Standards Update. Mylaraiah J N, RCDD Member, BICSI India Steering Committee

Transcription

1 Standards Update Mylaraiah J N, RCDD Member, BICSI India Steering Committee

2 Standards Update International Standards Interrelations

3 Reference Guide Standard ISO/IEC CENELEC TIA/EIA Performance / Generic Cabling N/A EN :2011 TIA 568C.0 2; 568C.3x Office Cabling ISO/IEC ed. 2.2 (incl. A1 EN incl. AA TIA 568C and 2 and A2) Industrial Cabling ISO/IEC EN TIA 1005A Residential Cabling ISO/IEC EN TIA 570C Data Centre Cabling ISO/IEC EN TIA 942A Building Automation ISO/IEC pren TIA 862A Measurement IEC EN N/A Measurement fibre optics ISO/IEC :2012 EN incl. A1 and A2 TIA (SM) TIA (MM) Administration ISO/IEC EN incl. A1 TIA 606B Installation/pathways and spaces ISO/IEC and ISO/IEC EN incl. A1 TIA 569C Grounding/Bonding IEC EN 50310:2010 TIA J STD 607A MICE Tutorial / Technical Report TR See ISO TSB 185 WLAN TR See ISO TSB 162 PoE TR See ISO TSB 184

4 Standards Update IEEE Working group that develops standards for Ethernet based LANs

5 IEEE 802.3bm Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 40 Gb/s and 100 Gb/s Operation Over Fiber Optic Cables Next Generation 40 Gb/s and 100 Gb/s Optical Ethernet Defining 40GBASE ER4 (40km) solution over SM Low cost 40G adoption in metropolitan applications Defining 100GBASE SR4 solution over MM 4x25G optical interface for MMF Transmits at 25 Gb/s instead of 10 Gb/s Reduces number of transmission lanes from 10 to 4 Reduces cost (reduce lane count & complexity) Easy migration from 40 Gb/s Defining 100GBASE nr4 solution 4x25G optical interface for SMF Focus on data center application Support at least 500m Defining a 4x25 Electrical Interface CAUI 4 (C Attachment Unit Interface) 100 Gb/s 4 lane electrical interface Current Draft (standard expected early 2015): OM3 support of 100GBASE SR4 is specified at 70 m. OM4 support of 100GBASE SR4 is specified at 100 m. 40GBASE ER4 is specified for an operating range of 2 m 30 km. Links longer than 30 km (up to 40 km) are considered engineered links and must have attenuation headroom to meet the link power budget. No support for 100GBASE nr4

6 IEEE 400 GbE Study Group (will be 802.3bs) Formed in March, 2013 Goal is to provide physical layer specifications which support the following link distances: At least 100m over MMF At least 500m over SMF At least 2km over SMF At least 10KM over SMF 1st generation will probably use 16 x 25Gbps signaling 2nd generation expected to use 8 x 50 Gbps signaling 3rd generation expected to use 4 x 100 Gbps signaling

7 IEEE 802.3bp Reduced Twisted Pair Gigabit Ethernet (RTPGE) Support 1Gb/s over a single twisted pair for at least 15 m For users and producers in automotive, industrial controls, and transportation (aircraft and rail) industries Define performance characteristics for an optional link for industrial controls, automation and transportation applications with a goal of at least 40m reach Define optional Energy Efficient Ethernet Investigating how to prioritize traffic in a time sensitive environment Manufacturers of industrial control systems are interested in this

8 IEEE 802.3bq Standard for 40GBASET 40 Gbps Ethernet over balanced twisted pair Define link segment based on copper media specified by ISO/IEC JTC1/SC25/WG3 and TIA TR pair, balanced twisted pair copper cabling Up to 2 connectors Up to at least 30 meters Initiated work on Cat 8 in TIA Data Center application Server to server connection End of row or middle of row

9 Standards Update TR 42 Engineering Committee on Telecommunications Cabling Systems

10 Network Security TR 42.1 Commercial Building Telecommunications Cabling Developing new Network Security Standard Provide guidelines for security of the telecommunications cables, pathways, spaces, and other elements of the physical infrastructure Include design guidelines, installation practices, administration, and management No document number assigned TIA D Generic Telecommunications Cabling for Customer Premises Committee ballot comments resolved Changed MUTOA de rating table to be more generic Changed patch cord installation recommendation to maintain at least 4x OD for bend radius (was 1x) Going out for industry ballot TIA D Commercial Building Telecommunications Cabling Standard Going out for industry ballot Note new naming format (i.e. instead of the current format TIA 568 C.0)

11 TR 42.7 Telecommunications Copper Cabling Systems Continue work on Category 8 draft, 568 C.2 1 FTP / UTP TBD Cable: 22 AWG to 24 AWG Cord cable: 22 AWG to 26 AWG RJ 45 (8p8c) most likely 2 connector model (only) Proposed cabling length(s) PL changed from 90 m to 24 m (79 ft) TBD Patch cord length dependent on de rating factor Task groups to define measurement & field testing Task group to look at other data center applications for Cat 8

12 TR 42.3 Commercial Building Telecommunications Pathways and Spaces Working under progress on D revision of 569 (to be ANSI/TIA 569 D) Reviewed possible changes to the document to address questions/clarification/concerns about the unit of measure conversions conduit sizing and bends room sizing and pull box selection D revision will also include addendums to C revision including ASHRAE changes

13 TR 42.1 Commercial Building Telecommunications Cabling DAS (Distributed Antenna System) On draft Places of Assembly (e.g. Stadiums, airports) On hold TSB 162 A: Telecommunications Cabling Guidelines for Wireless Access Points Pre cabling using the square cell strategy that allows easy plug in and flexible positioning of WAPs Maximize 18m square cell that can be smaller to allow higher data rates or support increased occupancy Category 6A cabling to each WAP for higher data rates and increased power delivery Approved for publication

14 TR 42.1 Commercial Building Telecommunications Cabling ANSI/TIA 4966 Telecommunications Infrastructure Standard for Educational Facilities Specifies telecommunications infrastructure requirements for educational buildings and spaces. Recommends cabling, cabling topologies, and cabling distances for wide range of services & systems Defines pathway & spaces requirements specific to educational facilities Does not conflict with BICSI s K 12 or Post Secondary Being published as ANSI/TIA 4966 TIA 862 B New Revision Building Automation Systems Cabling Standard Will include more IP based systems

15 TR Sustainable Information Communications Technology New Group Created in 2012 Working on draft standard for User Guide on rating system Bring sustainability to the process of planning, designing, integrating and operating technology systems Includes design of structured cabling systems Similar in concept to LEEDs but LEEDs just for building structure

16 TR Optical Fiber Systems Completed ballot comment resolution on D IEEE request TIA change SM connection return loss TIA changing return loss for single mode from a minimum of 26 db to a minimum of 35 db Harmonizes with Will be in D TG evaluating comments regarding addition of PON splitter specs Presentation made in January on necessary additions to D to include splitters Another ballot will be circulated; not all suggestions were implemented Working on TSB to define connector & splice loss TIA lists max loss at.75 db TSB defines connection grades with loss values associated with grade Grades define connection loss less than.75 db

17 TR Subcommittee on Optical Fiber & Cables Main work on Bend Insensitive Multimode Fiber (BIMMF) Harmonizing multiple fiber documents with ISO & updating BIMMF designs being considered Working on defining testing requirements for BIMMF What reference method to use Whether BIMMF cords must be used for launch and receive cords

18 TR Passive Optical Devices & Fiber Metrology Approved project for new FOCIS document 1x16 and 2x16 Multifiber Push On connector Will be FOCIS 18 1x16 is similar to 12 fiber MPO & 2x16 similar to 24 fiber MPO (FOCIS 5) Requires new FOCIS document because connector requires different distance between guide holes Needs to be completed before 400 GbE released 2016 at the earliest

19 Automated Infrastructure Mgt (AIM) Systems

20 AIM This might pave the road for a new standard describing a physical layer software interface and command set allowing networking- DCIM- and facility management software to integrate physical layer information

21 TIA 942A Data Center Standard Highlights Remove support for Cat 3 & Cat5e for Horizontal Cabling, retain for backbone cabling for console connections, telephone/modem lines, WAN circuits Making Category 6 the minimum requirement for horizontal cabling in the data center, recommendations to use Cat6A or higher For multi mode fiber, OM3 optical fiber is now the minimum requirement (along with recommendations to use OM4 optical fiber when possible) Retain Singlemode fiber and 734/735 Coax For connectors, synchronizing with international and European standards to use the LC connector for 1 or 2 fibers and the MPO connector when terminating more than 2 fibers. Eliminated the 100 meter channel length restriction for horizontal cabling using optical fiber cable (now determined on application basis)

22 TIA 942A Data Center Standard Highlights For more flexibility in data center design, added a new distribution and cross connect space to the intermediate distribution area and the intermediate cross connect, which allows support of large data centers much more easily Energy Efficiency Wider range of Temp & Humidity based on new ASHRAE TC 9.9 guidelines Use of enclosure or enclosure system to improve energy efficiency (Cabinets with isolated supply or return, cabinet cooling system, hot or cold aisle containment, panels & cable mgt that reduce air bypass, brushes/grommets on floor tiles 3 Level Lighting protocol Lighting levels based on occupancy & function (1. Lighting levels to be min when the space is not occupied enough for a video surveillance 2. Initial entry Safe passage 3.Occupied 500 Lux Recommended the usage of energy efficient lighting such as LED

23 BICSI Standards ANSI/BICSI , Data Center Design and Implementation Best Practices ANSI/BICSI 002 provides a best practices and implementation standard that will complement TIA,CENELEC, and ISO/IEC data center standards. It is primarily a design standard, with installation requirements and guidelines primarily related to implementing a design. today s data center designer is required to have knowledge of mechanical, electrical and telecommunications systems and how they interact areas not typically found in the same reference manual or standard. As data centers continue to evolve, so too will this standard. Already in discussion are the expanding of facility availability and international information, and the addition of "green" technology and data center efficiency beyond PUE/DCiE. Table of Contents in BICSI 002 Standard 1 Introduction 2 Scope 3 References 4 Definitions, Acronyms, Abbreviations, And Units Of Measurement 5 Space Planning 6 Site Selection 7 Architectural 8 Structural 9 Electrical Systems 10 Mechanical 11 Fire Protection 12 Security 13 Building Automation Systems 14 Telecommunications 15 Information Technology 16 Commissioning 17 Data Center Maintenance Annex A: Design Process (Informative) Annex B: Reliability And Availability (Informative) Annex C: Referenced Documents (Informative)

24 Healthcare Facility Cabling TIA 1179 TIA 1179 is a single reference for a standards based structured cabling system for healthcare facilities Normative references (all TIA): 568 C.0 (Generic) 568 C.2 and 1152 (Copper Cabling Components) 568 C.3 (Fiber Cabling Components) 569 B (Pathways and Spaces) 606 A (Administration) 607 (Grounding and Bonding) 758 (Outside Plant Cabling) 862 (Building Automation Systems) BICSI , Information Technology Systems Design and Implementation Best Practices for Healthcare Institutions and Facilities

25