Opto Proximity Switches

Transcription

1 K80 form Overview Cubic molded plastic enclosure,, connection using M1 connector or Pg 11 cable gland Versions for use in potentially explosive environments acc. to 94/9/EG (ATEX exists): Zone (gases, vapors, mist) according to classification II 3G Zone (dust atmosphere, non-conductive dust) according to classification II 3D Diffuse (energetic ) Sensing range m (adjustable using potentiometer) Diffuse with background suppression Sensing range 0. to 1 m (adjustable using potentiometer) Retroreflective Sensing range 6 m (adjustable using potentiometer) Supplied without reflector "Advanced" version 1 to 1 m Thru-beam Sensing range m (adjustable using potentiometer) Rated operating voltage 4 V DC or 40 V AC/DC Inputs and outputs Electronics output pnp or npn programmable as light-on or dark-on light-on, dark- Relay output 0 V to 30 V AC/DC Timing function (delayed pick-up or drop-out, pulse shaping) Enabling input for test purposes Supplied without mounting material Technical specifications Operating mode Diffuse Diffuse with background suppression Sensing range m (adjustable) 0,... 1 (adjustable) Standard target mm (white) (white) Operating voltage range (DC) V No-load current I 0, max. ma Operating voltage range (AC/DC) V No-load power, max. VA Rated operational current I e ma (at 40 V AC) Switching frequency, max. Hz Switching time, max. ms Wavelength (illuminant) nm 880 (IR) 880 (IR) Switching state/surplus light function LED yellow/led green display Formstoff (PBTP) Approval for Ex Zones / no no yes no Ambient temperature C Temperature coefficient %/K 0.3 Type 3RG , 3RG RG7 10-6MC00 3RG7 00-3CC00-0XB4 3RG , 3RG Operating mode Retroreflective with polarization filter Thru-beam Sensing range m 6/1 (adjustable) (adjustable) Reflector mm Reflector type D 84 Operating voltage range (DC) V No-load current I 0, max. ma Operating voltage range (AC/DC) V No-load power, max. VA Rated operational current I e ma (at 40 V AC)) (at 40 V AC) Switching frequency, max. Hz Switching time, max. ms Wavelength (illuminant) nm 660 (red, polarized) 880 (IR) Switching state/surplus light function LED yellow/led green display Molded plastic (PBTP) Approval for Ex Zones / no no yes no no yes Ambient temperature C Temperature coefficient %/K 0.3 Type 3RG , 3RG , 3RG , 3RG RG7 11-6MC00, 3RG7 11-6MC61 3RG7 01-3CC..- 0XB4 3RG , 3RG RG7 1-6MC00, 3RG7 0-6FG RG XB4, 3RG XB4 Siemens FS /111

2 K80 form K80 form Operating mode Thru-beam Thru-beam Emitter Sensing range m (adjustable via potentiometer) (adjustable via potentiometer) Illuminant nm Wiring Switching output Ckt. diag. 880 (IR) M1 plug, Pg 11, 4-pole Pg 11, with enabling input, 5-pole Pg 11, 5-pole 880 (IR) M1 plug, Pg 11, 3-pole Pg 11, 3-pole Light-On or Dark-On and surplus light, with timing function ( s) Light-On or Dark-On and surplus light, with timing function ( s) Relay, light-on and dark-on, with timing function ( s) Emitter DC with enabling input Emitter DC with enabling input Emitter AC/DC with enabling input pnp 5 3RG7 0 3CC00 npn 5 3RG7 0 3HC00 pnp 6 3RG7 1 3DK00 pnp 11 3RG7 0 6CC00 npn 11 3RG7 0 6HC00 pnp 11 3RG7 1 6DK00 npn 11 3RG7 1 6EK RG7 1 6MC00 7 3RG7 0 3BG RG7 0 6BG RG7 0 6FG00 Operating mode K80 ATEX form Diffuse Retroreflective Thru-beam Sensing range m (can be set with potentiometer) 6 (can be set with potentiometer) 1 (can be set with potentiometer) (can be set with potentiometer) Illuminant nm 880 (IR) M1 plug, 660 (red, polarized) 660 (red, polarized) Wiring Switching output Ckt. diag. M1 plug, M1 plug, 880 (IR) M1 plug, Light-On or Dark-On and surplus light, with timing function ( s) Sender with enable input Communication-capable proximity switches with K80 IQ-Sense form Accessories Diffuse Diffuse with background suppression Retroreflective 880 (IR) M1 plug, (IR) M1 plug, (red, polarized) M1 plug, for connection to the 4IQ-Sense module for connection to the 4IQ-Sense module for connection to the 4IQ-Sense module pnp 5 3RG7 00 3CC00-0XB4 pnp 5 3RG7 01 3CC00-0XB4 pnp 5 3RG7 01 3CC61-0XB4 pnp 5 3RG7 0 3CC00-0XB4 pnp 6 3RG7 1 3DK00-0XB4 7 3RG7 0 3BG00-0XB4 9 3SF7 10 3JQ00 9 3SF7 14 3JQ00 9 3SF7 11 3JQ00 Mounting bracket for form K80 3RX7 303 Siemens FS /113

