Total Primary. Total Secondary. Total. To be estimated by the bidder. Mtr. To be estimated by the bidder. To be estimated by the bidder

Size: px

Start display at page:

Download "Total Primary. Total Secondary. Total. To be estimated by the bidder. Mtr. To be estimated by the bidder. To be estimated by the bidder"

Barnard Marshall
5 years ago
Views:

1 SBI, Hyderabad Data Center - Passive Bill Of Material Note: The product and the installation of passive equipments should be as per ANSI/TIA 568 C.2 and C.3 standard related to UTP and Fiber cabling repsectvely. Quantity: to be estimated. Each Phase will consider each pod of 252 racks. Sr.No. Requirement Details Description UoM Qty UOM PHASE - 1 PHASE - 2 PHASE - 3 PHASE - 4 General Requirement Designing the cabling solution Bidder has to design, lay and test the cabling to cater the DC requriements. Cabling will be done in phases and bidder has to arrange for the same as and when required. Design considerations: A1 (a) Network Rack should have a patch rack for Cross Connectivity to Server Rack in each PoD (b) Any Add / Move / Changes, passive engineer should not do any activity on Active Switch rack at Network / Spine Rack. (c) Solution should provide the Managed Patching between the Server resource panel and active switch resource panel in the Patch Rack itself. (d) All Intelligent panels should connect the Collector device. Copper and Fiber Panel should be integrate with same Collector device. General Requirements a) Cabling system shall include factory-terminated system components which can be quickly mated to form an end-to-end optical link between patching locations and/or equipment ports. b) Cabling Solution should be a high density system solution with reduced installation time. c) Cabling system shall be a modular solution and should offer a greater degree of flexibility in managing equipment moves, adds, or changes. d) Cabling solution should maintain proper system polarity and for a proper polarity system solution should not require any two types of modules or two different types of patch cord in system. e) OEM shall submit the certificate stating bend insensitive glass is supplied for this project and also attenuation report of fiber used. f) Fiber cable & jumper shall have OM3/om3/om4 fiber with bend insensitive fiber. Trunk cable and jumper A2 should be able to withstand banding radius of 3 times the outer diameter. Macro bend loss in fiber cable and jumper shall not be more than 0.2 db when 2 turns are mode in a 7.5 mm mandrel and 0.1 db when 2 turns are made in a 15 mm mandrel. g) All Passive Components should be RoHS (Restriction of Certain Hazardous Substances) complied. Declaration RoHS Compliant should clearly be mentioned on datasheets of each Passive Components. h) There should be 25 year extended product warranty and Application Assurance i) All specification and relevent documents should be available on public domain j) All the passive component should meet the given Global standards. k) Supporting data sheet should be same for all geographical location of manufacturer. Fibre Cable a) Optical Fibre Cable shall have om3/om4 fiber with bend insensitive fiber. the cable should be able to withstand banding radius of 3 times the outer diameter. b) Maximum insertion loss in MTP connector should be 0.25 db c) Maximum reflectance loss in MTP connector should be <-20 db A3 e) Trunks cable shall be manufactured with ultra-bendable fiber and meet the fiber performance mentioned in below table 1: Fiber Attenuation max 850 nm 2.8 Fiber Attenuation max 1300 nm 1.0 f) Trunks shall be constructed with MTP male (with pin) connectors at both ends A4 UTP (Un-Twisted Pairr) cable Cat 6 or Cat 6A STP with 23 AWG Soid Cable. It should be LSZH with UL Listed and ETL Verified accordance to Standard EIA/TIA 568.C.3 for Performance and 3rd party tested for Flame rating. A5 Leaf Racks (atleast 950) to spine a) Trunk cable shall have om3/om4 fiber with bend insensitive fiber. Trunk cable should be able to withstand Racks: 40/100G connectivity banding radius of 3 times the outer diameter. b) (Should provide required uplink Maximum insertion loss in MTP connector should be 0.25 db ports) in each Pod and within c) Maximum reflectance loss in MTP connector should be <-20 db PoDs e) Trunks cable shall be manufactured with ultra-bendable fiber and meet the fiber performance mentioned in below table 1: Fiber Attenuation max 850 nm 2.8 Fiber Attenuation max 1300 nm 1.0 f) Trunks shall be constructed with MTP male (with pin) connectors at both ends g) Fiber Trunk count shall be available in 12, 24, 36, 48, 72, 96, 144. Leaf Racks Fiber Termination ############################################################################## A6 using MPO/MTP connector in each Leaf Rack for SPINE connectivity SPINE Racks Fiber Termination A7 using MPO/MTP connector in each SPINE Rack for Leaf connectivity ############################################################################## A8 A9 Leaf Racks Fiber Patch Cord ############################################################################## switches for uplink for SPINE connectivity) SPINE Racks Fiber Patch Cord switches for uplink for Leaf interconnectivity) ##############################################################################

