NOTE: Reducing flanges are available in all types and pressures.
|
|
|
- Albert Johnson
- 6 years ago
- Views:
Transcription
1 Flanges Types : Weld Flanges, Slip-On Flanges, Weld Flanges, Threaded Flanges, Flanges, Blind Flanges. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges are available in all types and pressures. To order a reducing flange, state the smaller size first, then the outside diameter of the larger size. Example: 1" X 7 1 2" O.D. 150 SO RF reducing would be a 3" X 1", Raised Faced Reducing. Or, to simplify, just state the actual pipe sizes in order of larger to smaller. Example: 3" X 1" Flanges, Raised Faced Flanges, Reducing Flanges.
2 Class 150 Common Dimensions Bore Length Thru Hub Outside O Thk. C Raised Face R Fillet Radius r B1 B2 B3 Y1 Y2 Y3 1 / / / / / / To be specified by purchaser. 4
3 Class 150 ( 1 /2" TO 3" ONLY) Drilling Approx. Weight Min. Thread Length T Depth of D Hub at Bevel A Hub X Bolt Circle No. Thrd. Sock. W. Blind / / / / / /
4 Class 300 Common Dimensions Bore Length Thru Hub Outside O Thk. C Raised Face R Fillet Radius r B1 B2 B3 Y1 Y2 Y3 1 / / / / / / To be specified by purchaser. 6
5 Class 300 ( 1 /2" TO 3" ONLY) Drilling Approx. Weight Min. Thread Length T Counter Bore Thd. Q Depth of D Hub at Bevel A Hub X Bolt Circle No. Thrd. Sock. W. Blind / / / / / /
6 Class 400 Common Dimensions Bore Length Thru Hub Outside O Thk. C Raised Face R Fillet Radius r B1 B2 B3 Y1 Y2 Y3 SIZES 1 /2" THRU 3 1 /2" To be specified by purchaser. Thickness and length through hub do not include 1 /4" raised face. 8
7 Class 400 ( 1 /2" TO 3" ONLY) Drilling Approx. Weight Min. Thread Length T Hub at Bevel A Hub X Bolt Circle No. Thrd. Sock. W. Blind ARE IDENTICAL WITH CLASS See 300 Class dimensions for dimensions Q and D. 9
8 Class 600 Common Dimensions Bore Length Thru Hub Outside O Thk. C Raised Face R Fillet Radius r B1 B2 B3 Y1 Y2 Y3 1 / / / / / / Thickness and length through hub do not include 1 /4" raised face. To be specified by purchaser. 10
9 Class 600 ( 1 /2" TO 3" ONLY) Drilling Approx. Weight Min. Thread Length T Depth of D Hub at Bevel A Hub X Bolt Circle No. Thrd. Sock. W. Blind / / / / / / See 300 Class dimensions for dimensions Q and D. 11
10 Class 900 Common Dimensions Bore Length Thru Hub Outside O Thk. C Raised Face R Fillet Radius r B1 B2 B3 Y1 Y2 Y3 SIZES 1 /2" THRU 2 1 /2" To be specified by purchaser. Thickness and length through hub do not include 1 /4" raised face. 12
11 Class 900 ( 1 /2" TO 3" ONLY) Drilling Approx. Weight Min. Thread Length T Hub at Bevel A Hub X Bolt Circle No. Thrd. Sock. W. Blind ARE IDENTICAL WITH CLASS See 300 Class dimensions for dimensions Q and D. 13
12 Class 1500 Common Dimensions Bore Length Thru Hub Outside O Thk. C Raised Face R Fillet Radius r B1 B2 B3 Y1 Y2 Y3 1 / / / / / Thickness and length through hub do not include 1 /4" raised face. To be specified by purchaser. 14
13 Class 1500 ( 1 /2" TO 2 1 /2" ONLY) ( 1 /2" TO 2 1 /2" ONLY) Drilling Approx. Weight Min. Thread Length T Depth of D Hub at Bevel A Hub X Bolt Circle No. Thrd. Sock. W. Blind / / / / / See 300 Class dimensions for dimensions Q and D. 15
14 Class 2500 Common Dimensions Bore Length Thru Hub Outside O Thk. C Raised Face R Fillet Radius r B1 B2 B3 Y1 Y2 Y3 1 / / / / / To be specified by purchaser. Class 2500 Slip-Ons are not included in specifications. Thickness and length through hub do not include 1 / " raised face. 16
15 Class 2500 Drilling Approx. Weight Min. Thread Length T Hub at Bevel A Hub X Bolt Circle No. Thrd. Sock. W. Blind / / / / / See 300 Class dimensions for dimensions Q and D. 17
Connections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL
Connections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL CUSTOM SOLUTIONS GLOBAL AVAILABILITY BROAD PRODUCTION CAPABILITY FULL PRODUCT TESTING About AFGlobal
Steel Flanges. Blind Flange. Plain Flange DN PN 10 EN (ISO , DIN 2501)
Steel s Plain Blind N 0-000 PN 6-0 EN 09-(ISO 0-, IN 0) Pipe PN 6 PN 0 Size outside pipe iameter iameter N d d d d d 0 9 90 0 00 0 / 00. 0 0 0 0 0 00 7 0 0 0 6 0 0 00 9 0 0 0 9 6 0 7 7 9 0 0 00 0 9 6 00
WELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
MALE THREAD SPECIFICATIONS
MALE THREAD SPECIFICATIONS PARALLEL MALE THREADS M20 Thread type BSP-m BSP-m BSP-m BSP-m Metric Seal method ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 9974-3 Designation thread ISO 228-1 ISO 228-1
SCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
Thermocouple Technology, Inc.
