Product Selection Guide
|
|
|
- Phillip King
- 5 years ago
- Views:
Transcription
1 Product Selection Guide Automatic Timing and Controls Diversified Electronics TIMERS COUNTERS MOTOR PROTECTION POWER ALERTS
2 NEW PRODUCT ADDITIONS FROM ATC & DIVERSIFIED ELECTRONICS SLU Universal Phase Monitor For 3 phase systems. Adjustable voltage, time delay and imbalance percentage. Auto ranging scales, adjustable re-start and fault delays. Automatic reset. ARC / ARD Series 8 pin Duplexor Sequence on simultaneous off. ARD has 3 position switch to provide a lock option into normal duplex action. SPM Seal Failure Monitor, Temp Switch & Liquid Level Controls Wraps 3 very useful features into 3 modules. SPM AEA is a seal failure and temp relay. SPM AAA offers expanded adjustment range. The LPC is a conductive level control. 175 Series Din Mount Includes a DPR175 Phase Monitor, 175MU Multi-Function Timer, 175DU Five Function Timer, 175MD Multi-Function Timer w/keypad and the 175SO Single Function On-Delay timer. 425AR Multi-Function Timer & 385AR Multi-Function Timer/Counter Incorporates dual display and 90 to 270 VAC/DC supply voltage. ATC500 and ATC550 PID/TC Controllers Dual display, selectable inputs, 85 to 270 VAC/DC supply voltage, soft start, RS485 communication and field selectable control output. 1/16 DIN Analog Panel Mount Timers 405AE On-Delay 8 Pin, 405AR On-Delay 8 Pin / 12 time ranges and the 422AR Repeat 8 Pin time selectable. Both 405AR and 422AR also available in screw terminal housing.
3 TABLE OF CONTENTS Phase Voltage Monitors...3, 4 Current Monitors...5 Alternating Relays...6 Isolated Switches, Seal Failure Alarm/Temperature Switch...7 Power Alerts...8 Industrial Timers...9, 10, 11, 12 Industrial Counters...13 marshbellofram.com
4 PHASE VOLTAGE MONITORS Model / Series Protection SLU-100 SLU-0200 SLU-0201 Phase Loss, Under Voltage, Over Voltage, Phase Unbalance, Phase Sequence, Phase Shift SLU-600 MPA SLA Phase Loss, Under Voltage, Over Volt. Phase Unbalance, Frequency Shift Phase Sequence, Phase Shift, Rapid Cycling Lockout Current- Unbalance Over Volt/Current Under Volt/Current Over Temperature Ground Fault Phase Loss, Under Voltage, Phase Reversal Nominal Line Voltages 208, 220, 240, , 220, 240, VAC 120, 208, 220, 240 Phase to Phase 50/60 Hz 415, 440, 460, , 440, 460, 480, 575, 600 Med. Volt. version 380, 415, 440, 460, 480, 575, Reset Automatic, Manual Automatic, Manual Automatic, Manual Automatic, Manual Contact Configuration SPDT DPDT DPDT SPDT, DPDT Contact Rating Resistive 10A, 5A, 3A Mounting Style Plug In, Din Rail Din Rail, Surface Mount Din Rail, Surface Mount Plug In, Surface Mount Approvals UL, CE UL UL UL, CSA *For Gen App.- See SLU marshbellofram.com
5 PBD PBE SLD SLM UOA Under and Over Voltage Limit Phase Sequence w/ Adj. Release Delay True RMS Voltage Band Monitor Under & Over Voltage Phase Sequence Phase Unbalance Phase Loss, Under Voltage, Phase Reversal Phase Loss, Under Voltage, Over Voltage Phase Unbalance, Frequency Shift Phase Sequence, Microprocessor Based Single Phase Under Voltage Monitor 120, 230, 400, , 220, , 240, , 208, 220, 240, 12, 24, 48, 110 VDC 220, 240 VDC 480, , 415, 440, 460, 480, / , 415, 440, 460, 480, 575, 24, 120, 208 Automatic Automatic Automatic Automatic, Manual Automatic DPDT DPDT SPDT, DPDT DPDT DPDT, SPDT 600 VAC 10A,5A,3A by model no. 600 VAC 5A or 10A by model no. Surface Mount Surface Mount Plug in, Surface Mount Surface Mount Plug in, Surface Mount UL UL UL UL, CSA UL, CSA marshbellofram.com
6 CURRENT MONITOR RELAYS Model / Series CLB CMB CMG CMU Protection 3 Phase Current Unbalance and Over Current AC go/no go Monitor AC go/no go monitor " Self Powered " AC Under Current Control Voltage 24,, 24 VDC 24 or /DC Adjustable Current Trip Point 1.0 to 5.0, 2.0 to10 1 to 10 amps fixed Range (amps) 15 amps continuous up to 50 amps amps fixed (CMG-0100), 2 amp fixed (CMG-0101) 400 amp (CMG-0100) 200 amp (CMG-0101).05 to.25, 0.2 to 1.0, 1.0 to 5.0, 2.0 to 10.0, 4.0 to 20.0 up to 25 amp max Reset Automatic, Manual Automatic Automatic Automatic Contact Configuration SPDT SPDT SPST n/o DPDT Contact Rating Resistive 5A relay or 1A s-state Mounting Style Surface Mount Plug -in Style D Surface Mt. Plug-in, Surface 5 marshbellofram.com
