Avaya ACIS Avaya EXAM 6002 Avaya Aura Communication Manager and CM Messaging (R6.0) Implementation Exam

Transcription

1 Avaya ACIS 6002 Number: 6002 Passing Score: 660 Time Limit: 120 min File Version: Avaya EXAM 6002 Avaya Aura Communication Manager and CM Messaging (R6.0) Implementation Exam Total Questions: 70 There are still some wrong Answers in, don t know which, but it s enough for pass the exam...

2 Prüfung A QUESTION 1 When troubleshooting a system fault. If the web interface or SAT are unavailable. Which method should be used? A. SAI B. TTY2 C. CLI D. Modem Correct Answer: C /Reference: QUESTION 2 Which two servers support RAID 5 configuration for CM 6.0?(Choose two.) A. S8730 Server with 8 GB RAM B. S8800 Server with 12 GB RAM C. S8510 Server with 8 GB RAM D. S8300 Server with 8 GB RAM Correct Answer: BC /Reference: QUESTION 3 Hunt group number 99, with group extension 4199, is administered for messaging. Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99? A. show tracelog huntgroup 419 B. view logs realtime huntgroup 99 C. display realtime logs huntgroup 99 D. list trace hunt-group 4199 Correct Answer: D /Reference: QUESTION 4 A customer needs to set up SIP integration on Communication Manager Messaging Application 8.0 What are three pieces of information that are needed to meet this requirement?(choose three) A. Signaling Group number B. SIP domain C. Transport Method D. Extension Length E. Hunt Group number

3 Correct Answer: BCD /Reference: QUESTION 5 Which three are bests that can performed to verify a Communication Manager Messaging 6.0 application is working property? (Choose three) A. Verify the Hunt Group status B. Check the Messaging port status using the display port command C. Call the Messaging Hunt Group D. Check the Messaging port status using the status port command E. Check the Messaging CE /Reference: QUESTION 6 On a media gateway G450. which slots are permitted for the MM342? A. V1 and V2 B. V2 and V6 C. V3 and V8 D. V5 and V7 Correct Answer: C /Reference: QUESTION 7 A customer is planning to upgrade from CM 5.X to CM 6.0 on an existing S8510 server. What is the total minimum memory requirement for this upgrade? A. 4 GB RAM B. 8 GB RAM C. 12 GB RAM D. 16 GB RAM Correct Answer: B

4 /Reference: QUESTION 8 Which screen is used while upgrading the system platform fro m Release to Release ? A. Communication Manager Web interface B. Console domain ->Server Management->Patch Management C. Console domain->server Management->Platform Upgrade D. Console domain->virtual Machine Management Correct Answer: C /Reference: QUESTION 9 Which three statements about CM_Duplex template CM 6.0 ARE TRUE? (Choose three.) A. Software duplication is available. But hardware duplication is not available B. The S8510 Server is not used for duplication C. Server duplication is configured via "Failover" option on CDOM's web interface D. S8730 with DAL 2 card does not support server duplication in CM 6.0 E. The CM duplex template supports CMM BC /Reference: QUESTION 10 Which Gateway command resets the Gateway back to factory default? A. reset B. restart C. softboot D. nvram init Correct Answer: D /Reference: QUESTION 11 A technician wants to test and see if the voice channel between two IP phones is shuffled. Which command in Site Administration Terminal (SAT) can be used to determine the type of IP connection, and to check if the voice channel is shuffled? A. status station <extension> B. status shuffling <extension> C. list station <extension> D. test station <extension

5 /Reference: QUESTION 12 Which Ethernet port on S8800 server is used for server duplication? A. ETH0 B. ETH1 C. ETH2 D. ETH3 Correct Answer: D /Reference: QUESTION 13 Which three components are part of Avaya Aura CM_survRemote_Embed template? (Choose three) A. Utility Services B. CM 6.0 C. Session Manager 6.0 D. CMM 6.0 E. AES 6.0 BC /Reference: QUESTION 14 A technician is planning to upgrade an Avaya Communication Manager system to Release 6.0 from Release 5.2. Which two tasks must be performed during the upgrade procedure?(choose two) A. The S8700-series servers must be replaced by S8800 servers B. All G350 gateways must be replaced by G430 or G450 gateways C. The Survivable Remote servers must be upgraded to release 6.0 D. The Survivable Remote servers can stay at release 5.2 C /Reference: QUESTION 15 In the navigation pane, What are the steps to create a test mailbox on the Communication Manager Messaging 8.0 Application? A. Select Messaging Administration then Subscriber Management, and then Click Add or Edit B. Select Subscriber Administration, then Click net

