2-way high dynamics, with two position transducers, ISO 7368 sizes from 16 to 100
|
|
- Amberly Foster
- 6 years ago
- Views:
Transcription
1 Table F00/E Proportional throttle cartridges tpe LIQZOL*, wa high dnamics, with two position transducers, ISO 768 sizes from 6 to 00 Poppet Sleeve Main stage position transducer Pilot valve Integral electronics Communication connector Main connector Pilot valve position transducer MODEL CODE LIQZO LES PS 5 L / * ** /* Flow control valve L = with two integral position transducers LE = as L plus integral electronics LES = as L plus integral digital electronics Communication interfaces (onl for LES) PS = Serial BC = CANopen BP = PROFIBUS DP Valve size, see section LIQZOLESPS6L Series number Snthetic fluids: WG = waterglcol PE = phosphate ester Electronic options for LE execution see section 6: F =fault signal I =current reference input and monitor ( 0 ma) Q =enable signal Z =enable, fault and monitor signal Electronic options for LES execution see section 8: I =current reference input and monitor ( 0 ma) Z =double power suppl, enable, fault and monitor LIQZOL* are wa proportional cartridge valves, with double position transducer which provide both directional and non compensated flow control according to electronic reference signal. The operate in association with electronic drivers, see section, which suppl the proportional valves with proper current to align valve regulation to the reference signal supplied to the electronic driver. The are available in different executions: L, with two integral position transducers, ; LE, LES as L plus analogue (LE) or digital (LES) integral electronics. The regulation is operated b means of a poppet with double piloting area sliding into a sleeve and provided of integral LVDT position transducer. The spool is operated b means of a high performances proportional directional valve in rugged executions to withstand high vibrations and mechanical stresses (tpe DLZO for cartridge dimensions up to size 50 and tpe DLKZOR for cartridge dimensions up to size 00) see tab. F80, provided of high precision sleeve and LVDT position transducer for maximum regulating accurac and dnamic response. It is controlled in double closed loop position b means of the LVDT position transducers and. The integral electronics ensures factor presetting, fine functionalit plus valvetovalve interchangeabilit and simplified wiring and installation. Standard 7 pin main connector is used for power suppl, analog input reference and monitor signals. pin connector is used for options /Z. Following communication interfaces are available for the digital LES execution: PS, Serial communication interface. The valve reference signal is provided with analogue commands BC, CANopen interface BP, PROFIBUS DP interface The valves with BC and BP interfaces can be integrated into a fieldbus communication network and thus digitall operated b the machine control unit. Tpical applications: plastic injection and blow moulding, ceramics, punching & nibbling machines, diecasting, foundr and sheet machiner; Mounting surface: ISO 768 Sizes from 6 to 00; Max flow up to 700 l/min with differential pressure Δp = 5 bar, see section ; Max pressure = 50 bar. Valve configuration, see section = wa Spool tpe (regulating characteristics): L = linear ELECTRONIC DRIVERS Valve model Drivers model Data sheet L EMEL G50 LE ERILE G00 LES ERILES G0 Note: For power suppl and communication connector see section F0
2 YDRAULIC CARACTERISTICS (based on mineral oil ISO VG 6 at 50 C) draulic smbols Model Size Max regulated flow [l/min] at Δp = 5 bar at Δp =0 bar Maximum flow Max pressure [bar] Nominal flow of pilot valve at Δp = 70 bar [l/min] Leakage of pilot valve at P = 00 bar [l/min] Response time 0 00% step signal [ms] Pilot volume [cm ] steresis [% of the max flow] Repeatabilit [% of the max flow] ,,6 Thermal drift zero point displacement < % at ΔT = 0 C Note: Above performance data refer to valves coupled with Atos electronic drivers, see section. Recommended piloting pressure is 0 60 bar. In case of long time shutdown of the hdraulic suppl to the pilot valve, the driver has to be switched off to avoid its overheating ,. LIQZOL , 5 7, ,7 8 9, LIQZOL* 50 0,% ± 0,% , LIQZOLE, LIQZOLES , , , GENERAL NOTES LIQZOL* proportional cartridges are CE marked according to the applicable Directives (e.g. Immunit/Emission EMC Directive and Low Voltage Directive). Installation, wirings and startup procedures must be performed according to the general prescriptions shown in table F00 and in the installation notes supplied with relevant components. The electrical signals of the valve (e.g. monitor signals) must not be directl used to activate safet functions, like to switchon/off the machine s safet components, as prescribed b the European standards (Safet requirements of fluid technolog sstems and componentshdraulics, EN89). 