CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
|
|
|
- Shana Marshall
- 5 years ago
- Views:
Transcription
1 CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7
2 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION TERMINAL STYLE ACCEPTABLE WIRE NO. OF CONTACTS SERIES PAGE 6 SERIES Dual-Inline Transition Connector I.D.C / DIP Solder,,, 24,,,,, 6 K-9 #28 AWG 6 SERIES With Strain Receptacle I.D.C Relef 6 K- Plug With Long Latch DIP Solder 61 K-11 6S SERIES MIL Standard Without Strain Receptacle I.D.C #28 AWG 6S K-12 Relef,,,,,,, With Short Plug DIP Solder 61S K-13 Latch 62 SERIES Receptacle With Pull Tab I.D.C #28 AWG 62 K- Plug Box Type DIP Solder 6231 K-15 K-8
3 6 SERIES FEATURES Flat ribbon cable transition connector 2.54mm contact center dual inline terminals RoHS compliance SPECIFICATIONS ORDER CODE Insulator : Glass-filled PBT(UL94V-0),Black Contact : Copper alloy Contact plating : IDC area ; Gold over Nickel Terminal area ; Gold over Nickel Recommended cable : #28 AWG(7/0.127) Current rating : 1A per contact Contact resistance : m max. Dielectric withstanding voltage: 800V AC for 1minute Insulation resistance : 1,000M min. at 0V DC Operating temperature : -55 C to +85 C 6 2 F F : RoHS compliance Contact name 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 024 : 24pin 0 : pin 0 : pin F A Unit:mm(inch) (0.354) 1.27(0.05) (n-1) 2.54±0.05 (0.±0.002) 2.54(0.1) 0 B B±0.08(0.003) 2.54±0.05(0.±0.002) 0.8(0.567)MIN. 0.5(0.02) 0.5(0.02) 7(0.276) 2.54 (0.1) 3.5(0.138) contacts 24 End (4) contacts are kinked to hold connector to PC board during wave soldering. Product Table / Dimensions Part Number F F F F F F F F F F F C A B C (0.754) (0.0) (0.0) (0.954) (0.0) (1.054) (0.800) (1.254) (0.0) (1.000) (1.454) (1.) (1.) (1.554) (1.) (1.0) (1.754) (1.0) (1.0) (1.954) (1.0) (1.700) (2.254) (1.0) (2.000) (2.754) (2.0) (2.0) (3.254) (2.0) (3.000) K-9
4 6 SERIES 6 1 F Contact name Cable side connector (Receptacle) PCB side connector (Plug) F 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin F : RoHS compliance 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin F : RoHS compliance Contacts name : 256 : Straight 258 : Right angle Receptacle F Unit : mm (inch) (0.551) 0.38(0.015) 5.6 (0.) 7 (0.276) 3.3 (0.) 15.9 (0.6) 6 (0.236) KEY (0.224) 1.5(0.059) 0.8(0.032) 3.6(0.2) 3.81(0.) 2.54(0.) pitch B±0.2(B±0.008) 1.27(0.0) (n-1) 1.27(0.0) pitch C 1.27 (0.0) Product Table / Dimentions contacts Part Number A B C F (0.680). (0.0) (0.0) F (0.880) (0.0) F (0.980).32 (0.800) F (1.180) (0.0) 25. (1.000) F (1.480) (1.) (1.0) F (1.680) (1.0) 38. (1.0) F (1.880).64 (1.0) (1.700) F (2.180) (1.0).80 (2.000) F (2.680).96 (2.0) 63. (2.0) F (3.180) (2.0) 76. (3.000) 2.54(0.) K-
5 6 SERIES F (Straight) / F (Right angle) Plug (Straight) 2.54(0.) D - 0 (D- 0 ) E±0.2(E±0.008) 2.54(0.)pitch Unit : mm(inch) 8.6 (0.339) ( ) 3.81(0.) 1.27(0.0) 4.1(0.1) 2.54±0.08(0.±0.003) 1.52(0.0) E±0.08(0.003) 2.54±0.08(0.±0.003)pitch.55(0.573) 2.85(0.112) 5(0.197) ( 0.025) 17.5(0.689).8(1.055) 0.5 (0.0) 2.8(0.1) 0.5( 0.0) 0.8(0.031)MIN. 3.2( 0.1) Plug (Right angle) 1.52 (0.0) 2.54(0.) 8.6 (0.339) ( ) D - 0 (D- 0 ) E±0.2(E±0.008) 2.54(0.)pitch 3.81(0.) 1.27(0.0).55 (0.573) 2.85 (0.112) (0.197) 4.1(0.1) 0.64( 0.025) 17.5(0.689).8(1.055) 0.5 (0.0) 0.5( 0.0) 2.8(0.1) 0.74(0.029) 2.54(0.) 2.54±0.08(0.±0.003) 0.74(0.029) 4(0.157) KEY- 8.5(0.335) 6.25(0.246) 3.1(0.122) 6 (0.236) E±0.08(E±0.003) 2.54±0.08(0.±0.003)pitch 0.8( 0.031) 2.7( 0.6) Product Table / Dimensions contacts Part Number A B C D E F F (1.2) (1.) (0.8) (0.6) (0.0) F F (1.4) (1.0) (1.0) (0.8) (0.0) F F (1.5) (1.0) (1.) (0.9) F F (1.7) (1.0) (1.3) (1.1) (0.0) F F (2.059) (1.0) (1.6) (1.4) (1.) F F (2.2) (2.) (1.8) (1.6) (1.0) F F (2.4) (2.0) (2.0) (1.8) (1.0) F F (2.7) (2.0) (2.3) (2.1) (1.0) F F (3.2) (3.) (2.8) (2.6) (2.0) F F (3.7) (3.0) (3.3) (3.1) (2.0) K-11
