Shaft: Ø 10 mm or Ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
|
|
- Francis Barton
- 5 years ago
- Views:
Transcription
1 Explosion Proof / Absolute Type EXAG - SSI Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm or Ø 12 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits Removable End Cap for on-site modifications ATEX, IECEx, certified Electrical Specifications Code: Interface: Resolution: Transfer Distance: Clock Input: Data Output: Clock Frequency: Accuracy of Division: Cycle Time: Turn On Time: Supply Voltage: Power Consumption: Electrical Protection: Noise Immunity: Absolute Binary or Gray Code Synchronous Serial (SSI) Driver meets EIA standard RS422 Option: Strobe Function allows connection of up to 10 encoders on one data line Max. 14 bit (16384) revolutions Max. 16 bit (65536) steps per rev. Up to 1200 m (3937 ft) RS422 compatible via optocoupler Line Driver RS khz to 2MHz +/- ½ LSB (12 bit) +/- 2 LSB (16 bit) < 25 μs < 1 s 4.5 to 30 VDC (Absolute limits) According to EN Max. 1,5 watts Reverse polarity and over-voltagepeak protection EN :2005 Emitted Interference: EN : Mechanical Specifications Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Rotor Mass Moment of Inertia: Shaft Loads: Shock: Vibration: Bump: Environmental Specifications Operating Temp.: Storage Temp.: Humidity: Enclosure Rating: Housing: Aluminum or Stainless Steel Cap: Aluminum or Stainless Steel Shaft: Stainless Steel Aluminum: ~ 1600 gr (56,44 oz) Stainless Steel: ~ 3100 gr (109,35 oz) > 1,9 x revolutions at rated load rpm (max.) IP rpm (max.) IP 65, IP 66, IP 67 0,01 Nm at 25 C (no seal) 0,03 Nm at 25 C (with seal) 50 gcm² (7,08 x 10-4 oz-in-sec²) Axial: Radial: 100 G / 11 ms -40 to +70 C -40 to +70 C 60 N (13,50 lbs) max. 80 N (17,98 lbs) max Hz / 10 G 10 G / 16 ms (1000 x 3 axis) 98 % RH without condensation IP 64 / Nema 4 (approx.) IP 65 / Nema 5 (approx.) IP 66 / Nema 6 (approx.) IP 67 / Nema 6 (approx.) IP 68* / Nema 6P (approx.) * Facemount Q only Rev November Scancon Huginsvej Hillerød Denmark p. 1
2 Certifications ATEX: IECEx: EAC: Certificate No.: ITS09ATEX16867X II 2 G Ex db IIC T5 Gb II 2 D Ex tb IIIC T100 C Db -40 C Ta +70 C Certificate No.: IECEx ITS X Ex db IIC T5 Gb, Ex tb IIIC T100 C Db -40 C Ta +70 C Certificate No.: RU No НАНИО «ЦСВЭ» No.TC RU C-DK.ГБ05.B Ex d IIC T5 Gb X, Ex tb IIIC T100 C Db X -40 C<T.amb<+70 C Interface Installation The rotary encoder is connected by one, two or three cables. This depends on whether the power supply is integrated into the main cable or connected separately. If the power supply is integrated into the main cable, the remaining cable glands can be fitted with a plug. Unused cable entries must be closed using an Ex d - proof blind plug (see Accessories). The cable gland options are suitable for cables ranging from Ø 6,5 mm to Ø 20,5 mm. Pin assignments for the 8-pin terminal block are shown below. The connection cap can easily be opened by removing the six screws in the cap. Rev November Scancon Huginsvej Hillerød Denmark p. 2
3 Interface Synchronous Serial Interface (SSI) Comment Driver Driver meets EIA standard RS 422; transmission rates up to 10 MBits/sec. Transfer Transfer distance up to 1200 m (3937 ft) Strobe Function (Optional) Allows for up to 10 absolute rotary encoders to use the same data line. Single Shift Taktsequenz Clock n n+1 Data t tp < 20µs tm1 > 20µs t< tm tm MSB LSB 0 MSB tp Rev November Scancon Huginsvej Hillerød Denmark p. 3
4 Face Mounts Face Mount C Clamping Flange Face Mount S Servo Flange 303 Stainless Steel (VA) option only Rev November Scancon Huginsvej Hillerød Denmark p. 4
5 Face Mount Q Square Flange End Caps with Cable Outlets Side Standard End Cap (FZ) Rev November Scancon Huginsvej Hillerød Denmark p. 5
6 Side Triple End Cap (FE) Plastic Screw Plugs are only for protection during shipping! They must be replaced by Ex d certified Cable Glands and/or Blind Plugs prior to use. 46 (1,81) 23 (0,905) (0,63) M 20 x1,5 6H 65 (2,56) 92 (3,62) EXAGN - 64 (2,52) Back Round End Cap (FG) Rev November Scancon Huginsvej Hillerød Denmark p. 6
7 Encoder Length Housing N (64 mm) Total Encoder Length Face Mount End Cap Clamping Flange C Servo Flange S Square Flange Q FZ 102 mm (4,02 in) 114 mm (4,49 in) 115,5 mm (4,55 in) FE 102 mm (4,02 in) 114 mm (4,49 in) 115,5 mm (4,55 in) FG 118 mm (4,65 in) 130 mm (5,12 in) 131,5 mm (5,18 in) End Cap + Face Mount + 64 mm = Total Encoder Length Rev November Scancon Huginsvej Hillerød Denmark p. 7
8 Ordering Code 316 Stainless Steel (SA) option only Example: EXAGN S101B A AL FZ C 00 Type EXAG N - S A Housing Interface Code Revolutions Steps Shaft Material Shaft IP Cable End Cap Face Accessory / Vers. per Dimensions Length with Mount SSI / 101 Rev. Cable Outlets IP Gray G IP Binary B IP mm length N See Encoder Length Table IP IP 68* 68 Single Turn 00 Multiturn 12 bits (4096) 12 Multiturn 14 bits (16384) 14 Standard Cable No cable bits (4096) ( ) bits (8192) ( ) bits (65536) ( ) 16 Aluminum AL Stainless Steel 303 AISI VA Stainless Steel 316 AISI SA Clamping flange C Synchro flange S Square VA/ SA option only Q Ø10 mm x 20 mm 2 flats, 8 mm length 01 Ø12 mm x 25 mm 2 flats, 8 mm length VA/SA option only 02 Ø10 mm x 20 mm 1 flat, 15 mm length 03 No accessory 00 Side Standard 2 outlets No cable FZ Side Triple 3 outlets No cable FE Back Round 2 outlets No cable FG Cable Glands may be ordered as separate items See Accessories for Cable Gland options * Available only with Facemount Q Rev November Scancon Huginsvej Hillerød Denmark p. 8