2 A10 SPINE Racks Fiber Patch Cord switches for uplink for Leaf same ############################################################################## rack connectivity) Intelligent MPO Cassette at Network Racks (a) Type : MPO cassettes shall house OM3/OM4 Multi Mode/Single mode, 24-fiber or 2 Nos 12-Fiber Cassette ( 12 Duplex Port) and have LED to detect the Physical connectivity of Patch Cord. (b) Standard :MPO cassettes shall meet the most recent revision of TIA/EIA-568-C.3 standard. (c) The solution should provide a Dash Board to get information from the database and represent it for use in various formats like gauges, charts etc. to enable quick analysis of the data. Alerts should be customizable. This would be the main interface for the networking team. (d) The Intelligent Physical Layer Management Solution should have guidance lights per port. The light guidance A11 is mandatory for tracing the two ends of any patch cord, executing planned work orders and for remote management. (e) LED guidance based Scheduled Work Orders The solution should have the capability to create and assign work orders to technicians. It should - Ensure the ability to create, assign and monitor the status of any work order to any technician. Warn of a mismatch between requested activity and real status through ongoing scanning activity and LED guidance. Automatically update the database upon completion of task. (f) Managed Patching Software should integrate with Power Distribution Software from day one to get seamless managibility. Intelligent Controller for Intelligent Collecting device should be High Density. It shall control 12 or 24 Panels. Controller should have at A12 Network Rack least 3 or 4 Switch port for different network connectivity. Panel to Controller connectivity should be on generic Cable, not the the propritory jumpers. Intelligent cabling features: (a) Complete link information - The solution should automatically provide complete linkage information (from switch port up to the end device) in graphical format, providing full end-to-end visibility and automatic updates of new locations when moves occur. (b) Real time view of Communication Racks The solution should provide information of the rack layout in graphical view and allow interaction with displayed information in real time (e.g. lighting an LED over an panel port remotely). This is extremely important for remote site management. (c) Utilization Module The solution should be capable to collect information of the activity at each switch port A13 & identify unused switch ports. This is necessary to optimize the usage of switch ports. (d) Graphical Layout View - The solution should have the capability to import floor layout plans in dwg CAD, jpeg, bmp formats to show the geographical locations of each asset in the entire network down to each room, hall, cubicle and desk in the enterprise. (e) Power down time - In case any changes are made to the network (patching) during a planned (power) down time, the solution should be able to register and report the changes if any during the power down time, once the system is up again, without any human intervention. (f) Integration to 3rd party software - The solution should provide a comprehensive open-ended solution e.g. an SDK (software development Kit) and not just the capability to send SNMP traps to integrate the solution with Inter Leaf Rack Passive Details 4 rack, with Cat 6 or Cat 6A STP with 23 AWG Soid Cable. It should be LSZH with UL Listed and ETL Verified accordance to B1 between each leaf racks - UTP Standard EIA/TIA 568.C.3 for Performance and 3rd party tested for Flame rating. Cable 4 B2 rack, with 24 between each leaf racks - UTP Jack Pannels Cat 6 or Cat 6A STP Panel should be High Density to save the rack space. It should have height of 1U for 24 ports. Panel Should be UL Listed. B3 UTP Patch Cord for connecting to ToR switches - 3 Cat 6A STP Patch Cord should be multi starnded and Factory made. Patch cord should be UL Listed and ETL Verified. B4 4 rack, with between each leaf racks - UTP 24-Core MM 50/125 micron om3/om4 Indoor Fiber Cable, LSZH Cable B5 4 cluster rack, with 24 port provision between each leaf racks - Fiber LC MPO cassatte 48F, 1U, LC MM om3/om4 MPO with accessories B6 Fiber Patch Cord for connecting to ToR switches - 3 LC-LC Multimode 50/125 micron Duplex Patch Cord, 3 Meter POD SPINE Rack to Core Rack Passive Details C1 C2 SPINE Racks to Core Rack 40/100G connectivity 24 port Cable from Each SPINE RACK to Core RACK (Should provide required uplink ports) SPINE Racks Fiber Termination using MPO/MTP connector in each SPINE Rack for Core Connectivity using 40/100G 24F, 1U, MM om3/om4/single Mode MPO Cassatte with Accessories with Sockets uplink Core Racks Fiber Termination using MPO/MTP connector in C3 each Core Rack for SPINE Connectivity using 40/100G uplink 48F, 1U, MM om3/om4/single Mode MPO Cassatte with accessories with Sockets SPINE Racks Fiber Patch Cord C4 switches for uplink for core connectivity) Optical Fiber duplex patch cords shall comprise of om3/om4 Fiber with compact connector for easy installation and it should be LSZH, LC-LC type Bend Insensitive. Core Racks Fiber Patch Cord C5 Optical Fiber duplex patch cords shall comprise of om3/om4 Fiber with compact connector for easy installation switches for uplink for Leaf interconnectivity) and it should be LSZH, LC-LC type Bend Insensitive.

