THE COMPANY THE COMPANY

Transcription

1

2 THE COMPANY THE COMPANY Amphenol Australia Pty Ltd based in Melbourne is a subsidiary of Amphenol Corporation, a worldwide manufacturer and supplier of connector and interconnects products. We have been designing, manufacturing and marketing professional audio connectors for the world market since The AC series was introduced in the early 1990 s and pioneered the first patented Insulation Displacement Contact (IDC) audio connector. This product is widely used by audio OEM s throughout the world eliminaing solder fumes from the manufacturing process and improving productivity. Product development and improvement processes have introduced a number of new products to our range ensuring that Amphenol Australia continues to meet and exceed our customers expectations well into the 21st century. All products are produced in compliance with our ISO 9001 certification to ensure continuous quality you can rely on. Our engineering team offers a product design service for OEM s, and can develop custom connectors to suit specific applications. This catalogue features our entertainment connector and interconnect range. Other products produced at this facility include: Fibre optic cable assemblies, terminations and connector products as well as custom designed circular environmental and military connectors and interconnects products. Amphenol Corporation is one of the largest manufacturers of interconnect product in the world. The group designs, manufactures and markets RF/microwave connectors; flat ribbon cable and interconnect systems; CATV cable and connectors; electronic connectors; and fibre optic connectors and interconnect solutions. The primary end markets for Amphenol products are audio and lighting industries; communications and information processing, including cable television, cellular telephone, data communications and instrumentation; aerospace and military electronics; automotive, rail and other transportation; and industrial applications.

3 CONTENTS CATEGORY SUB CATEGORY CONTENTS PAGE AC SERIES XLR CABLE CONNECTORS PAGE 3 METAL SHELL TYPE - SOLDER THERMOPLASTIC SHELL TYPE - SOLDER 4 8 METAL SHELL TYPE - IDC (SOLDERLESS) 9 THERMOPLASTIC SHELL TYPE - IDC (SOLDERLESS) 11 AC SERIES XLR METAL Z CHASSIS MOUNT CONNECTORS PAGE 15 METAL D - TYPE FLANGE - SOLDER AND PCB METAL P - TYPE FLANGE - SOLDER AND PCB AC SERIES A-TYPE PAGE 27 THERMOPLASTIC XLR PCB CHASSIS MOUNT CONNECTORS THERMOPLASTIC A - TYPE FLANGE 28 AC SERIES XLR THERMOPLASTIC CHASSIS MOUNT CONNECTORS PAGE 37 THERMOPLASTIC D - TYPE FLANGE - SOLDER AND PCB THERMOPLASTIC P - TYPE FLANGE - SOLDER AND PCB THERMOPLASTIC TYPE - IDC (SOLDERLESS) 42 DUAL HOUSING THERMOPLASTIC TYPE - SOLDER AND PCB 45 AC PDN SERIES PAGE EP/AP SERIES HIGH POWER CONNECTORS PAGE 53 EP METAL TYPE - SOLDER AP THERMOPLASTIC TYPE - SOLDER AC SERIES ACCESSORIES PAGE RF CONNECTORS PAGE 61 BNC 75Ω CONNECTORS 62 BNC 75Ω ACCESSORIES AND TOOLING 65 1/4 PHONO PLUGS AND SOCKETS PAGE 71 1/4 (6.35mm) PHONO RCA AND BANANA PLUGS COMPLEMENTARY AMPHENOL PRODUCTS PAGE CONNECTOR WIRING INFORMATION PAGE 77 INDEX PAGE

4 AC SERIES XLR CABLE CONNECTORS ISO VIEW OF AC3MM ISO VIEW OF ACFI AMPHENOL AUSTRALIA WEBSITE AMPHENOL WORLD HEADQUARTERS WEBSITE 2

5 AC SERIES XLR CABLE CONNECTORS AC SERIES XLR CABLE CONNECTORS Amphenol Australia have been manufacturing and designing innovative XLR connectors since 1955 and were the first to offer the cost saving Insulation Displacement Contact (IDC) in an XLR connector. The IDC connector is ideal for Original Equipment Manufacturers and end users alike and offers an alternative to our standard solder connector. The AC series cable connector range complies with IEC and AES standards. CSA File Number Features AC series XLR connectors feature the unique Australian design and patented "Jaws" cable retention system for both standard Solder connectors and the Insulation Displacement Contact (IDC) connectors. A leading first mate last break socket contact is standard on all female connectors (Pin 1). The "Jaws" cable retention system provides up to 44kg (100lb) of strain. Solderless IDC technology offers savings of up to 60% in termination time. The AC series connector can be quickly and easily assembled without screws by hand or portable termination tool. (Part number T2860) Available in 3, 4, 5, 6A and 7 contact arrangements. Compatible with all other XLR brands. Options Solder Bucket termination Insulation Displacement Contact (IDC) Thermoplastic shell Zinc Diecast shell - Satin Nickel Finish Zinc Diecast shell - Black Polyester Finish Gold, Silver or Tin Plated contacts Bulk Style Packaging Single Bag packs Precision machined contacts Cost effective stamped contacts on 3 pole Options (Cont d) Jaws cable clamp, Cable O.D 3mm to 6.5mm (0.118" to 0.255") Large Jaws cable clamp, Cable O.D 6.5mm to 8mm (0.255" to 0.314") IDC Jaws cable clamp, Max. Cable O.D 5.85mm (0.23") Metal Boots / Backshells Coloured Boots / Backshells Coloured Identification rings Termination / Assembly tooling Jaws Cable Clamp Options Jaws cable clamp, Cable O.D 3mm to 6.5mm (0.118" to 0.255") Large Jaws cable clamp, Cable O.D 6.5mm to 8mm (0.255" to 0.314") Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. 3

6 AC SERIES XLR CABLE CONNECTORS METAL SHELL TYPE - SOLDER Features: Zinc Diecast Shell. Solder Bucket connections. "Jaws" Cable Retention System. Contact layouts in 3, 4, 5, 6A and 7. Precision machined or Stamped contacts. Leading first mate last break socket contact. Quick and easy assembly without screws by hand or portable termination tool. (Part number T2860.) Options: Stamped Contacts (3 contact only), Gold plated contacts, Large or Small Jaws Cable Clamp, Black Finish Shell,, Coloured Boots / Backshells Part Number Breakdown: Page 7 Specifications: Page PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, Nickel Finish, Jaws cable clamp XLR 3 pole male, Black Finish, Jaws cable clamp XLR 3 pole male, Stamped contacts, Nickel Finish, Jaws cable clamp XLR 3 pole male, Stamped contacts, Black Finish, Jaws cable clamp XLR 3 pole female, Stamped contacts, Nickel Finish, Jaws cable clamp XLR 3 pole female, Stamped contacts, Black Finish, Jaws cable clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp AC3MM AC3MM-AU AC3MMJ AC3MM BULK AC3MMB AC3MMB-AU AC3MMBJ AC3MMB BULK AC3M AC3M-AU AC3MJ AC3M BULK AC3MB AC3MB-AU AC3MBJ AC3MB BULK AC3F AC3F-AU AC3FJ AC3F BULK AC3FB AC3FB-AU AC3FBJ AC3FB BULK 4

7 AC SERIES XLR CABLE CONNECTORS METAL SHELL TYPE - SOLDER PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 4 pole male, Nickel Finish, Jaws cable clamp XLR 4 pole male, Black Finish, Jaws cable clamp XLR 4 pole female, Stamped contacts, Nickel Finish, Jaws cable clamp XLR 4 pole female, Stamped contacts, Black Finish, Jaws cable clamp XLR 5 pole male, Nickel Finish, Jaws cable clamp XLR 5 pole male, Black Finish, Jaws cable clamp XLR 5 pole female, Nickel Finish, Jaws cable clamp XLR 5 pole female, Black Finish, Jaws cable clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp AC4M AC4M-AU AC4MJ AC4M BULK AC4MB AC4MB-AU AC4MBJ AC4MB BULK AC4F AC4F-AU AC4FJ AC4F BULK AC4FB AC4FB-AU AC4FBJ AC4FB BULK AC5M AC5M-AU AC5MJ AC5M BULK AC5MB AC5MB-AU AC5MBJ AC5MB BULK AC5F AC5F-AU AC5FJ AC5F BULK AC5FB AC5FB-AU AC5FBJ AC5FB BULK 5

8 AC SERIES XLR CABLE CONNECTORS METAL SHELL TYPE - SOLDER PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 6A pole male, Nickel Finish, Jaws cable clamp XLR 6A pole male, Black Finish, Jaws cable clamp XLR 6A pole female, Nickel Finish, Jaws cable clamp XLR 6A pole female, Black Finish, Jaws cable clamp XLR 7 pole male, Gold plated Nickel Finish, Jaws cable clamp XLR 7 pole male, Gold plated Black Finish, Jaws cable clamp XLR 7 pole female, Gold plated Nickel Finish, Jaws cable clamp XLR 7 pole female, Gold plated Black Finish, Jaws cable clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp Large Cable Clamp AC6AM AC6AM-AU AC6AMJ AC6AM BULK AC6AMB AC6AMB-AU AC6AMBJ AC6AMB BULK AC6AF AC6AF-AU AC6AFJ AC6AF BULK AC6AFB AC6AFB-AU AC6AFBJ AC6AFB BULK AC7M AC7MJ AC7M BULK AC7MB AC7MBJ AC7MB BULK AC7F AC7FJ AC7F BULK AC7FB AC7FBJ AC7FB BULK 6

9 AC SERIES XLR CABLE CONNECTORS METAL SHELL TYPE - SOLDER PART NUMBER BREAKDOWN METAL SHELL TYPE - SOLDER SERIES PREFIX CONTACT LAYOUTS GENDER CONTACT SHELL FINISH CABLE CLAMP CONTACT PLATING PACKAGING AC 3 M M B J - AU BULK E. G. AC3MMBJ-AU BULK AC (Series Prefix), 3 contacts, Male, Machined Contacts, Black Polyester Finish, J (Large Jaws),- AU (), aged. SERIES PREFIX CONTACT LAYOUTS GENDER CONTACT SHELL FINISH CABLE CLAMP AC A 7 F M Blank M NOTE: Blank B Blank Series Prefix 3 Contacts 4 Contacts 5 Contacts 6 Contacts 7 Contacts Female Socket Contacts Male Pin Contacts Stamped Contacts Machined Contacts (Applicable 3 male pin contacts only) 4-7 contact connectors have machined contacts as standard. They are not available in stamped contacts. Nickel Plated Finish Black Polyester Finish Jaws 3 mm mm cable O.D. (0.118 to ) J Large Jaws 6.5mm - 8mm cable O.D. (0.255 to ) CONTACT PLATING Blank Plating ( Silver or Tin - Refer to Data.) PACKAGING AU Blank BULK NOTE: 7 Contact is gold plated as standard. Gold Plated Individual Bags ed Note: All AC Series Connectors are available with optional colour coded boot / backshell. Refer to page 60 and simply add colour to end of part number. Example: AC3MM - RED 7

10 AC SERIES XLR CABLE CONNECTORS THERMOPLASTIC SHELL TYPE - SOLDER Features: Thermoplastic Shell. Solder Bucket Connections. "Jaws" Cable Retention System. Stamped or Machined Contacts. Leading first mate last break socket contact. Quick and easy assembly without screws by hand or portable termination tool. (Part number T2860.) Options:, Stamped Contacts (3 Contact only),, Coloured Boots / Backshells 3, 4, 5, 6A and 7 Contacts. Specifications: Page PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, Thermoplastic shell, Jaws cable clamp AC3MMCP AC3MMCP-AU Large Cable Clamp AC3MMCPJ AC3MMCP BULK XLR 3 pole male, Stamped contacts, Thermoplastic shell, Jaws cable clamp AC3MCP AC3MCP-AU Large Cable Clamp AC3MCPJ AC3MCP BULK XLR 3 pole female, Stamped contacts, Thermoplastic shell, Jaws cable clamp AC3FCP AC3FCP-AU Large Cable Clamp AC3FCPJ AC3FCP BULK Note: Thermoplastic shell connectors are also available in 4-7 contact arrangements, please contact us for ordering code. ISO VIEW OF AC3MM 8

