DIP Product Selection Guide

Transcription

1 DIP Product Selection Guide H DIP DIP Series TDP TDA SDA SD D PA TDD SPA RTE CD CRD Switch Type Half-pitch Half-pitch Low Low Standard Side Jumper Single Rotary 8 mm 0 mm Profile Profile Profile Actuated Switch In-line & Coded Coded Coded Side Package Rotary Rotary actuated No. of -0 & , 0 & 6 0 & 6 Positions (even only) (even only) (except ) (except ) (except ) (except ) (even only) 0,6 Contact SPST SPST SPST SPST SPST SPST SPDT SPST Coded Coded Coded Style Profile.7 (,).087 (,).89 (,80).68 (,7).97 (7,55).87 (7.).090 (,). (6,).67 (,5).68 (,7).7 (6,9) off PC Thru-hole Thru-hole Vertical Thru-hole Vertical Thru-hole Thru-hole Vertical.77 (,5).60 (,06).80 (9,65).77 (7,0).69 (,).5 (8,5).0 (8,6). (0.5) SMT SMT Rt. Angle SMT Rt. Angle Rt. angle Rt. angle Rt. angle Process washable washable washable washable washable washable washable washable washable washable Sealed with tape with tape (tape not with tape (tape not (tape not with tape (tape not NA (tape not (tape not seal seal required) seal required) required) seal required) required) required) Extended Actuator Flush Actuator Thru-hole Vertical Right Angle Surface Mount Tape & Reel (SMT only) Maximum 00mA 00mA 00mA 00mA 00mA 00mA 00mA 0mA 00mA 0.VA 0.VA Current Retention Feature Page No. H H 6 H 9 H H 6 H 8 H- H H 5 C option H- H-5 H Dimensions are shown: Inch (mm)

2 TDP Series Ultra-miniature Surface Mount Half-pitch Side-Actuated DIP Switches Features/enefits World s first ultra-miniature SMT half-pitch side-actuated DIP Side actuation allows visual indication of on/off position in horizontal applications Process sealed for surface mount soldering and washable processing RoHS compliant Lead free Typical Applications Hand-held electronic devices Portable computer and electronic devices Instrumentation and controls H DIP Specifications SWITCH FUNCTION: SPST,, 6, 8, 0 positions. CONTACT RATING: V DC, 5 ma (switching). 50 V DC, 00 ma (steady state). MECHANICAL AND ELECTRICAL LIFE:,000 cycles. CONTACT RESISTANCE: 00 mω max. INSULATION RESISTANCE: V DC min. DIELECTRIC STRENGTH: 00 V AC min. STORAGE TEMPERATURE: 0 C to 85 C. OPERATING TEMPERATURE: 0 C to 85 C. OPERATING FORCE:,9N max. SOLDERAILITY: Per MIL-STD-0F method 08D, or EIA RS-86E method 9 ( hour steam aging). PACKAGING: Switches supplied in rigid dispensing tubes in full tube quantities only, this may affect order quantity. Tape and reel packaging also available. Materials CASE & COVER: glass filled PPS (UL9V-0). ACTUATOR: PA6T (UL9V-0). CONTACTS: Copper alloy with gold plate over nickel plate. TERMINALS: Copper alloy, with gold over nickel plate. All terminals are insert molded. TAPE SEAL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in OFF position. T D P S Designation TDP Number of Positions Actuator H0 Flush Actuator H Extended Actuator Terminations S Gull wing Contact Material Gold Terminal Seal Terminals are sealed Tape Seal (None) with tape D No tape Packaging (None) Tubes R Tape and Reel Note: Tape seal is not available with H Extended Actuators. H Dimensions are shown: Inch (mm)

3 TDP Series Ultra-miniature Surface Mount Half-pitch Side-Actuated DIP Switches H DIP Flush Actuator-No Top Tape, Surface Mount Terminals 0.0/0.00 (0,/0,) 0.0 (0,6) O N (,) DIM 'A' TYP. (,7) C&K TDP08 5A X 0.09 (,0) CHAMFER (,7) 0.00 (7,6) 0.00 (0,76) 0.50 (6,5) 0.50 (8,89) DATE CODE 0.6 (,) 0.08 (0,5) DIM '' 0.6 (6,0) NO. DIM DIM QUANTITY PART NUMER POS. A PER TUE TDP0H0SD 0. (,67) (,7) (0,5) TDP0H0SD 0. (6,) 0.50 (,8) 70 TDP06H0SD 6 0. (8,7) 0.50 (6,5) (0,57) 0.0 (,06) 0.8 (5,8) 0.0 (8,) 0 0 TDP08H0SD 8 0. (,9) 0.50 (8,89) 0 TDP0H0SD (,8) 0.50 (,) 0 Schematic SPST Flush Actuator-with Top Tape, Surface Mount Terminals 0.0/0.00 (0,/0,) TAPE SEAL O N 0.0 (0,6) MAX. (,6) 0.6 (,) 0.07 (,) DIM 'A' TYP. (,7) C&K TDP08 5A X 0.09 (,0) CHAMFER 0.08 (0,5) DATE CODE (,7) 0.00 (7,6) 0.00 (0,76) DIM '' 0.50 (6,5) 0.50 (8,89) TAPE SEAL 0.9 (6,06) 0.6 (6,0) NO. DIM DIM QUANTITY PART NUMER POS. A PER TUE TDP0H0S 0. (,67) (,7) 5 TDP0H0S 0. (6,) 0.50 (,8) (0,5) TDP06H0S 6 0. (8,7) 0.50 (6,5) 50 TDP08H0S 8 0. (,9) 0.50 (8,89) (0,57) 0.0 (,06) 0.8 (5,8) 0.0 (8,) 0 0 TDP0H0S (,8) 0.50 (,) 0 Schematic SPST H Dimensions are shown: Inch (mm)

4 TDP Series Ultra-miniature Surface Mount Half-pitch Side-Actuated DIP Switches Extended Actuator-No Top Tape, Surface Mount Terminals 0.0/0.00 (0,/0,) 0.0 (0,6) O N (,) DIM 'A' C&K TDP08 5A TYP. (,7) X 0.09 (,0) CHAMFER DATE CODE (,7) 0.00 (7,6) 0.00 (0,76) 0.50 (6,5) 0.50 (8,89) H DIP (,) NO. DIM DIM QUANTITY PART NUMER POS. A PER TUE 0.08 (0,5) 0.6 (6,0) DIM '' TDP0HSD 0. (,67) (,7) (0,75) TDP0HSD 0. (6,) 0.50 (,8) 70 TDP06HSD 6 0. (8,7) 0.50 (6,5) (0,5) TDP08HSD 8 0. (,9) 0.50 (8,89) 0 TDP0HSD (,8) 0.50 (,) 0 Schematic SPST 0.0 (0,57) 0.8 (5,8) 0.0 (,06) 0.0 (8,) 0 0 Tube Packaging (,) 0.0 (,) 0.0 (,) R 0.00 (R 0,5) 0.09 (,0) 9.690±.09 (500,0±,0) 0.8 (6,) 0.0 (5,) MODEL NUMER QTY IN TUE 0. (,) 0.0 (,) Note: Switch shown has H extended actuator (0,5) R 0.0 (R,) TDP0 5 TDP0 70 TDP06 50 TDP08 0 TDP0 0 Tape and Reel Packaging MARKING LAEL EMOSSED CARRIER 0.57 (,00) 0.7 (,00) A (,00) PIN # (,75) 0.9 (,86) REF 0.0 (0,0) DIRECTION OF FEED DIM DIM. DIM PART NUMER W P PER REEL Ø0.059 (,50Ø) C&K TDP08 5A (,5) DIM. 'W' SEE CHART DIM. P SEE CHART 0.50 (8,9) SECTION - TDP (6,0) 0.75 (,5),000 TDP (6,0) 0.76 (7,0),000 TDP (6,0) 0.76 (9,55), (8,9) A NOTE: PART NUMER SHOWN:TDP08HSDR FEED DIRECTION SECTION A-A TDP (,0) 0.76 (,),000 TDP (,0) (,65),000 H 5 Dimensions are shown: Inch (mm)

5 TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches H DIP Features/enefits ifurcated contact for increased electrical reliability Process sealed for surface mount soldering and washable processing RoHS compliant Typical Applications Hand-held electronic devices Portable computer and electronic devices Instrumentation and controls Specifications SWITCH FUNCTION: SPST,,, 6, 8 & 0 positions. CONTACT RATING: V DC, 5 ma (switching). 50 V DC, 00 ma (steady state). MECHANICAL AND ELECTRICAL LIFE:,000 cycles. CONTACT RESISTANCE: 00 mω max. INSULATION RESISTANCE: V DC min. DIELECTRIC STRENGTH: 00 V AC min. STORAGE TEMPERATURE: -0 C to 85 C. OPERATING TEMPERATURE: -0 C to 85 C. OPERATING FORCE:,9N max. SOLDERAILITY: Per MIL-STD-0F method 08D, or EIA RS-86E method 9 ( hour steam aging). PACKAGING: Switches supplied in rigid dispensing tubes in full tube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging quantity varies with model. Materials CASE & COVER: PPS (UL9V-0) ACTUATOR: LCP (UL9V-0). CONTACTS: Copper alloy, with gold plate over nickel plate. TERMINALS: Copper alloy, with gold flash over nickel plate. All terminals are insert molded. TAPE SEAL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Note: All switches supplied in OFF position. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in OFF position. T D A H 0 NEW Number of Positions TDA0* TDA0 TDA0 TDA06 TDA08 TDA0 Flush Actuator H0 Terminations S Gull wing J* J bend Contact material Gold Sealed Packaging NONE Tubes R T/R * TDA0H0JR is not available, TDA0 only offered in tape & reel H 6

6 TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches, DIM 'A',7,7 0,76 ON C&K TDA08 0,8 CHAMFER 7,6 6,5 8,89 H TDA08H0S 0,5 TYP.,7 DIP 0, TAPE SEAL, 6,, 0,57,06 6,0 8, 0,5, DIM A SEE CHART PART NUMER,7 TYP 0,76 TYP X 0,8 CHAMFER DATE CODE 5,7,77 6,97 DIM '' SEE CHART 0, TAPE SEAL 6, 0 ~5 0,5 TYP TDA0H0J,,5 0,5 TYP,7 TYP TYP 6,5 TYP SEE DETAIL Tube Package MARKING LAEL ON END OF TUE ROHS NO. QUANTITY PART NUMER POS. DIM. A DIM. PER TUE 500,0 REF,0 REF,0 REF,0 REF,0 TDA0H0S,0 NA NA TDA0H0_,67,7 5 TDA0H0_ 6,,8 70 TDA06H0_ 6 8,75 6,5 50 TDA08H0_ 8,9 8,89 0 TDA0H0_ 0,8, 0 Schematic REEL DIAMETER 0mm MARKING LAEL EMOSSED CARRIER REF,0 5 6 ON C&K TDA06 DIM 'W' SEE CHART SPST Tape & Reel Package ROHS NO. QUANTITY PART NUMER POS. DIM. W PER REEL DIRECTION OF FEED,0,0 DIRECTION OF FEED TDA0H0SR* 6,0 500 TDA0H0_R 6,0 000 TDA0H0_R 6,0 000 TDA06H0_R 6 6,0 000 TDA08H0_R 8,0 000 TDA0H0_R 0,0 000 * see next page for TDA0 tape & reel drawing H 7

7 TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches H TDA0H0SR DIP SEE DTEAIL A R0. MAX O.0 0. TYP SEE DETAIL "' DETAIL "" H 8 Dimensions are shown: Inch (mm)

8 SDA Series Low Profile DIP Switches Features/enefits Low profile design saves space Thru-hole and surface mount models Tape and reel packaging available RoHS compliant Typical Applications Address switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications H DIP Specifications CONTACT RATING: 5 V DC or 00 5 V DC. MECHANICAL AND ELECTRICAL LIFE:,000 cycles at rated loads. CONTACT RESISTANCE: 50 mω max. initial. INSULATION RESISTANCE: 00 MΩ between terminals. DIELECTRIC WITHSTANDING VOLTAGE: 00 V DC min. for minute. STORAGE TEMPERATURE: -0 C to 85 C. OPERATING TEMPERATURE: -0 C to 85 C. OPERATING FORCE: 800 grams max. SOLDERAILITY: Dip and look solderability testing per C&K spec. #8. Unplated edges of terminals permitted. PACKAGING: Switches supplied in rigid dispensing tubes in fulltube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging also available for surface mount options. Materials HOUSING: PPS, color black (UL9V-0). COVER: PPS, color black (UL9V-0). ACTUATOR: PA6T (UL9-0) CONTACTS: Gold plated eryllium copper. TERMINALS: Gold plate over nickel plated brass. TAPE SEAL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. For Tin Lead options consult customer service center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in OFF position.. S D A H Number of Positions SDA0 SDA0 SDA0 SDA0 SDA05 SDA06 SDA07 SDA08 SDA09 SDA0 SDA Actuator H0 Flush H Extended Terminations lank Thru-hole S Gull wing Contact material Gold Sealed D None lank Top tape seal Packaging NONE Tubes R T/R H 9 Dimensions are shown: Inch (mm)

9 SDA Series Low Profile DIP Switches Flush Actuator No Tape, Thru-hole Terminals H ROHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE DIP SDA08H0D DIM 'A' TRAVEL.05 (,0).8.8 (,5) (,65).06 (,70) Ø.0 (0,8) TYP..00 (,5) TYP..95 (7,9) (,60).6.0 (,5) (8,0) (0,6).00 TYP. (7,6).00 (0,5) SDA0H0D.78 (,5) 00 SDA0H0D.78 (7,06) 60 SDA0H0D.78 (9,60) 5 SDA0H0D.76 (,0) 5 SDA05H0D (,68) 0 SDA06H0D (7,8) 5 SDA07H0D (9,76) 0 SDA08H0D (,6) 0 SDA09H0D (,8) 5 SDA0H0D (7,) 5 SDAH0D.79 (,50) Schematic NOTE: SDA 0 options are,5mm thick SPST Flush Actuator With Top Tape, Thru-hole Terminals SDA08H0.8 (,65) TRAVEL DIM 'A'.05 (,0) PEELALE TAPE SEAL Ø.0 TYP. (0,8).00 TYP. (,5).8 (,5).06 (,70).95 (7,9) (,60).6.0 (,5) (8,0) (0,6).00 TYP. (7,6).00 (0,5) ROHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SDA0H0.78 (,5) 00 SDA0H0.78 (7,06) 60 SDA0H0.78 (9,60) 5 SDA0H0.76 (,0) 5 SDA05H (,68) 0 SDA06H (7,8) 5 SDA07H (9,76) 0 SDA08H (,6) 0 SDA09H (,8) 5 SDA0H (7,) 5 SDAH0.79 (,50) Schematic NOTE: SDA 0 options are,5mm thick SPST Dimensions are shown: Inch (mm) H 0

10 SDA Series Low Profile DIP Switches Flush Actuator With Top Tape, Surface Mount Terminals ROHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SDA0H0S.78 (,5) 00 SDA0H0S.78 (7,06) 60 SDA0H0S.78 (9,60) 5 SDA0H0S.76 (,0) 5 SDA05H0S (,68) 0 SDA06H0S (7,8) 5 SDA07H0S (9,76) 0 SDA08H0S (,6) 0 SDA09H0S (,8) 5 SDA0H0S (7,) 5 SDAH0S.79 (,50) Schematic.75 (,5) DIM 'A' (0,6) PEELALE TAPE SEAL TRAVEL.05 (,0).00 (,5).0 TYP. (6,0).059 MIN. (,50).95 (7,9).66 (9,0).00 (,5) TYP..09 MIN. (0,).0 (0,79) SDA08H0S H DIP SPST NOTE: SDA 0 options are,5mm thick Flush Actuator No Tape, Surface Mount Terminals ROHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SDA0H0SD.78 (,5) 00 SDA0H0SD.78 (7,06) 60 SDA0H0SD.78 (9,60) 5 SDA0H0SD.76 (,0) 5 SDA05H0SD (,68) 0 SDA06H0SD (7,8) 5 SDA07H0SD (9,76) 0 SDA08H0SD (,6) 0 SDA09H0SD (,8) 5 SDA0H0SD (7,) 5 SDAH0SD.79 (,50) DIM 'A' (,5) TRAVEL.05 (,0).0 TYP. (6,0).059 MIN. (,50).8 (,5).95 (7,9).00 (,5) TYP..09 MIN. (0,) SDA08H0SD Schematic SPST.0 (0,6).00 (,5).66 (9,0) NOTE: SDA 0 options are,5mm thick.0 (0,79) Extended Actuator No Top Tape, Thru-hole Terminals ROHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SDA08HD.8 (,65) DIM 'A' (,) TRAVEL.05 (,0).8 (,5) Ø.0TYP. (0,8).00 TYP. (,5).09 (,0) (,60).6.0 (,5) (8,0) (0,6) NOTE: SDA 0 options are,5mm thick.00 (7,6) TYP..09 (,0).95 (7,9).00 (0,5) SDA0HD.78 (,5) 00 SDA0HD.78 (7,06) 60 SDA0HD.78 (9,60) 5 SDA0HD.76 (,0) 5 SDA05HD (,68) 0 SDA06HD (7,8) 5 SDA07HD (9,76) 0 SDA08HD (,6) 0 SDA09HD (,8) 5 SDA0HD (7,) 5 SDAHD.79 (,50) Schematic SPST H Dimensions are shown: Inch (mm)

11 SDA Series Low Profile DIP Switches Extended Actuator No Top Tape, Surface Mount Terminals ROHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE H DIP SDA08HSD.75 (,5) DIM 'A' TYP. (6,0) TRAVEL.05 (,0).059 MIN. (,50).00 TYP. (,5).05 (,0) (,0) (7,9) (,5).09 MIN. (0,) SDA0HSD.78 (,5) 00 SDA0HSD.78 (7,06) 60 SDA0HSD.78 (9,60) 5 SDA0HSD.76 (,0) 5 SDA05HSD (,68) 0 SDA06HSD (7,8) 5 SDA07HSD (9,76) 0 SDA08HSD (,6) 0 SDA09HSD (,8) 5 SDA0HSD (7,) 5 SDAHSD.79 (,50).0 TYP. (0,6).00 (,5).66 (9,0).0 (0,79) Schematic NOTE: SDA 0 options are,5mm thick SPST Tape & Reel Packaging Surface Mount Options only MODEL NO. 'S' OPTION DIM. 'H' (REF.) DIM. 'W' DIM. 'W' DIM. '' (REF.) (REF.) (REF.) DIM. 'C' (REF.) DIM. 'D' (REF.) QUANTITY PER REEL SDA0 H N/A H SDA0 H N/A H SDA0 H N/A H SDA0 H N/A H SDA05 H N/A H SDA06 H H SDA07 H H NOT CURRENTLY AVAILALE IN TAPE AND REEL SDA08 H H SDA09 H H SDA0 H H SDA H H NOT CURRENTLY AVAILALE IN TAPE AND REEL SDA0HSDR OPTION SHOWN A A 8 TYP 5..5 SECTION TYP "H" TYP "C" DIRECTION OF FEED MAX "W" MAX 0.±0.05 "" SECTION A-A 'W' TYP -5 OPTION SDA0 SHOWN 'W' A 'C' TYP TYP.5 TYP.75 A MAX 0. '' SCALE DETAIL :: A.5 TYP DIRECTION OF FEED SECTION OPTION SDA08 SHOWN MAX 0. 'C' SEE DETAIL A REEL LAYOUT SCALE :: 'W' 'D' A A '' 0 6 SECTION A-A MAX 'H' DIRECTION OF FEED SECTION - H Dimensions are shown: Inch (mm)

12 SD Series Low Profile DIP Switches Features/enefits Low profile design saves space Thru-hole and surface mount models Tape and reel packaging available Sealed with top tape RoHS compliant Typical Applications Address switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications H DIP Specifications SWITCH FUNCTION: SPST -,,, 5, 6, 7, 8, 9, 0 & positions CONTACT RATING: Carry: V DC max. Switch: 0. 5 V DC min to 00 5 V DC max. MECHANICAL AND ELECTRICAL LIFE:,000 make-and-break cycles at full load, each circuit. CONTACT RESISTANCE: elow 50 milliohms typ. - V DC, 00mA. INSULATION RESISTANCE: 0 9 ohms min. DIELECTRIC STRENGTH: 500 V RMS sea level between adjacent terminals. STORAGE TEMPERATURE: -0 C to 85 C. OPERATING TEMPERATURE: -0 C to 85 C. OPERATING FORCE: g inital. PACKAGING: Thru-hole switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Surface mount switches available in tape and reel packaging by added R to end of part number;,000 pieces per reel. Switch position denotes pin number. All switch actuators in OFF position, standard. Materials CASE & COVER: (PPA), flame retardant (UL 9V-0) ACTUATOR: Nylon, flame retardant (UL 9V-0) CONTACTS: ecu with gold plate. TERMINALS: right tin-plated brass. TERMINAL SEAL: All terminals insert molded. TAPE SEAL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. S D Number of Positions SD0 SD07 SD0 SD08 SD0 SD09 SD05 SD0 SD06 SD Actuator H0 Flush Actuator OFF position H Extended Actuator OFF position H Flush Actuator ON position H Extended Actuator ON position Terminations S Gull wing (None) PC ThruHole Contact Material Gold 0µ IN Gold 0µ IN * Packaging (None) Tubes R Tape and Reel Process Seal (None) Tape seal D No tape seal * Consult factory for availability H Dimensions are shown: Inch (mm)

