Product information. Modules of the series AMI in front-door stations. for flush-mount kits ZAU200x and communication posts K3xxxx
|
|
|
- Philomena Wilcox
- 5 years ago
- Views:
Transcription
1 Product information Modules of the series AMI in front-door stations for flush-mount kits ZAU200x and communication posts K3xxxx Fax:+49 (0) /
2 2 01/2013 Table of contents Scope of delivery... 3 Flush-mount kit ZAU200x... 3 Communication post K3xxxx... 3 Safety instructions... 4 General safety regulations... 4 Installation protective measures... 4 Intended use... 4 Flush-mount kit... 4 Communication posts... 4 Endangering when used intended... 4 Module descriptions... 5 Installation positions for modules in a front-door station... 5 Technical data... 6 Modules (except display module)... 6 Flush-mount kits ZAU200x... 6 Communication post K3xxxx... 7 Install the modules... 8 Installe modules into the front panel (standard)... 8 Installe modules into the front panel (special design)... 9 Installation flush-mount kit ZAU200x... 9 Installation flush-mount box... 9 Installation of the front-door station (front panel) Installation communication post K3xxxx Fix the post on the ground with heavy-duty anchor with ground anchor Dismount the post roof Open the post Dismount / installe the front panel Connect the post Connect the post Close the post roof Connect the lines Commissioning Note for the connexion of more than one front-door station General information on the conduit in TCS systems TCS audio systems Principle loop resistance Measurement loop resistance TCS video systems wire operation Optional accessory Cleaning Conformity Information on disposal Warranty Notizen Service... 20
3 01/ Scope of delivery Product information Modules of the series AMI in front-door stations Flush-mount kit ZAU200x 1x front panel incl. flush-mount box 1 x front panel sealing 3 x 9 mm with assembly instruction 1 x allen key / 6 / 8 x countersunk screw (= number of drill holes) with hexagon socket and Pin, DIN 7991 Communication post K3xxxx 1 x communication post 4 x heavy duty anchor W-TM M10, 4 x cylinder screw with hexagon socket DIN 912 M10x75 1 x gripper ISO clip (pluggable top) 1 x key for hexagon socket screws DIN 911, SW x screwdriver with round-handle
4 4 01/2013 Safety instructions General safety regulations! Attention! Mounting, installation, commissioning and repair of electronic devices have to be carried out only by qualified electricians. Thus, the current standards for the installation of door communication systems must be observed. When working in systems with 230 V mains voltage, the safety regulations according to DIN VDE 0100 must be observed. When installing TCS:BUS systems, the general safety regulations for telecommunication systems according to VDE 0800 must be observed. Inter alia: separated cabling of heavy and low current lines, minimum distance of 10 cm for common cabling, use of separators between heavy and low current lines in shared cable ducts, use of standard telecommunication lines, e.g. J-Y (St) Y with 0.8 mm diameter, existing lines (modernisation) with deviating cross sections can be used in compliance with the loop resistance. Installation protective measures! With suitable requirements to protect against lightning, it has to be ensured that a voltage of each 32 V DC is not to be exceeded at the connections a, b, P, R, S, V1, V2. All front-door stations and modules are permitted for safety extra low voltage (SELV) and protective extra low voltage (PELV) only. Intended use Front-door stations of the series AMI can be assembled individually with functional modules. The modules have to be used in combincation with a flush-mount kit (ZAU200x) or a communication post (K3xxxx). Other forms of installation must meet protection class IP44 at least. Flush-mount kit Modular front-door stations of the series AMI are front panels with flush-mount box. Communication posts The communication posts are stand-alone front-door stations constructed as posts. The posts are suitable for a vertical installation outdoors and need to be installed on even, massive ground (e.g. concrete) Possible hazards when using the device The operating elements of the modules in the front-door stations can get very hot when placed in direct solar radiation (more than +50 C). If possible, avoid direct solar radiation when selecting the mounting site.
5 01/ Module descriptions Installation positions for modules in a front-door station Please find further information on each module in the product datasheet Modules of the series AMI on the internet under Product planning. Functional group with display module AMI10200 AMI10100 AMI10103 AMI10105 AMI10300 AMI10400 loudspeaker module display module LCD graphic, 100 flats display module LCD graphic, 200 flats display module LCD graphic, 1000 flats keypad module jogwheel module Functional group with built-in door loudspeaker when arranged vertically the modules will be combined as follows: Loudspeaker module (above) Display module (below resp. next to the loudspeaker module) Keypad or jogwheel module (below resp. next to the display module) when arranged vertically AMI11100 built-in door loudspeaker module above the bell button module AMI10901 AMI10902 AMI10903 AMI10904 Access control AMI11200 AMI12300 bell button module, 1 button bell button module, 2 buttons bell button module, 3 buttons bell button module, 4 buttons code lock module transponder reader module AMI10800 fingerprint scanner module * Additional modules below resp. next to the built-in door loudspeaker, jogwheel, keypad and display module when arranged vertically below keypad, jogwheel, bell button and illumination module or as stand alone device when arranged vertically AMI11000 blind module installation as placeholder, reserve AMI10500 camera module * above loudspeaker, built-in door loudspeaker module AMI10600 dome camera module and below the information module AMI11300 information module always arranged on top AMI11400 illumination module above keypad, jogwheel, codelock and transponder reader module AMI10700 key switch module always aranged below * Note: Recommended mounting height fingerprint scanner: at least 1.30 m. Recommended mounting height camera: 1.60 m.
