Table of Contents. Lucas Nülle GmbH Page 1/29

Transcription

1 Table of Contents Table of Contents Building management systems Building management systems EIT 8 Wiring installation using Instabus KNX EIT 8.1 Lighting and blind/shutter control using KNX/EIB EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX EIT 8.3 Smart homes using existing bus systems Lucas Nülle GmbH Page 1/29

2 Building management systems Training systems / trainers for electrical wiring/building management systems: Protective circuitry, protective measures, building mains feed, lighting and intercom systems Industrial wiring, intercoms, alarm systems, hazard alarms and access control KNX/EIB, LON Project work, technical practice, assembly practice systems, planning software Building management systems Building management systems Building management covers all aspects of advanced modern wiring installation. Nowadays, more and more things are being automated. In addition, such matters as energy saving, protection of the environment and safety of course have a key role to play as well. Building management systems of such a kind often consist of programmable bus systems which can be connected together as needed. The training course conveys basic knowledge and some small-scale applications can then be implemented. Lucas Nülle GmbH Page 2/29

3 Lighting management using DALI Lighting management nowadays means more than just flexibility, energy saving and comfort. DALI stands for Digital Addressable Lighting Interface and is a protocol for digital communication between electronic lighting controls and appliances (electronic ballast units, transformers etc.). The new comprehensive system, consisting of a controller, sensor, extender and buttons, is characterised by the option of programming with or without computers or an overarching bus system. Configuration of the buscontrolled lighting system can be handled entirely by means of the display integrated into the controller with the help of a push-button rotary switch. Light management covers all areas of public life, including the following: Living room and building lighting Special effects lighting Industrial and street lighting Emergency and escape route lighting Lucas Nülle GmbH Page 3/29

4 EIT 8 W iring installation using Instabus KNX EIT 8 Wiring installation using Instabus KNX The demands on electrical wiring in buildings continue to grow in step with the latest developments in technology. The modern electrician must come to terms with this development. The following topics build on conventional wiring installation and indicate a new way of assembling building management systems. In addition to the standard wiring network a bus system is required in order for the individual terminal devices to communicate. All terminal devices have intelligent software and are programmed with a PC. This is a decentralised system in which the PC is used exclusively for programming. Fundamentals of an KNX installation bus Preparation and installation of an KNX project Programming on-off functionality to demonstrate how programming of devices is accomplished Programming an intermediate (two-way) circuit Including conventional switches in an KNX project Programming centralised functionality Switching and dimming lights Control of blinds and curtains Lucas Nülle GmbH Page 4/29

5 EIT 8.1 Lighting and blind/shutter control using KNX/EIB EIT 8.1 Lighting and blind/shutter control using KNX/EIB Training contents: Fundamentals of an EIB installation bus Preparation and installation of an EIB project Programming on-off functionality to demonstrate how programming of devices is accomplished Programming an intermediate circuit Including conventional switches in an EIB project Programming centralised functionality Switching and dimming lights Control of blinds and curtains Lucas Nülle GmbH Page 5/29

6 Basic equipment set, consisting of: Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 1 EIB compact lighting and roller blind control board, basic equipment CO3209-9A 1 The panel provides a basic unit for any subsequent KNX/EIB experiment sets. The panel accommodates the conduct of a comprehensive range of experiments on lighting control, dimming and control of blinds. It includes the following components: EIB power supply with choke EIB-USB interface EIB dimmer unit EIB control chip for controlling multiple dimmers EIB 8-way actuator switch EIB 4-way actuator for blinds EIB 4-way push button EIB 2-way push button EIB 2-way button interface Conventional multi-circuit switches Mains switch, illuminated Phase indicator light, red Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 3.2kg Lucas Nülle GmbH Page 6/29

7 2 EIB room simulation with various overlay masks CO3209-9J 1 The panel is designed for project-oriented display of applications for various KNX/EIB projects. It can be used purely for room simulation or as a central monitor display. The various overlays mean the board can be used for a wide variety of projects. This flexibility can be enhanced by means of additional project-based overlays. Technical data 4 Overlay masks for room simulation 4 Blinds, two of which can be used as curtains 12 Lamps, 230V, dimmable Lamps can also be used for visualisation of heating simulation Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 1.5kg Lucas Nülle GmbH Page 7/29