Series E End Cap Series - Manufacturing Standard Valid only for Overall Length L maximum of 24" and/or one-piece construction barstock *NOTICE: TTEC provides a one piece construction machined barstock
Duo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG EFFECTIVE
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 4-15-13 SUPERDUCT PVC DUCT PIPE Part No. Size O.D. Wall Std. Length List Price Per Ft. List Price Per Ft. Extruded 10 ft. 20 ft. 1033-PP-02
First of all, model the component according to the dimensions shown below. Finally save the model as Flange-cutaway.
Configurations In the following tutorial we will look at using configurations. Configurations may also be used to create different versions of a component for display purposes. Configuration may also be
SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
Clamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
Harrison Machine & Plastic Corporation HARRISON SUPERDUCT FUME EXHAUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG
Harrison Machine & Plastic Corporation HRRISON SUPERDUCT FUME EXHUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 01-01-2018 1 HRRISON SUPERDUCT PVC DUCT PIPE Part No. Size O.D.
Coupling Dimensions Bolts Max. End. Allow Pipe Outside. Load Size Dia. End Sep. A B C No. Size x Length kg
OUPLINGS Style Reducing oupling Features Reducing oupling provides direct reduction on the pipingrun, without any accesories onsists of reducing gaskets and a steel washer which prevents entry of the smaller
90 Elbows Long Radius
90 Elbows Long Radius DN O.D. Center SCH STD SCH XS SCH XXS SCH 10 SCH 20 SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160 Inch mm to End Thickness Weight Thickness Weight Thickness Weight Thickness
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
FORGE & FITTING. Subject : Registration of our firm in your approved list of vendors
Respect Customer, Dear Madam / Sir, Subject : Registration of our firm in your approved list of vendors SAGAR is a metal supplier of industrial metal products including stainless steel, carbon steel, nickel,
Caliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 8 I. DIMENSION 1. PLAIN PLUG / WIDTH/ DEPTH / Upto 100 mm 2.0 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ Above 100 to 300 mm 3.0 µm Comparator with Stand
Features: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
SPIRAL G.P. GASKETS. Wound Gaskets. Leader in Gasket Provider
SPIRAL Wound Gaskets Overview G.P.Gaskets is offering a full range of Spiral Wound Gaskets. The objective is to make available in India, Spiral Wound Gaskets manufactured to the most exacting international
How to Apply the Work Activity Method of Labor Calculations
How to Apply the Work Activity Method of Labor Calculations the Latest Update to MCAA s WebLEM Ron King WebLEM Committee Members Kevin Daubendiek Humphrey Company, Houston, TX Paul DeBella DeBella Mechanical,
MULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES
MULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES Industry puts Maurey sheaves on more drives every year simply because
manifold design database Do more
MDTools Library Manager 2016 manifold design database Do more VEST, Inc. 3250 W, Big Beaver Road, Suite 440, Troy, MI 48084 USA Call: +1 248 649 9550 Email: sales@vestsa.com Visit: www.vestusa.com VEST,
PSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD
PSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD ALL SPLIT VERSIONS OF OUR STANDARD COMPAKT SEALS ARE FOLDABLE WWW.PSI-PRODUCTS.COM
Clamps with RUBBER BUSHING
Clamps with RUER USHING Order Codes p 34 Dimensions p 34 CLAMPS WITH RUER USHING Mounting example p 37 STANDARD SERIES CLAMPS WITH RUER USHING Order Codes PIPE CLAMPS AND RUER USHING MATERIAL (two clamp
PHONE / FAX
