LIGHTING APPLICATIONS
|
|
- Camilla Dalton
- 5 years ago
- Views:
Transcription
1 Human photo. Can be environmental/documentaty style or portrait of engineer. This image and the one above can be of the same individual(s) with different angle or crop. This image will partially be obscured by orange overlay. LIGHTING APPLICATIONS INNOVATIVE SOLUTIONS From outdoor luminaires to commercial refrigeration, innovation in lighting is taking advantage of broad-based technological progress. Whether you are creating a new system or enhancing an existing design, TE Connectivity (TE) is your lighting solutions provider for electromechanical and electronic components that seamlessly integrate controls and transmit power and data across multiple building systems.
2 Design Navigator Get more information on te.com by clicking on the product names below. PCB and Wire Connectors 1 AMP CT & Mini CT Connectors 1 AC 100 AC -0 to UL, CSA Economy Power II Connectors AC 100 AC - to UL, IEC FASTON/Ultra-Fast Terminals & Splices 8 00 AC/DC -0 to UL, CSA G1 Pin Header 0 AC/DC 100 AC -0 to +10 UL Hermaphroditic Connectors 1 AC/DC 100 AC -0 to UL High Power Inverted Thru Board Card Edge Connectors 7 00 AC/DC 00 AC -0 to UL IDC SSL Connectors 9 0 AC/DC 100 AC -0 to UL Inverted Thru Board Card Edge Connectors 00 AC/DC 100 AC -0 to , - UL Inverted Thru Board Card Edge/Poke-In Connectors 00 AC/DC 100 AC -0 to +10 UL Inverted Thru Board SMT Connectors 70 AC/DC 110 AC -0 to UL LIGHT-N-LOK Connectors 00 AC 00 AC -0 to UL Micro MATE-N-LOK Connectors 0 AC 100 AC -0 to UL Micro Poke-In Connectors 0 AC/DC 100 AC - to UL Mini Hermaphroditic Connectors 00 AC/DC 100 AC -0 to +10 UL, IEC Mini Universal MATE-N-LOK Connectors AC 100 AC - to UL Pivot Power RJ Connectors 1 0 AC/DC 1000 AC -0 to UL PLASTI-GRIP Terminals & Splices 1000 AC/DC 10 max -10 UL, CSA PIDG Terminals & Splices 00 AC/DC 10 max -0 UL, CSA Releasable Poke-In Wire Connectors 9 00 AC/DC 1800 AC -0 to UL, IEC RJ Connectors AC 900 AC -0 to +8 - UL, IEC SMT Poke-In Connectors 0 AC/DC 100 AC -0 to UL Terminal Blocks 1 00 AC/DC varies* -0 to UL, CSA, VDE, cul VAL-U-LOK Connectors AC 100 AC -0 to UL, IEC Vertical and In-Line Screwless Connectors 00 AC/DC 00 AC -0 to UL LED Connectors LUMAWISE Custom LED Holders varies* varies* -0 to +10 varies* varies* varies* varies* LUMAWISE Z Holders Low Profile 0 DC -0 to UL LUMAWISE Z0 Holders with Optics Attach 00 DC -0 to UL, IEC, Zhaga LUMAWISE Z0 Optics Attachment Accessories -0 to +10 Scalable LUMAWISE LED Holder (1 & piece) 0 DC -0 to UL, IEC Z0 LUMAWISE LED Holders 00 DC -0 to UL, IEC, Zhaga Power Distribution Ceiling Grid Power (emerge).1 DC - to +8 UL Circular Plastic Connectors (CPC) 0 00 AC 100 AC -0 to IP7 UL Commercial MATE-N-LOK Connectors 19 0 AC 100 AC - to UL CoolSplice Connectors 00 AC/DC - to NECTOR M Power System 0 00 AC 00 AC -0 to IP7 UL, IEC NECTOR S Power System 7 0 AC/DC 100 AC -0 to IP7 UL, IEC SlimSeal SSL Connectors 00 AC/DC -0 to +10 IP7 UL Universal MATE-N-LOK Connectors AC 000 AC - to IP IP7 UV Resistant Circular Plastic Connectors (CPC) 0 00 AC 100 AC -0 to IP7 UL Photocontrols ANSI C1.1 Compliant Dimming Receptacle 0 80 AC 00 AC - to +8 UL Non-dimming Receptacle 1 80 AC 10 AC -0 to +10 culus Relays G com Series 0 AC 100 AC -0 to +8 IP7 UL, IEC FX Series 0 AC 1800 AC -0 to +8 IP7 UL, IEC RT 1 Power Inrush Relay 0 0 AC 000 AC -0 to +8 UL, IEC Switches RETROFIT LAMPS APPLICATIONS SPECIALTY LIGHTING INDOOR FIXTURES OUTDOOR FIXTURES SIGNAGE LIGHTING CONTROLS Max Current Rating (A) 1 Max Voltage Rating (V) 1 Min Dieletric Withstand Voltage 1 Operating Temperature Range ( o C) SMT Compatible Wire Range (AWG) Power Rocker Switches 0 0 AC 1000 AC -0 to +8 IP0 UL Wire-to-Board Tactile Switches 0.0 DC 00 AC - to +10 IP7 Solid Wire Stranded Wire Wire-to-Wire