8 Media: Pos. Product name Bestell-Nr. Anz. 3 Interactive Lab Assistant: Basic course in building automation using KNX SO2801-3K 1 The Basic course in building automation using KNX utilises a project called "Renovation of an old building using KNX" to teach basic skills for defining a KNX system, constructing it, configuring it, setting its parameters and putting it into operation. Training contents: Installation and use of ETS application software Fundamentals of KNX (bus system, transmission media, topology, bus devices, physical addresses, group addresses, circuit symbols) Standard lighting Timer functions Centralised function Use of existing appliances Dimmers Blinds Diagnostics Documentation Course duration: 12h The multimedia experiment software with virtual instruments, instructions and documentation of results on the topic of "Building automation using KNX (fundamentals)" included: Interactive experiment set-ups Questions with feedback and evaluation software for monitoring student progress Printable document to allow easy printing of experiment instructions with solutions Available in German, English, French, Spanish, other languages available on request CD-ROM with Labsoft-Browser, course software and supplementary software for external measuring instruments Lucas Nülle GmbH Page 8/29

9 Accessories: Pos. Product name Bestell-Nr. Anz. 4 Safety measurement cable (4mm), 25cm/10", black SO5126-8B 13 Safety measurement lead with stackable, contact-proof 4mm plugs colour: black length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A 5 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 1 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour blue 6 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 1 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour green/yellow Lucas Nülle GmbH Page 9/29

10 7 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 2 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour black 8 2mm safety measurement cable, 3cm, black SO5126-7X 4 Plugs: 2mm Length: 3cm Colour: black Load capacity: 10A 9 USB cable A-B LM USB cable Lucas Nülle GmbH Page 10/29

11 10 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN Resistant to many chemicals and reagents including dilute acids and alkalis Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends Table top with solid impact-resistant protective edging made of 3mm thick RAL 7047 coloured plastic Coating and adhesive are PVC free Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels Space for extension of power supply duct Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes Table frame made of tough combination of rectangular tubing around the full perimeter Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 760 mm 1250 x 1995 x 700 mm (WxHxD) Lucas Nülle GmbH Page 11/29

12 11 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 Shelf for desktop PC made of 1.5mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height Adjustable width ( mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL 7047 Lucas Nülle GmbH Page 12/29

13 13 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 10kg/22lb TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range The set consists of the following: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile Includes assembly instructions 14 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 13/29

14 Software: Pos. Product name Bestell-Nr. Anz. 15 ETS 4 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 ETS4 is the latest ETS generation, directly following on from the ETS3 release. Very many improvements have been made in ETS4 compared to ETS3. Caution: limited to no more than 20 products (sufficient for educational needs) Support for all common 32-bit and 64-bit Windows operating systems Uses the latest Windows 2008 Server components for the ETS4 database Multi-monitor support (PC screens) Automatic software updates Import of KNX project/product data Switching between various KNX elements such as objects and group addresses plus search capability Separate tree and list searches Integrated KNX device parameter dialog in ETS4 interface. Single-click walk-through option for all parameter dialogs Separate administration of KNX bus interfaces for KNX monitors and ETS4 You can define your own dynamic views (e.g. devices with specific names or addresses) Group addresses may be structured as desired, even with more than three levels Uses complete 16-bit address space for group addresses Project wizard for rapid drafting of building structures Automatic software updates in background Online project diagnostics for analysing wiring errors Flexible KNX bus/group monitor with controllable display options plus new filters and trigger conditions Display of bus load EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX Lucas Nülle GmbH Page 14/29

15 EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX With special applications acquired during basic course knowledge is further deepened and expanded. Monitoring system Training contents: Heating control Training contents: Room monitoring Using the info displays Evaluation of reports KNX - Triton - button 3 - fold with display KNX - motion and presence detector KNX - button - Interface Window, door and bolt switch contacts Heating control for room temperature Heating control with frost protection setting How room temperature control reacts to disturbance variables Automatic summer/winter adaptation Presence control Weather station Training contents: Detecting weather conditions via sensors Power supply to sensors Processing analogue readings using KNX/EIB Processing and display of analogue signals Wide-area coverage Training contents: Extending a bus system using a single-line topology to one using wide-area topology Additional power supply for various areas and bus lines Adding extra devices Adding extra USB ports Operation and visualisation Training contents: Setting up a touch panel for operation Programming a touch-panel Graphic display on a touch-panel Lucas Nülle GmbH Page 15/29

16 Supplement to basic set, consisting of: Supplement to basic set, consisting of: Pos. Product name Bestell-Nr. Anz. 16 EIB monitoring system with presence monitoring and alarm contacts CO3209-9B 1 The monitoring system panel provides all the key components for room monitoring. Messages are indicated on an information display unit for evaluation of individual signals and states. The panel includes the following components: EIB 3-way Triton push button with display EIB 170 motion sensor EIB 360 proximity sensor EIB button interface Window contact Door contact Broken glass (glass-break) sensor Bolt switch contact Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 2.5kg Lucas Nülle GmbH Page 16/29