13 SD Series Low Profile DIP Switches H DIP Sealed Flush Actuator With Top Tape, Thru-hole Terminals Process sealed - withstands soldering and cleaning processes.6 (6,68) ON DIM. 'A' SEE CHART ORIENTATION MARK PEELALE TAPE SEAL.07 (0,70) ACTUATOR TRAVEL. (,6).68 TYP. (,7) Ø.08 (0,97) TYP..00 (,5) TYP..5 TYP. (8,00).00 TYP. (7,6) ROHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SD0H0.58 (6,55) 85 SD0H0.58 (9,09) 60 SD0H0.58 (,6) 5 SD05H (,7) 0 SD06H (6,7) 0 SD07H (9,5) 5 SD08H (,79) 5 SD09H (,) 0 SD0H (6,87) 0 SDH0.58 (,95) 5 Schematic.0 TYP. (0,60) STANDOFF.059 TYP. (,50).0 TYP. (0,55).6 TYP. (,0).00 TYP. (,5).00 TYP. (0,5).5 TYP. (8,5) SPST Table applicable to H0 and H actuator options. Sealed Flush Actuator With Top Tape, Surface Mount Terminals.6 (6,68) ON DIM. 'A' SEE CHART ORIENTATION MARK PEELALE TAPE SEAL.07 (0,70) ACTUATOR TRAVEL.60 (,06) WITH TAPE. (,6). TYP. (6,7).0 MIN. (,).5 TYP. (8,00).00 (,5) TYP..5 MIN. (,05) RoHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SD0H0S.58 (6,55) 85 SD0H0S.58 (9,09) 60 SD0H0S.58 (,6) 5 SD05H0S (,7) 0 SD06H0S (6,7) 0 SD07H0S (9,5) 5 SD08H0S (,79) 5 SD09H0S (,) 0 SD0H0S (6,87) 0 SDH0S.58 (,95) 5.00 TYP. (0,5) STANDOFF.0 TYP. (0,55).00 TYP. (,5).00 TYP. (0,5).00 (7,6).90 (9,9) Schematic SPST Table applicable to H0 and H actuator options. Sealed Extended Actuator With Top Tape, Thru-hole Terminals.6 (6,68).00 TYP. (0,5) ON DIM. 'A' SEE CHART ORIENTATION MARK PEELALE TAPE SEAL.07 (0,70) ACTUATOR TRAVEL. (,6).68 TYP. (,0) Ø.08 (0,97) TYP..00 (,5) TYP..5 TYP. (8,00).00 TYP. (7,6) RoHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SD0H.58 (6,55) 85 SD0H.58 (9,09) 60 SD0H.58 (,6) 5 SD05H (,7) 0 SD06H (6,7) 0 SD07H (9,5) 5 SD08H (,79) 5 SD09H (,) 0 SD0H (6,87) 0 SDH.58 (,95) 5.0 TYP. (0,60) STANDOFF.059 TYP. (,50).0 TYP. (0,55).6 TYP. (,0).00 TYP. (,5).00 TYP. (0,5).5 TYP. (8,5) Schematic SPST Table applicable to H and H actuator options. Dimensions are shown: Inch (mm) H

14 Sealed Extended Actuator With Top Tape, Surface Mount Terminals SD Series Low Profile DIP Switches RoHS NO. QUANTITY PART NUMER POS. DIM. A PER TUE SD0HS.58 (6,55) 85 SD0HS.58 (9,09) 60 SD0HS.58 (,6) 5 SD05HS (,7) 0 SD06HS (6,7) 0 SD07HS (9,5 5 SD08HS (,79) 5 SD09HS (,) 0 SD0HS (6,87) 0 SDHS.58 (,95) 5.6 (6,68).00 TYP. (0,5) ON DIM. 'A' SEE CHART ORIENTATION MARK PEELALE TAPE SEAL.07 (0,70) ACTUATOR TRAVEL.70 (,) WITH TAPE. (,6). TYP. (6,7).0 MIN. (,).5 TYP. (8,00).00 (,5) TYP..5 MIN. (,05) H DIP Schematic SPST.00 TYP. (0,5) STANDOFF.0 TYP. (0,55).00 TYP. (,5).00 TYP. (0,5).00 (7,6).90 (9,9) Table applicable to H and H actuator options. TAPE & REEL PACKAGING SURFACE MOUNT OPTIONS ONLY RoHS NO. QUANTITY PART NUMER POS. DIM. A PER REEL.079 (,00) DIM P SEE CHART SD0H0SR.58 (6,55) 000 SD0H0SR.58 (9,09) 000 SD0H0SR.58 (,6) 000 SD05H0SR (,7) 000 SD06H0SR (6,7) 000 SD07H0SR (9,5 000 SD08H0SR (,79) 000 SD09H0SR (,) 000 SD0H0SR (6,87) 000 SDH0SR.58 (,95) 000 DIM SEE CHART.057 (,00).06 DIA (,55).069 (,75) DIM C SEE CHART DIM G SEE CHART DIM D SEE CHART Schematic SPST Table applicable to H0 and H actuator options. DIM A SEE CHART ELONGATED HOLES ON SD07-SD ONLY FEED DIRECTION SWITCH NO. SD0 SD0 SD0 SD05 SD06 SD07 SD08 SD09 SD0 SD DIM A POCKET OTTOM.(0,5).06(0,).9(0,9).06(0,).06(0,).06(0,).06(0,).06(0,).06(0,).06(0,) DIM POCKET OTTOM.5(8,0).06(0,).76(,).60(5,).70(7,8).80(0,).85(,7).08(6,).055(6,8).0(,) DIM C TAPE WIDTH.60(6,0).60(6,0).95(,0).95(,0).95(,0).60(,0).7(,0).7(,0).7(,0).7(,0) DIM D POCKET DEPTH.77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5) DIM G SPROCKET HOLE SPACING N/A N/A N/A N/A N/A.8(8,).59(0,).59(0,).59(0,).59(0,) DIM P PITCH ETWEEN POCKETS.7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0) Reel Information Outside diameter.00 (,0) Pilot hole.5 (,0) H 5 Dimensions are shown: Inch (mm)

15 D Series Standard Profile DIP Switches H DIP Features/enefits Traditional full profile DIP switch Extended actuator for easy actuation Open bottom construction allows for solder washing without the need for tape seal RoHS compliant Typical Applications Address switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications Specifications SWITCH FUNCTION: SPST - thru position available (except position). CONTACT RATING: Carry: 00 ma 50 V DC. Switch: 00 ma 5 V DC or 5 ma 5 V DC. MECHANICAL AND ELECTRICAL LIFE: 0,000 make-and-break cycles at full load, each circuit. CONTACT RESISTANCE: elow 50 milliohms typ. - V DC 00mA. INSULATION RESISTANCE: 0 9 ohms min. DIELECTRIC STRENGTH: 500 V RMS sea level between adjacent terminals. CAPACITANCE: 5pF max. between adjacent terminals. STORAGE & OPERATING TEMPERATURE: -0 C to 85 C. SHOCK: Withstands 0g ms sawtooth waveform with no contact opening greater than 0 microseconds. VIRATION: No contact opening greater than 0 microseconds and no contact closure when exposed to vibration.06 in DA or 5g, whichever is less, from 0 to 55 Hz, and 0g from 55 to 500 Hz. SOLDERAILITY: Per MIL-STD-0F method 08D, or EIA RS-86E method 9 ( hour steam aging). PACKAGING: Switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Number of switches per tube varies with model. Switch position denotes pin number. All switch actuators in OFF position, standard. Materials CASE & COVER: Glass filled polyester (PT), flame retardant (UL 9V-0). ACTUATOR: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 9V-0) CONTACTS: Gold over nickel over phosphor bronze. TERMINALS: Matte-tin over nickel over phosphor bronze. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Vertical Full Profile DIP QUANTITY PART NUMER NO.POS. DIM. A DIM. PER TUE D08.00 (0,77) DIM 'A' ON.80 (9,65) TYP. (,5).60 TYP. (,06).06 (,58) MAX ACTUATOR TRAVEL.65 (6,7).97 (7,55).0 (0,8) TYP. Ø.08 TYP. (0,97).00 TYP. (,5) DIM ''.080 TYP. (,0) D0.80 (,57) NA 5 D0.80 (7,).00 (,5) 7 D0.80 (9,65).00 (5,08) 5 D0.80 (,9).00 (7,6) D (,7).00 (0,6) 5 D (7,7).500 (,75) 0 D (9,8).600 (5,) 6 D (,5).700 (7,78) D (,89).800 (0,) D (7,).900 (,.86) 9 D.80 (,5).00 (7,9) 6 Schematic.089 (,6).00 TYP. (,5).00 TYP. (0,5). TYP. (,58).006 (0,6).97 (7,55) SPST H 6 Dimensions are shown: Inch (mm)

16 D Series Standard Profile DIP Switches Open ase and AV Right Angle Terminal Style QUANTITY PART NUMER NO.POS. DIM. A PER TUE D0AV.80 (7,) 7 D0AV.80 (9,65) 5 D0AV.80 (,9) D05AV (,7) 5 D06AV (7,7) 9 D07AV (9,8) 6 D08AV (,5) D09AV (,89) 0 D0AV (7,) 8 DAV.80 (,5) (0,77).80 (9,65) ON (,7) DIM.A TYP. (,55) (,6) 0.97 (7,55).080 (,0).5 (,8).0 (0,8) TYP. D08AV H DIP Schematic SPST.00 TYP. (0,5).00 TYP. (,5).00 (,5).006 (0,6).0 (8,).00 (0,5).00 (,5).00 TYP. (,5).06 DIA TYP. (,7ø) Installation, Soldering and Cleaning All D Series Standard Profile DIP Switches can be hand soldered or machine soldered without the use of boot, caps, tapes or special attention. Open base washable models have unique design, allowing solvent cleaners and water/detergent solutions to flush and clean the electrical contacts of the contaminants and fluxes. For best results, follow these directions: ) Wave soldering recommended at 500 F (60ºC) solder temperature. ) Hand solder using 0 watt small tip iron controlled at 500 F (60ºC), 0 seconds max./terminal. ) Open base washable models: Clean flux using forced rinse, high agitation or triple bath cleaning method. DO NOT mask or cover switch in any way during cleaning. Switch is designed for easy solvent flush out. ) All switch actuators must be in OFF position during soldering and cleaning processes. Dimensions are shown: Inch (mm) H 7

17 PA Series Side Actuated DIP Switches H DIP Features/enefits Side actuated contacts Available in thru-hole or SMT models High pressure contact system does not require tape seal for washing RoHS compliant & compatible Typical Applications Address switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications Specifications SWITCH FUNCTION: thru 0 and position available. CONTACT RATING: 00 ma 5 V DC or 5 ma V DC. MECHANICAL AND ELECTRICAL LIFE:,000 cycles 5 V DC 0mA. CONTACT RESISTANCE: 50 milliohms initial max. INSULATION RESISTANCE: 00 V DC 00 megohms min. DIELECTRIC WITHSTAND VOLTAGE: 00 V AC for minute. STORAGE TEMPERATURE: -0 C to 85 C. OPERATING TEMPERATURE: -0 C to 85 C. OPERATING FORCE: 800 grams max. SOLDERAILITY: Flow solderable and washable (soldering: 60 C for 0 sec. max.) PACKAGING: Switches supplied in rigid dispensing tubes in fulltube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging available for SMT options. Materials HOUSING: PPS, color black (UL9V-0). COVER: PPS, color black (UL9V-0). ACTUATOR: PA-6T UL9V-0). CONTACTS: eryllium Copper with Gold over Nickel plate. TERMINALS: rass, Gold over Nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in OFF position. P A Model PA0 position PA0 positions PA0 positions PA0 positions PA05 5 positions PA06 6 positions PA07 7 positions PA08 8 positions PA09 9 positions PA0 0 positions PA positions On Position NONE Down R Up Terminations NONE PC S Gull wing Contact material ecu, Gold over nickel plate Packaging NONE Tube R Tape and Reel (Surface Mount only) Dimensions are shown: Inch (mm) H 8

18 PA Series Side Actuated DIP Switches Side Actuator Thru-hole Terminals ROHS NO. QUANTITY PART NUMER POS. DIM. A DIM. PER TUE PA0.76 (,8) N/A 00 PA0.76 (7,0).00 (,5) 60 PA0.76 (9,6).00 (5,08) 5 PA0.76 (,).00 (7,6) 5 PA (,6).00 (0,6) 0 PA (7,).500 (,70)) 5 PA (9,7).600 (5,) 0 PA (,).700 (7,78) 0 PA (,8).800 (0,) 5 PA (7,).900 (,86) 5 PA.80 (,5).00 (7,9) (,) C&K PA (7,6) PA08 H DIP Schematic A 0.00 (,5) ø (0,8+0,/-0) SPST NOTE: Reverse throw available, contact C&K for P/N and quote (6,0) (,) 0.00 (,5) PITCH ON (8,5) 0.7 (,) 0.08 (,) (0,75) 0.09 (,0) 0.57 (,0) 0.06 (,7) (,6+0/-0,) (0,6+0/-0,) 0.99/0. (7,6/8,7) 0.00 (0,5) Side Actuator Surface Mount Terminals ROHS NO. QUANTITY PART NUMER POS. DIM. A DIM. PER TUE PA0S.76 (,8) N/A 00 PA0S.76 (7,0).00 (,5) 60 PA0S.76 (9,6).00 (5,08) 5 PA0S.76 (,).00 (7,6) 5 PA05S (,6).00 (0,6) 0 PA06S (7,).500 (,70)) 5 PA07S (9,7).600 (5,) 0 PA08S (,).700 (7,78) 0 PA09S (,8).800 (0,) 5 PA0S (7,).900 (,86) 5 PAS.80 (,5).00 (7,9) Schematic C&K PA08 5 PA08S "" SEE CHART SPST NOTE: Tape and reel packaging available by adding R to end of project number. 0.6 (6,0) (,) 0.0/0.0 (0,85/,0) A 0.00 (,5) PITCH ON (,6+0/-0,) 0.0 (0,6+0/-0,).5 TYP.5 MIN TYP P.C. MOUNTING 0.00 (0,5) 0.0 (0,8) 0. (8,5) 0.7 (,) 0.66 (9,) 0.08 (,) 0.09 (0,75) (0,8) 0.09 (,0) Dimensions are shown: Inch (mm) H 9

19 PA Series Side Actuated DIP Switches Tape & Reel Packaging Surface Mount Options Only H DIP QTY/ REEL POLES DIM. A DIM. DIM. C DIM. D DIM. E.5 (,5).95 (,0).50 (,5).960 (,).5 (,5).95 (,0). (7,9).960 (,).5 (,5).95 (,0).09 (0,).960 (,).5 (,5).95 (,0).508 (,9).960 (,) 5.5 (,5).95 (,0).606 (5,).960 (,) (,).8 (8,).60 (,0).709 (8,0).75 (,) (,).8 (8,).60 (,0).807 (0,5).75 (,) (0,).590 (0,).7 (,0).89 (,7).78 (,) (0,).590 (0,).7 (,0).00 (5,5).78 (,) (0,).590 (0,).7 (,0).06 (8,).78 (,).795 (0,).590 (0,).7 (,0). (,).78 (,) Position DIM 'C' (,00) FEED DIRECTION PA (,0) DIM 'A' Ø (Ø,50) (,75) DIM 'D' 0 MAX Note: For tape and reel packaging, add R to end of part number (6) 0.09 (5,) (,5) (,00) 0 0 x 0 0 DIM. 'E' x.079 (P-7P) ( x.0) x.8 (8P-0P) ( x.0) 0.5 (8,0) 0 MAX ø.87 ø(,0),, & 5 Positions.0 (0).97 (00,0) FEED DIRECTION 0.76 ±.008 (7,0 ± 0,) ø.5 ø(,0) Tube Packaging (,0) 0.07 (,8) 0.00 (0,5) 0.5 (,0) 0.97 (5,0) 0. (,0) ø7.8 ø(90,0) MARKING LAEL ON END OF TUE 9.68 ± 0.0 (500,0 ±,0) 0.77 (,5) 0.56 (6,5) 0.00 MAX. (0,5) TYP REF. (,0) 0.5 (,0).079 (,00).079 (,00).60 (6,0).57 (,00) 6, 7, 8, 9, 0 & Positions.57 (,00) Ø.059 (,50).50 (,5) Ø.0 (0,0) MAX. Ø.059 (,50) FEED DIRECTION.069 (,75) 0 MAX. DIM. 'A' DIM 'D' DIM. 'C' 0 MAX..5 (8,00).069 (,75) 0.00 (0,5) 0 MAX. DIM. 'A' DIM. 'C' DIM 'D' DIM. '' Ø.0 (0,0) MAX. Ø.0 (0,0) MAX. SEE DETAIL A.60 (6,0).50 (,5) 0 MAX (0,5).5 (8,00) H 0 Dimensions are shown: Inch (mm)

20 TDD Series Jumper Switch Features/enefits ifurcated contact for increased electrical reliability Process sealed for surface mount soldering and washable processing RoHS compliant Typical Applications Hand-held electronic devices Portable computer and electronic devices Instrumentation and controls Inverters H DIP Specifications CONTACT RATING: 5 V DC (switching) or V DC (steady state). MECHANICAL AND ELECTRICAL LIFE: 00 cycles at rated loads. CONTACT RESISTANCE: 00 mω max. V DC /0 ma INSULATION RESISTANCE: V DC min. DIELECTRIC STRENGTH: 00 V AC /minute STORAGE TEMPERATURE: -0 C to 85 C. OPERATING TEMPERATURE: -0 C to 85 C. OPERATING FORCE:.9 N max. SOLDERAILITY: Per MIL-STD-0F method 08D, or EIA RS-86E method 9 ( hour steam aging). PACKAGING:,000 pieces tape & reel Materials CASE AND COVER: PPS, color black (UL9V-0). ACTUATOR: LCP (UL9-0) CONTACTS: Copper alloy with gold plate over nickel plate TERMINALS (INSERT MOLDED): Copper alloy gold flash over nickel plate TAPE SEAL: Polyamide Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. For Tin Lead options consult customer service center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in OFF position.. T D D 0 H 0 S R Series Actuator H0 Flush Terminations S Gull wing Contact material Gold Sealed Top tape seal Packaging R T/R Dimensions are shown: Inch (mm) H

21 TDD Series Jumper Switch H,5 (), (C) X 0,6 6±0,5 5,,6,5 X (C) DIP () X 0, PC LAYOUT 5,8±0,5 0,55 STROKE 0,55 STROKE ±0, X, () () SCHEMATIC SPDT,±0, X 0,5 (,) X 0,,±0,5 0,0 0,05 6±0, SECTION A-A A DIRECTION OF FEED,5,75 0,5 THK 7,5 6 R0, DRAFT A 8 TYP SEE DETAIL A SECTION A-A DRAFT R0, MAX 6,5 SECTION -,65 6,5 DETAIL "".,, REF, 5 DETAIL A SCALE 6:,5 DETAIL 6. X REEL NOT TO SCALE H Dimensions are shown: Inch (mm)

22 SPA Series Single In-line Package Switches Features/enefits Thin Single In-line Packaging saves PC space Retention feature holds part to PC prior to soldering Available in vertical or right angle models High pressure contact system does not require tape sealing RoHS compliant Typical Applications Address switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications H DIP Specifications CONTACT RATING: Carry: 0 5VDC Switching: 0. 0.m VDC min. MECHANICAL AND ELECTRICAL LIFE:,000 cycles min. CONTACT RESISTANCE: 50 mω 0 V DC 0mA. INSULATION RESISTANCE: 00 MΩ 00 V DC. DIELECTRIC STRENGTH: 00 V AC. CAPACITANCE: 5pF max. between adjacent terminals. OPERATING TEMPERATURE: -0 C to 60 C. STORAGE TEMPERATURE: -0 C to 80 C. OPERATING FORCE: 5.9N max. SOLDERAILITY: Dip & look solderability testing per C&K spec. #8. Unplated edges of terminals permitted. PACKAGING: Switches supplied in rigid dispensing tubes in fulltube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Materials ASE: PPS (UL9V-0). COVER: PT (UL9V-0). ACTUATOR: /6 Nylon (UL 9V-0). MOVALE CONTACT: eryllium copper alloy, gold over nickel plate. FIXED CONTACT: Copper alloy, gold over nickel plate. CLIP: Phosphor bronze wire. Phosphor bronze, Tin over nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. All switches supplied in OFF position. S P A Number of Positions SPA0 positions SPA0 positions SPA06 6 positions SPA08 8 positions SPA0 0 positions Terminations NONE Vertical A Right Angle Contact material Gold Dimensions are shown: Inch (mm) H

23 SPA Series Single In-line Package Switches Vertical H DIP SPA08.6 (,).08 (0,7).070 (,79). (6,).00 (,5) DIM 'A'.00 (,5) DIM ''.00 (0,50).0 (0,0). (,6) ROHS PART NO. QUANITY NUMER POS. DIM. A DIM. PER TUE SPA0. (8,68).00 (5,08) 50 SPA0.5 (,76).00 (0,6) 0 SPA (8,8).600 (5,) 5 SPA (,9).800 (0,) 0 SPA0 0. (9,00).000 (5,0) 5 Schematic DIM ''.09 (0,99) (0,5) (0,7).00 (,5) Ø.0 TYP. (0,8) SPST C.086 (,).05 (0,9) DIM 'C'.5 (,).06 (,6) SPA08A.00 (0,5) Ø.06 (0.).00 (5,08).6/.5 (6,0/6,).68 (6,8).08 (,).098 (,5). (6,) (,5) DIM '' DIM 'A'.00 RAD. (0,5).065 (,65).8 (,6).00 (0,75).00 (,5).00 DIM '' DIM ''.00 (5,08).00 (,5) Ø.0 TYP. (0,8) ROHS PART # SPA0A SPA0A SPA06A SPA08A SPA0A NO. QTY PER POS. DIM. A DIM. DIM. C TUE. (8,68).00 (5,08).9 (8,6) 50.5 (,76).00 (0,6).50 (,7) (8,8).600 (5,).76 (8,7) (,9).800 (0,).97 (,8) 0 0. (9,00).000 (5,0).8 (8,9) 5 Schematic SPST C H Dimensions are shown: Inch (mm)