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / FAX 949.713.4884 CONTENTS MICROSTOP UNITS PG 1-4 OFFSET ANGLE DRILLING HEADS COLLET CHUCKS PG
Fits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
Excel Calibration Private Limited, No. 101, Legend Constructions, No /101, Barkathpura, Hyderabad, Telangana
Last Amended on 10.03.2016 Page 1 of 5 I. DINENSION 1. GAUGE BLOCKS $ (Grade 0, I & II) 0.5 mm to 10 mm 0.4 µm Using Gauge Block 10 mm to 25 mm 0.6 µm Comparator & Slip Gauges 25 mm to 50 mm 0.7 µm 50
Inventor 201. Work Planes, Features & Constraints: Advanced part features and constraints
Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the
Type TW.FL / TW10 Flanged, TW.TH / TW15 Threaded, TW.SW / TW20 Socket Weld, TW.WI / TW25 Weld-in, TW.SC / TW30 Sanitary
Mechanical Temperature > Thermowells > Flanged, Threaded, Socket Weld, Weld-in, Sanitary Type TW.FL / TW10 Flanged, TW.TH / TW15 Threaded, TW.SW / TW20 Socket Weld, TW.WI / TW25 Weld-in, TW.SC / TW30 Sanitary
T E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
BLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
Micro-Flat Datums Pvt. Ltd., Plot No , Zone D-3, GIDC, Vitthal Udyognagar, Anand, Gujarat
Last Amended on 03.12.2015 Page 1 of 9 I. DIMENSION 1. CALIPERS $ L.C.: 0.01 mm Φ L.C.: 0.02 mm Φ 0 to 600 mm 0 to 1000 mm 0 to 2000 mm 9.37 µm 9.25 µm 14.64 µm Using Slip Gauge Set, Caliper Checker, Master
Discipline Mechanical Calibration Issue Date Certificate Number C-0131 Valid Until Last Amended on - Page 1 of 10
Last Amended on - Page 1 of 10 I. DIMENSION 1. Angle Protractor Combination Set $ 0 to 180 35 min Using Angle Blocks, Sine Bar, Slip Gauges & Surface Plate by Comparison Method as per IS 4239 2. Bevel
Input Echo, Nozzle Item 1, Description: Design Internal Pressure ( Case 1 ) P psig Temperature for Internal Pressure TEMP 250.
1 Input Echo, Nozzle Item 1, Description: Design Internal Pressure ( Case 1 ) P 125.00 psig Temperature for Internal Pressure TEMP 250.00 F Include Hydrostatic Head Components NO Shell or Head Material
Discipline Mechanical Calibration Issue Date Certificate Number C-0386 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. CALIPER $ (Vernier / Dial / Digital) L. C. 10µm Φ Up to 600 mm >600 mm to 1000 mm 14.0 µm 19.0 µm Using Gauge Block Set, Caliper Checker, Length Bar & External
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
ENGINEERED SOLUTIONS FOR HIGH PRESSURE CONTAINMENT. Wireloctm. dimensional data
ENGINEERED SOLUTIONS FOR HIGH PRESSURE CONTAINMENT Wireloctm dimensional data ENGINEERED SOLUTIONS CONTENTS THE NExT GENERATION 1 SEAL RINGS 2 butt weld HUbS 3 5 blinds 6 8 CLAMP SET 9 CROSS REFERENCE
Split Frame Clamshells and Accessories
Split Frame Clamshells and Accessories Sever and Machine Pipes From.625" to 86" (15.9 mm to 2184.4 mm) Rigid And Easy To Handle - Aluminum Body Gives Highest Strength-To- Weight Ratio And Our Exclusive
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
Autodesk Inventor 6 Essentials Instructor Guide Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the follow
Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the following topics and provides exercises for students to practice their skills. Day Two Topic: How to create
D-2000 Quick Opening Closures
D-2000 Quick Opening Closures s: 4-inch and larger Bulletin No: 50.003.04 Version:.2017 Cross Indexing No: n/a Supercedes: 50.003.03 (01.20) Options Description T.D. Williamson, Inc. s Clamp Ring Closures
DIRECT BURIAL RESIDENTIAL POSTS
POSTS & ACCESSORIES DIRECT BURIAL RESIDENTIAL POSTS Fits Most Standard 3" Post Top Fixtures Textured Powdercoated Aluminum Crossarm Included Unless Otherwise Specified Includes Inlet Hole Made In The USA
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
Rosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
CLAMSHELL PIPE CUTTING AND BEVELLING MACHINES. Mactech Europe LTD