17 17 EIB heating control system with temp. display, disturbance feed control CO3209-9C 1 The monitoring system panel provides all the key components for controlling temperature as well as disturbance feed control. Room temperature can be set within a range of C. The panel includes the following components: EIB 3-way Triton push button with temperature sensor and display EIB binary output for controlling various valves EIB 4-way button interface Window contact Day/night switch-over Frost protection simulation Extra contact for disturbance feed control RT room temperature controller Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 2.2kg Lucas Nülle GmbH Page 17/29

18 18 EIB 4-channel weather station sim., rainfall, wind, temp. and sunlight sensors CO3209-9D 1 The weather station panel is designed for training in the processing of analogue inputs using a KNX/EIB system. All the key signals and power supply voltages are accessible. The panel includes the following components: EIB 2-way power supply, 230/24V AC, 1A EIB 4-channel weather-station Luminance sensor ( lux) Rainfall sensor External temperature sensor ( C) Wind speed sensor ( m/s) Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Signal voltages: 0...1V, 0...5V, 0..10V, Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 2.2kg Lucas Nülle GmbH Page 18/29

19 19 EIB bus extension with line and range couplers, 4 extra bus devices CO3209-9E 1 The bus extension panel can be used to build various bus topologies. It concentrates on transmission of information to various areas or lines. The flexibility of KNX/EIB is very nicely demonstrated by these exercises. The panel includes the following components: EIB 640mA power supply with choke EIB choke EIB line/area coupler (x2) EIB USB interface EIB 3-way Triton button unit EIB single Triton button Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 3.2kg Lucas Nülle GmbH Page 19/29

20 20 EIB visualisation using touch panel, internal temp. sensor CO3209-9F 1 This panel is for operation, monitoring and visualisation of EIB states and signals. Up to 80 standard functions (switching, dimming, control, measurement display etc.) can be reproduced. The equipment has a simple menu control system. The touch panels can be labelled as the user wishes. The touch panel can also be used as a monitor panel with acoustic feedback. The panel includes the following components: EIB room panel (touch display) Panel touch pen MMC/SD card reader Single room temperature controller IR receiver Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Display resolution: 320x240 pixels Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 1.8kg Accessories: Pos. Product name Bestell-Nr. Anz. 21 2mm safety measurement cable, 60cm, black SO5126-7R 3 Plugs: 2mm Length: 60cm Colour: black Current capcity: 10A Lucas Nülle GmbH Page 20/29

21 22 2mm safety measurement cable, 60cm, red SO5126-7P 3 Plugs: 2mm Length: 60cm Colour: red Load capacity: 10A 23 2mm safety measurement cable, 30cm, red SO5126-7H 6 Stecker: 2mm Länge: 30cm Farbe: rot Belastbarkeit: 10A 24 2mm safety measurement cable, 30cm, black SO5126-7K 6 Stecker: 2mm Länge: 30cm Farbe: schwarz Belastbarkeit: 10A 25 2mm safety measurement cable, 3cm, black SO5126-7X 16 Plugs: 2mm Length: 3cm Colour: black Load capacity: 10A Lucas Nülle GmbH Page 21/29

22 26 Safety measurement cable (4mm), 50cm, black SO5126-8L 4 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: black Length: 50 cm Wire cross section 2.5 mm 2 27 Safety measurement cable (4mm), 50cm, brown SO5126-8N 3 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: brown Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A 28 Safety measurement cable (4mm), 50cm/20", blue SO5126-8P 3 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: blue Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A Lucas Nülle GmbH Page 22/29

23 29 Safety measurement cable (4mm), 50cm, green/yellow SO5126-8R 3 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: green/yellow Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A 30 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 5 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour blue 31 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 5 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour green/yellow 32 Safety connecting plug 4mm with tap (2x), brown, 1000V/32A CAT II SO5126-3S 5 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour brown Lucas Nülle GmbH Page 23/29

24 33 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 1 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour black Lucas Nülle GmbH Page 24/29

25 Media: Pos. Product name Bestell-Nr. Anz. 34 Manual EIT 8, EIB/KNX building management systems SH5001-1H 1 High-quality, bound, colour teachers manual with rigid spine, including solutions. CD-ROM with additional students manual, including exercises and worksheets. Details: Theoretical background Colour CAD drawings for experiment set-ups and circuits Exercises and worksheets Printed on high-quality 100-g/m² colour copy paper, book cover on 210-g/m² glossy paper Training contents: Installing and running ETS Project 1: Setting up a KNX/EIB installation Project 2: Adding multi-circuit switches to a KNX/EIB system Project 3: Adding centralised functions and dimmers to a KNX/EIB system Project 4: Adding blinds to a KNX/EIB system Project 5: Adding heating to a KNX/EIB system Project 6: Adding monitoring and security functions to a KNX/EIB system Project 7: Adding a weather station to a KNX/EIB system Project 8: Adding couplers to a KNX/EIB system Project 9: Adding a room panel to a KNX/EIB installation Lucas Nülle GmbH Page 25/29

