System Accessories. features and benefits. standards. An Evolant Solutions Product
|
|
- Nora Baker
- 6 years ago
- Views:
Transcription
1 features and benefits Accessories designed specifically for the UMOXS cross-connect system Sealed plant design Wire termination tool and fixture Multi- or single-pair test probes standards UMOXS Cross-Connect System Connector Photo COP249 SPECIFICATION SHEET EVO-377-EN PAGE 1 Integrates seamlessly with existing UMOXS components Gel-sealed IDC contacts and grease-filled retainers prevent moisture damage Ensures fast and accurate wire termination Allow mass or individual circuit testing UL Listed to United States and Canadian safety standards Category 5 rating Universal MOXS (UMOXS ) Cross-Connect System Connector Corning Cable Systems Universal MOXS (UMOXS) Cross-Connect System connector is a 25-pair gelfilled distribution connector for single-pair, bridging or multiplexing terminations. The UMOXS Cross-Connect System connector features environmentally protected contacts using a sealing compound compatible with electronic circuits (non-silicone) and inside wire insulation. The UMOXS Cross-Connect System connector is designed for indoor or outdoor outside plant (OSP) applications building entrance terminals (BETs), remotes and subscriber demarcation points. Each UMOXS Cross-Connect System connector contains double-sided insulation displacement connectors (IDCs). These IDCs will terminate from 22 to 26 AWG (0.69 to 0.4 mm) plastic insulated conductors with a maximum diameter of 1.2 mm (0.048 in). The UMOXS Cross-Connect System connector is easily identified by stamped code numbers and by pair identification markings on the front and back of the plastic molding. It is molded in gray to blend in with other BETs, remotes and subscriber demarcation products and is Category 5 rated. Interface Connector - UMOXS1A A 25-pair connector for single-pair terminations (one pair IN, one pair OUT ). Used for terminating feeder and distribution pairs for cross-connecting. Multiplexing Connector - UMOXS5A A 25-pair connector with sets of five pairs of contacts. Normally used for multiparty service (one pair IN, up to five pairs OUT ). PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING
2 specifications Plastic Material Polycarbonate, UL 94-0, Gray Sealant Material Insulation Displacement Connections Contact Resistance Environmental Characteristics Non-silicone gel High-tensile phosphor bronze with bright tin plating < 1 milliohm -40º to +70ºC (-40º to +158ºF) Product Catalog Code Number Description UMOXS1A UMOXS1A UMOXS Cross-Connect System Connector, single contact UMOXS5A UMOXS5A UMOXS Cross-Connect System Connector, 5-pair contacts package information Standard Dimensions Weight Pack Qty (H x W x D) cm (in) kg (lb) x 10.2 x (7.3 x 3.0 x 2.6) (2.4) SPECIFICATION SHEET EVO-377-EN PAGE 2
3 Universal MOXS (UMOXS ) Cross-Connect System Retainer Corning Cable Systems UMOXS Cross-Connect System retainers provide an encapsulation system for the cable and the UMOXS connectors. They are made of plastic with a unique spring-loaded cover designed to prevent the retainer from being left completely open. In addition, some retainers are supplied with a non-conductive reenterable sealant to provide complete environmental protection for the feeder and distribution cable terminations. The retainers attach to the mounting columns to hold the connectors at the correct location and protect them from damage. Each retainer incorporates a cable strain-relief point at the rear and an integral labeling slot for pair designation labels on the front. Product Catalog Code Number Description UMOXS Cross-Connect System Retainers Photo COP264 The retainers are available in various colors for circuit identification green for feeder and blue for distribution. In addition, gray and red retainers are available for miscellaneous and special services applications. Flame-retardant versions of the green and blue retainers are available. QRE1A A UMOXS Cross-Connect System Retainer, feeder (green), with sealant QRE2A A UMOXS Cross-Connect System Retainer, distribution (blue), with sealant QRE3A A UMOXS Cross-Connect System Retainer, feeder (green), flame-retardant, without sealant QRE4A A UMOXS Cross-Connect System Retainer, distribution (blue), flame-retardant, without sealant KRE5A KRE5A UMOXS Cross-Connect System Retainer, miscellaneous (gray) with sealant KRE6A KRE6A UMOXS Cross-Connect System Retainer, special services (red), with sealant KRE7A KRE7A UMOXS Cross-Connect System Retainer, feeder (green), flame-retardant, with sealant KRE8A KRE8A UMOXS Cross-Connect System Retainer, distribution (blue), flame-retardant, with sealant package information Standard Dimensions Weight Pack Qty (H x W x D) cm (in) kg (lb) x 24.5 x (10 x 10 x 8) (1.9) PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-377-EN PAGE 3