24 RTE Series Low Profile Rotary DIP Switches Features/enefits Thru-hole and surface mount models Miniature size with robust metal cover in black or silver nickel finish, 0, & 6 positions Large choice of codings Vertical or reverse versions RoHS compliant Typical Applications Timers, automation components Computer and peripherals Alarms, access control, smoke detectors Instrumentation H DIP Specifications CONTACT RATING: Gold: 00 ma max. 0µ A min. 0 V DC max. 0 mvdc min. MECHANICAL LIFE: 0,000 actuations CONTACT RESISTANCE: 00 mω max. initial; 50 mω after life INSULATION RESISTANCE: 0 0 Ω min. initial DIELECTRIC STRENGTH: 00 Vrms mn OPERATING TEMPERATURE: -5 C to 85 C. STORAGE TEMPERATURE: -0 C to 85 C. PACKAGING: N or R terminations in tube. V termination in box. G termination in reel, 750 pieces per reel. G termination with flush actuator, 50 pieces per reel. Materials COVER: rass, nickel plated (black or silver) ASE: PPS ACTUATOR: LCP MOVALE CONTACTS: ronze, gold plated. STATIONARY CONTACTS: rass, gold plated. TERMINALS: See page I-8 to I-9 O-RING: Silicone Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Solderability: Wave soldering 60º/0 s. SMT are reflow compatible according to C&K lead free specification for SMT components PS-LF-00. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. NOTE: Some of the configurations may not be available or could require some development. Number of Positions R T E RTE0 RTE0 RTE6 ESD Protection and top plate 0 Without ESD - standard plate With ESD - standard plate Without ESD - black plate Actuator 0 Flush, screwdriver slot Extended shaft, 5, 5, 6 Shaft for button - RTE0 version only available with screwdriver slot acuator "0" - Single pole function not available for RTE0/RTE6 - ESD protection available with N thru-hole termination only 5 - Not available in surface mount 6 - uttons ordered separately 8 - Manual - available for RTE0/RTE6 with actuator option only 9 - CD complement code for RTE0, not available with terminations G & M 0 - Grey Code - for RTE0 only - Hexidecimal code for RTE6 only - Grey code for RTE6 only Terminations N Thru-hole V Right angle G Surface mount M Manual 8 R Reverse, thru-hole Switch Function 0 Single pole CD code CD complement code 9 Grey Code 0 Hexadecimal code 7 Grey Code Contact/Terminal Material Gold/ lead free tin H 5 Dimensions are shown: Inch (mm)

25 RTE Series Low Profile Rotary DIP Switches SWITCHES WITH STANDARD OPTIONS H PC Mount-Terminal Option N PART NUMER NO. QTY WITHOUT ESD PIN WITH ESD PIN POS. FUNCTION PER TUE DIP RTE000N0 RTE00N0 SPT 65 RTE000N RTE00N 0 CD 65 RTE600N RTE60N 6 HEXADECIMAL 65 Right Angle Mount-Terminal Option V NO. PART NUMER POS. FUNCTION QUANTITY RTE000V0 SPT 50 per box RTE000V 0 CD 50 per box RTE600V 6 HEXADECIMAL 50 per box Surface Mount-Terminal Option G NO. QUANTITY PART NUMER POS. FUNCTION PER REEL RTE000G0 0 SPT 50 RTE000G 0 CD 50 RTE600G 6 HEXADECIMAL 50 NUMER OF POSITIONS RTE0 POSITION RTE0 0 POSITION RTE6 6 POSITION C C C 6 0' 0' 8 8 H 6 Dimensions are shown: Inch (mm)

26 ESD PROTECTION RTE Series Low Profile Rotary DIP Switches 0 WITHOUT WITH.9 (7,) H. (,65).95 (7,5).67 (,5) DIP 0.78 (9,60) C C.0 (,5).0 (,5).0 (7,6).05 TYP. (ø0,9) 8.05 TYP. (ø0,9).0 (,5) m 8.0 (,5) ACTUATOR 0 FLUSH, SCREWDRIVER SLOT,05 +0, 0,95 +0, 0 0,5+0, 0 EXTENDED SHAFT (not available in surface mount) SHAFT FOR UTTON, ± 0,05, +0,05 0 Ø, ± 0,0 (x) 0 90 R0,,5, ±0,05 +0, 0,5 0 90,55 ± 0,05 R0,, ± 0,05 0,5-0,0 0,6 ± 0,05 ± 0,0, ±0,05, -0, 0 Ø -0,0 0 Ø ±0,05 CAGE,05 +0, 0,5 7,5 0 Ø,95-0,05,9 0-0, R0,09 Ø,6 +0,0 0 Ø,8 +0,05 0 6, 0-0,05 R0,5 0-0,05 H 7 Dimensions are shown: Inch (mm)

27 RTE Series Low Profile Rotary DIP Switches TERMINATIONS N THRU-HOLE H DIP. (,65).5 (8).8 (7,).9 (7,).67 (,5) With ground terminal 0. (,5) C 0. (,5) Without ground terminal 0. (,5) C 0. (,5).95 (7,5) 8 0. (7,6) 8 0. (7,6).78 (9,60).0 (,5).0 (,5) Ø.0 (,05) m 0.05 (0,9) 0.05 (0,9) R REVERSE, THRU-HOLE.6±.008 (,±0.).85±.006 (,7±0.5).9 (7,).0 (,05).00 (0.5).6 ±.008 (,5 ± 0,). (,65).5±.008 (,5±0,).8 (7,).66 (9,).00 (0,5).09 (7.85) 0. (,5) C Ø 0.67 (,5) With ground terminal m 8 0. (,5) 0. (0,6) 0.05 (0,9) Without ground terminal 0. (,5) C 8 0. (,5) 0. (0,6) 0.05 (0,9) V RIGHT ANGLE, THRU-HOLE G SURFACE MOUNT.5 (8,5). 5º0' (,65).8 (,75).57 ().5 (8,0).7 (5,5).8 (7,).77 (,5).0 (0,85).00 (,5).0 (0,6).00 (,5).97 (5,0).97 (5,0).00 (0,0).0 (5,08).5 (6,). (,9).0 (,5).0 (,5).00 (0,5).9 ().06 5x (,6).0 (,8).06 5x (,7).0 (5,08) ø0,9 (ø05).0 (,8).00 (,5).00 (,5).0 (,5).0 (,5) PC layout seen component side H 8 Dimensions are shown: Inch (mm)

28 TERMINATIONS RTE Series Low Profile Rotary DIP Switches M OPTION H.5 (8,0).8 (7,).9 (7,) (,5) (,5) DIP.5 (,9) C.9 (7,). (,65).07 (,8).67 (,5) HOLES.05 (0,9) 8. (7,6).00 (7,6±0,).58 (9,).0 (,05) SWITCH FUNCTION 0 SINGLE POLE CD CODE CD COMPLEMENT CODE POS. C POS. C POS. C Other codes available by request. GREY CODE ( for RTE0 only ) HEXADECIMAL CODE 7 GREY CODE (for RTE0 only) POS. C POS. C POS. C 8 (for RTE6 only) POS. C A C D E F CONTACT MATERIAL OPTION CODE RoHS COMPLIANT RoHS COMPATILE CONTACT MATERIAL TERMINAL PLATING YES YES GOLD LEAD FREE TIN H 9 Dimensions are shown: Inch (mm)

29 .06 (,6) RTE Series Low Profile Rotary DIP Switches UTTONS AVAILALE uttons are ordered separately, shipped in bulk. H DIP Part Number TN RTE 0 TN RTE 50 TN RTE 90 Color Red Green lack.08 (0,7).8 (,0).85 (,7).8 (,0) ø.8 (7,).059 (,5) TAPE AND REEL Tape and reel for RTExx0Gxx 750 pieces per reel..0 (0,).069 (,75).55 (,0).55 (,0).7 () (,0).079 (,0) E.0 (0, ).57 (,0).57 (,0).079 (,0).7 (,0).079 (,0).7 (,0).069 (,75) D.69 (6,0).95 (7,5).09 (0,) ().95 (,0).5 (,50). (6).5 (). ().07 (7,8).0 (7,7) E.059 (,6) FEED DIRECTION Tape and reel for RTExx00Gxx,50 pieces per reel..79 (,5).0 (7,7) D.059 (,5) FEED DIRECTION H 0 Dimensions are shown: Inch (mm)

30 CD Series 8mm DIP Coded Rotary Switches Features/enefits Process sealed withstands soldering and cleaning Thru-hole and surface mount models Compact size saves space 6% smaller than traditional 0mm DIP Crisp, positive detent ensures actuation RoHS compliant Typical Applications Address switching applications Data storage devices Computer and peripherals Instrumentation H DIP Specifications CONTACT RATING: 0. VA 0 V AC or V DC max. MECHANICAL AND ELECTRICAL LIFE: CD0 & CD6: 0,000 actuations. CD08:,000 actuations. CONTACT RESISTANCE: 50 milliohms max. initial. INSULATION RESISTANCE: 00 megohms 50 V AC min. DIELECTRIC STRENGTH: 50 V RMS sea level. OPERATING TEMPERATURE: -5 C to 85 C. STORAGE TEMPERATURE: -0 C to 85 C. SOLDERAILITY: Per MIL-STD-0F method 08D or EIA RS- 86E, method 9 ( hour steam aging). PACKAGING: Switches supplied in rigid tubes in full-tube quantities only: this may affect order quantity. Tube quantity is 60 pieces per tube. Surface mount switches available in tape & reel packaging per EIA 8A, 800 per reel, surface mount with M0 actuator only. Materials COVER: PPS (UL9V-0), Color; lack. ASE: PPS (UL9V-0), Color; lack ACTUATOR: LCP (UL 9V-0), Color White (CDXXR) Color lack (CDXXC) Note: internal o-ring seal standard with all actuators. MOVALE CONTACTS: Copper alloy with gold plate over nickel plate. STATIONARY CONTACTS: Copper alloy with gold plate over nickel plate. TERMINALS: Copper alloy with gold plate over nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. C D Switch Function CD08R 8 position, CD Actuator CD0R 0 position, CD M0 Flush, screwdriver slot CD0C 0 position, CD complement CD6R 6 position, Hexadecimal CD6C 6 position, Hexadecimal complement Terminations A Right Angle, PC Thru-hole C PC Thru-hole S Gull wing Contact/Terminal Material Gold/Gold Packaging NONE Tube R Tape & Reel (SMT, M0 actuator only) H Dimensions are shown: Inch (mm)

31 CD Series 8mm DIP Coded Rotary Switches SWITCHES WITH STANDARD OPTIONS H DIP PC Mount CD6RM0C.00 (,5) C D C A EF (8,0).00 (,5) 8 C.00.5 (5,08) (8,0).05 (0,6) 8 C C.00 (7,6).00 TYP. (,5).0 TYP. (0.8) NO. QUANTITY PART NUMER POS. PER TUE CD08RM0C 8 60 CD0RM0C 0 60 CD0CM0C 0 60 CD6RM0C 6 60 CD6CM0C TYP (0,6).05 (7,75).00 (7,6).68 (,7).5 TYP (,8).00 TYP (0,5).00 TYP (0,5) Right Angle Mount CD0RM0A Ø.0 (0,8) TYP. 8 C C.00 (5,08).0 (8,6).00 TYP. (,5).05 TYP. (0,6) STAND-OFF.099 (,5).050. (,7) (8,0) (8,00) NO. QUANTITY PART NUMER POS. PER TUE CD08RM0A 8 60 CD0RM0A 0 60 CD0CM0A 0 60 CD6RM0A 6 60 CD6CM0A (0,5).00 (5,08).05 (0,6).8 (,5).8 (,6) TYP..00 (,5) C.00 (5,08).05 (0,6).00 TYP. (0,5) Surface Mount NO. QUANTITY PART NUMER POS. PER TUE CD0RM0S.00 (,5) C (8,00) 8 C.00.5 (5,08) (8,00).050 (,7) TYP..080 (,0) 8 C C.0 (0,9).00 TYP. (,5).00 (5,08) CD08RM0S 8 60 CD0RM0S 0 60 CD0CM0S 0 60 CD6RM0S 6 60 CD6CM0S 6 60 Note: For tape and reel packaging, add R to end of part number..00 THK. (0,5).00 TYP. (,0).90 (9,90) (,7) (0,5).00 TYP. (0,5) H Dimensions are shown: Inch (mm)

32 8 SWITCH FUNCTION CD Series 8mm DIP Coded Rotary Switches CD08R 8 POSITION, CD ACTUATOR COLOR: WHITE H POS. C PIN INDICATOR 7 XX C&K CD DIP Switches ship and to be solder processed in position 0 CD0R 0 POSITION, CD ACTUATOR COLOR: WHITE CD0C 0 POSITION, CD COMPLEMENT ACTUATOR COLOR: LACK POS. C POS. C PIN INDICATOR XX C&K CD Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position 7 CD6R 6 POSITION, HEXADECIMAL ACTUATOR COLOR: WHITE CD6C 6 POSITION, HEXADECIMAL COMPLEMENT ACTUATOR COLOR: LACK POS. C A C D E F POS. C A C D E F PIN INDICATOR C A XX D EF C&K CD 5 6 Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position F ACTUATOR M0 (STD.) FLUSH WITH SCREWDRIVER SLOT.00 (,5) TYP. (0,6) FLUSH ACTUATOR NOTE: Designed for #0 Phillips screwdriver. H Dimensions are shown: Inch (mm)

33 CD Series 8mm DIP Coded Rotary Switches TERMINATIONS H DIP C S PC, THRU-HOLE A.00 (,5).05 TYP (0,6) C D C A EF 9 SURFACE MOUNT.00 (,5) C (8,0).05 (7,75) 5.00 (7,6).5 (8,00) 8 C.00 (,5) 8 C.00.5 (5,08) (8,0).05 (0,6).68 (,7).5 TYP (,8).00 TYP (0,5).00.5 (5,08) (8,00).050 (,7) TYP. 8 C C.00 (7,6).00 TYP (0,5).080 (,0) 8 C C.0 (0,9).00 TYP. (,5).0 TYP. (0.8).00 TYP. (,5).00 (5,08) RIGHT ANGLE, PC THRU-HOLE Ø.0 (0,8) TYP. 8 C C.00 (5,08).0 (8,6) 8.00 (0,5).00 (5,08).05 (0,6).8 (,5).00 TYP. (,5).05 TYP. (0,6) STAND-OFF.099 (,5).8 (,6) TYP..00 (,5).050. (,7) (8,0) 8 7 C 6.00 (5,08) 5.5 (8,00).05 (0,6).00 TYP. (0,5).00 THK. (0,5).00 TYP. (,0).90 (9,90) (,7) (0,5).00 TYP. (0,5) CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATILE* CONTACT MATERIAL TERMINAL PLATING YES YES GOLD GOLD LOW LEVEL/DRY CIRCUIT RATING 0. VC 0 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. TAPE & REEL For part number CDxxM0S FEED DIRECTION.57 (,0).60 (6,0).079 (,0).059 DIA (,5Ø).069 (,8).9 (,9).5 (8,5).95 (,0) Reel Information Outside diameter.00 (,0) Pilot hole.5 (,0).0 (0,) H Dimensions are shown: Inch (mm)

34 CRD Series 0mm DIP Coded Rotary Switches Features/enefits Process sealed withstands soldering and cleaning Thru-hole and surface mount models Crisp, positive detent ensures actuation Computer and peripherals RoHS compliant Typical Applications Address switching applications Data storage devices Computer and peripherals Instrumentation H DIP Specifications CONTACT RATING: 0. V AC, DC 0 V max. ELECTRICAL LIFE: 0,000 steps 5 V DC 0 ma. MECHANICAL LIFE: 0,000 steps min. CONTACT RESISTANCE: 00 milliohms max. V DC 0 ma. INSULATION RESISTANCE: 000 megohms 00 V DC DIELECTRIC STRENGTH: 00 V AC for minute. OPERATING TEMPERATURE: -0 C to 85 C. STORAGE TEMPERATURE: -0 C to 85 C. OPERATING FORCE: 000 grams max. PACKAGING: Switches supplied in anti-static tubes in full quatities only. This may affect order quantity. Surface mount models with MO actuators available in tape and reel, 500 pieces per reel. Materials COVER: PPS (black) HOUSING: PPS (black) ACTUATOR: PA 6T M0 actuator option; PT L and W actuator option. CONTACTS: eryllium Copper with Gold over Nickel plate TERMINALS: rass with Gold Nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order The uild-a Switch concept allows you to mix and match options to create the switch you need. elow is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. C R D Switch Function CRD0R 0 position, CD CRD0C 0 position, CD complement CRD6R 6 position, Hexadecimal CRD6C 6 position, Hexadecimal complement Actuator M0 Flush, screwdriver slot L* Extended, screwdriver slot W* Wheel Packaging (None) Tube R Tape & Reel (M0 actuator only) Terminations A Right angle, PC thru-hole C PC Thru-hole S Gull wing Contact /Terminal Material Gold/Gold * Note - L and W actuators are not available in termination S H 5 Dimensions are shown: Inch (mm)

35 CRD Series 0mm DIP Coded Rotary Switches SWITCHES WITH STANDARD OPTIONS H DIP PC Mount C (0,0) 8 C.9 (0,0) C 8 C.00 (7,6).00 (,5).0 TYP. (0,8) NO. QUANTITY PART NUMER POS. PER TUE CRD0RM0C 0 5 CRD6RM0C (0,5).6 (6,0).00 (7,6).6 (,7) Ø.00 (,0).00 (,5).0 (8,).0 TYP..00 (0,6) (,5) Right Angle Mount.97 (5,0).7 (,0).97 (5,00) NO. QUANTITY PART NUMER POS. PER TUE CRD0RM0A 0 5 CRD6RM0A (5,08) 8 C 8 C.00 (0,5).7 (5,5).00 (,5).8 (,5).00 (,5) (8,) 6.0 TYP..00 (0,6) (,5).00 (5,08).0 TYP. (0,8) Surface Mount C (0,0) 8 C.9 (0,0).00 (,5) TYP..0 (0,9) 8 C C.0 (6,0).050 (,7) NO. QUANTITY PART NUMER POS. PER TUE CRD0RM0S 0 5 CRD6RM0S (0,5) TYP..0 (0,8).6 (6,0).05 (0,9).66 TYP. (9,).00 (0,5) Ø.00 (,0).00 (,5).0 (8,).0 TYP. (0,6).00 (,5) H 6 Dimensions are shown: Inch (mm)

36 SWITCH FUNCTION CRD Series 0mm DIP Coded Rotary Switches CRD0R 0 POSITION, CD ACTUATOR COLOR: RED CRD0C 0 POSITION, CD COMPLEMENT ACTUATOR COLOR: ORANGE H DIP POS. C POS. C Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position 7 PIN INDICATOR 8 7 XX C&K CRD0R CRD6R CRD6C 6 POSITION, HEXADECIMAL ACTUATOR COLOR: LACK 6 POSITION, HEXADECIMAL COMPLEMENT ACTUATOR COLOR: WHITE POS. C A C D E F POS. C A C D E F PIN INDICATOR XX A C D E 9 F C&K CRD6R Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position F ACTUATOR L* W* (STD.) FLUSH WITH SCREWDRIVER SLOT EXTENDED WITH SCREWDRIVER SLOT WHEEL.09 (,0) FEDCA9.57 (,0) 6 5 FLUSH ACTUATOR Ø.57 (,00) 0.76 (7,0) 0.09 (,0).09 (,0) 0.8 (,0) NOTE: Designed for #0 Phillips screwdriver. * L and W actuators are not available in termination S Dimensions are shown: Inch (mm) H 7

37 CRD Series 0mm DIP Coded Rotary Switches TERMINATIONS C PC, THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE H DIP.00 (0,5) S C (0,0).00 (7,6) SURFACE MOUNT 8 C.6 (,7).9 (0,0).6 (6,0) Ø.00 (,0).00 (,5) C.00 (7,6).0 (8,) 8 C.00 (,5).0 TYP. (0,8).0 TYP..00 (0,6) (,5).97 (5,0).00 (5,08).7 (,0) 8 C 8 C.00 (5,08).00 (0,5).97 (5,00).7 (5,5).00 (,5).0 TYP. (0,8).8 (,5).00 (,5) (8,) TYP..00 (0,6) (,5) C (0,0) 8 C.9 (0,0).00 (,5) TYP..0 (0,9) 8 C C.0 (6,0).050 (,7).00 (0,5) TYP..0 (0,8).6 (6,0).05 (0,9).66 TYP. (9,).00 (0,5) M0 Ø.00 (,0).00 (,5).0 (8,).0 TYP. (0,6).00 (,5) CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATILE* CONTACT MATERIAL TERMINAL PLATING YES YES GOLD GOLD LOW LEVEL/DRY CIRCUIT RATING 0. VC 0 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. TAPE & REEL.58 (,0).60 (6,0).079 (,0).059 DIA (,5).069 (,8).5 (8,0).95 (,0) FEED DIRECTION H 8 Dimensions are shown: Inch (mm)

38 Snap-acting Product Selection Guide Snap-acting Series TF TFS TF TM LC LCA LCS Switch Type Poles/Throws Miniature SPST, SPDT Sealed Miniature SPDT Sealed Miniature SPDT Miniature SPST, SPDT Subminiature Precision SPST, SPDT Subminiature SPDT Sealed Subminiature SPST Maximum Current Amps 0 Amps 0 Amps 5 Amps 0. Amps 0 Amps 6 Amps Terminations Solder Turret Quick Connect Screw Wire Leads J PC Formed PC Snap-acting Extended Operations Sealed Page No. J 6 J- / J-6 J-6 J J-0 J 6 J 0 Snap-acting Series MM ZM ZMA ZM ZMS ZMSM MDS H Switch Type Subminiature Precision Subminiature Subminiature Subminiature Sealed Subminiature Sealed Subminiature Subminiature Standard Precision Poles/Throws SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPST, SPDT Maximum Current 7 Amps Amps Amps 0. Amps Amps Amps 00 m Amps 0 Amps Terminations Solder Quick Connect Wire Leads Screw PC Thru-hole Flat & Step ase ushing Sealed 5/- Page No. J J 7 J 50 J 5 J 57 J-6 J 65 J-7 Dimensions are shown: Inch (mm) J

39 Snap-acting Product Selection Guide Snap-acting Series A TL DS LC Switch Type Poles/Throws Maximum Current General Purpose SPST, SPDT, DP 0. Amps Door Interlock SPDT 5 Amps Door Interlock SPDT DPDT 0., 0, 6A Subminiature SPST SPDT 5A Terminations Solder Quick Connect Wire Leads Screw PC Thru-hole Flat & Step ase ushing /8- J Page No. J 77 J-8 J-85 J-88 Snap-acting J Dimensions are shown: Inches (mm)

40 Snap-acting Technical Data HOW TO CHOOSE PRECISION SNAP-ACTING SWITCHES AND ACTUATORS This catalog describes electric switches that satisfy the following definition: A precision snap-acting switch is a mechanically operated electric switch having predetermined and accurately controlled characteristics and having contacts other than blade-and-jaw, or mercury-type, where the maximum separation between any butting contacts is /8 inch. In choosing a switch, the first thing to consider is its electrical rating. As a basic part of an electric control system, the switch must be able to carry the full load current in the system, to interrupt this current, and to handle any surge of current that may occur when the switch contacts close or any transients that occur when contacts open. The method of applying mechanical force to operate the switch influences the choice of actuator. asic switches are provided with leaf spring, levers, or other linkages between the switch plunger and the actuating device, which are typically used to provide additional overtravel and reduce the operating force. The differential travel measured at the free end of the leaf or lever is considerably greater than that measured at the switch plunger and max. operating force is adequately smaller. Table relates types of actuators to means of applying operating force. ACTUATOR MOTION OF APPLIED OPERATING FORCES Reverse-Acting Overtravel Roller Roller Hinged Hinged Reverse-Acting Hinged Pin Plunger Plunger Leaf Leaf Lever Roller Lever Hinged Lever Roller Lever asic D, Q, J R L W T A Y F CAM Rotary LEVER Angular J Snap-acting SLIDE Wedge PLUNGER In-Line I-METAL or ELLOWS Slow In-Line Suitable for this actuating method. Where large overtravel is required. Do not use when there is side thrust. Use only where the actuating device contains provisions for absorbing excess over travel. ELECTRICAL LIFE CHARACTERISTICS FOR SNAP-ACTING SWITCHES The primary limitation to electrical life of a switch is wear of the contacts. In general, contacts wear out more quickly as current or voltage is increased and as power-factor is decreased. This is indicated by the graph below, which shows electrical life of switches tested under ordinary atmospheric conditions, operated 60 times a minute, with AC power handled on both the normally open and the normally closed contacts. The high inrush current encountered in lamp loads and in motor or other inductive loads is responsible for decreased contact life under such loading. 0 TYPICAL ELECTRICAL LIFE OF TYPE H SWITCH 5 Amperes 0 50 V AC, RESISTIVE 50 V AC, 0.5 P.F. 5 V AC, RESISTIVE 5 V AC, 0.5 P.F Millions of Operations J Dimensions are shown: Inch (mm)

41 Snap-acting Technical Data MECHANICAL LIFE CHARACTERISTICS FOR SNAP-ACTING SWITCHES Fatigue of the internal spring blade is the limiting factor in the mechanical life of a switch. This fatigue can often be reduced and the life thereby extended, by reducing overtravel. One method is to use a leaf or lever actuator or a plunger containing an overtravel-absorbing spring. Tests on switches of the types covered in this catalog indicate that the mechanical life of a lever actuated switch is more than double that of a switch having the operating force applied directly on the pin. Mechanical life is also affected by the combination of total travel and operating force. Thus a high-sensitivity switch which has small travel and light force, has about twice the life expectancy of a high current type switch, in which the travel/ force combination is relatively high. Experience indicates that million of operations is a reasonable mechanical life expectancy for a basic snap switch. For the best mechanical life, the applied overtravel force should not exceed three times the operating force. AC RATINGS FOR SNAP-ACTING SWITCHES Switches used to control alternating current loads, up to the ratings shown in this catalog, will maintain repeatability of characteristics and provide long electrical life (refer to graph on page K-). In special circumstances, higher currents or voltages may be controlled, but changes in performance must be anticipated. Switches used to control dry circuits can be furnished, but factory recommendations should be secured. DC RATINGS FOR SNAP-ACTING SWITCHES To use the table below, determine the contact separation of the switch and select the ratings from the appropriate line. The maximum current rating must be limited to the current value listed for that switch type in the body of the catalog. ACTUATOR INDUCTIVE J CONTACT SEPARATION Inches.00 DIRECT CURRENT VOLTAGE Volts Heater Load Lamp Load (tungsten) Normally Normally Normally Normally Open Closed Open Closed Contact Contact Contact Contact Amperes Amperes Amperes Amperes Motor, Relay, or Solenoid Load Sea Level ,000 Feet Normally Normally Normally Normally Open Closed Open Closed Contact Contact Contact Contact Amperes Amperes Amperes Amperes Snap-acting J 5 Dimensions are shown: Inches (mm)

42 TF Series Miniature Snap-acting Switches Features/enefits road range of operating forces Ratings up to AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics Portable tools J Specifications CONTACT RATING: From low level* to 77 V AC. ELECTRICAL LIFE: 00,000 cycles at 0 50 V AC, consult Customer Service Center for typical life of higher rated switches. INSULATION RESISTANCE:,000 M ohm min. DIELECTRIC STRENGTH:,500 Vrms sea level. OPERATING TEMPERATURE: 0ºF to 85ºF ( 0ºC to 85ºC). OPERATING FORCE: From 5 to 00 grams at actuator button available. MOUNTING: Torque screws -5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. Standard electrical life per UL 05, rated for 6,000 operations. Materials SWITCH HOUSING: Thermoplastic (UL 9V-0). ACTUATOR UTTON: Thermoplastic (UL 9V-0). SPRING: Copper alloy. PIVOT: rass alloy. MOVALE CONTACTS: Gold alloy for ratings AMP or less. Fine silver for ratings greater than AMP up to 5 AMPS. Precious metal alloy for ratings greater than 5 AMPS. STATIONARY CONTACTS: Gold alloy for ratings AMP or less. Fine silver for ratings greater than AMP. TERMINALS: rass alloy for ratings up to 0 AMPS. Copper alloy for ratings greater than 0 AMPS. NOTE: Specifications and materials listed above are switches with standard options. For information on specific and custom switches, consult Customer Service Center. Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-6 through J-. For additional options not shown in catalog, consult Customer Service Center. T F Series TF SP, Mom. Operating Force CJ 5.9 oz./50 grams CC.5 oz./5 grams CD.88 oz./5 grams CF.76 oz./50 grams CG.65 oz./75 grams EC 7.9 oz./5 grams EE. oz./00 grams Electrical Rating J6 5 A, 77 V AC; / HP, 5, 50 V AC; 5 A, 5 V AC L, 0.5 A, 5 V DC; 0.5 A, 50 V DC F5 A,5 V AC; A, O V DC H8 5 A, 77 V AC; /0 HP, 5, 50 V AC J A, 77 V AC; HP, 5 V AC; HP, 50 V AC; 5 A, 5 V AC L K6 A, 77 V AC; / HP, 5, 50 V AC; 0.5 A, 5 V DC; 0.5 A, 50 V DC L 0 A, 50 V AC; HP, 5 V AC; HP 50 V AC Mounting Style S Standard V Metric Actuator P00 Pin plunger A0.8" lever roller, high force A5." lever roller, high force A0.05 lever roller, low force A5.56" lever roller, low force T0.8" lever, high force T." simulated roller, high force T.9" simulated roller, high force T5.0" lever, high force T6." lever, high force T8.75" lever, high force T0.0" lever, low force T.56" simulated roller, low force T.50 simulated roller, low force T5.6" lever, low force T6.57" lever, low force T8.97 lever, low force WP0 Wide pin plunger Terminations 0.87" quick connect A.50" quick connect 5A.50" offset quick connect 5.87" offset quick connect Circuitry C SPDT W SPST N.C. Y SPST N.O. J 6 Dimensions are shown: Inch (mm)

43 TF Series Miniature Snap-acting Switches TF MINIATURE SNAP-ACTING SWITCHES SP MOMENTARY SERIES. (8,8) 0.7 (8,7) OPERATING FORCE OPTION CODE ASIC SWITCH OPERATING FORCE (OZ./GRAMS) CC.5 5 CD.88 5 J CF CG CJ EC EE*. 00 Snap-acting *Minimums may apply, consult Customer Service Center. Operating Force option CC not available with T8 & T6 Actuator options. Operating force varies with actuator option, see ACTUATOR option section. ELECTRICAL RATING CONTACT MATERIAL OPTION CODE RoHS COMPLIANT * RoHS COMPATILE * MOVALE CONTACT STATIONARY CONTACT ELECTRICAL RATING F5 Yes Yes Gold alloy Gold alloy From low level* to 5 V AC, 0 V DC. H8 Yes Yes 5 77 V AC; /0 5 & 50 V AC. J Yes Yes J6 Yes Yes Fine Silver Fine Silver 77 V AC; 5 V AC; 50 V AC; 5 5 V AC L V AC; / 5 & 50 V AC; 5 5 V AC L V DC; V DC. K6 Yes Yes 77 V AC; / 5 & 50 V AC; V DC; V DC. L Yes Yes Silver alloy 0 50 V AC; 5 V AC; 50 V AC * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. All models Consult Customer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. J 7 Dimensions are shown: Inches (mm)

44 TF Series Miniature Snap-acting Switches ELECTRICAL RATING OPERATING FORCE ELECTRICAL AMPS CC CD CF CG CJ EC EE RATING (REF.) (5) (5) (50) (75) (50) (5) (00) F5 H8 5 J X X X X J6 5 X X X X K6 X L 0 X X X X AVAILALE x NOT AVAILALE ** Available with A & 5A terminations only, see page J-0. J Snap-acting All models Consult Customer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. MOUNTING STYLE S STANDARD For -0 screw size V Metric For mm screw size J 8 Dimensions are shown: Inch (mm)

45 TF Series Miniature Snap-acting Switches ACTUATOR OPTION CODE FIG. DIM. A DIM. DIM. C DIM. D P00.80 (0,).578 ±.05 (,68 ± 0,8) A0.8 (0,6). (8,).80 ±.00 (0,57 ± 0,5).9 dia. (,8Ø) A5. (,0). (8,).80 ±.00 (0,57 ± 0,76).9 dia. (,8Ø) A0.05 (6,7) A5.56 (9,6).5 (,7).5 (,7).80 ±.050 (0,57) ±,7.80 ±.075 (0,57 ±,9).9 dia. (,8Ø).9 dia. (,8Ø) T0 T5.8 (,).0 (5,6). (8,). (8,).600 ±.00 (5, ± 0,5).600 ±.00 (5, ±,0) T6. (59,). (8,).600 ±.065 (5, ±,65) T8 T0.75 (69,9).0 (7,9). (8,).5 (,7).600 ±.080 (5, ±,0).600 ±.050 (5, ±,7) T5 T6 T8 T T T T WP0 5.6 (,).57 (65,).97 (75,). (,0).9 (,8).56 (9,6).50 (8,).80 (0,).5 (,7).5 (,7).5 (,7). (8,). (8,).5 (,7).5 (,7).600 ±.070 (5, ±,78).600 ±.50 (5, ±,8).600 ±.87 (5, ) ±,75.80 ±.00 (0,57 ±0,76).70 ±.00 (8,5 ± 0,76).80 ±.065 (0,57 ±,65).70 ±.060 (8,5) ±,5.65 ±.05 (6, ± 0,8).9 dia. (,8Ø).9 dia. (6,Ø).9 dia. (,8Ø).5 dia. (6,Ø) J Snap-acting NOTE: Switch characteristics chart on following page. J 9 Dimensions are shown: Inches (mm)

46 TF Series Miniature Snap-acting Switches ACTUATOR SWITCH CHARACTERISTICS OPTION CODE MAXIMUM OPERATING FORCE (OZ./GRAMS) CC CD CF CG CJ EC EE (5) (5) (50) (75) (50) (5) (00) MINIMUM RELEASE FORCE (OZ./GRAMS) CC CD CF CG CJ EC EE (5) (5) (50) (75) (50) (5) (00) MAXIMUM DIFFERENTIAL TRAVEL ALL FORCES MAXIMUM PRETRAVEL ALL FORCES MINIMUM OVERTRAVEL ALL FORCES A (0,8).060 (,5).00 (0,76) A (0,76).00 (,5).065 (,65) A (0,6) 0. (,05) (,0) A (,7).50 (6,5).0 (,05) P (0,5).07 (,9).050 (,7) T (0,8).060 (,5).00 (0,76) T (0,76).00 (,5).065 (,65) T (0,76).00 (,5).060 (,5) J T5 T (0,76).05 (,).0 (,79).50 (6,5).065 (,65).5 (,8) Snap-acting T8 T0 T T T5 N/A N/A (,57).00 (0,76).050 (,7).005 (,7).055 (,0).00 (7,6).0 (,56).50 (6,5) 0. (5,8).50 (6,5).55 (,9).060 (,5).0 (,05) 0. (.79).5 (,8) T6 T8 N/A N/A N/A N/A N/A N/A N/A N/A (,5) 0. (,05).500 (,70) (.).5 (5,97) 0.85 (7,) WP (0.5).07 (,9).00 (0,5) NOTE: For basic switch operating forces, see page J-6. HIGH FORCE, LOW MOTION PIVOT POSITION LOW FORCE, HIGH MOTION PIVOT POSITION Available with actuators A0, A5, T0, T, T, T5, T6 and T8. Available with actuators A0, A5, T0, T, T, T5, T6, and T8. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. J 0 Dimensions are shown: Inch (mm)

47 TF Series Miniature Snap-acting Switches TERMINATIONS 0.87" QUICK CONNECT A.50" QUICK CONNECT 5A OFFSET.50" QUICK CONNECT 5 OFFSET.87" QUICK CONNECT J Snap-acting CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) J Dimensions are shown: Inches (mm)

48 TFS Series Splash Proof Miniature Snap-acting Switches Features/enefits Reliable snap action mechanism Low cost - high performance RoHS compatible Typical Applications Alarm devices / Home security Air conditioner Food processor Water heaters Industrial Forklifts UL6058- J Snap-acting Specifications CONTACT RATING / ELECTRICAL LIFE: 5/50 V AC / 0,000 operations 5/50 VAC / 0,000 operations 5/50 VAC / 0,000 operations 5/50 VAC / 0,000 operations ELECTRICAL OPERATING FREQUENCY: 0-0 operations per min. MECHANICAL LIFE:,000,000 operations MECHANICAL OPERATING FREQUENCY: 0 operations per min. INSULATION RESISTANCE: (at 500 VDC/minute) 00 M ohm min. DIELECTRIC STRENGTH: 500 VAC (50-60 Hz) OPERATING TEMPERATURE: 0ºC to 85ºC (with no icing) OPERATING FORCE: 00 grams. Materials CASE: Nylon COVER: PT ACTUATOR: PT MOVALE CONTACTS: Silver alloy TERMINALS: rass LEVER: Stainless steel WIRE: PVC+CU NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J- thru J-5. For additional options not shown in catalog, consult Customer Service Center. T F S S 0 Electrical Rating OPERATING FORCE ELECTRICAL AMPS S D J L H RATING (GRAMS) (00) (50) (00) (50) (00) 0 0. Circuit Arrangement C SPDT Y SPST N.O. W SPST N.C. Mounting Hole Size NONE. mm ( mm screw clearance hole) S.9 mm (-0 screw clearance hole) X X X Available X Not available Operating Force S 00 grams D 50 grams J 00 grams L 50 grams H 00 grams Actuator Lever Fixed P00 utton T0 Lever - high force T0 Lever - low force A05 Lever roller - High force, short lever A0 Lever roller - high force A0 Lever roller - low force A5 Lever roller - Low force, short lever Terminal Type 0.87 quick connect J

49 TFS Series Splash Proof Miniature Snap-acting Switches SERIES TFS SU-MINIATURE SNAP-ACTING SWITCHES 0. REF. -#87 QUICK CONNECT TERMINAL 0.5 TYP TYP REF ELECTRICAL RATING OPTION CODE RoHS RoHS COMPLIANT COMPATILE ELECTRICAL RATING 0 Yes Yes 5/50 V AC / 0,000 operations 06 Yes Yes 5/50 VAC / 0,000 operations 0 Yes Yes 5/50 VAC / 0,000 operations 0 Yes Yes 5/50 VAC / 0,000 operations J Snap-acting OPERATING FORCE OPTION CODE S D J L H ASIC SWITCH OPERATING FORCE 00 GRAMS 50 grams 00 grams 50 grams 00 grams Third Angle Projection J

50 TFS Series Splash Proof Miniature Snap-acting Switches ACTUATOR P00 UTTON T0 LEVER, HIGH FORCE T0 LEVER, LOW FORCE A A A FP.7 FP OP FP OP Measure at Point A Measure at Point A Measure at Point A Max. operating force 00 grams Max. operating force 60 grams Max. operating force 90 grams J Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 0 grams.7 ± 0. mm 0. mm.0 mm. mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 5 grams 5. ± 0.6 mm 0.6 mm. mm.6 mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 0 grams 5 ±. mm. mm. mm 5. mm Snap-acting A05 LEVER ROLLER HIGH FORCE, SHORT LEVER A 0.9 A0 LEVER ROLLER HIGH FORCE A 9.9 A0 LEVER ROLLER LOW FORCE A FP OP FP OP Measure at Point A Measure at Point A Measure at Point A Max. operating force 00 grams Max. operating force 0 grams Max. operating force 70 grams Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0.6 ± 0.5 mm 0.5 mm.0 mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ± 0.7 mm 0.7 mm. mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ±. mm. mm.5 mm Max. pre-travel PT. mm Max. pre-travel PT. mm Max. pre-travel PT 6.5 mm J

51 TFS Series Splash Proof Miniature Snap-acting Switches ACTUATOR A5 LEVER ROLLER LOW FORCE, SHORT LEVER A Measure at Point A 7.8 Max. operating force 50 grams 6.6 Min. release force 5 grams Operating position OP Max. movement differential Min. over travel OT 0. ± 0.9 mm 0.9 mm. mm Max. pre-travel PT. mm TERMINAL TYPE 0.87 QUICK CONNECT 0. REF. -#87 QUICK CONNECT TERMINAL 0.5 TYP J TYP.75 REF Snap-acting CIRCUITRY C Y W SPDT (Single Pole, Double Throw) SPST N.O. (Single Pole, Single Throw, Normally Open) SPST N.C. (Single Pole, Single Throw, Normally Closed) MOUNTING HOLE SIZE NONE. mm (mm SCREW CLEARANCE HOLE) S.9 mm (-0 SCREW CLEARANCE HOLE) Third Angle Projection J 5

52 TFS Series Sealed Miniature Snap-acting Switches (Water Proof) Features/enefits IP67 Reliable snap action mechanism Low cost - high performance RoHS compatible Typical Applications Alarm devices / Home security Air conditioner Food processor Water heaters Industrial Forklifts UL6058- J Snap-acting Specifications CONTACT RATING / ELECTRICAL LIFE: 5/50 V AC / 0,000 operations 5/50 VAC / 0,000 operations 5/50 VAC / 0,000 operations 5/50 VAC / 0,000 operations ELECTRICAL OPERATING FREQUENCY: 0-0 operations per min. MECHANICAL LIFE:,000,000 operations MECHANICAL OPERATING FREQUENCY: 0 operations per min. INSULATION RESISTANCE: (at 500 VDC/minute) 00 M ohm min. DIELECTRIC STRENGTH: 500 VAC (50-60 Hz) OPERATING TEMPERATURE: see wire type OPERATING FORCE: 00 grams. Materials CASE: Nylon COVER: PT ACTUATOR:PT MOVALE CONTACTS: Silver alloy. TERMINALS: rass. LEVER: Stainless steel WIRE: PVC+CU NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-7 thru J-9. For additional options not shown in catalog, consult Customer Service Center. T F S S W Electrical Rating see chart below Operating Force S 00 grams D 50 grams J 00 grams L 50 grams Actuator Lever Fixed H 00 grams P00 utton T0 Lever - high force T0 Lever - low force A05 Lever roller - WIRE TYPE High force, short lever A0 Lever roller - high force ELECTRICAL AMPS C D E F G AWG A0 Lever roller - low force RATING 6AWG 8AWG 0AWG AWG H 6AWG A5 Lever roller Low force, short lever 0 X X Terminal Type W Wire Circuit Arrangement C SPDT Y SPST N.O. W SPST N.C. Wire Type C 6 AWG D 8 AWG E 0 AWG F AWG G AWG H 6 AWG Wire UL # UL05 (T55) OPERATING TEMPERATURE Mounting Hole Size NONE. mm ( mm screw clearance hole) S.9 mm (-0 screw clearance hole) 06 6 X X X 0 0 X X X X -0 C to + 85 C (with UL05 wire) Available X Not available J 6