26 Software: Pos. Product name Bestell-Nr. Anz. 35 ETS 4 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 ETS4 is the latest ETS generation, directly following on from the ETS3 release. Very many improvements have been made in ETS4 compared to ETS3. Caution: limited to no more than 20 products (sufficient for educational needs) Support for all common 32-bit and 64-bit Windows operating systems Uses the latest Windows 2008 Server components for the ETS4 database Multi-monitor support (PC screens) Automatic software updates Import of KNX project/product data Switching between various KNX elements such as objects and group addresses plus search capability Separate tree and list searches Integrated KNX device parameter dialog in ETS4 interface. Single-click walk-through option for all parameter dialogs Separate administration of KNX bus interfaces for KNX monitors and ETS4 You can define your own dynamic views (e.g. devices with specific names or addresses) Group addresses may be structured as desired, even with more than three levels Uses complete 16-bit address space for group addresses Project wizard for rapid drafting of building structures Automatic software updates in background Online project diagnostics for analysing wiring errors Flexible KNX bus/group monitor with controllable display options plus new filters and trigger conditions Display of bus load Lucas Nülle GmbH Page 26/29

27 EIT 8.3 Smart homes using existing bus systems EIT 8.3 Smart homes using existing bus systems This set requires a minimum installation of KNX, DALI and EnOcean components. These components can also be found in the sets EIT8 - KNX or EIT3 Energy-efficient lighting using DALI/EnOcean. Parameters for the smart home interface are set via ETS and i-bus. Lucas Nülle GmbH Page 27/29

28 Supplement to basic set, consisting of: Supplement to basic set, consisting of: Pos. Product name Bestell-Nr. Anz. 36 Interface board for setting up a smart home system CO3209-9Z 1 The interface board supplements existing bus systems. It acts as a central communications facility for various bus systems. It can be used to exchange data between KNX, DALI and EnOcean buses. At the same time, it also offers access for setting KNX parameters via Ethernet. Functions: Fault notifications and visualisation capabilities for entire lighting installations 14 Lighting scenarios which can be controlled and saved via KNX Power-on level subject to modifiable parameters: It is possible to program the brightness levels with which lights should activate once operating power is restored to their ballast units Sequential control: Up to 10 scenarios can be configured in sequence, which can repeat from 1 to 254 times or be repeated indefinitely Correction of characteristics: The DALI characteristic can be made linear and KNX control signals can be set to trigger at higher levels. Switching, dimming, setting of brightness levels Stairway lighting function Slave function for integration into constant lighting level control systems Seasoning function: e.g. for dimmable fluorescent lamps Technical data: Operating voltage: V AC, 50/60 Hz, V DC Supply voltage for IP gateway: Vs V DC via internal plug terminal Test button for testing DALI outputs Red LED and KNX button for assigning physical addresses Green LED indicating operational readiness Yellow LED for indicating DALI faults, constant lighting function Test-mode indicator, slow flashing Initialisation indicator, fast flashing LED indicator (internal) 1 x KNX programming indicator LCD display (internal) 2x8 characters Positive STN (LCD) display (yellow and green) KNX programming button 2 Buttons for control of LCD Button for deleting EnOcean appliances Teach-in/Learn button for EnOcean appliances Inputs and outputs: 2-mm/4-mm safety sockets Dimensions: 297 x 224 x 80 mm Weight: 1.8 kg Lucas Nülle GmbH Page 28/29

29 Software: Pos. Product name Bestell-Nr. Anz. 37 ETS 4 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 ETS4 is the latest ETS generation, directly following on from the ETS3 release. Very many improvements have been made in ETS4 compared to ETS3. Caution: limited to no more than 20 products (sufficient for educational needs) Support for all common 32-bit and 64-bit Windows operating systems Uses the latest Windows 2008 Server components for the ETS4 database Multi-monitor support (PC screens) Automatic software updates Import of KNX project/product data Switching between various KNX elements such as objects and group addresses plus search capability Separate tree and list searches Integrated KNX device parameter dialog in ETS4 interface. Single-click walk-through option for all parameter dialogs Separate administration of KNX bus interfaces for KNX monitors and ETS4 You can define your own dynamic views (e.g. devices with specific names or addresses) Group addresses may be structured as desired, even with more than three levels Uses complete 16-bit address space for group addresses Project wizard for rapid drafting of building structures Automatic software updates in background Online project diagnostics for analysing wiring errors Flexible KNX bus/group monitor with controllable display options plus new filters and trigger conditions Display of bus load Lucas Nülle GmbH Page 29/29