4 Terminating Fixture - QFE1A This terminating fixture supports the UMOXS Cross- Connect System connector during the termination of the cable pairs. It facilitates the installation of the retainer and ensures that there is the correct amount of slack in each binder group. The fixture is made of metal, with a two-position locking head. Slots and latches hold it in position on the mounting column. Posts for the binder group, wire guides for the pairs and the color-coded pair-check strip facilitate conductor placement and ensure proper wiring. A plastic carrying case is supplied with each fixture. Connection Tool - TMOXS16A A spring-activated seating and cutting tool for terminating 22, 24 and 26 AWG (0.63, 0.5 and 0.4 mm), plastic insulated conductors on the UMOXS Cross-Connect System connectors. A turn button on the handle adjusts the tool for seating only, or for seating and cutting the conductors. UMOXS Cross-Connect System Terminating Fixture Photo COP257 UMOXS Cross-Connect System Connection Tool Photo COP253 Product Catalog Standard Size (H x W x D) Weight Code Number Description Pack cm (in) kg (lb) QFE1A A UMOXS Terminating Fixture 1 33 x 19 x (13 x 7.25 x 2.75) (2.7) TMOXS16A A UMOXS Connection Tool 1 16 x 4 x (6.25 x 1.75 x 1) (0.4) SPECIFICATION SHEET EVO-377-EN PAGE 4
5 Manual Locking Test Probe - TMOXS17A This test probe is a test adapter to allow testing access to a single pair on any UMOXS Cross-Connect System connector. It is color coded to indicate red ring (right); black tip (left). A TOUCH and GO feature allows quick testing without fully attaching the test probe to the connector. The wire leads are 6-in long and terminated with two alligator clips to provide test access with other types of terminations. Self-Locking Test Probe - TMOXS37A This test probe is a test adapter to allow testing access to a single pair on any UMOXS Cross-Connect System connector. The test probe is color coded to indicate red ring (right); black tip (left). It provides a side opening to accommodate a secondary test set. The wire leads are 12-in long and terminated with two locking alligator clips to provide test access with other types of terminations. Test Connector - TMOXS22A This test adapter is made of fire-retardant plastic to allow testing access to all 25 pairs of a UMOXS Cross- Connect System connector. The test connector is held in place by spring clips that attach to the retainer. When the test connector is in place, the top row of contacts (tip) and the bottom row (ring) allow direct access to any pair. TMOXS17A Cross-Connect System Test Probe Photo COP255 TMOXS21A Cross-Connect System Test Shoe Photo COP256 Test Shoe - TMOXS21A A 25-pair, TMOXS22A Test Connector with a 3.05 m (10-ft long) cable and a Cinch-Jones connector. This test shoe is intended to be used with automatic pair identification test sets. Product Catalog Standard Size (H x W x D) Weight Code Number Description Pack cm (in) kg (lb) TMOXS17A A UMOXS Test Probe, 1 20 x 15 x manual locking (8 x 6 x 0.5) (0.1) TMOXS37A TMOXS37A UMOXS Test Probe, 1 23 x 15 x self-locking (9 x 6 x 0.5) (0.1) TMOXS22A A UMOXS Test Connector, 1 19 x 7 x pair (7.5 x 2.75 x 1) (0.6) TMOXS21A A UMOXS Test Shoe, 1 28 x 23 x pair (11 x 9 x 5) (2.3) PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-377-EN PAGE 5
6 Special Service Guard - GMOXS23 The UMOXS Special Service Guard is a plastic guard that snaps onto any UMOXS Connector. Available in red or yellow, these guards are used to prevent unauthorized or accidental contact with special services circuits. UMOXS Special Service Guard - Red (GMOXS23A) Photo COP291 Product Catalog Code Number Description GMOXS23A A Special Service Guard, UMOXS connector, red GMOXS23B GMOXS23B Special Service Guard, UMOXS connector, yellow package information Standard Dimensions Weight Pack Qty (H x W x D) cm (in) kg (lb) x 29.2 x (16.0 x 11.5 x 1.0) (1.0) SPECIFICATION SHEET EVO-377-EN PAGE 6
7 UMOXS Pair Count Designation Labels Pair count designation labels are used to provide clear circuit identification for each UMOXS connector. The label fits into a slot located on the front of the UMOXS Retainer. Labels are pre-printed in 25-pair increments on a sheet of 24 labels. Refer to the catalog number descriptions for the pair count ranges available. Catalog Number Description P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs P UMOXS Pair Count Designation Labels, pairs package information Standard Dimensions Weight Pack Qty (H x W x D) cm (in) kg (lb) x 22.9 x (11.0 x 9.0 x 3.0) (2.6) UMOXS Pair Count Designation Labels & Retainer with Label Photo COP293 PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-377-EN PAGE 7