3 Core Racks Fiber Patch Cord C6 Optical Fiber duplex patch cords shall comprise of om3/om4 Fiber with compact connector for easy installation switches for uplink for Leaf same and it should be LSZH, LC-LC type Bend Insensitive. rack connectivity) Core Racks Passive Details D1 Core 1 and Core 2 Rack with 24 Cat 6 UTP with 23 AWG Soid Cable. It should be LSZH with UL Listed and ETL Verified accordance to Standard EIA/TIA 568.C.3 for Performance and 3rd party tested for Flame rating. D2 Core 1 and Core 2 Rack with 24 Cat 6 UTP Panel should be High Density to save the rack space. It should have height of 0.5 U. Panel Should be UL Listed. D3 Core 1 and Core 2 Rack with 24 patch cords Cat 6 UTP Patch Cord should be multi starnded and Factory made. Patch cord should be UL Listed and ETL Verified. D4 Core 1 and Core 2 Rack with 24 Cat 6 UTP Patch Cord should be multi starnded and Factory made. Patch cord should be UL Listed and ETL Verified. D5 Core racks, with 24 port provision fiber cable run 24-Core MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (40G/100G Uplink connectivity) D6 Core racks, with 24 port provision fiber MPO connector 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets D7 Core racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter D8 Core racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 10 Meter Internet Racks Passive Details E1 Internet 1 and Internet 2 Rack with 24 E2 E3 Internet 1 and Internet 2 Rack with 24 Jack Pannel E4 Internet 1 and Internet 2 Rack with 24 patch Cat 6 SL Series Patch cord - 3 cords E5 Internet 1 and Internet 2 Rack with 24 Jack Cat 6 SL Series Patch cord - 3 Pannel E6 Internet racks, with 24 port provision fiber cable run 24-Internet MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (10/40G/100G Uplink connectivity) E7 Internet racks, with 24 port provision fiber MPO connector 48F, 1U, MM om3/om4/single Mode with accessories with Sockets E8 Internet racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter E9 Internet racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 10 Meter VPN Racks Passive Details F1 VPN 1 and VPN 2 Rack with 24 F2 VPN 1 and VPN 2 Rack with 24 F3 VPN 1 and VPN 2 Rack with 24 patch cords Cat 6 SL Series Patch cord - 3 F4 VPN 1 and VPN 2 Rack with 24 Cat 6 SL Series Patch cord - 3 F5 VPN racks, with 24 port provision fiber cable run 24-VPN MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (10/40G/100G Uplink connectivity)