6 6 01/2013! Subject to technical changes! The here mentioned module arrangements are a recommendation of the TCS TürControlSysteme AG and are to guarantee the functionality of the modules. When of an individual arrangement of the modules is required, cable lengths have to be considered which may be customised items. We recommend to arrange the modules in the same order horizontally as vertically. The positioning of the modules can be started from both sides. Technical data Modules (except display module) dimensions, visible front panel H x W module grid spacing degree of protection at the front panel when modules are installed correctly 82 x 82 mm 120 mm at least IP44 Flush-mount kit ZAU200x supply voltage front panel flush-mount box dimension and weight +24 V ± 8 % (power supply and control unit) stainless steel, grinded steel, zink-coated article front panel flush-mount box weight H x W x D in mm H x W x D in mm In total in g ZAU x 200 x x 180 x ZAU x 200 x x 180 x ZAU x 200 x x 180 x ZAU x 200 x x 180 x ZAU x 200 x x 180 x ZAU x 200 x x 180 x ZAU x 320 x x 300 x ZAU x 320 x x 300 x audio system: 3-wire technique necessary! video system: 6-wire technique necessary!
7 01/ Overview grinding direction Communication post K3xxxx supply voltage housing front panel H x W x D empty weight +24 V ± 8 % (power supply and control unit) aluminium profile, powder-coated, micaceous iron ore dark grey aluminium, anodised nature 1700 x 225 x 225 mm optionally H = 1300 or 2600 mm (customised item on request) 13 kg audio system: 3-wire technique necessary! video system: 6-wire technique necessary! Short description Communication posts K31xxx to K36xxx are realised with a standard height of 1700 mm. They can be assembled with a maximum of 6 functional modules of the series AMI.
8 8 01/2013 Overview 1700 mm 8 mm 172 mm 226 mm 30 mm 192 mm post cover, top view ground plate, from below Installation of the modules Installation of the modules into the front panel (standard) The modules are suited for the installation into the front panels of the flush-mount kits ZAU200x and K3xxxx with a thickness of 3 mm. Put the module unit (1) with front panel sealing (2) from behind onto the welded bolts at the front panel. Fix the module unit with 4 fastening screws (3) (enclosed in the delivery). weldet bolt M4 front panel front panel post front panel ZAU Recommendation: Wire the modules (see product information of the specific module), before installing the front panel into the post or the flush-mount kit.
9 01/2013 9! Installation display module AMI1010x see product information Functional group with display module > installation, page 8. Installation of the modules into the front panel (special design) When using a thinner front panel (1.5 to 2.5 mm) the thickness must be increased to 3 mm spacer (enclosed in the delivery when modules are ordered individually) Put 1 to 3 spacer foils (2) from behind on the front panel onto the welded bolts (1). Put on the module unit (4) with the front panel sealing (3). Fix the module unit with 4 fastening screws (5) (enclosed in the delivery). Installation flush-mount box Installation flush-mount kit ZAU200x rear view drilling for lock screws cable gland Loosen the lock screws with the enclosed allen key and remove the front panel from the flush-mount box. Insert the supply cable through the cable gland into the flush-mount box and fasten it. Insert the flush-mount box into the prepared wall niche. Note: The flush-mount box must be flush with the wall of the house.! Not enclosed: Screws and dowels to fix the post in the wall niche.
10 10 01/2013 Installation of the front-door station (front panel) front panel sealing Cut the enclosed front panel sealing for the front-door station to length: first cut the upper, then the stripes for the sides. Stick the cutted front panel sealing with small distance to the outer edge onto the front panel.! The lower side stays free and prevents water from condensing within the system! rear view countersunk screw Screw the front panel with lock screws using the allen key onto the flush-mount box. Thus, the front panel sealing is compressed and provides an adequate sealing against external influences. Installation communication post K3xxxx The installation is realised on a concrete foundation (or ground anchor) provided by customer with heavy-duty anchors (enclosed in the delivery).! Please ensure that there is free space for the installation at the backside of the communication post on the installation site. We recommend to provide a cable length of 1 m on site. Fix the post to the ground! Ensure that a line is available to the functional earth.
11 01/ with heavy-duty anchor with ground anchor post corpus cheese-head screws M10x75 base plate heavy-duty anchor cheese-head screws M10x30 (encluded in the delivery ground anchor) ground anchor Use the base plate of the post as stencil to mark the drill holes. Drill and clean drill holes. Drive the heavy-duty anchor flush into the foundation. Insert the connection cable provided by customer as well as the earthing through the base plate of the post. Concrete the ground anchor vertically in the ground, concrete height 20 mm below the upper edge of the ground anchor. Remove the protection caps. 20 mm distance concrete height Insert the connection cable provided by customer as well as the earthing through the ground anchor and the base plate of the post. Fix the base plate with 4 cheese-head screws with a key for hexagon socket screws 8 mm (not enclosed in the delivery / length of the screws see the illustration above).! Ensure that the connection cable provided by customer is not clamped or damaged! Dismount the post roof countersunk screw post roof Loosen and remove the 4 countersunk screws in the post roof with the enclosed allen key. Remove the roof of the post. Put down the roof on clean ground. Open the post upper back panel Loosen the two knurled screws which are located on top in the inside of the post corpus. Push out the upper back panel. knurled screw profile
12 12 01/2013 lower back panel knurled screw Loosen the two knurled screws which are located at the inside of the post corpus, directly above the hollow wall boxes. Push out the lower back panel. hollow wall box profile Dismount / install the front panel knurled nut front panel knurled screw with spacer bolt Screw off the knurled nuts and knurled screws with spacer bolts (location of the modules). Remove the front panel of the post corpus to install the modules.! In the middle part of the front panel of a post with up to 3 modules, there are 2 knurled screws with spacer bolts, and in case of 4, 5 or 6 modules 4 knurled screws with spacer bolts which needs to be loosened / tightened. For the installation of modules into the front panel see Installation of the modules into the front panel (standard), page 8. Put on the front panel with the assembled modules onto the post corpus and fix it again from the inside using the knurled nuts and knurled screws with spacer bolts.