11 AC SERIES XLR CABLE CONNECTORS METAL SHELL TYPE - IDC The Insulation Displacement Contact (IDC) connector is ideal for Original Equipment Manufacturers and end users alike and offers an alternative to our standard solder connector. Connectors can be quickly and easily assembled without screws or a soldering iron by hand or portable termination tool. (Part number T2860.) Labour savings of up to 60% in termination time can be achieved. Recommended Cable Dimensions: Page 14 Features: Zinc Diecast Shell Available in 3 Contact only. Insulation Displacement Contacts (IDC - Solderless). "Jaws" Cable Retention System. Leading first mate last break socket contact. Options: Gold plated contacts, Black Finish Shell,, Coloured Boots / Backshells. Part Number Breakdown:Page 10 Specifications: Page13-14 Assembly Instructions: Page 12 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, IDC contacts, Nickel Finish, IDC Jaws cable clamp XLR 3 pole male, IDC contacts, Black Finish, IDC Jaws cable clamp XLR 3 pole female, IDC contacts, Nickel Finish, IDC Jaws cable clamp XLR 3 pole female, IDC contacts, Black Finish, IDC Jaws cable clamp AC3MI AC3MI-AU AC3MI BULK AC3MIB AC3MIB-AU AC3MIB BULK AC3FI AC3FI-AU AC3FI BULK AC3FIB AC3FIB-AU AC3FIB BULK Note: Amphenol can not guarantee the termination performance unless the recommended cable dimensions listed on page 14 are followed. ISO VIEW OF AC3FI 9

12 AC SERIES XLR CABLE CONNECTORS METAL SHELL TYPE - IDC PART NUMBER BREAKDOWN METAL SHELL TYPE - IDC SERIES PREFIX CONTACT LAYOUTS GENDER TERMINATION METHOD SHELL FINISH CONTACT PLATING PACKAGING AC 3 M I B - AU BULK E. G. AC3MIB-AU BULK AC (Series Prefix), 3 contacts, Male, IDC Contacts, Black Polyester Finish, - AU (), aged. SERIES PREFIX CONTACT LAYOUT GENDER AC 3 F M Series Prefix 3 Contact only Female Socket Contacts Male Pin Contacts TERMINATION METHOD I IDC Contacts SHELL FINISH CONTACT PLATING Blank B Nickel Plated Finish Black Polyester Finish Blank Plating ( Silver or Tin - Refer to Data.) PACKAGING AU Blank BULK Gold Plated Individual Bags ed Note: All AC Series Connectors are available with optional colour coded boot / backshell. Refer to page 60 and simply add colour to end of part number. Example: AC3MI - RED 10

13 AC SERIES XLR CABLE CONNECTORS THERMOPLASTIC SHELL TYPE - IDC The Insulation Displacement Contact (IDC) connector is ideal for Original Equipment Manufacturers and end users alike and offers an alternative to our standard solder connector. Connectors can be quickly and easily assembled without screws or a soldering iron by hand or portable termination tool. Labour savings of up to 60% in termination time can be achieved. Recommended Cable Dimensions: Page 14 Features: Thermoplastic Shell Available 3 Contact only. Insulation Displacement Contacts (IDC - Solderless). "Jaws" Cable Retention System. Leading first mate last break socket contact. Quick and easy assembly without screws by hand or portable termination tool. (Part number T2860.) Options: Gold plated contacts,, Coloured Boots / Backshells Part Number Breakdown:Page 11 Specifications: Page Assembly Instructions: Page 12 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, IDC contacts, Thermoplastic shell, IDC Jaws cable clamp XLR 3 pole female, IDC contacts, Thermoplastic shell, IDC Jaws cable clamp AC3MCPI AC3MCPI-AU AC3MCPI-BULK AC3FCPI AC3FCPI-AU AC3FCPI-BULK Note: Amphenol can not guarantee the termination performance unless the recommended cable dimensions listed on page 14 are followed. PART NUMBER BREAKDOWN IDC THERMOPLASTIC SHELL TYPE E. G. AC3MCPI-AU BULK AC (Series Prefix), 3 contacts, Male, CP (Thermoplastic Shell), IDC Contacts, - AU (), aged. SERIES PREFIX CONTACT LAYOUTS GENDER SHELL MATERIAL TERMINATION METHOD CONTACT PLATING PACKAGING AC 3 M CP I - AU BULK SERIES PREFIX CONTACT LAYOUT GENDER SHELL MATERIAL TERMINATION METHOD CONTACT PLATING PACKAGING AC 3 F M CP I Blank BULK Series Prefix 3 Contacts only Female Socket Contacts Male Pin Contacts Thermoplastic Shell IDC Contacts Blank Plating ( Silver or Tin - Refer to Data.) AU Gold Plated Individual Bags ed Note: All AC Series Connectors are available with optional colour coded boot / backshell. Refer to page 60 and simply add colour to end of part number. Example: AC3MCPI - RED 11

14 AC SERIES XLR CABLE CONNECTORS IDC ASSEMBLY INSTRUCTIONS 1 AC IDC SERIES CABLE ASSEMBLY INSTRUCTIONS 4 Push the cable through the boot assembly and strip the cable back 35 to 40 mm. Twist the shield wire. 2 6 For ground protection the twisted shield wire is clipped in place with the ground protect flap Fit the cable into the 'Jaws' cable clamp ensuring that the cable is pushed up to the neck of the clamp within 3mm. 3 Close the cable clamp slightly and push the boot over the clamp ensuring the wires fit inside the boot. 7 Trim back the shield wire, so there are no wires coming out of the flap and fit the 'Jaws' cable clamp into the shell assembly, ensuring the keyways are aligned. 12 Pull back the conductors into their individual wire guidetracks. Note: Two spring fingers in the clamp will hold the conductors in position during subsequent operations. The ends of the two insulated wires must be on or past the minimum wire length mark. Final assembly can be achieved either by manually screwing the boot on, or by using an Amphenol Australia T2860 termination tool.

15 AC SERIES XLR CABLE CONNECTORS STANDARD DATA STANDARD DATA AC CABLE CONNECTORS VALUE GENERAL CHARACTERISTICS Number of contacts AC Series Contact Arrangements (Front view of pin inserts) A 7 Termination IDC / SOLDER SOLDER SOLDER SOLDER SOLDER Max. Wire Gauge - Stranded wire: IDC 24AWG N/A N/A N/A N/A ELECTRICAL CHARACTERISTICS Solder Flammability rating of insulator plastics and housings Service Voltage RMS Test Voltage AC RMS 14AWG 16AWG 18AWG 18AWG 20AWG UL94V-0 133V 1400V 1) Current carrying capacity: IDC 1A N/A N/A N/A N/A CLIMATIC CHARACTERISTICS MECHANICAL CHARACTERISTICS Solder Typicial Contact Resistance Insulation Resistance Protection Class Operating Temperature Insertion and Withdrawal force Weight - Metal 2) 15A 10A 7.5A 7.5A 5A 3mΩ 1GΩ IP40-25 C to +75 C 10N - 30N 36g 37g 38g 38g 38g (0.080lb) (0.081lb) (0.083lb) (0.083lb) (0.083lb) 2) Weight - Thermoplastic 18g 19g 20g 20g 20g (0.039lb) (0.041lb) (0.044lb) (0.044lb) (0.044lb) Typical Cable retention force 22Kg to 44Kg (50lb to 100lb) - Dependant on cable material and diameter. Cable O.D. range - JAWS clamp IDC solder Max. Cable O.D. 5.85mm (0.23 ) 3mm to 6.5mm (0.118 to ) 1) 2) Large Solder 6.5mm to 8mm ( to ) Mechanical Operations 1000 mating cycles Not suitable for domestic applications above 50V Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes. 13

16 AC SERIES XLR CABLE CONNECTORS STANDARD DATA STANDARD DATA AC CABLE CONNECTORS DETAILS MATERIALS IDC RECOMMENDED CABLE DIMENSIONS Connector shell - Metal Shell finish Connector shell - Thermoplastic Shell finish Insulators Boot / Backshell Finish Cable clamp IDC Socket JAWS IDC Pin JAWS Solder JAWS Large Solder JAWS Cable Bushing Male Contact Stamped - IDC / Plating Stamped - Solder / Plating Machined - Solder / Plating Female Contact Stamped - IDC / Plating Stamped - Solder / Plating Machined - Solder / Plating Diecast Zinc Alloy Satin nickel or Black polyester Thermoplastic, UL94V-0 Modified PPE Resin Black UL94V-0 PBT Resin or Modified PPE Resin UL94V-0 Modified PPE Resin or Machined Brass Black, other colours available - see page 60 UL94V-0 Modified PPO Resin (Pink) UL94V-0 Modified PPO Resin (Blue) UL94V-0 Modified PPO Resin (Black) UL94V-0 Modified PPO Resin (Purple) Thermoplastic Polyurethane Phosphor Bronze / Silver or Gold (Optional) Phosphor Bronze / Silver or Gold (Optional) Brass / Silver or Gold (Optional) Phosphor Bronze / Tin or Gold (Optional) Phosphor Bronze / Tin or Gold (Optional) Brass / Silver or Gold (Optional) Max. 14

17 AC SERIES CHASSIS CONNECTORS AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS The metal chassis mount Z series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. This range complies with IEC and AES standards. CSA File Number Features The "D" size housing can be either front or rear mounted using the same panel cutout. The "P" size housing is the original wide flange front mounting XLR connector. "PN" is the original narrow flange front mounting male connector. A leading first mate last break socket contact is standard on all female connectors (Pin 1). Solder cup or versions. Connectors are fitted with a grounding system for RFI shielding applications. Available in 3, 4, 5, 6A and 7 contact arrangements. Compatible with all other XLR brands. Options Solder Bucket termination contacts Zinc Diecast Shell - Satin Nickel Finish Zinc Diecast Shell - Black Polyester Finish Gold, Silver or Tin Plated Contacts aging Single Bag packs Precision machined contacts Cost effective stamped contacts on 3 pole Latchless versions (Non-Latching) (Female only) Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases. The non-conductive Black polyester finish insulates the ground tag from the shell and should not be used in applications requiring ground contact to the shell. Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. 15

18 AC SERIES CHASSIS CONNECTORS METAL D TYPE FLANGE Features: Zinc Diecast Shell. D size housing can be front or rear mounted using the same panel cutout. Solder Bucket connections. mounting (not available in 4 contact female). Precision machined or Stamped contacts (3 pin only). Leading first mate last break socket contact. Positive latch lock system. Options: Stamped contacts (3 contact only), Gold plated contacts, contacts, Black finish, Non-Latching(Female only),. Part Number Breakdown: Page 24 Specifications: Page 25 PCB Footprints: Page 26 Panel Cutouts: Page 26 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, D Flange, Nickel Finish XLR 3 pole male, D Flange, Black Finish XLR 3 pole male, D Flange, Stamped contacts, Nickel Finish XLR 3 pole male, D Flange, Stamped contacts, Black Finish XLR 3 pole female, D Flange, Stamped contacts, Nickel Finish XLR 3 pole female, D Flange, Stamped contacts, Black Finish AC3MMDZ AC3MMDZ-AU AC3MMDZV AC3MMDZ BULK AC3MMDZB AC3MMDZB-AU AC3MMDZVB AC3MMDZB BULK AC3MDZ AC3MDZ-AU AC3MDZV AC3MDZ BULK AC3MDZB AC3MDZB-AU AC3MDZVB AC3MDZB BULK AC3FDZ AC3FDZ-AU AC3FDZV AC3FDZ BULK AC3FDZB AC3FDZB-AU AC3FDZVB AC3FDZB BULK 16