4 F6 VPN racks, with 24 port provision fiber MPO connector 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets F7 VPN racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter F8 VPN racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 10 Meter WAN Racks Passive Details G1 WAN 1 and WAN 2 Rack with 24 G2 WAN 1 and WAN 2 Rack with 24 G3 WAN 1 and WAN 2 Rack with 24 Cat 6 SL Series Patch cord - 3 patch cords G4 WAN 1 and WAN 2 Rack with 24 Cat 6 SL Series Patch cord - 3 G5 WAN racks, with 24 port provision fiber cable run 24-WAN MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (10/40G/100G Uplink connectivity) G6 WAN racks, with 24 port provision fiber MPO connector 48F, 1U, MM om3/om4/single Mode MPO Cassatte with accessories with Sockets G7 WAN racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter G8 WAN racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 10 Meter T Racks Passive Details H1 T 1 and T 2 Rack with 24 H2 T 1 and T 2 Rack with 24 H3 T 1 and T 2 Rack with 24 patch cords Cat 6 SL Series Patch cord - 3 H4 T 1 and T 2 Rack with 24 Cat 6 SL Series Patch cord - 3 H5 T racks, with 24 port provision fiber cable run 24-T MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (10/40G/100G Uplink connectivity) H6 T racks, with 24 port provision fiber MPO connector 48F, 1U, MM om3/om4/single Mode MPO Cassatte with accessories with Sockets H7 T racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter H8 T racks fiber patch cord LC- Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 10 Meter Core Rack-1&2 to Internet Rack-1&2 Uplinks I1 Core racks and Internet racks, with 24 between each racks 24-Core MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (40G/100G Uplink connectivity) Core Racks to Internet Racks Fiber Termination using I2 MPO/MTP connector in each Core Rack for SPINE Connectivity using 40/100G 48F, 1U, MM om3/om4/single Mode MPO Cassatte with accessories with Sockets uplink Core Racks to Internet Racks Fiber Termination using I3 MPO/MTP connector in each Core Rack for SPINE Connectivity using 40/100G 48F, 1U, MM om3/om4/single Mode MPO Cassatte with accessories with Sockets uplink

5 Core Racks Fiber Patch Cord I4 switches for uplink for internet rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter Internet Racks Fiber Patch Cord I5 switches for uplink for Core rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter Core Rack-1&2 to Mgmt Rack-1&2 Uplinks J1 T 1 and T 2 Rack with 24 J2 T 1 and T 2 Rack with 24 J3 T 1 and T 2 Rack with 24 patch cords Cat 6 SL Series Patch cord - 3 J4 T 1 and T 2 Rack with 24 Cat 6 SL Series Patch cord - 3 Core Rack-1&2 to WAN Edge Rack-1&2 Uplinks K1 Core racks and WAN racks, with 24-Core MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide 24 between each required uplink ports (40G/100G Uplink connectivity) racks K2 Core Racks to WAN Racks Fiber connector in each Core Rack for SPINE Connectivity using 48F, 1U, MM om3/om4/single Mode MPO Cassate with accessories with Sockets 40/100G uplink K3 Core Racks to WAN Racks Fiber connector in each Core Rack for SPINE Connectivity using 48F, 1U, MM om3/om4/single Mode MPO Cassate with accessories with Sockets 40/100G uplink Core Racks Fiber Patch Cord K4 switches for uplink for WAN rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter WAN Racks Fiber Patch Cord K5 switches for uplink for Core rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter Core Rack-1&2 to VPN Edge Rack-1&2 Uplinks L1 Core racks and VPN racks, with 24 between each racks 24-Core MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (40G/100G Uplink connectivity) L2 Core Racks to VPN Racks Fiber connector in each Core Rack for SPINE Connectivity using 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets 40/100G uplink L3 Core Racks to VPN Racks Fiber connector in each Core Rack for SPINE Connectivity using 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets 10/40/100G uplink Core Racks Fiber Patch Cord L4 switches for uplink for VPN rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter VPN Racks Fiber Patch Cord L5 switches for uplink for Core rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter Internet Rack-1&2 to WAN Rack-1&2 Uplinks M1 Internet and WAN Rack with 24 M2 Internet and WAN Rack with 24 M3 Internet and WAN Rack with 24 Cat 6 SL Series Patch cord - 3 patch cords