Board-to-Board IP IP7 Standards IP Sealing Level UL UL, IEC APPLICATIONS Corcom EMI/RFI Power Line Filters 1 Operating Max Rated Current (A) 1 / Temperature Voltage (V) 1 Range ( o C) Corcom FB Series / 77 AC -10 to +8 Q Series 0 / 0 AC -10 to +8 Mounting Style Chassis with mounting holes Chassis with mounting holes Terminations (Input and Output) Solid conductor wire leads Spade terminals, Wire leads, IEC inlet Standards UL, IEC UL, IEC 1 May vary based on application and product selection * Available with custom specifications CSA Canadian Standard Association cul Tested to Canadian Standards by Underwriters Laboratories IEC International Electrotechnical Commission UL Underwriters Laboratories VDE Verband Deutscher Elektroingenieure Zhaga Standard for Interchangeable LED Light Sources
3 RETROFIT LAMPS INDOOR FIXTURES 1 Releasable Poke-In Wire Connectors Minimize shadowing with rounded corners Save space with low profile design Accepts multiple insertions of -18AWG solid & stranded wires Z0 LUMAWISE LED Holders Provide electrical, thermal and optical connection with one product Reduce installation time and eliminate the need for soldering with poke-in wire connection Streamline assembly and installation with tool-less termination of solid fused or stranded wire and snap-in LED retention feature 1 Inverted Thru Board Card Edge/Poke-In 1 Inverted Thru Board (ITB) Card Edge Connectors Connectors 1 Meet specific design requirements with the ability to accommodate -18AWG and -AWG wire Provide a touch safe design with optional cap for enhanced safety Provide mm creep and clearance distance for non-isolated voltage power supplies Micro Poke-in Connectors Minimize shadowing with rounded corners Enable reflow process with high temperature material Save space with low profile design and small footprint 1 I II Quick Reference Guide Eliminate secondary processes with simultaneous PCB surface mounting Save space with low profile design Provide stability during driver board installation with surface mount hold down AMP CT & Mini CT Connectors Provide PC board relief-retention with kinked connector design Save space with miniaturized discrete wire interconnect Offer design flexibility with IDC and crimp termination methods Click on the links above and visit te.com for further information
4 OUTDOOR FIXTURES SIGNAGE SlimSeal SSL Connectors Hermaphroditic Connectors Use in various applications with 1,, & position options Facilitate daisy chaining with 1 position version Allow for use in outdoor or commercial refrigeration applications with IP7 seal rating Save space with low profile, flat surface design Provide design flexibility with SMT or reflow processing compatibility and boardto-board or wire-to-board options Simplify design by allowing the same footprint on both ends of the strip ANSI C1.1 Compliant Dimming Receptacle Support one or two channel dimming protocols with two or four dimming contacts Achieve a reliable power interconnect with robust twist lock contacts Simplify integration into new or existing light fixtures with pre-terminated receptacle NECTOR M Power System Reduce space requirement for multiposition connectors and easily fit through walls with small diameter form factor Meet outdoor sealing requirement with IP7 rating versions Prevent breakdown of material with UV resistance CoolSplice Connectors Reduce assembly time by eliminating the need to pre-strip wire conductors Provide a more ergonomic wire termination than conventional methods with push connect buttons Fit through spaces as small as 1mm with slim, snag resistant connectors UV Resistant Circular Plastic Connectors (CPC) Eliminate the need for replacement of UVdegraded housings Achieve low cost and easy installation with built-in IP7 sealing capability Support a wide range of applications with power and signal design flexibility Click on the links above and visit te.com for further information