5 CONNECTIONS FOR L EXECUTION PIN SOLENOID POWER SUPPLY CONNECTOR Signal description SUPPLY SUPPLY GND PILOT VALVE POSITION TRANSDUCER CONNECTOR PIN Signal description OUTPUT SIGNAL SUPPLY 5 VDC SUPPLY +5 VDC GND MAIN STAGE POSITION TRANSDUCER CONNECTOR PIN SIZES 6 0 SIZE Signal description PIN Signal description OUTPUT SIGNAL OUTPUT SIGNAL SUPPLY 5 VDC NOT CONNECTED SUPPLY +5 VDC SUPPLY + VDC GND GND 6 ANALOG INTEGRAL DRIVERS LE OPTIONS Standard driver execution provides on the 7 pin main connector: Power suppl VDC must be appropriatel stabilized or rectified and filtered; a,5 A safet fuse is required in series to the driver power suppl Appl at least a 0000 μf/0 V capacitance to single phase rectifiers or a 700 μf/0 V capacitance to three phase rectifiers Reference input signal analogue differential input with ±0 VDC nominal range (pin D,E), proportional to desired valve spool position Monitor output signal analog output signal proportional to the actual valve s spool position with ±0 VDC nominal range Following options are available to adapt standard execution to special application requirements: 6. Option /F It provides a Fault output signal in place of the Monitor output signal, to indicate fault conditions of the driver (cable interruption of spool transducers or reference signal for /I option): Fault presence corresponds to 0 VDC, normal working corresponds to VDC. 6. Option /I It provides the 0 ma current reference and monitor signals instead of the standard ±0 VDC It is normall used in case of long distance between the machine control unit and the valve or where the reference signal can be affected b electrical noise; the valve functioning is disabled in case of reference signal cable breakage. 6. Option /Q It provides the possibilit to enable or disable the valve functioning without cutting the power suppl (the valve functioning is disabled but the driver current output stage is still active). To enable the driver suppl a VDC on the enable input signal. 6. Option /Z This option includes /F and /Q features, plus the Monitor output signal. When the driver is disabled (0 VDC on Enable signal) Fault output is forced to 0 VDC. 6.5 Possible combined options: /FI and /IZ
3 7 ANALOG INTEGRAL DRIVERS LE MAIN FUNCTIONS AND ELECTRONIC CONNECTIONS MAIN CONNECTOR 7 PIN STANDARD REGULATIONS AND LED (remove the rear cover) PIN OPTION /Z B: B: S: S: LED: SCALE positive bias adjust not working positive scale adjust not working OFF normal working; BIAS DIAGNOSTIC ON fault presence SPOOL POSITION SIGNAL (main stage) B B S S LED 7. ELECTRONIC CONNECTIONS 7 & PIN MAIN CONNECTORS Standard 7pin /Z option pin SIGNAL TECNICAL SPECIFICATIONS NOTES A V+ Power suppl VDC for solenoid power stage and driver logic Input power suppl B V0 Power suppl 0 VDC for solenoid power stage and driver logic Gnd power suppl C () 7 AGND Ground signal zero for MONITOR signal (for standard, /Z option) Gnd analog signal ENABLE Enable ( VDC) or disable (0 VDC) the driver (for /Q and /Z options) Input on/off signal D INPUT+ E 5 INPUT Reference analog differential input: 0 +0 VDC maximum range ( 0 ma for /I option) Input analog signal F () 6 MONITOR Monitor analog output: ±0 VDC maximum range ( 0 ma for /I option) Output analog signal FAULT Fault (0V) or normal working (V) (for /F and /Z options) Output on/off signal 8 R_ENABLE Repeat Enable output repetition of Enable input Output on/off signal 9 NC do not connect Output on/off signal 0 NC do not connect Output on/off signal G PE EART Internall connected to the driver housing Notes: () with /Q option ENABLE signal replaces AGND on pin C; MONITOR signal is reffered to pin B () with /F option FAULT signal replaces MONITOR on pin F. A minimum time of 50ms to 00ms have be considered between the driver energizing with the VDC power suppl and when the valve is read to operate. During this time the current to the valve coils is switched to zero. 8 DIGITAL INTEGRAL DRIVERS LES OPTIONS Standard driver execution provides on the 7 pin main connector: Power suppl VDC must be appropriatel stabilized or rectified and filtered; a,5 A safet fuse is required in series to each driver power suppl Appl at least a 0000 μf/0 V capacitance to single phase rectifiers or a 700 μf/0 V capacitance to three phase rectifiers Reference input signal analogue differential input with ±0VDC nominal range (pin D,E), proportional to desired valve spool position Monitor output signal analog output signal proportional to the actual valve s spool position with ±0VDC nominal range Following options are available to adapt standard execution to special application requirements: 8. Option /I It provides 0 ma current reference and monitor signals instead of the standard ±0 V. It is normall used in case of long distance between the machine control unit and the valve or where the reference signal can be affected b electrical noise; the valve functioning is disabled in case of reference signal cable breakage. 