6 6 SERIES 6S- -1-F Receptacle Unit : mm (inch) (0.236) 3.3 (0.) KEY (0.224) 1.5( 0.059) 0.8( 0.031) 3.6(0.2) 3.81(0.) 2.54(0.)pitch B±0.2(B±0.008) 1.27(0.0) (n-1) 1.27(0.0) pitch C 7(0.276).3 (0.6) 1.27(0.0) Product Table / Dimentions contacts Part Number A B C 6S-0-1-F (0.680). (0.0) (0.0) 6S-0-1-F (0.880) (0.0) 6S-0-1-F (0.980).32 (0.800) 6S-0-1-F (1.180) (0.0) 25. (1.000) 6S-0-1-F (1.480) (1.) (1.0) 6S-0-1-F (1.680) (1.0) 38. (1.0) 6S-0-1-F (1.880).64 (1.0) (1.700) 6S-0-1-F (2.180) (1.0).80 (2.000) 6S-0-1-F (2.680).96 (2.0) 63. (2.0) 6S-0-1-F (3.180) (2.0) 76. (3.000) 2.54(0.) K-12
7 6S SERIES 61S F (Straight) / 61S F (Right angle) 2.54±0.08(0.±0.003) 1.52(0.0) Plug (Straight) E±0.08(E±0.003) 2.54±0.08(0.±0.003)pitch.47 (0.412) 2.85 (0.112) 2.54(0.) 1.52 (0.06) D - 0 (D- 0 ) E±0.2(E±0.008) 2.54(0.)pitch 3.81(0.) 1.27(0.0) (0.197) ( ) 17.5(0.689) 23.5(0.925) 0.5 (0.0) 8.6 (0.339) Unit : mm(inch) 2.8(0.1) 0.5( 0.0) 0.8( 0.031)MIN. 3.2( 0.1) Plug (Right angle) 2.54(0.) D - 0 (D- 0 ) E±0.2(E±0.008) 2.54(0.)pitch ( ) 8.6 (0.339).47 (0.412) 2.85 (0.112) 3.81(0.) 1.27(0.0) (0.1) 0.64( 0.025) 5(0.197) 17.5(0.689) 0.5 (0.0) 23.5(0.925) 2.8(0.1) 0.5( 0.0) 0.74(0.029) 2.54(0.) 2.54±0.08(0.±0.003) 0.74(0.029) KEY- 4(0.157) 8.5(0.335) 3.1(0.122) 6.25(0.246) E±0.08(E±0.003) 2.54±0.08(0.±0.003)pitch 0.8( 0.031) 2.7( 0.6) 6 (0.236) Product Table / Dimensions contacts Part Number A B C D E 61S F S F (1.2) (1.) (0.8) (0.6) (0.0) 61S F S F (1.4) (1.0) (1.0) (0.8) (0.0) 61S F S F (1.5) (1.0) (1.) (0.9) 61S F S F (1.7) (1.0) (1.3) (1.1) (0.0) 61S F S F (2.059) (1.0) (1.6) (1.4) (1.) 61S F S F (2.2) (2.) (1.8) (1.6) (1.0) 61S F S F (2.4) (2.0) (2.0) (1.8) (1.0) 61S F S F (2.7) (2.0) (2.3) (2.1) (1.0) 61S F S F (3.2) (3.) (2.8) (2.6) (2.0) 61S F S F (3.7) (3.0) (3.3) (3.1) (2.0) K-13
8 62 SERIES F Contact name IDC side connector (Receptacle) 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin PCB side connector (Plug) 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin F : RoHS compliance 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin 0 : pin Contacts name : 255 : Right angle RoHS compliance 257-F : Straight RoHS compliance Receptacle KEY (0.224) 1.5( 0.059) 0.8( 0.031) (0.551) 0.38(0.015) F B±0.5(B±0.0) 3.6(0.2) 3.81(0.) 2.54(0.)pitch C±0.2(C±0.008) 1.27(0.0) (n-1) 1.27(0.0) pitch D 6 (0.236) 3.3(0.) 4.8(0.189) 7 (0.276) 15.1(0.594) 29.5±0.5(1.1±0.0) Unit : mm (inch).4±0.5 (0.646±0.0) Product Table / Dimentions 1.27(0.0) contacts Part Number A B C D F (0.680) (0.236). (0.0) (0.0) F (0.880) (0.453) (0.0) F (0.980) (0.551).32 (0.800) F (1.180) (0.748) (0.0) 25. (1.000) F (1.480) (1.043) (1.) (1.0) F (1.680) (1.2) (1.0) 38. (1.0) F (1.880) (1.437).64 (1.0) (1.700) F (2.180) (1.752) (1.0).80 (2.000) F (2.680) (2.244).96 (2.0) 63. (2.0) F (3.180) (2.736) (2.0) 76. (3.000) 2.54 (0.) K-
