Table of Contents. Lucas Nülle GmbH Page 1/55

Transcription

1 Table of Contents Table of Contents Electrical Power Engineering, Smart Grid Trainers Basics of electrical power engineering Fundamentals of power engineering (UniTrain) EUB Current and voltage transformers EUB 1 Current transformers for protective installations EUB 2 Voltage transformers for protective installations Lucas Nülle GmbH Page 1/55

2 Electrical Power Engineering, Smart Grid Trainers Training systems on the generation, distribution and management of electrical energy: Power engineering training system, distribution training system Energy generation training system, renewable energy generation training system Transformer training system, high-voltage transmission lines training system, protective systems training system Energy management training system, smart grid training systems The Lucas-Nülle training systems have been designed in anticipation of the newest developments: Smart measuring instruments provided with various communication interfaces (e.g. LAN, RS485, USB) and control elements SCADA Power Engineering Lab software for the intelligent control and evaluation of "smart grids" using Soft PLC SCADA software designed for educational purposes Permits investigation of dynamically alternating loads and power generation inside the laboratory Intelligent energy management Modular integration of renewable energies into a smart grid using protective engineering Wind power plant with doubly-fed asynchronous generator (DFIG) and synchronisation to the grid Interactive multimedia training course Training systems on the generation, distribution and management of electrical energy: Power engineering trainer, distribution trainer Energy generation trainer, renewable energy generation trainer Transformer trainer, high-voltage transmission lines trainer, protective systems trainer Energy management trainer, smart grid trainers The Lucas-Nülle training systems have been designed in anticipation of the newest developments: Smart measuring instruments which avail of various communication interfaces (e.g. LAN, RS485, USB) and control elements SCADA Power Engineering Lab software for the intelligent control and evaluation of the "Smart Grid" with soft plc Didactically designed SCADA software Permits investigation of dynamically alternating loads and power generation inside the laboratory Intelligent energy management Modular integration of renewable energies into the smart grid using protective engineering Wind power plant with doubly-fed asynchronous generator (DFIG) with mains sychronisation Interactive multimedia training course Lucas Nülle GmbH Page 2/55

3 Basics of electrical power engineering Basics of electrical power engineering Multimedia-based and Practice-oriented Introduction to Power Engineering With the aid of numerous experiments and animations, the UniTrain-I multimedia course gives the student insight into the latest important issues relating to power engineering. The fundamentals of DC, AC and threephase technology as well as processes in distribution networks are some of the subjects dealt with in the various courses. Typical processes that occur in the generation and distribution of electrical power receive particularly close attention and are reproduced in the experiments using safe extra-low voltages. Experiment with current and voltage transformers form the basis for experiments with protective relays. Lucas Nülle GmbH Page 3/55

4 Fundamentals of power engineering (UniTrain) Fundamentals of power engineering (UniTrain) UniTrain-I multimedia courses in energy supply technology utilise countless experiments and animations to convey an insight into present-day considerations in the electricity supply industry. Generation of energy from regenerative sources and processes utilised in distribution networks are among the topics covered by the various courses. Typical procedures which are of particular importance to electricity supply technology are taught by means of experiments using non-hazardous safety extra-low voltage (SELV). List of articles: Lucas Nülle GmbH Page 4/55

5 A host of multimedia courses are available for the UniTrain-I system in the areas of electrical engineering and electronics. Each of the courses consists of the training program, specific circuitry on one or more experiment cards and a browser (LabSoft) for the control, management and display of the training course. UniTrain-I courses convey practical skills by providing a theoretical basis then guiding students through numerous experimental measurements. Experiment cards are linked to the Interface and the training program via Experimenters. With the help of virtual instruments and power sources included with the system, circuits can be analysed and results of measurements stored directly within the training program. Hardware Experiment cards with specific circuits and components allowing the measurements in the course to be made as well as permitting unguided experimentation. Simple set-up: simply insert into the Experimenter Experiment cards connected to the system via UniTrain-I bus Modifiable, open experiment set-up on experiment cards allow experiments to be started quickly Points for measurement all made available via 2-mm sockets Systematic fault simulation, faults can be switched on and off by relays via the UniTrain-I bus Industry-standard circuits, highly relevant to modern practice Supplied in hard case for transport and storage Software Interactive, HTML-based multimedia courses to provide theoretical knowledge and practical skills Theory, experimental procedure, evaluation, fault simulation and sample solutions Animations, graphics and images to explain theory and experiment set-ups All courses may be edited using an HTML editor LabSoft: browser with menu, navigation and display windows for display and conduct of all UniTrain-I courses Virtual instruments (VIs) are made available for real-time measurement or for generating output signals. Navigation to any point within the course User-specific documentation, evaluation and storage of experimental results Management of courses, users and user groups Optional integration of circuit simulator, course editor, etc. into the menu structure. Self-designed courses may be integrated and displayed Languages: D, GB, F, E (others available on request) Lucas Nülle GmbH Page 5/55

6 Pos. Product name Bestell-Nr. Anz. 1 Course - Electrical engineering 1: DC technology SO4204-4D 1 Includes: 1 Experiment card with various resistor circuits, capacitor and coil 1 Experiment card with voltage divider circuits 1 Experiment card with circuits for studying temperature, light and voltage-dependent resistors CD-ROM with Labsoft and course software Course contents: Familiarisation with the term electricity Examples of the use of electricity Introduction to the Bohr model of the atom Electric charge and electric fields Differences between conductors, insulators and semiconductors Familiarisation with the terms current, voltage and resistance Investigation of a simple electrical circuit with a lamp Different types of DC sources Measurement using voltmeters and ammeters Colour coding and design of resistors Experimental verification of Ohm's law Experimental verification of Kirchhoff's laws Measurements on resistances in series and parallel Investigation of circuits with resistors in mixed series and parallel connection Measurements on voltage divider circuits with fixed/variable resistors Measurements on bridge circuits Power measurements in DC circuits Investigation of the in-circuit response of variable resistors (LDRs (photocells), NTC and PTC thermistors, VDRs) Measurement and interpretation of variable resistor characteristics (LDR, NTC, PTC, VDR) Measurements on coils and capacitors in a DC circuit Fault simulation (9 simulated faults activated by relay) Course duration 8 h approx. (fault finding 1.5 h approx.) Lucas Nülle GmbH Page 6/55

