MJTP SERIES 6MM & 4MM SMD TACT SWITCHES

SERIES TL 3200 SWITCHES

TACT 3200 TACT SMT, LED - 4.5mm x 6.8mm 30,000 cycles 500mΩ 100MΩ min. 160 +75/-30 grams Operating Temperature: -25 C to 85 C 0.25mm +0.2/-0.1mm Dual LED, SMT Design Ultra miniature design (only 4.5mm

AZ420 MINIATURE GENERAL PURPOSE RELAY

MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available

Distinctive Characteristics

Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular

Distinctive Characteristics

Ultra-Miniature SMT Slides Series SS3 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively indicates circuit

Top-actuated (B3U-1000 Series)

Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.

6mm 3VA DC Power Level or 0.4VA Logic Level Straight PC PCB Mount. 6mm SMT 3VA DC Power Level & 0.4VA Logic Level Gull Wing Terminals Upright Mount

Contents Tactiles C Series... mm Process Sealed m Low/Logic Level PC Mount C Series...8 mm SMT Process Sealed m Low/Logic Level Gull Wing Terminals Upright Mount HP Series... mm V DC Power Level or.v Logic

General Specifications

Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard

General Specifications

Series GT Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical

8 Series Pushbutton Switches

8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between

Technical Information Tactile Switches

Technical Information Cautions Use the Switch within the rated voltage and current ranges, otherwise the Switch may have a shortened life expectancy, radiate heat, or burn out. This particularly applies

PRODUCT SPECIFICATION

1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to

Distinctive Characteristics

Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively

16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever

Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,

PRODUCT SPECIFICATION

SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors

Product Code Type Operating Force Product Height and Push Plate Color. Travel Type Middle Push Travel Short Push Travel

4.7 mm 3.5 mm SMD Light Touch Switches Type: /EVQP9/EVQ3P2 Features External dimensions : 4.7 mm 3.5 mm, Height : Middle Push Travel 2.5 mm ShortPushTravel2.1mm,2.5mm High operating force and long operational

ULTRAMEC NEW SWITCH FAMILY

ULTRAMEC NEW SWITCH FAMILY ultramec TM ultramec C PANEL MOUNTED SWITCHES PCB MOUNTED SWITCHES JOYSTICKS SWITCH PANELS LED INDICATORS NEW SWITCH HIGHLY RELIABLE TACTILE SWITCH IP sealing.000.000 cycles

Distinctive Characteristics

Distinctive Characteristics Subminiature size (/ size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact

General Specifications

Series BB Process Sealed Subminiature Antistatic Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V)

MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:

MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316

SPRING - LOADED CONNECTORS

SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight

Desktop Profile 0.60 Inch Keyswitches

Page 1 of 6 MX Series Desktop Profile 0.60 Inch Keyswitches Back to Main Products Page Snap-Action Switch News Find a Rep / Distributor Request Quotation Ask a Question Application Help Request a Sample

USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &

INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available

PGA / BGA / PLCC SOCKETS

PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169

General Specifications

Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical

D2SW-3L1HS D2SW-01L1HS

Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 3.0, BMI Wire-to-Wire BMI Connector System Americas Headquarters isle, Illinois

General Specifications

eries J0 & J0 Ultra-Miniature lide & Piano DIP General pecifications Electrical Capacity (Resistive Load) witching Rating: ma @ V DC Nonswitching Rating: 0.A @ 0V DC Other Ratings Contact Resistance: Insulation

Distinctive Characteristics

Low Profile Process Sealed Tactiles Series J Distinctive Characteristics Special bracket for right angle mounting provides added design variations. igher operating force type provides more pronounced operating

General Specifications

Series F Ultra-Thin Process Sealed Tactiles General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength:

Distinctive Characteristics

Distinctive Characteristics Top or side actuation permits fl exible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively

Features Sealed Construction for Automatic Soldering. Contact form. Operating Force SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO

B3W Features Sealed Construction for Automatic Soldering Available in two sizes: 6x6mm (1) and 12x12mm square (4) Ideal for applications such as audio, office and communications equipment, measuring instruments,

USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &

INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available

USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &

INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available

General Specifications

Series M Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC or A @ 50V AC; 4A @ 0V DC (On-On circuit) & A

DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability

BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end

MULTI ROTARY SWITCH MR50

MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged

SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept

Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.