9 6231 SERIES F (Straight) / (Right angle) Plug (Straight) 3-R0.5(0.0) C±0.25(C±0.0) 2.54(0.)pitch Unit : mm(inch) 0.2(0.008) MAX. A B - 0 (B- 0 ) 0.64± ±0.13 ( 0.025±0.002) (0.±0.005) 8.89 (0.3) 2.54±0.25 (0.±0.0) 6.35±0.25 (0.2±0.0) 5-1( 0.039) 3.48 (0.137) Plug (Right angle) 3-R0.5(0.0) C±0.25(C±0.0) 2.54±0.25(0.±0.0)pitch 8.89 (0.3) 2.54±0.25(0.±0.0) 6.35±0.25(0.2±0.0) 8.89 (0.3) Ref. 3.3(0.) 0.33(0.013) 6.35 (0.2) Ref. 6.4 (0.252) 0.33 (0.013) 0.5±0.05( 0.0±0.002) 0.5±0.05( 0.0±0.002) 0.2(0.008)MAX. A B - 0 (B- 0 ) 0.64± ±0.13 ( 0.025±0.002) (0.±0.005) Ref. 3.3(0.) 0.33(0.013) 2.54±0.08 (0.±0.003) KEY- 4 (0.157) 8.5(0.335) 6.25(0.246) 3.1(0.122) C±0.08(C±0.003) 2.54±0.05(0.±0.002) 0.8( 0.031)MIN. 6(0.236) 6.35 (0.2) 0.33 (0.013) 5-1( 0.039) 8.89 (0.3) 3.3(0.) Ref. 6.4 (0.252) Product Table / Dimensions contacts Part Number A B C F F F F F F F F F F.02 (0.788) 25. (0.988) (1.088) (1.288). (1.588) (1.788). (1.988) (2.288) (2.788) (3.288) (0.0) 25. (1.000) (1.) 38. (1.0) (1.700) (1.0) (2.) (2.700) (3.0). (0.0) (0.0) (0.0) (1.) (1.0).64 (1.0) (1.0).96 (2.0) (3.) 2.54(0.) 1(0.039) K-15
IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN Selector Guide. PCB Connectors
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN 41612 Selector Guide PCB Connectors FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connectors. Our
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2.5mm Pitch Drawer Connector Crimping Termination for Cable Assembly FA SERIES A-1
2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES -1 ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 008 : 8 pin 020 : 20 pin 0 : pin 022
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
IDC for 25mil(0.635mm) flat cable with One-touch locking ejector system 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8825E SERIES C-49
IDC for 25mil(0.635mm) flat cable with One-touch locking ejector system mil(1.27mm) PITCH 2 PIECE CONNECTOR 8825E SERIES C-49 C- 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 0.635mm (25mil) FC Product Concept
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
TELEPHONE/MODULAR JACK CONNECTORS
System Technical Specifications Board Mount Telephone Modular Jacks Telephone Modular Plugs ~ ~ Phone Jack 30 30 ~ 80 355 04 Series Board Mount Telephone Jacks Available in 4 and 6 ways Insulator: Gray,
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
Standard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
TX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
3M Pak 100 Wiremount Plug Series
Pak 100 Wiremount Plug Shrouded to protect against physical and chemical pin damage Open or closed end covers available Optional ejector latches Accepts flat cable or discrete wire Military (with 3518
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
.050" IDC Connectors for.025" Ribbon Cable - M73 Series
.050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
CMC CP Terminals CP 0.635mm (.025 ) CP 1.50mm (.059 ) CP 2.80mm (.110 ) FEATURES AND SPECIFICATIONS
FEATURES AND SPECIFICATIONS CMC Connectors sealed, high-density, modular and cost-effective connection system for heavy-duty applications The CMC connector family from Molex is a sealed, high-density connection
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
USB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
HD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine
Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with
2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS 11.12.438 8.83.348 5.72.225 8.83.348 11.12.438 12.70.500 Receiver Contact Part # 610 149 101 38.48 1.515 36.20 1.425 12.70.500 ITA Contact Part # 610 150 101
Materials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
Product Performance Specification Mini Power Connector
Product Performance Specification Mini Power Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Power Connector and connector system.
