V1.2.0 Importer Software Upgrade Procedure

Transcription

1 V1.2.0 Importer Software Upgrade Procedure IS05013 Original Issue November 2005 Nautel Limited Peggy's Cove Road, Hackett's Cove, NS, Canada B3Z 3J4 T F U.S. customers please contact: Nautel Maine, Inc. 201 Target Industrial Circle, Bangor ME T F Copyright 2005 NAUTEL. All rights reserved.

2

3 IS05013 V1.2.0 Importer Software Upgrade Procedure INFORMATION SHEET NOTES: This procedure will not overwrite the EOC database or the network addresses. However, it is recommended that configuration information in the EOCResMgr and IP addresses be recorded before proceeding. Note: The V1.1.1 EOC database backup files cannot be used to restore configuration information in V This procedure may reset the license expiry date. Record the current license file date by opening the EOCLicenseMgr application. After the upgrade is complete, check the license expiry and if the expiry date is reset to 30 days or less, follow the procedure in the Importer Operation and Maintenance manual to renew the license expiry date. This procedure requires that you enter a service provider username and password. See section , SPS Client Login in the HD Radio Importer User s Guide for instructions on retrieving the username and password for a service provider. 1 Installing v1.2.0 Software Note: During the install [steps (c), (d)], you will be prompted on a number of occasions to click on OK, Next, Install, or to select Accept License Agreement. (a) Insert the Importer V1.2 CD into the Importer s CD-ROM drive. (b) Install the software by dragging the Importer_V1.2.0_NAE91_1_ folder from the CD into the C:\Program Files\Ibiquity Digital\ Importer folder. Next, rename the Importer_V1.2.0_NAE91_1_ folder to Importer1.2Install. (c) Double click the ImporterSetup.exe icon in the Importer1.2Install folder to run the Importer installation. (d) Double click the setup.exe icon in the Importer1.2Install\Importer Tools folder to run the Importer Tools installation. (e) Click on Start > Control Panel > Desktop > Add or Remove Programs to display the Add or Remove Programs window (see Figure 1). (f) Check the version numbers of the Importer and Importer Tools programs. If the Importer software was installed properly, the versions should both be v1.2, and the Microsoft SQL Server Desktop Engine should also be installed (see Figure 1). V1.2.0 Importer Software Upgrade Procedure Page 1 IS05013 Original Issue 1.0

4 Figure 1 Add or Remove Programs Window (g) Organize the Importer software icons on the Windows XP Desktop as shown in Figure 2. This arrangement presents the icons in the order they will be used: first used at the top, last used at the bottom. Figure 2 Importer Software Icons Page 2 Original Issue 1.0 V1.2.0 Importer Software Upgrade Procedure IS05013

5 (h) Edit the following files as shown: C:\Program Files\Ibiquity Digital\Importer\SPSProcessor_1\spsconfig.xml Set the lpspsdelta= value to 3 (it was 0 ). <ClientConfig name="sps Provider" portpad="4444" portaudio="4445" autostart="false" lpspsdelta="3"> <Host> <EOCIPAddr> </EOCIPAddr> <EOCCmdPort>1010</EOCCmdPort> <EOCDataPort>1011</EOCDataPort> C:\Program Files\Ibiquity Digital\Importer\SPSProcessor_2\spsconfig.xml Set the lpspsdelta= value to 3 (it was 0 ). <ClientConfig name="sps Provider" portpad="4444" portaudio="4445" autostart="false" lpspsdelta="3"> <Host> <EOCIPAddr> </EOCIPAddr> <EOCCmdPort>1010</EOCCmdPort> <EOCDataPort>1011</EOCDataPort> (i) Check the following file and edit it as shown if required: C:\Program Files\Ibiquity Digital\Importer\Servers\eocconfig.xml Ensure that the AudioPipe spsdelta= value is set to 3. <EOC> <Database datasource="(local)" catalog="eoc_db_ver_1_1_qos"/> <Exporter ip=" " protocol="tcp"/> <CM cmdport="1010" dataport="1011"/> <LP port="1000"><audiopipe spsdelta="3"/></lp> </EOC> V1.2.0 Importer Software Upgrade Procedure Page 3 IS05013 Original Issue 1.0

6 (j) Double click on the EOCResMrg icon on the Windows XP Desktop (see Figure 2) to open the EnsembleOperations Center User Login dialogue box (Figure 3). Figure 3 Ensemble Operations Centre User Login Dialogue Box (k) Log into the EOCResMgr. Use admin for the User Name and admin for the password. (l) Click the View Exporter Status check box to select it, then click OK to open the EOCResMgr window (see Figure 4). Page 4 Original Issue 1.0 V1.2.0 Importer Software Upgrade Procedure IS05013

7 Figure 4 EOCResMgr Window (m) Click on the appropriate Configuration (2 or 3) to select it. (n) Click Activate Importer Only, then click Activate Selected Configuration. (o) Check the Status in the Importer and Exporter Synch Status section of the window and verify that the status is Synchronized. If it is not, click on Reset. (p) Close the EOCResMgr window. V1.2.0 Importer Software Upgrade Procedure Page 5 IS05013 Original Issue 1.0

8 (q) Double click on the ConnectionMgr icon on the Windows XP Desktop to open the Connection Manager window on the desktop. Caution: This window can be minimized, but be sure to leave the window open on the desktop. Figure 5 Connection Manager (r) Double click on the Logistics Processor icon on the Windows XP Desktop to open the LP menu window. Caution: Be sure to leave this window open on the desktop. Figure 6 Logistics Processor menu (s) Double click on the SPS processor icon (SPS1 or SPS2) on the Windows XP Desktop to open the corresponding SPS Provider1 or SPS Provider2 window (see Figure 7). Page 6 Original Issue 1.0 V1.2.0 Importer Software Upgrade Procedure IS05013

9 Figure 7 SPS Processor Window (SPS1 shown) (t) Click on the Sound Card option in the Audio Source box. (u) Click on the appropriate audio card audio input in the Audio Source box to select it. (v) Click on Connect. Note: The first time you connect the SPS1 or SPS2 processor after software installation, you will get an IEOC Control Login Fail dialogue box because a password is required. Click OK to open a Login dialogue box, and enter the appropriate service provider username and password. (See the NOTES on page 1 of this Information Sheet.) (w) Click Send to start running the selected SPS processor (see Figure 8). (x) Note that once the SPS processor starts running, the dynamic horizontal bar graph at the bottom of the SPS Processor window indicates that the program is running (see Figure 8). V1.2.0 Importer Software Upgrade Procedure Page 7 IS05013 Original Issue 1.0

10 Figure 8 Program Running Page 8 Original Issue 1.0 V1.2.0 Importer Software Upgrade Procedure IS05013

11 (y) To verify that the Audio Cards are receiving audio, click on the Mixer Panel icon at the lower-right corner of the Desktop Taskbar to open the Mixer Panel. Figure 9 Mixer Panel SPS 1 Running (z) Use the Mixer Panel to monitor the audio input level of the audio board specified in the Mixer Panel s title bar: LynxONE 1 is for SPS1 and LynxONE 2 is for SPS2. Note: If you are using two SPS programs, you can click on the Mixer Panel icon a second time to open a second Mixer Panel. Then, go to the Mixer Panel s menu bar and click on Mixer > Mixer# to open the Mixer Panel for the other SPS program. This allows you to monitor both SPS programs at the same time. The Importer software upgrade procedure is now complete. V1.2.0 Importer Software Upgrade Procedure Page 9 IS05013 Original Issue 1.0