CLAMSHELL PIPE CUTTING AND BEVELLING MACHINES Mactech Europe LTD Mactech s Clamshell lathes are portable pipe cutting machines designed for on-site precision severing, severing/beveling, and severing/double
Poly Slide, 40" Sheet 1 of 3
14125200 5 1 / 4 "/133 13 1 / 2 " 343 5 1 / 4 "/133 6'/1829 Minimum Use Zone PLAN VIEW/ FOOTING LAYOUT 26" 660 40" 24" 610 Right Side Frame 72 5 / 8 " 1845 See Dim. "A" 5 1 / 2 "/ 140 Left Side Frame Typical
Stock HTS Sprockets. HTS Sprockets. HTS High Torque Sprockets. Features of HTS Drives
HTS Sprockets Features of HTS Drives Positive Slip Proof Engagement Wide Speed Range Constant Driven Speeds Wide Range of Load Capabilities No Lubrication High Tension Eliminated High Mechanical Efficiency
BTL. Taper bushing A. PLATE SPROCKET REBORE TO "G"DIMENSION. WELD TAPER WELD. ON HUB TAPER SPROCKET
is a new type of component used for joining mechanical transmission. It changed from the traditional design and now features easy-on, easy-off construction and high standardization. The grip is tightened
CH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
Index. E Expanded Metal Raised Flattened Grating... 93
Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...
BUS CONNECTORS. Standard & EHV to 765 KV
BUS CONNECTORS Standard & EHV to 765 KV dmcpower.com 888-swage-now BUS CONNECTOR SYSTEM Faster, More Reliable Bus Installations If installation speed, quality, safety and total project cost is important
Inventor What s New
Inventor 2009 - First and Last Name Presenter s Title 2008 Autodesk 1 Simulation Perform more advanced analysis with less setup time Parametric Gear Joints Reference Frames Spatial Joint 3D Contact Enhancement
VERO UK TRAINING MATERIAL. 2D CAM Training
VERO UK TRAINING MATERIAL 2D CAM Training Vcamtech Co., Ltd 1 INTRODUCTION During this exercise, it is assumed that the user has a basic knowledge of the VISI-Series software. OBJECTIVE This tutorial has
Rosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before
Inch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
CRL AWS - ALUMINUM WINDSCREEN SYSTEM TYPICAL PLANS & ELEVATIONS - RECTANGULAR POSTS
CRL AWS - ALUMINUM WINDSCREEN S & S - POSTS Revisions By: SURFACE APPLIED TOP CAP 7 (888 mm) SQ FT MAX PANEL SIZE FOR 8" (MAX 7) x ALUMINUM ATTACHMENT WILL DEPEND ON MOUNTING AND INSTALLATION LOCATION
Section C75-FA-5. Firewall Assembly
Section C75-FA-5 This manual has been prepared for assembly of the firewall supplied with match drilled parts. This photo assembly manual is intended as a supplement to the drawings. If there is any discrepancy
Product Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r
Product Bulletin BPS-00 C l a m p P i p e C o n n e c t o r Table of Contents BlueSky Clamp Connector... Industrial Applications... Clamp Connector Description... How the Metal to Metal Seal Works... Design
Wrot and Cast Pressure Fittings
Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters................................................ 6-8 Air Chambers............................................. 8 Bulkhead Fittings..........................................
Kully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
Inspection Management System (IMS) A Welding NDE Management Program for Fabricated Piping Systems
Inspection Management System (IMS) A Welding NDE Management Program for Fabricated Piping Systems General Information Overview IMS is a comprehensive software program for managing welding and non-destructive
Creating a 2D Geometry Model
Creating a 2D Geometry Model This section describes how to build a 2D cross section of a heat sink and introduces 2D geometry operations in COMSOL. At this time, you do not model the physics that describe
Common grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile. Size Weight (lbs.) Weight (lbs.)