7 ALTERNATING RELAYS Model / Series ARA, ARB ARC, ARD ARA ARM ARM Number of Loads Sequenced 2 (ARB and ARD w/ Special Function) Duplexor, Triplexor, Quadraplexor Integrated Duplex Controller Triplex and Quadplx, Alternating Controller Control Voltage 24, 120 VDC 24, 120, 208, 24, 24, 24, Expandable Yes with models ARA-120-AME and ARA-120-ANE Contact Configuration SPDT,DPDT, DPDT Crosswired Control Switch (3) SPST n/o SPST n/o Contact Rating Resistive VAC Mounting Style Plug-in Surface Mount Surface-Panel Mount Surface Mount Approvals UL, CSA UL, CSA model AFE UL 913 UL Application / Notes 2 loads Duplexor SOSO (ARC-ARD) Special Functions Intrinsically Safe Inputs Intrinsically Safe, SOSO, FOFO output marshbellofram.com
8 ISOLATED SWITCHES / SEAL FAILURE ALARM Model / Series ISO ISO, ISL Latching Output SPM Protection Single Channel Isolated Switch Multiple Channel 2,3,4 Isolated Switch Single & Dual Channel Seal Failure Alarm, Dual Function - Failure and Temperature Control Voltage 24, 24, Control Switch 16 VDC Open Circuit Voltage 200 ua short circuit current 6.2 VDC Open Circuit Volt. 10 ua short circuit current 9 VDC, probe voltage 9 VDC temperature switch 12 VDC Contact Configuration SPST n/o SPST n/o DPDT, SPST n/o,spdt Contact Rating Resistive Mounting Style Plug-in, Surface Mount Surface Mount Plug in, Surface Mount Approvals UL 913 UL 913 UL Application / Notes Hazardous Location Hazardous Location Submersible Pump 7 marshbellofram.com
9 POWER ALERTS Model / Series UPA BFA GFD Protection / Operation Visual Power Alert Arc Flash Risk Reduction Visual Fuse Status Indicator 3 Phase Ground Fault Display Operational Range AC Single or Three Phase 40 to 600 VAC 50/60/400 Hz Line to Line or Line to Ground DC or Stored Energy 30 to 1000 VDC Line to Line or Line to Ground Nominal Voltage VAC +/- 10% Phase to Phase 50/60 Hz Nominal Voltage VAC +/- 10% Phase to Phase 50/60 Hz Max. Rated Voltage 750 VAC / 1000 VDC Line to Line or Line to Ground Maximum Continuous 660 VAC Phase to Phase Maximm Continuous 660 VAC Phase to Phase Terminations (4) 8ft, 18 AWG 1000V UL-145 (6) 2ft 18 AWG 600V (4) 2ft 18 AWG 600V Notes Various models and options All Fuses UL Class H, J, K, R, RK Avoid Potential 2nd Ground Fault marshbellofram.com
10 INDUSTRIAL TIMERS Model / Series 405AR 405C 407C 409B Mode of Operation On Delay / Interval On Delay / Interval On Delay / Interval Signal Off Delay Interval / Push Button Start Type Analog Analog Analog Analog Operating Voltages 20- & VDC 24- & 24 VDC 12 VDC only 24 VDC only 24- & 24 VDC 24 VDC only 24- & 24 VDC 12 VDC only Time Range.05 Sec to 30 Hrs.05 Sec to 50 Hrs.05 Sec to 50 Hrs.05 Sec to 50 Hrs Contact Configuration DPDT DPDT, Instantaneous DPDT DPDT Contact Rating Resistive Mounting Style 250 VAC/8 pin VAC/Term. 1/16 DIN 8 pin or Screw Terminal 250 VAC 250 VAC 250 VAC 1/16 DIN 8 pin 1/16 DIN 11 pin 1/16 DIN 8 pin Approvals UL, CE UL UL UL 9 marshbellofram.com
11 417B 422AR 425A 328E 339B True-Off Delay Repeat Cycle Off First, On First On Delay / Time Up / Time Down On Delay / Interval / Signal Off Delay On Delay / Interval Analog Analog Digital / Display Analog Analog 24- & 24 VDC 20- & VDC & 24 VDC 24 VAC/DC or 12 VDC.1 Sec to 10 Min.05 Sec to 10 Hrs.001 Sec to 999 Hrs.05 Sec to 10 Hrs.075 Sec to 10 Hrs DPDT, SPDT DPDT DPDT, Instantaneous DPDT DPDT 250 VAC 1/16 DIN 8 or 11 pin 250 VAC/8 pin VAC/Term. 1/16 DIN 8 pin or Screw Terminal 250 VAC 250 VAC 250 VAC 1/16 DIN 8 pin 1/8 DIN 11 blade pin 36mm 8 pin UL, CE UL, CE UL, CE, CSA UL, CE, CSA, FM UL, CE, CSA, FM marshbellofram.com
12 INDUSTRIAL TIMERS Model / Series 365C 355C 652, 653, 655 CP Mode of Operation On Delay / Interval On Delay / Interval On Delay, Interval Reverse Start Delay, Repeat Cycle, Timer/Counter Percentage Timer Type Digital Prog. Display Digital / Display Digital / Display Dial Adjusted Operating Voltages 24 VAC or 24 VDC Time Range.01 Sec to 999 Hrs.01 Sec to Min.001 Sec to 199 Hrs.9 Sec to 60 Min Contact Configuration DPDT, Instantaneous DPDT, Instantaneous 2-DPDT, Delayed 2-DPDT, Instantaneous 1-SPDT, Instantaneous SPST Contact Rating Resistive 120, 240, 24 VAC 120 VAC Mounting Style 72mm panel mount 72mm panel mount Plug-In case / Panel Mount Panel Mount Approvals UL UL UL UL 11 marshbellofram.com
