2688 WESTHILLS COURT, SIMI VALLEY, CA

Size: px

Start display at page:

Download "2688 WESTHILLS COURT, SIMI VALLEY, CA"

Rosa Stanley
5 years ago
Views:

NEW PRODUCT INTRODUCTION 2688 WESTHILLS COURT, SIMI VALLEY, CA 93065-2635 To: All Hirose Sales Personnel and Partners From: Hirose USA Marketing Dept.

speeds up to 28 Gbps, a contact pitch of 1 mm X 1 mm and a low height of 1.22 mm.

attachment of PCBs with ASIC chips. This allows connection without wire band soldering.

This series has a basic layout of 6 X 25 pins, and standard pin counts are 150 and 210. Custom positions are also available, with pin counts up to 3000+.

A self-alignment centering feature allows the contact to float while remaining intact in the housing, and the pin tips are contained in the housing, which reduces the chance of snagged or bent pins.

1 NEW PRODUCT INTRODUCTION 2688 WESTHILLS COURT, SIMI VALLEY, CA To: All Hirose Sales Personnel and Partners From: Hirose USA Marketing Dept. Subject: New Product Release for IT11 Series October 6, 2015 From HIROSE ELECTRIC USA The IT11 high-speed, low-profile compression connector manufactured by Hirose Electric features transmission speeds up to 28 Gbps, a contact pitch of 1 mm X 1 mm and a low height of 1.22 mm. The IT11 compression connector is ideal for use in servers for direct attachment of integrated circuits directly to the motherboard, such as processors and microprocessors, and also for direct attachment of PCBs with ASIC chips. This allows connection without wire band soldering. Hirose IT11 is a licensed second source for cstack and clga (Compression Land Grid Array) product family from Amphenol Intercon Systems, and the IT11 is fully interchangeable with cstack assemblies. This series has a basic layout of 6 X 25 pins, and standard pin counts are 150 and 210. Custom positions are also available, with pin counts up to This allows a high degree of design flexibility and very high rates of data transmition. The spring contacts are c-shaped, which provides several advantages. A self-alignment centering feature allows the contact to float while remaining intact in the housing, and the pin tips are contained in the housing, which reduces the chance of snagged or bent pins. Additionally, the pins wipe across the mating pad when compressed. Several IT11 configurations can be configured on the same board. Two guide pins position the connector, and two M3 screws function to fasten the system together. cstack Flex assemblies are supplied with attached flex stiffener plates and captive screws. Co-planar Configuration Guide pin FPC Single Mold Compression 6 X 25 pins configuration Standard pin no.s: 150, 210 Custom sizes available Parallel Configuration Screw Top plate Bottom plate C-Spring Contact Structure Compressable C-spring contact Up to 28 Gbps 1mm X 1mm pitch 1.22mm mated height Compressible contact structure - Allows floating while remaining intact in housing - Pin tips within housing, preventing snagging/bending - Pins wipe across the mating pad when compressed Please consult Hirose USA Marketing Department for any questions on part numbers, drawings and other technical information.

2 News Release FOR IMMEDIATE RELEASE Oct 6, 2015 Editor Contact Information Chris Tubbs, Hirose Electric (805) Garth Miller, All Business Marketing (919) With a stacking height of only 1.22mm, the IT11 Series compression connector offers transmission speeds of more than 28 Gbps HIROSE S HIGH-SPEED COMPRESSION CONNECTOR IS A LICENSED SECOND SOURCE FOR AMPHENOL S CSTACK AND CLGA PRODUCT FAMILY SIMI VALLEY, CA Oct 6, 2015 Hirose, a leader in the development of innovative connector solutions, has launched a high-speed 28+ Gbps single mold compression connector that features a lowprofile design with a height of only 1.22mm. The IT11 Series is a licensed second source for the cstack and clga (Compression Land Grid Array) product families from Amphenol Intercon Systems. Hirose s IT11 Series is fully interchangeable with cstack assemblies. Optimizing signal integrity, the IT11 Series compression connector series utilizes a basic 6 X 25 pin grid configuration. The standard 150- and 210- position versions have contact pitches of 1mm and 1.27mm respectively. Custom positions are also available with pin counts up to to provide design flexibility and meet high-speed data transmission rate requirements. The IT11 Series is ideal for use in servers for direct attachment of integrated circuits directly to the motherboard such as processors and microprocessors, and also for direct attachment of PCBs with ASIC chips. This allows connection without soldering. The IT11 Series can also be used in a flexible printed circuit (FPC) connection configuration.

