What s new in version 1.4. INSTALATION AND OPERATION MANUAL ABYSSAL OS Overlay Module Version 1.4

Transcription

1 What s new in version 1.4 INSTALATION AND OPERATION MANUAL ABYSSAL OS Overlay Module Version 1.4 1

2 What s new in version 1.4 Thank you for purchasing the Abyssal OS Overlay Module for your ROV. This instruction manual contains all the information you ll need for installing and operating the Overlay Module of the Abyssal OS. This system includes a processing computer to receive telemetry and video, process it, and output up to 4 HD video feeds with overlay. An installation USB Pen is also included, which contains the Supervisor Application to be installed on an external PC connected to the same network. There is already a Supervisor application installed on the processing unit, which can be used instead of an external computer. Please check the support page on our web site at for the latest software versions. We are continuously working on new features and improvements. Feel free to send your feedback to support@abyssal.eu so we can build a system that fits your needs. Manuel Parente CTO Abyssal S.A. 2

3 What s new in version 1.4 Contents 1 What s new in version Getting Started 5 Introducing Abyssal OS 5 Introducing the Overlay Module for Abyssal OS 6 Hardware Overview 7 Software Overview 8 3 Setup Instructions 9 Setting up the Hardware 9 Installing and running the software 14 4 Using the Abyssal OS Overlay Module Software 15 The Overlay Application 15 The supervisor application 16 3

4 What s new in version 1.4 What s new in version 1.4 Added a new module: Mission report, which allows generating a portable HTML5 report to be opened on a web browser; Added support for automatic on deck and off deck tags, which set the launch and recovery timestamps of a dive. Added a job number field to missions. Added vessel/installation information to the dive logs. 4

5 Getting Started Getting Started Introducing Abyssal OS Abyssal Operating System for ROVs is the indispensable tool to operate in the harshest environments with the world s most advanced 3d technology, augmented reality, and precise navigation. The Abyssal OS is a suite of tools for everyone involved in subsea operations. It allows asset tracking, life-of-field management, mission planning, and much more. It is especially useful for Subsea Construction, Decommissioning, Renewable Energy operations, seabed trenching and well Intervention. A new era of offshore Oil & Gas operations is starting. The increasing complexity of subsea oil fields requires the most innovative solutions. With the Abyssal Operating System installed on your Remotely Operated Vehicles you will be able to have an instant overview of the operation in real time. Using the Augmented Reality System with each of the ROV cameras, the pilot will be able to locate targets with incredible efficiency. It s the perfect tool for supervisors, superintendents and managers. Organize work sites, keep track of every mission, and manage all the data from the mission in real time. Monitor multiple assets with live positioning data. Manage multi-rov operations with safety and efficiency. 5

6 Getting Started Introducing the Overlay Module for Abyssal OS The Overlay Module for the Abyssal OS is a software and hardware solution that provides an overlay system for a mission's real-time video feed, with the current telemetry superimposed. It offers an easy-to-use, configurable, real-time display of telemetry in different visual formats (textual or graphic), compatible with all the different video formats. Abyssal Overlay System is a module already prepared to be used as an interface with Abyssal OS, the most advanced Visualization System for ROVs currently in the market. 6

7 Getting Started Hardware Overview The Abyssal OS Overlay package contains: 1 4U Rack PC 3 DVI to HDMI cables 1 HDMI to HDMI cable 3 Display Port to DVI cable 4 BNC to Mini BNC cables 1 Power Cable 1 User Manual 1 Installation USB Pen with Supervisor App for external PCs 1 HD Video Recorder to SSD Rack PC HyperDeck Disk Recorder 7

8 Getting Started Software Overview The software consists of 2 different applications: an overlay application and a supervisor application. The overlay application has no direct user interaction, and serves to render video with overlay graphics in a monitor. The supervisor application is the controller application, in which all interactions are made. The overlay applications run without the need for running the supervisor application. The supervisor application is used to monitor and configure the overlays, and can run on the overlay PC or on an external computer connected to the same network. In the supervisor application you can: Manage worksites Manage missions (jobs) for each worksite Manage logs for each dive in a mission Configure overlays Manage telemetry inputs Manage the overlays for each video output Adjust system units (feet, meters) See system health (alarms) Take and review snapshots of Overlay s monitors 8