Bar Size Angle Common grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile Size Weight (lbs.) Weight (lbs.) A B C per Foot per 20' 1/2 x 1/2 x 1/8 0.38 7.6 5/8 x 5/8 x 1/8 0.48 9.6 3/4 x 3/4 x 1/8
Calibration House, 71, Tarani Colony, Near Amir Vila, A. B. Road, Dewas, Madhya Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 8 I. DIMENSION 1. Calipers (Vernier/Dial/Digital) $ L.C.: 5 μm Φ 0 to 1000 mm 13.0 µm Using Caliper Checker, Gauge Block & Length Bar 2. Height Gauges $ (Vernier/Dial/Digital)
Spec Setup Part One. Fig 2 - Select Job/Spec Setup from the "Edit" menu in order to add a Specification to the current job.
Spec Setup Part One Fig 1 Typical AcornPipe Drawing Fig 2 - Select Job/Spec Setup from the "Edit" menu in order to add a Specification to the current job. Fig 3 - The Job/Spec Setup screeen opens. Fig
UC th Users Conference on BiAxial Fatigue Testing November 11 th, 2015
UC 12 12 th Users Conference on BiAxial Fatigue Testing November 11 th, 2015 UC 12-2015-11-11 Robert Keplin M.Sc. Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF www.lbf.fraunhofer.de
User Manual TEMES Version 7.xx Advanced Services GmbH Hoher Steg Lauffen/N.
TEMES Version 7.xx Advanced Services GmbH Hoher Steg 13 74348 Lauffen/N. www.amtec.eu January 2014 table of contents Page 2 1 Introduction... 4 2 Installing the software TEMES fl.cal... 4 2.1 Software
High Purity Laboratory Faucets
High Purity Laboratory Faucets GNF 0 GNF 0 5 /4 5 /4 /2 /2 2 /8 2 /8 Welded ssembly Deck mounted Laboratory Faucet with integral vacuum breaker manufactured Polypropylene per STM D 40 PVDF per STM D 222.
Spears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings
Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all
Ductile Iron Flanged Fittings DIA. OF BOLT CIRCLE FLANGE THICKNESS 2" " "
-27 NOM. PIPE FLNGE O.D. DI. OF OLT CIRCLE JOINT DIMENSIONs (in inches) FLNGE THICKNESS OLT HOLE DIMETER NO. OF OLTS OLT DI. & LENGTH O.D..C. T 2" 6.00 4.75.62.750 4 5 8 2 1 4 3" 7.50 6.00.75.750 4 5 8
JUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
DN100 (4") - DN500 (20") Hot Tappings
DN00 (4") - DN500 (20") Hot Tappings TONISCO B40 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN00 DN500 by completing it with proper adapters.
TRAINING GUIDE MILL-LESSON-FBM-1 FBM MILL AND FBM DRILL
TRAINING GUIDE MILL-LESSON-FBM-1 FBM MILL AND FBM DRILL Mastercam Training Guide Objectives Previously in Mill-Lesson-6 and Mill-Lesson-7 geometry was created and machined using standard Mastercam methods.
Aerospace Sheet Metal Design
CATIA V5 Training Foils Aerospace Sheet Metal Design Version 5 Release 19 January 2009 EDU_CAT_EN_ASL_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able
Finite Element Analysis of Gate Valve
K.H.Jatkar 1 and Sunil S. Dhanwe 2 1 Professor, 2 M.E. Scholar, (Mechanical-Design Engg.) Walchand Institute of Technology, Solapur - 413 006, Maharashtra Email: Id-sunil_dhanwe@yahoo.co.in, jatkar@rediffmail.com
American Petroleum Institute Purchasing Guidelines Purchase API Spec 6A online at
API Specification 6A ISO 10423:2009 (Modified), Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment 20th Edition, October 2010 Specification for
Kamprath interaktiv CD- ROM. Hans-Jürgen Bullack. Pipe Elements. Calculation modules according to EN :2002/2005
PC CD- ROM Kamprath interaktiv Hans-Jürgen Bullack Pipe Elements Calculation modules according to EN 13480-3:2002/2005 Hans-Jürgen Bullack Pipe Elements Rohrleitungsbauteile Calculation modules according
4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
3D Finite Element Software for Cracks. Version 3.2. Benchmarks and Validation
3D Finite Element Software for Cracks Version 3.2 Benchmarks and Validation October 217 1965 57 th Court North, Suite 1 Boulder, CO 831 Main: (33) 415-1475 www.questintegrity.com http://www.questintegrity.com/software-products/feacrack
QUALITY PRODUCTS, COMPETITIVE PRICING AND SERVICE BEYOND YOUR EXPECTATIONS Phone (408) Fax (408)
Product Overview Vacuum Components & Bellows Pages 2-6 SSL NW/KF components are a system of stainless steel vacuum flanges for tube sizes from 3/4" through 2" OD. These flanges can operate in high vacuum
Inventor 2011 Tutorials ilogic Vessel - Part 5 Skirt Development
CADD Management Solutions Inventor 2011 Tutorials ilogic Vessel - Part 5 Skirt Development Part 5 of the ilogic Vessel Tutorial covers the development of the vessel skirt. The objective will be to create
Information System BOHRIS. version: Program. Date:
BOHRIS web Wellbores Information System User Manual Program version: Date: 0.0.1 2017-10-06 TABLE OF CONTENTS 1 GENERAL INFORMATION... 4 1.1 PROGRAM FUNCTIONS... 4 1.2 DATA STRUCTURE... 5 2 BOHRIS - ENTERING
Delta Dart. Socket. (L) on the Sketch toolbar. Fig. 1. (S) on the Sketch toolbar. on the Sketch toolbar. on the Standard Views toolbar.
