WALL MOUNTED PANEL. SECTION 2G (Rev.E) SECTION CONTENTS. Download from Technical Manuals area. sec.2g SMYLE WALL-MOUNTED PANEL 2

Size: px

Start display at page:

Download "WALL MOUNTED PANEL. SECTION 2G (Rev.E) SECTION CONTENTS. Download from Technical Manuals area. sec.2g SMYLE WALL-MOUNTED PANEL 2"

Darlene Ross
5 years ago
Views:

1 SECTION G (Rev.E) 8 WALL MOUNTED PANEL 8 Download from Technical Manuals area. SMYLE WALL-MOUNTED PANEL SECTION CONTENTS SPECIAL MODULES...8 TECHNICAL FEATURES... DOOR UNITS... Door phone door units... Video door phone door units...3 Description of terminals Ref. 78/ Amplification regulation...3 PANEL INSTALLATION...3 PANEL INSTALLATION...8 INSTALLING CASINGS SIDE BY SIDE...0 FLUSH-MOUNTING n DOOR PHONE SYSTEMS - Examples of modular constructions with various capacities... COAX VIDEO DOOR PHONE SYSTEMS - Examples of modular constructions with various capacities... 3 WALL-MOUNTED PANEL Mod. 8 5 TECHNICAL FEATURES...5 CASES WITH FRONT FOR OUTDOOR HOUSE PHONE STATION...5 DOOR PHONE DOOR UNITS...5 Amplification regulation...6 CASING WITH FRONT...6 CASINGS WITH FRONT FOR OUTDOOR VIDEO HOUSE PHONE STATION...6 OUTDOOR VIDEO HOUSE PHONE STATION WITH COAXIAL CABLE...7 Camera lens direction adjustment...7 Amplification regulation...7 PUSH-BUTTONS...7 Push-button and name tag assembly...7 DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual sec.g

2 SMYLE WALL-MOUNTED PANEL TECHNICAL FEATURES DOOR UNITS SMYLE WALL-MOUNTED PANEL DOOR UNITS PANELS WALL MOUNTED PANEL Mod. SMYLE DOOR PHONE SYSTEM The Smyle panel, with its particularly innovative design, is designed and made for installation in one- and two-family door phone and video door phone systems. The following models are available: Door phone systems: With call button Ref. 9/ With call buttons Ref. 9/ Video door phone systems: With call button Ref. 79/ With call buttons Ref. 79/ The panel can be installed in 503 standard flush-mounting boxes or wall-mounted with screws and bolts to cut installation times without the need for masonry work. Considering the panel s small width, it is also suitable for being fitted on most gate poles with appropriate fasteners. The panels have name tags holders and variable dimensions according to the model: 40 x 60mm (one user panel) and 0 x 60mm (two user panel). In both cases, the name tags are backlit by two LEDS and can be accessed by opening the front part of the panel. TECHNICAL FEATURES VIDEO DOOR PHONE SYSTEM Dimensions: 85 x 99 x 40mm Material: ABS base and hood, anodised aluminium front Name tags: with button 35 x 56mm with buttons 5 x 56mm Total button stroke: mm Idle button stroke:.mm before contact closes Isolation voltage between contacts: 500Veff Maximum cut-off current: A on resistive load Name tag lighting: LEDs on reflecting base Name tag light power: Vac Name tag light draw: max. 30mA Working temperature range: from -0 to 50 C Degree of protection: IP44 DOOR PHONE DOOR UNITS Ref. 9/ and Ref. 9/ Smyle panels can be installed with following door units: 4+n systems powered at 6Vdc Ref. 8/500 4+n systems powered at Vdc Ref. 8/50 Before starting installation operations of the outdoor station, remove the plastic support as described below: The panel is clipped in without needing special tools into the body of the door unit in correspondence with the specific clips on the sides of the base of the panel as shown below. Ref. 8/500 8/50 Complete installation by fitting the microphone in the housing in the base on the bottom right. DESCRIPTION OF TERMINALS Ref. 8/500 + Door unit power positive - Door unit power negative Traditional audio out (to door phone speaker) A Electronic audio out (to door phone speaker) Voice in (from door phone microphone) DESCRIPTION OF TERMINALS Ref. 8/50 ~ Door unit Vac power -/~ Power ground PS Tone generator output for simultaneous call up to two units Traditional audio out (to door phone speaker) A Electronic audio out (to door phone speaker) Voice in (from door phone microphone) 3 sec.g DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