7 2 Course - Electrical engineering 2: AC technology SO4204-4F 1 Includes: 1 Experiment card with R, L, C passive components for combination using 2-mm sockets 1 Experiment card with RLC resonant circuits, 1 circuit tunable 1 Experiment card with 1 power transformer, 1 repeater transformer and load circuits CD-ROM with Labsoft browser and course software Course contents: The distinction between DC and AC variables Characteristics of sinusoidal signals RMS values of various periodic signals Using vector diagrams to depict sinusoidal signals Using vector diagrams for computation Introduction to characteristic parameters for capacitors and inductors How capacitors and coils store energy Determining the capacitance of capacitors by measurement Determining the inductance of coils by measurement Introduction to the term reactance and the difference between capacitive reactance and inductive reactance Determining the reactance of coils and capacitors by experiment Investigating the AC-response of RC and RL voltage divider circuits Investigating the frequency response of simple filter circuits for alternating and square-wave voltages How electrical resonant circuits work Introduction to the terms resonance, quality Q, bandwidth and critical frequency of resonant circuits Measuring the frequency response of series and parallel resonant circuits Tuning a parallel resonant circuit with a varicap diode Explanation of the terms active, reactive and apparent power Investigating response of transformers to loads: loaded, unloaded and short-circuit measurements Identifying the typical areas of application for power and repeater transformers Measurement and analysis of the frequency response of power transformers Investigating the frequency response of repeater transformers Measurement and analysis of the frequency response of repeater transformers Fault simulation (4 simulated faults activated by relay) Course duration 8 h approx. (fault finding 1 h approx.) Lucas Nülle GmbH Page 7/55

8 3 Course - Electrical engineering 3: Three-phase technology SO4204-4H 1 Includes: 1 Experiment card with 1 circuit in star configuration and 1 in delta configuration plus resistive and capacitive loads 1 Experiment card 3-channel oscilloscope for voltage and current measurement CD-ROM with Labsoft browser and course software Course contents: Becoming familiar with three-phase applications Familiarisation with terms used in three-phase systems Measurement of phase and line quantities in three-phase networks Determining and identifying laws relating phase voltages by measurement Investigating resistive and capacitive loads in star and delta circuits Determining phase shift between phase voltages Measurement of compensating currents in neutral conductors and explanation of the effect of breaks in the neutral line Current and voltage measurements for symmetrical and asymmetrical loads Measurement of power with a three-phase load Course duration 4 h approx. Lucas Nülle GmbH Page 8/55

9 4 Course - Electrical engineering 4: Magnetism/electromagnetism SO4204-4A 1 Includes: 1 Experiment card with 7 specific circuits Transformer with removable iron core Compass needle for investigating magnetic fields Electromagnetic components: reed switches, Hall switches and relays CD-ROM with Labsoft browser and course software Course contents: Explanation of the phenomenon of magnetism Identification of magnetic materials Listing examples for the use of magnetic materials in electrical engineering Introduction to and explanation of the terms magnetic poles, magnetic fields, field lines and field intensity Investigating the magnetic field of a current-carrying conductor Investigating the magnetic field of a coil (with air, with iron core) Introduction to and explanation of the term electromagnetic induction Investigating the switch-on and switch-off response of an inductor Lorentz force Design and function of a transformer Investigating the effect of an iron core on the transmission response of a transformer Determining the transmission ratio of a transformer by measurement Measuring the response of a transformer to various loads Design of electromagnetic components: relays, reed switches Experimental demonstration of the function of relays and reed switches Experimental investigation of application circuits using electromagnetic components: control circuits with latching, Hall sensors Course duration 4 h approx. Lucas Nülle GmbH Page 9/55

10 5 Course - Electrical engineering 5: Conducting measurements with the multimeter SO4204-4B 1 Includes: 1 experiment card with components for measuring current, voltage and resistance Circuit for measurement of unknown components Digital multimeter Multi 13S CD-ROM with Labsoft browser and course software Course contents: Multimeter controls Identifying potential dangers in measurements on electric circuits Measuring AC and DC voltages with a multimeter Measuring AC and DC currents with a multimeter Measuring resistance with a multimeter Measuring diodes with a multimeter Measurements using balance and contact methods Matching measuring ranges Identifying possible errors in measurements Identifying unknown components in a circuit by measuring voltage and current Duration of course: 3 hours approx. Lucas Nülle GmbH Page 10/55

11 6 Course - Electrical engineering 6: Electrical network analysis SO4204-4C 1 Includes: 1 Experiment card with connector panel for setting up resistor networks 2 Constant current and 2 constant voltage sources 15 Plug-in resistors on card CD-ROM with Labsoft browser and course software Course contents: Introduction to basic equations used in electrical networks Applying Kirchhoff's equations to a resistor network Analysing resistor networks using Kirchhoff's equations Power matching in resistor circuits Conversion of electrical networks(star-delta conversion) Introduction to superposition theorem and its application Simplification of resistor networks using Thevenin's theorem Simplification of resistor networks using Norton's theorem Simplification of resistor networks with 2 sources using Millman's theorem Thevenin-Norton equivalencies Analysing resistor networks using the loop or mesh current method Analysing resistor networks using the node voltage method Course duration: 5 h approx. Lucas Nülle GmbH Page 11/55

12 7 Course - Electrical engineering 7: Electromagnetic compatibility (EMC) SO4204-4K 1 Includes: 1 Experiment card with parallel tracks for studying galvanic, inductive and capacitive coupling effects, with measuring amplifier CD-ROM with LabSoft browser and course software Course contents: Familiarisation with terminology for electromagnetic compatibility, EMC Electromagnetic coupling effects Natural and man-made sources of interference Key European standards and guidelines for EMC Measurement of galvanic coupling between two parallel tracks Measurement of capacitive coupling between two parallel tracks Measurement of inductive coupling between two parallel tracks Ways of improving the EMC characteristics of a circuit Ways of improving the resistance to interference of a circuit Course duration: 4 h approx. Lucas Nülle GmbH Page 12/55

13 8 Course - Power engineering: Transient processes in AC and DC networks SO4204-3B 1 Includes: 1 Experiment card with resistor, inductor coil and capacitor that can be connected in any configuration for the purpose of studying response when powered up or down with DC or AC voltages. Transient analyser for switching and measurement of switching processes, DC, 50Hz and 60 Hz, Disturbance generator Adjustable switching point for switching at a precise phase, angular resolution 1 Variable measuring times CD-ROM with Labsoft browser and course software Course contents: Importance of switching processes in power supply networks Effects (and hazards) of switching processes in power supply networks Experimental investigation of current and voltage response when powering up a circuit with a DC voltage Effect of various loads (R, L, C) on the signal response Experiment-based investigation of current and voltage response when powering up a circuit with an AC voltage How the on and off switch time affects circuit response Measurement of signal response when the circuit is turned off at different times Determining optimum switching time Analysis of switching complex loads (R, L, C) on and off at different points in time Course duration: 3.5 h approx. Lucas Nülle GmbH Page 13/55

14 9 Course - Single- and Three-phase transformers SO4204-7Y 1 Includes: 1 Experiment card with three-phase transformer, with 12 windings and tapings for study of single phase and three phase transformers and transformer circuits, three-phase load, useable for star and delta connection CD-ROM with Labsoft and course Course contents: Principles of transformers Study of load characteristics of single phase transformers, for one quadrant and four quadrant operation Measurement of current and voltage under load / no-load conditions Study of the transformation ratio Equivalent circuit diagram Study of three-phase transformers Study of various three-phase transformer circuits and their effects on load / no-load operation Study of various circuits with unbalanced load Determination of short circuit voltage Duration approx. 3 h Lucas Nülle GmbH Page 14/55