13 304GX 425AR 385AR TD, TB Series 7DT Percentage Timer Multi-Function Time Up / Time Down Multi-Function Time/Count Various By Model Weekly Timer Dial Adjusted Dual Digital Display Dual Digital Display Analog, Dip Switch 2 Channel Display 90 to 270 VAC/DC 50/60 Hz 90 to 270 VAC/DC 50/60 Hz Various By Model 12-/DC 15/30/60/120 Sec/Min 0 to 9999 sec/min/hrs Counter -999 to 9999 Timer sec/min/hrs Various By Model Daily, Weekly SPST (2x) SPST, Instantaneous (2x) SPST (NO) SPDT, DPDT (2) SPDT 230 VAC 230 VAC 250 VAC 250 VAC Panel Mount 1/16 din screw terminal 1/16 din screw terminal Plug-in socket DIN rail mount UL, CE curus, CE curus, CE UL,CSA by model marshbellofram.com
14 INDUSTRIAL COUNTERS Model / Series 366C 356C 354C 5708A Mode of Operation Counter- Up, Down Stop & Go Count Up High Speed Counter w/ 24VDC Supply Timer / Counter Frequency / Tach Type Digital Display Knob Adjustable Digital / Toggle Lever Digital / Toggle Lever Multi Function Operating Voltages 24 VAC or VDC LR44 Battery Counting Range 1 to 99,990 1 to 99,990 1 to 99,990 Count, Time, Hz, Rpm Contact Configuration DPDT, Instantaneous DPDT, Instantaneous SPDT Contact Rating 240, 24 VAC Mounting Style 72mm panel mount 72mm panel mount 72mm panel mount 25 x 50mm Approvals UL UL, CE UL, CE 13 marshbellofram.com
15 When Timing is Everything. Process engineers and machine designers alike turn to the Automatic Timing & Controls division of Marsh Bellofram (ATC) for their industrial timing and control requirements. These highly rugged, high-reliability products are engineered to provide accurate and repeatable timing and monitoring operations in all types of industrial environments, including factory floor, food processing, plastics, packaging, water treatment and many OEM applications. The ATC product family has recently expanded to include 1/16 DIN timers, electromechanical timers, counters, solid state cube and plug-in timers, and time delay relays (TDR). Welcome to ATC Diversified Electronics For more than 50 years, the ATC Diversified Electronics division of Marsh Bellofram (ATC Diversified) has offered some of the industry s highest reliability AC current monitors, motor and pump protection, isolated switches and alternating relay products. As a leader in solid state control products, the division was the industry pioneer in the first Phase Monitor Relay designed to protect 3-phase equipment from adverse conditions such as Phase Loss (single phasing), Under Voltage (brown-outs), and Phase Reversal (improper sequence). Continued investment in new product R&D and continuous quality improvements allows the ATC Diversified team to offer market-leading technologies, keeping pace with the needs of an evolving industrial marketplace. marshbellofram.com
16 Marsh Bellofram Group of Companies 8019 Ohio River Blvd. Newell, WV USA Phone: Fax: LTATC0602 3/16 2,500-5,000
405A Timer with Instantaneous Relay
< Marsh Bellofram Group of Companies < Automatic Timing & Controls < Timer < 405A Series Downloadable Files: 405A Series 405A Timer with Instantaneous Relay On-Delay version with instantaneous relay Selectable
407B 1/16 DIN Multi-Mode Timer
< Marsh Bellofram Group of Companies < Automatic Timing & Controls < Timer < 407B Series Downloadable Files: 407B Series 407B 1/16 DIN Multi-Mode Timer Selectable On-Delay/Off-Delay/Interval Timing Modes
ALTERNATING RELAYS & CONTROLLERS ARM Series
ALTERNATING RELAYS & CONTROLLERS ARM Series Process Control Equipment for Hazardous Locations 7M26 UL913 INCLUDES INTRINSICALLY SAFE INPUTS Integrated Duplex Controller SOSO Operation (Sequence-on, Simultaneous-off)
seal leak & temperature relays
seal leak & temperature relays 2014 catalog a of products 800.238.7474 www.macromatic.com sales@macromatic.com 1 SINGLE & DUAL CHANNEL SFP Series SFP Series Pump Seal Failure Relays are designed to monitor
TIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
RELAYS MAGNECRAFT. Energy Conserving. Time Delay. Sockets. Relays. Relays. Power Relays. Solid State. Plug-In Relays PCB.
