CERTIFICATE OF ACCREDITATION

Transcription

1 CERTIFICATE OF ACCREDITATION In terms of section 22(2)(b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1), (2) and (3) of the said Act, I hereby certify that:- SABS COMMERCIAL SOC LTD LIGHTING TECHNOLOGY Co. Reg. No.: 2000/013581/07 Facility Accreditation Number: T0085 is a South African National Accreditation System accredited Testing laboratory provided that all SANAS conditions and requirements are complied with This certificate is valid as per the scope as stated in the accompanying schedule of accreditation, Annexure A, bearing the above accreditation number for SAFETY & PERFORMANCE TESTING The facility is accredited in accordance with the recognised International Standard ISO/ 17025:2005 The accreditation demonstrates technical competency for a defined scope and the operation of a laboratory quality management system While this certificate remains valid, the Accredited Facility named above is authorised to use the relevant SANAS accreditation symbol to issue facility reports and/or certificates Mr R Josias Chief Executive Officer Effective Date: 28 February 2013 Certificate Expires: 27 February 2018

2 S C H E D U L E O F A C C R E D I T A T I O N Testing Laboratory Number: T0085 Permanent Address of Laboratory: SABS Commercial SOC Ltd Lighting Technology No 1 Dr Lategan Road Groenkloof Pretoria Postal Address: Private Bag X191 Pretoria 0001 Technical Signatories: Mr T Fourie (All) Mr AMGN Rocha (Safety Glass for motor vehicles, Retro-reflective materials and devices) Mr K Dhimmar (SANS / /SANS / ,SANS /EC & SANS 890-1,SANS 890-2, SANS 1266, SANS 60921/ 60921,SANS 60923/ 60923, SANS / ,SANS / /SANS / Photometry on motor vehicle lights and Lamps: SANS , SANS , SANS , SANS 61184, SANS 60238, SANS 60968, SANS 60969) Ms TE Pheelwane (SANS and all parts 2; SANS , SANS 475: excluding 4.7) Ms P Mokoena (SANS , SANS , SANS , SANS , SANS , SANS ) Mr P Hattingh (SANS 60969, SANS 60968, SANS / :, SANS , SANS all parts and SANS 475; Luminaire Photometry) Mr J Lindeque (SANS/ , SANS/ , SANS/ , SANS/ , SANS/ , SANS/ , SANS/ ,) Mr T Machailoe (SANS/ , SANS/ , SANS/ , SANS/ , SANS/ , SANS/ , SANS/ ,) Mr W Ngobeni (SANS and all part 2 s, SANS 475 : excluding photometric tests) Ms S Matloga (SANS and part 1-5) Nominated Representative: Ms GM Maré Tel: Fax: (012) (012) germa.mare@sabs.co.za Lamps Incandescent lamps, (domestic & automotive) fluorescent lamps, high intensity discharge lamps Issue No.: Date of issue: Expiry date: January February 2018 Types of Tests/Properties Measured, Luminous flux: lumen Dimensions: mm Torsion: 0,5-6,0 N.m Original date of accreditation: 01 August 1998 Page 1 of 5

3 Lamps (continued) Incandescent lamps, (domestic & automotive) fluorescent lamps, high intensity discharge lamps Power: 0-2kW Current: 0-10 A Voltage: V Life: hours Colour: x, y, z system (Automotive) SANS :2013 SANS :2008 SANS 20037:2012 SANS 60968:2013/ Luminaires Photometry Colour: x, y, z system (Automotive) Luminous intensity distribution cd/klm SANS 475:2013 IES Technical Report No 2; CIE Technical Report No 29.2; IES Approved Method for Photometric Testing of Floodlights using Incandescent Filament and Discharge Lamps; CIE Publication No 140 CIE Technical Report No 121 Automotive - Photometry Luminance: cd/m² Luminous intensity distribution: Vehicle lighting: cd SANS 1459:2015 SANS :2006 SANS :2006 SANS :2006 Luminaires safety and performance testing General, domestic, industrial, special application and emergency luminaires; helmet lights and vehicle lights. LITE Construction /impact: go/no-go basis Torsion: 0,5 6,0 N.m Power: 0 3 kw Current: 0 10 A Voltage: V Temperature: C Endurance: hours Colour: x, y, z system (Automotive) Luminance: cd/m² SANS 1814:2002 SANS 60570:2003 SANS :2001 Excluding Clause: 7.11 VC 8055:2009 SANS :2011 SANS :2014 Excluding: Clauses Annex P; SANS :1979/ :1979 SANS :2013/ :2013 SANS :2013/ :2013 SANS :1997/ :1997 SANS :1998/ :1998 SANS :1994/ :1994 SANS :1982/ :1982 SANS :2013/ :2013 SANS :1987/ :1987 SANS :2003/ :2003 Original date of accreditation: 01 August 1998 Page 2 of 5

4 Luminaires safety and performance testing (continued) SANS :2013 SANS :1984/ :1984 SANS :1993/ :1993 SANS :1981/ :1981 Excluding Clause ; SANS :2011/ :2011 SANS :2001/ :2001 Excluding Clauses & ; SANS :2014/ SANS :1994/ :1994 Ballasts Electromagnetic ballasts, AC and DC supplied electronic ballasts Power: 0 3 kw Current: 0 20 A Voltage: 0 1 kv Temperature: C Endurance: hours SANS 890-1:2007 SANS 1266:2007 SANS 60921:2006 SANS 60923:2007 SANS :2013 SANS :2006 SANS :2014 SANS :2012 SANS :2000 SANS :2007 SANS :2013 Transformers, convertors, invertors Single phase transformers to 25 kva Poly phase transformers to 40 kva Convertors and invertors for lighting applications Capacitors Lighting and motor capacitors Starting devices Glow-starters, electronic starters, ignitors, PECU s Voltage: V Resistance: 0 20 k Temperature: C Endurance: hours Capacitance: 1 F 60 F Capacitor losses: 0 0,5 Voltage: V Endurance: h Dimensions: Go/No-go gauges Torsion: 0 0,6 N.m Impact test: 0 0,5 N.m Pulse measurements: 1 40 kv Voltage: V Photometry: lux Endurance: 0 72 hours SANS :2013 SANS :2013 SANS :2006 SANS :2010 SANS :2011 SANS :2009 SANS :2015 SANS 60155:2007 SANS :2004 SANS :2011 SANS :2011 SANS :2014 Original date of accreditation: 01 August 1998 Page 3 of 5

5 Lamp holders and starter holders Bayonet cap and Edison screw lamp holders, lamp holders for fluorescent lamps, starter holders. Dimensions: 0 50 mm; Go/No-go gauges Torsion: 0 2,0 N.m Current: 0 10 A Voltage: V Contact force: 0 20 N; Go/No-go gauges SANS 60238:2012 SANS 61184:2012 Symbolic safety signs Standard, radio luminescent, internally illuminated, retroreflective and luminescent signs. Safety glass for motor vehicles. Laminated and toughened safety glass Dimensions: mm Colour: D65, Illuminant A and x,y,z system Luminance: 0 0,5 cd/m² Coefficients of retro-reflection: cd/(lx.m²) Construction Torsion: 0,5 6,0 N.m Power: 0 3 kw Current: 0 10 A Voltage: V Temperature: C Endurance: hours Luminous transmittance: % Optical properties Impact tests Resistance to high temperature, ultra-violet radiation, humidity, firing. SANS :2011 SANS :2007 SANS :2013 SANS :2011 SANS :2006 SANS 1191:2013 SANS 1192:2011 SANS 1193:2008 Retro-reflective materials and devices Retro-reflectors, road studs, warning triangles, retroreflective material for road signs, contour marking, registration plates, chevrons. Retro-reflection: mcd/lx Colour :D65 Illuminant A and x, y, z system Abrasion Thermal shock Heat resistance SANS 513:2005 SANS :2008 SANS :2008 SANS :2008 SANS :2008 SANS :2004 SANS :2004 SANS :2007 SANS :2006 SANS :2014 SANS 1555:2014 SANS 1442:2008 SANS :2010 SANS :2007 SANS :2014 SANS z:2004 Original date of accreditation: 01 August 1998 Page 4 of 5

6 Lenses, glasses and mirrors Ophthalmic lenses, lenses for sunglasses, safety glasses and goggles, silvered glass mirrors and mirrors for motor vehicles. Luminous transmittance: % Luminous reflectance: % Spectral transmittance (190 nm to 3000 nm): % Lens power: 0,05 2,5 Optical properties SANS 787:2005 SANS 1150:2007 Clauses 3.4 & 3.9 SANS 1236:2005 SANS 1404:2002 SANS 1436:1994, Clause 2,4 SANS 1644:1995 Excluding Clause:3.1 SANS 1703:2003: Clause 5.9 Test methods / equipment: Spectrophotometric measurements Transmittance/reflectance ( nm): % Beckman: model UV5240 spectrophotometer Reflectance and transmittance Diffuse, direct, total: % Direct sphere method Retro-reflection mcd/lx CIE Publication No 54 Colour measurements Colour: D65, Illuminant A and x,y,z system CIE Publication No 15 Power electronics and EMC testing Power measurements V: V AC or DC I:0 100 A DC I: A AC V:0 650 V I :0 50 A NORMA D6100 power analyser SANS 61547:1995 Excluding Clauses: 5.4; 5.6; 5.8 NORMA D5255S power analyser Pulse measurements 0 40 kv HP scope with Tektronics probe P6015 Computer system with probe P6015 SANS :2006 Original date of accreditation: 01 August 1998 Page 5 of 5 ISSUED BY THE SOUTH AFRICAN NATIONAL ACCREDITATION SYSTEM