15 10 Course - Electric Machines 3: Synchronous and slip-ring machines SO4204-7U 1 Includes: 1 Experiment card including stator with three-phase winding and starting resistors 3 Rotors: slip-ring rotor, synchronous rotor and reluctance rotor Stroboscope with extra-bright LED CD-ROM with Labsoft browser and course software Course contents: Identifying the most common applications for synchronous rotors, slip-ring rotors and reluctance machines Explanation of a how a magnetic field arises in rotating field machines Explanation of the design and function of synchronous, slipring and reluctance machines Introduction to the key components of synchronous, slip-ring and reluctance machines (including salient pole, non-salient pole and reluctance rotors) Introduction to circuit diagrams, terminal charts and nominal data for synchronous, slip-ring and reluctance machines Interpreting a rating plate Introduction to the principles of speed control of slip-ring rotor machines Experimental investigation of the operating response of slipring rotor machines. Measurement of rotor voltages with open and shorted rotor windings, response to starting resistors, determining slip and speed by means of voltage measurements Explanation of the differences between motor and generator operation of synchronous machines Introduction to the principles of speed control of synchronous machines Experimental investigation of the operating response of synchronous machines: run-up behaviour, speed measurement, power factor determination (cos j) with the aid of current and voltage measurements Experimental investigation of the operating response of reluctance machines: creation of torque, run-up response, asynchronous and synchronous operation, reversal of rotation, power factor determination (cos j) with the aid of current and voltage measurements Course duration 5 h approx. Lucas Nülle GmbH Page 15/55

16 Additionally required: Pos. Product name Bestell-Nr. Anz. 11 UniTrain Interface with virtual instruments (basic VI) CO4203-2A 1 The UniTrain Interface is the central unit of the UniTrain system. It incorporates all inputs and outputs, switches, power and signal sources and measurement circuitry needed to perform experiments. The Interface is controlled via the connected PC. Equipment: 32-bit processor with storage memory for measurements USB interfaces, transfer rate 12 Mbits/s WLAN/WiFi interface, 2.4 GHz, IEEE b/g/n Simultaneous connection of any number of Experimenters via serial bus system High-quality designer casing with aluminium feet and surface-hardened Plexiglas front panel Suitable for accommodating in training panel frames for DIN A4 training panels Designed for connection of 2-mm safety measuring leads Multi-coloured LEDs for displaying status Adjustable analog output, +/-10 V, 0.2 A, DC 5 MHz, via BNC and 2-mm sockets 4 Analog differential amplifier inputs with 10 MHz band width, safe for voltages up to 100 V, sampling rate 100 mega samples, 9 measuring ranges, memory depth 4 x 8 k x 10 bits, inputs via BNC (2 inputs) or 2-mm sockets (4 inputs) 2 Analog inputs for current measurement, overcurrentprotected up to 5 A, sampling rate 250 kilo samples, 2 measuring ranges, resolution 12 bits, connection via 2-mm sockets 16-bit digital signal output, of which 8 bits are accessed via 2- mm sockets, TTL/CMOS, clock frequency khz, electric strength +/- 15 V 16-bit digital signal input, of which 8 bits are accessed via 2- mm sockets, memory depth 16 bit x 2 k, TTL/CMOS, sampling rate khz, electric strength +/- 15 V, 8 Relays, 24 V DC/1 A, of which 4 are accessed via 2-mm sockets Dimensions: 29.6 x 19 x 8.6 cm External power supply with wide range input V, Hz, output 24 V/5 A Weight (including power supply): 2.1 kg Virtual instruments (meters and sources): 2 x Voltmeter VIs, 2 x Ammeter VIs: AC, DC, 9 ranges, 100mV to 50V, true RMS, AV 1 x VI with 8 relays, 1 x Multimeter VI: multimeter display (optional LM2330, LM2331 or LM2322) in LabSoft 1 x 2-channel ammeter VI: AC, DC, 2 ranges, 300 ma and 3 A, TrueRMS, AV 1 x 2-channel voltmeter VI: AC, DC, 9 ranges, 100 mv to 50 V, Lucas Nülle GmbH Page 16/55

17 TrueRMS, AV 1 2-/4-channel oscilloscope: band width 10 MHz, 25 time ranges, 100 ns/div to 10 s/div, 9 ranges 20 mv/div to 10 V/div, trigger and pre-trigger, XY and XT modes, cursor function, addition and multiplication function for 2 channels 1 x Adjustable DC voltage VI 0-10 V 1 x Function generator VI: 0.5 Hz - 5 MHz, 0-10 V, sine, square, triangular, 1 x Arbitrary generator VI, 1 x Pulse generator VI 1 x VI with 16 digital outputs, 1 x VI with 16 x digital inputs, 1 x VI with 16 digital input/outputs. Display modes: binary, hex, decimal and octal numerals 1 x Three-phase power supply VI, Hz, 0-14 Vrms, 2 A (requires CO4203-2B) 1 x Adjustable DC power supply VI, 3 x (-20 V V), 2 A (requires CO4203-2B) 1 x Three-phase power supply VI with additional phase-shift and clock rate adjustment (requires CO4203-2B) Includes: Interface Power supply Power lead USB cable CD with basic software Operating manual System requirements: Personal computer with Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 (32 or 64 bit version) CD-ROM drive for installing software USB port for connection to Interface Lucas Nülle GmbH Page 17/55

18 12 UniTrain Experimenter CO4203-2B 2 UniTrain Experimenter for coupling to the UniTrain Interface or to other Experimenter modules. Equipment: Connects to the UniTrain Interface and additional Experimenters via UniTrain bus UniTrain bus connection for experiment cards High-quality designer casing with aluminium feet and surface-hardened Plexiglas front window Suitable for accommodating training panel frames for DIN A4 training panels Fixed and variable voltages available via 8 2-mm sockets Designed for connection of 2-mm safety measuring leads Accommodates UniTrain experiment cards Eject mechanism for UniTrain experiment cards with return spring Accommodates a breadboard for experimenting with discrete components and integrated circuits Accommodates a multimeter using IrDa interface Dimensions: 29.6 x 19 x 8.6 cm Weight: 1.0 kg 13 UniTrain-I measurement accessories, shunts and connection cables SO4203-2J 1 Shunt resistors on a PCB, for current measurement using the analog inputs of the UniTrain system. 6 Shunt resistors: 2 x 1 ohm, 2 x 10 ohm, 2 x 100 ohm Screen print of symbols for identifying resistors, the voltage taps and current inputs 24 x 2-mm sockets Dimensions: 100 x 40 mm Set of connection cables 2mm (22 pcs) for UniTrain consisting of: 8 x connection leads 2mm, 15cm, blue 4 x connection leads 2mm, 15cm, yellow 2 x connection leads 2mm, 45cm, black 2 x connection leads 2mm, 45cm, yellow 2 x connection leads 2mm, 45cm, red 2 x connection leads 2mm, 45cm, blue 2 x adapter leads 4mm to 2mm, 50cm, white 10 x 2-mm connector plugs / Plug spacing 5mm Lucas Nülle GmbH Page 18/55