MAGNECRAFT RELAYS Sockets Time Delay Relays Energy Conserving Relays Plug-In Relays Power Relays Solid State Relays PCB Relays www.magnecraft.com Commitment to Continuous INNOVATION Why Magnecraft? Over
PHASE MONITOR RELAYS Product Summary
Product Summary Phase Monitor Relays provide protection against premature equipment failure caused by voltage faults on 3 Phase systems. All Macromatic Phase Monitor Relays are designed to be compatible
78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
UDC 1000 and UDC 1500 MICRO-PRO SERIES UNIVERSAL DIGITAL CONTROLLERS
UDC 1000 and UDC 1500 MICRO-PRO SERIES UNIVERSAL DIGITAL CONTROLLERS EN0I-6041 12/99 PRODUCT SPECIFICATION SHEET OVERVIEW The UDC 1000 and UDC 1500 are microprocessor-based 1/16 DIN and 1/8 DIN controllers
Quantum III. Compact DC Drive Package. Slitter DC Drive Package. Quantum III
Compact DC Drive Package The delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving design that incorporates many accessories typically required in the North
current sensing relays
2014 catalog a of products current sensing relays 800.238.7474 www.macromatic.com sales@macromatic.com 1 AC OVERCURRENT & UNDERCURRENT CAH, COH & CUH Series current sensing relays encapsulated Monitors
H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300
R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible
Conductive Sensors 2 to 4-point level controller Type CL with teach-in
Conductive Sensors to -point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying
Solving your relay requirements since 1922
SWUDC Series TDR Solid state CMOS digital circuitry Four timing modes: Delay on operate; delay on release; delay on operate & release; and interval or one-shot DPDT (2 form C) isolated 10 ampere relay
Counters, Timers, Indicators Selection Guide
Counters, Timers, Indicators Selection Guide Standard Optional MODEL NUMBER TYPE 7999 Totalizing - Basic A103 -Basic C342 - Basic C346 - Gen Purpose Midrange Squire - Gen Purpose Midrange C628 - High End
Latching, Sequence and Impulse Relays Application Data
Latching, Sequence and Impulse Relays Application Data Energy Conservation Relays In many applications it is important for the customer to conserve electrical energy. One approach to energy conservation
Solving your relay requirements since 1922
Expected Life @ 25 C: 100,000 operations minimum at rated loads Solving your relay requirements since 1922 C Series TDR Solid state analog circuitry Delay on operate timing mode Compact size Relay output
Conductive Sensors 2 to 4-point level controller Type CL with teach-in
Conductive Sensors to 4-point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying
TIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
PROGRAMMABLE MULTI-FUNCTION
PROGRAMMABLE MULTI-FUNCTION DIP-Switch Digital-Set TD-8 Series time delay relays plug-in Sixteen user-selectable modes in one unit DIP-Switches for accurate digital set of time delay & selection of function
Catalog Index Page Description C A Briggs Company -
1 Catalog Index Page Description 1 Catalog Index, page 1 2 Catalog Index, page 2 3 Catalog Index, page 3 4 Catalog Index, page 4 5 Phase Monitor Ordering Information Sheet 6 Phase Monitors, 8 Pin, Plug-In
PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL
PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL TR-6 Series Time Ranger tm INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER SOCKET time delay relays plug-in Each unit has 16 timing ranges
Model 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
Ice Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
MRC 7000 Proven Recording Reliability that Became the Industry Standard!