19 AC SERIES CHASSIS CONNECTORS METAL D TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 4 pole male, D Flange, Nickel Finish XLR 4 pole male, D Flange, Black Finish XLR 4 pole female, D Flange, Stamped contacts, Nickel Finish XLR 4 pole female, D Flange, Stamped contacts, Black Finish XLR 5 pole male, D Flange, Nickel Finish XLR 5 pole male, D Flange, Black Finish XLR 5 pole female, D Flange, Nickel Finish XLR 5 pole female, D Flange, Black Finish AC4MDZ AC4MDZ-AU AC4MDZV AC4MDZ BULK AC4MDZB AC4MDZB-AU AC4MDZVB AC4MDZB BULK AC4FDZ AC4FDZ-AU AC4FDZ BULK AC4FDZB AC4FDZB-AU AC4FDZB BULK AC5MDZ AC5MDZ-AU AC5MDZV AC5MDZ BULK AC5MDZB AC5MDZB-AU AC5MDZVB AC5MDZB BULK AC5FDZ AC5FDZ-AU AC5FDZV AC5FDZ BULK AC5FDZB AC5FDZB-AU AC5FDZVB AC5FDZB BULK 17

20 AC SERIES CHASSIS CONNECTORS METAL D TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 6A pole male, D Flange, Nickel Finish XLR 6A pole male, D Flange, Black Finish XLR 6A pole female, D Flange, Nickel Finish XLR 6A pole female, D Flange, Black Finish XLR 7 pole male, D Flange, Gold Plated Nickel Finish XLR 7 pole male, D Flange, Gold Plated Black Finish XLR 7 pole female, D Flange, Gold Plated Nickel Finish XLR 7 pole female, D Flange, Gold Plated Black Finish AC6AMDZ AC6AMDZ-AU AC6AMDZV AC6AMDZ BULK AC6AMDZB AC6AMDZB-AU AC6AMDZVB AC6AMDZB BULK AC6AFDZ AC6AFDZ-AU AC6AFDZV AC6AFDZ BULK AC6AFDZB AC6AFDZB-AU AC6AFDZVB AC6AFDZB BULK AC7MDZ AC7MDZV AC7MDZ BULK AC7MDZB AC7MDZVB AC7MDZB BULK AC7FDZ AC7FDZV AC7FDZ BULK AC7FDZB AC7FDZVB AC7FDZB BULK 18

21 AC SERIES CHASSIS CONNECTORS METAL P TYPE FLANGE Features: Zinc Diecast shell. The P size housing is the original wide flange front mounting XLR connector. PN is the original narrow, front mounting male connector. Solder Bucket connections. mounting. Precision Machined or Stamped contacts (3 pin only). Leading first mate last break socket contact. Positive latch lock system. Options: Stamped contacts (3 contact only), Gold plated contacts, contacts, Black Finish, Non-Latching (Female only),. Part Number Breakdown: Page 24 Specifications: Page 25 PCB Footprints: Page 26 Panel Cutouts: Page 26 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, Narrow flange, Nickel Finish XLR 3 pole male, Narrow flange, Black Finish XLR 3 pole male, Narrow flange, Stamped contacts, Nickel Finish XLR 3 pole male, Narrow flange, Stamped contacts, Black Finish XLR 3 pole male, Wide flange, Nickel Finish XLR 3 pole male, Wide flange, Black Finish AC3MMPNZ AC3MMPNZ-AU AC3MMPNZV AC3MMPNZ BULK AC3MMPNZB AC3MMPNZB-AU AC3MMPNZVB AC3MMPNZB BULK AC3MPNZ AC3MPNZ-AU AC3MPNZV AC3MPNZ BULK AC3MPNZB AC3MPNZB-AU AC3MPNZVB AC3MPNZB BULK AC3MMP AC3MMP-AU AC3MMPV AC3MMP BULK AC3MMPB AC3MMPB-AU AC3MMPVB AC3MMPB BULK 19

22 AC SERIES CHASSIS CONNECTORS METAL P TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, Wide flange, Stamped contacts, Nickel Finish XLR 3 pole male, Wide flange, Stamped contacts, Black Finish XLR 3 pole female, Wide flange, Stamped contacts, Nickel Finish XLR 3 pole female, Wide flange, Stamped contacts, Black Finish XLR 4 pole male, Narrow flange, Nickel Finish XLR 4 pole male, Narrow flange, Black Finish XLR 4 pole male, Wide flange, Nickel Finish XLR 4 pole male, Wide flange, Black Finish AC3MP AC3MP-AU AC3MPV AC3MP BULK AC3MPB AC3MPB-AU AC3MPVB AC3MPB BULK AC3FPZ AC3FPZ-AU AC3FPZV AC3FPZ BULK AC3FPZB AC3FPZB-AU AC3FPZVB AC3FPZB BULK AC4MPNZ AC4MPNZ-AU AC4MPNZV AC4MPNZ BULK AC4MPNZB AC4MPNZB-AU AC4MPNZVB AC4MPNZB BULK AC4MP AC4MP-AU AC4MPV AC4MP BULK AC4MPB AC4MPB-AU AC4MPVB AC4MPB BULK 20

23 AC SERIES CHASSIS CONNECTORS METAL P TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 4 pole female, Wide flange, Stamped contacts, Nickel Finish XLR 4 pole female, Wide flange, Stamped contacts, Black Finish XLR 5 pole male, Narrow flange, Nickel Finish XLR 5 pole male, Narrow flange, Black Finish XLR 5 pole male, Wide flange, Nickel Finish XLR 5 pole male, Wide flange, Black Finish XLR 5 pole female, Wide flange, Nickel Finish XLR 5 pole female, Wide flange, Black Finish AC4FPZ AC4FPZ- AU AC4FPZ BULK AC4FPZB AC4FPZB- AU AC4FPZB BULK AC5MPNZ AC5MPNZ- AU AC5MPNZV AC5MPNZ BULK AC5MPNZB AC5MPNZB- AU AC5MPNZVB AC5MPNZB BULK AC5MP AC5MP- AU AC5MPV AC5MP BULK AC5MPB AC5MPB- AU AC5MPVB AC5MPB BULK AC5FPZ AC5FPZ- AU AC5FPZV AC5FPZ BULK AC5FPZB AC5FPZB- AU AC5FPZVB AC5FPZB BULK 21

24 AC SERIES CHASSIS CONNECTORS METAL P TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 6A pole male, Narrow flange, Nickel Finish XLR 6A pole male, Narrow flange, Black Finish XLR 6A pole male, Wide flange, Nickel Finish XLR 6A pole male, Wide flange, Black Finish XLR 6A pole female, Wide flange, Nickel Finish XLR 6A pole female, Wide flange, Black Finish, XLR 7 pole male, Narrow flange, Gold Plated Nickel Finish XLR 7 pole male, Narrow flange, Gold Plated Black Finish AC6AMPNZ AC6AMPNZ- AU AC6AMPNZV AC6AMPNZ BULK AC6AMPNZB AC6AMPNZB- AU AC6AMPNZVB AC6AMPNZB BULK AC6AMP AC6AMP- AU AC6AMPV AC6AMP BULK AC6AMPB AC6AMPB- AU AC6AMPVB AC6AMPB BULK AC6AFPZ AC6AFPZ- AU AC6AFPZV AC6AFPZ BULK AC6AFPZB AC6AFPZB- AU AC6AFPZVB AC6AFPZB BULK AC7MPNZ AC7MPNZV AC7MPNZ BULK AC7MPNZB AC7MPNZVB AC7MPNZB BULK 22

25 AC SERIES CHASSIS CONNECTORS METAL P TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 7 pole male, Wide flange, Gold Plated Nickel Finish XLR 7 pole male, Wide flange, Gold Plated Black Finish XLR 7 pole female, Wide flange, Gold Plated Nickel Finish XLR 7 pole female, Wide flange, Gold Plated Black Finish AC7MP AC7MPV AC7MP BULK AC7MPB AC7MPVB AC7MPB BULK AC7FPZ AC7FPZV AC7FPZ BULK AC7FPZB AC7FPZVB AC7FPZB BULK 23

26 AC SERIES CHASSIS CONNECTORS METAL TYPE FLANGE PART NUMBER BREAKDOWN METAL TYPE FLANGE E. G. AC3MMPNZVB-AU BULK AC (Series Prefix), 3 contacts, Male, Machined Contacts, PN (Narrow Flange), Z (Metal Chassis Series), Vertical Printed Circuit Board, Black Polyester Finish, - AU (), aged. SERIES PREFIX CONTACT LAYOUTS GENDER CONTACT TYPE SHELL STYLE SHELL SERIES TERMINATION SHELL FINISH CONTACT PLATING PACKAGING AC 3 M M PN Z V B - AU BULK SERIES PREFIX CONTACT LAYOUTS GENDER MACHINED CONTACTS SHELL STYLE SHELL SERIES TERMINATION SHELL FINISH CONTACT PLATING PACKAGING AC A 7 F M Blank M NOTE: D P PN Blank Z Blank V Blank B Blank AU Blank BULK Series Prefix 3 Contacts 4 Contacts 5 Contacts 6 Contacts 7 Contacts Female Socket Contacts Male Pin Contacts Stamped Contacts Machined Contacts (Applicable 3 male pin contacts only) 4-7 contact connectors have machined contacts as standard. They are not available in stamped contacts. Small Flange(front or rear mounting) Large Shell with wide flange Large Shell with Narrow Flange (male only) Male P Shell Style only Metal Chassis Series Solder Buckets Vertical Printed Circuit Board Nickel Plated Finish Black Polyester Finish Plating ( Silver or Tin - Refer to Data.) NOTE: 7 Contact is gold plated as standard. Gold Plated Individual Bags ed 24 Note: Non-Latching Versions (Female) available - Please contact us for part No. options.

27 AC SERIES CHASSIS CONNECTORS STANDARD DATA STANDARD DATA AC SERIES CHASSIS - METAL Z VALUE GENERAL CHARACTERISTICS Number of contacts Contact Arrangement (Front view of pin inserts) A 7 Termination Solder Bucket / Printed Circuit Board (PCB) Max. Wire Gauge - Stranded wire: Solder 14AWG 16AWG 18AWG 18AWG 20AWG Printed Circuit Board - PCB N/A N/A N/A N/A N/A ELECTRICAL CHARACTERISTICS Flammability rating of plastics Service Voltage RMS Test Voltage AC RMS UL94V-0 133V 1400V 1) Current carrying capacity: Solder 15A 10A 7.5A 7.5A 5A Printed Circuit Board (PCB) 15A 10A 7.5A 7.5A 5A CLIMATIC CHARACTERISTICS Typicial Contact Resistance Insulation Resistance Protection Class Operating Temperature 3mΩ 1000MΩ IP40-25 C to +75 C MECHANICAL CHARACTERISTICS 2) Weight - Metal 31g 32g 33g 33g 33g (0.068lb) (0.070lb) (0.072lb) (0.072lb) (0.072lb) MATERIALS Mechanical Operations Connector Shell Shell Finish Insulators 1000 mating cycles Diecast Zinc Alloy Satin Nickel or Black Polyester UL94V-0 PBT Resin or Modified PPE Resin Male Contact Stamped Solder and PCB-(Material/Plating) Machined Solder-(Material/Plating) Phosphor Bronze / Silver or Gold (optional) Brass / Silver or Gold (optional) Female Contact Stamped Solder and PCB-(Material/Plating) Machined Solder-(Material/Plating) Phosphor Bronze / Tin or Gold (optional) Brass / Silver or Gold (optional) 1) 2) Not suitable for domestic applications above 50V Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes. 25