19 Additionally recommended Pos. Product name Bestell-Nr. Anz. 14 Multi13S digital multimeter LM Universal precision lab multimeter and temperature meter with IR interface for high-quality, universal measurement and testing in educational settings, power plants, process control installations etc. 3¾-digit multimeter; resolution: ±3,100 digits Measurement classification CATII-1000V Can be connected to UniTrain system via IR interface Voltage and current measuring ranges: 30mV-1000V DC, 3V-1000V AC; 3mA-16A DC; 30mA-10A AC Resistance ranges: 30ohm-30Mohm Special functions: for temperature measurements using PT100/1000 thermocouple (optional accessory) Continuity and diode testing Automatic range selection and battery shut-off, min./max. and data hold function Safety fuse for current measurement range up to 300mA Protection against high currents in the ma range for nominal voltage of 1000V Display with bar chart and backlighting Includes protective sleeve, measuring leads, 1 x spare fuse, 9V battery, calibration certificate 15 UniTrain storage case for one system CO4203-2Y 1 Sturdy aluminium case with moulded foam block to accommodate a complete UniTrain system (without equipment) Capable of accommodating 1 Interface, 2 Experimenters, 1 power supply as well as cables and smaller accessories Lockable padlock; stable padlock hinge Colours: aluminium, black, chrome Dimensions: 610 x 480 x 100 mm Weight: 4,6 kg Lucas Nülle GmbH Page 19/55

20 Recommended learning management software for all LN multimedia courses: Optionally available: multi user license with 5 or 10 dongles and update to version 4.0 Pos. Product name Bestell-Nr. Anz. 16 LabSoft Classroom Manager 4.0 software suite, single license SO2001-5A 1 LabSoft Classroom Manager is a comprehensive set of administration software for the UniTrain system and all LabSoft courses. Classroom Manager comprises the following independent program components: LabSoft Manager: Administration of students and courses in LabSoft LabSoft Reporter: Student reports and statistics LabSoft Editor: Creation and editing of courses and tests LabSoft Questioner: Creation of questions, measuring exercises and sets of questions for courses and tests LabSoft TestCreator: Automatic generation of tests on the basis of sets of questions Features: Ease of use of all programs thanks to graphical user interface in all component programs For use in local area networks or on stand-alone PC Ease of installation No additional database software required Access control via USB dongle Available languages: DE, EN, ES, FR, RU, PT, ZH, LO LabSoft Manager: Administration of LabSoft network installation Lucas Nülle GmbH Page 20/55

21 Administration of an unlimited number of students and courses in LabSoft Addition, deletion and editing of courses and tests in LabSoft Addition, deletion and editing of students and student data Addition, deletion and editing of student groups (classes) Assignment of students to classes Assignment of courses and tests to students or classes LabSoft Reporter: Electronic monitoring of student progress Graphical presentation of progress in courses and tests Presentation of student or group results Reports on courses, tests, single users or classes Summary of results and time Calculation of average results for groups Multiple search options for students, classes, courses or tests LabSoft Editor: HTML editor for easy to use editing of LabSoft courses Editing of course pages Wizard for creation of new courses and course pages Automatic inclusion of new courses in an existing LabSoft installation Automatic creation of IMS-compatible navigation tree without the need for programming knowledge Moving course pages within the navigation tree at the click of a mouse Editing in WYSIWYG mode HTML view and page preview Insertion of graphics, animations and tables Insertion of test questions Page templates for a variety of page types LabSoft Questioner: Program for creating and editing questions, practical measuring exercises and sets of questions (question files) for electronic evaluation Easy creation of exercises and questions for courses and tests 7 different types of question: single and multiple choice, missing text, assignment, matrices, arbitrary text, selection of images Ability to input meta data (points, time for questions, difficulty, required resources, etc.) Easy specification of tolerances for practical measuring exercises LabSoft TestCreator: Program for automatically creating electronic tests from sets of questions (question files) Automatic and manual selection of questions and measuring exercises Filter functions (e.g.: type of question, difficulty) for preselection of questions Automatic generation of tests according to a set time or number of questions Lucas Nülle GmbH Page 21/55

22 Various test options: arbitrary order of questions in a test, immediate display of results after completion Automatic registration of tests in LabSoft Preview function showing the test as created Includes: CD-ROM with LabSoft Classroom Manager 1 USB-dongle for operation of program System requirements: Server or PC with Windows Vista, 7, 8 or 8.1 Microsoft Internet Explorer 7.0 or higher Minimum 100 MB free disk space 1 free USB-port for USB-dongle 17 Collection of assignments Electrical engineering UniTrain SO2001-6A 1 Collection of electronic assignments with questions and measuring exercises for the UniTrain courses on the topic of electrical engineering. With the help of LabSoft TestCreator, these questions and measuring exercises can easily be assembled into electronic tests. A total of some 200 questions and measuring exercises for the UniTrain courses on the topics of DC technology, AC technology, three-phase technology, magnetism/electromagnetism, conducting measurements using multimeters, circuit analysis and electromagnetic compatibility (EMC) About 25% are practical exercises to be carried out using the training systems in order to test handling skills and practical abilities About 30% are newly assembled questions previously contained in the courses It is possible to extend the collection with your own questions and assignments Other collections can be imported All questions and assignments can be edited 6 different types of questions (single choice, multiple choice, missing text, matching, matrix matching and image choice) Extensive metadata for all questions and assignments to make it easier to create tests (degree of difficulty, points, topic area, time to complete, type of question, training systems needed for practical exercises) Lucas Nülle GmbH Page 22/55

23 18 Collection of assignments Power Engineering / Renewable Energies SO2001-6D 1 Collection of electronic assignments questions and measuring exercises for the UniTrain courses on the topic of electrical power engineering and renewable energies. With the help of Labsoft TestCreator, these questions and measuring exercises can easily be assembled into electronic tests. The tests can then be carried out in LabSoft. A total of some 200 questions and measuring exercises for the UniTrain courses on the topics of Photovoltaics, Fuel cell technology, Transient processes in AC and DC networks and the multimedia course Small wind power plant About 25% are practical exercises to be carried using the training systems in order to test handling skills and practical abilities About 30% are newly assembled questions previously contained in the courses It is possible to extend the collection with your own questions and assignments Other collections can be imported All questions and assignments can be edited 6 different types of questions (single choice, multiple choice, missing text, matching, matrix matching and image choice) Extensive metadata for all questions and assignments to make it easier to create tests (degree of difficulty, points, topic area, time to complete, type of question, training systems needed for practical exercises) Lucas Nülle GmbH Page 23/55