Data Sheet Recorder//Profiler DESCRIPTION The MRC7000 Recorder/ is a microprocessor based circular chart instrument capable of measuring, displaying, recording and controlling up to two process variables
Introduction Circuit Protection
Introduction Circuit Protection Weidmuller s DIN-rail mounted circuit breakers are available for use in applications where circuit protection must be able to distinguish between circuit overloads and short
Advantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
Mini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
General Purpose Relays R2N/R4N Miniature Power Plug-in Relays
eneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays The Relpol R2N and R4N eneral Purpose Miniature Power Relays, typically called miniature cube type in the industry, offer high reliability and
5.1. Motor Protection and Monitoring. Contents. Product Overview. Monitoring Relays. D64R Series Digital Ground Fault Relays...
.1 Ground Fault Relays and Monitors Contents Description Current.................. Phase................... Voltage.................. Ground Fault Relays and Monitors D64R Series Digital Ground Fault Relays....
7511 / / / 711 / / 731 / Preset 27
22 Timers Timers Electronic 23 7511 / 3410 23 6320 / 720-6300 24 ElectRo-MeCH 25 710 / 711 / 720 25 722 / 731 / 732 26 Preset 27 7932 27 Electronic 23 7511 Series 8 digit self powered LCD electronic timer
Pump-Down Controller MODEL mA Input Scalable 4-20mA Output Duplex Pump Alternation Hand-Off-Auto Controls Dual Run-time Meters
DESCRIPTION Pump-Down Controller Input Scalable Output Duplex Pump Alternation Hand-Off-Auto Controls Dual Run-time Meters The Model 4052 Pump-Down Controller provides total control for duplex pumping
Advantages of the 820 Series Time Delay Relays
Advantages of the 820 Series Time Delay Relays Time Setting Select Between 10 Different Time Scales. Fine Time Setting Ultimate Control in Accuracy. The new 820 Series Time Delay Relays are DIN rail mountable
802B Compact, Precision and Small Precision
02B Compact, Precision and Small Precision Compact Precision Small Precision Description Bulletin 02B consists of different body styles: compact, precision and small precision. Each style has been designed
Ground Fault Protection
Detecting ground fault conditions and protecting sensitive equipment or personnel from harm are where AG Series sensors can help. A compact design eliminates two-piece solutions while options include factory-set
Temperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
H3CA-8H-AC/100/110/120
Solid-State Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay, Repeat
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Analog Data Links Multi-Channel Contact Closures Multiplexers Digital Data Links - Contact Closures Power Supply
TeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
Multi Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
Measuring and Monitoring Relays
Measuring and Monitoring Relays K8AB Series/61F-D21T Industry First! Two SPDT Outputs Available in New Models DIN Sized at 22.5 mm Seven slim models featuring a variety of innovative new functions. Single-phase
JK Series POWER DISTRIBUTION. Solid State Starters Medium Voltage A
POWER DISTRIBUTION JK Series Solid State Starters Medium Voltage 200-400-600-720A SOLID STATE STARTER JKSSS4+ Series The JKSSS Series of motor starter is the result of extensive research and development.
INTRINSICALLY SAFE INSTRUMENTATION FOR HAZARDOUS AREAS
INTRINSICALLY SAFE INSTRUMENTATION FOR HAZARDOUS AREAS SHORT FORM 2002 SERIES D1000 Intrinsically Safe Galvanic Isolators SERIES D1000, for DIN Rail Mounting, provide the most simple and cost effective
Basic Temperature and Limit Controllers
Basic Temperature and Limit Controllers Basic Temperature and Limit Controller Provide Economical Solution for a Wide Range of Applications The basic and limit microprocessor-based controllers from Watlow