6 C. Select Subscriber Administration, then Subscriber Management and then Chen Click Add D. D. Select Forms Control, and then at the command line run the Add Subscriber command /Reference: QUESTION 16 When configuring a G450 Media gateway, which two port settings must be set? (Choose two) A. FTP Server B. 100 MB port speed C. auto-negotiation enabled D. Full Duplex Correct Answer: BD /Reference: QUESTION 17 A switch administrator wants to busyout trunk 53 for maintenance and administration work However, there is one call active on port 5 of the trunk. Which command should be executed from the SAT terminal to find out IP addresses and ports of the near-end and far-end node of the audio connection? A. status trunk 53/5 B. list trace 53/5 C. display trunk statistics 53/5 D. status port 53/5 /Reference: QUESTION 18 Which three objects can be downloaded from the Product License Delivery System (PLDS)? (Choose three.) A. Authentication file B. Patches C. Firmware updates D. PuTTy E. Communication Manager Templates Correct Answer: BCE /Reference: Authentication file will be downloaded from RFA site. Unique authentication files are created by the Authentication File System (AFS), an online applictaion at

7 QUESTION 19 Which two statements describe the new procedures that a customers can use to directly and permanently turn ON or OFF licensed features in CM 6.0?(Choose two) A. Customers can turn features ON or OFF using the change system parameters customer-options command on the System Access Terminal (SAT) B. Customers can turn features ON or OFF using the System Management Interface Administration page C. Customers can access PLDS directly to turn features ON or OFF and then download and install a new license file with the updated features. D. Customers can turn features ON or OFF using the WebLM server on the System Platform Management Console Correct Answer: CD /Reference: QUESTION 20 Which statement describes the action to assure the CM_SurvRemoteEmbed Template was installed correctly? A. From a browser. Using the Communication Manager IP address, successfully log into the Communication Manager System Management Interface (SMI) B. From a browser logged into Communication Manager, select Administration->Server (Maintenance) - >Server-> Process Status, click on View and verify CommunicaMgr appears C. From a browser logged into the System Management Console verify cm, bsm and utility_server appear and the Application Status is running D. When monitoring the template installation workflow status, verify the message, "wizard completed successfully" displays Correct Answer: C /Reference: QUESTION 21 Which three statements about when Communication Manager Release 6.0 is deployed as a Feature Server are true? (Choose three) A. It supports G450/G430 gateways B. It supports Analog trunks C. It supports SIP telephones D. It supports SIP trunks E. It supports Digital trunks CD /Reference: QUESTION 22 When using the Avaya site Administrator GEDI interface. Which command would be used to check the configuration of a telephone set with the extension of 1000?

8 A. print station 1000 B. display station 1000 C. shhow station 1000 D. view station 1000 Correct Answer: B /Reference: QUESTION 23 Which three statements are true for a configuration that consists of duplicated S8800 main servers with a duplicated port network and a survivable core? (Choose three) A. Software duplication exists between the two main S8800 servers B. The two main servers have duplicated IPSIs C. Hardware duplication exists between the two main S8800 servers D. The two main servers share a single control network E. All CLAN and Medpro cards must be in one subnet BD /Reference: QUESTION 24 A technician has installed a pair of duplicated S8800 servers with IPSI duplication Which two procedures indicate that the duplicated IPSIs are both operational? (Choose two) A. The Enable Operation of IPSI Duplication field on the display system-parameter duplication form is set to y B. IPSI circuit packs have been installed in slots1 and 2 of carrier A and one of the IPSI LEDs is flashing C. Execution of the test ipserver-interface command for both IPSI circuit packs shows PASS in the results column D. A ping test executed from the server to the IPSIs and from the IPSIs to the servers returns success for the active IPSI and failure for the standby IPSI C /Reference: QUESTION 25 What are the recommended CLAN and MEDPRO port settings? A. 10Mbps half duplex B. 1000Mbps full duplex C. 100Mbps full duplex D. 100Mbps half duplex Correct Answer: C

