Seamless. Hydrocarbon Processing Industry. Power Generation

Transcription

1 Seamless Hydrocarbon Processing Industry Power Generation

2 About Us Hydrocarbon Processing Industry (HPI) We cover the full range of steel grades for the Hydrocarbon Processing Industry, from carbon steel to 9r alloys. Typically used in extreme temperatures or in corrosive or highpressure environments, our products can be found in refineries, gas processing plants and petrochemical plants. View our production programme at tubulareurope.arcelormittal.com 2 Dimensional Range Power Generation Whether coal or gas fuelled, biomass or waste to energy, our seamless pipes are widely used in installations at the very heart of thermal power plants. Our variety of boiler tube grades ranges from carbon steel, for less demanding environments, to ferritic steel (P91), for areas where elevated temperature & high pressure are constant. Mill OD mm WT mm Max Lengths m Ostrava ,5 Roman ,8 OD/WT mm 2,3 2, 2,9 3,2 3,,5 5 5,,3,1 8 8, , 1,2 1 1,5 22, ,0 30,0 32,0 3,0 0,0 5,0 50,0 mm inch 0,09 0,10 0,11 0,13 0,1 0,1 0,18 0, 0,22 0,28 0,31 0,35 0,39 3 0,50 0,5 0,3 0,9 0,9 0,8 0,98 1,1 1,2 1,3 1, 1,5 1, 1,9 21,3 0,8 25 0,98 2,9 1,0 31,8 1,25 33, 1, , ,50 2, 1,,5 1,5 8,3 1, ,01 5 2,13 5 2,2 0,3 2,3 3,5 2,50 0 2, 3 2,8,1 3,00 82,5 3,25 88,9 3,50 101,,00 108,25 11,3, , ,2 139, 5,50 11,3 5,5 152,,00 159,2 18,3,3 1,8,00 193,,3 219,1 8,3 2,5 9, ,5 298,5 11 3/ 323,9 12 3/ 30,0 13 2/5 355, 1 35,0 1 3/8 38,0 1 1/2 3,0 1 5/ 0, 1 19,0 1 1/2 2,0 1 /9 30,0 1 5,2 18,0 18 1/ 3,0 18 5/8 508,0 T1 T2 3

3 European Standard Standard lassification EN10211 Nonalloy steel tubes with specified room temperature properties P195 TR1&TR2 / P235 TR1 & TR2 / P25 TR1&TR2 Grade Mn Si P S r Ni u Al V Mo Ti Nb Other P195TR1 0,130 0,0 0,350 0,0 0,3 0,30 0,3 0,02 0,08 0,0 0,01 (r+u+mo+ni) = 0.0 P195TR2 0,130 0,0 0,350 0,015 0,3 0,30 0,3 0,02 0,02 0,08 0,0 0,01 (r+u+mo+ni) = 0.0 P235TR1 0,10 1, 0,350 0,0 0,3 0,30 0,3 0,02 0,08 0,0 0,01 (r+u+mo+ni) = 0.0 P235TR2 0,10 1, 0,350 0,015 0,3 0,30 0,3 0,02 0,02 0,08 0,0 0,01 (r+u+mo+ni) = 0.0 P25TR1 0,0 1,0 00 0,0 0,3 0,30 0,3 0,02 0,08 0,0 0,01 (r+u+mo+ni) = 0.0 P25TR2 0,0 1,0 00 0,015 0,3 0,30 0,3 0,02 0,02 0,08 0,0 0,01 (r+u+mo+ni) = 0.0 Standard lassification EN10212 ReH (YSup) [MPa] Eation (A) Rm (TS ) t [mm] % t 1 1 < t 0 0 < t 50 [MPa] () P195TR1/TR (25) P235TR1/TR (23) P25TR1/TR (19) Alloy and Nonalloy steel tubes with specified eleveated temperature properties P195GH T1 & T2 / P235GH T1 & T2 / P25GH T1 & T2 1Mo3 / 10rMo55 / 13rMo5 / 10rMo910 / X11rMo5 / X11rMo91 / X10rMoVNb91 Grade Mn Si P S r Ni u Al V Mo Ti Nb N Other P195GH 0,130 0, 0,350 0,010 0,3 0,30 0,3 0,02 0,02 0,08 0,0 0,01 (r+u+mo+ni) = 0.0 P235GH 0,10 1,2 0,350 0,010 0,3 0,30 0,3 0,02 0,02 0,08 0,0 0,02 (r+u+mo+ni) = 0.0 P25GH 0,0 1, 00 0,010 0,3 0,30 0,3 0,02 0,02 0,08 0,0 0,02 (r+u+mo+ni) = 0.0 1Mo ,350 0,010 0,3 0,30 0, rMo , ,30 0, rMo ,350 0, ,30 0, rMo ,500 0,02 0, ,30 0, X10rMo , , X11rMo , , X10rMoVNb ,02 0, , , ReH (YSup) [MPa] Eation (A) Rm (TS) t [mm] % t 1 1 < t 0 0 < t 50 [MPa] () P195GH (25) P235GH (23) P25GH (21) Mo () rMo () rMo () rMo () 0 2 X11rMo5+I () 0 2 X11rMo5+NT (18) 0 2 X11rMo5+NT (1) 0 2 X11rMo91+I (18) 0 2 X11rMo91+NT (1) 0 2 X10rMoVNb (1) Zr = 0.01 Standard lassification ategory EN10213 Alloy fine grain steel tubes P25NL1 / P25NL2 / P355NH / P355NL1 / P355NL2 T1 & T2 Grade Mn Si P S r Ni u Al V Mo Ti Nb Nb+V+Ti N Other P25NL1 0, ,008 0,300 0,50 0,300 0,0 0,05 0,08 0,00 0,05 0,05 0,0 Al:N =. 2 P25NL2 0, ,005 0,300 0,50 0,300 0,0 0,05 0,08 0,00 0,05 0,05 0,0 Al:N =. 2 P355N 0, ,50 0,0 0,300 0,50 0,300 0,0 0,10 0,08 0,00 0,05 0,12 0,0 Al:N =. 2 P355NH 0, ,50 0,010 0,300 0,50 0,300 0,0 0,10 0,08 0,00 0,05 0,12 0,0 Al:N =. 2 P355NL1 0, ,50 0,008 0,300 0,50 0,300 0,0 0,10 0,08 0,00 0,05 0,12 0,0 Al:N =. 2 P355NL2 0, ,50 0,005 0,300 0,50 0,300 0,0 0,10 0,08 0,00 0,05 0,12 0,0 Al:N =. 2 Standard lassification ategory EN1021 Nonalloy and alloy steel tubes with specified low temperature properties P215NL / P25NL T1 & T2 ReH (YSup) [MPa] t [mm] Rm (TS) [MPa] Eation (A) % t < t < t 0 0 < t 50 t < t 0 0 < t 50 () P25 NL1/NL (22) P355 N/NH/NL1/NL () P355N P355NH P25NL P355NL P25NL P355NL Grade Mn Si P S r Ni u Al V Mo Ti Nb P215NL ,35 0,010 0,30 0,30 0,30 0,0 0,02 0,08 0,0 0,01 P25NL 0, ,010 0,30 0,30 0,30 0,0 0,02 0,08 0,0 0,01 ReH (YSup) [Mpa] Rm (TS) Eation (A) % () P215NL (23) P25NL (22) 0 0 P215NL P25NL