3 K80 form Dimensions 3RG RG XB4 65 Pot. + LEDs , M 1x1 36 NSD b 13, 5 3RG Pot. + LEDs , PG NSD b 5 /114 Siemens FS

4 L80 HF form Overview Cubic molded plastic enclosure,, wired with M1 connector Visible laser light (red), laser protection class as per EN Diffuse with analog output, configurable using teach-in keys Resolution < 0.1 % of sensing range upper limit Technical specifications Operating mode Laser diffuse with analog output Two digital channels, adjustable as switching outputs or 1 switching output and 1 trigger input Rated operating voltage 4 V DC Solid-state inputs or outputs pnp Analog output 4 to 0 ma (adjustable normalization) Supplied without mounting accessories Sensing range mm... 7 Resolution %/MBE < 0.1 Linearity %/MBE < 0.5 Light spot diameter mm x 4.5 (at end of sensing range) Operating voltage range (DC) V No-load supply current I 0, max. ma 40 Analog output ma Output current per switching output ma 100 Recommended load W 0 Switching frequency Hz 1000 Switching time ms < 1 Wavelength (illuminant) nm 6 Indicators Ready for operation Status display Red LED Switching state, input/output Yellow LED ( x) Status display, trigger input Object valid Timer function active Measured value centering active PBT Ambient temperature C Temperature coefficient %/K 0.0 Wiring M1 plug, 8-pole, type O Type 3RG7 56 3NQ00 Siemens FS /115

5 L80 HF form Selection and Ordering data Operating mode Laser diffuse with analog output Sensing range Illuminant Wiring Analog output mm nm ma (red laser light) M1 plug, 8-pole, type O Ckt. diag pnp 0 A 3RG7 56 3NQ00 Operating mode L80 HF Accessories A: Subject to export regulations: AL = N and ECCN = EAR99H Dimensions 3RG7 56 3NQ00 65 Pot. + LEDs Mounting bracket for form L80 HF 3RX7 303 Cable plug, shielded, mm A 3RX CB81-1GF , NSD b , M 1x /116 Siemens FS

6 SIMATIC PXO6 L90L Overview Measuring laser based on the principle of optical running-time measurement Measuring laser with IR light; laser class 1 Pilot laser for adjustment with visible red light; laser class Wired via M1 4-pole or 5-pole connector Range 6 m; range with reflector 30 m Rated operating voltage 4 V DC 1 or solid-state outputs pnp NO or NC contact, adjustable via "teach-in" Analog output 4 to 0 ma Timer function Technical specifications Sensing range 0. 6 m 0. 6 m m Standard target/reflector White 90%, 100 x 100 mm R reflector, x mm Operating mode Distance /jogging Distance / retroreflective Light spot diameter (at end of sensing range) 4 x 1 mm 45 x 60 mm Reproducibility Slow 10 mm 5 mm Fast 15 mm 10 mm Operating voltage range V DC No-load supply current I o, max. 15 ma at 4 V DC Rated operating current I e 100 ma Analog output ma Response time Slow 80 ms 65 ms Fast 13 ms 13 ms Wavelength (illuminant) Measuring laser 905 nm, IR, invisible, class 1 Pilot laser 6 nm, red, visible, class Displays Switching status Operating voltage Yellow LED yellow LEDs Operating mode Orange LED Adjustment menu - 4 red LEDs Plastic (ABS) Ambient temperature during operation -0 C + C Ambient temperature during storage -40 C +80 C Temperature coefficient 0.3 %/K Type 6GR1654-3AD0 6GR1654-3CH0 6GR1654-3CH1 Siemens FS /117