24 EUB Current and voltage transformers EUB Current and voltage transformers A wide spectrum of current and voltage transformers are used for various requirements in electrical power engineering. The experiments include a practical hands-on investigation of transfer response, over-current factor, absolute and phase angle error, as, for example, under varying loads. In addition to this, standard operation requirements, short-circuit and asymmetrical faults can also be explored. The protection of system facilities and components is not only dependent on selective protection equipment but also on the detection and measurement of the lowest fault currents and voltages. Various types of measurement circuits have to be used for different star-point circuit configurations in order to correctly detect and localise potential fault types. Lucas Nülle GmbH Page 24/55

25 EUB 1 Current transformers for protective installations EUB 1 Current transformers for protective installations Training contents Secondary transformer current as a function of the primary current Effect of the load on current ratio error Check rated overcurrent factor Transformer circuit in three-wire system Transformer circuit in four-wire system Determine zero residual current Lucas Nülle GmbH Page 25/55

26 Basic equipment set, consisting of: Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 19 Current transformer, 3 phase CO3301-4T 1 Three-phase current transformer for use in instrumentation and protection technology. Input current: L=2,5A Output current: I=1A Power rating: 1VA Accuracy: class 1 Overcurrent factor: FS 10 Inputs/outputs: 4mm safety sockets Dimensions: 297 x 114 x 150mm (HxWxD) Weight: 6kg 20 Balancing transformer CO3301-4W 1 The core-balance transformer is used in earth-leakage circuit breaker (e.l.c.b) protection circuits, where the sum of the currents is monitored in the transformer by the current operated e.l.c.b system. Input current: L1 = 1 A L2 = 1 A L3 = 1 A Output current: 1A Power voltage: 5VA Accuracy: class 1 Inputs/outputs: 4mm safety sockets Dimensions: 297 x 114 x 190mm (HxWxD) Weight: 2kg Lucas Nülle GmbH Page 26/55

27 21 Load for current transformer CO3301-3T 1 The load is variable rheostat and is suitable for use when recording transformer characteristics to establish the class of accuracy. Rheostat: ohm (smoothly variable) Power rating: 4W Inputs/Outputs: 4mm safety sockets Dimensions: 297 x 114 x 140mm (HxWxD) Weight: 1kg Lucas Nülle GmbH Page 27/55

28 Media: Lucas Nülle GmbH Page 28/55

29 Pos. Product name Bestell-Nr. Anz. 22 Interactive Lab Assistant: Current and voltage converters SO2800-6C 1 The experiment instructions come in the form of an Interactive Lab Assistant course. This multimedia course is a step-by-step guide through the topic of modern energy systems. The fundamentals are conveyed using easy to understand animations. The Interactive Lab Assistant in conjunction with the SCADA Viewer constitutes a comfortable experimenting environment. Special features: Interactive experiment setups Measured values and diagrams can be stored in the experiment instructions per drag and drop The SCADA Viewer can be started directly from the experiment instructions Includes questions with feedback and evaluation logic for progress monitoring Documents can be printed out for hardcopy of experiment instructions including solutions CD-ROM with Labsoft browser, course software and SCADA Viewer Training contents Secondary transformer current as a function of the primary current Effect of the load on current ratio error Checking rated overcurrent factor Transformer circuit in three-wire system Transformer circuit in four-wire system Determining zero residual current Voltage transformer characteristics Calculation of voltage faults and class of accuracy Effect of loads on the transformation ratio Three-phase voltage transformer in a healthy grid Three-phase voltage transformer in a grid with earth fault on the primary side Course duration 4 h approx. Lucas Nülle GmbH Page 29/55

30 Software: Pos. Product name Bestell-Nr. Anz. 23 Software SCADA Viewer SO4001-3H 1 The 'SCADA Viewer' is a software program used for the control and monitoring of power engineering systems. With the software it is possible to display all measured values and operating states inside the system in real time on the existing measuring instruments. Important parameters and signals can be controlled by the software. The measured values and operating states of the equipment can be selected, recorded and plotted over time, evaluated and then exported. Using the 'SCADA Viewer' projects in power engineering are not only made transparent but readable. Software functions: Display of measured values and operating states in real time Plotting of measured values over time in diagrams Processing, analyzing and exporting of diagrams The SCADA viewer contains more than 20 predefined projects Many projects designed with the SCADA designer can be individually expanded at will 24 Patch cable Cat5E 1x 1m yellow, 2x 2m yellow LM x 1m yellow 2x 2m yellow Lucas Nülle GmbH Page 30/55

31 25 USB Network Adapter 10/100 BaseTX RJ45 LM USB-Ethernet adapter provides simple network access without having to install expansion card. The adapter is thus well-suited especially for cases where there are no more slots available in the PC or the housing should not be opened. This adapter is also an alternative for notebooks: instead of a PC card with an Ethernet port the adapter offers a universal connection option for all PCs with USB interface. USB 2.0 high-speed device Downward compatible with USB 1.1 and 1.0 Host controllers Compatible with IEEE 802.3u, 10/100 Base-T and TX Supports both full and half-duplex mode on Ethernet interface Operating systems: Windows ME/200/XP/Vista,7 (32+64 Bit), Linux, Mac OS 10.x 26 5-Port Ethernet Switch LM Port Ethernet Switch 5 RJ45 terminals Power supply Lucas Nülle GmbH Page 31/55

32 Power supply: Pos. Product name Bestell-Nr. Anz. 27 Adjustable 3-phase power supply, 0-450V/2A CO3301-3Z 1 Controllable 3-phase power supply unit /450V for continuous 3-phase supply Power connection: 230/400V, 50/60Hz Output voltage: 3x V, 50/60Hz variable by means of 3- phase regulating transformer (tolerance 0.5%) DC output V Output current: 2.0A 4-mm safety sockets (L1, L2, L3, N, PE, L-, L+) 1 Voltmeter, V (moving iron instrument) 1 Ammeter, 0...3A (moving iron instrument) 3 Phase control lights 1 Measuring point selector switch. L1-N, L2-N, L3-N, L1-L2, L1-L3, L2-L3 1 Measuring point selector switch. I1, I2, I3 Protection: 3 thermo-magnetic device circuit breakers, Motor protection switch adjustable from A with undervoltage trip Table-top housing with fold-away stand Dimensions: 175 x 370 x 260mm (HxWxD) Weight: 15kg 28 Multiple socket outlet, 6 fold, with illuminated switch ST8010-4J 1 Multiple socket outlet, 6 fold, with illuminated switch, 2 pole 6 earth pin sockets acoording to DIN49440, 250V~,16A power cord 1,5m Dimensions: 439 x 60 x 44mm (LxWxH) Lucas Nülle GmbH Page 32/55