8. Option /Z It provides on a pin main connector the above standard features plus: Logic power suppl Option /Z provides separate power suppl for the solenoid (pin, ) and for the digital electronic circuits (pin 9, 0). Cutting solenoid power suppl allows to interrupt the valve functioning but keeping energized the digital electronics thus avoiding fault conditions of the machine fieldbus controller (e.g. for emergenc, as provided b the European Norms EN95 for components with safet class ). Enable Input Signal To enable the driver suppl a VDC on pin referred to pin : when the Enable signal is set to zero the valve functioning is disabled (zero current to the solenoid) but the driver current output stage is still active. This condition does not compl with European Norms EN95. Fault Output Signal Fault output signal indicates fault conditions of the driver (solenoid short circuits/not connected, reference signal cable broken for 0mA input, etc.). Fault presence corresponds to 0 VDC, normal working corresponds to VDC (pin referred to pin ): Fault status is not affected b the Enable input signal 8. Possible combined options: /IZ F0
4 9 DIGITAL INTEGRAL DRIVERS LES MAIN FUNCTIONS AND ELECTRONIC CONNECTIONS MAIN CONNECTOR 7 PIN STANDARD COMMUNICATION CONNECTOR SCALE BIAS RAMPS 5 PIN Serial (PS) or CANopen (BC) PIN OPTION /Z, /SP, /SF and /SL CONNECTOR FOR REMOTE PRESSURE (FORCE) TRANDUCER (for /SP, /SF and /SL) LINEARIZATION FIELDBUS REFERENCE ENANCED DIAGNOSTIC SPOOL POSITION SIGNAL (main stage) 5 PIN reverse ke PROFIBUS DP (BP) 9. ELECTRONIC CONNECTIONS 7 & PIN MAIN CONNECTORS Standard 7pin Note: /Z option pin SIGNAL TECNICAL SPECIFICATIONS NOTES A V+ Power suppl VDC for solenoid power stage (and for driver logic on 7 pin connection) Input power suppl B V0 Power suppl 0 VDC for solenoid power stage (and for driver logic on 7 pin connection) Gnd power suppl ENABLE Enable ( VDC) or disable (0 VDC) the driver Input on/off signal D INPUT+ Reference analog input: 0 +0 VDC maximum range ( 0 ma for /I option) E INPUT standard: differential input; /Z option: common mode INPUT+ referred to AGND Input analog signal C 5 AGND Ground signal zero for MONITOR signal signal zero for INPUT+ signal (onl for /Z option) Gnd analog signal F 6 MONITOR Monitor analog output: ±0 VDC maximum range ( 0 ma for /I option) Output analog signal 7 NC do not connect 8 NC do not connect 9 VL+ Power suppl VDC for driver logic Input power suppl 0 VL0 Power suppl 0 VDC for driver logic Gnd power suppl FAULT Fault (0V) or normal working (V) Output on/off signal G PE EART Internall connected to the driver housing A minimum time of 00 to 500 ms have be considered between the driver energizing with the VDC power suppl and when the valve is read to operate. During this time the current to the valve coils is switched to zero. 9. ELECTRONIC CONNECTIONS 5 PIN COMMUNICATION CONNECTORS PS Serial BC CANopen BP PROFIBUS DP PIN SIGNAL TECNICAL SPECIFICATION SIGNAL TECNICAL SPECIFICATION SIGNAL TECNICAL SPECIFICATION NC do not connect CAN_SLD Shield +5V for termination NC do not connect NC do not connect LINEA Bus line (high) RS_GND Signal zero data line CAN_GND Signal zero data line DGND data line and termination Signal zero RS_RX Valves receiving data line CAN_ Bus line (high) LINEB Bus line (low) 5 RS_TX Valves transmitting data line CAN_L Bus line (low) SIELD 0 SOFTWARE TOOLS The functional parameters of the digital valves, as the bias, scale, ramp and linearization of the regulation characteristic, can be easil set and optimized with graphic interface b using the Atos ESW software and the relevant USB adapters, cable and terminators, see tab. G500. Valves with fieldbus communication interface (BC and BP) can be completel managed b the machine control unit; it is required to implement in the machine control the standard communication as described in the user manuals supplied with the relevant programming software. For detailed description of availabile fieldbus features, see tab. G50 MAIN CARACTERISTICS OF PROPORTIONAL DIRECTIONAL VALVES Assembl position An position Subplate surface finishing Roughness index, flatness ratio 0,0/00 (ISO 0) Ambient temperature 0 C +70 C for L execution; 0 C +60 C for LE and LES executions Fluid draulic oil as per DIN for other fluids see section Recommended viscosit 5 00 mm /s at 0 C (ISO VG 5 00) Fluid contamination class ISO 8/5 achieved with in line filters of 0 μm and β0 _>75 (recommended) Fluid temperature 0 C +60 C (standard and /WG seals) 0 C +80 C (/PE seals) Coil resistance R at 0 C Max. solenoid current Max. power Insulation class, Ω,6 A 5 Watt (80 ) Due to the occuring surface temperatures of the solenoid coils, the European standards ISO 7 and EN98 must be taken into account Protection degree (CEI EN6059) IP65 for L execution; IP65 67 for LE and LES executions, depending to the connector tpe (see sect. ) Dut factor Continuous rating (ED=00%)