53 TFS Series Sealed Miniature Snap-acting Switches (Water Proof) SERIES TFS SU-MINIATURE SNAP-ACTING SWITCHES WATERPROOF 0. REF COM : LACK / UL05 6AWG OR EQUIVALENT NC : RED / UL05 6AWG OR EQUIVALENT NO : LUE / UL05 6AWG OR EQUIVALENT OPTION CODE RoHS RoHS COMPLIANT COMPATILE ELECTRICAL RATING ELECTRICAL RATING 0 Yes Yes 5/50 V AC / 0,000 operations 06 Yes Yes 5/50 VAC / 0,000 operations 0 Yes Yes 5/50 VAC / 0,000 operations J Snap-acting 0 Yes Yes 5/50 VAC / 0,000 operations OPERATING FORCE OPTION CODE S D J L H ASIC SWITCH OPERATING FORCE 00 GRAMS 50 grams 00 grams 50 grams 00 grams Third Angle Projection J 7

54 TFS Series Sealed Miniature Snap-acting Switches (Water Proof) ACTUATOR P00 UTTON T0 LEVER, HIGH FORCE T0 LEVER, LOW FORCE A A A FP.7 FP OP FP OP Measure at Point A Measure at Point A Measure at Point A Max. operating force 00 grams Max. operating force 60 grams Max. operating force 90 grams J Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 0 grams.7 ± 0. mm 0. mm.0 mm. mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 5 grams 5. ± 0.6 mm 0.6 mm. mm.6 mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 0 grams 5 ±. mm. mm. mm 5. mm Snap-acting A05 LEVER ROLLER HIGH FORCE, SHORT LEVER A 0.9 A0 LEVER ROLLER HIGH FORCE A 9.9 A0 LEVER ROLLER LOW FORCE A FP OP FP OP Measure at Point A Measure at Point A Measure at Point A Max. operating force 00 grams Max. operating force 0 grams Max. operating force 70 grams Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0.6 ± 0.5 mm 0.5 mm.0 mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ± 0.7 mm 0.7 mm. mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ±. mm. mm.5 mm Max. pre-travel PT. mm Max. pre-travel PT. mm Max. pre-travel PT 6.5 mm Third Angle Projection J 8 Dimensions are shown: (mm)

55 TFS Series Sealed Miniature Snap-acting Switches (Water Proof) ACTUATOR A5 LEVER ROLLER LOW FORCE, SHORT LEVER A Measure at Point A 7.8 Max. operating force 50 grams 6.6 Min. release force 5 grams Operating position OP Max. movement differential Min. over travel OT 0. ± 0.9 mm 0.9 mm. mm Max. pre-travel PT. mm TERMINAL TYPE W WIRE UL05 J C Y W SPDT (Single Pole, Double Throw) SPST N.O. (Single Pole, Single Throw, Normally Open) SPST N.C. (Single Pole, Single Throw, Normally Closed) CIRCUITRY Snap-acting WIRE TYPE C D E F G H 6 AWG 8 AWG 0 AWG AWG AWG 6 AWG MOUNTING HOLE SIZE NONE. mm (mm SCREW CLEARANCE HOLE) S.9 mm (-0 SCREW CLEARANCE HOLE) Third Angle Projection J 9 Dimensions are shown: (mm)

56 TF Series Miniature Snap-acting Switches Features/enefits road range of operating forces Ratings up to 0 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics Portable tools Air Conditioner J Specifications CONTACT RATING: From low level* to 0 V AC. ELECTRICAL LIFE: 0,000 cycles MECHANICAL LIFE:,000,000 cycles at 0.A and 6A 00,000 cycles at 0A INSULATION RESISTANCE:,000 M ohm min. DIELECTRIC STRENGTH:,500 Vrms sea level. OPERATING TEMPERATURE: 0ºC to 5ºC ( 0ºC to 85ºC). OPERATING FORCE: From 8 to 0 grams at actuator button available. MOUNTING: Torque screws -5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. Standard electrical life per UL 05, rated for 6,000 operations. Materials SWITCH HOUSING: Nylon 6/6 ACTUATOR UTTON: Nylon 6/6 SPRING: Stainless Steel PIVOT: rass Alloy MOVALE CONTACTS: See electric rating page J- MOVALE LADE: ecu STATIONARY CONTACTS: See electric rating page J- TERMINALS: rass Alloy NOTE: Specifications and materials listed above are switches with standard options. For information on specific and custom switches, consult Customer Service Center. Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J- through J-5. For additional options not shown in catalog, consult Customer Service Center. T F Series TF SP, Mom. Operating Force CC 8 grams CF 5 grams CG 75 grams CH 0 grams CJ 70 grams EC 0 grams EE 0 grams Electrical Rating Chart OPTION CODE F5 H8 K A 5/50 V AC (T85) Min. 0,000 operations 6A 5/50 V AC (T85) Min. 0,000 operations 0A 5/50 V AC (T85) Min. 0,000 operations 0.A 5/50 V AC µt5, E 6A 5/50 V AC µt5, E 0()A 5/50 V AC µt5, E * Note: No UL & ENEC 5 safety for Termination option 60 Mounting Style S Standard V Metric Actuator P00 Pin plunger A0 Lever roller.5 mm A5 Lever roller 5.9 mm A0 Lever roller.5 mm A5 Lever roller 5.9 mm T0 Lever mm T Simulated roller.5 mm T5 Lever 7.5 mm T6 Lever.7 mm T7 Lever 5 mm T0 Lever mm T Simulated lever.5 mm T5 Lever 7.5 mm T6 Lever.7 mm T7 Lever 5 mm see chart on following pages for detailed information Terminations 0.87" quick connect A.50" quick connect 5A.50" off set quick connect 5.87" off set quick connect 60 Screw style * 0 Solder Circuitry C SPDT W SPST N.C. Y SPST N.O. J 0

57 TF Series Miniature Snap-acting Switches SERIES TF MINIATURE SNAP-ACTING SWITCHES.09 [7,8].06 [0,].65 [,].0 [,8].795 [0,].0 [,8].66 [5,9].06 [0,].579 [,7] OPERATING POSITION.87 [,] OPERATING FORCE OPTION CODE ASIC SWITCH OPERATING FORCE (grams) CC 8 CF 5 J CG 75 CH 0 CJ 70 Snap-acting EC 0 EE* 0 *Minimums may apply, consult Customer Service Center. ELECTRICAL RATING CONTACT MATERIAL OPTION CODE RoHS COMPLIANT * RoHS COMPATILE * MOVALE CONTACT STATIONARY CONTACT F5 Yes Yes H8 Yes Yes Silver alloy Silver alloy K6 Yes Yes * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. All models Third Angle Projection J Dimensions are shown: inches (mm)

58 TF Series Miniature Snap-acting Switches ELECTRICAL RATING INTERNATIONAL RATING SYMOLS Microgap construction µ (less than mm). ~ T 50E 0E 0() Alternating current. Maximum rated use temperature. Cycles over 50,000 at rated current. Cycles over 0,000 at rated current. Current Rating: First number represents resistive rating; second number represents inductive (motor) rating. OPERATING FORCE ELECTRICAL AMPS CC CF CG CH CJ EC EE RATING (REF.) (8) (5) (75) (0) (70) (0) (0) F5 0. X H8 6 X K6 0 X X X AVAILALE x NOT AVAILALE J Snap-acting All models Consult Customer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. MOUNTING STYLE S STANDARD For -0 screw size V Metric For mm screw size. [,9]. [,9]. [,]. [,].6 [,] TF SWITCH WITH TYPE 0 (.87 QC) TERMINALS AND P00 ACTUATOR SHOWN NOTE: TORQUE MOUNTING SCREWS -5 IN/LS.. [,] TF SWITCH WITH TYPE 0 (SOLDER) TERMINALS AND P00 ACTUATOR SHOWN NOTE: TORQUE MOUNTING SCREWS -5 IN/LS. Third Angle Projection J Dimensions are shown: inches (mm)

59 TF Series Miniature Snap-acting Switches ACTUATOR OPTION CODE P00 A0 A5 A0 A5 T0 T T5 T6 T7 T0 T T5 T6 T7 FIG DIM. A DIM. DIM. C DIM. D DIM. E.795 (0,).8 (0,9).5 (,).05 (6,8).58 (0,).88 (,9).95 (,9).05 (5,69).58 (0,0).708 (.9). (8,).57 (8,8).6 (,).8 (6,00).9 (9,) -. (8,). (8,).56 (,) (,70 0,05) (0,7,7) (0,7,5) (0,7,7) (,) (0,7,) (8,) (5, 0,50) (8,) (8,7,5) (8,) (5,,5) (8,) (5,5,75) (8,) (5,.57) (,) (5,,) (,) (8,8,9) (,) (5,7,) (,) (5,65.8) (,) (5,.8) (.7).06 (,70).65 (,0).8 (,65).66 (9,0).0 (,80).6 (5,50). (5,90).96 (5,0).6 (5,50).0 (5,0). (8,70).8 (9,70).89 (9,90). (,0) -.9 (,8).9 (,8).9 (,8).9 (,8) -.75 ( 7,0) ( 7,0) J Snap-acting NOTE: Switch characteristics chart on following page. Lever Roller DIM. DIM.A DIM.E DIM.D Pin Roller DIM.A DIM.D DIM.C DIM.C FIG. LEVER ROLLER TFXXXXMA50C FIG. PIN ROLLER TFXXXXMP000C Lever DIM. DIM.A DIM.D Simulated Roller DIM. DIM.A DIM.E DIM.D DIM.C DIM.C FIG. LEVER TFXXXXST50C SHOWN FIG. SIMULATED ROLLER TFXXXXST0C J Dimensions are shown: inches (mm)

60 TF Series Miniature Snap-acting Switches ACTUATOR J Snap-acting Lever Type CC CF CG CH CJ EC EE Grams Pre-Travel max. mm OF P00.7 RF T0 T0 T T A0 A0 A5 A5 T7 T7 T6 T6 T5 T5 OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF Max Differential max. mm Over Travel Min. mm HIGH FORCE, LOW MOTION PIVOT POSITION.0 [,7] LOW FORCE, HIGH MOTION PIVOT POSITION.58 [,9] Available with actuators A0, A5, T0, T, T, T5, T6 and T8. Available with actuators A0, A5, T0, T, T, T5, T6, and T8. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. J

61 TF Series Miniature Snap-acting Switches TERMINATIONS 0.87" QUICK CONNECT.6 [,].055 [,] A.50" QUICK CONNECT.8 [6,].55 [].85 [,7].6 [6].00 TYP [0,5].508 [,9].65 [,].06 6 [0,].0TYP [0,8].6 [6,7].098 [,5].69 [5,98] REF 5A.50 OFF SET QUICK CONNECT 5.87 OFF SET QUICK CONNECT.07 TYP [,8]. [0,9].87 [,75].5 [,9].79 [7,09].8 [6,].50 [8,9].0 TYP [0,8].578 [,69].6 [6,7].098 [,5].69 [5,98] REF.8 [6,].50 [8,9].055 TYP [,].578 [,69].0 TYP [0,8]. [5,7].098 [,5].69 [5,98] REF J Snap-acting 60 SCREW STYLE -0 X.5 (,8) TYP. SCREWS & LOCKWASHERS 0 SOLDER.098 [,5] TYP.95 [7,5].95 [7,5].6 [6].0 [0,8].90 [9,9].6 [6].0 TYP [0,8].90 [9,9] CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) J 5 Dimensions are shown: inches (mm)

62 TM Series Miniature Snap-acting Switches Features/enefits road range of operating forces available Wide variety of actuator and terminal styles Cost-effective solution Typical Applications Pumps and motors White goods Consumer appliances J Specifications CONTACT RATING: From low level* to 5 50 V AC. ELECTRICAL LIFE: 50,000 cycles at 5 50 V AC, models with 50 grams operating force. 50,000 cycles at 0 50 V AC, models with 75 grams operating force. INSULATION RESISTANCE:,000 M ohms min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERATING TEMPERATURE: 67ºF to 0ºF ( 55ºC to 50ºC). OPERATING FORCE: 50, 75 and 50 grams at actuator available; refer to chart for lever style forces. MOUNTING: Torque screws -5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. Materials SWITCH HOUSING: Thermoplastic or general purpose phenolic (UL 9V-0). ACTUATOR UTTON: Thermoplastic (UL 9V-0). SPRING: Copper alloy. PIVOT: rass alloy. MOVALE CONTACTS: Gold alloy for ratings 5 V AC or less. Fine silver for ratings greater than 5 V AC. STATIONARY CONTACTS: Gold alloy for ratings AMP or less. Fine silver for ratings greater than AMP. TERMINALS: rass alloy for ratings up to 0 50 V AC. Copper alloy for 5 50 V AC ratings. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-6 through J-. For additional options not shown in catalog, consult Customer Service Center. Available extended electrical life per UL 05, rated for 00,000 operations, consult factory. T M * All models Series TM SP, Mom. Operating Force CG.65 oz./75 grams CJ 5.9 oz.,/50 grams CF.76 oz./50 grams Electrical Rating D6 O 5 & 50 V AC; / 5 & 5O V AC;/ 5 V DC; / 50 V DC G6 5 5 & 50 V AC; / 50 V DC; / 5 V DC; / 5 & 50 V AC; 5 V AC L F5 5 V AC; 0 V DC H 5 50 V AC; /6 5 & 5O V AC Mounting Style S Standard V Metric Actuator P00 Pin plunger A0.8" lever roller, high force A5." lever roller, high force A0.0" lever roller, low force A5.56" lever roller, low force T0.8" lever, high force T." simulated roller, high force T.9" simulated roller, high force T5.0" lever, high force T6." lever, high force T7.00" lever, high force T8.75" lever, high force T0.06" lever, low force T.56" simulated roller, low force T.50" simulated roller, low force T5.6" lever, low force T6.56" lever, low force T7." lever, low force T8.97" lever, low force Terminations 0.87" quick connect 0 Solder A.50" quick connect 60 Screw Circuitry C SPDT W SPST N.C. Y SPST N.O. J 6 Dimensions are shown: Inch (mm)

63 TM Series Miniature Snap-acting Switches SERIES TM MINIATURE SNAP-ACTING SWITCHES SP MOMENTARY OPERATING FORCE OPTION CODE CG CJ CF ASIC SWITCH OPERATING FORCE (OZ./GRAMS) J Snap-acting Operating Force option CF not available with T8, T7 and T8 actuator options. Operating force varies with actuator option, see ACTUATOR option section. ELECTRICAL RATING CONTACT MATERIAL OPTION CODE RoHS COMPLIANT * RoHS COMPATILE * MOVALE CONTACT STATIONARY CONTACT D6 Yes Yes Fine Silver Fine Silver ELECTRICAL RATING 0 5 & 50 V AC; / 5 & 50 V AC; / 5 V DC; / 50 V DC. F5 Yes Yes Gold alloy Gold alloy From low level* to 5 V AC, 0 V DC. 5 5 & 50 V AC; V DC; 0.5 G6 Yes Yes 5 V DC; / 5 & 50 V AC; 5 V AC L. Fine Silver Fine Silver H Yes Yes 5 50 V AC; /6 5 & 50 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. * All models Contact Customer Service Center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. J 7 Dimensions are shown: Inches (mm)

64 TM Series Miniature Snap-acting Switches ELECTRICAL RATING AVAILALE COMINATIONS MAXIMUM OPERATING FORCE (OZ./GRAMS) ELECTRICAL RATING D6 F5 G6 H.76/50.65/75 5.9/50 CF CG CJ x x AVAILALE x NOT AVAILALE * All models Contact Customer Service Center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. J Snap-acting S Standard MOUNTING STYLE V Metric Recommended maximum screw size: -0. Recommended maximum screw size: mm. NOTE: Torque mounting screws -5 in/lbs. J 8 Dimensions are shown: Inch (mm)

65 TM Series Miniature Snap-acting Switches ACTUATOR A D OPTION CODE P00 A0 FIG. DIM. A.80 (0,).8 (0,6) DIM..6 (9,) DIM. C.578 ±.05 (,68 ± 0,8).80 ±.00 (0,57 ± 0,5) DIM. D.9 dia. (,8Ø) C A C A5. (,0).6 (9,).80 ±.00 (0,57 ±,0).9 dia. (,8Ø) A0 A5 T0 T.0 (6,).56 (9,6).8 (,). (,0).58 (,7).58 (,7).6 (9,).6 (9,).80 ±.050 (0,57 ±,7).80 ±.080 (0,57 ±,0).600 ±.00 (5, ± 0,5).80 ±.00 (0,57 ±,0).9 dia. (,8Ø).9 dia. (,8Ø).9 dia. (,8Ø) FIG. Lever Roller A FIG. Pin Roller T T5.8 (,5).0 (5,6).6 (9,).6 (9,).7 ±.050 (8,9 ±,).600 ±.00 (5, ±,0).6 dia. (6,0Ø) C T6. (59,).6 (9,).600 ±.06 (5, ±,57) T7 T8.00 (50,8).75 (69,9).6 (9,).6 (9,).600 ±.05 (5, ±,57).600 ±.09 (5, ±,6) FIG. Lever J T0 T T T5 T6.06 (6,9).56 (9,6).50 (8,).6 (,).56 (65,0).58 (,7).58 (,7).58 (,7).58 (,7).600 ±.05 (5, ±,).80 ±.065 (0,57 ±,65).7 ±.090 (8,80 ±,9).600 ±.080 (5, ±,0).9 dia. (,8Ø).6 dia. (6,0Ø) ±.5 (,7) (5,±.8) A D C Snap-acting T7. (56,) ±.5 (,7) (5,±.8) T8.97 (75,) ±.87 (,7) (5,±.75) FIG. Simulated Roller HIGH FORCE, LOW MOTION PIVOT POSITION LOW FORCE, HIGH MOTION PIVOT POSITION Available with actuators A0, A5, T0, T, T, T5, T6, T7 and T8. Available with actuators A0, A5, T0, T, T, T5, T6, T7 and T8. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. J 9 Dimensions are shown: Inches (mm)

66 TM Series Miniature Snap-acting Switches ACTUATOR SWITCH CHARACTERISTICS OPTION CODE MAXIMUM OPERATING FORCE (OZ./GRAMS) CF CG CJ (50) (75) (50) MINIMUM RELEASE FORCE (OZ./GRAMS) CF CG CJ (50) (75) (50) MINIMUM RETURN FORCE (OZ./GRAMS) CF CG CJ (50) (75) (50) MAXIMUM DIFFERENTIAL TRAVEL ALL FORCES MAXIMUM PRETRAVEL ALL FORCES MINIMUM OVERTRAVEL ALL FORCES T (0,).080 (,0).05 (0,89) T (0,76).60 (,06).065 (,65) T (,7).0 (,56).06 (,57) T (0,8).60 (,06).075 (,90) T (,9). (7,9).0 (,56) T (,57).0 (5,59).0 (,79) T8 N/A N/A..8 8 N/A (,98).75 (9,5).60 (,06) T (0,76).60 (,06).065 (,65) J T T (,78).080 (,0). (7,9). (7,9).5 (,8).0 (,79) Snap-acting T5 T6 T7 T N/A N/A N/A N/A N/A N/A N/A.0 N/A N/A (,78).0 (,79).5 (,8).87 (,75).0 (8,8).500 (,7).500 (,70).750 (9,05).00 (,5).50 (6,5).00 (5,08).80 (7,) A (0,).070 (,78).05 (0,89) A (0,76).60 (,06).065 (,65) A (0,6).0 (,56).060 (,5) A (,78). (7,9).5 (,8) P (0,).056 (,).05 (0,89) NOTE: For basic switch operating forces, see page J-6. Dimensions are shown: Inch (mm) J 0

67 TM Series Miniature Snap-acting Switches TERMINATIONS 0.87" QUICK CONNECT 60 SCREW TERMINALS Torque screws to 6 in. lbs max. Not available with F5 rating option. 0 SOLDER A.50" QUICK CONNECT J Snap-acting Not available with F5 rating option. Not available with F5 rating option. CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) J Dimensions are shown: Inches (mm)