33 Measuring instruments: Pos. Product name Bestell-Nr. Anz. 29 Three-phase power quality meter, display and long-term memory CO5127-1S 2 The three-phase measuring instrument permits the measurement and display of relevant power network parameters. It is able to measure single, two-phase or three-phase measurements. The display and operation is carried out by means of menu navigation with an LC display or the integrated Ethernet interface. The optional SCADA software provides for the display of all measurements and allows the implementation and analysis of intelligent networks (smart grids). The smart meter acts as a digital electricity meter where end customers are connected to the grid in order to measure electricity consumption and can be used to turn consumers on or off depending on the circumstances. Three-phase measurement of current and voltage 3x400V/5A Measurement of phase voltages, line-to-line voltages and currents Determination of the apparent, active and reactive power Determination of active, reactive and apparent work Determination of the frequency and distortion factors for current and voltage Detection of harmonic oscillations and neutral conductor current in the electricity supply Pulse measurement Peak and mean value detection Event logging Real-time clock Large-scale, contrast-rich graphic display with background illumination Display in tables, diagrams and vector diagrams 2 Digital inputs and outputs for free configuration including functions Ethernet interface Menu navigation in German/English/ French/Spanish/Italian/Portuguese/Turkish/ Chinese/Russian/Polish Demonstration measuring instrument for making measurements on the electricity supply grid Max. measurement values: Voltage P-P: 690 V Current: 5 A Fault tolerances: Voltage 0.2% Current 0.2% Apparent power 0.5% Active power 0.2% Reactive power 1% Active energy Class 0.2 Reactive energy Class 2 Operating voltage: 110V-230V, 50/60Hz Dimensions: 297 x 228 x 140mm (HxWxD) Weight: 2kg Lucas Nülle GmbH Page 33/55

34 30 Digital/analog multimeter, wattmeter, power-factor incl. software CO5127-1Z 1 The areas of electrical machines, power electronics and drive technology pose particular problems for measuring instruments. In addition to high-performance overload protection, the acquisition of measurement values must be performed accurately independently of the curve's shape. The universal measuring device has been designed particularly to satisfy these requirements. It can simultaneously replace as many as four different measuring instruments constituting a current/voltmeter, power and phaseangle meter all in one. The graphic display allows for both student as well demonstration experiments. The VI Starter software included allows for visualisation of measurements on a PC. Simultaneous, measurement of voltage and current independent of the curve shape (max. 600 V, 20 A) (measurement of clocked voltages) Calculation of active, apparent and reactive power as well as the power factor Measurement of the total rms (RMS-AC+DC), AC rms (RMS- AC) and arithmetic mean (AV-AC+DC) Impervious to electrical damage up to 20 A/600 V Large-scale, high-contrast background-illuminated graphic display (5.7") Large-scale display or display of up to 4 measurement values Digital or pseudo-analog display USB interface Internal resistance: current path 10 mω, voltage path 10 MΩ Voltage ranges: 30, 300, 600 V Current ranges: 1, 10, 20 A Measurement accuracy: 2% Automatic or manual measurement range selection Demonstration test instrument for measuring properties of the electricity supply Operating voltage: 230V, 50/60Hz Dimensions: 297 x 228 x 140mm (HxBxT) Weight: 2kg The VI Starter software allows all the measurements to be displayed on the PC. Up to 17 different displays can be opened. Oscilloscope display of voltage, current and power Consumption meter to display power consumed and output Data logger for 14 different variables Data export for data logger Characteristic recorder Labview driver and supplied examples 32-bit version for Windows Lucas Nülle GmbH Page 34/55

35 31 Multi13S digital multimeter LM Universal precision lab multimeter and temperature meter with IR interface for high-quality, universal measurement and testing in educational settings, power plants, process control installations etc. 3¾-digit multimeter; resolution: ±3,100 digits Measurement classification CATII-1000V Can be connected to UniTrain system via IR interface Voltage and current measuring ranges: 30mV-1000V DC, 3V-1000V AC; 3mA-16A DC; 30mA-10A AC Resistance ranges: 30ohm-30Mohm Special functions: for temperature measurements using PT100/1000 thermocouple (optional accessory) Continuity and diode testing Automatic range selection and battery shut-off, min./max. and data hold function Safety fuse for current measurement range up to 300mA Protection against high currents in the ma range for nominal voltage of 1000V Display with bar chart and backlighting Includes protective sleeve, measuring leads, 1 x spare fuse, 9V battery, calibration certificate Accessories: Pos. Product name Bestell-Nr. Anz. 32 Variable Ohmic load, three-phase, 1kW CO3301-3F 1 Three synchronously adjustable circular rheostats with scale 100-0%, each with a fuse in the sliding-contact connection. for parallel, series, star and delta circuits Resistance: 3 x 750 Ohm Current: 3 x 2 A Inputs/outputs: 4mm safety sockets Dimensions: 297 x 456 x 125mm (HxWxD) Weight: 8kg Lucas Nülle GmbH Page 35/55

36 33 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 40 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour black 34 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 3 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour blue 35 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 2 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour green/yellow Lucas Nülle GmbH Page 36/55

37 36 Set of safety measurement cables, 4mm (31 leads) SO5148-1L 1 Safety measurement cables with 4mm safety plugs, coloured, PVC insulation, highly flexible Each set includes the following: 6 x 25cm long, black 4 x 50cm long, black 2 x 100cm long, blue 2 x 100cm long, red 1 x 100cm long, green/yellow 1 x 150cm long, blue 1 x 150cm long, green/yellow 2 x 150cm long, green 4 x 150cm long, brown 4 x 150cm long, black 4 x 150cm long, grey Wire cross section 2.5 mm ² Capacity/category: 600V CAT II, 32A Lucas Nülle GmbH Page 37/55

38 37 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN Resistant to many chemicals and reagents including dilute acids and alkalis Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends Table top with solid impact-resistant protective edging made of 3mm thick RAL 7047 coloured plastic Coating and adhesive are PVC free Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels Space for extension of power supply duct Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes Table frame made of tough combination of rectangular tubing around the full perimeter Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 760 mm 1250 x 1995 x 700 mm (WxHxD) Lucas Nülle GmbH Page 38/55

39 38 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 Shelf for desktop PC made of 1.5mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height Adjustable width ( mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL7047 Lucas Nülle GmbH Page 39/55