6 M4 Internet and WAN Rack with 24 Cat 6 SL Series Patch cord - 3 M5 Internet racks and WAN racks, with 24 between each racks 24-Core MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (40G/100G Uplink connectivity) M6 M7 M8 Internet Racks to WAN Racks Fiber Termination using MPO/MTP connector in each Internet Rack and WAN Racks 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets connectivity using 10/40/100G uplink Internet Racks to WAN Racks Fiber Termination using MPO/MTP connector in each Core Rack for SPINE 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets Connectivity using 40/100G uplink Internet Racks Fiber Patch Cord switches for uplink for VPN rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter WAN Racks Fiber Patch Cord M9 switches for uplink for Core rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter VPN Rack-1&2 to WAN Rack-1&2 Uplinks N1 VPN and WAN Rack with 24 N2 VPN and WAN Rack with 24 N3 VPN and WAN Rack with 24 patch cords Cat 6 SL Series Patch cord - 3 N4 VPN and WAN Rack with 24 Cat 6 SL Series Patch cord - 3 N5 VPN racks and WAN racks, with 24-Core MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide 24 between each required uplink ports (40G/100G Uplink connectivity) racks VPN Racks to WAN Racks Fiber N6 connector in each VPN Rack and WAN Racks connectivity using 10/40/100G uplink 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets N7 VPN Racks to WAN Racks Fiber connector in each Core Rack for SPINE Connectivity using 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets 40/100G uplink VPN Racks Fiber Patch Cord N8 switches for uplink for VPN rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter WAN Racks Fiber Patch Cord N9 switches for uplink for Core rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter VPN Rack-1&2 to T Rack-1&2 Uplinks O1 VPN and T Rack with 24 port provision O2 VPN and T Rack with 24 port provision Jack Pannel O3 VPN and T Rack with 24 port Cat 6 SL Series Patch cord - 3 provision patch cords O4 VPN and T Rack with 24 port Cat 6 SL Series Patch cord - 3 provision Jack Pannel O5 VPN racks and T racks, with 24 between each racks 24-Core MM 50/125 micron om3/om4/single Mode Indoor Fiber Cable/MPO cable, wich should provide required uplink ports (40G/100G Uplink connectivity)

7 VPN Racks to T Racks Fiber O6 connector in each VPN Rack and T Racks connectivity using 10/40/100G uplink 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets O7 VPN Racks to T Racks Fiber connector in each Core Rack for SPINE Connectivity using 48F, 1U, MM om3/om4/single Mode MPO Cassattee with accessories with Sockets 40/100G uplink VPN Racks Fiber Patch Cord O8 switches for uplink for VPN rack Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter T Racks Fiber Patch Cord O9 Multimode 50/125 micron Duplex om3/om4/single Mode with LC- Patch Cord, 3 Meter switches for uplink for Core rack Mgmt Rack-1&2 to T Rack-1&2 Uplinks P1 Mgmt and T Rack with 24 P2 Mgmt and T Rack with 24 P3 Mgmt and T Rack with 24 patch cords Cat 6 SL Series Patch cord - 3 P4 Mgmt and T Rack with 24 Cat 6 SL Series Patch cord - 3 We confirm that we comply with all the specifications mentioned above & the terms & conditions mentioned in the RFP Document are acceptable to us. Dated this... day of (Signature) (Name) (In the capacity of) Duly authorised to sign Bid for and on behalf of