9 /Reference: QUESTION 26 Which two statements are true regarding a media gateway fall back (recovery) to the main (primary) server? (Choose two) A. All active (stable) IP calls on the media gateway drop when the media gateway falls back from the survivable server is registered to the main server B. The list survivable-processor command can be used to confirm that the remote survivable server is registered to the main server and that the remote survivable server is no longer active C. When the main server recovers it issues registration requests to all to media gateways in the network D. Executing the status media-gateways command from the main server will show which media gateways are registered with the main server Correct Answer: BD /Reference: QUESTION 27 To confirm that a survivable server is currently registered to the main CM server, using the SAT, which command should be entered? A. status ess clusters B. display survivable-processors C. status ess port-networks D. status survivable-processors /Reference: Use the following commands to verify the survivable core server translations: list survivable-processor (executed on the main server) displays all translated survivable core servers. status ess clusters displays: - Which clusters are enabled - When translations were last updated - What software release the main server and survivable core servers are running The survivable core servers can be on a later release than the main server but the main server should never be on a later release than the survivable core servers. The software release should only be different when upgrades are being performed. Always upgrade the survivable core servers first and then the main server. The status ess port-networks command displays which Cluster ID is controlling each port network and which survivable core server the port networks (IPSIs) have on their priority lists. QUESTION 28 A customer wants to enable audio encryption for IP phone calls, but the option is not available on any ipcodec-set. Which procedure must be followed to obtain this feature? A. From the SAT, type change system-parameters customer-options. Find the Media Encryption over IP field, and set the option to Y. Save the change B. From the SMI Feature Administration page, find the Media Encryption over IP field set the option to Y. Save the change C. From the System Platform WetLM page, page, find the Media Encryption over IP field set the option to

10 Y. Save the change D. From the Aura System Manager's Feature Server Administration page, find the Media Encryption over IP field, and set the option to Y. Save the change /Reference: QUESTION 29 Which statement describes the action to assure the system platform was installed correctly? A. From a laptop connected to the network, ping the dom0 IP address and verify a successful response B. Immediately after the installation, verify the DVD is ejected from the drive and that the server reboots C. After connecting to the server using PuTTY and logging in as root, verify there are no errors when running the xm list command D. From the System Management Console browser, verify Domain-0 and cdom are running Correct Answer: C /Reference: QUESTION 30 Which statement is true about duplex servers in CM 6.0? A. The Survivable Remote Duplex template includes Branch Session Manager B. CM uses the high availability feature that System Platform can now provide C. The license file for a survivable server is different than the license file of the main server D. The main and all survivable server require an authentication file Correct Answer: D /Reference: CM will not use System Platform's HA capability for CM Duplex configuration, but will instead use its own software duplication feature (application level) QUESTION 31 System Platform webconsole is used to apply the service pack for which three virtual machines? (Choose three) A. System Platform B. AES 6.0 C. Utility Server D. Communication Manager 6.0 E. CMM 6.0 CD /Reference:

11 QUESTION 32 Which procedure must be followed while migrating from CM (S8800 Server with 2 HDD) to CM 6.0? A. Insert 3rd hard drive, run Raid CD, and then take backup B. Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after rebooting C. Insert the Raid CD, reboot the server, and then take backup D. Insert the hard drive and the 3rd hard drive is incorporated automatically Correct Answer: B /Reference: QUESTION 33 Which Communication Manager 6.0 command is used to add a new survivable cone server so that it would register with the Main server? A. add survivable-processor B. add survivable-processor core C. add survivable-processor core D. add survivable-processor <node-name> Correct Answer: D /Reference: QUESTION 34 Which Ethernet port on S8800 server is connected to the customer network? A. ETH0 B. ETH1 C. ETH2 D. ETH3 /Reference: QUESTION 35 When using the Avaya Site Administrator GEDI interface, which command would be used to build a new telephone set with the extension of 1000? A. new station 1000 B. add station 1000 C. build station 1000 D. add set 1000 Correct Answer: B