13 01/ Connect the post Back view hollow wall box connection terminals gripper-iso-clip, lower part Break out an opening in one of the hollow wall boxes for the supply cable. Guide the supply cable through the opening to the connection terminals and fix it with the pluggable top part of the grippe-iso-clip (encluded in the delivery). Connect the wires to the connection terminals according to the type label. Connect the provided to the connection terminal functional earth. earth clamp supply cable Close the post See also Open the post, page 11. Put the rear back panel into the post profile, align it and fix it with both knurled screws from the inside. Put the upper back panel into the post profile, align it and fix it the same way. Close the post roof countersunk screw rubber ring post roof Put the roof of the post with the rounded part forward on the post corpus. Fix the roof of the post with the 4 countersunk screws and rubber rings using the allen key.
14 14 01/2013 Connect the lines! All modules are permitted exclusivley for safety extra low voltage (SELV) and protective extra low voltage (PELV). Commissioning First install the system completely, than connect it to voltage! Check the a-, b- and P-wire against each other for short-circuits. Switch on the power supply. Note on the connection of more than one front-door station In a system with a voltage supply realized by a single DC power supply NGV , max. 5 front-door stations with display modules can be connected. If a front-door stations with modules is operated parallel to other front-door stations with modules, their AS-addresses must be fix. The setting can only be realised with the Service Device TCSK-01 or the configuration software configo TM. Setting the AS-address of a front-door station when using a display module is realised with a PS/2 keypad via the menu navigation, with the Service Device TCSK-01 or the software ADx-configurator.
15 01/ TCS audio systems General information on the conduit in TCS systems The conduit of the lines is determined by structural conditions and is only limited by its length. Observe when selecting the cable length: the loop resistance must not exceed 20 Ω (table) To keep the max. permitted loop resistance, the wire cross section can be doubled, that means, that for one wire two cables are used (illustration). The lines have to be twisted. When using shielded cables: Connect the shielding with each other and put it on mass (b-wire) on one side at the power supply. Optional strand or star shaped wiring. Table: loop resistances Line length in m Line diameter 0.6 mm 0.8 mm Loop resistance in Ω Principle loop resistance None of the devices (front-door station, indoor station or extended function) should be further than 20 Ohm away from the power supply and control unit! Measurement loop resistance Procedure for measurement: Switch off the 230 V / 50 Hz power supply and control unit. Install a/b short circuit at the power supply and control unit. Other devices are not disturbing the measurement and can stay connected. Measure the resistance at the strand at a/b of the last indoor or front-door station.
16 16 01/2013 Rule for 20 Ohm: Distance from TCS:BUS power supply to the most distant front-door or indoor station: at 0.6 mm wire diameter max. 160 m, at 0.8 mm wire diameter max. 280 m TCS video systems 6-wire operation The 6-wire operation is standard operation mode. Video operation, where two separated masses (b and M) are used. The conduit of the lines is determined by structural conditions and is only limited by its length. Observe when selecting the cable length: the loop resistance must not exceed 8 Ω at a-b and M-P (table 1). In case of loop resistance > 8 Ω: plan mulitple wiring of the strands (double twisted lines). Optional strand or star shaped wiring. Do not use more than 20 video indoor stations per strand. For systems with more video indoor stations you have to provide video distributors (FVY1200, FVY1400). Up to 64 front-door stations (16 of them video front-door stations) and almost an unlimited number of indoor stations can be connected within one system polarity-free (a/b polarity-free only in 6-wire operation). Thus, a suitable power supply and control unit is to be selected. Table 1: loop resistances Line length a-b/ M-P Line diameter in m 0.6 mm 0.8 mm Loop resistance in Ω
17 01/ Principle loop resistance None of the devices (front-door station, indoor station or extended function) should be further than 8 Ohm away from the power supply and control unit! Measurement loop resistance Procedure for measuring: Switch off the 230 V / 50 Hz of the power supply and control unit. Install a/b short-circuit at the power supply and control unit. Other devices are not disturbing the measurement and can stay connected. Measure the resistance at a/b at the strand of the last indoor or front-door station. Remove the short-circuit. To measure the loop resistance at P/M proceed in the same way as for a/b. Rule for 8 Ohm: Distance from TCS:BUS power supply to the most distant front-door or indoor station: at 0.6 mm wire diameter max. 65 m, at 0.8 mm wire diameter max. 115 m Optional accessory Short text name field foil colored foil red, green, blue, orange cleaning cloth for stainless steel ZAB ground anchor K3 post Article number on request on request on request ZAB If necessary, you can order accessory by calling the TCS Hotline under +49 (0) 4194 / or by mailing to hotline@tcsag.de
18 18 01/2013 Cleaning The material of your front-door station needs regular maintenance to preserve the surfaces.! To clean the device use a slightly wet microfibre cloth. Remove stronger stains with a mild household cleaner and warm water. Do not use any abrasive detergents! When using standard stainless steel cleaner, please observe the instructions for use carefully. Acrylic glass To preserve the dust-resistant effect for a long time, we recommend to clean the plastics with an antistatic plastic cleaner. Aluminium The anodised surfaces can be cleaned with light detergents. The surfaces have a self-cleaning effect in their texture. Especially fingerprints and grease residues can react aggressively on surfaces of stainless steel. Regular maintenance preserves the look of your front-door station and makes the repeated cleaning of the surface easier. Stainless steel polished surfaces grinded / brushed surfaces In case of polished surfaces, cleaning products such as scouring milk, steel wool or similar products with grinding particles must NOT be used. In case of grinded or brushed surfaces, the cleaning should always be carried out in grinding resp. brushing direction to preserve the optical grinding pattern. After the cleaning, the stainless steel surfaces should always be rubbed dry to remove water spots or residues from cleaning detergents.