Timers. RTE Series. RTE Series Analog Timers. Specifications. G-8 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
Analog Timers Key features of the RTE series include: time ranges and timing functions ON-delay, interval, OFF-delay, one-shot Time delays up to 0 hours Space-saving package (." x." x.0") High repeat accuracy
E-Series General Specifications
-Series General Specifications Ideally suited for higher amperage applications. Available with front and back mounting, screw terminals, stud terminals and heavy duty box wire connectors for solid wire
LC-5 Level Controller & Flow Monitor
The Level Controller and Flow Monitor provides a fully integrated Duplex Controller supporting both analog and discrete (float switch) level detection. The unit allows collecting 'rate of flow' information
ACTIONI/Q Q498. DC Powered DC Input Field Configurable Isolator with Math Functions
ACTIONI/Q Q498 DC Powered DC Input Field Configurable Isolator with Math Functions Q498-0000 Provides 2 Isolated Analog Inputs, 1 Analog Output & 1 Frequency Output, as well as a Discrete Input & Output
KILOVAC WD Series, DIN Rail or Screw Mounted Protective Relays
KILOVAC WD Series, DIN Rail or Screw Mounted Protective Relays n WD25 Paralleling (Synch Check) Relays n WD2759 Over/undervoltage Relays n WD32 Reverse Power Relays n WD47 Phase Sequence Relays n WD5051
TABLE OF CONTENTS Bulletin 700-HA General Purpose Relays and Timing Relays. Description Page Description Page. Description
9 Bulletin 700-HA Bulletin 700-HA 10 A Rating DPDT 3PDT Pin Style Terminals Standard ON/OFF Flag Indicator Finger Grips for Easy Installation and Removal Optional Manual Operator Optional Pilot Light Optional
MICROFUSION FEATURES OPTIONS CERTIFICATIONS (PENDING) THREE PHASE SCR POWER CONTROLLERS
MICROFUSION THREE PHASE SCR POWER CONTROLLERS FEATURES Auto-Ranging Input Voltage 24-600 VAC, 45-65 Hz AC Output 16, 32, 50, 80 Amps (@ 50 C 6000 ft) Control Features Microprocessor-based controller /
NEUROLOGIC RESEARCH CORPORATION MODEL 2500
NEUROLOGIC RESEARCH CORPORATION MODEL 2500 NETWORK HUMISTAT Compact, self-contained dehumidifier controller. 0.5 degrees C accuracy typical. RH sensor is digitally calibrated for 2% accuracy. Open communication
BNS SERIES - COMPATIBLE SERIES AES SAFETY CONTROLLERS SELECTION CHART AVAILABLE STANDARD MODELS
BNS SERIES - COMPATIBLE SERIES AES SAFETY CONTROLLERS SELECTION CHART AVAILABLE STANDARD MODELS Safety Controller Suitable for use with Coded-Magnet Sensor Part Numbers below BNS250... BNS33... BNS303...
For full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Monitoring Relays For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Dual-Channel Safety Monitoring Relay Power
Bulletin 700-HA Tube Base Relay
Bulletin 700-HA Tube Base Relay Bulletin 700 HA Tube Base Relay 10 A contact rating DPDT, 3PDT Pin-style terminals Standard ON/OFF flag indicator Options: LED, push-to-test and manual override, socket-mounted
Level-Lance Model 5400A
Sales Manual Section 100 PRODUCT SPECIFICATION 5400A GENERAL DESCRIPTION The ROBERTSHAW Level-Lance Model 5400A is a microprocessor based, multi-point On-Off capacitance type level detection system. Utilizing
Motor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
MAXIMA + Series ROTARY LEVEL CONTROL
Price $5.00 MAXIMA + Series ROTARY LEVEL CONTROL OPERATING INSTRUCTIONS PLEASE READ CAREFULLY Division of Garner Industries 7201 North 98th Street Lincoln, NE 68507-9741 (402) 434-9102 925-0268 TABLE OF
Safety Monitoring Relays
Safety Monitoring Relays Contents Selection Guide I-2 Safety Monitoring Relays G9SA I-6 SR101A I-12 SR103AM I-13 SR104P I-17 SR105E I-17 SR106ED I-21 SR108AD & SR109AD I-18 SR120MP I-21 SR125SMS45 I-22
Advant OCS. The Compact and Cost Effective Advant Controller. Advant Controller 210. Open Control System
Advant OCS Open Control System Advant Controller 210 The Compact and Cost Effective Advant Controller Advant Controller 210 is a small, cost-effective system belonging to the Advant Controller family.