9 Setup Instructions Setup Instructions Setting up the Hardware 9

10 Setup Instructions 1. Power Leave the power-cut button off while setting up the hardware. Turn it on when finished. Connect the power cable to the power connection. 2. Network Connect your Ethernet cable (RJ45) to the RJ45 jack. 3. Outputs Use a DVI to HDMI cable to connect the DVI output port to one of the monitors. Connect the HDMI end to the monitor and the DVI end to the Abyssal OS system. Use an HDMI to HDMI cable to connect the HDMI output port to a second monitor. To connect the last two monitors, link together a Display Port to DVI adapter and a DVI to HDMI cable. Connect the Display Port end to the Abyssal OS system and the HDMI end to the monitor. 10

11 Setup Instructions 4. Inputs Connect each of the 4 BNC cables to your video sources, and the mini-bnc terminator to the desired video input port in the Abyssal system. SD Format Support 625/25 PAL, 525/29.97 NTSC. HD Format Support 720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080i50, 1080i59.94 and 1080i60. SDI Compliance SMPTE 259M, SMPTE 292M, SMPTE 296M. 5. Telemetry If the telemetry source to be used is a serial cable, connect it to a USB port using the supplied adapters. For using telemetry via Ethernet (JSON), simply setup the network (see Network above). 11

12 Setup Instructions 6. Video Recorder When a Recorder is available, one video input (HD Video plus overlay) can be recorded to an SSD disk. To record, one of the HDMI output ports of the system must be connected to the HyperDeck Recorder; this output should be a duplicate of another monitor, this reduces the number of applications to 3. On the recorder, the Monitor Out must be connected to Video Input Port 4. 12

13 Setup Instructions The Recorder can be controlled through the network. This requires the Recorder s IP: by default the app will try to connect to ; if this is not the case, please change the settings configuration on C:\AbyssalOS\Settings\settings.cfg: <SettingsData>... <VideoRecorder> <Ip> </Ip> 13

14 Setup Instructions Installing and running the software When powering up the system, the overlay applications start automatically on the connected monitors. You can use the supervisor application to make changes to any of the monitors by focusing (with a mouse click) the overlay application you want to close, pressing ALT+F4 (to close the application), and opening the supervisor application by double-clicking on the desired icon. The icon s numbering corresponds to the monitor number in which you want to open the application. There is one shortcut on the desktop of each monitor. You can also keep the 4 applications running and use the installer to add the supervisor application to a separate computer. For proper functioning, the separate computer running the Supervisor application must be connected to the same network as the Abyssal OS Overlay Module. If you want to open a previously closed overlay application, click on the icon for the overlay that is on the desktop of the monitor you want to open it in. Monitor 1 Monitor 2 Monitor 3 Monitor 4 14 Example of a configuration in which the supervisor app was opened in the second monitor

15 Using the Abyssal OS Overlay Module Software The Overlay Application The overlay application needs no user interaction, it is remotely configured and controlled by the supervisor application. This application is focused on processing the video and overlaying the telemetry information. 15

16 The supervisor application 1. Home A E F B C G D 16

17 A) Currently active items shows the system s current worksite, mission, and dive log; NOTE Geographical Coordinates are used to specify the geographical coordinate system that you are using for that worksite. It is used to parse the positioning system data stream so that the system can convert from Latitude and Longitude to Northing and Easting. Projected coordinates are used to specify the projection system for the Northing and Easting. Additionally, if the system is receiving the positioning data in northing and easting, it uses these coordinates to convert back to Latitude and Longitude for use in the overlay. B) System Status turns red or yellow to raise issues, such as failing to connect to the Abyssal OS Server or finding problems with the telemetry input; C) Shortcut to take snapshot (Media Gallery); D) Main Menu; E) Worksite management Shows you the current selected worksite, and its geographical and projected coordinates; clicking on the worksite opens the worksite management in which you can add, remove, or edit worksite information; clicking the coordinates allows you to change the coordinate system that is used on the current worksite; F) Mission management Shows you the current selected mission; clicking on the mission opens the mission management in which you can add, remove, or edit mission information. G) Map Puts into geographical context vessels, worksites, weather, wind and currents. This information comes through a specialized service that needs dedicated credentials. The toggle buttons allow you to select which information is visible. 17

18 2. Overlay Editor NOTES E Drag items in the profile overlay to organize them according to your preference. You can also change the font size for each item. Select multiple item(s) with Ctrl+Click. A B C D A) Overlay Profile List you can add new profiles, export/import, edit the name, clone or delete a profile; B) Tether Management System menu toggle TMS/Cage telemetry information; C) Insert text boxes and images; 18