40 40 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs ST8010-4T 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 15kg / 33lbs TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range, consisting of: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile 41 Keyboard adapter for flat screen monitor holders ST8010-4G 1 Keyboard adapter for use in combination with flat screen monitor holders Mounted between monitor and mount for flat screen monitor holder Variable 3-level height adjustment via multiple pre-drilled mounting holes Two rows of mounting holes for use with equipment meeting VESA 75 and VESA 100 standards Keyboard shelf inclined by about 30 for comfortable and ergonomic usability Keyboard shelf with 11-mm folded edging to prevent falling, including handle Variable 2-level depth attachment for keyboard shelf (252/276 mm) Extra-wide keyboard shelf (640 mm) can accommodate a mouse as well Depth of keyboard shelf 172 mm Includes two cable clips for guiding and bundling cables Maximum load 10 kg Dimensions (HxWxD) 360 x 640 x 276 mm Lucas Nülle GmbH Page 40/55

41 42 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof EUB 2 Voltage transformers for protective installations Lucas Nülle GmbH Page 41/55

42 EUB 2 Voltage transformers for protective installations Training contents Voltage transformer characteristics Calculation of voltage faults and class of accuracy Effect of loads on the transformation ratio Three-phase voltage transformer in a healthy grid Three-phase voltage transformer in a grid with earth-fault on the primary side Basic equipment set, consisting of: Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 43 Voltage transformer, 3 phase CO3301-4V 1 The three-phase transformer is suitable for use with protection relays and line simulations. The tertiary winding is used for monitoring an earth short-circuit with an earth-fault relay. Input voltage max: 3x 400V/sq.rt. 3 Output voltage max: 3x 100V/sq.rt V/ 3 Power rating: 1VA Vector group: YY0 Fuse protection: all slow-blow Inputs/Outputs: 4mm safety sockets Dimensions: 297 x 228 x 280mm (HxWxD) Weight: 10kg Lucas Nülle GmbH Page 42/55

43 44 Load for voltage transformer CO3301-3V 1 The load is a variable rheostat with series resistor as short-circuit protection. It is suitable for use when recording transformer characteristics to establish the class of accuracy. Rheostat: 1 to 11kohm (smoothly variable) Power rating: 20W Inputs/Outputs: 4mm safety sockets Dimensions: 297 x 114 x 140mm (HxWxD) Weight: 1kg Lucas Nülle GmbH Page 43/55

44 Media: Lucas Nülle GmbH Page 44/55

45 Pos. Product name Bestell-Nr. Anz. 45 Interactive Lab Assistant: Current and voltage converters SO2800-6C 1 The experiment instructions come in the form of an Interactive Lab Assistant course. This multimedia course is a step-by-step guide through the topic of modern energy systems. The fundamentals are conveyed using easy to understand animations. The Interactive Lab Assistant in conjunction with the SCADA Viewer constitutes a comfortable experimenting environment. Special features: Interactive experiment setups Measured values and diagrams can be stored in the experiment instructions per drag and drop The SCADA Viewer can be started directly from the experiment instructions Includes questions with feedback and evaluation logic for progress monitoring Documents can be printed out for hardcopy of experiment instructions including solutions CD-ROM with Labsoft browser, course software and SCADA Viewer Training contents Secondary transformer current as a function of the primary current Effect of the load on current ratio error Checking rated overcurrent factor Transformer circuit in three-wire system Transformer circuit in four-wire system Determining zero residual current Voltage transformer characteristics Calculation of voltage faults and class of accuracy Effect of loads on the transformation ratio Three-phase voltage transformer in a healthy grid Three-phase voltage transformer in a grid with earth fault on the primary side Course duration 4 h approx. Lucas Nülle GmbH Page 45/55

46 Software: Pos. Product name Bestell-Nr. Anz. 46 Software SCADA Viewer SO4001-3H 1 The 'SCADA Viewer' is a software program used for the control and monitoring of power engineering systems. With the software it is possible to display all measured values and operating states inside the system in real time on the existing measuring instruments. Important parameters and signals can be controlled by the software. The measured values and operating states of the equipment can be selected, recorded and plotted over time, evaluated and then exported. Using the 'SCADA Viewer' projects in power engineering are not only made transparent but readable. Software functions: Display of measured values and operating states in real time Plotting of measured values over time in diagrams Processing, analyzing and exporting of diagrams The SCADA viewer contains more than 20 predefined projects Many projects designed with the SCADA designer can be individually expanded at will 47 Patch cable Cat5E 1x 1m yellow, 2x 2m yellow LM x 1m yellow 2x 2m yellow Lucas Nülle GmbH Page 46/55

47 48 USB Network Adapter 10/100 BaseTX RJ45 LM USB-Ethernet adapter provides simple network access without having to install expansion card. The adapter is thus well-suited especially for cases where there are no more slots available in the PC or the housing should not be opened. This adapter is also an alternative for notebooks: instead of a PC card with an Ethernet port the adapter offers a universal connection option for all PCs with USB interface. USB 2.0 high-speed device Downward compatible with USB 1.1 and 1.0 Host controllers Compatible with IEEE 802.3u, 10/100 Base-T and TX Supports both full and half-duplex mode on Ethernet interface Operating systems: Windows ME/200/XP/Vista,7 (32+64 Bit), Linux, Mac OS 10.x 49 5-Port Ethernet Switch LM Port Ethernet Switch 5 RJ45 terminals Power supply Lucas Nülle GmbH Page 47/55

48 Power supply: Pos. Product name Bestell-Nr. Anz. 50 Adjustable 3-phase power supply, 0-450V/2A CO3301-3Z 1 Controllable 3-phase power supply unit /450V for continuous 3-phase supply Power connection: 230/400V, 50/60Hz Output voltage: 3x V, 50/60Hz variable by means of 3- phase regulating transformer (tolerance 0.5%) DC output V Output current: 2.0A 4-mm safety sockets (L1, L2, L3, N, PE, L-, L+) 1 Voltmeter, V (moving iron instrument) 1 Ammeter, 0...3A (moving iron instrument) 3 Phase control lights 1 Measuring point selector switch. L1-N, L2-N, L3-N, L1-L2, L1-L3, L2-L3 1 Measuring point selector switch. I1, I2, I3 Protection: 3 thermo-magnetic device circuit breakers, Motor protection switch adjustable from A with undervoltage trip Table-top housing with fold-away stand Dimensions: 175 x 370 x 260mm (HxWxD) Weight: 15kg 51 Multiple socket outlet, 6 fold, with illuminated switch ST8010-4J 1 Multiple socket outlet, 6 fold, with illuminated switch, 2 pole 6 earth pin sockets acoording to DIN49440, 250V~,16A power cord 1,5m Dimensions: 439 x 60 x 44mm (LxWxH) Lucas Nülle GmbH Page 48/55