Type EXME - DeviceNet
Explosion Proof - Mining / Absolute Type EXME - DeviceNet Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm DeviceNet communication protocol Resolution up to 30 bits Removable End Cap for on-site modifications
More informationMaterial: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Encoder Description EXAG SSI / Hollow Shaft EXAG SSI Hollow Shaft Encoder - Ø 78 mm Hollow Bore: Ø 14 mm and Ø 16 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits for on-site
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - CANopen Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm CANopen communication profile according to DS 301; Programmable according to Class 2 Resolution up to
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX,
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Ethernet Non removable end cap delivered with cable Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Ethernet - TCP/IP and MODBUS TCP communication
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Rotor Mass Moment of Inertia: Shaft Loads:
EXAG Profibus /Shaft EXAG - Profibus Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX, IECEx, and
More informationType EXAG - Profibus. Explosion Proof / Absolute. Ex d - Proof Hollow Shaft Encoder - Ø 78 mm
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Encoder - Ø 78 mm Hollow Bore: Ø 14 mm, Ø 16 mm and Ø 1 inch Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site
More informationMaterial: Weight: Bearing Life: Hollow Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Encoder Description EXAG Profibus / Hollow Shaft EXAG Profibus Hollow Shaft Encoder - Ø 78 mm Hollow Bore: Ø 14 mm, Ø 16 mm and Ø 1 inch Profibus DPV2 Functionality Resolution up to 30 bits for on-site
More informationEXAG - Dual Output Profibus / Incremental
Explosion Proof Profibus / Incremental EXAG Dual Output Profibus / Incremental Electrical Specifications General Ex d Proof Shaft Encoder Shaft: Profibus DPV2 Functionality Absolute Resolution up to 30
More informationMaterial: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Profibus-DP
PROCESS FIELD BUS Main Features - Approval II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: - DPV2-Functionality - max. 65536 steps per revolution
More informationType SCA94DD. Wind Power / Direct Drive
Wind Power / Direct Drive Type SCA94DD Specifically made for measurement of Speed and Position on slow revolving Direct Drive Generators on Wind Turbines High Resolution of Speed and Position High Update
More informationEAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationAbsolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationPRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and Heavy-Duty Industrial Model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or Hub Shaft: 6 or
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationSCH108BEX. Technical Manual. Scancon Encoders Huginsvej Hillerød Denmark Tlf Fax
SCH108BEX Technical Manual 1 Introduction The SCH108BEX Encoder is an Ex-proof, Absolute Multiturn Encoder designed primarily for use in oilfield applications where reliability is critical, but can also
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
More informationHMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
More informationABSOLUTE ROTARY ENCODER MODBUS/TCP
Main Features - Compact and Heavy-Duty Industrial Model - Communication via Standard Protocols - Integrated Web Server - Interface: Modbus/TCP - Housing: 58 mm - Full shaft: 6 or 10 mm / Hub Shaft 15 mm
More informationABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationOptical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
More informationRotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
More informationRotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationAMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
More informationCurrent consumption... Multiturn: max.230ma with 10 V DC,max.100mA with 24 V DC
- Standard encoder 8mm with canopen/can interface - Precision ball bearings with sealing flange - Code disc made of unbreakable and durable plastic - High protection level IP6, IP67 option with a sealing
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationABSOLUTE ROTARY ENCODER INTERBUS LOOP2
Main Features - Compact and heavy duty industrial model - Interface: INTERBUS Loop2 (Local-Bus) - ENCOM-Profile: K (programmable) - Housing: 58 mm - Resolution: max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationRotary Measuring Technology