12 /Reference: QUESTION 36 Which two components are part of the Avaya Aura CM_Simplex template? (Choose two) A. Utility Services B. CM 6.0 C. Session Manager 6.0 D. Avaya Enablement Services (AES) B /Reference: QUESTION 37 When using the Avaya Site Administrator GEDI interface, which command would be used to confirm that Media Gateway number 3 is registered? A. show media-gateway 3 B. display media-gateway 3 C. print media-gateway 3 D. view media-gateway 3 Correct Answer: B /Reference: QUESTION 38 For Avaya Aura CM6.0 how is the License file installed on the server? A. by accessing the Web interface of CM B. using the loadlicense command through shell prompt of CM C. through the Web interface of MOM0 D. using the Web Interface of Console Domain Correct Answer: D /Reference: QUESTION 39 Concerning the type of Integration with Communication Manager, on the Navigation Pane, where is the Communication Manager Messaging 6.0 Application mentioned or configured? A. Click the System wide Messaging Parameters, then Switch Integration Type field B. Click Switch Link Administration, then Switch Type C. Click Integration Type D. Click Switch Link Administration, then Switch Link Admin, and then Switch Integration Type field Correct Answer: D

13 /Reference: QUESTION 40 A small enterprise customer needs 445 SIP/H.323 users. Which CM6.0 template will be the most economical solution? A. CM_Simplex B. CM_survRemote_Embed C. CM_Duplex D. CM_onlyEmbed Correct Answer: D /Reference: QUESTION 41 For duplex S8800 servers running CM6.0 by default which Ethernet port communicates with IPSIs? A. Eth0 B. Eth1 C. Eth2 D. Eth3 /Reference: QUESTION 42 When configuring a G450 Media gateway using the gateway CLI interface, which command would be used to view the serial number and software status? A. show serial number B. show system C. print G450 D. show G450 Correct Answer: B /Reference: QUESTION 43 Which three elements are needed to add a CLAN IP interface? (Choose three) A. network region B. gateway node name C. node name

14 D. duplicate node name E. link CE /Reference: QUESTION 44 Which three procedures are used to determine whether a gateway with a survivable remote server has lost its H.248 link (connection) to the main (primary) server? (Choose three) A. Execute the Communication Manager command display alarms, to see whether the Link Loss Delay timer has expired B. Execute the Communication Manager command display alarms, to see whether the No Service Timeout Timer (NSTT) has expired C. Execute the SAT command List media-gateway from the remote survivable server, to determine whether the media gateway is registered with a survivable server D. Execute the SAT command status media-gateways, to determine which media gateways are not registered to the main server E. Execute the command status H.248 line from the remote gateway, to determine whether the link to the main server is active Correct Answer: CDE /Reference: QUESTION 45 A user at extension 1111 complains that when dialing extension 2222 the call is xxxxxxxx made are connected as expected, There is not a display on the phone While at the xxxxxx. Which command identifies the reason this phone call is behaving in this unexpected xxxxxxxxx? A. list trace station 1111 B. list trace station 3333 C. status station 1111 D. display station 3333 /Reference: QUESTION 46 A user at a remote branch location is registered to a G450 media gateway connected via Processor Ethernet (PE) to a main Communication Manager in the core. They report that they are no longer able to place calls to users at the core. Which three procedures can be used to diagnose the source of the