8 notes Corning Cable Systems LLC PO Box 489 Hickory, NC USA FAX: International: Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. Evolant is a registered trademark of Corning Cable Systems Brands, Inc. MOXS and UMOXS are trademarks of Corning Cable Systems Brands,Inc. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. 2004, 2011 Corning Cable Systems. All rights reserved. Published in the USA. EVO-377-EN / March 2011 SPECIFICATION SHEET EVO-377-EN PAGE 8
Closet Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
More informationCloset Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
More informationSplice Trays An Evolant Solutions Product
Applications For use with indoor or outdoor splice hardware Protects and manages fibers and fiber splices Used at field splice, transition splice and end splice locations Description splice trays use proven
More informationMS 2. Modular Splicing System. Communication Markets Division
MS 2 Modular Splicing System Copper Splicing Connectors from 3M A WORLD OF DIFFERENCE Core Technologies... The Evolution of Copper Splicing Core Technologies... Scotchlok Connectors and MS2 Modules 3M
More informationIndoor Protected Entrance Terminal 4588 Series
Indoor Protected Entrance Terminal 4588 Series Instructions Underwriters Laboratories (UL) Listed September 2003 78-8135-1209-8-A 1.0 General The 3M Indoor Protected Entrance Terminal (PET) 4588 Series
More information3M Indoor Protected Building Entrance Terminal 4588V-QCS Series
3M Indoor Protected Building Entrance Terminal 4588V-QCS Series with 3M Quick Connect System 2811 Dry Flame Retardant Block Instructions Underwriters Laboratories (UL 348X) Listed April 2010 3 78-0013-1813-4-A
More informationData sheet C6 A modul 90 jack
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: module, 90 cable feed solid,
More informationCLOSET CONNECTOR HOUSING
CLOSET CONNECTOR HOUSING -01U CCH-02U CCH-03U CCH-04U CCH-01U CCH-02U CCH-03U CCH-04U CCH-01U CCH-02U CCH-03U CCH-04U -01U CCH-02U CCH-03U CCH-04U CCH-01U CCH-02U CCH-03U CCH-04U CCH-01U CCH-02U CCH-03U
More informationOptiSheath MultiPort Terminal
Features and Benefits OptiTap cable assembly connector ports for customer drop terminations Lower installation cost and increase speed of customer connection Available stubbed or preterminated with OptiTip
More informationModular splicing connectors
Modular splicing connectors CAHORS offers a splicing system you can depend on for highly efficient, reliable yet highly economical connections. Of proven technology the modular connectors are used extensively
More informationData sheet C6 A modul 1 port 180 M AP pure white
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification surface-mount termination unit with C6modul 180 certified to GHMT Cat.6 re-embedded PVP component
More information4888 and 4988 Outdoor Protected Entrance Terminals
4888 and 4988 Outdoor Protected Entrance Terminals Underwriters Laboratories (UL) Listed Instructions January 1997 34-7031-7272-5 Revision C Contents: 1.0 General... 1 2.0 Accessories... 2 3.0 Protector
More information3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series
3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series with 3M Quick Connect System (QCS) 2811 Dry Flame-Retardant Block and RJ-11 Test Ports Instructions Underwriters Laboratories (UL 348X)
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More information3M Indoor Protected Building Entrance Terminal 4788V-QCS Series
The Network of Networks. 3M Indoor Protected Building Entrance Terminal 4788V-QCS Series with 3M Quick Connect System (QCS) 2811 Dry Flame Retardant Block for Field-Terminated Building Cables Instructions
More informationConnector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
More information0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY
ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN
More informationOptiSheath Aerial Terminal, SCA-9T Series
Features and Benefits Design includes aerial hanging brackets Easy installation Quick-release clamps Easy terminal re-entry Individual strain-relief Fiber protection and continuity Cable sealing and reusable
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationEDGE Solutions Trunk Cable, SMF-28 Ultra OS2, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
More informationApril 2017 Rev 1
Application Specification 860635357 April 2017 Rev 1 8-Position Unshielded Slim-Line Modular Plug (MP-6AU) NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationCentral Offi ce Connector Block Accessories
Features Convenient test access Rapid fault diagnosis Industry-standard connectors Rugged, long-lasting materials Central Offi ce Connector Block Accessories Test Cords 303-1001 This test cord plugs into
More information3 710 Splicing System 1