28 AC SERIES CHASSIS METAL Z PCB FOOTPRINTS STRAIGHT (V) - CONNECTOR SIDE OF PCB -FRONT VIEW AC SERIES CHASSIS CONNECTORS METAL TYPE FLANGE PANEL CUTOUT DIMENSIONS AC3F*ZV AC3M*ZV AC*FDZ AC3MM*ZV AC4M*ZV AC*MDZ AC5F*ZV AC5M*ZV AC*FPZ AC-PDN-31-XXX AC6AF*ZV AC6AM*ZV AC*MPNZ AC7F*ZV AC7M*ZV AC*MP AC-PDN-34-XXX 26

29 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE AC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS The AC series, A type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers (OEM) needs in mind. The compact shell design allows a significant space saving over the traditional D type shell. Gold plated contacts improve the performance, ensuring a reliable contact and the unique grounding link options offer flexibility in design. Features A leading first mate last break socket contact is standard on all female connectors (Pin 1). Vertical and Horizontal PCB versions available. Latching and Non-latching versions available. A range of different grounding options are available including: - Mating connector shell to Pin 1 - Mating connector shell to Chassis - Mating connector shell to pin 1 to Chassis Available in 3 contact arrangement only. Compatible with all other XLR brands. Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. Options contacts Horizontal PCB contacts Precision Machined Pin contacts Cost effective Stamped Socket contacts Gold Plated contacts () Silver Plated contacts (Optional) aging 27

30 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE Features: Thermoplastic Shell Industry standard PCB footprints. Vertical or Horizontal PCB mounting. Precision machined pin contacts. Gold plated contacts. Leading first mate last break socket contact. Bulk packed in trays, 100 to a box as standard. Positive latch lock system. Options: Silver plated contacts, Vertical or Horizontal PCB, Various grounding methods, Latching or Non-Latching. Part Number Breakdown:Page Specifications: Page 34 PCB Footprints: Page 35 Panel Cutouts: Page 36 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION GROUND LINK PART NUMBER VARIATIONS XLR 3 pole male, Horizontal PCB,, No Ground Link AC3MAH-AU-B XLR 3 pole male, Horizontal PCB,, Pin 1 to Chassis to Mating connector shell AC3MAH1-AU-B XLR 3 pole male, Horizontal PCB,, Mating connector shell to Chassis - Pin 1 sep. Ground AC3MAH2-AU-B XLR 3 pole male, Horizontal PCB,, Mating connector shell to Pin 1 AC3MAH3-AU-B XLR 3 pole male,,, No Ground Link AC3MAV-AU-B XLR 3 pole male,,, Pin 1 to Chassis to Mating connector shell AC3MAV1-AU-B 28

31 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION GROUND LINK PART NUMBER VARIATIONS XLR 3 pole male,,, Mating connector shell to Chassis - Pin 1 sep. Ground AC3MAV2-AU-B XLR 3 pole male,,, Mating connector shell to Pin 1 AC3MAV3-AU-B XLR 3 pole female, Horizontal PCB, Latching Type,, No Ground Link AC3FAH-AU-B XLR 3 pole female, Horizontal PCB, Latching Type,, Pin 1 to Chassis to Mating connector shell AC3FAH1-AU-B XLR 3 pole female, Horizontal PCB, Latching Type,, Mating connector shell to Chassis - Pin 1 sep. Ground AC3FAH2-AU-B XLR 3 pole female, Horizontal PCB, Latching Type,, Pin 1 to Chassis AC3FAH3-AU-B XLR 3 pole female, Horizontal PCB, Non-Latching Type, No Ground Link AC3FAHL-AU-B XLR 3 pole female, Horizontal PCB, Non-Latching Type, Pin 1 to Chassis to mating connector shell AC3FAHL1-AU-B 29

32 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION GROUND LINK PART NUMBER VARIATIONS XLR 3 pole female, Horizontal PCB, Non-Latching Type, Mating connector shell to Chassis - Pin 1 sep. Ground. AC3FAHL2-AU-B XLR 3 pole female, Horizontal PCB, Non-Latching Type, Pin 1 to Chassis AC3FAHL3-AU-B XLR 3 pole female,, Latching Type,, No Ground Link AC3FAV-AU-B XLR 3 pole female,, Latching Type,, Pin 1 to Chassis to mating connector shell AC3FAV1-AU-B XLR 3 pole female,, Latching Type,, Mating connector shell to Chassis - Pin 1 sep. Ground. AC3FAV2-AU-B XLR 3 pole female,, Latching Type,, Pin 1 to Chassis AC3FAV3-AU-B XLR 3 pole female,, Latching Type,,, Machined Contact Mount XLR 3 pole female,, Latching Type,,, Machined Contact Mount Mating connector shell to Chassis - Pin 1 sep. Ground. No Ground Link AC3FAV4-AU-B AC3FAV5-AU-B 30

33 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION GROUND LINK PART NUMBER VARIATIONS XLR 3 pole female,, Non-Latching Type,, No Ground Link AC3FAVL-AU-B XLR 3 pole female,, Non-Latching Type,, Pin 1 to Chassis to Mating connector shell AC3FAVL1-AU-B XLR 3 pole female,, Non-Latching Type,, Mating connector shell to Chassis - Pin 1 sep. Ground. AC3FAVL2-AU-B XLR 3 pole female,, Non-Latching Type,, Pin 1 to Chassis AC3FAVL3-AU-B XLR 3 pole female,, Non-Latching type,,, Machined Contact Mount XLR 3 pole female,, Non-Latching type,,, Machined Contact Mount Mating connector shell to Chassis - Pin 1 sep. Ground. No Ground Link AC3FAVL4-AU-B AC3FAVL5-AU-B 31

34 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE PART NUMBER BREAKDOWN AC SERIES A TYPE MALE SERIES PREFIX CONTACT LAYOUTS GENDER SHELL SERIES TERMINATION LOCKING MECHANISM GROUNDING OPTIONS CONTACT PLATING AC 3 M A V L 3 - AU B PACKAGING E. G. AC3MAVL3-AU BULK AC (series prefix),3 contacts, Male, A Type, Vertical Printed Circuit Board, Latchless, 3 (Mating Shell to Pin 1 Grounding), - AU (), aged. SERIES PREFIX CONTACT LAYOUT GENDER SHELL SERIES TERMINATION LOCKING MECHANISM GROUNDING LINK OPTIONS AC 3 M A H V Blank L Blank Series Prefix 3 Contacts only Male Pin Contacts A Type Horizontal Printed Circuit Board Vertical Printed Circuit Board Latching Latchless No Ground Link 1 Pin 1 to Chassis to mating connector shell 2 Mating connector shell to Chassis - Pin 1 sep. Ground. 3 Mating connector to Pin 1 CONTACT PLATING PACKAGING AU AG B Silver Plated Contacts (Non-) ed 32

35 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE PART NUMBER BREAKDOWN AC SERIES A TYPE FEMALE SERIES PREFIX CONTACT LAYOUTS GENDER SHELL SERIES TERMINATION GROUNDING OPTIONS LOCKING MECHANISM CONTACT PLATING AC 3 F A V L 3 - AU - B PACKAGING E. G. AC3FAVL3-AU BULK AC (series prefix),3 contacts, Female, A Type, Vertical Printed Circuit Board,Latchless, 3 (Pin 1 to Chassis Grounding), - AU (), aged. SERIES PREFIX CONTACT LAYOUT GENDER SHELL SERIES TERMINATION LOCKING MECHANISM GROUNDING LINK OPTIONS AC 3 F A H V Blank L Blank Series Prefix 3 Contacts only Female Socket Contacts A Type Horizontal Printed Circuit Board Vertical Printed Circuit Board Latching Latchless No Ground Link 1 Pin 1 to Chassis to mating connector shell 2 Mating connector shell to Chassis - Pin 1 sep. Ground. 3 Pin 1 to Chassis 4 Mating Shell to Chassis & Pin 1 Seperate Ground / Machined Contacts 5 No Ground Link / Machined Contacts CONTACT PLATING PACKAGING AU AG B Silver Plated Contacts (Non-) ed 33

36 AC SERIES CHASSIS CONNECTORS STANDARD DATA STANDARD DATA AC SERIES A TYPE CHASSIS VALUE GENERAL CHARACTERISTICS Number of contacts Contact Arrangements (Front view of pin insert) 3 ELECTRICAL CHARACTERISTICS CLIMATIC CHARACTERISTICS MECHANICAL CHARACTERISTICS MATERIALS Termination Flammability rating of plastics Service Voltage RMS Test Voltage AC RMS Current carrying capacity Typical Contact Resistance Insulation Resistance (initial) Insulation Resistance (after damp heat test) Protection Class Operating Temperature Weight 2) Retention Spring separating force Mounting Hole torque max. Mechanical Operations Fastening Connector Shell Shell Finish Insulators Male Contact Material Plating Female Contact Material Plating Latch lock and Spring Ground element Printed Circuit Board (PCB) UL94V-0 133V 1500V 6A 5mΩ 2GΩ 2GΩ IP40-30 C to +80 C 14g (0.030lb) 20N 1.5Nm 1500 mating cycles Self-Tapping PT screw with thread 2.9 x 1.06 and of Tri-rondular configuration PA % glass fibre reinforced, ULV94V-0 Black PA % glass fibre reinforced, ULV94V-0 Bronze µm (3µ ) gold over µm (30µ ) nickel Brass µm (3µ ) gold over µm (30µ ) nickel SUS (AISI - 301) - Nickel Plated Bronze - Nickel Plated 1) 34 1) 2) Not suitable for domestic applications above 50V Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.

37 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE AC SERIES A TYPE CHASSIS PCB FOOTPRINTS STRAIGHT (V) - CONNECTOR SIDE OF PCB AC3FAH AC3FAH2 AC3FAH1 AC3FAH3 AC3FAV AC3FAV2 AC3FAV1 AC3FAV3 AC3FAV4 AC3FAV5 AC3MAH AC3MAH2 AC3MAH1 AC3MAH3 AC3MAV AC3MAV2 AC3MAV1 AC3MAV3 35

38 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A TYPE FLANGE AC SERIES A TYPE CHASSIS PANEL CUTOUT DIMENSIONS - FRONT VIEW A TYPE A TYPE MALE MOUNTING PITCH A TYPE FEMALE MOUNTING PITCH 36

39 AC SERIES CHASSIS CONNECTORS AC SERIES XLR THERMOPLASTIC CHASSIS MOUNT CONNECTORS This receptacle is manufactured from glass filled UL94V-0 PBT Resin, and provides a lower cost alternative to the 'Z' series metal shell. Available in the small "D" or larger "P" housing or the dual versions featuring two connectors within a single housing. A positive latch lock system secures the mating cable connector. Manufactured to comply with IEC and AES standards. CSA File Number Features Thermoplastic Shell. The "D" size housing can be either front or rear mounted using the same panel cutout. The "P" size housing is the original front mounting XLR connector. Dual versions provide two connectors in the one shell. A leading first mate last break socket contact is standard on all female connectors (Pin 1). Solder cup or Insulation Displacement Contact (IDC) as well as Vertical or Horizontal PCB versions are available. Latching and Non-latching versions available. Available in 3 contact arrangements only. Compatible with all other XLR brands. Options Solder Bucket termination Insulation Displacement Contacts (IDC) contacts Horizontal PCB contacts Gold, Silver or Tin Plated Contacts aging Single Bag packs Cost effective stamped contacts Latching or Non-latching. Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. 37

40 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC D TYPE FLANGE Features: Thermoplastic shell. D type Flange. Solder Bucket connections. Vertical or Horizontal PCB mounting. Stamped contacts. Leading first mate last break socket contact. Positive latch lock system. Coloured housings available as specials. Options: Solder Buckets, Vertical or Horizontal PCB,, Latching or Non-latching,. Part Number Breakdown: Page 39 Specifications: Page 48 PCB Footprints: Page 49 Panel Cutouts: Page 49 NOTE: Refer to page 59, AC SERIES ACCESSORIES for mounting clips. PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, D Flange, Thermoplastic shell, Solder Buckets XLR 3 pole female, D Flange, Thermoplastic shell, Solder Buckets XLR 3 pole male, D Flange, Thermoplastic shell, Horizontal PCB mount XLR 3 pole female, D Flange, Thermoplastic shell, Horizontal PCB mount XLR 3 pole male, D Flange, Thermoplastic shell, mount XLR 3 pole female, D Flange, Thermoplastic shell, mount Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk AC3MDP AC3MDP BULK AC3MDPL AC3MDPL BULK AC3FDP AC3FDP BULK AC3FDPL AC3FDPL BULK AC3MDPH AC3MDPH BULK AC3MDPHL AC3MDPHL BULK AC3FDPH AC3FDPH BULK AC3FDPHL AC3FDPHL BULK AC3MDPV AC3MDPV BULK AC3MDPVL AC3MDPVL BULK AC3FDPV AC3FDPV BULK AC3FDPVL AC3FDPVL BULK 38

41 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC D TYPE FLANGE PART NUMBER BREAKDOWN THERMOPLASTIC D TYPE FLANGE SERIES PREFIX CONTACT LAYOUTS GENDER SHELL STYLE SHELL SERIES TERMINATION LOCKING MECHANISM CONTACT PLATING PACKAGING AC 3 M D P V L - AU BULK E. G. AC3MDPVL-AU BULK AC (Series Prefix),3 contacts, Male, D (Small Shell), P (Thermoplastic Chassis series) Vertical Printed Circuit Board, Latchless - AU (), aged. SERIES PREFIX CONTACT LAYOUT GENDER SHELL STYLE SHELL SERIES TERMINATION LOCKING MECHANISM CONTACT PLATING PACKAGING AC 3 F M D P Blank V H Blank L Blank AU Blank BULK Series Prefix 3 Contacts only Female Socket Contacts Male Pin Contacts Small Shell Thermoplastic Chassis Series Solder Buckets Vertical Printed Circuit Board Horizontal Printed Circuit Board Latching Latchless (Non-Latching) Plating ( Silver or Tin - Refer to Data.) Individual Bags ed 39

42 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC P TYPE FLANGE Features: Thermoplastic Shell. P Type Flange. Solder Bucket connections. Vertical or Horizontal PCB mounting. Stamped contacts. Leading first mate last break socket contact. Positive latch lock system. Coloured housings available as specials. Options: Solder Buckets, Vertical or Horizontal PCB,, Latching or Non-latching,. Part Number Breakdown: Page 41 Specifications: Page 48 PCB Footprints: Page 49 Panel Cutouts: Page 49 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, Wide Flange, Thermoplastic shell, Solder Buckets XLR 3 pole female, Wide Flange, Thermoplastic shell, Solder Buckets XLR 3 pole male, Wide Flange, Thermoplastic shell, Horizontal PCB mount XLR 3 pole female, Wide Flange, Thermoplastic shell, Horizontal PCB mount XLR 3 pole male, Wide Flange, Thermoplastic shell, mount XLR 3 pole female, Wide Flange, Thermoplastic shell, mount Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk Non-Latching Non-Latching Bulk AC3MPP AC3MPP BULK AC3MPPL AC3MPPL BULK AC3FPP AC3FPP BULK AC3FPPL AC3FPPL BULK AC3MPPH AC3MPPH BULK AC3MPPHL AC3MPPHL BULK AC3FPPH AC3FPPH BULK AC3FPPHL AC3FPPHL BULK AC3MPPV AC3MPPV BULK AC3MPPVL AC3MPPVL BULK AC3FPPV AC3FPPV BULK AC3FPPVL AC3FPPVL BULK 40

43 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC P TYPE FLANGE PART NUMBER BREAKDOWN THERMOPLASTIC P TYPE FLANGE SERIES PREFIX CONTACT LAYOUTS GENDER SHELL STYLE SHELL SERIES TERMINATION LOCKING MECHANISM CONTACT PLATING PACKAGING AC 3 M P P V L - AU BULK E. G. AC3MPPVL-AU BULK AC (Series Prefix),3 contacts, Male, P (Large Shell), P (Thermoplastic Chassis series) Vertical Printed Circuit Board, Latchless - AU (), aged. SERIES PREFIX CONTACT LAYOUT GENDER SHELL STYLE SHELL SERIES TERMINATION LOCKING MECHANISM CONTACT PLATING PACKAGING AC 3 F M P P Blank V H Blank L Blank AU Blank BULK Series Prefix 3 Contacts Only Female Socket Contacts Male Pin Contacts Large Shell with wide flange Thermoplastic Chassis Series Solder Buckets Vertical Printed Circuit Board Horizontal Printed Circuit Board Latching Latchless (Non-Latching) Plating ( Silver or Tin - Refer to Data.) Individual Bags ed 41

44 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC TYPE - IDC The Insulation Displacement Contact (IDC) connector is ideal for Original Equipment Manufacturers and end users alike and offers an alternative to our standard solder connector. Connectors can be can be quickly and easily assembled without screws or a soldering iron by hand. Labour savings of up to 60% in termination time can be achieved. Recommended Cable Specifications: Page 48 Features: Thermoplastic Shell. Optional "D", "P" or Dual Housing flange sizes. Insulation Displacement Contacts (IDC) Stamped contacts. Leading first mate last break socket contact. Positive latch lock system. Coloured housings available as specials. Options: Gold plated contacts,, Latching or Non-latching Part Number Breakdown: Page 44 Specifications: Page 48 Assembly Instructions: Page 50 Panel Cutouts: Page 49 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, D Flange, IDC contacts, Thermoplastic shell AC3MDPI AC3MDPI BULK Non-Latching AC3MDPIL Non-Latching Bulk AC3MDPIL BULK XLR 3 pole female, D Flange, IDC contacts, Thermoplastic shell AC3FDPI AC3FDPI BULK Non-Latching AC3FDPIL Non-Latching Bulk AC3FDPIL BULK XLR 3 pole male, Wide Flange, IDC contacts, Thermoplastic shell AC3MPPI AC3MPPI BULK Non-Latching AC3MPPIL Non-Latching Bulk AC3MPPIL BULK XLR 3 pole female, Wide Flange, IDC contacts, Thermoplastic shell AC3FPPI AC3FPPI BULK Non-Latching AC3FPPIL Non-Latching Bulk AC3FPPIL BULK 42

45 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC TYPE - IDC PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male + 3 pole male, Dual Flange, IDC contacts, Thermoplastic shell Latching Non-Latching AC3M3MPPI AC3M3MPPIL XLR 3 pole female + 3 pole male, Dual Flange, IDC contacts, Thermoplastic shell Latching Non-Latching AC3F3MPPI AC3F3MPPIL XLR 3 pole female + 3 pole female, Dual Flange, IDC contacts, Thermoplastic shell Latching Non-Latching AC3F3FPPI AC3F3FPPIL XLR 3 pole male + 3 pole female, Dual Flange, IDC contacts, Thermoplastic shell Latching Non-Latching AC3M3FPPI AC3M3FPPIL 43

46 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC TYPE - IDC PART NUMBER BREAKDOWN IDC D AND P THERMOPLASTIC CHASSIS TYPE E. G. AC3MDPIL-AU BULK AC (series prefix),3 contacts, Male, D Flange, Plastic Shell, IDC, Latchless, - AU (), aged. SERIES PREFIX CONTACT LAYOUT GENDER SHELL STYLE SHELL SERIES TERMINATION LOCKING MECHANISM CONTACT PLATING PACKAGING AC 3 F M D P P I Blank L Blank AU Blank BULK Series Prefix 3 Contacts only Female Socket Contacts Male Pin Contacts D Flange P Flange Thermoplastic Chassis Series IDC Termination Latching Latchless Plating ( Silver or Tin - Refer to Data.) Individual Bags ed PART NUMBER BREAKDOWN IDC DUAL THERMOPLASTIC CHASSIS TYPE E. G. AC3F3MPPIL-AU BULK AC (series prefix),3female, 3Male, PP (Dual Thermoplastic Chassis series), IDC, Latchless,- AU (), aged. SERIES PREFIX SERIES PREFIX CONTACT LAYOUTS GENDER SHELL STYLE SHELL SERIES TERMINATION LOCKING MECHANISM CONTACT LAYOUTS LEFT HAND SIDE* LOCKING MECHANISM CONTACT LAYOUTS RIGHT HAND SIDE* SHELL STYLE TERMINATION CONTACT PLATING CONTACT PLATING PACKAGING AC 3 M D P I L - AU BULK PACKAGING AC 3F 3M PP I L - AU BULK SERIES PREFIX CONTACT LAYOUT 3) LEFT HAND SIDE CONTACT LAYOUT RIGHT HAND SIDE AC 3F 3M 3F 3M SHELL STYLE PP TERMINATION LOCKING MECHANISM CONTACT PLATING PACKAGING 3) I Blank L Blank AU Blank BULK Series Prefix 3 Female Socket Contacts only 3 Male Pin Contacts only 3 Female Socket Contacts 3 Male Pin Contacts Dual Thermoplastic Chassis Series IDC Termination Latching Latchless Plating ( Silver or Tin - Refer to Data.) Individual Bags ed 3) Viewed from front of connector. 44

47 AC SERIES CHASSIS CONNECTORS DUAL HOUSING THERMOPLASTIC TYPE Features: Thermoplastic Shell. Dual Housing. Solder Bucket connections. Vertical or Horizontal PCB mounting. Stamped contacts. Leading first mate last break socket contact. Positive latch lock system. Coloured housings available as specials. Options: Solder Buckets or IDC, Vertical or Horizontal PCB,, Latching or Non-latching, Gold plated contacts. Part Number Breakdown: Page 47 Specifications: Page 48 PCB Footprints: Page 49 Panel Cutouts: Page 49 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male + 3 pole male, Dual Flange, Solder contacts Latching Non-Latching AC3M3MPP AC3M3MPPL XLR 3 pole male + 3 pole male, Dual Flange, Horizontal PCB mount Latching Non-Latching AC3M3MPPH AC3M3MPPHL XLR 3 pole male + 3 pole male, Dual Flange, mount Latching Non-Latching AC3M3MPPV AC3M3MPPVL XLR 3 pole female + 3 pole female, Dual Flange, Solder contacts Latching Non-Latching AC3F3FPP AC3F3FPPL XLR 3 pole female + 3 pole female, Dual Flange, Horizontal PCB mount Latching Non-Latching AC3F3FPPH AC3F3FPPHL 45

48 AC SERIES CHASSIS CONNECTORS DUAL HOUSING THERMOPLASTIC TYPE PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole female + 3 pole female, Dual Flange, mount Latching Non-Latching AC3F3FPPV AC3F3FPPVL XLR 3 pole male + 3 pole female, Dual Flange, Solder contacts Non-Latching AC3M3FPP AC3M3FPPL XLR 3 pole male + 3 pole female, Dual Flange, Horizontal PCB mount Non-Latching AC3M3FPPH AC3M3FPPHL XLR 3 pole male + 3 pole female, Dual Flange, mount Non-Latching AC3M3FPPV AC3M3FPPVL XLR 3 pole female + 3 pole male, Dual Flange, Solder contacts Non-Latching AC3F3MPP AC3F3MPPL XLR 3 pole female + 3 pole male, Dual Flange, Horizontal PCB mount Non-Latching AC3F3MPPH AC3F3MPPHL XLR 3 pole female + 3 pole male, Dual Flange, Mount Non-Latching AC3F3MPPV AC3F3MPPVL 46

49 AC SERIES CHASSIS CONNECTORS DUAL HOUSING THERMOPLASTIC TYPE PART NUMBER BREAKDOWN DUAL THERMOPLASTIC TYPE SERIES PREFIX CONTACT LAYOUT (LHS) AC 3M 3M PP CONTACT LAYOUT (RHS) SHELL STYLE LOCKING MECHANISM CONTACT PLATING PACKAGING L - AU BULK E. G. AC3M3MPPL-AU BULK AC (Series Prefix), 3Male(LHS), 3Male(RHS), PP Dual Thermoplasic Chassis Series, Latchless, - AU (), aged. SERIES PREFIX CONTACT LAYOUT 3) LEFT HAND SIDE CONTACT LAYOUT RIGHT HAND SIDE SHELL STYLE LOCKING MECHANISM CONTACT PLATING PACKAGING 3) AC 3F 3M 3F 3M PP Blank L Blank AU Blank BULK Series Prefix 3 Female Socket Contacts only 3 Male Pin Contacts only 3 Female Socket Contacts 3 Male Pin Contacts Dual Thermoplastic Chassis Series Latching Latchless Plating ( Silver or Tin - Refer to Data.) Individual Bags ed 3) Viewed from front of connector. 47

50 STANDARD DATA AC CHASSIS - THERMOPLASTIC VALUE AC SERIES CHASSIS CONNECTORS STANDARD DATA GENERAL CHARACTERISTICS Number of contacts AC Series Contact Arrangements (Front view of pin inserts) 3 ELECTRICAL CHARACTERISTICS CLIMATIC CHARACTERISTICS MECHANICAL CHARACTERISTICS MATERIALS IDC RECOMMENDED CABLE DIMENSIONS Termination Wire Gauge - Stranded wire: IDC Solder Printed Circuit Board (PCB) Flammability Service Voltage RMS Test Voltage AC RMS Current carrying capacity: IDC Solder Printed Circuit Board (PCB) Typicial Contact Resistance Insulation Resistance Protection Class Operating Temperature Weight 2) Mechanical Operations Connector Shell - Thermoplastic Shell Finish Insulators Male Contact Stamped IDC-Material/Plating Stamped Solder and PCB-Material/Plating Female Contact Stamped IDC-Material/Plating Stamped Solder and PCB-Material/Plating Solder / IDC / Printed Circuit Board (PCB) 24AWG 12AWG N/A UL94V-0 133V 1400V 1A 15A 15A 3mΩ 1000MΩ IP40-25 C to +75 C 14g - (0.030lb) 1000 mating cycles Thermoplastic, ULV94V-0 Modified PPE Resin Black, other colours available - contact factory ULV94V-0 PBT Resin or Modified PPE Resin Phosphor Bronze / Silver or Gold (optional) Phosphor Bronze / Silver or Gold (optional) Phosphor Bronze / Tin or Gold (optional) Phosphor Bronze / Tin or Gold (optional) 1) 48 1) 2) Not suitable for domestic applications above 50V Approximate weight in grams does not include packaging. Please contact us for exact weight for shipping purposes.

51 AC SERIES CHASSIS CONNECTORS THERMOPLASTIC SHELL TYPE AC SERIES RECEPTACLES THERMOPLASTIC MOUNTING INFORMATION D SERIES 90 PCB (H) PCB FOOTPRINT - CONNECTOR SIDE OF PCB D SERIES STRAIGHT PCB (V) AC3FDPH / AC3FPPH AC3MDPH / AC3MPPH P SERIES 90 PCB (H) AC3FDPV / AC3FPPV AC3MDPV / AC3MPPV PANEL CUTOUT DIMENSIONS - FRONT VIEW P SERIES STRAIGHT PCB (V) AC3FDP / AC3MDP AC3FPP / AC3MPP NOTE: For Dual Gang dimensions other than the mounting centres shown opposite please refer to the P Series above. AC DUAL GANG 49

52 AC SERIES CHASSIS CONNECTORS IDC ASSEMBLY INSTRUCTIONS AC IDC SERIES CHASSIS ASSEMBLY INSTRUCTIONS 1 Lay the insulated conductors between the wire holding fingers. The fingers will retain the wire if it is inserted sufficiently. 2 Break the strap off from the wire holder and the cap. Assemble the cap to the wire hoder as shown. Push it home until the second snap operates. 3 Align the wire holder and cap assembly with the slots down the side of the connector body. Push together, being careful not to damage the IDC blades through misalignment. 4 Ensure wire holder snaps into the body. 50

53 AC SERIES CONNECTORS PDN TYPE This range has been specially designed for amplifier to loudspeaker connections. The polarity configuration being POSITIVE, DRAIN, NEGATIVE. Visual color coding insert with matching boot/backshell (blue or white) can be used for either channel selection and/or cable identification purposes. AC-PDN 11 & 31 are recommended for live source applications (amplifiers). AC-PDN 12 & 34 are recommended for load applications (speakers). Features: Solder Bucket connections. Thermoplastic Shells Designed for 25 Amps RMS usage. "Jaws" Cable Retention System, Max. Cable O.D. 8mm (0.351 ) Precision machined contacts accept up to 4mm 2 (12AWG) conductors. Quick and easy assembly by hand or portable termination tool (Part Number T2860.) Options: White or Blue housing and insert colour. Std. Jaws cable clamp. Specifications: Page 52 Panel Cutouts: Page 26 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER PDN male, Cable connector, Positive, Negative, Drain contacts, Thermoplastic shell, Large Jaws cable clamp Blue housing White housing AC-PDN-12-BLU AC-PDN-12-WHT PDN female, Cable connector, Positive, Negative, Drain contacts, Thermoplastic shell, Large Jaws cable clamp Blue housing White housing AC-PDN-11-BLU AC-PDN-11-WHT PDN male, Chassis mount, Positive, Negative, Drain contacts, Thermoplastic shell Blue housing AC-PDN-34-BLU White housing AC-PDN-34-WHT PDN female, Chassis mount, Positive, Negative, Drain contacts, Thermoplastic shell Blue housing AC-PDN-31-BLU White housing AC-PDN-31-WHT 51

54 AC SERIES CONNECTORS PDN TYPE STANDARD DATA AC-PDN CONNECTORS VALUE GENERAL CHARACTERISTICS Number of contacts PDN Contact Arrangement (Front View of Socket & Pin Insert) Socket 2+Drain Pin Termination Solder Max. Wire Gauge - Stranded wire: Power 12AWG Drain 19AWG Flammability rating of plastics UL94V-0 ELECTRICAL CHARACTERISTICS Service Voltage RMS 133V 1) NOTE: Do not use this series of connectors for mains applications. The drain contact dimensions make it unsuitable for use as an earth contact. Test Voltage AC RMS 1400V Current carrying capacity: 7.5A CLIMATIC CHARACTERISTICS MECHANICAL CHARACTERISTICS MATERIALS Typicial Contact Resistance Insulation Resistance Protection Class Operating Temperature Insertion and Withdrawal Force Weight - Thermoplastic Typical Cable Retention Force Cable O.D. Range - JAWS Clamp Mechanical Operations Connector Shell Shell Colour Insulators Contact Machined Solder-(Material/Plating) 2) 3mΩ 1GΩ IP40-25 C to +75 C 10N - 30N 19g (0.041lb) 22Kg to 44Kg (50lb to 100lb) 6.5 mm to 8mm (0.255 to ) - 3 mm to 6.5 mm ( to ) - Optional - Contact us 1000 mating cycles Thermoplastic, UL94V-0 Modified PPE Resin Black UL94V-0 PBT Resin or Modified PPE Resin Brass / Silver or Gold (optional) 1) 2) Not suitable for domestic applications above 50V Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes. 52

55 EP / AP SERIES HIGH POWER CONNECTORS EP / AP SERIES HIGH POWER CONNECTORS The EP Series incorporates a rugged zinc diecast shell to give it maximum durability when used in demanding situations. The EP cable connector cable flex relief design minimises cable bend stress at point of entry into the connector housing. The AP Series Shell is manufactured from tough, durable thermoplastic, and ideal for fixed indoor installations. Both the EP and AP Series utilise the same contact and insulator components. Features High current contacts for distortion free signal. Tough, durable zinc diecast shell for the EP series. Cost effective durable thermoplastic shell for the AP series. EP series available in 3, 4, 5, 6 and 8 contact arrangements AP series available in 4, 5, 6, and 8 contact arrangements. Cable clamp capable of supporting cables from 9mm (0.35") to 16mm (0.63") in diameter. Quick release, vibration resistant latch lock. EP Cable Connectors are supplied with two different boots for different cable diameters. AP & EP Series are completely intermatable. Options Solder Bucket termination Nickel Plated Zinc Alloy shell Black finished Zinc Alloy shell Precision machined contacts Thermoplastic shell Ordering Codes We have listed the more common ordering codes in each section. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. 53

56 EP SERIES HIGH POWER CONNECTORS METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features: Solder Bucket connections. Precision machined contacts. Diecast Metal Housings High current contacts Male and female cable and chassis connectors available. EP Cable Connectors are supplied with two different boots for different cable diameters. Options: Black Finish Shell. Specifications: Page Panel Cutouts: Page 58 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER EP Male cable connector, Metal Shell 3 pole nickel finish EP pole black finish EP-3-12B 4 pole nickel finish EP pole black finish EP-4-12B 5 pole nickel finish EP pole black finish EP-5-12B ISO ASSEMBLY OF EP MALE 6 pole nickel finish EP pole black finish EP-6-12B 8 pole nickel finish EP pole black finish EP-8-12B EP Female cable connector, Metal Shell 3 pole nickel finish EP-3-11P 3 pole black finish EP-3-11PB 4 pole nickel finish EP-4-11P 4 pole black finish EP-4-11PB 5 pole nickel finish EP-5-11P 5 pole black finish EP-5-11PB ISO ASSEMBLY OF EP FEMALE 6 pole nickel finish EP-6-11P 6 pole black finish EP-6-11PB 8 pole nickel finish EP-8-11P 8 pole black finish EP-8-11PB 54

57 EP SERIES HIGH POWER CONNECTORS METAL TYPE - SOLDER PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER EP Male chassis mount, Round Flange, Metal Shell 3 pole nickel finish EP pole black finish EP-3-14B 4 pole nickel finish EP pole black finish EP-4-14B 5 pole nickel finish EP pole black finish EP-5-14B 6 pole nickel finish EP pole black finish EP-6-14B 8 pole nickel finish EP pole black finish EP-8-14B EP Female chassis mount, Round Flange, Metal Shell 3 pole nickel finish EP-3-13P 3 pole black finish EP-3-13PB 4 pole nickel finish EP-4-13P 4 pole black finish EP-4-13PB 5 pole nickel finish EP-5-13P 5 pole black finish EP-5-13PB 6 pole nickel finish EP-6-13P 6 pole black finish EP-6-13PB 8 pole nickel finish EP-8-13PT 8 pole black finish EP-8-13PBT EP Female chassis mount, Round Flange, Stamped contacts, Metal Shell 8 pole nickel finish EP-8-13P 8 pole black finish EP-8-13PB 55

58 AP SERIES HIGH POWER CONNECTORS THERMOPLASTIC TYPE - SOLDER The AP Series provides the same power handling performance as the EP Series in a cost effective, yet durable Thermoplastic housing. Features: Solder Bucket connections. Precision machined contacts. Thermoplastic Housings High current contacts Male & Female Cable and Chassis connectors available. Specifications: Page Panel Cutouts: Page 58 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER AP Male cable connector, Thermoplastic Black shell. 4 pole AP pole AP pole AP pole AP-8-12 AP Female cable connector, Thermoplastic Black shell. 4 pole AP pole AP pole AP pole AP-8-11 AP Male chassis mount, Round Flange, Thermoplastic Black shell. AP Female chassis mount, Round Flange, Thermoplastic Black shell. AP Male chassis mount, Rectangular Flange, Thermoplastic Black shell. AP Female chassis mount, Rectangular Flange, Thermoplastic Black shell. 4 pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP pole AP