15 problem? (Choose three) A. Confirm that the Registered field on the Communication Manager display media-gateway form is set to y. B. Confirm that the PE interface is active by executing the Communication Manager display processor- Ethernet command and confirm that the Allow H. 248 Gateway field is set to y. C. Use the show mgc command on the media gateway to confirm that the IP address of the PE enabled server at the core is administered as the primary controller of the media gateway D. Use the list registered-ip-stations command on the Communication Manager to determine whether the user on the media gateway is registered E. Use the list survivable processor command to confirm that the survivable server is registered to the main Communication Manager in the core BC /Reference: QUESTION 47 How is the status of virtual machines (eg.dom-0, CDOM-0, CM6.0) on S8800 server checked? A. by going to the home page of Console Domain B. by going to the home page of Avaya Communication Manager C. by going to the home page of Dom 0 D. by using link on Internet Explorer-> /Reference: QUESTION 48 Which Circuit Pack provides an IP Server Interface in an Avaya G650 Gateway? A. TN2312AP B. TN2342AC C. MM711 D. MM714 /Reference: QUESTION 49 A technician is asked to retrieve a maintenance log for CMM that shows the information from 8:00 AM to 5:00 PM local time that day. Which shell command should be executed to retrieve the maintenance log? A. show maint log B. displog -l maint -d 10/10/10 08:00 C. display log for maint D. print -1 maint -d 08:00 10/10/10

16 Correct Answer: B /Reference: QUESTION 50 Which MAC address is recommended for the license file? A. the MAC Address of the Console domain B. the MAC Address of the CM eth0 port C. the MAC Address of the CM host name D. the MAC Address of the DOM0 Correct Answer: B /Reference: QUESTION 51 A newly installed main CM 6.0 server indicates it is in license error mode. A technician checks again 45minutes later and it is still in error mode. The license was installed from the System Management Interface. (SMI) Which statement describes the reason for the error mode? A. The installer used the wrong interface to install the license and it is therefore not installed. B. The server cannot communicate with the IPSI or Media Gateway whose serial number was used in the license file. C. The license audit runs every 60 minutes and the error will be resolved in 15 minutes. D. The installer loaded a license for one of the survivable servers, not the main server, and the IPSIs, Media Gateways, and/or IP phones have registered to it /Reference: CM license file installed and managed on WebLM server in System Platform Managment Console No license files necessary for Survivable Core (formerly ESS) and Survivable Remote (formerly LSP) servers QUESTION 52 To backup Communication Manager, what two choices does the customer have?(choose two) A. Backup/Restore B. Backup Now C. Backup Later D. Schedule Backup E. Backup/Restore Later Correct Answer: BD /Reference: QUESTION 53

17 A user at extension 1111 complains that when dialing extension 2222, the call is unexpectedly answered by the person at extension All other calls made are connected as expected. There is not a display on the phone. While at the SAT, the technician has the user repeat the call to extension Which command shows the reason this phone call is behaving in this unexpected way? A. list trace station 1111 B. list trace station 3333 C. status station 1111 D. display station 3333 /Reference: QUESTION 54 Which greeting should be received when you are calling the Messaging hunt group? A. Welcome to Audix. B. Welcome to messaging. C. Your call is being answered by Audix. D. Please leave a message after the tone. /Reference: QUESTION 55 What two pieces of information does the Product Licensing and Delivery System (PLDS) require to be entered for a license file to be generated?( Choose two) A. serial number B. license activation code C. MAC address D. platform type Correct Answer: BC /Reference: QUESTION 56 Which statement describes the action to assure the CM_Simplex Template was installed correctly? A. From a browser logged into the System Management Console, verify cm and utility_ server appear and the Application State is running. B. From a browser, using the Communication Manager IP address, successfully log into the Communication Manager System Management Interface (SM) C. When monitoring the template installation workflow status, verify the message. "Wizard completed successfully" displays. D. From a browser logged into Communication Manager, select Administration Server (Maintenance ) Server Process Status, click on View, and verify CommunicaMgr appears

18 /Reference: QUESTION 57 Which two statements regarding shuffling and hairpinning are true?(choose two) A. Hairpinning does not use media processor resources. B. The Audio Connection Type field on the Communication Manager status station form can be used to determine whether a call is shuffled C. A call between a DCP endpoint and an H 323 endpoint can be shuffled D. Shuffling releases media processor resources Correct Answer: BD /Reference: QUESTION 58 Which Avaya G450 Module provides 8 DCP ports? A. MM711 B. MM712 C. TN7202 D. TN2224 Correct Answer: B /Reference: QUESTION 59 A network failure prevents communication between all the port networks (IPSIs) and their main CM server. What is the maximum number of port networks (IPSIs) that can register to a survivable remote embedded server? A. no port network B. 63 port networks C. 64 port networks D. 126 port networks /Reference: QUESTION 60 Which three servers can be upgraded to Communication Manager Release 6.0? (Choose three.) A. S8300C B. S8300D