3 SMYLE WALL-MOUNTED PANEL PANEL INSTALLATION VIDEO DOOR PHONE DOOR UNITS PANEL INSTALLATION The Smyle Ref. 79/ and Ref. 79/ panels must be equipped with a black and white coax video door phone door unit Ref. 78/80. Power voltage: Max. draw: Camera sensor: Video output signal: 8Vdc <00 ma CCD /3 semi pinhole Vpp composite 75Ω nominal As the door phone door units, the panel is clipped in without needing special tools into the body of the door unit in correspondence with the specific clips on the sides of the base of the panel as shown below. Complete installation by fitting the microphone in the housing in the base on the bottom right. After installation, the camera direction can be adjusted according to the position of the framed subject. This operation can be performed manually after opening the front panel by means of the articulated jointed without requiring special tools DESCRIPTION OF TERMINALS Ref. 78/80 + Door unit power positive - Door unit power negative Traditional audio out (to door phone speaker) A Electronic audio out (to door phone speaker) Audio in (from door phone microphone) +TC Camera power positive R Camera power negative V3 Video signal V5 Video signal earth AMPLIFICATION REGULATION Amplification in the two directions can be adjusted by means of two potentiometers accessible with the panel is open. Transmission levels are calibrated at the factory. For this reason, they should only be adjusted when absolutely necessary (e.g. to eliminate Larsen feedback). In these cases, turn the volume adjustment potentiometer outwards to avoid worsening acoustic balance. To adjust external volume: Turn the potentiometer EXT. clockwise to turn the volume up and anticlockwise to turn it down. To adjust internal volume: Turn the potentiometer INT. anticlockwise to turn it down. Ref. 78/80 clockwise to turn the volume up and The installation phases of the two-button door phone panel is shown below. Proceed in the same way to install the other models. Remove the name tag light circuit. ø 4 mm Fasten the base onto a flat wall at the height shown in the figure using either the bolts provided or a 503 box. Mod. 503,55 m,65 mm PANELS WALL MOUNTED PANEL Mod. SMYLE DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual sec.g 3

4 SMYLE WALL-MOUNTED PANEL PANEL INSTALLATION PANELS WALL MOUNTED PANEL Mod. SMYLE Insert the door unit and the microphone on the base of the specific housing as shown in the respective paragraphs. Connect the wires (it is advisable to have the wire protrude from the wall by approximately 85-90mm for door phone panel and approximately 40-45mm for video door phone panels). Power terminals ~0 and ~ of the name tag LED circuit at Vac. Fasten the name tag light circuit making the wires pass underneath the support. Adjust the volume and position of the camera (if present). Write the name on the name tags and insert them in the housings. Rossi Insert the front part of the panel on the base and fasten it with the socket head screw using the wrench (mm) provided. Bianchi Rossi FLUSH-MOUNTING Ref. 9/50 5 mm NO 47 mm 09 mm 4 sec.g DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

5 WALL-MOUNTED PANEL Mod. 8 TECHNICAL FEATURES CASES WITH FRONT FOR OUTDOOR HOUSE PHONE STATION - DOOR PHONE DOOR UNITS Mod. 8 WALL-MOUNTED PANEL Mod. 8 The push-button panels Mod. 8 are the ideal compromise between inexpensiveness, design, straightforward installation and communicating efficiency for making DOOR PHONE SYSTEMS and video door phone systems. All the push-button panels can be installed rested on the wall with screws and plugs keeping a low projection from the wall: just 4mm. In consideration of its reduced width, installation of the push-button panel is also possible on a gatepost. The push-buttons, which also act as transparent cover for the name tag, are modular and come in two versions with different sizes. The following three models of push-button panels are available: set-up for outdoor house phone station, set up for outdoor video house phone station, and set-up for push-buttons only. Every model is available in two different colours: Anthracite and grey. The additional casings with push-buttons only can be fitted at the side of those set up for the outdoor station, thereby making it possible to make DOOR PHONE SYSTEMS with a maximum of 6 small pushbuttons or VIDEO DOOR PHONE SYSTEMS with a maximum of 4 small push-buttons. It is possible to make the following types of systems depending on the outdoor station installed in the casings: 4+n wire door phone systems with 6Vdc power voltage 4+n wire door phone systems with Vac power voltage Black and white video door phone system with coaxial cable In the case of particular requirements the push-button panel can be flush-fitted using the specific box Ref. 8/5, in this case, protrusion from the edge of the wall is reduced to a few millimetres. TECHNICAL FEATURES Dimensions: 46 x 99 x 4mm Material: ABS base and hood Anodised aluminium front Name tag: small button 0 x 60mm big button 40 x 60mm Total button stroke: mm Idle button stroke:,mm Before contact closes Isolation voltage between contacts: 500Veff Maximum cut-off current: A on resistive load Name tag lighting: green LEDs on reflecting base Name tag light power: Vac Name tag light draw: see housing description Working temperature range: C Degree of protection: IP44 CASES WITH FRONT FOR OUTDOOR HOUSE PHONE STATION The casings with front for outdoor house phone station come in two versions of different colour: Anthracite Ref. 8/0 Grey Ref. 8/ In both it is possible to install up to 6 small push-buttons (0 x 60mm) or up to 3 large push-buttons (40 x 60mm). The casings are supplied with three reflecting bases with the related lighting circuit with leds with a maximum uptake of 90mA. DESCRIPTION OF TERMINALS ~0 } Name tag light power ~ DOOR PHONE DOOR UNITS The housing Mod.8 can be installed whit following door units: 4+n systems powered at 6Vdc Ref. 8/500 4+n systems powered at Vdc Ref. 8/50 Before starting installation operations of the outdoor station, remove the plastic support as described below: The panel is clipped in without needing special tools into the body of 3 PANELS WALL MOUNTED PANEL Mod. 8 DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual sec.g 5