19 D) Toggle the edition grid (which makes elements snap to the grid s points), undo the previous action (also available with the Ctrl+Z shortcut), and delete profiles; E) ROV Telemetry menu toggle ROV related telemetry and positioning information, turn on/off date and time, worksite, mission, and dive information. 3. Video Recorder The video recorder module is optional A C B D 19

20 The Video Recorder gallery allows you to record the input feed from the monitor directly onto the SSD Disk, or to play any video from the disks that has the selected codec: A) Double click any listed video to play that video, directly from the recorder; B) Press the Play/Stop icon to play/stop the videos. All the videos will be played, looping back when finished; C) Press the Record icon to start recording on the selected disk slot. To stop it, press the Stop icon or press the Record icon again. D) Press SLOT 1 or SLOT 2 to change the currently accessed slot. This places the timeline on the slot s first video. Due to physical constraints, the video preview is only available on the Abyssal deployed system, and not on remote Supervisor applications. 20

21 4. Media Gallery A C B A) Take a new snapshot of the selected monitors; B) Search the snapshots by file name; C) Review the snapshots, grouped by date: Expand or collapse a group of snapshots; 21

22 Edit the file name of a snapshot; Open the snapshot s image; Open the snapshot s containing folder and select the file. If there is an active dive log when a snapshot is taken, an automatic log entry is added that registers the snapshots. 22

23 5. Dive Log The dive log module is optional. C A B G F D E F The initial screen lists the Dive Logs and their details. Open a Dive Log and see its list of Dive Log Entries. a. Dive Logs A) Generate a mission report for the selected mission. 23

24 NOTES You can open the mission report in any normal browser. If you wish to copy or share the mission report, include all the files by copying the entire folder. a. After you select a target folder, the system generates a mission report; b. The report is a portable HTML5 page which can be viewed in a web browser. B) Create new Dive Log. C) Filter Dive Logs by their worksite and mission. D) Select a Dive Log on the list, double-click it or press the arrow button (G) to go to its Dive Log Entry list. E) Mark a Dive Log as the target of all new events by activating it as the current. F) Fill and edit Dive Log details. The creation date and total time are automatically filled by the system according to the date of the entries tagged on deck and off deck. G) Navigation button to enter Dive Log Entries. 24

25 b. Dive Log Entries B A C D A) Add or delete entries. B) List of all events identified by: TYPE: Info, for user generated. System, Warning or Error, for automatically generated entries; 25

26 DESCRIPTION: To edit, click on the text or press the edit icon (pencil). Save by pressing ENTER key or edit icon again; TAG: Quickly highlight what the entry is related to. To add tag click on the tag area or press the tag icon to open a list of existing tags. If no tags match your search, pressing ENTER will create that new tag; DATE: Automatically filled when a new entry is created. It can be edited by typing the desired date or by pressing the date icon. C) Filter entries list by toggling the entry type icons and tags on and off, and by keyword on search box. D) Add, edit and delete tags. To edit name double-click on the text or press the edit icon. Click its color square button to change to another color. 26

27 6. Settings a. Telemetry Telemetry Input Settings Allows you to invert certain variables according to your standard. For example, for some ROV models a negative pitch means upwards. Ethernet Settings Allows you to start or stop the server that receives SerialTap (Oceaneering) telemetry and configure the IDs of the ROV and TMS. 27

28 In the Serial configuration area, you can: Add new source; Rescan for new sources (only works if sources are currently streaming); If you are using a Tritech Positioning system with multiple units, you can add a Unit-ID under the relevant telemetry source; You can click the eye button on a source to see the live feed on that serial port. 28

29 b. Routing These settings allow you to configure each of the four screens. Screen 1 uses the Input Video Feed 1 on the video capture card, and so on. Press Identify to show on each screen their respective number. You can select the overlay profile for each camera. Make sure to configure the camera s field of view, in order to have an accurate artificial horizon on the overlay. If you have Pan and Tilt telemetry streaming to the system for a given camera, enable it and specify its camera ID. 29

30 c. System IMPORTANT Choosing the Length Unit tells the system to interpret the data coming through telemetry in that unit. If you choose feet as a unit, the system will interpret 200 in depth as 200 feet. Here you can choose the length unit in which you are working; it will change how the telemetry input is interpreted, and the units of any value that appears on screen. You can also configure the time the system waits before raising a no positioning warning. 30

31 Error! No text of specified style in document.