19 C. S8400 D. S8510 E. S8800 Correct Answer: BDE /Reference: QUESTION 61 A customer has a Communication Manager R6.0 system with IP phones and older TDM phones, and says there is no dial tone for all of the IP Phones. All of the hardware has been verified to be working property. Which two steps can be taken to identify the cause of the problem? (Choose two) A. Verity that the TN2602 Media Resource circuit pack has the correct IP settings B. Verify that the Processor Ethernet mode is enabled in the server C. Set a static IP address on a laptop and see if the server can be pinged D. Set a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged D /Reference: QUESTION 62 To ensure that Communication Manager Messaging application is working. What are three tests that can be performed? (Choose three) A. Call one of the two station that you set as a subscriber to the messaging server, and let the call go to coverage. B. Leave a message on a covered call and verify that the Message Waiting Indicator (MVVI) lamp on the receiving extension is lit C. Call the station and after the call is answered leave a message. D. Call the messaging hunt group from any of the stations to ensure it is answering E. Log into Communication Manager Messaging to verify CDOM is running BD /Reference: QUESTION 63 Which statement describes how the Communication Messaging Application is enabled the first time after the installation? A. Connect to the SAT terminal Login using craft and then enable messaging using the enable messaging command B. Open the Communication Manager IP address using web browser. Login as craft, click installation, then Communication Manager Messaging and then click Enable C. Open the Communication Manager IP address using web browser. Login as craft, click Administration, then Server(Maintenance). Then click Miscellaneous, then Messaging Software, and then click Enable. D. Communication Manager Messaging is enabled by default after the installation. Correct Answer: D

20 /Reference: QUESTION 64 Through which two protocols can integration of the Communication Manager Messaging application 6.0 with Communication Manager occur? (Choose two.) A. H323/QSig protocol B. RTP protocol C. SSP protocol D. SIP protocol D /Reference: QUESTION 65 An administrator has just installed a 9620 IP phone on an existing system. The command change ipnetwork-map is used to administer the phone into network region 100. All other phones are in network region 1. Like all other 9620 phones on this system, this one successfully gets IP address information from the one DHCP server. However, the new phone fails to register with CM. Which two statements describe the cause of this problem? ( Choose two) A. Neither PROCR nor CLANs were administered in network region 100 B. There are no Medpros or H248 Media Gateways administered in network region 100 C. Network region 100 is not configured to communicate with any other network regions D. On the ip-interface form, someone recently set the field Allow H323 registrations to "n" C /Reference: QUESTION 66 Which statement describes how the licensed mailboxes are enable on Communication Manager Messaging Application 6.0? A. Mailboxes are enable in the Communication Manager 6.0 license file B. Mailboxes are enable by a separate license that needs to be generated and deployed. C. Mailboxes are enabled by default D. Mailboxes are enabled in the system-parameters features form Correct Answer: B /Reference: QUESTION 67 On a media gateway G450, into which slot does the S8300D server blade need to be inserted?

21 A. V1 B. V2 C. V4 D. V8 /Reference: QUESTION 68 Which two hardware components support CM_ survremote template?( Choose two) A. S8730 Server with 8 GB RAM B. S8800 Server C. S8510 Server with 8 GB RAM D. S8300D Server Correct Answer: BC /Reference: QUESTION 69 In which two modes is Communication Manager Release 6.0 deployed? (Choose two.) A. Feature Server B. Signaling Server C. Evolution Server D. System Manager Server C /Reference: QUESTION 70 A customer ha selected Avaya Aura CM_survremote_embedded template. Wich Avaya server should be used? A. S8730 Server 8 GB RAM B. S8800 Server C. S8510 Server with 8 GB RAM D. S8300D Server

22 Correct Answer: D /Reference: