TAIYO YUDEN Component Library for ANSYS Electronics Desktop Circuit Simulator. - Installation manual -

Transcription

1 TAIYO YUDEN Component Library for ANSYS Electronics Desktop Circuit Simulator - Installation manual -

2 Contents * How to install Taiyo Yuden Component Library (common for Nexxim and Ansoft Designer) * How to configure Library on Nexxim * How to use Library on Nexxim * How to configure Library on ANSYS Designer (former circuit engine) * How to use Library on ANSYS Designer (former circuit engine)

3 How to install TAIYO YUDEN Component Library (common for Nexxim and ANSYS Designer)

4 How to install TAIYO YUDEN Component Library Step1. Unzip AS_TY**.zip Step2. Copy the unzipped files into the directory where Ansoft Designer is installed (<ANSYS Designer>). (for both Nexxim and ANSYS Designer) * Delete the folder <ANSYS Designer> userlib Taiyo Yuden if it already exists, before installing current version of the Library. * In case that you use ANSYS 15.0 or 16.0, copy Taiyo Yuden folder to <ANSYS Designer> Designer userlib (ANSYS 15.0) <ANSYS Designer> ElectronicsDesktop userlib (ANSYS 16.0) In case that you use ANSYS 19.0, copy Bitmaps folder to <ANSYS Designer> Win64 syslib <Unzipped folder> ** <ANSYS Designer> folder Copy the whole folder

5 How to configure Library on Nexxim

6 How to configure Library on Nexxim Step 1 After launching ANSYS Designer, 1. Right-click on the project name (e.g. Project1) in the Project Manager. Select Insert > Insert Nexxim Circuit Design Then a schematic window will open.

7 How to configure TAIYO YUDEN Library on Nexxim Step 4 Step 2 Step 3 Step 5 Step 7 2. Select Tools > Configure Libraries from the tool bar. Then Configure Design Library dialogue box will open. 3. Select the button User Libraries and confirm that there is Taiyo_Yuden in Available Libraries box. 4. Select Components. 5. Select Taiyo_Yuden folder and move it to Configured Libraries using >> button. 6. Repeat Step 4 and 5 for Symbols and Footprints as well. 7. Tick Save as default and press OK.

8 How to configure TAIYO YUDEN Library on Nexxim Step 9 8. Reboot ANSYS Designer. Do the following procedure with schematic window open. 9. Click the component tab, then select User Libraries -> Taiyo Yuden -> SMT Global Control and put it on the schematic. 10. Double click the SMT Global Control to open the property window. 11. Uncheck Show Hidden checkbox and click OK button. That s all for the library configuration. Step 10 Step 11

9 How to use Library on Nexxim

10 How to use Library on Nexxim - Selecting a component group Step 2 Step 1 To select a component group in the Library, 1. Select Components tab of Project Manager. 2. Open Taiyo_Yuden folder in User Libraries and select a component group.

11 How to use Library on Nexxim - Selecting a component Double-click on the symbol You can choose S-parameter or Equivalent model as a simulation model for each element. Click on Choose Model button Use Choose Model button to select a component of TAIYO YUDEN Library. You can select an appropriate one from the data provided for a design as well as the model name.

12 How to use Library on Nexxim - Placing SMT Global Control (only on Nexxim) 1. For an analysis on Nexxim, be sure to put on the schematic a [SMT Global Control] in Taiyo_Yuden. 2. For a transient analysis, tick [Transient_Analysis] in the property of [SMT Global Control]. Then set [Transient_Frequency] value to the fundamental frequency of the signal to be analyzed.

13 How to use TAIYO YUDEN Library on Nexxim - Displaying layout and simulation results Layout of a TAIYO YUDEN Library component and microstrip lines in a Layout window simulation results

14 How to configure Library on ANSYS Designer (former circuit engine, version 3.5.x or prior)

15 How to configure Library on ANSYS Designer Step 1 After launching ANSYS Designer, 1. Right-click on the project name (e.g. Project1) in the Project Manager. Select Insert > Insert Circuit Design Then a schematic window will open.

16 How to configure Library on ANSYS Designer Step 4 Step 2 Step 3 Step 5 Step 7 2. Select Tools > Configure Libraries from the tool bar. Then Configure Design Library dialogue box will open. 3. Select the button User Libraries and confirm that there is Taiyo_Yuden in Available Libraries box. 4. Select Components. 5. Select Taiyo_Yuden folder and move it to Configured Libraries using >> button. 6. Repeat Step 4 and 5 for Symbols and Footprints as well. 7. Tick Save as default and press OK.

17 How to use Library on ANSYS Designer (former circuit engine, version 3.5 or prior)

18 How to use Library on ANSYS Designer - Selecting a component group Step 2 Step 1 To select a component group in the Library, 1. Select Components tab of Project Manager. 2. Open Taiyo_Yuden folder in User Libraries and select a component group.

19 How to use Library on ANSYS Designer - Selecting a component Double-click on the symbol You can choose S-parameter or Equivalent model as a simulation model for each element. Click on Choose Model button Use Choose Model button to select a component in TAIYO YUDEN Library. You can select an appropriate one from the data provided for a design as well as the model name.

20 How to use Library on ANSYS Designer - Displaying layout and simulation results Displaying simulation results Analysis settings Layout of a TAIYO YUDEN Library component and microstrip lines in a Layout window