5 DIAGRAMS (based on mineral oil ISO VG 6 at 50 C). Regulation diagrams = LIQZOL*6*. Bode diagrams stated at nominal hdraulic conditions = LIQZOL*6*: 0% 90% = LIQZOL*6*: 50% ± 5% Frequenc [z]. Regulation diagrams = LIQZOL*5* = LIQZOL**. Bode diagrams stated at nominal hdraulic conditions = LIQZOL*5*: 0% 90% = LIQZOL*5*: 50% ± 5% 5 = LIQZOL**: 0% 90% 6 = LIQZOL**: 50% ± 5% Frequenc [z].5 Regulation diagrams = LIQZOL*0* = LIQZOL*50*.6 Bode diagrams stated at nominal hdraulic conditions = LIQZOL*0*: 0% 90% = LIQZOL*0*: 50% ± 5% 5 = LIQZOL*50*: 0% 90% 6 = LIQZOL*50*: 50% ± 5% Frequenc [z].7 Regulation diagrams = LIQZOL*6* = LIQZOL*80* = LIQZOL*00*.8 Bode diagrams stated at nominal hdraulic conditions = LIQZOL*6*: 0% 90% 5 = LIQZOL*6*: 50% ± 5% 6 = LIQZOL*80*: 0% 90% 7 = LIQZOL*80*: 50% ± 5% 8 = LIQZOL*00*: 0% 90% 9 = LIQZOL*00*: 50% ± 5% Frequenc [z] Note: For the valves with digital electronics, the regulation characteristic can be modified b setting the internal software parameters, see tab. G Dnamic response The response times in section and the frequenc responses of the bode diagrams in section.,.,.6,.8, have to be considered as average values. For the valves with digital electronics the dnamics performances can be optimized b setting the internal software parameters. F0
6 INSTALLATION DIMENSIONS [mm] Size 6, 5, and 0 LIQZOL LIQZOLE LIQZOLES SP666 (onl for size 6) Size 50 LIQZOL LIQZOLE LIQZOLES SPZ5P/BP (for BP) SPZ5P (for PS and BC) SP666 SPZ7P or SPZM7P Size 6, 80 and 00 LIQZOL LIQZOLE LIQZOLES SPZ5P/BP (for BP) SPZ5P (for PS and BC) SP666 SPZ7P or SPZM7P SPZ7P or SPZM7P Size A B C D E F G Fastening bolts Tightening Weight (Kg) class.9 torque L LELES ,5 7 6 N M8x90 5 Nm 5,6 6, ,5 5,5 N Mx00 5 Nm 8, 8, N M6x60 00 Nm 0,9, ,5 7,5 N M0x Nm 6,7 7, 50 see drawing N M0x Nm,9, Ø N M0x0 N 8 Mx80 00 Nm 000 Nm 7,6,6 7, 00 Ø N 8 M0x0 00 Nm,5, LE* EXECUTION Dotted line = pin connector SPZP for option /Z Mounting surface and cavit: ISO 768 (see table P006) MODEL CODES OF POWER SUPPLY AND COMMUNICATION CONNECTORS (to be ordered separatel) VALVE VERSION L LE/Z LE, LES LES PS, BC LES BP LES /Z Power suppl Transducer CONNECTOR CODE SP666 SPZ7P SPZM7P SPZP SPZ5P SPZ5P/BP PROTECTION DEGREE IP65 IP65 IP67 IP67 IP65 IP67 IP67 DATA SEET K500 G00, G0, K500 G0, K500 connectors supplied with the valve /08
Proportional throttle cartridges type LIQZO-L*, 2-way high dynamics, with two position transducers, ISO 7368 sizes from 16 to 100
www.atos.com Table F00/E Proportional throttle cartridges tpe LIQZOL*, wa high dnamics, with two position transducers, ISO 768 sizes from 6 to Poppet Sleeve Main stage position transducer Pilot valve Integral
More informationProportional throttle cartridges type LIQZO-T*, 2-way with position transducer, ISO 7368 sizes from 16 to 50
www.atos.com Table F0-7/E Proportional throttle cartridges tpe LIQZO-T*, -wa with position transducer, ISO 768 sizes from 6 to 50 Poppet Sleeve Main stage position transducer Pilot valve Integral electronics
More informationProportional throttle cartridges type LIQZO-L*, 3-way high dynamics, with two position transducers, sizes from 25 to 80
www.atos.com Table F07/E Proptional throttle cartridges tpe LIQZOL*, wa high dnamics, with two position transducers, sizes from 5 to 80 Poppet Sleeve Main stage position transducer Pilot valve Integral
More informationProportional directional valves type DPZO-T* two stage, with position transducer, ISO 4401 sizes 10, 16 and 25
wwwatoscom Table F7-/E Proportional directional valves tpe DPZO-T* two stage, with position transducer, ISO 0 sizes 0, 6 and 5 DPZO-T* are two stage proportional valves with position transducer on the
More informationProportional 2-way throttle cartridges high dynamics, with two position transducers, ISO 7368 sizes from 16 to 100
www.atos.com Table F0/E Proportional way throttle cartridges high dynamics, with two position transducers, ISO 768 sizes from 6 to LE and LES executions included in this table are available only for running
More informationProportional relief valves type RZMO-A* with Pmax 500 bar direct operated, without integral pressure transducer, ISO 4401 size 06
able TF035-1/E Proportional relief valves tpe 110106 RZMO-A* with Pmax 500 bar direct operated, without integral pressure transducer, ISO 4401 size 06 9 10 Valve bod Proportional solenoid Spring Poppet
More informationProportional directional valves type DPZO-T* two stage, with position transducer, ISO 4401 sizes 10, 16 and 25
wwwatoscom Table F7-5/E Proportional directional valves tpe DPZO-T* two stage, with position transducer, ISO 0 sizes 0, 6 and 5 DPZO-T* are two stage proportional valves with position transducer on the