--20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationAbsolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationPOG 10 + DSL. Features
Features Freely programmable on and off switching speed Programming via included software (RS485 interface) TTL or HTL, EURO-flange and/or housing foot 3 / solid shaft ø11 mm DSL.R: 3 outputs speed controlled
More informationRotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationSSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS
GENERAL INFORMA SSI ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS In many cases, the data transmitted from one system to another are subjected to magnetic fields and noise, by using standard interfaces,
More informationRotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationMHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature
More informationDATA SHEET ABSOLUTE OPTICAL ROTARY ENCODER ETHERNET POWERLINK
Main Features - Compact Industrial Model - Communication via Ethernet Powerlink V2 - Interface: Ethernet - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm - Max. 65536 Steps per Revolution (16
More informationMHAP HDmag. Features
Features MHP 200 - Version for axial screw mounting bsolute encoder with magnetic sensing and without bearings with integrated FPG signal processing bsolute resolution max. 17 bit singleturn dditional
More informationSpeed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationEncoder WDGA 58B SSI.
Encoder WDGA 58B SSI www.wachendorff-automation.com/wdga58bssi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
More informationABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL
Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof Housing: 58 mm - Shaft: 6 or 10 mm hollow- 15 mm - Resolution: Max. 16 Bit = 65,56 Steps
More informationProduct Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
More informationTECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
More informationEncoder WDGA 36A SSI.
Encoder WDGA 36A SSI www.wachendorff-automation.com/wdga36assi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
More informationHD25A. Absolute Industrial Rugged Metal Optical Encoder Absolute Industrial Rugged Metal Optical Encoder, Page 1 of 5. Description.
Description HD25A, Page 1 of 5 The HD25A is a NEMA 25 sized absolute encoder designed for industrial applications. The HD25A optical encoder is a 12-bit absolute rotary position sensor, which reports a
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationSpeed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationEAM PARALLEL - SSI MULTITURN ABSOLUTE ENCODER
EAM PARALLEL - SSI MULTITURN ABSOLUTE ENCODER ABSOLUTE MULTITURN PARALLEL ENCODER DESCRIPTION This series is designed for application where a very high precision is required, even also on extended linear
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationENCODER. CANopen Multiturn. Series , Key-Features:
ENCOER CANopen Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Solid Shaft... Order Code Blind Hollow Shaft... Technical ata... CANopen Interface...5 Connection...6 Technical drawing...7
More information845G. Description. Features. Specifications
845G The 845G is a heavy duty NEMA Type 4 and 13 single turn absolute encoder that digitizes shaft position. The absolute encoder has a unique digital output for each shaft position. The use of absolute
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationAbsolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More informationENC-IQ58S-H-PROG-ZCW-4-06-A-L1
IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible
More informationTECHNICAL DATASHEET Absolute Motorfeedback Series AD 34
For brushless servo motors Light duty encoder Unique mounting concept: Save installation time and cost Mounting Depth: 25 mm (ST), 34 mm (MT) Up to 9 Bit ST - resolution + 2 Bit MT - resolution +20 C operating
More informationRotary Position Technology Absolute Encoders, Multiturn
-40 to 80 IP Bearing-ock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Reverse polarity protection Optical sensor Reliable Increased
More informationAbsolute encoders ATM60 SSI
ONLINE DATA SHEET www.mysick.com Absolute encoders ATM60 SSI ATM60-A4A12X12 Absolute encoders ATM60 SSI Model Name > ATM60-A4A12X12 Part No. > 1030001 At a glance Extremely rugged, tried-and-tested absolute
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationKINAX WT720 absolute, programmable angular postion transmitter
For industrial applications in rough environments KINAX WT720 is a robust, absolute angular position transmitter, which is particularly suited to applications in rough environments due to its unique capacitive
More informationAccessories. Measuring wheels Order designations. Measuring wheel with 20 cm circumference (small)
Accessories Measuring wheels s Measuring wheel with 20 cm circumference (small) 04 Bore 4 mm (Standard) 05 Bore 5 mm 06 Bore 6 mm 07 Bore 7 mm 10 Bore 10 mm Material, Surface MR211. A Aluminum, cross knurl
More information