8 Requirement Baseline and summary Sr. No. Requirement baseline A Requirement Details Minim um Quanti ty A1 1/10G - UTP DATA Port per Rack A2 10/25G - Optic Fibre DATA Ports per Rack A3 1/10G - UTP Out of Band (OOB) Ports per Rack A4 Number of racks in one cluster for Leaf Networking 4 A5 Number of Server Racks in one server hall (POD) 220 A6 Number of Rack Cluster Units Per Server hall (POD) 55 A7 Number of Server halls (POD) 4 A8 Leaf switches type 1 and 2 to SPINE connectivity over subscription ratio 6:1 Sl no Description Design, Suppy, Installtion, Testing and commissioning of Active Components Solution consisting of following MINIMUM components. Each Phase will consider each pod of 250 racks. Qty OEM MODEL PHASE - 1 PHASE - 2 PHASE - 3 PHASE - 4 B Product Type - Switching B1 440 No's of Supply, Installation, testing and Commissioning of Fibre Leaf Switch (10/25 Gbps Fiber) Lump Sum 2016 Corning Incorporated. All Rights Reserved.

9 B2 440 No's of Supply, Installation, testing and Commissioning of UTP Leaf Switch (1/10 Gbps UTP) with required 40/100G uplink ports to achieve the over subscription ratio Lump Sum B3 440 No's of Supply, Installation, testing and Commissioning of OOB Leaf Switch (1 Gbps UTP) with required 40/100G uplink ports to achieve the over subscription ratio Lump Sum B4 8 No's of Supply, Installation, testing and Commissioning of OOB Aggregation Switch Lump Sum B5 8 No's of Supply, Installation, testing and Commissioning of Spine Switch Lump Sum B6 2 No's of Supply, Installation, testing and Commissioning of Super Spine Switch Lump Sum B7 2 No's of Supply, Installation, testing and Commissioning of OOB Core Switch Lump Sum B8 2 No's of Supply, Installation, testing and Commissioning of DMZ Switch Lump Sum B9 2 No's of Supply, Installation, testing and Commissioning of Wan Edge Switch Lump Sum C Product Type - Routing C1 2 No's of Supply, Installation, testing and Commissioning of WAN Router Lump Sum C2 2 No's of Supply, Installation, testing and Commissioning of Replication Router Lump Sum C3 2 No's of Supply, Installation, testing and Commissioning of Internet Router Lump Sum C4 2 No's of Supply, Installation, testing and Commissioning of Extranet Router Lump Sum D Product Type - Security D1 2 No's of Supply, Installation, testing and Commissioning of Core Firewall Lump Sum D2 2 No's of Supply, Installation, testing and Commissioning of Core NIPS Lump Sum D3 2 No's of Supply, Installation, testing and Commissioning of Internet Firewall Lump Sum D4 2 No's of Supply, Installation, testing and Commissioning of Internet NIPS Lump Sum 2016 Corning Incorporated. All Rights Reserved.