6 Mod. 8 WALL-MOUNTED PANEL Mod. 8 CASING WITH FRONT CASINGS WITH FRONT FOR OUTDOOR VIDEO HOUSE PHONE STATION PANELS WALL MOUNTED PANEL Mod. 8 the door unit in correspondence with the specific clips on the sides of the base of the panel as shown below. Complete installation by fitting the microphone in the housing in the base. Ref. 8/500 8/50 DESCRIPTION OF TERMINALS Ref. 8/500 + Door unit power positive - Door unit power negative Traditional audio out (to door phone speaker) A Electronic audio out (to door phone speaker) Voice in (from door phone microphone) DESCRIPTION OF TERMINALS Ref. 8/50 ~ Door unit Vac power -/~ Power ground PS Tone generator output for simultaneous call of up to units Traditional audio out (to door phone speaker) A Electronic audio out (to door phone speaker) Voice in (from door phone microphone) AMPLIFICATION REGULATION Amplification in the two directions may be adjusted by means of two potentiometers which can be accessed after removing the extractable front panel. Transmission levels are calibrated at the factory. For this reason, they should only be adjusted when absolutely necessary (e.g. to eliminate Larsen feedback). In these cases, turn the volume adjustment potentiometer outwards to avoid worsening acoustic balance. To adjust external volume: Turn the potentiometer shown clockwise to turn the volume up and anticlockwise to turn it down EXT.. To adjust internal volume: Turn the potentiometer shown clockwise to turn the volume up and anticlockwise to turn it down INT.. CASING WITH FRONT The casings with front come in two versions of different colour: Anthracite Ref. 8/0 Grey Ref. 8/ These casings, which are already set up with the Name tag light power circuit, make it possible to increase the number of users that can be called. Indeed, it is possible to install up to 0 small push-buttons (0 x 60mm) or up to 5 large push-buttons (40 x 60mm) on them. The casings with front can be installed at the side of any other pushbutton panel set up for outdoor station, using the special fairlead shims provided and following the instructions given in the Installing casings side by side paragraph. The casings are supplied with five reflecting bases with the related lighting circuit with leds with a maximum uptake of 50mA. DESCRIPTION OF TERMINALS ~0 } Name tag light power ~ CASINGS WITH FRONT FOR OUTDOOR VIDEO HOUSE PHONE STATION The casings with front for outdoor video house phone station come in two versions of different colour: Anthracite Ref. 78/0 Grey Ref. 78/ In both it is possible to install up to 4 small push-buttons (0 x 60mm) or up to large push-buttons (40 x 60mm). The casings are supplied with two reflecting bases with the related lighting circuit with leds with a maximum uptake of 60mA. DESCRIPTION OF TERMINALS ~0 } Name tag light power ~ 6 sec.g DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