General Specifications

General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal

Solder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H

Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable

Contents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC

Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,

Distinctive Characteristics

Distinctive Characteristics vailable in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design

SPECIFICATION MARCH MULTI MEDIA MEMORY CARD CONNECTOR. Kingfont Precision Ind. Co., Ltd. 17 FL-3, NO. 738, CHUNG CHENG ROAD.

SPECIFICATION SPEC. NO. SP0A24 REV B DATE MARCH-26-2004 PRODUCT NAME PRODUCT NO MULTI MEDIA MEMORY CARD CONNECTOR SDCMF-X07XXW1XX Kingfont Precision Ind. Co., Ltd. 738 17 3 17 FL-3, NO. 738, CHUNG CHENG

ULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES

FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,

General Specifications

Series M2 Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks eneral Specifications Electrical

Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10

http://www.shinmei-e.co.jp Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10 [] Features Flux-resistant construction with integrally molded s. 4 variations with

RTE02 and RTE03 Miniature Rotary Switches

RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions

Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB

Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to

RJHS Series. RJ vistatm. EMI Quiet Modular Jacks with LED s. Specifications. Ordering Information EMI QUIET - WITH LEDS

EMI Quiet Modular Jacks with LED s is a family of EMI Quiet Modular Jack Connectors with built-in LEDs, meets Ethernet CAT 5 performance. This product is ideal for LAN applications such as adapter cards

ULTRAMEC NEW SWITCH FAMILY

ULTRAMEC NEW SWITCH FAMILY ultramec TM ultramec C PANEL MOUNTED SWITCHES PCB MOUNTED SWITCHES JOYSTICKS SWITCH PANELS LED INDICATORS NEW SWITCH HIGHLY RELIABLE TACTILE SWITCH IP sealing.000.000 cycles

onlinecomponents.com

Short-Travel Switch MICON 5 SMT standard version SMT low version THT standard version Order no. Terminals Height [mm] Operating Force F1 [N] (+- 20% ) Switching Travel S2 [mm] (+- 0.15 mm) Operating life

2 POLES - 2 A (Slim Profile Signal Relay)

FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum

Distinctive Characteristics

Tilt Switch Series DS Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10 of the horizontal.

General Specifications

Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over

Customer P/N: UDE P/N: RUK-ZZ Description:

To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB stack Through Hole 10/100/1000 Base-T Contact Area : 30μ'' min. Gold LED: L-Green/Orange;R-Yellow Spec No. RUK17006-00 Update Date 2017/6/7

2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving

FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,

COMPACT POWER RELAY. FTR-P3 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES

FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 25A (for automotive applications) FTR-P3 Series FEATURES Compact for high density packaging High contact capacity with proven contact material. (100,000 operations,

Operating Force. Snap action/push-on type SPST. 10 ms max. (ON, OFF) 1.0 N, 1.6 N, 2.4 N, 3.5 N, 5.0 N, 7.0 N 0.15 mm±0.1 mm

3.5 mm 2.9 mm SMD Light Touch Switches Type: Features External dimensions : 3.5 mm 2.9 mm, Height 1.7 mm High operating force available (Operatingforce:7.0Nmax.) Optional ground terminal Recommended Applications

PAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _

PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY

Distinctive Characteristics

Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits

Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.

Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)

NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X

General Specifications

Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV

DIP Product Selection Guide

DIP Product Selection Guide H DIP DIP Series TDP TDA SDA SD D PA TDD SPA RTE CD CRD Switch Type Half-pitch Half-pitch Low Low Standard Side Jumper Single Rotary 8 mm 0 mm.050.050 Profile Profile Profile

QUICKIE SHROUDED HEADERS LOW PROFILE

BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle

Process Sealed Rotaries

New Product N-0 NR0 Series Process Sealed Rotaries Subminiature Rotaries with Positive, Distinctive Detent 07-07-7 Series NR0 Subminiature Process Sealed Rotaries General Specifications Electrical apacity

Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch

Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a

RTE Series Low Profile Rotary DIP Switches

Features/Benefits Thru-hole and surface ount odels Miniature size with robust stainless steel cover Rotary SPDT, SP3T, SPT functions Rotary binary-decial and hexadecial coding RoS copliant Typical Applications