68 LC Series Subminiature Precision Snap-acting Switches Features/enefits Compact design Long life and high electrical capacity Quick connect, wire lead or PC mounting Wide variety of actuator styles Typical Applications Motorized equipment Sump pump Thermostatic controls UL6058- J Specifications CONTACT RATING: From low level* to V AC. ELECTRICAL LIFE: 00,000 cycles INSULATION RESISTANCE:,000 M οηµ min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERATING TEMPERATURE: 7ºF to 85ºF ( 5ºC to 85ºC). OPERATING FORCE: From to 70 grams at actuator button. Forces are less at free end of lever actuators; (see OPERATING FORCE and ACTUATOR option sections). MOUNTING: -56 screws, torque. in/lbs max. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Materials SWITCH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 9V-0). ACTUATOR UTTON: Thermoplastic polyester (UL 9V-0). SPRING: Copper alloy. PIVOT: Copper alloy. MOVALE CONTACTS: Fine silver for ratings greater than 5 V AC. Fine silver with K gold plate for 5 V AC or less. STATIONARY CONTACTS: Fine silver welded on copper alloy for ratings greater than 5 V AC. Gold alloy welded on copper alloy for ratings less than 5 V AC. TERMINALS: Copper alloy. TERMINAL SEAL: Epoxy. Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J- through J-5. For additional options not shown in catalog, consult Customer Service Center. L C Series LC SP, Mom. Operating Force GG 5 oz./ grams GD. oz./9 grams GH 6 oz./70 grams Electrical Rating X UL (see chart) V6 UL (see chart) V7 UL (see chart) F5 UL 05 (see chart) L9 UL 05 (see chart) M UL 05 (see chart) Actuator P00 Pin plunger A0.8" lever roller, high force A5.5" lever roller, high force A0.9" lever roller, low force A5.6" lever roller, low force T0.9" lever, high force T." simulated roller, high force T5.57" lever, high force T0.8" lever, low force T." simulated roller, low force T5.67" lever, low force Terminations E Solder H.0" quick connect J Wire lead L Left formed PC thru-hole R Right formed PC thru-hole S PC Thru-hole Circuitry C SPDT W SPST N.C. Y SPST N.O. Electrical Life NONE 6,000 operations U* Extended 00,000 operations * Extended operations only available on Electrical Rating options F5, L9 and M J Seal NONE (STD.) No seal E Epoxy seal Dimensions are shown: Inch (mm)

69 LC Series Subminiature Precision Snap-acting Switches LC SUMINIATURE PRECISION SNAP-ACTING SWITCHES SP MOMENTARY SERIES 0.97 (7,5) OPERATING FORCE OPTION CODE GG GD GH ASIC SWITCH OPERATING FORCES (OZ./GRAMS) NOTE: Operating force varies with actuator option, see ACTUATOR option section.. 9 J Snap-acting ELECTRICAL RATING UL CONTACT MATERIAL OPTION CODE ELECTRICAL RATING MOVALE CONTACT STATIONARY CONTACT RoHS COMPLIANT* RoHS COMPATILE* X A GP, 50 Vac, 50/60 Hz, 5E, T85 RA, 0 Vdc, E, T85 Fine silver with K gold plate Fine silver with K gold plate on copper base alloy Yes Yes V6 5()A RM, 50 Vac, 50/60 Hz, E, T85 5A GP, 50 Vac, 50/60 Hz, E, T85 5RA, 0 Vdc, E, T85 / HP, 5/50 Vac, 50/60 Hz, E, T85 Fine silver Fine silver welded on copper base alloy Yes Yes V7 0()A RM, 50 Vac, 50/60 Hz, E, T85 0A GP, 50 Vac, 50/60 Hz, E, T85 0RA, 0 Vdc, E, T85 / HP, 5/50 Vac, 50/60 Hz, E, T85 Fine silver Fine silver welded on copper base alloy Yes Yes UL 05 CONTACT MATERIAL OPTION CODE ELECTRICAL RATING MOVALE CONTACT STATIONARY CONTACT RoHS COMPLIANT* RoHS COMPATILE* F5 A, 5 V AC, 0 VDC 00,000 cycles ( U option) Fine silver with K gold plate Fine silver with K gold plate on copper base alloy Yes Yes L9 5A, / 5 and 50 V AC 00,000 cycles ( U option) Fine silver Fine silver welded on copper base alloy Yes Yes M 0.A, / 5 and 50 V AC 00,000 cycles ( U option) Fine silver Fine silver welded on copper base alloy Yes Yes * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. Consult Customer Service Center for availability and delivery of nonstandard ratings. *Low Level = conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. J Dimensions are shown: Inches (mm)

70 LC Series Subminiature Precision Snap-acting Switches ACTUATOR A HIGH FORCE A A OPTION CODE P00 FIG. DIM. A 0.97 (7,6) DIM..0 ±.05 (8,8 ± 0,8) DIM. C A (7,).570 ±.070 (,8 ±,78).9 dia. (,8Ø) A5 T0 T (5,5) 0.9 (7,) 0.0 (5,).570 ±.75 (, ±,5).0 ±.070 (8,6 ±,78).55 ±.065 (,56 ±,65).9 dia. (,8Ø) FIG. Pin Plunger A C FIG. Lever LOW FORCE A FIG. 5 Simulated Roller A T0 T (9,9) 0. (8,).0 ±.0 (8,6 ±,56).55 ±.5 (,56 ±,8) T (7,0).0 ±.09 (8,6 ±,70) A5 7 A0 0.5 (,0) 0.8 (9,7).560 ±.090 (, ±,9).560 ±.5 (, ±,9).9 dia. (,8Ø).9 dia. (,8Ø) FIG. Lever Roller FIG. Lever FIG. 6 Simulated Roller J T (,5).0 ±.00 (8,6 ±,5) ASIC FORCE A C Snap-acting FIG. 7 Lever Roller SWITCH CHARACTERISTICS OPTION CODE MAXIMUM OPERATING FORCE (OZ./GRAMS) GG GD GH MINIMUM RELEASE FORCE (OZ./GRAMS) GG GD GH MAXIMUM DIFFERENTIAL TRAVEL ALL FORCES MAXIMUM PRETRAVEL ALL FORCES MINIMUM OVERTRAVEL ALL FORCES A (0,86).0 (,56).09 (0,7) A (,).80 (,57).07 (0,9) A (,70).7 (6,9).05 (,5) A (,8).5 (8,9).068 (,7) P (0,0).00 (0,76).00 (0,5) T (0,90).0 (,56).09 (0,7) T (0,8).0 (,0).06 (0,66) T (,70).76 (7,0).05 (,5) T (,57).5 (6,0).09 (,) T (,9).7 (9,5).07 (,8) T (,9).90 (,8).00 (,0) NOTE: For basic switch operating forces, see page J-. J Dimensions are shown: Inch (mm)

71 LC Series Subminiature Precision Snap-acting Switches TERMINATIONS E SOLDER H.0" QUICK CONNECT NOTE: Use Amp Quick Connect Part No J WIRE LEAD RATING WIRE SIZE L LEFT FORMED PC THRU-HOLE AMP AWG PC MOUNTING 5 AMPS 0 AWG 0. AMPS 8 AWG TERMINAL COMMON NORMALLY OPEN WIRE COLOR LACK WHITE J R RIGHT FORMED PC TRU-HOLE NORMALLY CLOSED RED PC MOUNTING S PC THRU-HOLE PC MOUNTING Snap-acting 0.88 (7,) CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) ELECTRICAL LIFE NONE 6,000 OPERATIONS U EXTENDED 00,000 OPERATIONS SEAL NONE NO SEAL E EPOXY SEAL J 5 EPOXY.075 MAX. (,9)

72 LCA Series Subminiature Snap-acting Switches Features/enefits Compact design Long life and high electrical capacity Quick connect, solder terminals, PC terminals Wide variety of actuator styles RoHS compatible Typical Applications Motorized equipment Sump pump Thermostatic controls UL6058- J Snap-acting Specifications CONTACT RATING: From low level to 0. 5/50 V AC ELECTRICAL LIFE: see chart below MECHANICAL LIFE: 00,000 cycles. INSULATION RESISTANCE: 00 M ohm min. DIELECTRIC STRENGTH:,500 Vrms sea level. OPERATING TEMPERATURE: 0ºC to +5ºC OPERATING FORCE: 50 grams at actuator button MAX. Forces are less at free end of lever actuators; (see ACTUATOR S option sections). MOUNTING: -56 screws, torque. in/lbs max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Materials SWITCH HOUSING: Thermoplastic polyester ACTUATOR UTTON: Thermoplastic polyester. SPRING: Copper alloy. PIVOT: Copper alloy. MOVALE CONTACTS: Silver alloy STATIONARY CONTACTS: Silver alloy TERMINALS: Copper alloy. ACTUATOR LEVER: Stainless steel. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-6 thru J-9. For additional options not shown in catalog, consult Customer Service Center. L C A 5 0 Electrical Rating Series LCA SP, Mom. Operating Force grams Option Code S5 UL A 5/50 V AC E 6 A 5/50 V AC E 0. A 5/50 V AC E NA UL A 5/50 V AC E 6 A 5/50 V AC E 0. A 5/50 V AC E 5 A 5/50 V AC E5 0. A 5/50 V AC E 6 ()A 5/50 V AC E 0. A 5/50 V AC E NA Actuator P00 Pin plunger T05.8 mm short lever T mm lever T mm lever T.9 mm lever T6 5. mm lever T8 8. mm lever T 0. mm lever T. mm lever T.5 mm lever S mm simulated lever S09 9. mm simulated lever A mm lever roller Terminations S Solder Q.0 Quick Connect P PC Thru Hole L Left Form PC R Right Form PC Circuitry C SPDT W SPST N.C. Y SPST N.O. J 6

73 LCA Series Subminiature Snap-acting Switches SERIES LCA ø.5 ø..0 R J ELECTRICAL RATING RoHS COMPLIANT * YES YES RoHS COMPATILE * OPTION CODE ELECTRICAL RATING YES 0 YES 06 0.A, 5/50 VAC 6A, 5/50 VAC Snap-acting YES YES 0 0.A, 5/50 VAC YES YES S5 5A, 5/50 VAC * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. OPERATING FORCE OPTION CODE 50 OPERATING FORCES (grams) 50 grams max. J 7

74 LCA Series Subminiature Snap-acting Switches ACTUATOR A05 LEVER ROLLER SXX SIMULATED ROLLER A C.9. A C.05 D E D E TXX LEVER P00 J A.05 Snap-acting C D E 7.5. C. D E ACTUATOR OPTION CODE A r ef.c D E Diff. Motion mm mm mm mm mm mm max LENGTH OF LEVER Lever length for front mtg. hole to OP PRE TRAVEL (MAX) OPERATING POSITION FREE POSITION (MAX) Oper. Force max. P00 NA NA ± T ± T ± T ± T ± T ± T ± T ± T ± T ± S ± S ± A ± grams Release Force min. grams Over Travel min. J 8

75 TERMINATIONS LCA Series Subminiature Snap-acting Switches S SOLDER Q QUICK CONNECT ø ø P PC THRU HOLE L LEFT FORM PC J R 7.05 RIGHT FORM PC Snap-acting 8,8 7, 5,5 X,50, COM NO NC PLUNGER POSITION PC MOUNTING CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) J 9

76 LCS Series Subminiature Sealed Snap-acting Switches UL6058- Features/enefits Compact design Long life and high electrical capacity Quick connect, solder terminals, PC terminals, wire leads Wide variety of actuator styles RoHS compatible, RoHS compliant IP67 Typical Applications Motorized equipment Sump pump Thermostatic controls Computers Air conditioners J Snap-acting Specifications CONTACT RATING: from low level to 5 Amp ELECTRICAL LIFE: 0,000 cycles INSULATION RESISTANCE: 00 M ohm min. DIELECTRIC STRENGTH:,000 VAC OPERATING TEMPERATURE: -0ºC to +0ºC (without wire) -0ºC to +85ºC (with UL007 wire) -0ºC to +05ºC (with UL05 wire) -0ºC to +05ºC (with UL0 wire) -0ºC to +80ºC (with UL06 wire) -0ºC to +0ºC (with UL0 wire) OPERATING FORCE: (see ACTUATOR S option sections). MOUNTING: -56 screws, torque. in/lbs max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Materials SWITCH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 9V-0). ACTUATOR UTTON: Thermoplastic polyester. SPRING: Copper alloy. PIVOT: Copper alloy. MOVALE CONTACTS: Option 0 Gold plating over silver alloy Option 05 Silver alloy STATIONARY CONTACTS: Option 0 Gold plating over silver alloy Option 05 Silver alloy TERMINALS: Copper alloy. ACTUATOR LEVEL: Stainless steel. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-0 thru J-. For additional options not shown in catalog, consult Customer Service Center. Series LCS Electrical Rating L C S Option Code 0 05 UL A 5/50 V AC NA 5 A 5/50 V AC 6 A 50 V AC Operating Force 0 grams Actuator P00 Pin plunger T00.9 mm short lever T05 7. mm short lever T07 9. mm short lever T 5.5 mm lever T9. mm lever T8 0.7 mm lever T 55.9 mm lever S6 8.6 mm simulated lever A05 7. mm lever roller Terminations S Solder Q 0.0 Quick Connect P PC Thru Hole W Wire leads potted Z Wire leads non-potted Wire Type AWG 0 0 AWG AWG AWG 6 6 AWG Wire UL # (when required) A UL007 UL05 C UL0 D UL06 Circuitry C SPDT W SPST N.C. Y SPST N.O. Wire Side (when required) A Wire out the bottom Wire out the right side C Wire out the left side D None J 0

77 LCS Series Subminiature Sealed Snap-acting Switches SERIES LCS "C" CIRCUITRY FP TYP.±0.. TYP "W" CIRCUITRY TYP 9.5± X. ELECTRICAL RATING.8 TYP TYP "Y" CIRCUITRY J Snap-acting RoHS COMPLIANT * RoHS COMPATILE * OPTION CODE ELECTRICAL RATING YES YES 05 5 AMP, 5/50 V AC YES YES 0 0. AMP, 5/50 V AC OPERATING FORCE OPTION CODE OPERATING FORCES (grams) 0 g. max. J

78 LCS Series Subminiature Sealed Snap-acting Switches ACTUATOR P00 T REF T REF A05. REF T00 T8 T.. REF S6 8.5 REF 0. REF REF 8.6 J T05 T.55 REF Snap-acting 5. REF C C C C E D E D E D E D ACTUATOR OPTION CODE A C D E LENGTH OF LEVER OVER TRAVEL (MIN) PRE TRAVEL (MAX) OPERATING POSITION FREE POSITION (MAX) DIFFERENTIAL MOTION (MAX) OPERATING FORCE (MAX) RELEASE FORCE (MIN) P00 N/A T T T T T T T S A J

79 LCS Series Subminiature Sealed Snap-acting Switches TERMINATIONS S SOLDER Q QUICK CONNECT.8mm / "C" CIRCUITRY TYP P 7.5±0. TYP 5 PC THRU HOLE 9.5± FP.5.±0..6 ± 0. X..8 TYP TYP. TYP "W" CIRCUITRY "Y" CIRCUITRY Z or W TYP A WIRE ORIENTATION 9. TYP. TYP ± 0. TYP X.5/.5 6. TYP 0.6 TYP 0.5 ± 0.05 TYP POTTING "W' OPTION SHOWN ± 0.8 ± 6. Z or W (6.) Z or W 5±0. RECOMENDED MOUNTING PATTERN WIRE ORIENTATION Y OR W CIRCUITRY LACK COM LUE NO ± 0. WIRE ORIENTATION C CIRCUITRY 7.5 ±0.TYP. (8.5) POTTING "W' OPTION SHOWN Z or W (8.5) POTTING "W' OPTION SHOWN Z or W C: GRAY NO: LUE C WIRE ORIENTATION Y OR W CIRCUITRY. C WIRE ORIENTATION C CIRCUITRY NC: LACK LACK COM LUE NO ± ±0. (6.) J Snap-acting LACK COM GRAY NC LUE NO (.) (.) LACK COM LUE NO GRAY NC ± (6.) POTTING. "W' OPTION ± 0. SHOWN POTTING "W' OPTION SHOWN. ±. ± (6.) CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) J

80 MM Series Subminiature Precision Snap-acting Switches Features/enefits Low level and power switching Long electrical and mechanical life Increased overtravel Reliable snap-acting mechanism Typical Applications Limited space constraints Communication devices Specifications CONTACT RATING: From low level* to 7 50 V AC. ELECTRICAL LIFE: 00,000 cycles at full rated load. INSULATION RESISTANCE:,000 ohm min. DIELECTRIC STRENGTH:,000 V RMS sea level. OPERATING TEMPERATURE: 67 F to 75 F ( 55 C to 5 C). OPERATING FORCE: 5 oz. ( grams) max. at actuator button. MOUNTING: -56 screws, torque in/lbs max. *Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Materials SWITCH HOUSING: Heat resistant phenolic (UL 9V-0). ACTUATOR UTTON: Heat resistant phenolic (UL 9V-0). SPRING: eryllium copper CDA alloy C700. PIVOT: rass CDA alloy 60. MOVALE CONTACTS: Fine silver for ratings greater than 5 V AC. K gold for 5 V AC or less. STATIONARY CONTACTS: Fine silver inlay on copper CDA alloy C000 for ratings greater than 5 V AC. K gold on copper CDA alloy C000 for 5 V AC or less. TERMINALS: Copper CDA alloy C8700. J Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J- through J-9. For additional options not shown in catalog, consult Customer Service Center. Series MM SP, Mom. Operating Force GG 5 oz./ grams Electrical Rating D 7A 5, 50 V AC 7A 8 VDC resistance A 8 VDC inductive.5a 8 VDC (lamp) F5 A, 5 V AC, 0 V DC M M G G Actuator P0 D0 L0 L W0 W Pin plunger Plunger, high overtravel Leaf Leaf, high force, low motion Leaf roller Leaf roller, high force, low motion Terminations C L R T Single turret solder Left formed PC thru-hole Right formed PC thru-hole PC thru-hole,.05 J Dimensions are shown: Inch (mm)

81 MM Series Subminiature Precision Snap-acting Switches SWITCH WITH STANDARD OPTIONS MMGGDP0C PART NUMER MMGGDP0C ASIC OPERATING FORCE (OZ./GRAMS) 5 ELECTRICAL RATING 7 50 V AC. SERIES OPERATING FORCE MM SPDT MOMENTARY OPTION CODE GG ASIC SWITCH OPERATING FORCE 5 oz. ( grams) maximum for basic switch with pin plunger actuator ( P0 actuator option). J ELECTRICAL RATING NOTE: Operating force varies with actuator option, see ACTUATOR option section. CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATILE* MOVALE CONTACT STATIONARY CONTACT ELECTRICAL RATING Snap-acting D Yes Yes Fine silver. Fine silver inlay on copper alloy. 7A 5, 50 V AC; 7A 8 VDC resistance A 8 VDC inductive;.5a 8 VDC (lamp) F5 Yes Yes K Gold. K Gold on copper alloy. From low level* to 5 V AC, 0 V DC. Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. All models with all options. Consult Customer Service Center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. ACTUATOR OPTION CODE FIG. DIM. A DIM. DIM. C P0 D0 FIG. Pin Plunger FIG. Leaf FIG. Plunger L0 L W0 W FIG. Leaf Roller FIG. 5 Leaf FIG. 6 Leaf Roller J 5 Dimensions are shown: Inches (mm)

82 MM Series Subminiature Precision Snap-acting Switches ACTUATOR SWITCH CHARACTERISTICS OPTION CODE MAXIMUM OPERATING FORCE (OZ./GRAMS) MINIMUM RELEASE FORCE (OZ./GRAMS) MAXIMUM DIFFERENTIAL TRAVEL MAXIMUM PRETRAVEL MINIMUM OVERTRAVEL NOTE: For basic switch operating forces, see page J-. TERMINATIONS J C SINGLE TURRET SOLDER L LEFT FORMED PC THRU-HOLE Snap-acting PC MOUNTING T PC THRU-HOLE,.05 R RIGHT FORMED PC THRU-HOLE PC MOUNTING PC MOUNTING J 6 Dimensions are shown: Inch (mm)

83 ZM Series Subminiature Snap-acting Switches Features/enefits Reliable snap-acting mechanism Long electrical and mechanical life Compact sizeideal when space is limited Various PC terminals and actuators RoHS compliant / compatible Typical Applications PC detection switch Communication devices Testing equipment Security/Alarm systems Consumer electronics UL6058- Specifications CONTACT RATING: F7: 5 VAC M9: 60 VDC. ELECTRICAL LIFE: 0,000 A INSULATION RESISTANCE: 00 M ohm min. DIELECTRIC STRENGTH: 000 Vrms. OPERATING TEMPERATURE: 0ºC to 85ºC. OPERATING FORCE: CJ: 50 grams, CH: 90 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. Materials COVER: Nylon 6/6 ACTUATOR UTTON: Nylon 6/6 CASE: Nylon 6/6 SPRING: SUS MOVALE LADE: ecu MOVALE CONTACT: Silver alloy (M9 option gold plated) FIXED CONTACTS: Silver alloy (M9 option gold plated) FIXED TERMINALS: rass - Ag plated. ACTUATOR (Leaf / Roller options): SUS NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-8 and J-9. For additional options not shown in catalog, consult Customer Service Center. J Snap-acting Series ZM SP, Mom. Operating Force CJ 50 grams CH 90 grams Electrical Rating see chart below Actuator P0 Pin plunger L0 Leaf L Leaf T Simulated roller T Simulated roller Terminations T PC Thru-hole L Left-footed, PC Thru-hole R Right-footed, PC Thru-hole K PC Thru-hole with retention feature Option Code F7 M9 UL 05 A 5 V AC 0. A 8 V DC 0. A 60 V DC 0. A 5 V AC UL A 5 V AC A 0 V DC 0. A 8 V DC 0. A 60 V DC 0. A 5 V AC A 5 V AC 0. A 8 V DC 0. A 60 V DC 0. A 5 V AC J 7 Dimensions are shown: Inches (mm)