3 710 Splicing System 1 3M 710 Splicing System Modules are available for straight, half-tap and bridge splicing Several splice module configurations allow multiple options when designing a communications
More informationData sheet C6 A modul 2 port 180 M UP pure white
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification flush-mounted termination unit with C6 A modul 180 certified to GHMT Cat.6 A re-embedded PVP
More informationPretium Rack-mountable 1U Housing Hardware
revision history Issue Date Reason for Change table of contents STANDARD RECOMMENDED PROCEDURE 003-649 ISSUE 5 JANUARY 2009 PAGE 1 OF 10 Pretium Rack-mountable 1U Housing Hardware p/n 003-649, Issue 5
More informationField-terminated RJ45 connector with housing. Color housing: gray (RAL 7042). Color termination block: red.
FM45 Connector Cat. 6 A IP20, 4P, TIA 568-A/B, 10x R815651 966704105 10 Stk. 090.7437 / ähnliche Abbildung Instruction manual Field-terminated connector with housing. Color housing: gray (RAL 7042). Color
More informationUniCam Connector Installation Tool Kits
features and benefits Terminates single-mode and multimode fibers Convenient carrying case Continuity test set (CTS) Visual feedback signal (TKT-UNICAM-PFC) Pretium Cleaver (FBC-05) SPECIFICATION SHEET
More informationC Pin Solid-State Protector Modules An Evolant Solutions Product
C-303 5-Pin Solid-State Protector Modules Description C-303 5-Pin Protector Modules provide state-of-the-art protection in a 5-pin type protector for use in central office connector, remote, and building
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) Based upon wire-to-board crimp style PA connectors, the PA series family of connector have
More informationCloset Connector Housings (CCH)
Closet Connector Housings (CCH) Designed based on thousands of hours of customer feedback, Corning closet connector housings (CCHs) offer more than two dozen innovative features that make installation
More informationProduct information Patch Cord Cat. 6A, S/FTP, 4P, LSFRZH, gray, RJ45/s- RJ45/s, 1.0 m
Product information Patch Cord Cat. 6A, S/FTP, 4P, LSFRZH, gray, RJ45/s- RJ45/s, 1.0 m R509858 101376015 10 pcs Cable identification: S/FTP Outer jacket: LSFRZH Conductor diameter copper strand: AWG 26/7
More informationModular plugs, accessories and tooling
Modular plugs, accessories and tooling Introducing the new Cat 6A/6 modular plugs, slim-line boots and color clips CommScope modular plug portfolio CommScope offers a vast portfolio of Modular Plugs for
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationD-Series High Reliability Circular Connectors
D-Series High Reliability Circular Connectors Technology Company, Inc. integramate D-Series Circular Connectors QA Technology integramate D-Series Connectors are high quality, plastic circular connectors
More informationOTS-600 Series Optical Sources, Meters, Testers and Kits with Data Storage Capabilities
features and benefits Large LCD screen and soft key menus Source and meter in one unit Auto wavelength switching and detection USB data ports OTS-600 Series Light Source and Power Meter Photo LAN1193 Ease
More information3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series
3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series Instructions Underwriters Laboratories (UL 348X) Listed February 2017 78-0013-6127-4-B 2 February 2017 78-0013-6127-4-B 1.0 General The
More informationTOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS For the very first time, sensor/actuator wiring is pluggable between
More informationPretium EDGE FX Solutions
Pretium EDGE FX Solutions for Enterprise Data Centers and Storage Area Networks Corning Cable Systems Pretium EDGE FX Solutions create a fixed-tray fiber optic tip-to-tip solution for Data Centers and
More informationfeatures and benefits
features and benefits Touch screen with graphical user interface Built-in interactive training videos Equipped with both LID System and CDS System 3-axis core-alignment technologies Fastest total splice
More informationALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationPretium EDGE HD Solutions A LANscape Pretium Solutions Product
Pretium EDGE HD Solutions for Enterprise Data Centers and Storage Area Networks Corning Pretium EDGE HD solutions create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs)
More information4188, 4288, 4288-S and 4688 Protected Entrance Terminals
4188, 4288, 4288-S and 4688 Protected Entrance Terminals Instructions Underwriters Laboratories (UL) Listed January 1997 34-7041-3837-8 Revision A Contents: 1.0 General... 1 2.0 Accessories... 2 3.0 Protector
More informationREMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS The e-con standard was developed in Japan in 2001 by a group of Japanese manufacturers in order to standardize connections from sensors to terminals.