5 SPECIALTY LIGHTING LIGHTING CONTROLS NECTOR S Power System Reduce assembly time with power plug and play Allow for simplified power distribution inside furniture with 7.mm diameter Offer material cost, time and space savings by means of a -way power distributor Pivot Power RJ Connectors Save installation time with rapid termination Ensure proper and repeatable installation with molded in polarity and strip length guides Reduce cost by using conductor 18AWG cable IDC SSL Connectors Allow for quick installation with tool-less termination and no wire stripping Utilize in harsh environments with robust design Provide design flexibility with SMT/ thru-hole and closed end/feed-thru configurations Corcom FB Series Filters Allow for use in most standard lighting tracks with compact size Simplify installation with screw mount design Meet international requirements with EMI protection Catalog Quick Reference Guide Micro MATE-N-LOK Connectors Maximize board space with single and dual row, vertical and right angle configurations Prevent accidental unmating in high vibration applications with positive latches Accommodate wire sizes from 0 to 0 AWG with a broad range of crimp, snapin, pin and receptacle contacts I II RT 1 Power Inrush Relay Enable switching of high inrush loads while saving space with smaller housing dimensions Meet industry standard making and breaking capacity with tungsten versions Allow for dense PCB mounting with low power consumption of bistable coil versions Click on the links above and visit te.com for further information
6 LET S CONNECT TE Connectivity brings you power products that drive design solutions. As power requirements vary depending on the application, TE helps solve your power challenges by taking the guess work out of the equation by providing a variety of products with key design characteristics. With our wide variety of products and superior design capabilities, you will find the right match for your unique application. Technical Support te.com/support-center Australia Austria Belgium Brazil China Czech Republic Denmark Estonia Finland France Germany Greece Holland Hungary India Ireland Italy Japan Korea Latvia Lithuania Luxembourg Netherlands New Zealand Norway Poland Portugal Russia Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan Turkey United Kingdom United States of America te.com Pro, AMP, CoolSplice, Corcom, FASTON, LIGHT-N-LOK, LUMAWISE, MATE-N-LOK, NECTOR, PIDG, PLASTI-GRIP, PolySwitch, Ultra-Fast, VAL-U-LOK, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 01 TE Connectivity Ltd. family of companies All Rights Reserved /1 Original 0/1 Revised
INDUSTRIAL COMMUNICATIONS EVERY CONNECTION COUNTS
INDUSTRIAL COMMUNICATIONS Networked manufacturing environments enable seamless communication, as well as greater speed and efficiency. In addition to data transfer among equipment on the factory floor,
More informationFLAT FLEXIBLE CABLE (FFC) CONNECTORS
FLAT FLEXIBLE CABLE (FFC) CONNECTORS TE Connectivity s (TE) family of FFC connectors includes a variety of high density cable-to-board and cable-to-cable connectors designed for automated assembly. The
More informationAMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
More informationREMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS A concept that is saving your most valuable asset your time. The contact design based on insulation displacement of our RITS (Remote I/O Termination
More informationINDUSTRIAL MINI I/O CONNECTOR
INDUSTRIAL MINI I/O CONNECTOR The Industrial Mini I/O connector system is a compact, wire to wire and wire-to-board solution for reliably serial, bus and Ethernet connections in industrial applications.