59 EP / AP SERIES HIGH POWER CONNECTORS STANDARD DATA STANDARD DATA EP/AP GENERAL CHARACTERISTICS Number of contacts Contact Arrangements (Front view of pin insert) VALUE Termination SOLDER Wire Gauge - Stranded wire: 12AWG 12AWG 12AWG 12AWG 14AWG ELECTRICAL CHARACTERISTICS Flammability Service Voltage RMS Test Voltage AC RMS 1) UL94V-0 460V 660V 200V 200V 100V 2400V 3000V 1600V 1600V 1300V Current carrying capacity 20A 20A 20A 20A 15A CLIMATIC CHARACTERISTICS Typicial Contact Resistance Insulation Resistance Protection Class Operating Temperature 3mΩ 1000MΩ IP40-25 C to +75 C MECHANICAL CHARACTERISTICS 2) Weight - EP 11 & 12 80g 84g 86g 86g 86g (0.176lb) (0.185lb) (0.189lb) (0.189lb) (0.189lb) 2) Weight - EP 13 & 14 48g 50g 54g 54g 54g 2) (0.105lb) (0.110lb) (0.119lb) (0.119lb) (0.119lb) Weight - AP 11 & 12 N/A 42g 44g 44g 44g 2) (0.092lb) (0.097lb) (0.097lb) (0.097lb) Weight - AP 13, 14, 21 & 22 N/A 26g 30g 30g 28g (0.057lb) (0.066lb) (0.066lb) (0.061lb) Typical Cable retention force Mechanical operations 22Kg to 44Kg (50lb to 100lb) - Dependant on cable material and diameter 1000 mating cycles 1) 2) Not suitable for domestic applications above 50V Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes. 57

60 EP / AP SERIES HIGH POWER CONNECTORS STANDARD DATA STANDARD DATA EP/AP (CONT D) DETAILS MATERIALS TYPE AP EP Connector shell Shell finish Modified PPE Resin Black Diecast Zinc Alloy Satin Nickel or Black Insulators Cable Bushing Male contact Machined - Solder Material / Plating Female contact Machined - Solder Material / Plating Silicon Rubber UL94V-0 PBT Resin UL94 HB Thermoplastic Elastomer Brass / Bright Tin Brass / Bright Tin CLAMPING CHARACTERISTICS Cable OD Range 11mm to 17mm 9mm to 16mm (0.43 to 0.67 ) (0.35 to 0.63 ) Retention Method Two opposing plastic screws Metal saddle clamp EP/AP SERIES PANEL CUTOUT DATA - FRONT VIEW EP 13/AP 13/AP 21 EP 14/AP 14/AP 22 58

61 AC SERIES ACCESSORIES Amphenol have developed a range of accessories to complement the AC Series connectors including: Colour coded boots(backshells) and rings to assist in cable identification. In-line adaptors. Pre-wired for convenience. Termination tool for fast assembly of cable connectors. Chassis mounting clip for installation with, or without screws. Metal boots(backshells) for rugged environments. PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male to 3 pole male adapter, Pre wired, Metal Shell Nickel Finish Black Finish AC3M3MW AC3M3MBW XLR 3 pole female to 3 pole female adapter, Pre wired, Metal Shell Nickel Finish Black Finish AC3F3FW AC3F3FBW XLR 3 pole female to 3 pole male adapter, Pre wired, Metal Shell Nickel Finish Black Finish AC3F3MW AC3F3MBW Termination Tool For IDC and Solder cable connectors T2860 Mounting Clip used for mounting AC series chassis receptacle with or without screws or pop rivets Single style clip, 2.4mm holes for M3 self tapping screw. Single style clip, 3.35mm holes Dual style clip, 3.35mm holes

62 AC SERIES ACCESSORIES PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER AC Coloured Boot / Backshell Brown Red AC-NUT-BRN AC-NUT-RED Orange AC-NUT-ORG Yellow AC-NUT-YEL Green AC-NUT-GRN Blue AC-NUT-BLU Violet AC-NUT-VIO Note: Number Identification optional. (Please contact us.) Grey White AC-NUT-GRY AC-NUT-WHT AC Metal Boot / Backshell, Black Finish Not Applicable AC-NUT-METAL AC Coloured Identification Rings Brown Red AC-RING-BRN AC-RING-RED Orange AC-RING-ORG Yellow AC-RING-YEL Green AC-RING-GRN Blue AC-RING-BLU Violet AC-RING-VIO Note: Number Identification optional. (Please contact us.) Grey White AC-RING-GRY AC-RING-WHT Not Applicable Connector display case Includes: AC Series AP Series EP Series AC - BNC Accessories CAT-AUDIO-CASE 60

63 BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can be used in a variety of applications where true 75 ohm performance is needed to insure lower signal distortion. Designed for most popular 75 ohm cables used in broadcast and CATV applications as well as for plenum cables, these connectors feature crimp-crimp cable attachment for quick and reliable installation. We also offer solder and printed circuit board types. Two distinct types of 75 ohm BNCs are available. Both types mate with each other and with 50 ohm BNC connectors. Type 1 is designated 75 ohm BNC-T1 and provides constant 75 ohm performance with low VSWR DC to 4 GHz. Type 2 is designated 75 ohm BNC-T2 and is usable with low reflection DC to 1 GHz. For applications above 1 GHz, Type 1 is recommended. Applications Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal Ordering Codes We have listed the more common ordering codes in each section. Amphenol offer an extensive range of RF connectors for most applications. Please visit for further information. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. Broadcast High bandwidth video equipment D1/D2 serial digital Graphic work stations Telephony / Workstations Options Crimp Plugs Crimp Jacks Crimp Bulkhead Jacks Plug to Plug adapters 61

64 BNC 75Ω CONNECTORS Amphenol manufacture a large range of connectors to suit cables other than those listed below, for example Belden YR23769 and 46899, please contact us to discuss your specific requirements. Assembly Instructions Page Specifications: Page Panel Cutouts: Page 70 NOTES CAI Cable Assembly Instructions PLT Plating Code (Refer Specifications) INS. Cable Insulator Material (Refer Specifications) PRODUCT - FIGURE DRAWING DESCRIPTION & NOTES 75Ω Dimensions in mm (inches) PART NUMBER CABLE TYPE RG-/U CAI Crimp Plug C31 P15 D1 T PLT. INS. TYPE RG-6 Type.295 O.D. max. Belden 9248, 1694A (Single Shield) C32 P7 D26 T RFX Crimp Plug 59, 62 Belden 8241, 8263, 8279, 9209 C31 P16 D1 T1 C32 P7 D26 T RFX Crimp Plug 59 Type (20AWG CC) Belden 1426A, 1505A, 9100, 9278 C31 P15 D1 T1 C32 P7 D26 T RFX Crimp Plug 59 Type centre conductor, Belden 1505A, 1426A, 9659, 9259, 9240, 8212, 9274, 9275, 9100 C31 P15 D1 T Crimp Plug Miniature Coax, 179, 187 C31 P15 D1 T1 C32 P17 D26 T RFX Crimp Plug Double Shield 59 (20 AWG CC) C31 P15 D1 T

65 BNC 75Ω CONNECTORS PRODUCT - FIGURE DRAWING DESCRIPTION & NOTES 75Ω Dimensions in mm (inches) PART NUMBER CABLE TYPE RG-/U CAI TYPE Crimp Jack C31 P17 D1 T , Belden 8241, 8263 PLT. INS. Crimp Jack 179, 187 C32 P7 D23 T RFX Crimp Bulkhead Jack 179, 187 Crimp Bulkhead Jack 59, Belden 8241, 8263 Solder Receptacle Front Mount C31 P17 D1 T1 C32 P15 D1 T2 - P7 D23 T RFX Solder Receptacle - Isolated With Ground Tab - P7 D12 T RFXG2 Adapter Plug to Plug - Straight - P15 D1 T RFX Adapter Jack to Jack - Straight - P17 D1 T1 - P15 D1 T Bulkhead Adapter -Isolated Jack to Jack - Straight Bayonet Lock to Bayonet Lock - P7 D1 T1 AC-BNC-JJA-75 Bulkhead Adapter -Isolated Jack to Jack - Straight Push on to Bayonet Lock - P7 D1 T1 AC-BNC-PJA-75 63

66 BNC 75Ω CONNECTORS PRODUCT - FIGURE DRAWING DESCRIPTION & NOTES 75Ω Dimensions in mm (inches) PART NUMBER CABLE TYPE RG-/U Bulkhead Adapter -Isolated, D Metal Shell Housing Jack to Jack,Bayonet Lock to Bayonet Lock, Nickel Finish Bulkhead Adapter -Isolated, D Metal Shell Housing Jack to Jack,Bayonet Lock to Bayonet Lock, Black Finish Bulkhead Adapter -Isolated, D Metal Shell Housing Jack to Jack, Push on to Bayonet Lock, Nickel Finish Bulkhead Adapter -Isolated, D Metal Shell Housing Jack to Jack,Push on to Bayonet Lock, Black Finish CAI PLT. INS. TYPE - P7 D1 T2 - P7 D1 T2 - P7 D1 T2 - P7 D1 T2 AC - BNC - JJ - 75 AC - BNC - JJ - 75B AC - BNC - PJ - 75 AC - BNC - PJ - 75B U - Link Centre to Centre mm Note: Custom Sizes available please contact us. - P7 D1 T2 BNC - U-LINK 75*1 NOTE: Solder versions and 50Ω versions available contact us. BNC 75Ω RF CONNECTORS FOR PRINTED CIRCUIT BOARD PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER Right Angle PCB mount jack, White plastic body Profile Dimension mm RFX Right Angle PCB mount jack, Metal body Profile Dimension mm RFX PCB FOOTPRINT - CONNECTOR SIDE OF PCB RFX RFX 64

67 BNC 75Ω CONNECTORS BNC 75Ω ACCESSORIES AND TOOLING PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION CABLE TYPE COLOUR PART NUMBER Strain - Relief boots 58 Black Blue Green Red Yellow Orange Grey Strain - Relief boots 59 Black Blue Green Red Yellow Orange Grey Strain - Relief boots 174 Black NOTE: To be used with.128,.151 and.178 hex crimp ferrule only. Blue Red Orange Green Yellow Grey N/A Crimp tool with Die Set 55/ 58/ 59/ 62/ Not Applicable / 142/ 223/ 303/ 400 6/ 174/ 188/ 316/ 179/ 187 Not Applicable / 62/ 174/ 188/ 316/ 179/ 187 6/ 59 Not Applicable Not Applicable

68 BNC 75Ω CONNECTORS ASSEMBLY INSTRUCTIONS - C31 CRIMP TERMINATION FOR TYPE 1-75Ω CONNECTORS outer ferrule contact body assembly AMPHENOL PART No. TYPE CABLE RG-/U Plug CAVITY FOR CONTACT 6, Belden 9248, Plenum 6 1.3(0.52 )sq. HEX CRIMP DATA CAVITY FOR OUTER FERRULE 8.2 (.324 ) CRIMP TOOL STRIPPING DIMENSIONS, mm (inches) A B C 14.7 (.577 ) 5.9 (.234 ) 3.6 (.140 ) Plug (0.52 )sq. 6.5 (.225 ) (.577 ) 5.9 (.234 ) 3.6 (.140 ) Plug 59 (20AWG CC) 1.3(0.52 )sq. 6.5 (.225 ) (.577 ) 5.9 (.234 ) 3.6 (.140 ) Plug (.032 CC) 1.3(0.52 )sq. 6.5 (.225 ) (.577 ) 5.9 (.234 ) 3.6 (.140 ) Jack (0.52 )sq. 6.5 (.225 ) (.557 ) 5.4 (.214 ) 4.0 (.156 ) Plug 179, (0.52 )sq. 4.5 (.178 ) (.577 ) 5.9 (.234 ) 3.6 (.140 ) Jack 179, (0.52 )sq. 4.5 (.178 ) (.886 ) 11.4 (.451 ) 3.6 (.140 ) Plug DB Shield (0.52 )sq. 8.2 (.324 ) (.577 ) 5.9 (.234 ) 3.6 (.140 ) 1 Slide outer ferrule over cables shown. Flare slightly end of cable braid as shown to facilitate insertion of inner ferrule. IMPORTANT: DO NOT COMB OUT BRAID. For RG-174, 179, 187, 188, 316/U cables only, slit jacket back 2.5mm (.100 ) as shown. Before attaching centre contact, slide TFE sleeve (not shown) over cable dielectric and under braid. The centre contact should butt against the dielectric and TFE sleeve. 2 Place contact onto centre conductor so it butts against cable dielectric. Crimp contact in place. 3 Install cable assembly into body assembly so inner ferrule slides over sleeve and under braid. Push cable assembly forward until contact seats in insulator. Slide outer ferrule over braid and up against connector body. Crimp outer ferrule. 66