19 01/ Conformity The declarations of conformity are available under > Downloads > trade information. Information on disposal The adjoining symbol shows, that the device has to be disposed separately from domestic waste. The materials used are recyclable. Please do help protecting our environment and dispose the device via a collection point for electronic scrap. Dispose the parts of the packaging in collecting tanks for cardboard and paper resp. plastics. Warranty We offer a simplified processing in case of warranty for electricians. Please note our conditions of sale and delivery, download from > Downloads > trade information. Notes
20 20 01/2013 Service Please send your questions and inquiries to Headquarters TCS TürControlSysteme AG Geschwister-Scholl-Str. 7, D Genthin, Germany Phone +49 (0) , Fax +49 (0) , Mail
Product information PTZ camera interface FBI
Product information PTZ camera interface FBI4500-0100 TCS TürControlSysteme AG, TCS Hotline: +49 ( )0 41 94 / 98 81 188 FAX: 0 41 94 / 98 81 29 Mail: hotline@tcsag.de PI_FBI4500-0100.doc 2A 2 11/2012 Table
Product information combined device with binary input / output, single BRE2-EB
General safety regulations! Product information combined device with binary input / output, single -EB Safety instructions Attention! Mounting, installation, commissioning and repair of electronic devices
Front-door station series for surface-mounting Profi-Economic PES Profi-Design PDS
Product information Front-door station series for surface-mounting Profi-Economic PES Profi-Design PDS PI_GB_PES_PDS_Art0015689_1v0.doc 2 10/2005 In Table of contents Scope of delivery...3 Safety notices...3
User manual Video indoor station IVX
User manual Video indoor station IVX9001-0140 Table of contents Safety instructions... 3 Device overview... 3 Indicastion and operating elements... 4 Operation... 5 Accept a call... 5 Send a call... 7
Product information. video indoor station ecoos IVW
Product information video indoor station ecoos IVW2211-0140 2 Table ofcontents Scope of delivery... 5 Safety instructions... 5 Installation protective measures... 5 Terms... 6 Technical data... 6 Device
Product information. Video indoor station sky IVW x
Product information Video indoor station sky IVW2221-015x 2 Table of contents Scope of delivery... 3 Safety instructions... 4 General safety regulations... 4 Installation protective measures... 4 Terms...
Product Information. DCM Standard indoor stations TK IS A 514 A.. TK IS A 514 AD.. (Design)
Product Information DCM Standard indoor stations TK IS A 514 A.. TK IS A 514 AD.. (Design) ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle Phone +49.2355.806-0 Fax +49.2355.806-189 E-Mail:
Product information Maintenance package USB FBI1210-0
Product information Maintenance package USB FBI1210-0 Subject to technical changes FAX: +49 (0) 41 94/ 9 88 129 Mail: info@tcs-germany.de PI_FBI1210_uk 1A mi 2 02/2013 Scope of delivery 1 x PC Service
Product information IP Video Streamer FBI6110
Product information IP Video Streamer FBI6110 2 03/2013 Table of contents Scope of delivery... 3 Safety instructions... 3 General safety regulations... 3 Installation protective measures... 3 Terms...
Outdoor PTZ. Mounting on the Ceiling Using Pendant Mount. Installation Guide. For Models: I93, I94, I95, I96, KCM /12/03
Outdoor PTZ Mounting on the Ceiling Using Pendant Mount For Models: I93, I94, I95, I96, KCM-8211 2013/12/03 Table of Contents Mounting Solutions... 3 Straight Tube Installation Procedures... 4 Step 1:
duplex communication (with handset) hands-free talking simplex communication can be activated standard 4 (up to 2 from front-door stations)
Page 1/6 home:packs for the one- and two-family house with comfort functions Types of packages PSC2110-0000 for the one-family house, duplex communication 1 x ISH3130-0140 1 x PAK (surface-mount) 1 x power
sky Instruction manual IVW2221 BRUsky-S version 1.0
-S Instruction manual H:\Dokumenter\02 PB Scantron dørtelefoni\05 Hustelefoner\Sky\Arbejdsfiler for Sky TM sky Video indoor station with digital 8.9 cm (3.5 ) TFT display for surface-mount, in anodised
ZC-OH5 TAMPER-RESISTANT INDOOR/OUTDOOR HOUSING INSTRUCTION MANUAL FOR USE WITH GANZ ZC-D5000 SERIES MINIDOME CAMERAS
ZC-OH5 TAMPER-RESISTANT INDOOR/OUTDOOR HOUSING INSTRUCTION MANUAL FOR USE WITH GANZ ZC-D5000 SERIES MINIDOME CAMERAS Please carefully read and observe all instructions and warnings contained in this manual
TECHKNOW, INC. Kiosk Order Confirmation System INSTALLATION MANUAL. Revision Date: July 11, 2012 Part # Version 3.2