More informationInnovative Solutions for Industrial Control
Innovative Solutions for Industrial Control TE Connectivity (TE) is your industrial control solution provider for electromechanical and electronic components. Whether you are designing a new system or
More informationFullAXS CONNECTOR SEALING & CABLE ASSEMBLY
FullAXS CONNECTOR SEALING & CABLE ASSEMBLY System Solution Guide Next Generation x-tta Solution Next generation WiMAX and Long Term Evolution (LTE) Fiber/Power/Signal To The Antenna (x-tta) connectivity
More informationINSTALLATION INSTRUCTIONS LFH160 Cable
INSTALLATION INSTRUCTIONS LFH160 This guide describes how to connect and use the National Instruments LFH160 cable which has a maximum voltage rating of 100 VDC, CAT I. Use the LFH160 cable to connect
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationHan R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
More informationEUROCARD CONNECTORS PER DIN AND IEC
EUROCARD CONNECTORS PER DIN 41612 AND IEC 60603-2 Quick Reference Guide TE Connectivity s (TE) Eurocard two piece connectors offer a reliable, cost effective solution enabling communication across protocols
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationFP-PS-4. Features. Installation
OPERATING INSTRUCTIONS FP-PS-4 FieldPoint Power Supply These operating instructions describe the installation, features, and characteristics of the FP-PS-4. Features The FP-PS-4 is a FieldPoint power supply
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationMODULAR PLUGS, ACCESSORIES AND TOOLING
MODULAR PLUGS, ACCESSORIES AND TOOLING 4th Edition Introducing the New Universal Contact BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING TE CONNECTIVITY MODULAR PLUG PORTFOLIO TE
More informationBUSBAR CONNECTIVITY QUICK REFERENCE GUIDE
BUSBAR CONNECTIVITY QUICK REFERENCE GUIDE THINGS TO CONSIDER WHEN CHOOSING BUSBAR PRODUCTS Application: Properties like dimensions, shape, isolation, plating, base material, and use of connector should
More informationGLOW WIRE CONNECTORS Product Summary
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/documentaty style or portrait of engineer. industry photo.
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationTest Fixtures for low PCB volumes MA xxx Change made easy
est Probes est Fixtures est Fixtures for low PCB volumes MA xxx Change made easy Catalogue 1.2 MA 350/F AS MA350 force up to 300 N usable area up to to 160 x 100 mm MA 3xx-series generous and free accessibility
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationSpectraGuard Sensor SS-300-AT-C-50 Technical Specifications
SpectraGuard Sensor SS-300-AT-C-50 Technical Specifications 1 Product Overview ITEM Product Name Model Number Power Supply SpectraGuard Sensor SS-300-AT-C-50 802.3af Class 0 Power Over Ethernet Nominal
More informationIntroducing. Economy Power 2.5 (EP 2.5) Connector Series. EP 2.5 connector halves are available from 2 to 40 positions. ELECTRICAL
Introducing Economy Power. (EP.) Connector Series EP. -Posn Receptacle Housing with Latch and Tabs, Part Number - Economy Power. connector (EP.) is a new type of single row or dual row crimp connector
More informationQuick Reference Guide AMPMODU System 50
Quick Reference Guide AMPMODU System 50 The AMPMODU System 50 connector family includes a wide variety of high density boardto-board (through hole and surface mount) and cable-to-board connectors. AMPMODU
More informationFieldPoint. FP-1000/1001 FieldPoint Quick Start Guide. Install the Network Module Mount the module on a DIN rail. What You Need to Get Set Up