1 Description. 2 Specifications. Product Installation Document. Honeywell 12 Clintonville Road Northford, CT
Honeywell 12 Clintonville Road Northford, CT 06472 http://www.honeywellpower.com HP600ULACM4CB HP600ULACM8CB Access Control Power Supply/Charger with Power Distribution Controller PN 52395:A 1/05/06 ECN
NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER
time delay relays plug-in NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER Onboard & remote adjustable or fi xed time delays from 0.05 seconds to 2 hours Uses industry-standard 8 pin octal
Motor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
I-7520: RS-232 to RS-485. Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, auto switching baud rate, 300~ BPS
I-7520 RS-232 to RS-485 Converter I-7510 RS-485 Repeater RS-232 RS-485 I-7000 SERIES Common Specifications Isolation voltage: 3000VDC Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115000 Dual watchdog
SMARTSTART MOTOR STARTERS
SMARTSTART MOTOR STARTERS MCG WWW.MCG-USA.COM 1 AT A GLANCE Covers all line voltages from 200-600V AC, single or three phase Transformer supplies a 24V AC coil voltage, no matter the line voltage 12V AC/DC
Product Discontinuation Notices. Discontinuation Notice of open-circuit time delay relay RD2P-30
PRODUCT NEWS Product Discontinuation Notices March 1, 2012 Timers No. 2012082E Discontinuation Notice of open-circuit time delay relay RD2P-30 Product Discontinuation Open-circuit time delay relay Recommended
Basic Temperature and Limit Controllers. Provide Economical Solution for a Wide Range of Applications SPECIFICATION SHEET
SPECIFICATION SHEET Basic Temperature and Limit Controllers Basic Temperature and Limit Controllers Provide Economical Solution for a Wide Range of Applications The basic and limit microprocessor-based
TIME DELAY RELAYS TR-6 SERIES Time Ranger TM Programmable Multi-Range Plug-in Off Delay, Single Shot & Watchdog
TR-6 SERIES Time Ranger TM Programmable Multi-Range Plug-in Off Delay, Single Shot & Watchdog INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER SOCKETS OFF 120V AC/DC TR-61622 11 PIN OCTAL Control
Section 4 Ground-Fault Protection Devices
Multi 9 System Catalog Section 4Ground-Fault Protection Devices Section 4Ground-Fault Protection Devices Selection Table The Multi 9 System includes one UL Listed and three IEC rated product families that
ATS22D75S6U. Main. Range of product Altistart 22. Component name. Factory setting current. Utilisation category. IP degree of protection
Product datasheet Characteristics ATS22D75S6U Complementary Assembly style Function available Supply voltage limits Main Range of product Altistart 22 Product or component type Product destination Product
Square D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
MODELS DPDT DPDT DPDT-60MS DPDT-60MS
INSTALLATION INSTRUCTIONS Revision B1 Rapid City, SD, USA, 03/2010 MODELS 201-100-DPDT 201-200-DPDT 201-100-DPDT-60MS 201-200-DPDT-60MS II_201-XXX-DPDT_B1 II-201-DPDT-B BE SURE POWER IS DISCONNECTED PRIOR
ALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
PC-200-LLC-GM INSTALLATION INSTRUCTIONS. Revision A1 Rapid City, SD, USA, 10/2009 II_PC-XXX-LLC-GM_A1
INSTALLATION INSTRUCTIONS Revision A1 Rapid City, SD, USA, 10/2009 MODELS PC-100-LLC-GM PC-200-LLC-GM II_PC-XXX-LLC-GM_A1 2880 North Plaza Drive, Rapid City, South Dakota 57702 (800) 843-8848 (605) 348-5580
NON-PROGRAMMABLE OFF DELAY, SINGLE SHOT
time delay relays plug-in NON-PROGRAMMABLE OFF DELAY, SINGLE SHOT & WATCHDOG 8 Pin SPDT Versions TR-5 Series These are 8 pin 10A SPDT versions of our standard 11 pin DPDT products Onboard & remote adjustable
REQUIREMENTS FOR WIRELESS, WEB-BASED MONITORING EQUIPMENT AND SERVICES FOR PUMP STATION APPLICAITONS
REQUIREMENTS FOR WIRELESS, WEB-BASED MONITORING EQUIPMENT AND SERVICES FOR PUMP STATION APPLICAITONS MANUFACTURER REQUIREMENTS The Manufacturer of the equipment and provider of related services shall provide
Carbon Monoxide (CO) Gas Detection and Control System
Carbon Monoxide (CO) Gas Detection and Control System DESCRIPTION Gas monitor with built-in carbon monoxide (CO) sensor, wall-mounted, accepts inputs from remote devices such as other gas sensors, temperature
Line A. Inverse parallel scrs. Load a FUSION. Line B SCR POWER. O delta CONTROLLERS. Line c. inverse parallel scrs. Load C. FUSION Brochure Rev 3.
Line A Inverse parallel scrs Load a Line B FUSION SCR POWER O delta CONTROLLERS Line c inverse parallel scrs Load C FEATURES Auto-Ranging Input Voltage 24-600 VAC, 45-65 Hz AC or DC Output AC Models: 50-1200
T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC.
Industrial Automation Catalog Section - U906 imers Selection uide iming Diagrams Overview RE Series Analog imers Instructions imers For up-to-date information, or to request a full copy of this catalog,
Solid State Relays and Timers Family
Solid State Relays and Timers Family Vehicle Control Modules Waytek Stock No. Volt Rating Amp Rating Notes Dual Input Relay Activating either Input A or Input B sets output. 75532 12 15 Dual inputs Latching
CurrentWatch Current Sensors. EGF Series Ground Fault Sensors. Ground Fault Sensors with Solid-State or Mechanical Relay Outputs.
