Fiery XF & Fiery proserver 6.2 update What s new. September 2015

Transcription

1 Fiery XF & Fiery proserver 6.2 update What s new September 2015

2 Contents Launch date What s new Availability 2

3 Fiery XF 6.2 launch date 1 st September 2015 Fiery XF - channel All configurations Fiery XF inkjet solutions For EFI Wide Format For VUTEk Fiery proserver Fiery XF for Jetrion 3

4 What s new

5 Four Fiery areas of innovation 5

6 Color

7 Color Profiler Option Continuity with EFI Color Profiler Suite Support for the new EFI ES-6000 M0, M1 and M2 illuminate modes Minor fixes and improvements Faster and superior linearizations, profiles and optimizations! 7

8 Large patch size For low resolution or large dot printers Larger patches equal additional measurements per patch Available for EFI ES-2000 or X-Rite i1pro 2 Available for linearization, profiling and optimization Optimal measurements for lower resolutions and larger picoliter printers! 8

9 Color adjustment improvements Color adjustments can now be used on files containing spot colors All adjustments types can be applied Spot colors however are not affected More flexible job handling, no need to tweak original files! 9

10 Productivity

11 Performance gains for VUTEk users Over 60% average performance increase for all VUTEk users For all VUTEk printer types With Fiery XF or Fiery proserver For single jobs At all resolutions Both error diffusion and stochastic screening (SE1 & SE2) Fastest RIP available for VUTEk printers! 11

12 Faster proserver cut path extraction Cut paths can now be extracted at full speed Applies to both single and multiple path extraction On both single and multi page jobs Even greater overall productivity! 12

13 Improved cut contour extraction Cut paths can now be: Any spot color type On any job layer position Don t need to be on a separate layer Available for all Fiery XF and Fiery proserver users File design flexibility equals more productivity! 13

14 Usability

15 White ink support for cut & crop marks White ink can now be used for cut* and crop marks Only available for printers with white ink Improved mark visibility on black or dark substrates *only for devices supported by our Cut Marks Option Fool proof mark recognition for faster and more reliable finishing! 15

16 Improved cut contour options PDF boxes can now be used as a cut contour path if no cut path exists One of the following can now be selected as a job, or workflow setting Flexibility on file types and automatic control! 16

17 Job positioning Independent job positioning methods can now be used for the x and y axis Example: x could be centered, y positioned numerically Quicker, easier and more accurate job positioning! 17

18 Enhanced OKI printer features Booklet creep function for page positioning for bound documents Creep type Creep paper Creep factor No inner margin for booklets Correct page positioning for professional results! 18

19 Welcome screen Important information for end-users What s new? Did you know? SMSA status Displays at client launch and can be accessed from the help menu Keep users up-to-date more easily! 19

20 Software update information Active information about software updates The server needs to be connected the Internet Stay current! 20

21 Integration 21

22 New cutters in the Cut Marks Option The following new cutting devices are now supported by the Cut Marks Option Aristo Aristomat GL,TL and LFC Colex SharpCut series Multicam Zünd MultiVision cutters L3 C40 and L3 C56 22

23 New printer drivers in Fiery XF 6.2 Agfa JETI Titan S JETI Titan HS Canon imageprograf ipf830 RGB/CMYK Contone imageprograf ipf840 RGB/CMYK Contone imageprograf ipf850 RGB/CMYK Contone EFI VUTEk HSr Pro VUTEk HSr Pro White Epson SureColor SC-F9200 Halftone SureColor P800 Mimaki CJV CJV CJV CJV CJV CJV UJF-3042 FX (white, clear and/or primer) UJF-3042 HG (white, clear and/or primer) UJF-6042 (white, clear and/or primer) 23

24 Updated printer drivers in Fiery XF 6.2 EFI VUTEk Support for the new EFI GSLXr SuperRange ink for EPSON GS3250LXr Pro GS5250LXr Pro (+White) GS5500LXr Pro UD (+ White) New micro weaving for the CMYK Contone mode for SureColor SC S30600 SureColor SC S506X0 SureColor SC S706X0 24

25 OS support for Fiery XF 6.2 Fiery XF 6.1 Server - supported operating systems Windows - Windows 7 (64-bit), Windows 8 (64-bit), Windows 8.1 (64-bit), Windows 2008 R2 (64-bit), Windows 2012 Servers (64-bit) Windows 10 (64-bit) Mac OS X -10.7/8/9, Fiery XF 6.1 Client supported operating systems Windows - Windows 7 (32- & 64-bit), Windows 8 (32- & 64- bit), Windows 8.1 (32- & 64-bit), Windows 2012 Servers (32- & 64-bit) Windows 10 (64-bit) Mac OS X /8/9, Fiery proserver does not support the installation on Windows 10!! 25

26 Fiery XF 6.2 technical overview A Technical Overview Video for the Fiery XF and Fiery proserver 6.2 update is now available: v=ahirjnghr5o&feature=youtu.be 26

27 How to get to Fiery XF 6.2 Customers running Fiery XF 6.1 or can use the online updater at launch Customers running Fiery XF 6.0, first need to update to 6.1, then use the online updater to 6.2 Customers with earlier version than 6, should check their EFI software maintenance status, covered customer should install 6.0, 6.1, then 6.2 Non-maintenance agreement customer need to purchase an upgrade Fiery XF, Fiery XF for VUTEk, Fiery proserver, Fiery XF for Jetrion 1190/$1590/ 1012 coming from Fiery XF /$1990/ 1224 coming from Fiery XF 2-3 (no Jetrion version) Fiery XF for EFI Wide Format 940/$1390/ coming from Fiery XF /$990/ coming from Fiery XF

28 Thank you 28