84 ZM Series Subminiature Snap-acting Switches SERIES Z M ZM SUMINIATURE SNAP-ACTING SWITCHES SP MOMENTARY 0.0 (,).60 (6,6).08 (,05) FREE POS. OPER. POS..0 (0,6) C NO ø.079 (ø,05) NC ZMCJF7L0T SPDT PC MOUNTING J Snap-acting OPERATING FORCE OPTION CODE CJ MOUNTING SCREWS SIZE -6 ASIC SWITCH OPERATING FORCE (OZ./GRAMS) CH.5 90 ELECTRICAL RATING CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATILE* MOVALE CONTACT STATIONARY CONTACT ELECTRICAL RATING F7 Yes Yes Silver alloy see chart M9 Yes Yes Gold plating or silver alloy see chart * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. All models with all options. Consult Customer Service center for availability and delivery of nonstandard ratings. Option Code F7 M9 UL 05 A 5 V AC 0. A 8 V DC 0. A 60 V DC 0. A 5 V AC UL A 5 V AC A 0 V DC 0. A 8 V DC 0. A 60 V DC 0. A 5 V AC A 5 V AC 0. A 8 V DC 0. A 60 V DC 0. A 5 V AC J 8 Dimensions are shown: Inch (mm)

85 ZM Series Subminiature Snap-acting Switches ACTUATOR P0 PIN PLUNGER L0 L LEAF, 50 GRAMS (CJ ONLY) LEAF, 0 GRAMS (CH ONLY) T T SIMULATED ROLLER, 0 GRAMS (CJ ONLY) SIMULATED ROLLER, 5 GRAMS (CH ONLY) FP OP OP FP OP FP ACTUATOR OPTION CODE A (mm) LENGTH OF LEVER Ref (mm) LEVER LENGTH MTG. HOLE TO OP C (mm) PRE- TRAVEL MAX D (mm) OPERATING POSITION E (mm) FREE POSITION MAX DIFF. MOTION mm MAX CJ OPER. FORCE grams MAX CH RELEASED FORCE Grams MAX OVER TRAVEL MIN P0 PIN PLUNGER NA NA L0 LEAF J L LEAF T SIMULATED ROLLER T SIMULATED ROLLER T (STD.) PC THRU-HOLE TERMINATIONS K PC THRU-HOLE WITH RETENTION FEATURE Snap-acting.8 (,5).0 (0,) TYP..05 (0,9).0 (.0).0 (0.) L LEFT FOOTED, PC THRU-HOLE R RIGHT FOOTED, PC THRU-HOLE.07 (,8).07 (,8).05 TYP. (0,9). (,).05 TYP. (0,9). (,) J 9 Dimensions are shown: Inches (mm)

86 ZMA Series Subminiature Snap-acting Switches Features/enefits Reliable snap-acting mechanism Long electrical and mechanical life Compact sizeideal when space is limited Various PC terminals and actuators RoHS compatible & compliant Typical Applications PC detection switch Communication devices Testing equipment Security/Alarm systems Consumer electronics UL6058- J Specifications CONTACT RATING: 5 V AC V DC / 50 V AC V DC 5 V AC 60 V DC ELECTRICAL LIFE: 00,000 0.A / 0,000 A. MECHANICAL LIFE:,000,000 cycles. INSULATION RESISTANCE: 00 M ohm min. DIELECTRIC STRENGTH: 500 Vrms. OPERATING TEMPERATURE: 0ºC to 85ºC OPERATING FORCE: 80 or 50 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. Materials CASE/COVER: PT ACTUATOR: utton nylon 6/6 MOVALE CONTACTS: Silver alloy or gold plated STATIONARY CONTACTS: Silver alloy or gold plated TERMINALS: rass, silver plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-5 and J-5. For additional options not shown in catalog, consult Customer Service Center. Z M A C Series ZMA SP, Mom. Electrical Rating See charts below Silver Contacts Option UL UL Code A 0.A 60 V DC 0.A 60 V DC 0.A 5 V AC 0.A 5 V AC 0.A 5 V AC 0A A 5 V AC A 5 V AC A V DC A 5 V AC 0A A V DC A 5 / 50 V AC Operating Force oz. / 50 grams oz. / 80 grams Actuator P00 Pin plunger S0 Simulated roller 5.8mm L0 Lever 0.5mm L Lever 7.mm L08 Lever.95mm A0 Roller.mm L0 Lever.9mm S06 Simulated roller.0mm S07 Simulated roller 0.75mm A V DC A 5 / 50 V AC Terminations P PC Thru-hole L Left-footed, PC Thru-hole R Right-footed, PC Thru-hole E Solder K PC Thru-hole with rentention feature C SPDT Gold Plated Contacts Option UL Code 05 0.A 60 V DC G00 0.A 5 V AC G0 G0 A 5 V AC UL A 60 V DC 0.A 5 V AC A 5 V AC A V DC A V DC A 5 / 50 V AC 0.A 5 V AC A 5 V AC A V DC A 5 / 50 V AC J 50 Dimensions are shown: Inch (mm)

87 ZMA Series Subminiature Snap-acting Switches SERIES Z M ZMA SUMINIATURE SNAP-ACTING SWITCHES SP MOMENTARY 0.0 (,).60 (6,6).08 (,05) FREE POS. OPER. POS..0 (0,6) C NC ZMA0A50L0PC SPDT NO ø.079 (ø,05) PC MOUNTING MOUNTING SCREWS SIZE -6 J Silver Contacts Option UL UL Code A 0.A 60 V DC 0.A 60 V DC 0.A 5 V AC 0.A 5 V AC 0.A 5 V AC 0A A 5 V AC A 5 V AC A V DC A 5 V AC 0A A V DC A 5 / 50 V AC ELECTRICAL RATING A V DC A 5 / 50 V AC Gold Plated Contacts Option Code G00 G0 G0 UL 05 0.A 60 V DC 0.A 5 V AC A 5 V AC UL A 60 V DC 0.A 5 V AC A 5 V AC A V DC A V DC A 5 / 50 V AC 0.A 5 V AC A 5 V AC Snap-acting A V DC A 5 / 50 V AC * Note: See Technical Data in section N of this catalog for RoHS compliant and compatible definition and specifications. All models with all options. Consult Customer Service center for availability and delivery of nonstandard ratings. OPERATING FORCE OPTION CODE 50 ASIC SWITCH OPERATING FORCE (OZ./GRAMS) Third Angle Projection Dimensions are shown: Inches (mm) J 5

88 ZMA Series Subminiature Snap-acting Switches ACTUATOR P00 PIN PLUNGER L08 LEVER.95MM E '' 'A' '' 'A' S0 SIMULATED ROLLER 5.8MM E A0 ROLLER.MM E '' 'A' '' 'A' J Snap-acting L0 LEVER 0.5MM E 'A' '' L0 LEVER.9MM E '' 'A' L LEVER 7.MM E S06 SIMULATED ROLLER.0MM E '' 'A' '' 'A' S07 SIMULATED ROLLER 0.75MM E '' 'A' J 5 Dimensions are shown: Inch (mm)

89 ZMA Series Subminiature Snap-acting Switches SWITCH CHARACTERISTICS CODE OPER. FORCE MAX. (GRAMS) REL. FORCE MIN. (GRAMS) 'A' FP MAX. (MM) '' OP MAX. (MM) 'C' PT MAX. (MM) 'D' OT MIN. (MM) P ± 'E' MIN. (MM) S ± L0 (80gf) ± L0 (50 gf) ± L ± L ± A ± L ± S ± S ± E 'D' 'C' '' 'A' TERMINATIONS P PC THRU-HOLE L LEFT FOOTED, PC THRU-HOLE J.8 (,5).0 (0,) TYP..05 (0,9).05 TYP. (0,9).07 (,8). (,) Snap-acting R RIGHT FOOTED, PC THRU-HOLE E SOLDER.07 (,8) COM N.O. N.C..07 (,85).8 (,5).05 TYP. (0,9). (,).05 (,).00 (5,08).086 (,).00 (,).00 (5,08).05 (0,6) K PC THRU-HOLE WITH RETENTION FEATURE.0 (.0).0 (0.) Third Angle Projection Dimensions are shown: Inches (mm) J 5

90 ZM Series Subminiature Snap-acting Switches Features/enefits Compact design Various operating forces Different lever options PC or solder terminal options Detect interlock and movement Typical Applications Consumer electronics Communications Industrial meters Security systems Office equipment J Specifications CONTACT ARRANGEMENT: SPDT CONTACT RATING: 0. 0 V DC INITIAL CONTACT RESISTANCE: 50 mω max. INSULATION RESISTANCE: 00 M Ω 500 VDC DIELECTRIC STRENGTH: 000 VAC (50-60 Hz) MECHANICAL LIFE: 500,000 cycles ELECTRICAL LIFE: 50,000 cycles PRE-TRAVEL: 0.5 mm max. OVER-TRAVEL: 0.5 mm min. OPERATING TEMPERATURE: -0ºC to + 70ºC Materials COVER / HOUSING: PT (black) KNO: PT (red) CONTACT: Copper alloy, silver plated TERMINALS: Copper alloy, silver plated LEVER: Stainless steel NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-55 and J-56. For additional options not shown in catalog, consult Customer Service Center. Z M 0 0 A C Series ZM SP, Mom. Electrical Rating 00A 0. 0 V DC Operating Force ± 0 grams 5 5 ± 5 grams Actuator P00 Pin plunger L0 Straight lever.5 mm L0 Straight lever. mm S0 Simulated roller 7.5 mm Terminations P PC Thru-hole S Solder Circuitry C SPDT J 5 Dimensions are shown: Inch (mm)

91 ZM00A70P00PC PIN PLUNGER, PC THRU-HOLE.8 ZM Series Subminiature Snap-acting Switches OPERATING FORCE: 70 ± 0 gf OPERATING POSITION (OP): 5.5 ± 0.0 mm FREE POSITION (FP): N/A 5.8 Ø X. 5 P - T 6.5 O.P. P.T Ø.0 TYP. COMMON N.O N.C.5 TERMINAL TERMINAL TERMINAL COM N.O N.C SCHEMATIC PIERCING PLAN ZM00A5L0PC STRAIGHT LEVER.5 MM, PC THRU-HOLE.8 OPERATING FORCE: 5 ± 5 gf OPERATING POSITION (OP): 7. ± 0.8 mm FREE POSITION (FP): 0 mm max. J Ø X Ø -0.9 O.P. F.P P - T Ø.0 TYP COMMON N.O N.C COM N.O N.C TERMINAL TERMINAL TERMINAL SCHEMATIC PIERCING PLAN Snap-acting ZM00A5L0PC STRAIGHT LEVER. MM, PC THRU-HOLE.8 OPERATING FORCE: 5 ± 5 gf OPERATING POSITION (OP): 6.0 ± 0.8 mm FREE POSITION (FP): 8.5 mm max Ø X..0 P - T Ø.0 TYP O.P. F.P. COM N.O N.C COMMON TERMINAL N.O TERMINAL N.C TERMINAL SCHEMATIC PIERCING PLAN Dimensions are shown: Inches (mm) J 55

92 .8 ZM Series Subminiature Snap-acting Switches ZM00A70P00SC PIN PLUNGER, SOLDER.8 OPERATING FORCE: 70 ± 0 gf OPERATING POSITION (OP): 7.0 ± 0.0 mm FREE POSITION (FP): N/A Ø X. 5 O.P. P.T..8 P - T Ø 0.6 COMMON N.O N.C COM N.O N.C TERMINAL TERMINAL TERMINAL SCHEMATIC PIERCING PLAN.8.8 ZM00A5L0SC STRAIGHT LEVER. MM, SOLDER.8 OPERATING FORCE: 5 ± 5 gf OPERATING POSITION (OP): 7.5 ± 0.8 mm J FREE POSITION (FP): 0 mm max. Snap-acting 6.5 Ø X. 5.0 P.T. O.P P - T ZM00A5S0SC SIMULATED ROLLER 7.5 MM, SOLDER.8 OPERATING FORCE: 5 ± 5 gf OPERATING POSITION (OP): 8.5 ± 0.8 mm FREE POSITION (FP): 9.5 mm max R..7 ØX. P - T Ø 0.6 COM N.O N.C COMMON TERMINAL N.O TERMINAL PIERCING PLAN N.C TERMINAL 7 O.P. (0) F.P Ø 0.6 COM N.O N.C SCHEMATIC COMMON TERMINAL N.O TERMINAL PIERCING PLAN N.C TERMINAL.8.8 Dimensions are shown: Inch (mm) J 56

93 ZMS Series Subminiature Snap-acting Switches (IP65) Features/enefits Reliable snap-acting mechanism Long electrical and mechanical life Compact sizeideal when space is limited Various PC terminals and actuators RoHS compatible IP67 with potted wires only Typical Applications PC detection switch Communication devices Testing equipment Security/Alarm systems Consumer electronics Specifications CONTACT RATING: 5 V AC/ A@ V DC, V DC ELECTRICAL LIFE: 00, A V DC 00,000 A V DC 6,000 A 5 V AC MECHANICAL LIFE: 500,000 cycles INSULATION RESISTANCE: 00 M ohm min. DIELECTRIC STRENGTH: 500 Vrms. OPERATING TEMPERATURE: -0 C + 85 C. OPERATING FORCE: 0 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. UL6058- UL05 Materials CASE: Nylon COVER/ACTUATOR: PT MOVALE CONTACTS: Amp silver alloy, 0.0A gold plating over silver alloy STATIONARY CONTACTS: Amp silver alloy, 0.0 A gold plating over silver alloy TERMINALS: rass, silver plated LEVER: Stainless steel NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. J uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-58 through J-60. For additional options not shown in catalog, consult Customer Service Center. Z M S Snap-acting Series ZMS SP, Mom. Over Travel H High Travel L Low Travel Electrical Rating V DC 0 A 5 V AC A V DC Operating Force 0 0 grams /.59 Actuator P00 Pin plunger T0.5 lever T.8 simulated roller * Standard Wire: 0 AWG UL 007 Terminations P PC Thru-hole L Left form, PC Thru-hole R Right form, PC Thru-hole S Solder type J Wire leads out bottom * K Wire leads out right side * W Wire leads out left side * Mounting Styles S Std (No support post) L Support post left R Support post right Circuitry C SPDT W SPST N.C. Y SPST N.O. J 57 Dimensions are shown: Inches (mm)

94 ZMS Series Subminiature Snap-acting Switches (IP65) SERIES Z M S ZMSH HIGH OVER TRAVEL Switch option shown: ZMSH00P00SSC,7 (.579 ), (.80 ) PT ø (.079 ),7 (.067 ) 7,5 8, (.95 ) (.9 ) OP FP ZMSL LOW OVER TRAVEL Switch option shown: ZMSL00P00PSC, (.6 ) NC NO COM,5 (.0 ),7 (.579 ), (.80 ) 0,5 (.00 ),8 (.0 ), (.6 ) 5, PT Ø (.079 ) (. ) 9,05 7,5 (.56 ) (.95 ) OP FP J Snap-acting 5,08 (.00 ) NC NO COM ELECTRICAL RATING 0,6 ±0, (.0 ±.00 ) 5,08 (.00 ),5 (.098 ) CONTACT MATERIAL UL6058- OPTION CODE MOVALE CONTACT / STATIONARY CONTACT UL05 ELECTRICAL RATING ENEC 0,5 ±0,05 (.00 ±.00 ),8 (.0 ) 5, (. ) ELECTRICAL RATING 00 Gold plating over silver alloy 0.0 V DC 0. V DC 0m V DC 5E5 0 Silver alloy 5 V AC V DC V DC E5 Consult Customer Service center for availability and delivery of nonstandard ratings. OPERATING FORCE OPTION CODE ASIC SWITCH OPERATING FORCE (OZ./GRAMS) J 58 Third Angle Projection Dimensions are shown: Inch (mm)

95 ZMS Series Subminiature Snap-acting Switches (IP65) ACTUATOR P00 PIN PLUNGER (IP65) T0.5 LEVER (IP65) T LEVER (IP65),7 (.579 ), (.80 ) PT,7 (.579 ), (.80 ) PT PT 8,6 (.7 ),7 (.5787 ), (.80 ) OP FP OP FP FP OP 9,05 (.56) approved SWITCH CHARACTERISTICS Actuator code Maximum Operate Force (grams/oz.) Minimum Release Force (grams/oz.) P T0 T Free Position Max.7 ().60 (5.5).76 (8.5) Maximum Pre-travel 0.0 (0,8) 0.5 (.85) 0.86 (.8) Operate Position.5 ±.0 (0.55 ±.).0 ±.00 (. ±.5).59 ±.0 (.7 ±.8) Maximum Differential P00 PIN PLUNGER (IP67) T0.5 LEVER (IP67) T.8 LEVER (IP67),7 (.579 ), (.80 ) PT,7 (.579 ), (.80 ) PT PT.0 (0.) 0.00 (0,5) 0.00 (0,7) Low Overtravel min. (L) 0.0 (0,8) 0.05 (,5) 0.06 (,65) 8,6 (.7 ),7 (.5787 ), (.80 ) High Overtravel min. (H) (,7) 0.08 (,) 0.0 (,57) J Snap-acting OP FP OP FP FP OP Gray NC lue (NO) lack (COM) SWITCH CHARACTERISTICS J TERMINATION ONLY Actuator code Maximum Operate Force (grams/oz.) Minimum Release Force (grams/oz.) P Free Position Max.650 (6.50) Maximum Pre-travel 0.0 (0,8) Operate Position.59 ±.00 (5.05 ± 0.5) Maximum Differential.0 (0.) Low Overtravel min. (L) 0.0 (0.8) High Overtravel min. (H) (,7) T (9.85) 0.5 (.85).68 ±.08 (5.7 ±.7) 0.00 (0.5) 0.05 (.5) 0.08 (,) T (.95) 0.88 (.8).77 ±.09 (8. ±.0) 0.00 (0.7) 0.06 (.65) 0.0 (,57) J 59 (inch)

96 ZMS Series Subminiature Snap-acting Switches (IP65) TERMINATIONS P PC THRU-HOLE L LEFT FOOTED, PC THRU-HOLE 5.85 (0.0) PC MOUNT ().5 holes (.098) 9.5 (.75) 0. (.00) J Snap-acting R S 5,08 (.00) RIGHT FOOTED, PC THRU-HOLE 0,5 (.00),8 (.0) 5, (. ) 5,08 (.00) 5,08 (.00) SOLDER TYPE 0,6± 0, (.0±.00) 5,08 (.00) PC MOUNTING HOLE 5 (.97),05 (.08) To center of terminal,85 (.),5 (.098),5/,50 (.05) (.059) 5.85 (0.0) PC MOUNT ().5 holes (.098) 0.6 (.00) ().5 to.50 holes (.05) to (.059) 0,5±0,05 (.00±.00),8 (.0) 9.5 (.75) 0. (.00) 5.08 (.00) To center,05 of terminal (.08 ),85 (. ) J WIRE LEADS OTTOM (IP67) W.0 (7) 0.8 (.00) lack lue Grey.7 (COM) (NO) (NC) (.5) Strip Ends LEFT SIDE (IP67) 0,5 0,6 (.097) 0.6 (.06),8 (.00 ) 5,08 5,08 (.0 ) (.000 ) (.000 ) ().5 to.50 holes (.05) to (.059) 0,8 (.00) K (.7) RIGHT SIDE (IP67) LACK (COM) GREY (NC) 0,8 (.00) LUE (NO) 5.08 (.00) GREY (NC).7 (0.5) STRIP ENDS Standard Wire: 0 AWG UL 007,7 (.067 ), (.6 ),5 (.098 ), (.6 ) 0,5 (.097 ),8 (.0 ),7 (0.5) STRIP ENDS LACK (COM) LUE (NO) (.7) MOUNTING STYLES S STD (NO SUPPORT POST) L SUPPORT POST LEFT R SUPPORT POST RIGHT X 5 (.97 ) 5 (.97 ).60 (.0) ø.60 (,0) CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST, NC (Single Pole, Single Throw, Normally Closed) SPST, NO (Single Pole, Single Throw, Normally Open) Third Angle Projection (inch) J 60

97 ZMSM Series with Mounting Hole Subminiature Snap-acting Switches (IP65) Features/enefits Reliable snap-acting mechanism Long electrical and mechanical life Various PC terminals and actuators RoHS compatible IP67 with potted wires only Typical Applications Communication devices Testing equipment Security/Alarm systems Specifications CONTACT RATING: 5 V AC/ A@ V DC, 0.0 A@ V DC. ELECTRICAL LIFE: 00, A, V DC / 00,000 A, V DC, 6,000 A, 5 VAC INSULATION RESISTANCE: 00 M ohm min. DIELECTRIC STRENGTH: 500 Vrms. OPERATING TEMPERATURE: see chart below. OPERATING FORCE: 0 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. UL6058- Materials CASE: Nylon COVER/ACTUATOR: PT MOVALE CONTACTS: Amp silver, 0.0A gold STATIONARY CONTACTS: Amp silver, 0.0A gold TERMINALS: rass, Pre-plated with silver LEVER: Stainless steel NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. J uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-6 through J-6. For additional options not shown in catalog, consult Customer Service Center. Z M S M Snap-acting Series ZMSM SP, Mom. Over Travel H High Travel L Low Travel Electrical Rating V DC A 5 V AC A V DC Operating Force 0 0 grams /.59 Actuator P00 Pin plunger T0.5 lever T.8 simulated roller Terminations P PC Thru-hole S Solder type J Wire leads 0 AWG UL 007 K Wire leads AWG UL0 W Wire leads AWG UL06 N Wire leads 6 AWG UL0 Circuitry Mounting Styles C SPDT M No support post W SPST N.C. L Two support post left Y SPST N.O. R Two support post right T One support post left and right J 6