TM FieldPoint FP-1000/1001 FieldPoint Quick Start Guide What You Need to Get Set Up Network module 35 mm DIN rail Two DIN rail locks (included) Terminal base(s) I/O module(s) 11 30 VDC power supply Accessories:
More informationE-T-A PowerPlex Bus System for Marine Applications
E-T-A PowerPlex Bus System for Marine Applications E-T-A PowerPlex Technology E-T-A PowerPlex Bus System for the Protection and Control of Electrical Installations in Recreational and Work Boats. E-T-A
More informationNI CB-37F-LP. Introduction INSTALLATION GUIDE. Connector Block for 37-Pin D-Sub Devices
INSTALLATION GUIDE NI CB-7F-LP Connector Block for 7-Pin D-Sub Devices Introduction This installation guide describes how to install and connect signals to the NI CB-7F-LP connector block for use with
More informationNECTOR S Line lighting components. Flexible solutions for your lighting designs
NECTOR lighting components Flexible solutions for your lighting designs The lighting industry is always changing. It is constantly in pursuit of more energy-efficient products with longer life-spans that
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationNI 6521 Specifications
NI 6521 Specifications This document lists specifications for the NI 6521 device. All specifications are subject to change without notice. These specifications are typical at 25 C unless otherwise noted.
More informationREMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS The e-con standard was developed in Japan in 2001 by a group of Japanese manufacturers in order to standardize connections from sensors to terminals.
More informationField Terminal Assembly (FTA)
FTA-C300 Brochure Field Terminal Assembly (FTA) New interfaces for the Honeywell Experion PKS C300 controller Weidmüller s new interfaces and pre-assembled cables allow you to wire up I/O cards from Honeywell
More informationAC/DC (120V) Input Module Cat. No IAD Series C
Installation Instructions To The Installer Pre-installation Considerations Power Requirements Initial Handling This document provides information on: important pre-installation considerations power supply
More informationOPERATING INSTRUCTIONS AND SPECIFICATIONS. NI 9208E 16-Channel, ±20 ma, 24-Bit Analog Input Module
OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9208E 16-Channel, ±20 ma, 24-Bit Analog Input Module This document describes how to use the National Instruments 9208E and includes dimensions, pin assignments,
More informationOPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9870E
OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9870E 4-Port, RS232 Serial Module This document describes how to use the National Instruments 9870E and includes dimensions, pin assignments, and specifications
More informationTektronix Logic Analyzer Probes P5900 Series Datasheet
Tektronix Logic Analyzer Probes P5900 Series Datasheet Applications Digital hardware validation and debug Monitoring, measurement, and optimization of digital hardware performance Embedded software integration,
More informationCLASS 1 DIVISION 2 PRODUCTS
CLASS 1 DIVISION 2 PRODUCTS CLASS 1 DIVISION 2 PRODUCTS UPDATED PRODUCT INFORMATION Class 1 Division 2 Products Non-Incendive Barriers Two non-incendive barriers are available - one for 24Vdc discrete
More informationCable distribution systems
distribution systems Top-quality cable distribution systems Passive distribution systems are an important part of any machine installation, as they replace costly connection cabinets and error-prone wiring.