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationModular plugs, accessories and tooling
Modular plugs, accessories and tooling Introducing the new Cat 6A/6 modular plugs, slim-line boots and color clips CommScope modular plug portfolio CommScope offers a vast portfolio of Modular Plugs for
More informationfeatures and benefits
features and benefits Touch screen with graphical user interface Built-in interactive training videos 3-axis core-alignment by the CDS system Fastest total splice cycle time in the industry Two USB ports
More information3M Add-On Terminals 4220P (100, 200, 300 & 400 pairs)
3M Add-On Terminals 4220P (100, 200, 300 & 400 pairs) Instructions August 2011 3 78-8130-2330-1-C 1.0 General 1.1 The 3M Add-On Terminals 4220P-100, 4220P-200, 4220P-300 and 4220P-400 are designed to expand
More informationUTP Cat 5e cable (200 MHz) (PVC sheath)
JetLan is the only structured cabling system that includes all the passive components required for the installation or adaptation of your data network, as we include all the different types of high performance
More informationHan R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
More informationPlug & Play AnyLAN Systems A LANscape Solutions Product
Description Corning Cable Systems Plug & Play AnyLAN Systems is a preterminated local area network cabling solution that can be installed up to 50 percent faster per splice or termination point than traditional
More information1/2 Introduction. SIMBOX LC 1/7 Introduction 1/8 Flush-mounting and surfacemounting. 1/9 Dimensional drawings
Siemens AG 200 ALPHA SIMBOX Small Distribution Boards /2 Introduction /2 Introduction /3 Flush-mounting and hollow-wall distribution boards /4 Hood-type distribution boards /5 Accessories /6 Dimensional
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationPRODUCT DATA SHEET. ColorBright Color Changing. RGB 150 Series. Year Warranty.
