TEST REPORT. Fobsun Electronics Limited

Transcription

1 1 Cover Page Applicant: TEST REPORT Fobsun Electronics Limited Report No: GTSE Address of Applicant: 4F, Building A6, Tianrui Industrial Park, Fuyuan 1st. Rd., Fuyong Town, Bao an Dist., , Shenzhen, CHINA Equipment Under Test (EUT) Product Name: Model No.: LED Downlight Applicable standards: AS/NZS CISPR15:2011 Date of sample receipt: 22 Aug., 2012 Date of Test: Aug., 2012 Date of report issued: 29 Aug., 2012 Test Result : PASS * FCL3-9W, FCL3-12W, FCL4-10W, FCL4-12W, FCL4A-10W, FCL4A-12W, FCL5-15W, FCL5-20W, FCL5-26W, FCL5-30W, FCL6-15W, FCL6-20W, FCL6-26W, FCL6-30W, FCL6A-15W, FCL6A-20W, FCL6A-26W, FCL6A-30W, FCL8-15W, FCL8-20W, FCL8-26W, FCL8-30W, FCL9-15W, FCL9-20W, FCL9-26W,FCL9-30W * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.

2 2 Version Version No. Date Description Aug., 2012 Original Prepared By: Date: 29 Aug., 2012 Project Engineer Reviewed By: Date: 29 Aug., 2012 Reviewer Telephone: +86 (0) Fax: +86 (0) Page 2 of 23

3 3 Contents Report No: GTSE Page 1 COVER PAGE VERSION CONTENTS TEST SUMMARY GENERAL INFORMATION CLIENT INFORMATION GENERAL DESCRIPTION OF E.U.T TEST MODE AND VOLTAGE DESCRIPTION OF SUPPORT UNITS DEVIATION FROM STANDARDS ABNORMALITIES FROM STANDARD CONDITIONS TEST FACILITY TEST LOCATION TEST INSTRUMENTS LIST EMISSION TEST RESULTS RADIATED EMISSION CONDUCTED EMISSIONS RADIATED ELECTROMAGNETIC DISTURBANCE (9KHZ-30MHZ) TEST SETUP PHOTO EUT CONSTRUCTIONAL DETAILS...21 Telephone: +86 (0) Fax: +86 (0) Page 3 of 23

4 4 Test Summary Report No: GTSE Test Test Requirement Test Method Class / Severity Result Radiated Emission AS/NZS CISPR 15 AS/NZS CISPR 15 Table 3b PASS Conducted Emission AS/NZS CISPR 15 AS/NZS CISPR 15 Table 2a PASS Radiated electromagnetic disturbances(9khz- 30MHz) AS/NZS CISPR 15 AS/NZS CISPR 15 Table 3a PASS Telephone: +86 (0) Fax: +86 (0) Page 4 of 23

5 5 General Information 5.1 Client Information Applicant: Address of Applicant: Manufacturer/ Factory: Address of Manufacturer/ Factory: 5.2 General Description of E.U.T. Product Name: Model No.: Remark: Model Fobsun Electronics Limited 4F, Building A6, Tianrui Industrial Park, Fuyuan 1st. Rd., Fuyong Town, Bao an Dist., , Shenzhen, CHINA Fobsun Electronics Limited 4F, Building A6, Tianrui Industrial Park, Fuyuan 1st. Rd., Fuyong Town, Bao an Dist., , Shenzhen, CHINA LED Downlight FCL3-9W, FCL3-12W, FCL4-10W, FCL4-12W, FCL4A-10W, FCL4A-12W, FCL5-15W, FCL5-20W, FCL5-26W, FCL5-30W, FCL6-15W, FCL6-20W, FCL6-26W, FCL6-30W, FCL6A-15W, FCL6A-20W, FCL6A-26W, FCL6A-30W, FCL8-15W, FCL8-20W, FCL8-26W, FCL8-30W, FCL9-15W, FCL9-20W, FCL9-26W, FCL9-30W Only the model No. FCL9-30W was tested. FCL3-9W, FCL3-12W, FCL4-10W, FCL4-12W, FCL4A-10W, FCL4A-12W, FCL5-15W, FCL5-20W, FCL5-26W, FCL5-30W, FCL6-15W, FCL6-20W, FCL6-26W, FCL6-30W, FCL6A-15W, FCL6A-20W, FCL6A-26W, FCL6A-30W, FCL8-15W, FCL8-20W, FCL8-26W, FCL8-30W, FCL9-15W, FCL9-20W, FCL9-26W, FCL9-30W are identical in the same PCB layout, interior structure and electrica circuits. The only differences are as follows: Input/ Output Voltage FCL3-9W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 9W FCL3-12W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 12W FCL4-10W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 10W FCL4-12W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 12W FCL4A-10W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 10W Power FCL4A-12W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 12W FCL5-15W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 15W FCL5-20W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 20W FCL5-26W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 26W FCL5-30W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 30W FCL6-15W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 15W Telephone: +86 (0) Fax: +86 (0) Page 5 of 23