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors

NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1

USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS

introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety

SPRING-LOADED CONNECTORS PAD CONNECTORS

SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional

SD Memory Card Connectors

SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

Type. Overstroke travel. Short push travel. Type Heigh Packing

6 mm Square Thin Type SMD Light Touch Switches 6mm Square Middle Travel SMD Light Touch Switch Type: EVQP0 EVPF Features External dimensions : 6.5 mm mm, Height 1.8 mm (Excluding the push plate) External

Series 47A: Miniature Rocker and Paddle Switches

SERIES 7A Miniature and Paddle Switches FEATURES Save Space and Weight,, PDT and PDT Circuitry Choice of Actuators and Terminations UL Recoginized DIP Switches S In inches (and millimeters) SP SP SP SP

ModularJacks. Amphenol

ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities

Series 47A: Miniature Rocker and Paddle

Series 47A: Miniature Rocker and Paddle SERIES 47A Miniature Rocker and Paddle Switches FEATURES Save Space and Weight,, PDT and 4PDT Circuitry Choice of Actuators and Terminations UL Recoginized S in

Distinctive Characteristics

Distinctive Characteristics Low Profile Pushbuttons Series UB Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square

Switches and Indicators 84

Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories

General Specifications

Series Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity

Amphenol Amphenol Taiwan Corporation Sheet 1 of 9

Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN

SERIES 16, 26 & 18 MICROSWITCH

SERIES 16, 26 & 18 MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals for superior electrical contact Choice of

PRODUCT SPECIFICATION

1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND

Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series

Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector

Film Chip Capacitors. PPS DIELECTRIC CB Series GENERAL DESCRIPTION ADVANTAGES APPLICATIONS PERFORMANCE CHARACTERISTICS

APPLICATIONS General purpose function in low voltage applications: Filtering, coupling, decoupling Time-constant Oscillation timing circuit Typical applications would be: Automotive (navigation system...)

Without Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating

LAN Modular Jack Connectors XM9B Compact LAN Modular Jack Connectors Category 5e transmission performance met for 1, 2-3, 6 pairs. (Verified with connection to Omron XS5W-T421.) Models available with and

RACON short-travel keyswitches

General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available

PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM

1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)

PRODUCT SPECIFICATION

1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to

Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121

Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.

ModularJacks. Amphenol

ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities

D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.

Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European

30,0 (1,181) 28,0 (1,102) 34,1 (1,343)

6,6 (0,65) 9,7 (0,8) 9,0±0, 0,5 ±0,008,6 (0,96) 0,6 (0,7) 6,6 (0,65) 6,6 (0,65),5 (0,78),85 (0,67) 8, (0,9) 9,7 (0,8) 9,7 (0,8),75 (0,8),85 (0,9),5 (0,78) 9,0±0, 0,5 ±0,008 9,0±0, 0,5 ±0,008 MEC-ROCKERMEC-7-08

Special-purpose Basic Switch

Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different

RH1-ZZ Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange

To: Customer P/N: UDE P/N: Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange Spec No. RH116037-00 Update Date 2016/11/1 Revision A Approved

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8

SPECIFICATION DIP SWITCH. RoHS&REACH Compliant / Halogen Free. Color: B=Blue R=Red K=Black(BSM)

SP-001 1/10 Order Information BS M 2F 06 G B T - R - U Contact Forms: None=Standard 2F=2PST Terminal: None=Straight M=SMD Actuator: G=Raise Actuator L=Flat Actuator Positions: 02=2 Position 06=6 Position

POWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control

FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series FEATURES Width 5mm, height 12mm (31% smaller than NY series) area 100 mm 2, super slim, low power, compact and light weight 2.5gr. Nominal

Snap Action Switch. General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D D2F-FL-A D2F-FL-A1

Snap Action Switch Subminiature Snap Action Switch Super compact, ideal for PCB mounting Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads (microvoltage/microcurrent)

FTR-P3 Series (Reflowable)

COMPACT POWER RELAY For automotive applications 1 POLE-25A (for 12V car battery) FTR-P3 Series (Reflowable) FEATURES Compact for high density packaging 1 pole 25A, 1 form A / 1 form C Coil power savings

Distinctive Characteristics

Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction