Steel Flanges. Blind Flange. Plain Flange DN PN 10 EN (ISO , DIN 2501)

Transcription

1 Steel s Plain Blind N PN 6-0 EN 09-(ISO 0-, IN 0) Pipe PN 6 PN 0 Size outside pipe iameter iameter N d d d d d / مشخصات برای سایزهای باالتر بر حسب در خواست مشتری اعالم می گردد. سایر استانداردهای قابل ساخت: ANSI, AWWA, ISO, IN

2 Steel s Plain Blind N 0-00 PN - EN 09-(ISO 0-, IN 0) Pipe PN PN Size outside pipe iameter iameter N d d d d d مشخصات برای سایزهای باالتر بر حسب در خواست مشتری اعالم می گردد. سایر استانداردهای قابل ساخت: ANSI, AWWA, ISO, IN

3 Steel s Plain Blind N 0-00 PN EN 09-(ISO 0-, IN 0) Pipe PN 0 PN 6 PN 00 Size outside pipe iameter iameter N d d d d مشخصات برای سایزهای باالتر بر حسب در خواست مشتری اعالم می گردد. سایر استاندار دهای قابل ساخت: ANSI, AWWA, ISO, IN

4 Steel s d N d d d d Neck Slip-On N PN 0- EN 09-(ISO 0-, IN 0) Pipe outside Size pipe N d PN 0 iameter d / d N PN iameter d مشخصات برای سایزهای باالتر بر حسب در خواست مشتری اعالم می گردد. سایر استانداردهای قابل ساخت: ANSI, AWWA, ISO, IN d N

5 Steel s d N d d d d Neck Slip-On N 0-00 PN - EN 09-(ISO 0-, IN 0) Pipe PN PN 0 Size outside pipe iameter iameter N d d d N d d N مشخصات برای سایزهای باالتر بر حسب در خواست مشتری اعالم می گردد. سایر استانداردهای قابل ساخت: ANSI, AWWA, ISO, IN

6 ANSI B. FORGE FLANGES (CLASS 0) SLIP-ON WELING NEC SOCET WELING BORE LENGTH THRU HUB Nominal Pipe Size Outside iam. O.. Face iam. at Base Hub Thickness Neck Slip-on Lap Neck Slip-on Threaded Lap iam. Hub at Bevel Radius Fillet Thread G X t B B B T T T A R Q / / / / / / Notes: Class 0 langes except Lap will be urnished with 0.06,, (.6mm) raised which is included in, Thickness, (t) and, through Hub, (T),(T). For Slip-on, Threaded, and Lap s, the hubs can be shaped ether vertical rom base to top or tapered within the limits 7 degrees.

7 ANSI B. FORGE FLANGES (CLASS 0) THREAE LAP JOINT BLIN Nominal Pipe Size / epth Y 9.7 Bolt Circle iam 60. RILLING Number iam..7 iam. Bolt (inch) / BOLTING Machine Bolt Face 0. Stud Bolt Face 7. Ring _ g 0. Neck.0 Slip-on and Threaded g APPROXIMATE WEIGHT g 0. Lap.00 g 0.7 Blind.00 g /..7 / _ / / / / / / / / / / / / / / / / / / / / The gasket sur and backside(bearing sur or bolting) are made parellel within degree. To accomplish parallelish, spot acing is carried out according to MSS SP-9, without reducing thickness(t) epth (Y) is covered by ANSI B. only in size through inch is at the manuacturer, s option.

8 ANSI B. FORGE FLANGES (CLASS 00) Nominal Pipe Size / epth Y 9.7 THREAE Bolt Circle iam. 66. RILLING Number iam..7 iam. Bolt (inch) / BOLTING Machine Bolt Face 7. Stud Bolt Face 6. LAP JOINT Ring 76. g 0.7 Neck. Slip-on and Threaded g APPROXIMATE WEIGHT g 0.6 Lap BLIN.0 g 0.6 Blind.0 g / / / / / /.7.. / / / / / / / / / / 7 / / / / / / / () Blind s may be made with the same hub as that used or Slip-on s or without hub. () The gasket sur and backside(bearing sur or bolting) are made parellel within degree. To accomplish parallelism, spot acing is carried out according to MSS SP-9, without reducing thickness(t) (6) epth (Y) is covered by ANSI B. only in sizes through inch is at the manuacturer, s option.

9 ANSI B. FORGE FLANGES (CLASS 00) SLIP-ON WELING NEC SOCET WELING BORE LENGTH THRU HUB Nominal Pipe Size Outside iam. iam at Base Hub O.. Face Thickness Neck Slip-on Lap Countor Bore Min. Threaded Min. Neck Slip-on Threaded Lap iam. Hub at Bevel Radius Fillet Thread X G t B B B B T T T A R Q / / / / / / Notes: () For Slip-on, Threaded, and Lap s, the hubs can be shaped ether vertical rom base to top or tapered within the limits 7 degrees. مشخصات برای سایزهای باالتر بر حسب در خواست اعالم می گردد.

10 imensional Tolerances EN 09-:00 (ISO 0-) ANSI B. EN 09-:00(ISO 0-) Plain lange and Blind lange > N 0 outside < N 0 < N 00 < N 00 < N 00 )( < N 00 < N 00 < N 00 Facing Facing height iameter bolt (k) > N 0 < N 00 For all size minimum bolt size M0 to M bolt size M7 to M bolt size M6 to M bolt size M6 to M > 0 iameter 0 < (+0.0 t) thickness(t) center to center adjacent bolt hole bolt size < M bolt size M7 to M bolt size > M ANSI B. outside Inside iameter contact iameter Haub at bass iameter Hub at point welding rilling Thickness thru hub unit: inch Neck and Blank When O. is +/,, (.6mm),, or Less When O. is +/,, (.mm) over 0,, and smaller +/,, (0.mm),, thru,, +/,, (.6mm) 0,, and Larger +/,, (.mm) /,, Reised +/,, (0.mm) /,, Reised Tongue & +/6,, Groove (0.mm) Male, Female when Hub base is,, or smaller when Hub base is over,,,, and smaller 6,, and larger Bolt Bolt hole spacing Eccentricity Bolt with respect to acing Eccentricity Bolt with Eccentricity acing with respeat to Bore,, and smaller 0,, and larger 0,, and smaller,, and larger +/,, (.6mm) +/,, (.mm) +/,, (.mm) -/,, (0.mm) +/,, (.0mm) -/,, (0.mm) +/,, (.6mm) +/,, (0.mm) /,, & smaller /,, (0.mm)max,, &Larger /,, (.6mm)max /,, (0.mm)max /,, (0.mm)max +/,, (.mm) 0 +/,, (.mm) 0 +/,, (.6mm) +/,, (.mm)

11 Sealing or s with Plain Contact Sur N 0-N 00 PN 6-PN 0 واشر الستیکی منجید دار مناسب برای فشار کاری 6 تا 0 بار EN- (IN 690) Nominal Width 6 Nominal Pressure(PN)

12 Hexagon Head Screws and Nut IN-EN 0 IN-EN 0 IN 9-9 No. N mm Inch Qty. PN6 Size PN0 Qty. Size PN Qty. Size PN Qty. Size PN0 Qty. Size ,,,, /,,,,,, 6,,,, 0,,,,,,,,,, 0,,,,,,,, 6,, 0,,,,,, 6,, 6,, 7,, 0,, M M M 0 M 0 M 0 M 0 M 0 M 0 M0 90 M0 90 M0 90 M0 90 M0 90 M 0 M 0 M7 0 M7 0 M7 0 M0 0 M0 0 M 0 M 0 M6 0 M M 0 M 0 M 0 M 0 M 0 M0 90 M0 90 M0 90 M0 90 M0 90 M 0 M 0 M 0 M7 0 M7 0 M0 0 M0 0 M 0 M 0 M6 0 M9 0 M 90 M 90 M M 0 M 0 M 0 M 0 M 0 M0 90 M0 90 M 0 M 0 M 0 M7 0 M7 0 M0 0 M 0 M 0 M6 0 M6 0 M9 0 M9 0 M 90 M 90 M 0 M 0 M M 0 M 0 M 0 M0 90 M 90 M 0 M 0 M7 0 M7 0 M0 0 M 0 M 0 M 0 M6 0 M9 0 M 90 M 90 M 0 M 0 M 0 M6 M6 M6 00 M M 0 M 0 M 0 M0 90 M 0 M 0 M7 0 M0 0 M0 0 M 0 M6 0 M6 0 M9 0 M 90 M 90 M 0 M 0 M 0 M M6 M6 00