Chapter 6 Delta Dart Socket A. Sketch. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. Step
Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
Optical Encoders. Sold & Serviced By: Toll Free Phone: Toll Free Fax:
SERVO-TEK SERVO-TEK PRODUCTS COMPANY, INC. Optical Encoders www.servotek.com Toll Free Phone: 877-378-0240 sales@servo2go.com RC-800 Summary Hollow Shaft Encoders ST50 Series High Performance Rotary Incremental
System 16 Precision-Clamping & Welding Bench
UKOP-2.04K16 System 16 Precision-Clamping & Welding Bench System 16 Contents System 16 S4 Welding bench Aluminium Plate with holes Bench legs Stops Squares Prisms Bolts Clamps Fast clamping 2-3 4-5 6-7
* 28" 2'-0" NUT ROUTED 6" x 8" WOOD BLOCK GROUND LINE SHEET APPROVED BY: DIRECTOR, BUREAU OF DEVELOPMENT DATE: VERT.
6'-" 2 3'- WITH WITH 6'-" 2 2'- EFFECTIVE AND TYPICAL 3'- WITH ROUND 6'-" 2 TOE NAIL BLOCK TO POST WITH A MINIMUM LONG HOT-DIP ZINC COATED NAIL x OFFSET BLOCK 3'- x LINE POST * 2 x LINE POST * 2 OPTIONAL
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
Surface Mount Multilayer Ceramic Chip Capacitors
Surface Mount Multilayer Ceramic Chip Capacitors Access hole at slot location (Ø 40 mm min.) W 3 Includes flange distortion at outer edge D Full radius W 2 (measured at hub) A C Arbor hole diameter N (hub
PRESSURE BLOWERS AF CAST ALUMINUM PRESSURE BLOWERS MANUFACTURERS OF HIGH EFFICIENCY FAN/ BLOWERS/ DUST COLLECTORS
M A N U F A C T U R I N G I M I T E D AF PRESSURE BOERS MANUFACTURERS OF HIGH EFFICIENCY FAN/ BOERS/ DUST COECTORS jtantay 0 Rowntree Dairy Road, oodbridge, ON Canada V Tel: 00 Fa: 0 Toll Free:.00.0. (Canada)..0.
060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
Contents. Page 2 TRCTFP101
Contents CHAINS SPZ-SPA-SPB-SPC Profile Selection 3 Taper Bore SPZ 4-7 Taper Bore SPA 8-10 Taper Bore SPB 11-14 Taper Bore SPC 15-17 Taper Bushes 18-19 Taper Bushes - Metric 20-23 Taper Bushes - Imperial
MIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
Mastercam to Mazatrol Post-Processor Tutorial
Mastercam to Mazatrol Post-Processor Tutorial Introduction The following tutorial instructs the user in the approach to programming that allows a Mastercam file with it s associated toolpaths to output
Rosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
Feature-based CAM software for mills, multi-tasking lathes and wire EDM. Getting Started
Feature-based CAM software for mills, multi-tasking lathes and wire EDM www.featurecam.com Getting Started FeatureCAM 2015 R3 Getting Started FeatureCAM Copyright 1995-2015 Delcam Ltd. All rights reserved.
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53