7 Opto Proximity Switches SIMATIC PXO6 L90L Selection and Ordering data Sensing range m Wiring Switching output Analog output 0. 6 M1 plug, 0. 6 M1 plug, 5-pole, M1 plug, 5-pole, type G 1 x light-on or dark-on x light-on or dark-on x light-on or dark-on - pn p yes yes pn p pn p Ckt. diag. 1 A 6GR1654-3AD0 19 A 6GR1654-3CH0 19 A 6GR1654-3CH1 SIMATIC PXO560 L90L A: Subject to export regulations: AL = N and ECCN = EAR99H Dimensions 4 5 M5x ,3 FS10_ receive send 7,43 4 ø5,8 M1x1 81, ,75 /118 Siemens FS

8 SIMATIC PXO800 SIMATIC PXO830 GL Overview Fork for detecting small objects. Molded plastic enclosure with screw-on or dovetail fastening. Wired with 3 or 4-pole M8 connector. 4 different fork widths: - GL30 = 30 mm - GL = mm - GL80 = 80 mm - GL10 = 10 mm Rated operating voltage 4 V DC. Solid-state output pnp. NO or NC contact, adjustable via "teach-in". Versions with external "teach-in". Technical specifications PXO830 GL30 PXO830 GL PXO830 GL80 PXO830 GL10 Operating mode Thru-beam Fork width 30 mm mm 80 mm 10 mm Operating voltage range V DC No-load supply current I o, max. 30 ma Rated operating current I e 100 ma Switching frequency 00 Hz Wavelength (illuminant) 640 nm (red, visible) Switching status indicators 4 yellow LEDs Plastic (ABS) Ambient temperature During operation -0 C +60 C During storage -0 C +80 C Temperature coefficient 0.3 %/K Type 6GR GR GR GR Siemens FS /119

9 SIMATIC PXO800 SIMATIC PXO830 GL Selection and Ordering data Fork width Wiring Switching output External "teach-in" mm 30 M8 plug, 3-pole, type A 30 M8 plug, type B M8 plug, 3-pole, type A M8 plug, type B 80 M8 plug, 3-pole, type A 80 M8 plug, type B 10 M8 plug, 3-pole, type A 10 M8 plug, type B Ckt. diag. Light-ON or dark-on pnp - 1 A 6GR180-7AD00 Light-ON or dark-on pnp yes 14 A 6GR180-7BD05 Light-ON or dark-on pnp - 1 A 6GR1804-7AD00 Light-ON or dark-on pnp yes 14 A 6GR1804-7BD05 Light-ON or dark-on pnp - 1 A 6GR1806-7AD00 Light-ON or dark-on pnp yes 14 A 6GR1806-7BD05 Light-ON or dark-on pnp - 1 A 6GR1808-7AD00 Light-ON or dark-on pnp yes 14 A 6GR1808-7BD05 SIMATIC PXO830 GL A: Subject to export regulations: AL = N and ECCN = EAR99H Dimensions F G 10 4 B A FS10_0079 E D Teach-in 1* 4,5 8 ø4, 1* 5 4,5 C 1 All dimensions in mm MLFB A B C D E F G Fork width 6GR ,5 0 6GR , GR ,5 0 x 8 6GR ,5 0 3 x 8 /10 Siemens FS