Table of Contents. Lucas Nülle GmbH Page 1/17

Transcription

1 Table of Contents Table of Contents Building management systems Building management systems EIT 10 Smart Homes EIT 10 Smart homes using Z-Wave / ZigBee Lucas Nülle GmbH Page 1/17

2 Building management systems Training systems / trainers for electrical wiring/building management systems: Protective circuitry, protective measures, building mains feed, lighting and intercom systems Industrial wiring, intercoms, alarm systems, hazard alarms and access control KNX/EIB, LON Project work, technical practice, assembly practice systems, planning software Building management systems Building management systems Building management covers all aspects of advanced modern wiring installation. Nowadays, more and more things are being automated. In addition, such matters as energy saving, protection of the environment and safety of course have a key role to play as well. Building management systems of such a kind often consist of programmable bus systems which can be connected together as needed. The training course conveys basic knowledge and some small-scale applications can then be implemented. Lucas Nülle GmbH Page 2/17

3 Lighting management using DALI Lighting management nowadays means more than just flexibility, energy saving and comfort. DALI stands for Digital Addressable Lighting Interface and is a protocol for digital communication between electronic lighting controls and appliances (electronic ballast units, transformers etc.). The new comprehensive system, consisting of a controller, sensor, extender and buttons, is characterised by the option of programming with or without computers or an overarching bus system. Configuration of the buscontrolled lighting system can be handled entirely by means of the display integrated into the controller with the help of a push-button rotary switch. Light management covers all areas of public life, including the following: Living room and building lighting Special effects lighting Industrial and street lighting Emergency and escape route lighting Lucas Nülle GmbH Page 3/17

4 EIT 10 Smart Homes EIT 10 Smart Homes This set is intended for investigating the fundamentals of a radio-controlled smart-home automation system. The core of a smart home is a central radio interface which can simply be plugged into any electricity socket. This interface can then be used to program all the appliances used in the home. For every smart home, the following options are available: Switching lights, heating and electrical appliances on and off via radio-controlled switches Automatic heating control via time switch or thermostat Full-scale monitoring involving smoke detectors, motion sensors and door contacts Automatic activation of lights when entering the home Switching lights and appliances on and off by remote control from up to 100 m away Switching any appliances on or off while away from home via smart phones, tablet computers or PCs Use of an app to check on current consumption of electricity Lucas Nülle GmbH Page 4/17

5 EIT 10 Smart homes using Z-Wave / ZigBee EIT 10 Smart homes using Z-Wave / ZigBee This set represents a radio-controlled smart-home system. This is a centralised system which requires internet access. It can be operated via tablet computer or smart phone. All essential building functions can be implemented, such as: Lighting control Heating control Control of blinds Monitoring of windows and doors Smoke detection Remote alarms via SMS Energy consumption monitoring, smart metering The system can be extended using any conventional Z-Wave components. Lucas Nülle GmbH Page 5/17

6 Basic equipment set, consisting of: Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 1 SMART HOME: central control unit, Z-Wave + ZigBee, expandable CO3109-7E 1 The Z-Wave central control unit handles communication between devices and provides memory for recording data and events. It has been extended with a variety of ports to allow communication with many other smart home systems. This module has additional ports to facilitate further extension at a later date. By means of a connection to the cloud, the control unit automatically establishes communication with all connected devices so that they can be controlled by users with the help of tablet computers, smart phones, full-size computers or television sets located on site or from remote locations. Connection to the internet is required for this. The Zipabox gateway supports a host of communications standards including Z-Wave, ZigBee, KNX, ONVIF, enocean and UPnP. The intuitive graphic user interface makes it possible for users to define their own rules even if they have no previous programming experience. Applications for which parameters may be configured: Security Lighting Air conditioning Heating Video monitoring Sun-shading Energy measurement Technical data: Operating voltage: V DC Power supply: Plug-in power supply, V AC 50/60 Hz 2 Programmable buttons 2 Programmable green LEDs 1 Programmable RGB LEDs Indicator lights: Status, Ethernet, WiFi & Z-Wave Dimensions: 297x228x160 mm Weight: 1.2 kg Lucas Nülle GmbH Page 6/17