More informationYou need the following to set up and use your terminal block:
INSTALLATION GUIDE NI TB-2706 PXI/PXIe Terminal Block for M Series and NI 6143 Devices Contents Introduction This installation guide describes how to install and connect signals to the NI TB-2706 terminal
More informationSUNCLIX Connection technology for photovoltaics
SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete
More informationFP-2000/2010 FieldPoint Quick Start Guide
FP-2000/2010 FieldPoint Quick Start Guide What You Need to Get Set Up 1 Network Module Mounting Hardware (DIN rail or panel mount accessory) Terminal Base(s) I/O Module(s) Power Supply Accessories: Ethernet
More informationOPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9871E
OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9871E 4-Port, RS485/RS422 Serial Module This document describes how to use the National Instruments 9871E and includes dimensions, pin assignments, and specifications
More informationAmphenol LTW Innovation in Waterproof Solution
Amphenol LTW CATALOGUE http://www.amphenolltw.com Shortcut by Product Series Circular Connector Power Connector M Series Sensor Connector USB Connector Screw Threaded Type, Lock Bayonet Type or Push Lock
More informationAUTOMATION & CONTROL /// PIDG TERMINALS & SPLICES. PIDG TERMINALS & SPLICES Quick Reference Guide
AUTOMATION & CONTRO /// PIDG TERMINAS & SPICES PIDG TERMINAS & SPICES Quick Reference Guide FEATURES AND BENEFITS Made of high conductivity copper; tin-plated for optimal corrosion protection Copper sleeve
More informationC5C Cross-Connect System
C5C Cross-Connect System I N S T A L L A T I O N I N S T R U C T I O N High-Density Connection Blocks 1.0 General Product Information The C5C cross-connect system is comprised of a high-density connection
More informationInstructions. (For 6180 Industrial Computers) Applications. Overview & Safety
Instructions (For 6180 Industrial Computers) Applications This instruction sheet describes how to replace the following displays and backlights for 6180 Industrial Computers. All display kits contain a
More informationCable distribution systems
Cable distribution systems Top-quality cable distribution systems Passive distribution systems are an important part of any machine installation, as they replace costly connection cabinets and error-prone
More informationNI 653x Cable Adapter
USER GUIDE NI 65x Cable Adapter Contents The NI 65x cable adapter interfaces with National Instruments high-speed digital I/O (DIO) devices. The cable adapter provides an easy way to connect the Very High
More informationInstructions. (For 6180 Industrial Computers) Installing a Processor Upgrade
Instructions (For 6180 Industrial Computers) This document describes how to remove or install a Pentium processor in the 6180 Industrial Computer. Processor specifications are also provided. Installing
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More informationED-22 Analog Output Series Magnetic Encoder
SPECIFICATIONS Analog voltage output Low profile Standard industry package size Sleeve bearing The ED-22 series magnetic encoder can be used to replace a conventional potentiometer. This product offers
More informationSMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More information(Smallest Circuit) Current Rating. (Largest Circuit) Housing Lock. Current Rating. 12A 11A Positive or None
General Overview The Jr. was specifically developed for positive locking, wire-to-wire and wire-to-board applications. It is available in single row and dual row versions. The system offers the widest
More informationTTI & AVX Connectors. Product Guide. TTI, Inc. Never Short on Solutions.
TTI & AVX Connectors Product Guide www.ttieurope.com TTI, Inc. Never Short on Solutions Introduction We at TTI, Inc. are AVX s premier authorised distributor. AVX is a leading worldwide manufacturer of
More informationINTERCONNECT SOLUTIONS
INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply
More informationCisco CallManager 4.0-PBX Interoperability: Lucent/Avaya Definity G3 MV1.3 PBX using 6608-T1 PRI NI2 with MGCP
Application Note Cisco CallManager 4.0-PBX Interoperability: Lucent/Avaya Definity G3 MV1.3 PBX using 6608-T1 PRI NI2 with MGCP Introduction This is an application note for connectivity of Lucent/Avaya