49 Measuring instruments: Pos. Product name Bestell-Nr. Anz. 52 Three-phase power quality meter, display and long-term memory CO5127-1S 2 The three-phase measuring instrument permits the measurement and display of relevant power network parameters. It is able to measure single, two-phase or three-phase measurements. The display and operation is carried out by means of menu navigation with an LC display or the integrated Ethernet interface. The optional SCADA software provides for the display of all measurements and allows the implementation and analysis of intelligent networks (smart grids). The smart meter acts as a digital electricity meter where end customers are connected to the grid in order to measure electricity consumption and can be used to turn consumers on or off depending on the circumstances. Three-phase measurement of current and voltage 3x400V/5A Measurement of phase voltages, line-to-line voltages and currents Determination of the apparent, active and reactive power Determination of active, reactive and apparent work Determination of the frequency and distortion factors for current and voltage Detection of harmonic oscillations and neutral conductor current in the electricity supply Pulse measurement Peak and mean value detection Event logging Real-time clock Large-scale, contrast-rich graphic display with background illumination Display in tables, diagrams and vector diagrams 2 Digital inputs and outputs for free configuration including functions Ethernet interface Menu navigation in German/English/ French/Spanish/Italian/Portuguese/Turkish/ Chinese/Russian/Polish Demonstration measuring instrument for making measurements on the electricity supply grid Max. measurement values: Voltage P-P: 690 V Current: 5 A Fault tolerances: Voltage 0.2% Current 0.2% Apparent power 0.5% Active power 0.2% Reactive power 1% Active energy Class 0.2 Reactive energy Class 2 Operating voltage: 110V-230V, 50/60Hz Dimensions: 297 x 228 x 140mm (HxWxD) Weight: 2kg Lucas Nülle GmbH Page 49/55

50 53 Digital/analog multimeter, wattmeter, power-factor incl. software CO5127-1Z 1 The areas of electrical machines, power electronics and drive technology pose particular problems for measuring instruments. In addition to high-performance overload protection, the acquisition of measurement values must be performed accurately independently of the curve's shape. The universal measuring device has been designed particularly to satisfy these requirements. It can simultaneously replace as many as four different measuring instruments constituting a current/voltmeter, power and phaseangle meter all in one. The graphic display allows for both student as well demonstration experiments. The VI Starter software included allows for visualisation of measurements on a PC. Simultaneous, measurement of voltage and current independent of the curve shape (max. 600 V, 20 A) (measurement of clocked voltages) Calculation of active, apparent and reactive power as well as the power factor Measurement of the total rms (RMS-AC+DC), AC rms (RMS- AC) and arithmetic mean (AV-AC+DC) Impervious to electrical damage up to 20 A/600 V Large-scale, high-contrast background-illuminated graphic display (5.7") Large-scale display or display of up to 4 measurement values Digital or pseudo-analog display USB interface Internal resistance: current path 10 mω, voltage path 10 MΩ Voltage ranges: 30, 300, 600 V Current ranges: 1, 10, 20 A Measurement accuracy: 2% Automatic or manual measurement range selection Demonstration test instrument for measuring properties of the electricity supply Operating voltage: 230V, 50/60Hz Dimensions: 297 x 228 x 140mm (HxBxT) Weight: 2kg The VI Starter software allows all the measurements to be displayed on the PC. Up to 17 different displays can be opened. Oscilloscope display of voltage, current and power Consumption meter to display power consumed and output Data logger for 14 different variables Data export for data logger Characteristic recorder Labview driver and supplied examples 32-bit version for Windows Lucas Nülle GmbH Page 50/55

51 54 Multi13S digital multimeter LM Universal precision lab multimeter and temperature meter with IR interface for high-quality, universal measurement and testing in educational settings, power plants, process control installations etc. 3¾-digit multimeter; resolution: ±3,100 digits Measurement classification CATII-1000V Can be connected to UniTrain system via IR interface Voltage and current measuring ranges: 30mV-1000V DC, 3V-1000V AC; 3mA-16A DC; 30mA-10A AC Resistance ranges: 30ohm-30Mohm Special functions: for temperature measurements using PT100/1000 thermocouple (optional accessory) Continuity and diode testing Automatic range selection and battery shut-off, min./max. and data hold function Safety fuse for current measurement range up to 300mA Protection against high currents in the ma range for nominal voltage of 1000V Display with bar chart and backlighting Includes protective sleeve, measuring leads, 1 x spare fuse, 9V battery, calibration certificate Accessories: Pos. Product name Bestell-Nr. Anz. 55 Variable Ohmic load, three-phase, 1kW CO3301-3F 1 Three synchronously adjustable circular rheostats with scale 100-0%, each with a fuse in the sliding-contact connection. for parallel, series, star and delta circuits Resistance: 3 x 750 Ohm Current: 3 x 2 A Inputs/outputs: 4mm safety sockets Dimensions: 297 x 456 x 125mm (HxWxD) Weight: 8kg Lucas Nülle GmbH Page 51/55

52 56 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 40 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour black 57 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 3 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour blue 58 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 2 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour green/yellow Lucas Nülle GmbH Page 52/55

53 59 Set of safety measurement cables, 4mm (31 leads) SO5148-1L 1 Safety measurement cables with 4mm safety plugs, coloured, PVC insulation, highly flexible Each set includes the following: 6 x 25cm long, black 4 x 50cm long, black 2 x 100cm long, blue 2 x 100cm long, red 1 x 100cm long, green/yellow 1 x 150cm long, blue 1 x 150cm long, green/yellow 2 x 150cm long, green 4 x 150cm long, brown 4 x 150cm long, black 4 x 150cm long, grey Wire cross section 2.5 mm ² Capacity/category: 600V CAT II, 32A Lucas Nülle GmbH Page 53/55

54 60 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN Resistant to many chemicals and reagents including dilute acids and alkalis Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends Table top with solid impact-resistant protective edging made of 3mm thick RAL 7047 coloured plastic Coating and adhesive are PVC free Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels Space for extension of power supply duct Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes Table frame made of tough combination of rectangular tubing around the full perimeter Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 760 mm 1250 x 1995 x 700 mm (WxHxD) Lucas Nülle GmbH Page 54/55

55 61 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 Shelf for desktop PC made of 1.5mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height Adjustable width ( mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL7047 Lucas Nülle GmbH Page 55/55

56 63 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs ST8010-4T 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 15kg / 33lbs TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range, consisting of: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile 64 Keyboard adapter for flat screen monitor holders ST8010-4G 1 Keyboard adapter for use in combination with flat screen monitor holders Mounted between monitor and mount for flat screen monitor holder Variable 3-level height adjustment via multiple pre-drilled mounting holes Two rows of mounting holes for use with equipment meeting VESA 75 and VESA 100 standards Keyboard shelf inclined by about 30 for comfortable and ergonomic usability Keyboard shelf with 11-mm folded edging to prevent falling, including handle Variable 2-level depth attachment for keyboard shelf (252/276 mm) Extra-wide keyboard shelf (640 mm) can accommodate a mouse as well Depth of keyboard shelf 172 mm Includes two cable clips for guiding and bundling cables Maximum load 10 kg Dimensions (HxWxD) 360 x 640 x 276 mm Lucas Nülle GmbH Page 56/55