7 2 Smart Home: RGB, lighting control with motion detector, Z-Wave CO3109-7A 1 This board represents an introduction to smart home systems and forms the core of such a system. The key focus is on the registration of various components and their connection to the internet, allowing them to be operated via tablet computer or smart phone. The following skills are imparted: Activation and registration of central interface Connection to tablet computer or smart phone (tablet/smart phone not included) Familiarisation with various components Creation of rules and scenarios Components: 1 Z-Wave radio interface 1 Z-Wave multi-circuit switch 2 Schuko-type sockets 1 Z-Wave switching and measurement socket 1 Z-Wave motion sensor 1 Z-Wave actuator switch for embedding in plaster 1 Radio remote control unit with 4 buttons Network cable, 50 cm Technical data: Operating voltage: 230 V/AC, 50 Hz Range: max. 300 m (depending on location) Protocol: Z-Wave (radio) Inputs and outputs: 4-mm safety sockets Dimensions: 297x456x160 mm Weight: 4.0 kg Lucas Nülle GmbH Page 7/17

8 3 Smart Home, heating controller with various sensors, Z-Wave CO3109-7B 1 This board represents a heating control system for a smart home which responds to various operating conditions. The way that the heating thermostats can respond to various influences can be emulated and visualised. The following skills are imparted: Activation and registration of heating components Setting up fault notifications via Control of heating via window contacts or thermostats Creation of rules and scenarios Components: 2 Z-Wave heating thermostats 1 Z-Wave room thermostat 1 Z-Wave door and window contact 2 Radiator valves, cut-away 4 LEDs indicating cold/warm status 1 Moving window simulation Technical data: Operating voltage: 230 V/AC, 50 Hz Range: max. 300 m (depending on location) Protocol: Z-Wave (radio) Inputs and outputs: 4-mm safety sockets Dimensions: 297x456x160 mm Weight: 3.0 kg Lucas Nülle GmbH Page 8/17

9 4 SMART HOME: lighting and blinds controller, Z-Wave CO3109-7D 1 This board is for setting parameters of lighting and blind installations in a smart home system. The key focus is on the registration of various components and their connection to the internet, allowing them to be operated via tablet computer or smart phone. The following skills are imparted: Activation and registration of wall-embedded and surface mounted components Control of blinds Familiarisation with various components Creation of rules and scenarios Components: 1 Z-Wave multi-circuit switch 1 Schuko-type socket 1 Z-Wave switching and measurement socket 1 Z-Wave motion sensor with brightness and temperature measurement functions 1 Z-Wave actuator switch for embedding in plaster 1 Z-Wave blinds actuator for embedding in plaster 1 Blinds simulation with multi-coloured LEDs 3 Switchable LED lamps Technical data: Operating voltage: 230 V/AC, 50 Hz Range: max. 300 m (depending on location) Protocol: Z-Wave (radio) Inputs and outputs: 4-mm safety sockets Dimensions: 297x456x160 mm Weight: 3.0 kg Lucas Nülle GmbH Page 9/17

10 5 Smart home: hazard alarm with presence detection, Z-Wave CO3109-7C 1 This board represents part of a hazard warning system for a home automation system which responds to various operating conditions. The way that the alarm systems can be triggered and can respond to various influences can be emulated and visualised. The key focus is on how notifications can be transmitted to various devices. The following skills are imparted: Activation and registration of sensors and contacts Configuration of alarm notifications via Notifications from window contacts or smoke detectors Creation of rules and scenarios Components: 1 Z-Wave smoke detectors 1 Z-Wave motion sensors 2 Z-Wave door and window contacts 2 Moving window simulations Technical data: Operating voltage: 230 V/AC, 50 Hz Range: max. 300 m (depending on location) Protocol: Z-Wave (radio) Inputs and outputs: 4-mm safety sockets Dimensions: 297x456x160 mm Weight: 2.5 kg Lucas Nülle GmbH Page 10/17

11 OPTIONAL: Pos. Product name Bestell-Nr. Anz. 6 SMART HOME: Controller with touch display, Z-Wave + ZigBee (EU) CO3109-7G 1 ZipaTile with Z-wave and Zigbee is the complete home control in the form of a single device. It can be easily mounted on any wall, in any house. With a large number of built-in sensors and hardware modules, ZipaTile will replace many home devices such as security system, thermostat, automation controller, IP camera, alarm siren or intercom and combine everything in a single, intelligent and beautiful device. The central unit speaks automatically to all connected devices via a cloud connection so that the user can control it locally or remotely with the help of tablets, smartphones or computers. However, this requires an Internet connection. The Zipatile Controller supports a variety of communication standards including Z-Wave, ZigBee, KNX, and IP. The intuitive graphical user interface allows you to program your own rules without prior programming experience. Technical data: Z-Wave Plus + ZigBee Gateway touch panel safety system SmartHome intercom heat governor wall panel IP Camera Motion and brightness sensor Operating temperature: 0 ~ +40 C Humidity: 5 ~ 95% RH Input: VAC, 50/60 Hz, 035A Output: 5V DC 2000 ma WLAN b/g/n Bluetooth 4.0 Z-Wave Plus (frequency: 868 MHz) ZigBee (frequency: 2.4 GHz) Lucas Nülle GmbH Page 11/17