More informationTHAT S WHY THE WORLD S MANUFACTURERS COUNT ON TE CONNECTIVITY. MOTION & DRIVES EVERY CONNECTION COUNTS
THAT S WHY THE WORLD S MANUFACTURERS COUNT ON TE CONNECTIVITY. MOTION & DRIVES EVERY CONNECTION COUNTS TE OVERVIEW TE Connectivity is a $3 billion world leader in connectivity. We design and manufacture
More informationANSI C Dimming Receptacles
ANSI C136.41-2013 Dimming Receptacles Application Specification 114-32115 09 JUN 17 Rev D NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
More informationCROWN LINE Power Bus Bar Distribution System
COWN LINE Power Bus Bar Distribution System COWN LINE Power Bus Bar Distribution System The pluggable bus bar system Currents up to 300 Amps Up to 2 meters in length Pluggable breakers VDE finger proof
More informationcfp-rly-421 Features Installing the cfp-rly-421 FieldPoint Operating Instructions Eight-Channel SPST Relay Module
FieldPoint Operating Instructions cfp-rly-421 Eight-Channel SPST Relay Module These operating instructions describe how to install and use the National Instruments cfp-rly-421 relay module, revision 185151C-01
More informationCM and SB Series Single Phase Bridge Rectifiers
Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through
More informationCisco Aironet In-Building Wireless Solutions International Power Compliance Chart
Cisco Aironet In-Building Wireless Solutions International Power Compliance Chart ADDITIONAL INFORMATION It is important to Cisco Systems that its resellers comply with and recognize all applicable regulations
More informationDEUTSCH AFD Series Connectors Qualified to MIL-DTL Series II
DEUTSCH AFD Series Connectors Qualified to MIL-DTL-26482 Series II Miniature Circular Connectors with Quick- Connect Bayonet Coupling and Environmental Sealing to Help Withstand Harsh Environments DEUTSCH
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationSIM CARD CONNECTORS BENEFITS FEATURES APPLICATIONS
SIM CARD CONNECTORS SIM (Subscriber Identity Module) and UIM (Universal Identity Module) cards are widely used in a variety of mobile applications, including, billing, security and number stage purposes
More informationSF5x Series DO-201AD. Page <1> 26/07/08 V1.1. Dimensions : Inches (Millimetres)
Features: High efficiency, low V F. High current capability. High reliability. High surge current capability. Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationHigh Power ELCON Drawer Connectors
High Power ELCON Drawer Connectors 2009 by Tyco Electronics Corporation. All Rights Reserved. is a trademark of United Laboratories, Inc. CROWN BAND, ELCON, TE logo and Tyco Electronics are trademarks.
More informationDATA SHEET. Catalyst Inline Power Patch Panel
DATA SHEET Inline Power Patch DEPLOYED IN THE WIRING CLOSET, THE CATALYST INLINE POWER PATCH PANEL PROVIDES FAST ETHERNET ENHANCEMENTS NEEDED FOR MULTISERVICE NETWORKING WHILE PRESERVING CUSTOMER INVESTMENTS
More informationItems exceeding one or more of the maximum weight and dimensions of a flat. For maximum dimensions please see the service user guide.
Rate Card International Flats Effective from 2 April 2013 Pricing your mail Once you have selected the service you wish to use, calculate the price using the tables on the following pages. For more information
More informationEasy Installation Guide
Easy Installation Guide Remote Engineer Router ServiceGate Remote Engineer B.V. De Parse 11, 8491 PJ, Akkrum The Netherlands +31 527 712 049 info@remoteengineer.eu www.remoteengineer.eu Package Contents
More informationAEROSPACE, DEFENSE & MARINE /// MC801 FIBER OPTIC CONNECTORS
MC801 FIBER OPTIC CONNECTORS RUGGED, RELIABLE CONNECTIVITY COMBINING HIGH-PERFORMANCE ARINC 801 TERMINI WITH THE VERSATILITY AND FAMILIARITY OF D38999 SERIES III STYLE CONNECTORS MC801 FIBER OPTIC CONNECTORS
More informationFL BT EPA. Extract from the online catalog. Order No.:
Extract from the online catalog FL BT EPA Order No.: 2692788 Commercial data EAN 4046356422413 Pack 1 Weight/Piece 256.60 g Catalog page information Page 215 (AX-2009) Please note that the data given here
More information1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
