ANSI/BICSI , Information Transport Systems Design Standard for K-12 Educational Institutions

Transcription

1

2 ANSI/BICSI , Information Transport Systems Design Standard for K-12 Educational Institutions Terry W. Hochbein RCDD/NTS/OSP ATSR Architects/Engineers

3 Forward PURPOSE This Standard specifies minimum requirements and guidelines for the design of Information Transport Systems (ITS) infrastructure for K-12 educational institutions. It is intended to be used by K-12 facility owners, facility operators, architects, engineers, telecommunications and information technology (IT) consultants, project managers, and telecommunications/it technology installers. It is not intended to be the sole source of information for the design of ITS for K-12 institutions

4 K-12 DESIGN STANDARD The K-12 standard is a design standard It references many existing industry standard ANSI-J-STD-607-A, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications. ANSI/NECA/BICSI-568-A, Standard for Installing Commercial Building Telecommunication Cabling. ANSI/TIA B, Optical Fibres Part 1-40: Measurement Methods and Text Procedures Attenuation. ANSI/TIA-570-B, Residential Telecommunications Infrastructure Standard ANSI/TIA/EIA-526-7, Measurement of Optical Power Loss of Installed Singlemode Fiber Cable Plant. ANSI/TIA/EIA A, Optical Power Loss Measurement of Installed Multimode Fiber Cable Plant. ANSI/TIA/EIA-568-B.1, Commercial Building Telecommunications Cabling Standard Part 1: General Requirements. ANSI/TIA/EIA-568-B.2, Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components. ANSI/TIA/EIA-606-A, Administration Standard for Commercial Telecommunications Infrastructure. ASTM E814-02, Standard Test Method for Fire Tests of Through-Penetration Fire Stops IEEE C2-2007, National Electrical Safety Code ISO/IEC 11801, Cabling Standards NFPA , National Electrical Code. TIA TSB-140, Additional Guidelines for Field Test Length, Loss and Polarity of Optical Fibers. ds

5 K-12 DESIGN STANDARD Generic Infrastructure The generic infrastructure specified includes the following: Horizontal Cabling Multi-User Telecommunications Outlet Assembly (MUTOA) Consolidation Point (CP) Backbone Cabling Telecommunications Enclosures Test Requirements Labeling Grounding & Bonding Firestop Systems Security Systems Wireless System Master Clock System Distance Learning

6 K-12 DESIGN STANDARD Educational Spaces The standard covers the five following major types of educational spaces: Classrooms Administrative Offices Arts Spaces Physical Education Spaces Building Services

7 K-12 DESIGN STANDARD Educational Spaces The standard provides design requirements for each educational space: General Description of the educational spaces Telephone Outlet Requirements Network Outlet Requirements CATV Outlet Requirements Audio/Video (A/V) Outlet Requirements Public Address System Requirements Intercom System Requirements Pathway Requirements Media Cable Requirements

8 K-12 DESIGN STANDARD Educational Spaces - Classrooms The standard provides design requirements for classroom spaces: Telephone Outlet shall have a minimum of 1 outlet Network Outlet shall have minimum of 6 outlets should have wireless coverage CATV Outlet shall have a minimum of 1 outlet

9 K-12 DESIGN STANDARD Educational Spaces Classrooms (cont.) The standard provides design requirements for classroom spaces: Audio/Video (A/V) should have provisions for electric ceiling mounted or wall mounted screen should have cabling for a projector (typically ceiling mounted) and speakers from the teaching position should have USB connections when intelligent whiteboards are deployed should have provisions for musical instrument digital interfaces (MIDI) when deployed should have mounting hardware, ITS and control cables when monitors are used and shared by a computer, television and the A/V system should have a sound reinforcement system for recording and playback of in-room programming and playback of recorded material. the sound reinforcement system shall have an amplifier and a minimum of one microphone

10 K-12 DESIGN STANDARD Educational Spaces - Classrooms (cont.) The standard provides design requirements for classroom spaces: Public Address System shall be extended into the classroom Intercom System a public address, intercom, telephone should be provided Pathway Requirements outlets shall have conduits or equivalent pathways extended to accessible ceiling Media Balanced Twisted Pair shall be a minimum of Cat 5E/Class D Multimode Optical Fiber 62.5/125 - shall be a minimum of 200/500MHz per Km bandwidth 50/125 - shall be a minimum of 500/500MHz per Km bandwidth SVGA cable with 15 pin connectors and an S-video cable for projector Series 6 quad-shield coax Proprietary cables shall conform to manufactures specifications

11

12 Mulitmedia Outlet Details

13 Thank You! K-12 Standards Subcommittee Members Especially: Todd Taylor, Editor John Kacperski, Secretary

14 Post Secondary Standard Currently under development Expected publication Fall 2010 Terry Hochbein, Chairman Mark King, Secretary

15 Questions? Terry W. Hochbein, RCDD NTS/OSP» Senior Technology Designer» ATSR Architects/Engineers Office Cell

16

17

18

19

20

21

22 BICSI Data Center Standard Update Jonathan Jew J&M Consultants, Inc. John Kacperski UCLA Medical Center

23 Scope ANSI/BICSI-002 Data Center Design and Implementation Best Practices Standard An international standard, not just U.S. Meant to supplement, not replace existing data center cabling standards such as TIA-942 and CENELEC EN Large committee of experts (150) Large document (~500 pages) covering a wide range of subjects

24 Subjects Covered Site Selection Architectural and Structural Design Electrical Systems Mechanical Systems (i.e., HVAC) Fire Protection and Security Building Automation Systems Commissioning Maintenance

25 Subjects Covered Telecommunications Access Providers & Entrance Facilities Telecom Spaces Cabinets & Racks Cabling Pathways Telecom Cabling Field Testing Telecom Administration Information Technology

26 Status Completed 3 rd Industry Ballot Balloting continues until consensus is reached among subcommittee members and canvass list members Desire is to publish as soon as possible

27

28

29 NECA/BICSI Telecommunications Bonding and Grounding Planning and Installation Methods for Commercial Buildings

30 Highlights of NECA/BICSI 607 Busbar to Equipment New Terminology Emphasis on Installation Techniques

31 Telecommunications Room Bonding Jumper Telecommunication Equipment Bonding Conductor (TEBC) Rack Bonding Conductor (RBC) Grounding Equalizer (GE) Vertical Rack Grounding Busbar (RGBV) Telecommunications Grounding Busbar (TGB) Unit Bonding Conductor (UBC) Telecommunications Bonding Backbone (TBB)

32 Equipment & Rack Bonding Option 1 Option 1 Equipment attached to a rack bonding conductor (RBC) From rack/cabinet to TEBC Requires multiple cutting and stripping of the RBC Requires multiple irreversible connections * NECA/BICSI-607

33 Equipment & Rack Bonding Option 2 Option 2 Horizontal rack grounding busbar mounted on top or bottom of the rack/cabinet equipment bonded directly to the busbar with a unit bonding conductor (UBC) UBCs may be longer Adds to the complexity of cable management

34 Equipment & Rack Bonding Option 3 Option 3 Vertical rack grounding busbar runs length of rack/cabinet equipment bonded directly to the busbar with a unit bonding conductor (UBC) Preferred option resulting in short lengths of UBCs

35 Equipment & Rack Bonding Unacceptable practice series or daisy chain connected equipment bonding conductors * NECA/BICSI-607

36 Connecting to the Busbar Remove surface debris with an abrasive pad Apply thin coating of anti-oxidant compound where connection takes place

37 Connecting to the Busbar Attach lugs to the busbar stainless steel or silicon bronze hardware tighten to the appropriate torque rating

38 Summary These are just a few examples of the additions made.. Hopefully, these allow for a better understanding of proper bonding and grounding techniques

39

40

41 ANSI/NECA/BICSI-568, Installing Commercial Building Telecommunications Cabling Bob Jensen, RCDD

42 Purpose This standard not only covers the installation and safety requirements for telecommunications cabling, it focuses on criteria that aid in delivering performance levels expected by end-users To promote telecommunications infrastructure installation training National Electrical Code (NEC) references Provide guidance to installation trades

43 History ANSI/NECA/BICSI-568 is based upon BICSI s Telecommunications Cabling Installation Manual 1998 BOD approved joint standard with NECA 2001 Joint standard published 2006 Joint standard revised The first standard to address the importance of proper telecommunications infrastructure installation

44 Participating BICSI Members Ray Keden Al Feaster Donna Ballast Bob Jensen Ed Phillips Bob Faber Phil Janeway Ray Emplit Richard Anderson Joe O Brien Mel Lesperance Pete Olders Alvin Emmett Darron Wright Don Wright Charlie Mann

45 Scope This Standard describes minimum requirements and procedures for installing the infrastructure for telecommunications including balanced twisted pair copper cabling and optical fiber cabling that transport telecommunications signals (e.g., voice, data, video). Installers should always follow applicable codes and manufacturers instructions. This Standard is intended to be used in describing a neat and workmanlike manner as referenced by ANSI/NFPA 70, the National Electrical Code (NEC).

46 The NEC Relationship Mechanical Execution of Work. Communications circuits and equipment shall be installed in a neat and workmanlike manner. FPN: Accepted industry practices are described in ANSI/NECA/BICSI , Installing Commercial Building Telecommunications Cabling

47 Contract documents Recommended text contained within this standard Commercial building telecommunications cabling shall be installed in accordance with NECA/BICSI , Installing Commercial Building Telecommunications Cabling (ANSI). More and more construction specifications are referring to this standard

48 Support Structures Contents Allow installation of telecommunications wire, cable, connecting hardware, and associated apparatus. Pathways Route survey and planning Cable trays (supporting, various types) Conduit (length limitations, bends, securing, bonding) Spaces Plywood backboards (securing to walls) Equipment racks, cabinets (wall and floor mounted) Bonding Cable support systems (J-hooks) Separation from possible EMI sources

49 Contents Pulling cable Setup Horizontal and backbone cables Horizontal and vertical pathways Open ceiling Preferred optical fiber premises cable jacket colors Firestopping Re-establishing the integrity of fire rated walls, floors, and ceilings is an essential part of a cabling installation. Ten basic types of firestop Typical installations illustrated

50 Contents Cable Terminations and Splicing Fiber and Copper Color codes Dressing cables for termination Installation verification Visual inspection and performance test documentation are required for proof of proper installation conformance

51 Testing Copper Permanent link Channel Optical fiber Contents OLTS, OTDR optional OLTS One jumper reference; mandrel on launch cord Length, polarity, attenuation

52 Status Can be obtained from BICSI der_now.aspx Due for revision by 2011 Items to cover Category 6A OM4 Other items of interest Contact:

53

54