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
ES3 Series (WF2 Type) (culus Certified Product)
COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
Introduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
The Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 004 : 4 pin 006 : 6 pin 00
2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES K-1 F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts
Milli-Grid 2.00mm (0.79 ) Pitch. Interconnect System for Complete Design Flexibility
Milli-Grid for Complete Design Flexibility Milli-Grid 50394, 87396 Crimp Terminal 5110, 78045 Receptacle Crimp Housing 87568 IDT Receptacle 87569 IDT Strain Relief 87831, 78246 Through-Hole 87832 SMT 87833,
µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex
Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance
2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
The con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
FOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
USB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
MTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
JL05 SERIES CONNECTORS
The J0 Series connectors conforms to JISB0 specifications. J0 is a circular, waterproof connector using IPF structure. There is a one-touch locking mechanism for ease in mating and unmating. With first-to-make/last-to-break
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
USB. Amphenol UNIVERSAL SERIAL BUS CONNECTORS
Amphenol USB UNIVERSAL SERIAL BUS CONNECTORS S E R I E S DESCRIPTION The Amphenol UE27 and UE28 Series is a complete RoHS compliant interconnect solution designed in accordance with Universal Serial Bus
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The
CZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
SN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
Minitek Product Presentation
Minitek Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals 2 Value Proposition
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR. FI-J Series
COMPONENTS PRODUCT INFORMATION NEW Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR MB-0143-1 FI-J November 2005 Outline Thin wire coaxial connector compatible to AWG #42, 44 cables for
Fine-Coax Wire Connector for Portable Devices. FI-JH Series
COMPONENTS PRODUCT INFORMATION NEW Fine-Coax Wire Connector for Portable Devices FI-JH CONNECTOR MB-0179-1 November 2007 RoHS Compliant In addition to incorporating new functions such as one
PCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
DDR4 DIMM Sockets, Halogen-free
Meeting JEDEC specifications, these high-speed sockets offer greater PCB real-estate and cost savings with excellent assembly processing compatibility Meeting JEDEC specifications, Molex s Vertical SMT
RECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
0.5mm pitch stroke connector conforming to USB2.0 Standard CONNECTOR MB November DD1 Series. Reverse type.
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke connector conforming to USB2.0 Standard CONNECTOR November 2006 DD1 Series RoHS Compliant Reverse type Standard type Angle type Tilted type [Plug]
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
Product Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
USB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor
USB Type-C Connector CX Series Overview Note: Please contact us for TID acquisition status of each product. The CX series connector conforms to the next-generation USB standard USB Type-C. It is expected