CurrentWatch Current Sensors Ground Fault Sensors with Solid-State or Mechanical Relay s 1 Contents Overview.................... 1 Model Selection, Switches...... 2 Model Selection, Accessories... 3 Wiring
MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD
United States MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD Product Information Features and Specifications For Use With: OEM Panels Approvals: UL
Timing tasks get everything from one source NEW: LED timer tico 742. Electronic Timer family. tico
iming tasks get everything from one source NEW: LED timer tico 7 Electronic imer family tico tico 70 7 Multi-function timer family tico 70 tico 71 tico 7: NEW! General information Variety of applications
Schneider Electric Legacy Time Delay and Sensor Relays. Catalog
Schneider Electric Legacy Time Delay and Catalog 0 Contents Series Overview... 0 Series Relays.... Series Voltage Sensing Relays... Series Current Sensing Relays...0 00 Series Accessories.... TDR Series
New 30AA and 31AA Electronic Motor Protection Modules. Application Bulletin 128
New 30AA and 31AA Electronic Motor Protection Modules Application Bulletin 128 Application Bulletin Number: 128 Release EN: D09910 Date: 4/19/96 Revision EN: Z27301 Date: 10/2/15 Subject: New 30AA and
TABLE OF CONTENTS INTRODUCTION. 3. Analog Input Analog Output Digital Input Digital Output OPERATIONAL DESCRIPITON.. 7 PROGRAMMING AND INITIAL SETUP.
DIVERSIFIED HEAT TRANSFER SERIES 700 STEAM GENERATOR CONTROLLER INSTRUCTION MANUAL VISIT OUR WEBSITE AT SIGMACONTROLS.COM SERIES 700 DHT STEAM GENERATOR MANUAL 042514 2 TABLE OF CONTENTS INTRODUCTION.
Model Selection Guide for Timers. H3 and H5 Series
H3 and H5 Series Table of Contents Basic Selection Information for Timers Timer s Advantage 3 Basic Configuration of a Timer 4 Basic Operation of a Timer 5 Model Selection Guide for Timers Recommended
MICRO SERIES PROCESS DISPLAYS LARGE DIGIT MODELS
The MICRO SERIES PROCESS DISPLAYS LARGE DIGIT MODELS Mighty-5 DPM MODELS Micro-P & Mighty-1 Mighty-1 Micro-P ELECTRO-NUMERICS, INC. Introduction The Electro-Numerics family of Digital Panel Meters and
Magnecraft Time Delay and Sensor Relays. Catalog
Magnecraft Time Delay and Catalog 0 Contents Magnecraft Time Delay and Series Overview... 0 Series Relays.... Series Voltage Sensing Relays... Series Current Sensing Relays...0 00 Series Accessories....
Motor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
PC2004 PRESSURE CONTROLLER
PC CTROLLER FRT PANEL Digital Display & Display Selector Switch The Display Selector Switch has five positions: PRESS Displays the pressure sensed at the transducer. INT SP Displays the INTERNAL SETPOINT
TIMERS FOR ALL APPLICATIONS
Fuji 1/1 DIN Super imers Overview IMERS FOR ALL APPLICAIONS AutomationDirect now offers solid-state timers brought to you by two leaders in the industry, FUJI and Koyo. FUJI Electric has been in business
TURCK Process Automation IS Interface Technology. Interface Modules. IM Series Cabinet
Process Automation IS Interface Technology Interface Modules TURCK's IM series of Isolating Intrinsically Safe Barriers is designed to be a simple and safe way to solve the problems associated with the
APPLICATION GUIDE. Interface Modules IM Series.
Interface Modules IM Series APPLICATION GUIDE www.turck.com Interface Technology Interface Modules TURCK's IM series of Isolating Intrinsically Safe Barriers is designed to be a simple and safe way to
Monitoring technique. VARIMETER Voltage relay MK 9064N, MH 9064
Monitoring technique VARIMETER Voltage relay MK 9064N, MH 9064 0269462 Your Advantages Preventive maintenance For better productivity Quicker fault locating Precise and reliable Min-, Max. value or window
900-4RL Option Board. Refer to installation instructions for compatible supply models - PS902, PS904, PS906, and PS914. Note
*44487080* 44487080 DANGER To avoid risk of electric shock, turn off AC power to power supply before installing or wiring option board. 900- Option Board Installation Instructions 900- Specifications Inputs
Solid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket
Solid-state Timer Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating modes. Conforms
Manual. Water Vend Controller Model ESDI WARNING! ELECTRICAL SHOCK HAZARD! AUTHORIZED PERSONNEL ONLY. EXPOSED 120 VAC ON CIRCUIT BOARD
Manual Water Vend Controller Model ESDI 030400 WARNING! ELECTRICAL SHOCK HAZARD! AUTHORIZED PERSONNEL ONLY. EXPOSED 120 VAC ON CIRCUIT BOARD THE CIRCUIT BOARD HAS MANY EXPOSED AREAS THAT ARE AT 120 VAC.
MODCELL 2050R Single Loop Controllers
Isolated universal process and remote set-point input Four internal set-points No jumpers required to define instrument parameters Ratio/bias on process and remote set-point Totalizer Ramp/soak profile