6 FCL6-20W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 20W FCL6-26W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 26W FCL6-30W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 30W FCL6A-15W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 15W FCL6A-20W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 20W FCL6A-26W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 26W FCL6A-30W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 30W FCL8-15W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 15W FCL8-20W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 20W FCL8-26W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 26W FCL8-30W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 30W FCL9-15W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 350 ma 15W FCL9-20W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 20W FCL9-26W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 26W FCL9-30W Input: AC V, AC 110/220V, 50/60Hz 0.7A max Output: DC 28-42V, 700 ma 30W 5.3 Test mode and voltage Test mode: On mode Keep the EUT Lighting Test voltage: AC 240V 50Hz 5.4 Description of Support Units The EUT has been tested an independent unit. 5.5 Deviation from Standards None. 5.6 Abnormalities from Standard Conditions None. Telephone: +86 (0) Fax: +86 (0) Page 6 of 23

7 5.7 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS Registration No.: CNAS L5775 CNAS has accredited to ISO/IEC General Requirements for the competence of testing and calibration laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. FCC Registration No.: , Shenzhen EMC Laboratory has been registered and fuly described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in files. Registration , July 20, Industry Canada (IC) The 3m Semi-anechoic chamber of has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 9079A Test Location All test items were performed at: Address: Shenzhen, China Tel: ; Fax: Telephone: +86 (0) Fax: +86 (0) Page 7 of 23

8 6 Test Instruments List Radiated Emission: Item Test Equipment Manufacturer Model No. Inventory No. Report No: GTSE Cal.Date (mm-dd-yy) Cal.Due date (mm-dd-yy) 1 3m Semi- Anechoic Chamber ZhongYu Electron 9.0(L)*6.0(W)* 6.0(H) GTS250 Mar Mar Control Room ZhongYu Electron 6.2(L)*2.5(W)* 2.4(H) GTS251 N/A N/A 3 ESU EMI Test Receiver R&S ESU26 GTS203 Jul Jul BiConiLog Antenna SCHWARZBECK VULB9163 GTS214 Mar Mar RF Amplifier HP 8347A GTS204 Jul Jul EMI Test Software AUDIX E3 N/A N/A N/A 7 Coaxial cable GTS N/A GTS210 Jul Jul Coaxial Cable GTS N/A GTS211 Jul Jul Thermo meter KTJ TA328 GTS256 Jul Jul Conducted Emission Item Test Equipment Manufacturer Model No. Inventory No. Cal.Date (mm-dd-yy) Cal.Due date (mm-dd-yy) 1 Shielding Room ZhongYu Electron 7.3(L)x3.1(W)x2.9(H) GTS252 Sep Sep EMI Test Receiver R&S ESCS30 GTS223 Jul Jul Pulse Limiter R&S ESH3-Z2 GTS224 Jul Jul Coaxial Switch ANRITSU CORP MP59B GTS225 Jul Jul Artificial Mains Network SCHWARZBECK MESS NSLK8127 GTS226 Jul Jul Coaxial Cable GTS N/A GTS227 Jul Jul EMI Test Software AUDIX E3 N/A N/A N/A 8 Thermo meter KTJ TA328 GTS233 Jul Jul Radiated Electromagnetic Disturbance: Item Test Equipment Manufacturer Model No. Inventory No. Cal.Date Cal.Due date (mm-dd-yy) (mm-dd-yy) 1 Loop antenna Laplace instruments RF300 EMC0701 Aug Aug Calibration Dipole for EN55015 RE GTS N/A EMC0702 Verify before test 3 Test software Schaffner CES9985 EMC0409 N/A N/A 4 Receiver MEB SCR3101 EMC0403 Sept Sep Spectrum analyzer Advantest R3261C+99 EMC0402 Sept Sep Cable 1m W.H. Westlake M17/75 EMC0407 Sept Sep General used equipment: Cal.Date Cal.Due date Item Test Equipment Manufacturer Model No. Inventory No. (dd-mm-yy) (dd-mm-yy) 1 Barometer ChangChun DYM3 GTS257 July July Telephone: +86 (0) Fax: +86 (0) Page 8 of 23