PRODUCT DATA SHEET ColorBright Color Changing RGB 150 Series 5 Year Warranty www.flexfireleds.com Weatherproof Color Changing RGB 150 Series Product Datasheet Description The Outdoor ColorBright Color
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationFemale connector; 2-pole; pin spacing 5 mm / in; codable; only 1 locking latch; with coding finger; with latch
Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only locking latch; with coding finger; with latch Item No: 23-02/026-000 Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only
More informationWall-Mountable Connector Housings (WCH)
Features and Benefits Interconnect and cross-connect capabilities Ideal for field splicing and connectorization Accepts CCH cassettes, panels and modules Variety of preterminated and field-installable
More informationcpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies
cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More informationTelephone Accessories USA / Canada - Telefon-Zubehör
7590 01 Standard Flush Mount Jacks Flush mount jacks are available in smooth-finish single-jack or duplex models, and Decora styles. ll feature one-piece construction and install easily in standard electrical
More information8WH5 Combination Plug-In Terminals
8WH Combination Plug-In Terminals /2 Introduction / 8WH through-type terminals 1) /7 8WH hybrid through-type terminals with ipo connection /8 8WH9 plugs 1) 1) Also available as a PE version More technical
More informationMODULAR PLUGS, ACCESSORIES AND TOOLING
MODULAR PLUGS, ACCESSORIES AND TOOLING 4th Edition Introducing the New Universal Contact BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING TE CONNECTIVITY MODULAR PLUG PORTFOLIO TE
More informationSales: Technical: Fax:
DATA SHEET Weatherproof Order code Manufacturer code Description 23-2650 PX0410/02S/5560 2 WAY FREE SOCKET MICRO BUCCANNEER 23-2652 PX0410/03S/5560 3 WAY FREE SOCKET MICRO BUCCANNEER (RC) 23-2654 PX0410/04S/4550
More informationALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
More information[.050 (1.27mm) Density. D-Microminiature]
Commercial [.050 (1.27mm) Density Solder Introduction Cup/Wire D-Microminiature] Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
More informationFlexNAP Outside Plant System
Features and Benefits Factory-installed, sealed splice points (2, 4, 6, 8 or 12 fibers per tether) Drastically reduces field splicing with a predetermined loss at each waterproof tether attachment point
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More information3M Quick Connect System (QCS) 2811
Communication Markets Division 3M Quick Connect System (QCS) 2811 Designed for your broadband network The 3M Quick Connect System (QCS) 2811 is an insulation displacement connector (IDC) termination system
More informationIndustrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More informationSpecifications. Description. Degree of Protection. Input Voltage (Relay type) Input Voltage (Solid-State type) Electrical Design Life (Relay type)
General Principles 9-10-Safety Logic Power General Purpose 800Z-GF2Q5 Heavy Industrial 800Z-HF1 General Purpose 800Z-GL3Q5B Heavy Industrial 800Z-HL1Y Bulletin 800Z Zero-Force are designed for use by machine
More informationODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
More informationTE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
More informationOptiTect Indoor Local Convergence Cabinet, Gen III Series
Features and Benefits Industry-leading cabinet size Significant freight, storage and installation efficiencies Full factory-stubbed cabinets Enables quicker installation and rapid emergency restoration
More informationJAN 16 Rev B
ANSI C136.41-2013 Rotatable Dimming Receptacles Application Specification 20 JAN 16 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
More informationAdapter Kit - QSI Electronics to G-Series Meter Installation Instructions
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions These installation instructions cover the adapter kit installation of the QSI1, QSI2 and QSI3 versions of communications electronics
More information2 PIECE BOARD-TO-BOARD
2 PIECE BOARD-TO-BOARD 201-01-123 1. SPECIFICATION DISTRIBUTION No restrictions for issue 2. SCOPE This specification contains the application notes for the 9159 two part connectors. 3. PRODUCTS 10-9159
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationTOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
More informationREMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS A concept that is saving your most valuable asset your time. The contact design based on insulation displacement of our RITS (Remote I/O Termination
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3011
CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3011 DRAWING TITLE: 5V & 12V Power Distribution Cable DRAWING
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationLCC1653/01, LRI1653/01 ActiLume DALI System
1/8 Product description The Philips ActiLume lighting control system consists of a small, lightweight sensor and controller, designed for easy integration into luminaires. ActiLume is a true Plug and Play
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3014
CABLE DRAWING: DRAWING TITLE: ATIM-T Power Cable POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3014 DRAWING NO.: MWACAB-0014
More informationThrough/Ground Conductor/Ex and Double-Potential Terminal Blocks 1 (1.5) mm, 2000 Series
54 TOPJOB @ Through/Ground Conductor/Ex and Double-Potential Terminal Blocks (.5) mm, 2000 Series 0.4 - (.5) mm I N 3.5 A (8 A) AWG 24-00 V, 0 AU 00 V, 0 A2 Terminal block width 3.5 mm / 0.38 in L 9 -
More informationControl Box Setup - PRSalpha
888-680-4466 ShopBotTools.com Control Box Setup - PRSalpha Copyright 2016 ShopBot Tools, Inc. page 1 Copyright 2016 ShopBot Tools, Inc. page 2 Parts List: Hooking Up a PRSalpha Gantry Tool Powering the
More informationAMP- LATCH* Universal
AMP- LATCH* Universal Application Specification Input/Output 114-7011 Pin Connectors 21 MAR 11 Rev C NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More information