More informationServoproportional valves type DLHZO and DLKZOR
www.atos.com Table F180-16/E Servoproportional valves type DLZO and DLKZOR sleeve execution, direct operated, with position transducer, ISO 01 size 06 and 10 Valve body Spool Sleeve Proportional solenoid
More informationProportional throttle cartridges type LEQZO-A*, 2-way without position transducer, nominal sizes 16, 25 and 32
www.atos.com Table F310-5/E Proportional throttle cartridges type LEQZO-A*, 2-way without position transducer, nominal sizes 16, 25 and 32 Spool Cartridge Pilot valve Integral electronics Communication
More informationProportional relief valves type RZMO-A*
www.atos.com Table F007-9/E Proportional relief valves type RZMO-A* direct operated, without integral pressure transducer, ISO 440 size 06 Valve body Proportional solenoid Spring Poppet Integral electronics
More informationServoproportional valves type DLHZO-TE and DLKZOR-TE sleeve execution, direct operated, with position transducer, ISO 4401 size 06 and 10
www.atos.com Table F180-17/E Servoproportional valves type DLHZO-TE and DLKZOR-TE sleeve execution, direct operated, with position transducer, ISO 01 size 06 and 10 TE and TES executions included in this
More informationProportional relief valves type AGMZO-A* two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F035-19/E Proportional relief valves type AGMZO-A* two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32 Main poppet Pilot relief valve type RZMO Mechanical pilot
More informationProportional relief valves type RZMO-A* direct operated, without integral pressure transducer, ISO 4401 size 06
www.atos.com Table F007-20/E Proportional relief valves type RZMO-A* direct operated, without integral pressure transducer, ISO 440 size 06 Valve body Proportional solenoid Spring Poppet Integral electronics
More informationProportional relief valves type AGMZO-AES two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F035-20/E Proportional relief valves type AGMZO-AES two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32 1 MODEL CODE AGMZO Proportional pressure relief valve
More informationProportional directional valves type DHZO-TES and DKZOR-TES direct operated, with position transducer, ISO 4401 size 06 and 10
www.atos.com Table F65-/E Proportional directional valves type DZO-TES and DKZOR-TES direct operated, with position transducer, ISO 440 size 06 and 0 TE and TES executions included in this table are available
More informationProportional reducing valves type AGRCZO-AES two stages, normally closed, without integral pressure transducer, ISO 5781 size 10 and 20
www.atos.com Table F050-8/E Proportional reducing valves type AGRCZO-AES two stages, normally closed, without integral pressure transducer, ISO 5781 size 10 and 20 Main poppet Pilot relief valve type RZMO
More informationSeals material: omit for NBR (mineral oil & water glycol) PE = FPM. Series number
www.atos.com Table F40-6/E Proportional flow valves type QVHZO-AES, QVKZOR-AES pressure compensated, direct operated, without position transducer, ISO 440 size 06 and 0 AES execution included in this table
More informationProportional electrohydraulic controls for PVPC pumps pressure-flow combined P/Q controls, analog or digital
www.atos.com Table A70/E Proportional electrohydraulic controls for PVPC pumps pressureflow combined P/Q controls, analog or digital The variable displacement axial piston pumps type PVPC, can be supplied
More informationHigh Performance proportional 2-way cartridges with two position transducers, ISO 7368 sizes from 16 to 100
www.atos.com Table F330-2/E High Performance proportional 2-way cartridges with two position transducers, ISO 7368 sizes from 6 to 00 Poppet Sleeve Main stage position transducer Pilot valve Integral electronics
More informationProportional pressure valves with remote pressure transducer digital, closed loop high performances, rugged design
www.atos.com Table TFS100-1/E Proportional pressure valves with remote pressure transducer digital, closed loop high performances, rugged design T P RZMO-RES-N-NP-010 Proportional pressure relief and reducing
More informationProportional 2-way cartridges high performance rugged digital, with two position transducers, ISO 7368 sizes from 16 to 100
www.atos.com Table FS/E Proportional 2way cartridges high performance rugged digital, with two position transducers, ISO 7 sizes from to Poppet Sleeve Main stage position transducer Pilot valve Integral
More informationDigital electronic TES/LES drivers integral-to-valve format, for proportional valves with one or two spool position transducers
www.atos.com Table GS210-3/E Digital electronic TES/LES drivers integral-to-valve format, for proportional valves with one or two spool position transducers Scale Bias Linearization Ramps Real Time Fieldbus