9 7 Emission Test Results 7.1 Radiated Emission Test Requirement: AS/NZS CISPR 15 Test Method: AS/NZS CISPR 15 Test Frequency Range: 30MHz to 300MHz Test site: Measurement Distance: 3m Limit: Table 3b of AS/NZS CISPR 15 Test setup: Test environment: Temp.: 25 C Humid.: 52% Press.: 1 012mbar Measurement Record: Uncertainty: ± 4.50dB Test Instruments: Refer to section 6 for details Test mode: Refer to section 5.3 for details Test results: Passed Telephone: +86 (0) Fax: +86 (0) Page 9 of 23

10 Measurement Data Test mode: On mode Antenna Polarity: Horizontal Telephone: +86 (0) Fax: +86 (0) Page 10 of 23

11 Test mode: On mode Antenna Polarity: Vertical Telephone: +86 (0) Fax: +86 (0) Page 11 of 23

12 7.2 Conducted Emissions Test Requirement: AS/NZS CISPR 15 Test Method: AS/NZS CISPR 15 Test Frequency Range: 9kHz to 30MHz Receiver setup: RBW=9kHz, VBW=30kHz Limit: Test setup: Frequency range (MHz) Limit (dbuv) Quasi-peak Average * to 56* 56 to 46* * Decreases with the logarithm of the frequency. Test procedure The E.U.T and simulators are connected to the main power through a line impedance stabilization network(l.i.s.n.). The provide a 50ohm/50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refers to the block diagram of the test setup and photographs). Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to EN55022 Class B on conducted measurement. Test Instruments: Temp.: 24 C Humid.: 51% Press.: 1 012mbar Measurement Record: Test Instruments: Test mode: Test results: Refer to section 6 for details Refer to section 5.3 for details Passed Uncertainty: ±3.45dB Telephone: +86 (0) Fax: +86 (0) Page 12 of 23

13 Measurement Data Test mode: On mode Phase Polarity: Line Telephone: +86 (0) Fax: +86 (0) Page 13 of 23

14 Test mode: On mode Phase Polarity: Neutral Telephone: +86 (0) Fax: +86 (0) Page 14 of 23

15 7.3 Radiated Electromagnetic Disturbance (9kHz-30MHz) Test Requirement: Test Method: Test Frequency Range: Class / Severity: Limit: AS/NZS CISPR15 AS/NZS CISPR15 9kHz to 30MHz Table 3a of AS/NZS CISPR15 Frequency range (MHz) Limits for loop diameter db(μa)a 2m to 58* to22* *Decreasing linearly with the logarithm of the frequency. For electrodeless lamps and luminaires, the limit in the frequency range of 2,2 MHz to 3,0 MHz is 58 db(μa) for 2 m, 51dB(μA) for 3 m and 45 db(μa) for 4 m loop diameter. Detector: Peak for pre-scan 200Hz resolution bandwidth between 9kHz & 150kHz 9kHz resolution bandwidth between 150kHz & 30MHz Quasi-peak scan if maximised peak with 6dB of quasi-peak limit Test Instruments: Temp.: 25 C Humid.: 50% Press.: 1 012mbar Measurement Record: Test Instruments: Test mode: Test results: Test procedure Refer to section 6 for details Refer to section 5.3 for details Passed Uncertainty: ± 4.5dB An initial pre-scan was performed in the 2m loop antenna using the spectrum analyser in peak detection mode. The EUT was measured for X(A), Y(B), Z(C) polarities. No further quasi-peak measurements were performed since no peak emissions from the EUT were detected within 6dB of the limit for 2m diameter loop antenna. Telephone: +86 (0) Fax: +86 (0) Page 15 of 23

16 Measurement Data X: Telephone: +86 (0) Fax: +86 (0) Page 16 of 23

17 Y: Telephone: +86 (0) Fax: +86 (0) Page 17 of 23

18 Z: Telephone: +86 (0) Fax: +86 (0) Page 18 of 23

19 8 Test Setup Photo Radiated Emission Conducted Emission Telephone: +86 (0) Fax: +86 (0) Page 19 of 23

20 Radiated Electromagnetic Disturbance Telephone: +86 (0) Fax: +86 (0) Page 20 of 23

21 9 EUT Constructional Details Telephone: +86 (0) Fax: +86 (0) Page 21 of 23

22 Telephone: +86 (0) Fax: +86 (0) Page 22 of 23

23 ------End Telephone: +86 (0) Fax: +86 (0) Page 23 of 23