69 BNC 75Ω CONNECTORS ASSEMBLY INSTRUCTIONS - C32 CRIMP TERMINATION FOR TYPE 2-75Ω CONNECTORS outer ferrule bushing male contact plug body assembly female contact jack body assembly for use on RG-62 AMPHENOL PART No. TYPE CABLE RG-/U RFX Plug 6 CAVITY FOR CONTACT 1.7 (.068 ) HEX CRIMP DATA CAVITY FOR OUTER FERRULE 8.2 (.324 ) CRIMP TOOL STRIPPING DIMENSIONS, mm (inches) A B C 15.1 (.593 ) 6.4 (.250 ) 4.0 (.156 ) RFX Plug 59, (.068 ) 6.5 (.255 ) (.630 ) 7.7 (.303 ) 4.0 (.156 ) RFX Plug 59 (20AWG CC) 1.7 (.068 ) 6.5 (.255 ) (.630 ) RFX Plug 179, (.068 ) 4.5 (.178 ) (.590 ) RFX Jack 179, (.068 ) 4.5 (.178 ) (.571 ) 7.7 (.303 ) 8.2 (.323 ) 7.7 (.303 ) 4.0 (.156 ) 3.0 (.118 ) 4.0 (.156 ) Jack 59, (.068 ) 6.5 (.255 ) (.593 ) 6.4 (.250 ) 4.0 (.156 ) 1 Strip cable jacket, braid, and dielectric to dimensions in table above. [for RG-62, cable, trim an additional 1.0mm (.039 ) of insulation off centre conductor and add bushing] All cuts are to be sharp and square. IMPORTANT: DO NOT NICK BRAID, DIELECTRIC AND CENTRE CONDUCTOR. Slide outer ferrule onto cable as shown. For RG-174, 179, 187, 188, 316/U cables only, slit jacket back 2.5mm(.100 ) as shown. Before attaching centre contact, slide TFE sleeve (not shown) over cable dielectric and under braid. The centre contact should butt against the dielectric and TFE sleeve. 2 Flare slightly end of cable braid as shown to facilitate insertion of inner ferrule. IMPORTANT: DO NOT COMB OUT BRAID. Place contact on cable centre conductor so that it butts against cable dielectric. Crimp contact in place using Crimp Tool indicated in table above. When using RG-62, install bushing over centre conductor before installing contact. 3 Install cable assembly into body assembly so that inner ferrule portion slides under braid. Push cable assembly forward until contact snaps into place in insulator. Slide outer ferrule over braid and up against connector body. Crimp outer ferrule using Crimp Tool specified in table above. 67

70 BNC 75Ω RF CONNECTORS STANDARD DATA STANDARD DATA BNC 75Ω RF CONNECTORS VALUE GENERAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Mating Cable Attachment Impedance Frequency Range Voltage Rating Dielectric withstanding voltage VSWR Type 1 Type 2 Insulation Resisance Bayonet Lock Crimp - Crimp / Solder 75Ω 0-4 GHz 300V RMS 1500 Volts RMS f(ghz) DC to 4 GHz f(ghz) DC to 1 GHz 500 MΩ min. MATERIALS Part Material Finish Body, Coupling sleeves Crimp Ferrule Male Contact Female Contact XLR Housing Brass Copper Alloy Brass Beryllium Copper or Phosphor Bronze Diecast Zinc Alloy Nickel Nickel Gold Gold Satin Nickel or Black Polyester INSULATOR / DIELECTRIC CODES D1 Code Material Finish TFE or equiv. Per MIL-P-19468A Natural D12 D23 D26 Noryl GFN2 20% Glass filled Delrin TPX Natural Natural Natural PLATING CODES Code Body Contact P7 P15 P16 P17 Nickel Nickel Gold over Nickel Nickel Gold Gold over Nickel Gold over Nickel Gold over Copper 68

71 BNC 75Ω RF CONNECTORS STANDARD DATA VALUE ENVIRONMENTAL Shock Mil-Std. 202 method 202 Vibration Mil-Std. 202 method 204 (test cond. D) Moisture Resistance Mil-Std. 202 method 106 Corrosion Mil-Std. 202 method 101 (test cond. B) Temperature Cycling Mil-Std. 202 method 102 (test cond. D) NOTE: These characteristics are typical and may not apply to all connectors. 69

72 PANEL CUTOUTS - FRONT VIEW RFXG2 AC-BNC-PJ-75 AC-BNC-JJ-75 AC-BNC-PJA-75 AC-BNC-JJA RFX RFX 70

73 AUDIO CONNECTORS 1/4 PHONO PLUGS AND SOCKETS A new range of 1/4" Phono, RCA and Banana plugs have been added to our current extensive range of XLR connectors enabling Amphenol to broaden its product offering to the entertainment industry. This range will be developed further in the future, to provide even more benefits to the manufacturer and end user alike. Applications Audio Cables and Snakes Amplifiers Speakers Mixing desks Rack equipment Features / Options - 1/4" Phono Plug Mono or Stereo Compact Shell Straight or Right angle Gold or Nickel tip Gold, Nickel or Black finish Machined or Diecast shell Features / Options - 1/4" Phono Jack Mono or Stereo Vertical or Horizontal PCB mount Solder contacts Combo contacts Metal nut Plastic nut Features / Options RCA Plug Female or Male Red or Black strip for channel I.D. Gold plated finish Gold plated contacts Ordering Codes We have listed the more common ordering codes in each section. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. Features / Options Banana Plug Red or Black for channel I.D. Gold or Nickel plated contacts 71

74 AUDIO CONNECTORS 1/4 (6.35mm) PHONO PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION TYPE PART NUMBER 1/4" (6.35mmø) Phono plug, Machined compact shell, Nickel finish. Mono Stereo ACPM - CN ACPS - CN 1/4" (6.35mmø) Phono plug, Machined compact shell, Gold finish. Mono Stereo ACPM - CG - AU ACPS - CG - AU 1/4" (6.35mmø) Phono plug, Machined shell, Nickel finish. Mono Stereo ACPM - MN ACPS - MN 1/4" (6.35mmø) Phono plug, Diecast shell, Nickel finish, Gold plated tip. Mono Stereo ACPM- ZN- AU ACPS- ZN - AU 1/4" (6.35mmø) Phono plug, Machined shell, Black finish. Gold plated tip and sleeve. Mono Stereo ACPM - MB- AU ACPS - MB- AU 1/4" (6.35mmø) Phono plug, Right Angle, Machined shell, Nickel finish. Mono Stereo ACPM - MRN ACPS - MRN 1/4" (6.35mmø) Jack, Horizontal PCB mount, Plastic housing with metal insert Mono - Plastic Nut Mono - Metal Nut ACJM - PH ACJM - MH 1/4" (6.35mmø) Jack, Horizontal PCB mount, Plastic housing with metal insert Stereo - Plastic Nut Stereo - Metal Nut ACJS - PH ACJS - MH 72

75 AUDIO CONNECTORS 1/4 (6.35mm) PHONO PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION TYPE PART NUMBER 1/4" (6.35mmø) Jack, Combination Horizontal PCB and Solder lug, Plastic housing Mono Plastic nut Mono Metal nut ACJM - PC ACJM - MC 1/4" (6.35mmø) Jack, Combination Horizontal PCB and Solder lug, Plastic housing Stereo Plastic nut Stereo Metal nut ACJS - PC ACJS - MC 1/4" (6.35mmø) Jack, mount, Metal nut and insert Mono ACJM-MV 1/4" (6.35mmø) Jack, mount, Metal nut and insert Stereo ACJS-MV 1/4" (6.35mmø) Jack, Solder lugs, Metal nut and insert Mono ACJM-MS 1/4" (6.35mmø) Jack, Solder lugs, Metal nut and insert Stereo ACJS-MS 73

76 AUDIO CONNECTORS 1/4 (6.35mm) PHONO PANEL CUTOUTS -FRONT VIEW PCB FOOTPRINT - CONNECTOR SIDE OF PCB ACJM-MV ACJS-MV ACJM-MS ACJS-MS ACJM-MV ACJS-MV ACJM-PH ACJM-MH ACJS-PH ACJS-MH ACJM-PC ACJM-MC ACJS-PC ACJS-MC ACJM-PH ACJM-MH ACJS-PH ACJS-MH ACJM-PC ACJM-MC ACJS-PC ACJS-MC 74

77 AUDIO CONNECTORS RCA & BANANA PLUGS PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION TYPE PART NUMBER RCA Male plug, Gold finish Red AC-RCAMR-AU Max cable O.D 6mm (0.236") RCA Male plug, Gold finish Black AC-RCAMB-AU Max cable O.D 6mm (0.236") RCA Female plug, Gold finish Red AC-RCAFR-AU Max cable O.D 6mm (0.236") RCA Female plug, Gold finish Black AC-RCAFB-AU Max cable O.D 6mm (0.236") Banana Plug Dual, Plastic housing, Nickel plated contacts Red AC-BPD-R Max cable O.D 5mm (0.196") Banana Plug Dual, Plastic housing, Nickel plated contacts Black AC-BPD-B Max cable O.D 5mm (0.196") Banana Plug Dual, Plastic housing, Gold plated contacts Red AC-BPD-R-AU Max cable O.D 5mm (0.196") Banana Plug Dual, Plastic housing, Gold plated contacts Black AC-BPD-B-AU Max cable O.D 5mm (0.196") 75

78 Socapex S61 CONNECTORS SL61 Socapex connectors feature closed entry socket contacts that prevent any misalignment. Contacts are machined from copper alloy and fitted with a beryllium spring ensuring a reliable contact between pin and socket. Gold plated contacts are standard. Soft Neoprene inserts with solder contact withstands forceful impact of the connectors. SLG 419AR "SHOW-BIZ" Socapex connectors, derived from the SL series, have been developed to meet the new safety requirements of the entertainment markets. The connector provides 19 solder termination contacts of which 7 are "first mate last break" sockets. C146 SERIES RECTANGULAR CONNECTORS Amphenol Tuchel C146 series rectangular connectors feature modular components ensuring a vast range of different features and benefits for the end user. The zinc diecast aluminum housings are finished in a durable powder coat and available in either top or side entry. Connector coupling is achieved via a positive locking lever ensuring a positive rapid connection. The C146 series is suitable for general-purpose audio and lighting applications and is completely intermateable with all competitor connectors. CIRCULAR CONNECTORS Amphenol earned its spurs in the military and aerospace sector, where components have to meet the highest standards or performance and reliability. Our interconnect products are used in major space programs, military and commercial aircraft and numerous other sophisticated systems, including radar and battlefield communications. They are designed to withstand extreme temperatures, moisture, vibration and other demanding environmental conditions. Amphenol manufacture the broadest range of interconnection solutions for Military, Commercial and Industrial applications. Brand names owned by Amphenol include Matrix Pyle National and Sine. FIBRE OPTIC Amphenol has over 20 years experience in fibre optics dating back to their development of the first industry standard connector, the SMA. Amphenol s range has since broadened to include popular connector types, cable assemblies, couplers, wave division multiplexers, attenuators and adapters. Amphenol s experience also lead to the development of a large range of ruggedised connectors for harsh environment applications. Please visit for further information. 76