document Page 1 of 18 TECHKNOW, INC Kiosk Order Confirmation System INSTALLATION MANUAL Revision Date: July 11, 2012 Part # Version 3.2 Techknow, Inc. 393 Mayfield Road Duncan, SC 29334 www.gotechknow.com
AGATA C200 UK A/200N TARGHA 200. Installation Manual AGATAKIT C 200 UK
TARGHA 200 A/200N AGATA C200 UK Installation Manual AGATAKIT C 200 UK 24806770/28-05-2013 AGK200C03UK HPC/1 AGATA C200 UK AG2K200C03UK HPC/2 HA/200 HBP AG3K200C03UK HPC/3 A/200N AGK200C03HNA HPC/1+HNA
Display Panel BAT 100 LSN. en Operation Guide
Display Panel BAT 100 LSN en Operation Guide Display Panel Table of Contents en 3 Table of contents 1 Safety 4 2 Short information 4 3 System overview 5 4 Installation 6 5 Connection 11 6 Maintenance
FortiCam FD40 Mounting Guide
FortiCam FD40 Mounting Guide 1 FORTINET DOCUMENT LIBRARY http://docs.fortinet.com FORTINET VIDEO GUIDE http://video.fortinet.com FORTINET BLOG https://blog.fortinet.com CUSTOMER SERVICE & SUPPORT https://support.fortinet.com
Mounting on the Ceiling Using Flush Mount (Face Down)
Mounting on the Ceiling Using Flush Mount (Face Down) Installation Guide 2014/02/14 Table of Contents Safety Information... 3 Installation Procedures... 5 Step 1: Drill a Hole on the Ceiling... 5 Step
IS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
Full HD Speed Dome IP Camera
Full HD Speed Dome IP Camera Installation Guide Indoor / Outdoor Ver. 1.6 Preface The information given in this manual was current when published. The company reserves the right to revise and improve its
Quick Start Guide. 2MP 4X PTZ IP Camera O2P4X
Quick Start Guide 2MP 4X PTZ IP Camera O2P4X Version 1.0.1 Table of Contents 1 DEVICE CHECK... 1 1.1 Check Accessories... 1 1.2 Check Device... 1 1.3 Installation Template... 1 1.4 SD Card Slot and Reset
IR Varifocal IP66 Weatherproof Cameras
IR Varifocal IP66 Weatherproof Cameras Products: CFC6067VF, CFC6067VF2 Please read this manual before using your camera, and always follow the instructions for safety and proper use. Save this manual for
SolConeX Wall-Mounted Socket, 16 A
SolConeX Wall-Mounted Socket, 16 A Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information Regarding the
LaserLyte-Flex Red & Green Alignment System
LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly
Mounting and Operating Instructions of RP406K and RP406K-IC for mobile video surveillance
Mounting and Operating Instructions of RP406K and RP406K-IC for mobile video surveillance 12 / 2005 Foreword Dear customer, By selecting a product from Verint Video Solutions GmbH you have purchased a
XENO 8. User & Installation Manual.
XENO 8 User & Installation Manual www.audac.eu 2 Introduction 8 Full range loudspeaker cabinet The XENO series is a loudspeaker range specifically designed for fixed audio installations in modern environments,
Explosion proof UL certified VoIP telephone. FernTel IP Z2 UL. Tabletop unit. Manual FHF BA /12
Explosion proof UL certified VoIP telephone FernTel IP Z2 UL Tabletop unit Manual FHF BA 9620-51 09/12 BA 9620-51 09 /12 FernTel IP Z2 UL Manual Brand names are used with no guarantee that they may be
FortiCam SD20 Mounting Guide
FortiCam SD20 Mounting Guide FortiCam SD20 Mounting Guide April 14, 2016 Copyright 2016 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered
IF-80x Outdoor Terminal
95-10330_IF-800 V2016-10-20 Outdoor Terminal IF-80x Outdoor Terminal 1 IF-800 Outdoor / IF-801 We are pleased that you have decided to use a terminal of the IF-80x series for recording access data. Scope
UNIQUE DESIGN FEATURES
LIGHTING SYSTEM UNIQUE DESIGN FEATURES POWERITE The provides a totally new concept in Underwater Pool/Spa and Aquatic Landscape Lighting Design. Utilizing new technology moulding materials it has been
Operating Instruction
Level and Pressure Operating Instruction VEGASWING 71 A Contents Contents Safety information... 2 1 Product description 1.1 Function and configuration... 3 1.2 Functional principle... 3 1.3 Technical data...
MBE Mounts and Adapters
MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking
Lucid arena pro LED luminaire
Operation, installation and service instructions Lucid arena pro LED luminaire Please read these instructions before installing the luminaires, using them for the first time, storage or handling. These
HST -M2 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M2 Switching element with locking mechanism (Translation of Original Manual) HST-M2 Ident.-No.: 10214 HST-M2 Ident.-No.: 10626 HST-M2 Ident.-No.: 10218
Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
HST -M1 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M1 Switching element with locking mechanism (Translation of Original Manual) HST-M1 Ident. No.: 10213 HST-M1 Ident. No.: 10219 HST-M1, pictured Ident.
VIDEO INDOOR STATION WITH TOUCH DISPLAY SKYLINE:TEN BASIC
VIDEO INDOOR STATION WITH TOUCH DISPLAY SKYLINE:TEN BASIC www.tcsag.de TACT FOR VISITORS SKYLINE:TEN BASIC A pleasure for your tactile sense. The 10.1 inch touch display is ready for operation via gesture
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
WIRED REMOTE INSTALLATION GUIDE
WIRED REMOTE INSTALLATION GUIDE COMPONENTS: QUARTZ TM AND RISE TM Before commencing installation, it is essential that the instructions below are read and understood and that you have all the necessary
1/2 Introduction. SIMBOX LC 1/7 Introduction 1/8 Flush-mounting and surfacemounting. 1/9 Dimensional drawings
Siemens AG 200 ALPHA SIMBOX Small Distribution Boards /2 Introduction /2 Introduction /3 Flush-mounting and hollow-wall distribution boards /4 Hood-type distribution boards /5 Accessories /6 Dimensional
Installation guide. for Cisco TelePresence MX700 Dual Camera mounted on the wall
Installation guide for Cisco TelePresence MX700 Dual Camera mounted on the wall http://www.cisco.com/go/mx-docs This guide covers the MX700 with dual camera, mounted on the wall. Manpower We recommend
Dome Camera. Hardware Manual Z81, Z /01/08
Dome Camera Hardware Manual Z81, Z82 2018/01/08 Table of Contents Precautions 3 Regulatory Compliance... 4 Safety and Compliance Information... 5 Introduction 7 List of Models... 7 Package Contents...
Digital I/O Module. Impro (DIO) Digital I/O Module INSTALLATION MANUAL
COMPONENT CODES: HMI700-1-0-NN-XX HMI701-1-0-NN-XX Digital I/O Module Impro (DIO) Digital I/O Module Specifications INSTALLATION MANUAL The DIO is a Cluster Expansion Module that works in conjunction with
User manual & Installation guide free flex. free. viveroo GmbH Wewelsburger Straße Salzkotten Germany
User manual & Installation guide free flex free viveroo GmbH Wewelsburger Straße 4 33154 Salzkotten Germany www.viveroo.com REV20180924 Safety information! Warning Please read the assembly instructions
SIWAREX JB Aluminum Housing. Instruction Manual Edition 03/2006
s SIWAREX JB Aluminum Housing Instruction Manual Edition 03/2006 Table of Contents Table of Contents... 2 Warning and Safety Terms... 3 General... 4 1 Technical Description... 5 1.1 Area of Application...
LASERMET SLIMJIM LED SIGN INSTRUCTION MANUAL LEDS-SJ XXX
LASERMET SLIMJIM LED SIGN INSTRUCTION MANUAL LEDS-SJ 00843-00-XXX 00843-53-000 Page 1 of 11 Issue 3 2 January 2013 Lasermet SlimJim Illuminated Sign Instruction Manual Contents Introduction... 4 Installation...
19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43
9" TiRAX cabinet system from page 9" NETcell cabinet system from page Open 9" racks from page Wall-mounting/stand-alone distribution systems from page 5 Wall-mounting enclosure systems from page 6 Air
Weatherproof IR Color Day/Night Cameras
Weatherproof IR Color Day/Night Cameras Products: CFC6042IR, CFC6042IR2, CFC6042IR3, CFC6043IR, CFC6043IR2, CFC6043IR3 Please read this manual before installing and using this camera and always follow
WALL MOUNTED PANEL. SECTION 2G (Rev.E) SECTION CONTENTS. Download from Technical Manuals area. sec.2g SMYLE WALL-MOUNTED PANEL 2
SECTION G (Rev.E) 8 WALL MOUNTED PANEL 8 Download from www.urmet.com Technical Manuals area. SMYLE WALL-MOUNTED PANEL SECTION CONTENTS SPECIAL MODULES...8 TECHNICAL FEATURES... DOOR UNITS... Door phone
2M IR Mini Dome Quick Installation Guide
1 2M IR Mini Dome Quick Installation Guide Please follow the installation steps below to set up 2M IR Mini Dome IP Camera. Check the package contents against the list below. See P.1 Physical overview.
Vibration Sensor Type 640
Vibration Sensor Type 640 Standard Zone-1-21 Zone-2-22 Instruction Manual English Instruction Manual Vibration Sensor Type 640 Standard Zone-1-21 Zone-2-22 Edition: 12.04.10 Attention! Before Start-Up
AMP20. User Manual.
AMP20 User Manual www.audac.eu 2 Index Introduction 5 Precautions 6 Safety requirements 6 Caution servicing 7 EC Declaration of Conformity 7 Waste of Electrical and Electronic Equipment (WEEE) 7 Chapter
Installation manual EVA Start and Protected
Installation manual EVA Start and Protected 1 Introduction This document shows how to install and use the charge station EVA. There are three families of EVA models: EVA Connected, EVA Protected and EVA
MAXIMA+ Series Rotary Level Indicator
MAXIMA+ Series Rotary Level Indicator BinMaster: Division of Garner Industries 7201 N. 98th St., Lincoln, NE 68507 402-434-9102 email: info@binmaster.com www.binmaster.com OPERATING INSTRUCTIONS PLEASE
1 IF-812 or IF-815 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-812/IF-815
95-10324_V2016-11-23 IF-812/IF-815 1 IF-812 or IF-815 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-812 or IF-815 terminal (slave), you have purchased a reliable device for capturing
INSTALLATION INSTRUCTIONS
TS1000C TS700C INSTALLATION INSTRUCTIONS CONTENT: 1. Important safety instructions. 2. Specifications and main dimensions. 3. Parts included. 4. Installation. 5. RF remote system. 6. Feature functions
Speed Dome Installation Manual
Speed Dome Installation Manual Version 1.0.2. Revised October 30 th, 2018 Contents Welcome... 3 Important Safeguards and Warnings... 3 1 INSTALLATION PREPARATION... 5 1.1 Basic Requirements... 5 1.2 Installation
Installation manual plugs and connectors with screw connection (16/32 A)
EN Installation manual plugs and connectors with screw connection (16/32 60003213 Issue 04.2016 2016-04-01 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3
Operating Instructions VEGAMET 381
Operating Instructions VEGAMET 381 in out Contents Contents 1 About this document... 4 1.1 Function... 4 1.2 Target group... 4 1.3 Symbolism used... 4 2 For your safety... 6 2.1 Authorised personnel...
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
AE-237. Outdoor Enclosure. Installation Guide. Rev IP Sur veillance. Ordering part no.: G AE-237_V01. Document part no.
AE-237 Outdoor Enclosure Installation Guide Ordering part no.: 900026900G AE-237_V01 Rev. 1.1 Document part no.: 625030701G IP Sur veillance CAUTION: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE
STR-3 STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER. Mounting and operating instructions
STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA
ZAVIO Outdoor IR Mini Dome. Quick Installation Guide
ZAVIO Outdoor IR Mini Dome Quick Installation Guide 0 Quick Installation Guide Please follow the installation steps below to set up your IP Camera. Check the package contents with the list below. See P.1
1 IF-810 or IF-811 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-810/IF-811
95-10326_V2016-10-20 IF-810/IF-811 1 IF-810 or IF-811 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-810 or IF-811 terminal (slave), you have purchased a reliable device for capturing
PHOENIX CONTACT Pin. SUBCON-PLUS M ARCNET, MULTI/MININET (B&R), SYSTEM 2003 (B&R), P-NET SUCONET K1, K2 (EATON/Moeller),
Fast connector with screw terminal block connection for fieldbus systems Data sheet 00287_en_02 PHOENIX CONTACT 207-04-2 Description The SUBCON-PLUS/... D-SUB series is specifically designed for use in
HD Mini IR Waterproof Fixed Network Camera. Quick Start Guide. Version 1.2.0
HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Version 1.2.0 Welcome Thank you for purchasing our Network camera! This user s manual is designed to be a reference tool for your system. Please
optris CoolingJacket Advanced
Operator s Manual optris CoolingJacket Advanced Cooling housing for PI series, infrared video thermometer and infrared thermometer at high ambient temperatures Optris GmbH Ferdinand-Buisson-Str. 14 13127
OTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any
SolConeX extra-low voltage flange socket
SolConeX extra-low voltage flange socket Operating instructions Additional languages www.stahl-ex.com Contents 1 General Information...3 1.1 Manufacturer...3 1.2 Information regarding the operating instructions...3
Arecont Vision MegaDome 2 Installation Manual (DN Models Only)
recont Vision MegaDome 2 Installation Manual (DN Models Only) 0 P age recont Vision MegaDome 2 Installation Manual (DN Models Only) MegaDome 2 Installation Manual (DN Models Only). recont Vision MegaDome
INSPECTION CAMERA MODEL NO: CIC2410 OPERATION & SAFETY INSTRUCTIONS PART NO: GC0116
INSPECTION CAMERA MODEL NO: CIC2410 PART NO: 6470385 OPERATION & SAFETY INSTRUCTIONS GC0116 INTRODUCTION Thank you for purchasing this CLARKE Inspection Camera. Before attempting to use this product, please
Desktop housing AZ/EL Kit V1.2 for ERC-M Instructions. Instructions
Instructions Desktop housing AZ/EL it V1.2 for ERC-M Instructions Congratulations for buying your Desktop housing AZ/EL for ERC-M. This document will guide you through the needed steps for assembly of
INSEBO2IRF 2.1MP 1080P IP Eyeball Camera with IR
INSEBO2IRF 2.1MP 1080P IP Eyeball Camera with IR Quick Start Guide Version 1.0.0 Welcome Thank you for purchasing our Network camera! This user s manual is designed to be a reference tool for your system.
DP2 DOOR PHONE. For Technical Assistance Please Phone: (07)
DP2 DOOR PHONE For Technical Assistance Please Phone: (07) 5596 5128 TABLE OF CONTENTS Description Page 3 Door Phone Dimensions Page 4 Door Phone Range Page 5 Door Phone Performance Page 6 Operation Summary
MAXIMA + Series ROTARY LEVEL CONTROL
Price $5.00 MAXIMA + Series ROTARY LEVEL CONTROL OPERATING INSTRUCTIONS PLEASE READ CAREFULLY Division of Garner Industries 7201 North 98th Street Lincoln, NE 68507-9741 (402) 434-9102 925-0268 Rev. A
Liebert XDA Air Flow Enhancer. User Manual
Liebert XDA Air Flow Enhancer User Manual Technical Support Site If you encounter any installation or operational issues with your product, check the pertinent section of this manual to see if the issue
Dahua HD IR Vari-Focal Fixed Network Camera. Quick Start Guide
Dahua HD IR Vari-Focal Fixed Network Camera Quick Start Guide Version 1.0.0 Dahua Technology CO., LTD Welcome Thank you for purchasing our Network camera! This user s manual is designed to be a reference
- ELV OVERVIEW. InstallationGuide SUPPLIED PARTS RELATED PARTS. Brackets Fixtures. Other. 1 of 9 IG-STR9-ELV
OVERVIEW The STR9 ELV is a long run, low power, linear surface mount LED lighting system designed for exterior architectural lighting applications. This guide contains important information on planning
650/1000 Fresnel 650/1000 PC 300/500 Antihalo 300/500 Fresnel theatre spotlight. user manual
650/1000 Fresnel 650/1000 PC 300/500 Antihalo 300/500 Fresnel theatre spotlight user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0
Diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 55 Ex Diffuse reflection light scanner with background suppression Dimensioned drawing en 01-2011/05 50113748 1 khz 5 400mm 200mm with black-white error < 10% 10-30
PV Module Installation Instructions
Name 1601A Page 1 / 8 Name 1601A Page 2 / 8 1 Introduction Thanks for purchasing PV modules of HT SOLAR ENERGY JOINT STOCK COMPANY This manual refers to PV modules manufactured and sold by HT Turkey. This
DP2. Door Phone. For Technical Assistance call the Manufacturers direct ph AM - 5PM West Coast Pacific Time
DP2 Door Phone For Technical Assistance call the Manufacturers direct ph 0800 530 8645 9AM - 5PM West Coast Pacific Time NATCOMM USA LLC Supplier Code : NC TABLE OF CONTENTS Description Page 3 Door Phone
Sarix Professional IMP Series 3.75 Indoor Dome. Quick Start Guide IMP121-1IS IMP221-1IS IMP321-1IS IMP521-1IS C2291M-B-EN (12/16)
Sarix Professional IMP Series 3.75 Indoor Dome Quick Start Guide IMP121-1IS IMP221-1IS IMP321-1IS IMP521-1IS C2291M-B-EN (12/16) Sarix Professional IJP Series 2 Micro Indoor Dome Quick Start Guide IJP121-1IS
Control Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
Button Code Kit. Assembly Instructions and User Guide. Single Button Code Entry System
Button Code Kit Single Button Code Entry System Assembly Instructions and User Guide Rev 1.0 December 2009 www.alan-parekh.com Copyright 2009 Alan Electronic Projects Inc. 1. Introduction... 4 1.1 Concept
Catalog. IP video door intercom system for smartphones and tablets (ios, Android)
Catalog IP video door intercom system for smartphones and tablets (ios, Android) myintercom in action... 1. Surf the Internet in the garden 2. The driveway entrance bell rings* 3. "I'll open for you."
Infrared Dome CCD Camera User Manual
Infrared Dome CCD Camera User Manual Products: CDC3115IR, CDC3114VF, CDC3114VF2, CDC3114IR2 Please read this manual before installing and using this camera and always follow instructions for proper use.
B&W RearView Camera Installation & Operation
B&W RearView Camera Installation & Operation CA52 (Camera) FOR MORE INFORMATION WWW.STRATEGICVISTA.COM BEFORE OPERATING THIS SYSTEM, PLEASE READ THIS MANUAL THOROUGHLY AND RETAIN IT FOR FUTURE REFERENCE
E-37-V Dome Network Camera. Quick Start Guide
E-37-V Dome Network Camera Quick Start Guide i Welcome Thank you for purchasing our Network camera! This user s manual is designed to be a reference tool for your system. Please read the following safeguard
EVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
InForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
Next Gen Sarix Enhanced IBE Series Bullet Cameras
Next Gen Sarix Enhanced IBE Series Bullet Cameras Installation Manual C1334M 12/16 1 Contents Important Notices... 3 Regulatory Notices... 3 Radio and Television Interference... 3 Korean Class A EMC...
FILTER NAME CONSTRUCTION FEATURES APPLICATIONS ORDER CODE MEMBRANE Body: polycarbonate Filter: PTFE membrane
Filter Caps for Humidity and Dewpoint Transmitters with probe 12 mm (0.47 ) The right choice of appropriate filter cap is essential for best long term performance in the application. For assistance please
Operators Guide. Vision 3 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 3 Pan & Tilt Head Vinten Camera Control Solutions Vision 3 Pan and Tilt Head Publication Part No. 3543-8 Issue 4 Copyright Vinten Broadcast Limited 2004 All rights reserved throughout
Service poles for industrial applications
Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for
ILUMEN PID SOLUTION INDOOR OUTDOOR ILUMEN PIDBOX MINI INSTALLATION MANUAL. Ilumen PIDbox mini Version 1.5
ILUMEN PID SOLUTION ILUMEN PIDBOX MINI INSTALLATION MANUAL INDOOR OUTDOOR Ilumen PIDbox mini Version 1.5 1 TABLE OF CONTENT 1 Information on this manual... 3 1.1 Validity... 3 1.2 Target group... 3 1.3
SOLO. an invisible, electronic lock with multiple usages. Technology Solo locks are available in the following different models.
Page 1 / Version 1,0 SOLO an invisible, electronic lock with multiple usages Stand-alone electronic RFID lock for: Shops and Retail: Glass cabinets and display cases, supply cupboards, staff lockers Hospitals:
Installation Manual - Suntrol STD500LED
Installation Manual - Suntrol STD500LED Large Display Example! ATTENTION WHILE MOUNTING THE DISPLAY DO NOT PULL ON THE FRONT GLASS! DO NOT MOUNT THE DISPLAY OVER PASSAGEWAYS OR PERSONS! !!! Safety instructions
HD Vari-focal Dome Network Camera. Quick Start Guide. Version 1.0.0
HD Vari-focal Dome Network Camera Quick Start Guide Version 1.0.0 Welcome Thank you for purchasing our Network camera! This user s manual is designed to be a reference tool for your system. Please read
Flush plate Visign for Style 12. Instructions for Use. for concealed cistern 2H, concealed cistern 2L, concealed cistern from 07/2009.
Flush plate Visign for Style 12 Instructions for Use for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C Model Year built: 8332.4 from 07/2009 en_int Flush plate Visign for Style 12 2