More informationProportional 2-way cartridges high performance digital, with two position transducers, ISO 7368 sizes from 16 to 100, rugged design
Table FS330-4/E Proportional 2-way cartridges high performance digital, with two position transducers, ISO 7368 sizes from 6 to, rugged design Poppet Sleeve Main stage position transducer Pilot valve Integral
More informationDigital electronic REB/RES drivers integral-to-valve format, for proportional valves with integral pressure transducer
Table GS205-1/E Digital electronic RE/RES drivers integral-to-valve format, for proportional valves with integral pressure transducer RE, RES RZMO- RE - P - NP Not Present Digital drivers supply and control,
More informationServoproportional 3-way cartridges digital, with two position transducers, sizes from 25 to 80, rugged design
Table FS340-3/E Servoproportional 3-way cartridges digital, with two position transducers, sizes from 2 to 80, rugged design Main Spool Sleeve Main stage position transducer Pilot valve Integral electronics
More informationTWO CHANNELS REDUNDANT SAFETY ARCHITECTURE SINGLE CHANNEL NON-REDUNDANT SAFETY ARCHITECTURE
Table FY100-0/E Safety proportional valves with double power supply - option /U digital, direct or piloted operated, with one or two position transducers IEC 61508 Safety Integrity Level and ISO 13849
More informationHydraulic Power Limitation. Real Time Fieldbus Reference. Enhanced Diagnostic. E-SW programming software. Set code (see note) Series number
www.atos.com Table G215obs/E Digital electronic drivers type E-RI-PES integral-to-valve format, for variable displacement axial piston pumps with alternate P/Q control obsolete components - availability
More informationISO cartridge valves type LID* Check function, ISO 7368 size from 16 to 100, high flow, Pmax 420 bar
Table H0409/E ISO cartridge valves type LID* Check function, ISO 78 size from to 00, high flow, Pmax 40 bar Functional cover Poppet Sleeve LIDO Spring Pilot operated check valve LIDR Directional control
More informationTwo stage proportional directional valves high performance digital with two position transducers and positive spool overlap, rugged design
Table FS1753/E Two stage proportional directional valves high performance digital with two position transducers and positive spool overlap, rugged design Valve body Main stage Spool Pilot valve DPZOLESSNBP271
More informationProportional controls for PVPC pumps analog pressure or flow, digital P/Q controls
Table S702/E Proportional controls for PVPC pumps analog pressure or flow, digital P/Q controls pump body proportional valve integral electronics with P/Q controller USB connector PVPCPESSPBC4046 swash
More informationProgramming tools for digital electronics Atos PC software, USB adapters, cables and terminators
www.atos.com Table GS00-0/E Programming tools for digital electronics Atos PC software, adapters, cables and terminators POWER SUPPLY 4VDC Programming software Personal Computer Isolator Cable Proportional
More informationAnalog or Digital 08E001 RI-* drivers
www.atos.com Table T040obs/ Analog or igital 08001 RI-* drivers box format, for proportional valves with or without transducer(s) Scale Real-time ieldbus Reference ias nhanced iagnostic rey area: digital
More informationProgramming tools for digital electronics Atos PC software, USB adapters, cables and terminators
www.atos.com Table GS00-/E Programming tools for digital electronics Atos PC software, adapters, cables and terminators POWER SUPPLY 4VDC direct PC connection POWER SUPPLY 4VDC adapter PC connection Programming
More informationInclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationTM7NCOM16A CANopen interface block - IP67-16 I/O - M12
Characteristics CANopen interface block - IP67-16 I/O - M12 Main Range of product Product or component type Range compatibility Enclosure material Bus type [Ue] rated operational voltage Input/Output number
More informationFlow measurement FlexFlow PF20S Flow sensor for industrial applications
Product highlights Parallel measurement of flow and temperature Flow measurement independent of the mounting position Large measuring range up to 400 cm/s Measurement at high media temperatures up to 125
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integd mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up by automatic
More informationTemperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
More informationProgramming tools for digital electronics Atos PC software, USB adapters, cables and terminators
Atos spa - via alla Piana, 7 08 Sesto Calende - Varese - Italy COM BTH Table GS00-/E Programming tools for digital electronics Atos PC software, adapters, cables and terminators Digital electrohydraulic
More informationP/N: AX Distribute your control functions directly onto the valve.