10 D5 2 No's of Supply, Installation, testing and Commissioning of Extranet Firewall Lump Sum D6 2 No's of Supply, Installation, testing and Commissioning of Extranet NIPS Lump Sum D7 2 No's of Supply, Installation, testing and Commissioning of OOB Firewall Lump Sum D8 2 No's of Supply, Installation, testing and Commissioning of OOB NIPS Lump Sum E Product Type - Other E1 2 No's of Supply, Installation, testing and Commissioning of VPN Router Lump Sum F Network Racks F1 40 No's of Supply, Installation, testing and Commissioning of Network Racks Lump Sum G Network Cabling Supply, Installation, testing and Commissioning of Network cabling, as per the switching G1 design requirement. Lump Sum Quantities mentioned as " MINIMUM" are indicative ONLY. System Integrator / Bidder is to note that any increase in the quantities on the above list beyond the "MINIMUM" quantity to implement the solution designed shoul be included in bidder's * NOTE: scope only. We confirm that we comply with all the specifications mentioned above & the terms & conditions mentioned in the RFP Document are acceptable to us. Dated this... day of Corning Incorporated. All Rights Reserved.

12 SUBJECT : Racks with Digital locks, PDU's and DCIM BOQ SL.NO. DESCRIPTION Quantity UNIT OEM MODEL A B C D Network / Server Racks Supply, Installation, Testing & Commissioning of 42U, 600W X 1200D x 2000H (Min) ServerRacks frame with top panel having load bearing capacity of 1500 Kg. Single hinge perforated front door. Split perforated rear doors open in the middle to minimize door swing footprint. Rack should be with swing handle locking with Common Key. A1 Rack shall also include Access controlled Intelligent IP Based Locking mechanism for both the doors. It should be flushed with the door and all the required software for all the racks, cabling, dressing, power adapters, power cables, Digital locks, Swing handles shall be considered to make the system completely functional. Switing handle should work via transponder card and secret pin / numnric key pad numbers at rack level The system should be compatible for centralized architecture and de-centralized architecture. This software from the lock manufacturing OEM should work on 2 party authentication (4 eye principle) and be capable to integrate with proposed 3rd party DCIM/BMS and shall provide the access control system logs and details through integration. Rack cost shall include all the required accessories as per detailed technical specifications of the tender. 880 Nos Supply, Installation, Testing & Commissioning of 42U, 800W X 1200D x 2000H (Min) Network Racks frame with top panel having load bearing capacity of 1500 Kg. Single hinge perforated front door. Split perforated rear doors open in the middle to minimize door swing footprint. Rack should be with swing handle locking with Common Key. A2 Rack shall also include Access controlled Intelligent IP Based Locking mechanism for both the doors. It should be flushed with the door and all the required software for all the racks, cabling, dressing, power adapters, power cables, Digital locks, Swing handles shall be considered to make the system completely functional. Switing handle should work via transponder card and secret pin / numnric key pad numbers at rack level The system should be compatible for centralized architecture and de-centralized architecture. This software from the lock manufacturing OEM should work on 2 party authentication (4 eye principle) and be capable to integrate with proposed 3rd party DCIM/BMS and shall provide the access control system logs and details through integration. Rack cost shall include all the required accessories as per detailed technical specifications of the tender. 169 Nos IP PDU's for Racks B1 B2 Supply, Installation, Testing & Commissioning of Intelligent PDU with Power, Standard Kit plus 2 x 63A Single Phase Vertical PDU with socket configuration 24 Nos x C13 and 6 Nos x C19. Metered Rack PDUs monitor Input current (A), voltage (V), power (kw), apparent power (VA), power consumption (W-hr), crest factor, Power Factor, etc. All the IPDUs/Sensors should be integrating back into centralized monitoring and management software (BMS/DCIM). PDU cost shall include all the required accessories as per detailed technical specifications of the tender. 1 Nos Supply, Installation, Testing & Commissioning of Intelligent PDU with Power, Standard Kit plus 2 x 32A three Phase Vertical PDU with socket configuration 24 Nos x C13 and 6 Nos x C19. Metered Rack PDUs monitor Input current (A), voltage (V), power (kw), apparent power (VA), power consumption (W-hr), crest factor, Power Factor, etc. All the IPDUs/Sensors should be integrating back into A10centralized monitoring and management software (BMS/DCIM). PDU cost shall include all the required accessories as per detailed technical specifications of the tender. 338 Each