3 Hirose s compression connector uses C-shaped spring contacts that provide several design advantages. The C-spring contact structure has a self-aligning centering feature that allows the contact to float while remaining intact in the housing, and the pin tips are contained in the housing, which reduces the chance of snagged or bent pins. In addition, the pins wipe across the mating pad when compressed. The connector also has holes for guide pins that ensure correct mounting placement. Several IT11 Series compression connectors can be configured on the same board. Our new IT11 Series compression connector combines high transmission speeds with a low-profile to give engineers the best of both worlds, said Tom Matsuo, General Manager of the High Speed Business Unit for Hirose Electric USA. The ability to directly connect integrated chips to the motherboard without soldering greatly simplifies the assembly process. Hirose has developed a wide selection of styles and configurations to provide design flexibility and to meet most any application requirements. The connector is well suited for aerospace, automotive, data com, LGA chip sockets, medical equipment and medical devices, mobile electronic devices, server applications and more. The IT11 Series connector has a rated current of 0.5A per pin, rated voltage of 50V AC, a contact resistance of 20 m ohms maximum (initial), an insulation resistance of 500V DC; and an operating temperature of -55 degrees C to + 85 degrees C. For additional information about the IT11 Series connectors, please visit: ABOUT HIROSE ELECTRIC Hirose Electric Co., Ltd. is a leading global supplier of innovative interconnects, with sales of over $1 billion to customers worldwide. Hirose employs advanced engineering services, superior customer support and worldwide manufacturing capabilities to provide value-based connector solutions for various industries including: industrial, telecommunication, consumer electronics, computer and automotive. More information can be found on Hirose Electric s corporate website at

Signal Integrity: 85Ω and 100Ω impedance 7 Second source licensed with Amphenol InterCon Systems cstack and clga product family 8.

c-stack products. Ideal for board-to-board coplanar and parallel applications.

4 Features IT11Series Compression Connectors 1. Up to 28+ Gbps transmission speed 2. Low Profile: stacking height: 1.22 mm 3. Pitch: 1.0 mm grid for 150 pos., 1.27 mm grid for 210 pos. 4. Current Capacity: 0.5A/pin 5. Holes for guide pins ensure correct mounting placement 6. Signal Integrity: 85Ω and 100Ω impedance 7 Second source licensed with Amphenol InterCon Systems cstack and clga product family 8. Fully interchangable with with Amphenol cstack Flex assemblies NEW PRODUCT From HIROSE ELECTRIC USA Co-planar and Parallel Configurations Configurable with Amphenol c-stack products. Ideal for board-to-board coplanar and parallel applications. Screw Guide pin Top plate FPC Bottom plate Compressable C-spring contact cstack Flex assemblies are supplied with attached flex stiffener plates and captive screws. Low Profile and High Speed C-Spring Contact Structure 150 and 210 Standard Contact Positions Arranged in a 6 x 25 grid configuration to maximize signal. Custom positions avaiable. (Contact your Hirose representative.) No compression Middle compression Full compression Compressible contact structure - Allows floating while remaining intact in housing - Pin tips within housing, preventing snagging/bending - Pins wipe across the mating pad when compressed Hirose Electric USA 2688 Westhills Court Simi Valley, CA T: (805)

Contact Pitch Microprocessor attached 0.

5 Applications Server Applications LGA Chip Sockets Mobile Devices Data Com Medical Equipment and Devices Automotive Aerospace IT11 Connector Specifications Rated Current RatedVoltage Operating Temperature Contact Pitch Microprocessor attached 0.5A/pin 50V AC -55 C to + 85 C 1mm x 1mm Contact Resistance Mating Cycles Dielectric Withstanding Voltage Insulation Resistance 20 mω maximum initial 10 mω maximum change per contact after test 25 times 500 V AC 500 V DC Specifications herein are subject to change without notice. Hirose Electric USA 2688 Westhills Court Simi Valley, CA T: (805)

0.4mm Pitch, Stacking Type Board-to-Board (FPC) Connector WP7 Series. Plug

COMPONENTS PRODUCT INFORMATION NEW RoHS Compliant 0.4mm Pitch, Stacking Type Board-to-Board (FPC) Connector WP7 Series CONNECTOR MB-0228-3 September 2017 Plug Plug Receptacle Receptacle The WP7 Series