TECHNICAL DATASHEET #TDAX022311 Dual Plug-In Valve Controller, CANopen 2-2.5A Outputs Programmable Distribute your control functions directly onto the valve. P/N: AX022311 Features: Configurable for 1
More informationTECHNICAL DATASHEET #TDAX023300
Preliminary TECHNICAL DATASHEET #TDAX023300 2 Universal Inputs, Dual Universal Valve Controller 2 Universal Inputs 2-3A Outputs CAN (SAE J1939) Configurable with Electronic Assistant P/N: AX023300 Features
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationLighting Controls and Connectivity scenecom. scenecom L, XL, XL EM and XL EM Bac scenecom Controller
L, XL, XL EM and XL EM Bac Controller Product description Independent lighting control for up to 192 DALI control gears on 3 DALI lines Simple setup via WEB interface Cross DALI line control Freel programmable
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive
More informationB&R X67_IO_System_V3.14_E. X67 - System
B&R X67_IO_System_V3.14_E X67 - System X67 I/O System - Benefits to the User Why I/Os in the IP67? Potential of the remote machine concept Cost reduction with remote I/O concept Reduced wiring Minimization
More informationLFC Liquid Flow Controller
LFC Liquid Flow Controller Type 879 can be combined with High dynamic control through fast flow measurement Applicable for liquid dosing up to 600 ml/min (6 l/h) No moving parts in medium Fieldbus optional
More informationMass Flow Meter (MFM) for Gases
871 Mass Flow Meter (MFM for Gases Type 871 can be combined with Direct flow measurement for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 in MEMS technology High accuracy Short response time
More informationModular pressure transmitters for harsh environments DST P500, DST P507 and DST P550
Data sheet Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550 The P500 / P507 / P550 utilizes the thin film strain gauge sensing technology, incorporating an hermetically
More informationElectronic Control Unit RC
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Electronic Control Unit RC RE 900/.0 /6 Replaces: 09.0 Series
More informationValve terminal RE-10 with Multi-pin, AS-Interface or bus connection 4 12 valve stations, 300 Nl/min (0.305 Cv)
Type of connection = AS = B1 = B6 Order code RE-10/08-M-1-060 Series Number of stations Multi-pin: 4, 6, 8, 10, 12 Bus versions: 4, 8, 12 Electrical options M-1 = Multi-pin D-Sub plug AS3 = AS-Interface
More informationCPX-Terminal. Brief description. CPX analogue I/O modules CPX-4AE CPX-2AA. English e [ ]
CPX-Terminal Brief description CPX analogue I/O modules CPX-2AE CPX-4AE CPX-2AA English 8080173 2017-11e [8080175] Translation of the original instructions Documentation on the product For all available
More informationSafety System CES-FD. Non-contact safety system CES-FD- Direct connection to decentralized peripheral systems (e.g. ET200pro) PLC
Non-contact safety system CES-FD- Evaluation of signals in the field Connection of CES read heads Connection to the ET200s and ET200pro Familiar EUCHNER AP interface Functional description Field evaluation
More informationTECHNICAL DATASHEET #TDAX023240
Preliminary TECHNICAL DATASHEET #TDAX023240 2 Quadrature Decoder Inputs, Dual Valve Controller 2 Quadrature Decoder Inputs 2-3A Outputs CAN (SAE J1939) Configurable with Electronic Assistant P/N: AX023240
More informationFlowtronic D 607 Series
Flowtronic D 607 Series Proportional Technology www.asco.com FLOW CONTROL: 607 SERIES FLOWTRONIC D Flowtronic D Flowtronic D is a digitally operated flow controller up to 70 SCFM (2000 Nl/min). The Flowtronic
More informationPhotoelectrics Retro-reflective, Polarized Type PA18C.P..., DC
Photoelectrics Retro-reflective, Polarized Type PA18C.P..., DC Miniature sensor range Range: 5 m (axial), 4 m (radial) Sensitivity adjustment by potentiometer Modulated, red light 625 nm Supply voltage:
More informationC-Flow Coriolis Mass Flow Meter
Coriolis Mass Flow Meter Application and Features For fluids (e.g. PU components, paints) and gases of high density Suitable for aggressive and contaminated media Measurement of mass flow, density, temperature
More informationPhotoelectrics Retro-reflective Type PA18C.R..., DC
Photoelectrics Retro-reflective Type PA18C.R..., DC Miniature sensor range Range: 6.5 m (Axial), 5 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to
More informationDigital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
More informationLinear Position Transducer HLT 1000-R2
Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 7 safety contacts (N/O), instantaneous 2 auxiliary contacts (N/C),
More informationicountpd Online Particle Detector
Online Particle Detector The icountpd from Parker represents the most up-to-date technology in solid particle detection. The design dynamics, attention to detail, and small size of the permanently mounted,
More informationDigital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
More informationATV32HU11M2437 variable speed drive ATV32-1.1kW 200V - 1P - Bluetooth built-in - w heat sink
Characteristics variable speed drive ATV32-1.1kW 200V - 1P - Bluetooth built-in - w heat sink Main Range of product Altivar 32 Product or component type Product destination Product specific application
More informationExpansion Module HZS 541-1S
Expansion Module HZS 541-1S 12.10.2015 Page 1 System Description The external HZS 541-1S expansion module provides users of biomass heating systems with additional 230 V AC relay outputs, analog inputs
More informationElectronic pressure switch with display Model PSD-4
Electronic pressure measurement Electronic pressure switch with display Model PSD-4 WIKA data sheet PE 81.86 Applications Machine tools Hydraulics and pneumatics Pumps and compressors Special-purpose machine
More informationSPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
More informationDistance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
More informationOperating instructions valve control box AS-i
THIS LEAFLET SHOULD BE KEPT IN A SAFE PLACE FOR REFERENCE Operating instructions valve control box AS-i 1 System description The Norgren Herion valve control box is used for controlling pneumatic swivel
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact stainless
More informationManual English. for the Devices of the MVK-MPNIO Safety Series MVK-MPNIO F DI16/8 Art. No and MVK-MPNIO F DI8/4 F DO4 Art. No.
