User Manual CARFIT Modular System Series CMK

Transcription

1 User Manual CARFIT Modular System Series CMK

2 Table of contents Contents CARFIT Modular System CMK Installation Instructions Using the Clamp Assembly as an Example 1 Mounting support 1 2 Mounting support 2 3 Mounting support 3 4 Mounting support 4 5 Mounting support 5 6 Mounting support 6 7 Clamping a component Legal information These installation instructions are copyright. You are not permitted to reproduce, translate, process using electronic means, duplicate, distribute or publish this documentation or any part of it without the prior express permission of Carl Zeiss Fixture Systems GmbH. Infringers are liable for damages. All rights reserved, especially rights arising from by patents granted or the registration of a utility model. We reserve the right to make changes to these installation instructions. Carl Zeiss Fixture Systems GmbH provides no warranties for these installation instructions, including any implicit warranty for typical commercial quality or suitability 2 for any particular purpose. Carl Zeiss Fixture Systems GmbH accepts no liability for any indirect, coincidental, or direct damage of any kind, or loss of applications arising from the use of these installation instructions. All product names are registered trademarks or trademarks of their respective owners.

3 Contents CARFIT Modular System CMK Kit Configuration Part no. Base Plate 240 x 240 x 15 mm Picture Kit Configuration Part no Adapter M4 x Support Bar Adapter M4 x 22, Support Bar Adapter M4 x Assembly Clamping Clip Adapter M4 M Cramp Assembly Adapter M6 x Clipping Element Assembly Adapter M6 x 22, Connecting Element Assembly Adapter M6 x Angle Adjustable Column Assembly Column Support flat Column for Clip L = Column Support with ball Column for Clip L = Column Support with cone Assembly Column Column Support with V-Block Lock Nut Column Support with V-Block small Adapter M Column Support with V-Block Adapter M Column Support Adapter M6 long Picture 3

4 Installation Instructions Using the Clamp Assembly as an example 4

5 1 Mounting support 1 Step 4 Bolt adapter M4 x 30 ( ) onto base plate ( ). Bolt adapter M4 ( ) onto bracket ( ). Screw lock nut ( ) onto adapter M4 ( ). Bolt adapter M4 x 15 ( ) onto adapter M4 x 30 ( ). Step 3 Bolt bracket ( ) onto adapter M4 x 15 ( ) using socket head screw ( ). Step 5 Step 6 Bolt column support flat 90 ( ) onto adapter M4 ( ) and secure with lock nut ( ). 5

6 2 Mounting support 2 Step 4 Bolt adapter M4 x 30 ( ) onto base plate ( ). Bolt adapter M4 M6 ( ) onto bracket ( ). Step 5 Bolt adapter M4 x 30 ( ) onto adapter M4 x 30 ( ). Bolt column for clip ( ) onto adapter M4 M6 ( ). Step 3 Bolt bracket ( ) onto adapter M4 x 30 ( ) using socket head screw ( ). 6

7 3 Mounting support 3 Step 4 Bolt support bar 1 ( ) onto base plate ( ) using socket head screw ( ). Bolt column support flat with v-block ( ) onto column ( ) and secure with lock nut ( ). Screw column ( ) into the threaded hole on support bar 1 ( ). Step 3 Screw lock nut ( ) onto column ( ). 7

8 4 Mounting support 4 Step 4 Bolt support bar 2 ( ) onto base plate ( ) using socket head screw ( ). Screw connecting element assembly ( ) with set screw ( ) into adapter M6 x 15 ( ). Step 5 Screw adapter M6 x 30 ( ) into the threaded hole on support bar 2 ( ). Screw column for Clip L = 40 ( ) into connecting element assembly ( ). Step 3 Step 6 Screw adapter M6 x 15 ( ) onto adapter M6 x 30 ( ). Tilt connecting element assembly ( ) and column for clip L = 40 ( ) through 45 and secure in place. 8

9 5 Mounting support 5 Step 4 Bolt adapter M4 x 30 ( ) onto base plate ( ). Bolt adapter M4 ( ) onto bracket ( ). Screw lock nut ( ) onto adapter M4 ( ). Connect two adapters M4 x 30 ( ) with one another and screw onto adapter M4 x 30 ( ). Step 3 Bolt bracket ( ) onto adapter M4 x 30 ( ) using socket head screw ( ). Step 5 Step 6 Bolt column support flat ( ) onto adapter M4 ( ) and secure with lock nut ( ). 9

10 6 Mounting support 6 Step 5 Bolt adapter M4 M6 ( ) onto base plate ( ). Screw adapter M6 x 15 ( ) onto connecting element assembly ( ). Step 6 Bolt adapter M6 x 30 ( ) onto adapter M4 M6 ( ). Screw column for clip ( ) onto adapter M6 x 15 ( ). Step 3 Step 7 Screw adapter M6 x 30 ( ) onto adapter M6 x 30 ( ). Tilt connecting element assembly ( ) through 45 and fix in place. Step 4 Screw connecting element assembly ( ) with set screw M6 x 16 ( ) into adapter M6 x 30 ( ). 10

11 7 Clamping a component Insert a component and push against stop ( ). Push the three clamping clips ( ) onto column for clip ( , ) and clamp the component tightly. 11

12 Carl Zeiss Fixture Systems GmbH Auf Rodert Tholey Germany Telefon: +49 (0) Telefax: +49 (0) carfit.metrology.de@zeiss.com EN_68_070_001I Printed in Germany 03/2013 Subject to change in design and scope and result of ongoing technical development. conception, text and design: Carl Zeiss Fixture Systems GmbH