12 Media: Pos. Product name Bestell-Nr. Anz. 7 Interactive Lab Assistant: Smart Home Compact SO2801-3P 1 The training program runs on a pre-prepared browser for control, management and display of program content and virtual instruments. Comprehensive assessment of learning accomplishments for individual students needs to be available. Assessment on the basis of test questions included in the course. This course shows how to set up a smart home system using Z-Wave components Contents: You will learn about the fundamental principles of smart homes You will become familiar with various radio systems You will learn the Z-Wave standard You take a structured approach to project work and learn how to apply this method in future as well You get to know the various possibilities a smart home system opens up You will learn how to set a smart home network, to configure parameters and put it into operation Structure of a smart home Basic programming with Z-Wave Programming a Z-Wave controller Putting a controller into operation Lighting control project Roller blind control project Heating control project Security and alarms project Lucas Nülle GmbH Page 12/17

13 Power supply: Pos. Product name Bestell-Nr. Anz. 8 Single-phase power supply with switch, circuit breaker and earthcontact socket CO3211-1A 1 Power supply 230 V/16 A Automatic circuit breaker 16 A Main switch Earth-contact socket Output: 4-mm safety sockets Dimensions: 297 x 228 x 155 mm. (HxWxD) Weight: 0.8 kg Accessories: Pos. Product name Bestell-Nr. Anz. 9 Router with DSL modem and WLAN access point CO3538-1R 1 Lucas Nülle GmbH Page 13/17

14 10 SMART HOME: Z-Wave KNX interface CO3109-7F 1 This extension enables communication between a radio-controlled smart home system and a bus-based KNX system. The interface is programmed from the KNX end using ETS software. It is connected mechanically via a plug contact to the smart home control unit. Programming can begin as soon as the connection is made. Technical data Operating voltage: supplied from Z-Wave control unit KNX bus voltage: supplied via KNX line voltage supply Communication: bi-directional with status indication Devices: max. 250 KNX devices can be connected Indicator: LED for KNX communication 11 Set of measurement leads and jumpers, 2/4-mm, for Smart Home SO5148-1W 1 Set of safety measurement leads and jumpers with stackable 2-mm and 4-mm laminate plugs and highly flexible, double-insulated leads, consisting of: Leads, 4-mm: Leads, 2-mm: 5 x 25 cm long, brown, 4-mm 3 x 25 cm long, blue, 4-mm 4 x 25 cm long, black, 4-mm 1 x 50 cm long, brown, 4-mm 1 x 50 cm long, blue, 4-mm 1 x 50 cm long, green/yellow, 4-mm 4 x 30 cm long, black, 2-mm 4 x 3 cm long, black, 2-mm Connection plugs (jumpers): 3 x black, 4/19-mm 4 x blue, 4/19-mm 4 x brown, 4/19-mm 4 x green/yellow, 4/19-mm Technical data Cross-section of 4-mm leads 2.5 mm2 Cross-section of 2-mm leads 0.5 mm2 Nominal data for 4-mm leads: 600 V, CAT II, 32 A Nominal data for 2-mm leads: 600 V, CAT II, 10 A Lucas Nülle GmbH Page 14/17

15 12 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN Resistant to many chemicals and reagents including dilute acids and alkalis Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends Table top with solid impact-resistant protective edging made of 3mm thick RAL 7047 coloured plastic Coating and adhesive are PVC free Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels Space for extension of power supply duct Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes Table frame made of tough combination of rectangular tubing around the full perimeter Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 760 mm 1250 x 1995 x 700 mm (WxHxD) Lucas Nülle GmbH Page 15/17

16 13 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5F 1 Shelf for desktop PC made of 2mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height for slim PCs, adjustable width (60-160mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL 7047 Lucas Nülle GmbH Page 16/17

17 15 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 10kg/22lb TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range The set consists of the following: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile Includes assembly instructions 16 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 17/17