Introduction For Your Safety Description Installation Startup Configuration Run Mode Maintenance and Cleaning Manual English for the Devices of the Series MVK-MPNIO F DI16/8 Art. No. 55560 and MVK-MPNIO
More informationTemperature measurement TER8 Front-flush and low-invasive resistance thermometers
Product highlights 3-A fulfillment without elastomers Front-flush or immersed types Accurate reading independent on ambient temperature Fast response time Hermetically sealed towards process Capable of
More informationPhotoelectrics Diffuse-reflective Type PA18C.D..., DC
Photoelectrics Diffuse-reflective Type PA18C.D..., DC Miniature sensor range Range: 1 m (Axial), 0.8 m (Radial) Sensitivity adjustment by potentiometer Modulated, red light 625 nm Supply voltage: to 30
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
More informationOBSOLETE. CanWorks itrax Two-Channel Control Unit Installation. Instruction Sheet P/N A
Instruction Sheet P/N 1047805A CanWorks itrax Two-Channel Installation WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other
More informationFieldbus System. New. New. Series EX260 IP67. Drives up to 32 solenoids. Daisy-chain wiring communication. Compact 28mm
Fieldbus System (Output device for driving port solenoid valves) Compact 8mm (Actual size) Space-saving Installation Daisy-chain wiring communication New IP67 For units with D-sub connector, and when connected
More informationElectric Actuators Type 5824 (without fail-safe action) Type 5825 (with fail-safe action)
Electric Actuators Type 5824 (without fail-safe action) Type 5825 (with fail-safe action) Application Electric actuators designed for valves used in heating, ventilation and air-conditioning systems as
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 5 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Connection
More informationProfi le PF. Contents. PF General data 106 Analog interface 108 IO-Link V Floating magnet 112 Captive magnet 114
Contents PF 106 Analog interface 108 IO-Link V1.1 110 Floating 112 Captive 114 www.balluff.com 105 Low-profile The robust design, high degree of protection and simple installation of Balluff Micropulse
More informationMINI MCR-SL-PT100-UI-200
Configurable temperature transducer for PT00 INTERFACE Data sheet 078_en_0 PHOENIX CONTACT 00-0-5 Description The MINI MCR-SL-PT00-UI-00... is a configurable -way isolated temperature transducer. It is
More informationPower Amplifiers for PVH-EDC Pumps
Vickers Accessories Power Amplifiers for PVH-EDC Pumps EEA-EDC-436-A*-32 Design A1 - For use with PVH57 & 74 A2 - For use with PVH98 A3 - For use with PVH131 Panel Display General Description These amplifiers
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. h y d r a u l i c s. Hydraulics Division Eaton / Char-Lynn Hydraulic Products
H y d r a u l i c s ydraulics Hydraulics Division Eaton / Char-Lynn Hydraulic Products h y d r a u l i c s We Manufacture No. 11-895 January 1999 Solutions S o l u t i o n 1 s Experienced system design
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
More informationLevel switch NS 10/NS 25..-AM
Level switch NS 10/NS 25..-AM Fluidcontrol Oil tanks in lubrication and oil supply systems are often under overpressure compared to the ambient atmosphere. All oil moistened parts of devices mounted externally
More informationRK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD
RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output
More informationTB3P/TB4P I/O PROFIBUS DP FIELDBUS MODULE FOR PNEUMATIC MANIFOLD VALVES. Pg. 1 di 14
TB3P/TB4P I/O PROFIBUS DP FIELDBUS MODULE FOR PNEUMATIC MANIFOLD VALVES Pg. 1 di 14 INDEX Legend of Symbols... 3 Conformity Declaration... 3 System Descripiton... 4 Module Specifications... 4 Installation
More informationInstallation Manual Series PQ-L. Electronic Module. Bulletin /UK
Bulletin 5715-571 /UK Installation Manual Electronic Module Gutenbergstr. 38 41564 Kaarst, Germany Tel.: (+) 2131-513-0 Fax: (+) 2131-513-230 www.parker.com Copyright Ó 2000, Note This document and other
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
More informationE-STOP relay, safety gate monitor
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection options
More informationElectronic Level Switch ENS 3000
Electronic Level Switch ENS 3000 Description: The ENS 3000 is an electronic level switch with integrated display. The instrument has 1, 2 or 4 switching outputs and an analogue output signal is available
More informationPositive-guided relay outputs: 4 safety contacts (N/O), instantaneous
ohne Abbildung Contact expansion module for increasing the number of available contacts Approvals PZE X4.1P with universal power supply Unit features Positive-guided relay outputs: 4 safety contacts (N/O),
More informationControl block CPX-CM-HPP
Key features New options for controlling drive technology The control block CPX-CM-HPP makes all of Festo s electric drive technology compatible with all industrial communication interfaces. CPX-CM-HPP
More information14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
More information26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
More informationVersaMax IP I/O Module
Module accepts four digital input signals and provides four digital outputs. It connects to a local bus that is interfaced to a Profibus-DP / PROFINET network by a Profibus Interface Unit (IC677PBI001)
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Automatic teach function Contact-free position sensor Compact stainless steel design AS-Interface
More informationMINI MCR-SL-PT100-UI. Active resistance thermometer measuring transducer. Data sheet. 1 Description
Active resistance thermometer measuring transducer Data sheet 099_en_06 PHOENIX CONTACT 0-0- Description The 6. mm wide MINI MCR-SL-PT00-UI-... is a configurable, -way isolated temperature measuring transducer.
More informationPositive-guided relay outputs: 4 safety contacts (N/O), instantaneous
Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous LED indicator for: Switch status channel
More information