NOTICE OF COMPLETION AND AUTHORIZATION TO APPLY THE UL MARK

Transcription

1 NOTICE OF COMPLETION AND AUTHORIZATION TO APPLY THE UL MARK Frank Lofrano IMS ENGINEERED PRODUCTS L L C 1 INNOVATION DR DES PLAINES, IL, , US Our Reference: File E490068, Vol 1 Order: Project: Your Reference: Project Scope: UL/CUL NWIN Rack Certification Titan Frame Dear Frank Lofrano: Congratulations! UL's investigation of your product(s) has been completed under the above Reference Number and the product was determined to comply with the applicable requirements. This letter temporarily supplements the UL Follow-Up Services Procedure and serves as authorization to apply the UL Mark at authorized factories under UL's Follow-Up Service Program. To provide your manufacturer(s) with the intended authorization to use the UL Mark, you must send a copy of this notice to each manufacturing location currently authorized under File E490068, Vol 1. Records in the Follow-Up Services Procedure covering the product are now being prepared and will be sent in the near future. Until then, this letter authorizes application of the UL Mark for 90 days from the date indicated above. Additional requirements related to your responsibilities as the Applicant can be found in the document Applicant responsibilities related to Early Authorizations that can be found at the following web-site: Any information and documentation provided to you involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. We are excited you are now able to apply the UL Mark to your products and appreciate your business. Feel free to contact me or any of our Customer Service representatives if you have any questions. Very truly yours, Ken Monsen Engineer Ken.Monsen@ul.com Reviewed by: Bruce A. Mahrenholz CPO Director Bruce.A.Mahrenholz@ul.com 5f60ffd7-8fcf-4faa-bd9e-4c45b2951b7b This is an electronically generated letter. Signatures are not required for this document to be valid. Page 1 of 1

2 File E Project May 26, 2017 REPORT ON INFORMATION TECHNOLOGY AND COMMUNICATION EQUIPMENT CABINET, ENCLOSURE AND RACKS SYSTEMS IMS Engineered Products LLC Des Plaines, IL Copyright 2017 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety.

3 File E Vol. 1 Sec. 1 Page 1 Issued: DESCRIPTION PRODUCT COVERED: USL, CNL Information Technology & Communication (ITC) Equipment Cabinet, Enclosure and Racks System, Titan Frame Series, Model R- TN-aUb-c where a, b and c indicate the dimensions of the rack. See Model Differences section. ELECTRICAL RATING: Not applicable. ENGINEERING CONSIDERATIONS (NOT FOR UL REPRESENTATIVE S USE): General - The products covered in this Report are Equipment Cabinets intended to be installed in a computer room, an office or other commercial environment. Cabinets that may be provided with optional shelves, casters, locking front and rear doors with recessed handles. The units can be shipped fully assembled or in sections with separate packages containing shelves, casters, etc. equipment or ITE equipment in accordance with the Installation Instructions of the National Electrical Code. The equipment cabinet is provided with Main Protective Earthing Terminal for connection to the mains power supply protective earthing conductor. Required hardware, lock washers, and bolts are provided for installation in the field by licensed electrician or qualified personnel. USL/CNL indicates investigation to UL 2416 Standard For Audio/Video, Information And Communication Technology Equipment Cabinet, Enclosure And Rack Systems; and CSA C22.2 No (2nd Edition + Amendment 1) Information Technology Equipment Safety Part 1: General Requirements - Edition 2 - Revision Date 2011/12/19, except that the shelves were not evaluated to UL 2416, clauses 11.2 and 11.3.

4 File E Vol. 1 Sec. 1 Page 2 Issued: ENGINEERING CONSIDERATIONS (NOT FOR UL REPRESENTATIVE S USE) con t: - Load Ratings: Load Ratings for the Titan Frame series are as follows: Static (on leveling feet)5400 lbs. All rated capacities include roof loads (fan trays, cable troughs, cable trays, cable ladders, cabling, etc.) CONSTRUCTION DETAILS: See Section General for additional details. Corrosion Protection - The units are constructed of painted metal. Operating / Instructions / Safety Manual A copy of any manual or set of instructions is included with each product. Sharp Edges - The units are to be free of sharp edges that may be sufficiently sharp to constitute a risk of injury to persons in normal maintenance and use. Markings are required to be permanent. Marking may be adhesive backed labels or Recognized Component Marking and Labeling Systems (PGDQ2) or may be provided by die-stamping, ink stamping (permanent type ink). The Marking Label must include the following: A. The manufacturer s name, trademark, or other descriptive marking by which the organization responsible may be identified B. A distinctive catalog, model number or the equivalent C. Listing covers ITC Rack Enclosure only or Listing covers ITC Rack Cabinet only.

5 File E Vol. 1 Sec. 1 Page 3 Issued: MODEL DIFFERENCES: General - All models are similar except for mechanical dimensions, i.e height, depth, width etc. Additionally, see ILL. 1. R-TN-aUb-c - as follows a Denotes height in U (designation per EIA-310). Can be 12, 18, 24, 30, 35, 40, 42, 44, 45, 47, 48, 49, 51, 55, 57, 58 or 62 b Denotes width in inches. Can be 24, 29 or 32 c Denotes depth in inches. Can be 255 (25.5), 30, 36, 42, 45 or 48

6 File E Vol. 1 Sec. 1 Page 4 Issued: TITAN FRAME SERIES FIG 1, 2 General Fig. 1 shows an overall front view of a fully assembled Titan Frame cabinet Enclosure. Fig. 2 shows an overall side view of the unit. 1. Enclosure Construction is painted or powdercoat cold-rolled steel 2.0 mm minimum thickness. Refer to MODEL DIFFERENCES for overall dimensions. See ILL Main Protective Earthing Terminal May be threaded holes or stud type. Located at bottom of enclosure. 3. Earthing Symbol Marking for Main Protective Earthing Terminal An IEC marking symbol No provided/stamped adjacent to earthing terminal. 4. Front/Rear Door (optional) - Painted steel. May be solid or perforated. May be single or double panel. Door is locking type with a single point keylock and include recessed metal handles. Sized to fit the enclosure. 5. Door Earthing Connection Provided for front door and rear doors. Each connection consists of wire secured to door and frame by screw/ external tooth lock washer combination. Lock washer located between ring terminal and door or frame. Consists of Items 5a 5c. 5a. Wire R/C (AVLV2), 18 AWG min, green/yellow, rated 600 V. 5b. Ring Terminal Listed (ZMVV). 5c. Insulated Quick-Connect Listed (RFWV). One each male & female. 6. Side Panels (optional) Painted steel. May be full-height single panel or half-height double panels. Secured by spring latches and key locks. See Fig Shelves (optional) - Formed of 2.0 mm thick cold-rolled-steel. Fixed only. 8. Roof Panel (optional) - Painted steel, secured by screws. All 2 mm thick min. My contain knockouts in various shapes. When knockouts are removed, grommets (R/C, QMFZ2) are present to cover edges. Grommets are rated HB min. 9. Stabilizing Feet Four provided. Screw down leveling stands located at each corner of the base. 10. Casters (optional, not shown) Four may be provided.