13 SUBJECT : Racks with Digital locks, PDU's and DCIM BOQ SL.NO. DESCRIPTION Quantity UNIT OEM MODEL B3 B4 B5 B6 Supply, Installation, Testing & Commissioning of Intelligent PDU with Power, Standard Kit plus 2 x 16A Single Phase Vertical PDU with socket configuration 24 Nos x C13 and 6 Nos x C19. Metered Rack PDUs monitor Input current (A), voltage (V), power (kw), apparent power (VA), power consumption (W-hr), crest factor, Power Factor, etc. All the IPDUs/Sensors should be integrating back into centralized monitoring and management software (BMS/DCIM). PDU cost shall include all the required accessories as per detailed technical specifications of the tender Each Supply, Installation, Testing & Commissioning of Velcro all complete as requiured and as per detailed specifications and final direction and approval of consultant 1 Supply, Installation, Testing & Commissioning of 1U Tool Less Blanking Panel all complete as requiured and as per detailed Reel of 75 feet specifications and final direction and approval of consultant 1 Nos Supply, Installation, Testing & Commissioning of 2U Tool Less Blanking Panel all complete as requiured and as per detailed specifications and final direction and approval of consultant 1 Nos B7 Supply, Installation, Testing & Commissioning of 1U Wire Manager front Only all complete as requiured and as per detailed specifications and final direction and approval of consultant 1 Nos DCIM - Quantity as per the actual requirement C1 Data Center Expert; 25 Node License Only 1 Nos C2 Data Center Expert; 1000 Node License Only 2 Nos C3 Data Center Expert Virtual Machine Activation Key - Physical/Paper SKU 1 Nos C4 Data Center Expert Modbus TCP Output Module 1 Nos C5 Data Center Operation: Capacity 1000 Rack License 1 Nos C6 Data Center Operation 1000 Rack License 1 Nos C7 Data Center Operation: Change 1000 Rack License 1 Nos C8 Data Center Management Software Configuration Suite 1 Nos C9 1 Year Data Center Expert Virtual Machine Software Support Contract 1 Nos C10 1 Year 25 Node Data Center Expert Software Support Contract 1 Nos C11 1 Year 100 Node Data Center Expert Software Support Contract 2 Nos C12 Data Center Operation, 1 Year Software Maintenance Contract, 1000 Racks 1 Nos C13 Data Center Operation: Capacity, 1 Year Software Maintenance Contract, 1000 Racks 1 Nos Quantities mentioned as " MINIMUM" are indicative ONLY. System Integrator / Bidder is to note that any increase in the quantities on the above list beyond the "MINIMUM" quantity to implement the solution designed * NOTE: shoul be included in bidder's scope only. We confirm that we comply with all the specifications mentioned above & the terms & conditions mentioned in the RFP Document are acceptable to us.

14 SUBJECT : EPABX BOQ SL.NO. DESCRIPTION UNIT Quantity OEM MODEL A B C D E F EPABX Active Components State of Art IPPBX systems 1 Equipped with : -150 Nos User IP Extensions -2 Port PRI Card -with option for 32 port FXS Gateway -150 IP Phones (10/100 Mbps Dual Lan Port with PoE) 1 With all class-5 features one box without any additional license like: Multilevel IVRS, CLI, ACD, LCR, Forwarding, and Rating & Charging for user base call control etc. 100% Voice mail Ports (for all extensions) 25 Party Meet me Conference bridge (Multiple room)automatic Schedule conferencing with Admin Panel SIP trunk & VoIP license Inbuilt HDD for 100% Voice recording Nos We confirm that we comply with all the specifications mentioned above & the terms & conditions mentioned in the RFP Document are acceptable to us.

Solutions FOR DATA CENTERS AND STORAGE AREA NETWORKS

Solutions FOR DATA CENTERS AND STORAGE AREA NETWORKS Xtreme12 is Opticonx s Base-12 cabling solution for easy migration of 10/25/40/50/100 and 400G parallel optics deployments in the data center. This