4 ASTM/ASME Standards General onditions Standard lassification A / SA 333 Seamless and Welded Steel Pipe for LowTemperature Service Dimensional tolerances as per relevant standards A / SA 10 Seamless arbon Steel Pipe for HighTemperature Service B/ A / SA 335 Seamless Ferritic AlloySteel Pipe for HighTemperature Service P11 / P12 / P22 / P5 / P9 / P91 Stricter requirements on enquiry, subject to availability. Grade Mn Si P S r Ni u Al V Mo Nb N Other Gr. 0, B 0, ,1 0,08 r+u+mo+ni+v 1% 0, ,1 0,08 r+u+mo+ni+v 1% P P , P , P P P ,02 0, , AR (as rolled), +N (normalized), N+T (normalized+tempered) Q (quenched), Q+T (quenched and tempered). Testing & Inspection ertification to EN 10 with 2.1, 2.2, 3.1 or 3.2 as per customer requirement. All the standard testing: tensile, bend, flattening, hardness, hardenability, impact testing (+ to 50 ), cast & product analysis, leak tightness test, and as well as NDT such as Eddy urrent, Flux Leakage, MPI & Ultrasonic testing Material onditions Grade TS YS [Mpa] B P11 P12 P22 P9 P5 P A/SA 333 Gr. Eation in 50 mm, % A/SA 333 Gr. Delivery ondition Specimen size [mm] Min average 3 specimens Min per specimen 10 x x Ends square cut or bevelled according to API 5L, ASME B13.25, DIN 2559, ASTM A10 para Protection caps where required x Pipe lengths cut to specific tolerances (upon request). 2 t x 5 9 t x 3.33 Pipes for utilities available with grooved ends (Victaulic G103 specification) or threaded and socketed according to EN x t [mm] t t t. 2 t 5. t.8 t 2. Surface preparation: Black, Hot Dip Galvanized (EN 10A.1) or olour oated. Marking & Packing Marking can be done by paint or low stress stamping as per standard or at the client s request. Pipes bundled or loose depending on size, with aluium tags for durability. Qualifications & ertifications According to Industry Directives: PD, PED & IBR We are certified by TÜV NORD EN ISO 9001 & 1001, TÜV NORD BS OHSAS 18001, TUV E 008, AD 00 W0 / W/ W10, Bureau Veritas, Lloyd s Register & DNV. UL certification for fire proofing.

5 opyright Pictures Shutterstock All rights reserved all countries. The present publication shall not be reproduced, fully or in part, in any form or by any means whatsoever, without prior express written authorization from ArcelorMittal. are has been taken to ensure that the information in this publication is accurate, but this information is not contractually binding. Therefore, neither ArcelorMittal nor any other ArcelorMittal Group company accepts liability for errors or omissions or any information that is found to be misleading. As this document may be subject to change at any time, please consult the latest information at corporate.arcelormittal.com ArcelorMittal 22 boulevard d Avranches L110 Luxembourg G. D. of Luxembourg T F tubulareurope.arcelormittal.com