7 WALL-MOUNTED PANEL Mod. 8 OUTDOOR VIDEO HOUSE PHONE STATION WITH COAXIAL CABLE PUSH-BUTTONS Mod. 8 OUTDOOR VIDEO HOUSE PHONE STATION WITH COAXIAL CABLE The panels must be equipped with a coax video door phone door unit Ref. 78/80. The main characteristics of this video door phone door unit are: Power voltage: 8Vdc Max. draw: <00 ma Camera sensor: CCD/3 semi pinhole Video output signal: Vpp composite 75Ω nominal As the door phone door units, the panel is clipped in without needing special tools into the body of the door unit in correspondence with the specific clips on the sides of the base of the panel as shown below. Complete installation by fitting the microphone in the housing in the base. Ref. 78/80 DESCRIPTION OF TERMINALS + Door unit power positive - Door unit power negative Traditional audio out (to door phone speaker) A Electronic audio out (to door phone speaker) Voice in (from door phone microphone) +TC Camera power positive R Camera power negative V3 Video signal V5 Video signal earth CAMERA LENS DIRECTION ADJUSTMENT After installation, the camera direction can be adjusted according to the position of the framed subject. This operation can be performed manually after opening the front panel by means of the articulated jointed without requiring special tools AMPLIFICATION REGULATION Amplification in the two directions may be adjusted by means of two potentiometers which can be accessed after removing the extractable front panel. Transmission levels are calibrated at the factory. For this reason, they should only be adjusted when absolutely necessary (e.g. to eliminate Larsen feedback). In these cases, turn the volume adjustment potentiometer outwards to avoid worsening acoustic balance. To adjust external volume: Turn the potentiometer shown clockwise to turn the volume up and anticlockwise to turn it down EXT.. To adjust internal volume: Turn the potentiometer shown clockwise to turn the volume up and anticlockwise to turn it down INT.. PUSH-BUTTONS The push-buttons to be installed on the various casings are to be bought separately and come in two versions with different sizes: Small button 0 x 60mm Ref. 8/ Big button 40 x 60mm Ref. 8/ The push-buttons are supplied complete with: Button body that can be clipped onto the base of the push-button panel. Transparent protective cover with indication of pressing point. Support for installation and clipping onto the casings. Transparent name tag. Name tag lighting diffuser. The large push-buttons should always be positioned in correspondence with the reflecting chambers and not superimposed on two of them. PUSH-BUTTON AND NAME TAG ASSEMBLY Fit the button body on the base of the casing. 3 4 The large push-buttons should be assembled so that the button body corresponds with the name tag pressing point as shown in the figure below. PANELS WALL MOUNTED PANEL Mod. 8 DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual sec.g 7

8 Mod. 8 WALL-MOUNTED PANEL Mod. 8 SPECIAL MODULES PANEL INSTALLATION PANELS WALL MOUNTED PANEL Mod. 8 3 Fit the support with the transparent cover starting from the top downwards. To remove the supports with transparent cover use a screwdriver and lever on the fastening catches. Write the name on the name tags and insert them in the housings. Rossi 3 3 The figures above refer to the installation of a large pushbutton, the small push-button Ref. 8/ should be installed in the same way. Rossi Ref. 8/ SPECIAL MODULES In replacement of the push-buttons the following special modules can be installed: Anthracite blank modules (dimensions 0 x 60mm): Ref. 8/30 Grey blank modules (dimensions 0 x 60mm): Ref. 8/3 Transparent module with tag for house number (dimensions 40 x 60mm): Ref. 8/5 NOTE: the installation procedures are the same as those described for the push-buttons. PANEL INSTALLATION The installation phases of the door phone panel is shown below. Proceed in the same way to install the other models. Remove the name tag light circuit. Fasten the casing base on a flat wall, at the height shown in the figure, using the screws (A) and wall plugs (B) provided or on a box Mod A A B B,55 m,65 m 8 sec.g DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

9 WALL-MOUNTED PANEL Mod. 8 PANEL INSTALLATION Mod. 8 A Insert the door unit and the microphone on the base of the specific housing as shown in the respective paragraphs. Insert the push-buttons on the base of the casing. Push-button Ref. 8/ should be positioned so that it is under the indication of the name tag pressing point. B Connect the wires (it is advisable to have the wire protrude from the wall by approximately 00mm for door phone panel and approximately 90mm for video door phone panels). Power terminals ~0 and ~ of the name tag LED circuit at Vac. Mod. 503 To simplify push-button wiring, a button common joining bar (G/T) is provided to be installed between the terminals of the buttons and cut according to requirements. Fasten the name tag light circuit making the wires pass underneath the support. (G/T) Adjust the volume and position of the camera (if present). Fit the support with the transparent cover starting from the top downwards as shown in the figure below. Write the name on the name tags and insert them in the housings. Rossi 3 Rossi PANELS WALL MOUNTED PANEL Mod. 8 DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual sec.g 9

10 Mod. 8 WALL-MOUNTED PANEL Mod. 8 INSTALLING CASINGS SIDE BY SIDE FLUSH-MOUNTING Insert the front part of the panel on the base and fasten it with the socket head screw using the wrench (mm) provided. HORIZONTAL INSTALLING SIDE BY SIDE PANELS WALL MOUNTED PANEL Mod. 8 C INSTALLING CASINGS SIDE BY SIDE The casings can be joined together using the special fairlead shims (provided) either vertically or horizontally. The shims are hollow to allow the passage of wires from one pushbutton panel to the other. VERTICAL INSTALLING SIDE BY SIDE HORIZONTAL INSTALLING SIDE BY SIDE To install a casing with buttons only at the side of a casing for outdoor station (both house phone and video house phone) proceed as follows: Take out the removable plug of the casing on the side for which installation is required. Remove the outer wall in correspondence of the holes left by the plugs with the help of flat-nosed pliers. Insert the fairlead shims and join the two casings. FLUSH-MOUNTING A long nose pliers is suggested. VERTICAL INSTALLING SIDE BY SIDE A long nose pliers is suggested. For flush-mounting the push-button panel the special box must be purchased separately (Ref. 8/5), then proceed as follows: Make the hole for letting through the connection wires before closing the flush-mounting box. D 0 sec.g DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

11 WALL-MOUNTED PANEL Mod. 8 FLUSH-MOUNTING Mod. 8 Embed the box in the wall. HORIZONTAL INSTALLING SIDE BY SIDE Fasten the frame provided to the box. Screw the casing base to the frame. NO Complete installation as described in the previous paragraphs according to the type of casing. For installing push-button panels side by side, special fairlead shims are provided to be placed between the flush-fitting boxes. VERTICAL INSTALLING SIDE BY SIDE PANELS WALL MOUNTED PANEL Mod. 8 DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual sec.g

12 Mod. 8 WALL-MOUNTED PANEL Mod. 8 4+n DOOR PHONE SYSTEMS EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES PANELS WALL MOUNTED PANEL Mod. 8 4+n (with large push-buttons) COMMON PRODUCTS ANTHRACITE GRAY ACCESSORIES Door unit with 6Vdc power voltage (*) Door unit with Vac power voltage (*) Buttons for door unit for door unit /500 8/50 8/ /0 8/0 8/ / 8/ 8/ / n (with small push-buttons) COMMON PRODUCTS ANTHRACITE GRAY ACCESSORIES Flush mounting box (*) alternatives (@) as an alternative to two blank modules, it is possible to install a house number module Ref. 8/5 Door unit with 6Vdc power voltage (*) Door unit with Vac power voltage (*) Buttons for door unit for door unit Flush mounting box (*) alternatives (@) as an alternative to two blank modules, it is possible to install a house number module Ref. 8/ /500 8/50 8/ /0 8/0 8/ / 8/ 8/ / sec.g DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

13 WALL-MOUNTED PANEL Mod. 8 COAX VIDEO DOOR PHONE SYSTEMS EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES Mod. 8 coax (with large push-buttons) COMMON PRODUCTS ANTHRACITE GRAY ACCESSORIES Video door unit with coax cable Buttons for door unit for door unit Flush mounting box coax (with small push-buttons) COMMON PRODUCTS ANTHRACITE GRAY ACCESSORIES (@) as an alternative to two blank modules, it is possible to install a house number module Ref. 8/5 Video door unit with coax cable Buttons for door unit for door unit Flush mounting box 78/80 8/ 78/0 8/0 8/30 78/ 8/ 8/3 8/5 78/80 8/ 78/0 8/0 8/30 8/ 8/ 8/3 8/ (@) as an alternative to two blank modules, it is possible to install a house number module Ref. 8/ PANELS WALL MOUNTED PANEL Mod. 8 DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual sec.g 3

14 8 4 sec.g DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

PUSH BUTTON PANEL. SECTION 3A (Rev. B) SECTION CONTENTS. Download from Technical Manuals area. sec.3a

PUSH BUTTON PANEL. SECTION 3A (Rev. B) SECTION CONTENTS. Download from Technical Manuals area. sec.3a SECTION 3A (Rev. B) Download from www.urmet.com Technical Manuals area. SINTHESI 2 CAMERA MODULE AND DOOR UNIT WITH 2 BUTTONS...2 Features...2 Structure...2 Terminals pins description...3 Technical characteristics...3