Come Celebrate With Me

Transcription

1 Come Celebrate With Me Bring out these festive placemats and napkins when planning a special birthday. MasterWorks Lite and its easy to use functionality are sure to add a fun personality to your birthday table. Skill Level: Beginner Created by: Diane Kron, Software Project Manager {Designer s Gallery Project} Come Celebrate With Me Page 1

2 Supplies: MasterWorks Lite by Designer s Gallery Baby Lock Ellegante embroidery machine (Confetti & Streamers image (downloaded) 4 purchased placemats and napkins Embroidery & bobbin thread Dissolve-away mesh stabilizer Temporary spray adhesive Instructions: 1. Open the program by clicking on the MasterWorks Lite icon on the desktop. 2. Click on the down arrow next to the Cross Stitch Wizard icon. Select the Auto Digitizing Wizard from the fly out. 3. Click on Select Image and retrieve the image from the location where the image has been downloaded and saved. Click on the name of the image and Open. Click on Next to proceed to the Image Transformation field. 4. In the Image Transformation field, rely on the size of the image and click on Next to continue to the Color Reduction field. 5. In the Color Reduction field, no changes are needed. Click on Next to proceed to the Vectorizing field. 6. Make no changes. Click on Next to move forward. 7. In the Judgment field, click on Finish to send the design to the workspace. The design will be digitized. We will make several changes to the design before the design is complete and ready to embroider. 8. Click on the New Page icon to open a new workspace. 9. On the new page, click on the Text icon and left click anywhere on the workspace. When the Properties for the text opens, type in 50 in the Text field. Select Breeze Script from the drop down in the Font field. Change the Height of the font to 45mm and click on Apply. Change the color to a bright green using the color palette of your choice. {Designer s Gallery Project} Come Celebrate With Me Page 2

3 10. Repeat step 8 to produce the following phrase The Big in the Text field. Change the font size to 15mm, the Font to Block Compact, and the color to orange. 11. Under Sequence View, select All Items. 12. To make sure that the items are positioned properly, click on the Down arrow next to the Center icon and select Horizontal Center Align. 13. Click on the Design 1 tab located above the workspace. This is the page with the digitized design. 14. Left click to select the yellow streamer. 15. Right click and choose Copy from the list of commands. 16. Open the Design 2 tab and right click. Select Paste from the list of commands. This will place the duplicated streamer on the same workspace as the lettering. 17. Change the color of the streamer to purple. 18. With the purple streamer selected, click on Rotate Right and then Flip Vertical. Move the streamer to the bottom right of the lettering (as shown in the illustration below). {Designer s Gallery Project} Come Celebrate With Me Page 3

4 19. Open Design 1 workspace and select the red streamer. 20. Right click and choose Copy from the list of commands. 21. Open Design 2 workspace. Right click and choose Paste from the list of commands to place the streamer on this workspace. 22. In the top right corner, outside of the selection box, is a blue circle. Place the cursor over the blue circle and left click to rotate the design and place the streamer on the top right side of the lettering (as shown in the illustration below). Blue Circle 23. Change the color of this streamer to yellow. 24. Copy and Paste each of the two streamers and then Flip Horizontal. Place the duplicated streamers to the left of the lettering. Change the {Designer s Gallery Project} Come Celebrate With Me Page 4

5 colors to blue and pink (as shown in the illustration below). 25. Select each of the streamers and change the type of stitch by clicking on the Auto Column tool. 26. Click on the Design 1 tab and Copy and Paste several of the confetti pieces to Design 2 workspace. Re-color the confetti sections using the same colors used in the lettering and on the streamers. Place the confetti sections around the lettering and the streamers. (Use the illustration below for placement and coloring options.) 27. After all of the pieces have been placed and re-colored, select All Items and click on Color Sort. This will rearrange the stitch order so that all the same colors will embroider at the same time. This will eliminate thread changes and shorten the embroidery time. 28. Resize the complete design, if needed, so that it will fit in the largest hoop for your machine. 29. To save the design, click on File, Save As. Give your design a name Confetti and Streamers and save as a.blf working file format. {Designer s Gallery Project} Come Celebrate With Me Page 5

6 30. To embroider the design, click on File, Save As and save as a.pes file that your machine will read. Save to the media source that your machine will read. 31. Hoop the dissolve-away mesh stabilizer and spray with a temporary spray adhesive. 32. Fold the placemat in half horizontally and finger crease. Rotate the placemat and fold in half vertically and finger press. This will mark the center point of the placemat. 33. Place the horizontal fold line in the hoop matching up the side markings on the hoop with the fold line for perfect placement. Make sure that the vertical fold line is lined up with the markings on the top and bottom of the hoop. 34. Retrieve the design from the media source and embroider the design on each of the 4 placemats. 35. To create the design for the napkins, Copy and Paste three streamers on the Design 3 workspace. Save the design and embroider using the same hooping and stabilizing techniques used above. Place the design approximately 1 ½ above the point of the napkin. Enjoy your table setting! For other exciting projects like this one, visit our Web site at {Designer s Gallery Project} Come Celebrate With Me Page 6