More informationInstallation and user manual. PSTN module
Installation and user manual All rights reserved. Copyright 2015 Wigersma & Sikkema B.V., NL-6980 AC Doesburg All the figures and descriptions in this installation, operating manual have been compiled
More informationFullAXS CONNECTOR SEALING & CABLE ASSEMBLY
FullAXS CONNECTOR SEALING & CABLE ASSEMBLY System Solution Guide Next Generation x-tta Solution Next generation WiMAX and Long Term Evolution (LTE) Fiber/Power/Signal To The Antenna (x-tta) connectivity
More informationFINE PITCH BOARD-TO-BOARD CONNECTOR SERIES THE SMART WAY TO GO FOR RELIABILITY
QUICK REFERENCE GUIDE FINE PITCH BOARD-TO-BOARD CONNECTOR SERIES THE SMART WAY TO GO FOR RELIABILITY FINE PITCH BOARD-TO-BOARD CONNECTOR SERIES When it comes to high-reliability in small spaces, TE delivers
More informationStandard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationMinitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
More informationBasic Temperature and Limit Controllers. Provide Economical Solution for a Wide Range of Applications SPECIFICATION SHEET
SPECIFICATION SHEET Basic Temperature and Limit Controllers Basic Temperature and Limit Controllers Provide Economical Solution for a Wide Range of Applications The basic and limit microprocessor-based
More informationBasic Temperature and Limit Controllers
Basic Temperature and Limit Controllers Basic Temperature and Limit Controller Provide Economical Solution for a Wide Range of Applications The basic and limit microprocessor-based controllers from Watlow
More informationInstallation Instructions
Packing Data PK Installation Instructions (Catalog Numbers 46-IB32, -IV32, -OB32, OB32E and -OV32) 2 SLC 5/03 and SLC 5/04 Modular Processors Important User Information Because of the variety of uses for
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationInternational Packets
Rate Card International Packets Effective from 2 April 2013 Pricing your mail Once you have selected the service you wish to use, calculate the price using the tables on the following pages. For more information
More informationCISCO 7304 SERIES ROUTER PORT ADAPTER CARRIER CARD
DATA SHEET CISCO 7304 SERIES ROUTER PORT ADAPTER CARRIER CARD The Cisco 7304 Router, part of the industry-leading Cisco 7000 Series, is optimized to deliver flexible, high-performance IP and Multiprotocol
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationPCI Express x16 Graphics 150W-ATX Specification Revision 1.0
PCI Express x16 Graphics 150W-ATX Specification Revision 1.0 October 25, 2004 Revision Revision History Date 1.0 Initial release. 10/25/04 PCI-SIG disclaims all warranties and liability for the use of
More informationService withdrawal: Selected IBM ServicePac offerings
Announcement ZS09-0086, dated April 21, 2009 Service withdrawal: Selected IBM offerings Table of contents 1 Overview 9 Announcement countries 8 Withdrawal date Overview Effective April 21, 2009, IBM will
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationHigh-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
More informationPRINTER ACCESSORIES TECHNICAL DATASHEET UNIVERSAL REEL HOLDER
PRINTER ACCESSORIES TECHNICAL DATASHEET TTDS-260 issue 3, July 2015 UNIVERSAL REEL HOLDER The Universal reel holder is a free standing bench top, or wall mounted reel holder. Designed to dispense all TE
More informationzsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion
More informationCMC CP Terminals CP 0.635mm (.025 ) CP 1.50mm (.059 ) CP 2.80mm (.110 ) FEATURES AND SPECIFICATIONS
FEATURES AND SPECIFICATIONS CMC Connectors sealed, high-density, modular and cost-effective connection system for heavy-duty applications The CMC connector family from Molex is a sealed, high-density connection
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationOCT 17 Rev A
Product Specification 108-133085 05OCT 17 Rev A The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More informationFP-AO-200 AND CFP-AO-200
FieldPoint Operating Instructions FP-AO-200 AND CFP-AO-200 Eight-Channel 20 ma Loop Output Modules These operating instructions describe how to install and use the National Instruments FP-AO-200 and cfp-ao-200
More information