98 ZMSM Series with Mounting Hole Subminiature Snap-acting Switches (IP65) SERIES ZMSMH HIGH OVER TRAVEL ±0.5 PT.7 6 OP FP ZMSML LOW OVER TRAVEL MODEL SHOWN: ZMSMHXXXXP00PLC ±0.5 PT OP FP J.. 5. Snap-acting MODEL SHOWN: ZMSMLXXXXP00PLC ELECTRICAL RATING CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATILE* MOVALE CONTACT STATIONARY CONTACT ELECTRICAL RATING 0 Yes Yes Gold alloy 0.0 V DC Yes Yes Silver alloy 5 V AC V DC Model with option S (solder type) only. Consult Customer Service center for availability and delivery of nonstandard ratings. OPERATING FORCE OPTION CODE ASIC SWITCH OPERATING FORCE (OZ./GRAMS) J 6

99 ZMSM Series with Mounting Hole Subminiature Snap-acting Switches (IP65) ACTUATOR P00 PIN PLUNGER (IP65) T0.5 LEVER (IP65) T LEVER (IP65).7 REF PT 8.7 REF PT.75 PT OP FP OT OP FP OT OP FP SCALE.000 MODEL SHOWN: ZMSMLXXXXP00PLC MODEL SHOWN: ZMSMLXXXXT0PLC SWITCH CHARACTERISTICS MODEL SHOWN: ZMSMLXXXXTPLC Actuator code Maximum Operate Force (grams/oz.) Minimum Release Force (grams/oz.) Free Position Max (mm) Maximum Pre-travel (mm) Operate Position (mm) Maximum Differential (mm) Low Overtravel min. (mm) High Overtravel min. (mm) P ± T0 T ± ± J TERMINATIONS P PC THRU-HOLE (IP65) S SOLDER TYPE (IP65) Snap-acting ± TYP 0.5 TYP MODEL SHOWN: ZMSMHXXXXP00PLC MODEL SHOWN: ZMSMHXXXXP00SMC ø, ±.7 (.08 ±.005) 5,08 (.00) 5,08 (.00) PC MOUNTING HOLE J WIRE LEADS OTTOM (IP67) Standard Wire: 0 AWG UL 007 REF Available options - must specify AWG UL0 AWG UL06 6AWG UL0 GRAY N.C. LUE N.O. NC NO COM LACK COM 05±.5 J 6

100 ZMSM Series with Mounting Hole Subminiature Snap-acting Switches (IP65) MOUNTING STYLES M NO SUPPORT POSTS L TWO SUPPORT POSTS LEFT R TWO SUPPORT POSTS RIGHT T ONE SUPPORT POST LEFT & RIGHT 5 TYP 9.5 TYP.6 TYP. TYP J MODEL SHOWN: ZMSMHXXXXP00PMC POSTS LEFT POSTS RIGHT LEFT & RIGHT MODEL SHOWN: ZMSMHXXXXP00PLC MODEL SHOWN: ZMSMHXXXXP00PRC MODEL SHOWN: ZMSMHXXXXP00PTC Snap-acting C W Y SPDT (Single Pole, Double Throw) SPST, NC (Single Pole, Single Throw, Normally Closed) SPST, NO (Single Pole, Single Throw, Normally Open) CIRCUITRY Third Angle Projection J 6

101 MDS Series Micro Snap-acting Detect Switches Features/enefits Snap-acting tactile feel Small package size Available in vertical or right angle PC mount RoHS compliant and compatible Typical Applications Detect the presence of a mechanical device Medical devices Consumer electronic devices ATCA applications Specifications CONTACT RATING: 0 VDC. MECHANICAL & ELECTRICAL LIFE: 0,000 operations. CONTACT RESISTANCE: 00 m Ω max. inital OPERATING TEMPERATURE: 5ºC to +70ºC. SOLDERAILITY: According to lead free solder profiles. PACKAGING: Available in bulk or tape and reel. OPERATING FORCE: 50g Max. RELEASE FORCE: g Min. Materials ASE: PA9T COVER & ACTUATOR: PA9T MOVALE CONTACT: Copper alloy, silver plated. STATIONARY CONTACTS: Copper alloy, silver plated. TERMINALS: Copper alloy, silver plated. NOTE: MDS series is RoHS compliant, and compatible. See technical data section of this catalog for RoHS compliant and compatible definitions and specifications. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. J uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-66 through J-70. For additional options not shown in catalog, consult Customer Service Center. M D S Snap-acting Series MDS SPDT Operating Force grams Electrical Rating 00A 0 VDC Actuator L0 Standard lever L0 Higher OP lever Termination Style PS PC Thru-hole, Short PL PC Thru-hole, Long RS PC Thru-hole, Short, Right bend RL PC Thru-hole, Long, Right bend LS PC Thru-hole, Short, Left bend LL PC Thru-hole, Long, Left bend SL SMT, Left SR SMT, Right CL SMT, Left bracket with pins CR SMT, Right bracket with pins L SMT, Left bracket no pins R SMT, Right bracket no pins J 65

102 MDS Series Micro Snap-acting Detect Switches SERIES M D S,, 7 L0 LEVER 0 7 R0,6 "C",6 7 L0 LEVER NC (COMMON) NO SCHEMATIC SPDT RECOMMENDED DIRECTION OF CAM ENGAGEMENT "D" "A" "" OPERATING CHARACTERISTICS LEVER L0 LEVER L0 8,,6 X,6,7 OPERATING POSITION DIM 'A' /-0.5 FREE POSITION DIM '' 8 MAX 8.5 MAX PRETRAVEL DIM 'C',8 MAX.8 MAX OVER TRAVEL DIM 'D' 0. MIN 0. MIN CONTACT RATING 0 VDC 0VDC OPERATING FORCE 50 GRAMS F. MAX 50 GRAMS F. MAX J Snap-acting OPERATING FORCE OPTION CODE 65 OPERATING FORCE 50 grams max. ELECTRICAL RATING OPTION CODE ELECTRICAL RATING 00A 0 V DC ACTUATOR L0 STANDARD LEVER L0 HIGHER OP LEVER, 7, 7, L0 LEVER,6 L0 LEVER Third Angle Projection J 66

103 TERMINATIONS MDS Series Micro Snap-acting Detect Switches PC Mounting Pattern,5 0,08 TYP,5±0,08,5±0,08 PC MOUNTING PS PC THRU-HOLE, SHORT STRAIGHT PL PC THRU-HOLE, LONG STRAIGHT X,5,86 X,5 COM NO NC X, X,86 X 5, COM NO NC, 0,5 TYP X,5 TYP X 0,5, 0,5 TYP 0,8 TYP,5 TYP X 0,5 J RS PC THRU-HOLE, SHORT RIGHT END RL PC THRU-HOLE, LONG SHORT END X,5 X,5 COM NO NC,5 TYP X, 0,8 X 0,5 Snap-acting X 0,5 COM NO NC X,5, TYP 0,8 TYP,5 TYP X,5 0,8,5, TYP 0,8 TYP,6 LS PC THRU-HOLE, SHORT LEFT END LL PC THRU-HOLE, LONG LEFT END X,5 X,5 0, X 0,5 0, NC NO COM X,5 0, X 0,5, TYP 0,8 TYP,5 TYP X, 0,8 NC NO COM,6,5, TYP 0,8 TYP,5 TYP X 0,8 J 67

104 MDS Series Micro Snap-acting Detect Switches TERMINATIONS SL SMT, LEFT MOUNT SR SMT, RIGHT MOUNT X,7 X,5 X 0, X,7 X 0, X,5, TYP X 0,8,5 X 0,5 X,7, TYP X 0,8,5 TYP X 0,5 X,7 SMT Mounting Pattern SMT Mounting Pattern (,8) TYP (,5) TYP (,8) TYP (,5) TYP (,5) TYP (,5) TYP J Snap-acting CL SMT, LEFT RACKET WITH PINS,6 0 X,78 TYP 8,7 TO CENTER OF POSTS 9, 0,5 5,7 OPERATING POS. FROM CENTER OF POST,08 X 0,85 0,5, X,05 X,66 8, X,7 8, X, X 0,8 TYP,5 TYP X 0,76 0,05 X 0,5 X,7 X 0,9 0,05 HOLE X,8,5 8,7 X,5,5,6 CR SMT, RIGHT RACKET WITH PINS 0,6 8,7 TO CENTER OF POSTS 0,5 9, X,78 TYP,08 X 0,85 0,5 X,66 5,7 OPERATING POS. FROM CENTER OF POST, X,05 8,,7 8, X, X 0,8,5 TYP X 0,76 0,05 X 0,5 X,7 X 0,9 0,05 HOLE X,8,5 8,7 X,5,5,6 J 68

105 TERMINATIONS MDS Series Micro Snap-acting Detect Switches L SMT, LEFT RACKET NO PINS X 0,65 0,5 9,,08,5 OPERATING POS. TO CENTER OF SMT PAD X, X,05 X,66 OF PADS 8, X,7 8, X,8 6,6, TYP 0,8 TYP,5 TYP X 0,5 TYP X,7 TYP,5,5 X,5 R SMT, RIGHT RACKET NO PINS 0 X,,65 9, 0,5,08,5 OPERATING POS. TO CENTER OF SMT PAD X,05 X,66 J Snap-acting 8, OF PADS X,8 6,6 8, X,7, TYP 0,8 TYP,5 TYP X 0,5 X,7,5,5 X,5 J 69

106 MDS Series Micro Snap-acting Detect Switches TAPE AND REEL SL SMT, LEFT MOUNT SR SMT, RIGHT MOUNT,75 A 0, TYP 0, TYP,5 TYP 0,5,5 9,8, A 0, TYP 8,6 6,7 SECTION A-A PULLING-OUT DIRECTION OF THE TAPE 5 SECTION - J Snap-acting CL SMT, LEFT MOUNT CR SMT, RIGHT MOUNT L SMT, LEFT MOUNT R SMT, RIGHT MOUNT,75 0, TYP,5 TYP A 0, TYP 0,5,5,5,5 5,5 A 8,6 6,7 6 0, TYP SECTION A-A 5 SECTION - PULLING-OUT DIRECTION OF THE TAPE Supplied in carrier tape meeting the EIA-8- standard for mm tape. Packaging quantity: SL and SR;,600 pieces per reel CL, CR, L and R;,000 pieces per reel J 70

107 H Series Single Pole Standard Precision Snap-acting Switches Features/enefits Low differential travel, high repeatability Long life50,000 cycles typical Single and double pole circuitry Sealed actuator and case Typical Applications Thermostats Motors Industrial controls Specifications CONTACT RATING: From low level* to 0 80 V AC; see ELECTRICAL RATING option section for complete listings. ELECTRICAL LIFE: 50,000 cycles at 0 50 V AC. consult Customer Service Center for typical life at other ratings. INSULATION RESISTANCE:,000 M ohm min. DIELECTRIC STRENGTH:,500 Vrms sea level. OPERATING TEMPERATURE: 67ºF to 0ºF ( 55ºC to 50ºC). OPERATING FORCE: From oz. to 6 oz. max. at actuator button available. MOUNTING SCREWS: Torque in/lbs max. (Note: Exceeding in/lbs torque may change operating characteristics and increase the possibility of cracking switch case). TERMINAL SCREWS: Torque in/lbs max. PANEL MOUNTING USHING: Torque -6 in/lbs max. DEGREE OF PROTECTION: IP65; Dust-proof, water splash and dew condensation. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. Materials SWITCH HOUSING: Heat resistant/electrical grade phenolic. INSERTS: rass alloy. ACTUATOR UTTON: Moisture resistant phenolic. SPRING: Copper alloy. PIVOT: rass alloy. MOVALE CONTACTS: Gold alloy for ratings AMP or less. Fine silver for ratings greater than AMP and motor load ratings less than / 5 V AC. Silver alloy for motor load ratings / 5 V AC or greater. STATIONARY CONTACTS: Gold alloy for ratings AMP or less. Fine silver welded to copper base for ratings greater than AMP and motor load ratings less than / 5 V AC. Silver alloy on copper base for motor load ratings / 5 V AC or greater. TERMINALS: rass alloy, bright tin plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. J Snap-acting uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-7 through J-76. For additional options not shown in catalog, consult Customer Service Center. H S S C Series H Precision Snap-acting Switches Function S SP Contact Separation.00".00".00" 7.070" Electrical Rating 0 A, 5, 50, 80 V AC; 0.5 A, 50 V DC; 0.5 A, 5 V DC A 5 A, 5, 50 V AC 6 0 A, 5, 50, 80 V AC; 0.5 A, 50 V DC; 0.5 A, 5 V DC; / HP, 5 V AC; / HP, 5O V AC F5 F9 A,5 V AC; A, O V DC A, 5, 77 V AC; 5 A, 80 V AC; / HP, 5 V AC; / HP, 50 V AC Operating Force KG 8 oz./50 grams GF oz./ grams KA 9 oz./55 grams KC oz./68 grams KH 0 oz./567 grams P 6 oz./77 grams Mounting Style S Standard Actuator P0 Pin plunger A0 Lever roller D0 Stub plunger F0 Reverse acting lever roller J0 High overtravel plunger R5 Perpendicular roller plunger T0 Lever TS Sealed Lever Y0 Reverse acting lever Circuitry C SPDT Terminations Flat base, solder, -0 screws Flat base,.50" quick connect 55 Step base, cup washers, 6- screws J 7

108 H Series Single Pole Standard Precision Snap-acting Switches Sealed Actuator and Case To provide reliable service under environmental conditions that might damage standard precision switches, various H Series switch models are sealed against the entrance of airborne contaminants and/or splashing liquids. The clearance between the operating plunger and the cover is sealed with a silicone boot and the base cover joint is sealed with an epoxy adhesive. These models are designed to meet requirements of IP65 (dust proof, water splash and dew condensation). For additional information on sealed switches, consult our Customer Service Center. SERIES H PRECISION SNAP-ACTING SWITCHES FUNCTION S SINGLE POLE SWITCH J OPER. POS..65 ±.05 (5,88 ± 0,8) Snap-acting Single Pole NOTE: To select switching function, see CIRCUITRY section, page J-5. CONTACT SEPARATION OPTION CODE 7 NOMINAL CONTACT SEPARATION (in./mm).00 (0,5).00 (0,5).00 (,0).070 (,78) Switches with AMP rating (option code F5 ) are available only with.00 contact separation (option ). Switches with / HP, 5 V AC rating or greater (option codes 5 and 6 ) are not available with.00 contact separation (option code )..000 DIFFERENTIAL TRAVEL SPECIFICATION LIMITS FOR VARIOUS CONTACT SEPARATIONS.000 INCH CONTACT SEPARATION Dimensions are are shown: Inches (mm) J 7

109 H Series Single Pole Standard Precision Snap-acting Switches OPERATING FORCE OPTION CODE KG MAXIMUM OPERATING FORCE (OZ./GRAMS) 8 50 STANDARD CONTACT SEPARATION (inch).00 CONTACT SEPARATION OPERATING FORCE SPECIFICATION LIMITS FOR VARIOUS CONTACT SEPARATIONS OUNCES GF KA KC KH STANDARD RANGE MAXIMUM LIMITS AVAILALE P NOTE: All listed differential travel characteristics are based on standard operating force andcontact separation. For any other force or contact separation, consult Customer Service Center. Operating force varies with actuator option, see ACTUATOR option section. ELECTRICAL RATING OPTION CODE A 6 F5 F9 MOVALE CONTACT Fine silver. Precious metal alloy. Gold alloy. Fine silver. STATIONARY CONTACT Fine silver welded to copper base. Precious metal alloy. Gold alloy. Fine silver welded to copper base. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. ELECTRICAL RATING 0 5, 50 & 80 V AC; V DC; V DC (UL). 5 5 & 50 V AC (UL). 0 5, 50 & 80 V AC; V DC; V DC; / 5 V AC; / 50 V AC (UL). Low level* to 5 V AC; 0 V DC (UL). 5 & 77 V AC; 5 80 V AC; / 5 V AC; / 50 V AC; 77 V AC (UL). J Snap-acting AVAILALE COMINATIONS OPERATING FORCE (oz.) ELECTRICAL RATING A 6 F5 F GF KA KC KG KH P x x x x x x x x x AVAILALE x NOT AVAILALE All models with all options Consult Customer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. J 7 Dimensions are shown: Inch (mm)

110 H Series Single Pole Standard Precision Snap-acting Switches S Standard MOUNTING STYLE NOTE: Mounting holes will accept pins or screws of.9 dia. (,5) max. on.000 ±.00 (5, ± 0,05) centers. NOTE: Torque mounting screws inlbs max. ACTUATOR OPTION CODE A0 NO. POLES SP FIG. DIM. A.86 (,8) DIM..0 ±.060 (8,5 ±,5) DIM. C.8 dia. (9,7Ø) DIM. D.0 (6,) D A C D C A D0 SP.9 (,).8 ±.00 (, ± 0,5) J Snap-acting F0 J0 P0 R5 T0 TS* Y0 SP SP SP SP SP SP SP (,).86 (,8).9 (,).9 (,).0 (,7).7 (7,).05 (,).0 ±.050 (8,5 ±,7).860±.00 (,8±0,76).65 ±.00 (5,88 ± 0,5).6 (5,7).70 ±.060 (8,8 ±,5).70 ±.060 (8,8 ±,5).70 ±.00 (8,9 ± 0,76).8 dia. (9,7Ø).50 dia. (,7Ø).0 dia. (6,Ø)).0 dia. (6,Ø).7 dia. (8,8Ø).7 (8,8) 0.6 (5,5).65 (6,7) FIG. Lever Roller A FIG. Lever Roller FIG. Stub Plunger * Actuators sealed against the entrance of airborne contaminants and/or splashing liquids. C 0. (8,0) Dia. A A A D.60 ±.00 PANEL MOUNTING FIG. 5 Pin Plunger FIG. Plunger.50 DIA. (,70?) FIG. 6 Perpendicular Roller Plunger D C A C A FIG. 8 Reverse Acting Lever FIG. 7 Lever J 7 Dimensions are shown: Inches (mm)

111 H Series Single Pole Standard Precision Snap-acting Switches ACTUATOR OPTION CODE ACTUATOR A0 D0 F0 J0 P0 R5 T0 Y0 * SEALED ACTUATOR TS GF 5 KA MAXIMUM OPERATING FORCE (OZ./GRAMS) KC KG KH P GF 8 KA MINIMUM RELEASE FORCE (OZ./GRAMS) KC KG KH P J NOTE: For basic switch operating forces, see page J-7. * Actuators sealed against the entrance of airborne contaminants and/or splashing liquids. MAXIMUM DIFFERENTIAL TRAVEL (IN/MM) MAXIMUM PRETRAVEL (IN/MM) MINIMUM OVERTRAVEL (IN/MM) OPTION CODE GF KA KC KG KH P GF KA KC KG KH P GF KA KC KG KH P.00 (0,5).06 (,57).080 (,0).5 (,8). (7,9). (7,9).8 (9,7).8 (9,7).56 (,96).56 (,96).56 (,96).56 (,96).0005 (0,0).00 (0,05).00 (0,76).007 (0,8).00 (0,5).00 (0,5).05 (0,6).00 (0,76).055 (,0).055 (,0).055 (,0).055 (,0).005 (0,).008 (0,0).00 (0,5).00 (0,76) 0.8 (,0) 0.8 (,0) 0.9 (,) 0.9 (,).06 (,5) 0.9 (,) 0.9 (,) 0.9 (,) ACTUATOR A0 D0 F0 J0 P0 R5 T0 Y0.05 (0,8).00 (0,5).05 (0,6).00 (0,76). (5,6). (5,6). (5,6). (5,6).0005 (0,0).0005 (0,0).00 (0,05).00 (0,08).00 (0,08).005 (0,).00 (0,5).05 (0,8).00 (0,5).05 (0,6).05 (0,6).00 (0,76).005 (0,).005 (0,).005 (0,).005 (0,).005 (0,).005 (0,).05 (0,8).00 (0,5).05 (0,6).00 (0,76). (,58). (,58). (,58). (,58).07 (,9).078 (,98).09 (,6).56 (,96).8 (9,7).8 (9,7).8 (9,7).8 (9,7).9 (,8).9 (,8).9 (,8).9 (,8).005 (0,).009 (0,).00 (0,5).0 (0,79).09 (,).09 (,) 0.9 (,) 0.9 (,).06 (,5) 0.9 (,) 0.9 (,) 0.9 (,) * SEALED ACTUATOR TS.07 (,9).078 (,98).09 (,6).56 (,96).8 (9,7).8 (9,7).8 (9,7).8 (9,7).9 (,8).9 (,8).9 (,8).9 (,8) Snap-acting Dimensions are shown: Inch (mm) J 75

112 H Series Single Pole Standard Precision Snap-acting Switches TERMINATIONS FLAT ASE, SOLDER TERMINALS AND -0 SCREWS FLAT ASE,.50" QUICK CONNECT TERMINALS NOTE: Switches with flat base option have molded ribs that provide increased creep distance. J 55 STEP ASE, 6- SCREWS AND CUP WASHERS Snap-acting NOTE: Switches with step base option provide wide electrical clearance for screw terminal options. CIRCUITRY C DT (Double Throw, Normally Closed & Normally Open) J 76 Dimensions are shown: Inches (mm)

113 A Series General Purpose Snap-acting Switches Features/enefits Low costhigh performance Long electrical life Single and double pole Sealed actuator option available Typical Applications Enclosure equipment Garage door openers Vending machines Specifications CONTACT RATING: From low level* to 0 77 V AC. ELECTRICAL LIFE: 75,000 cycles at 5 50 V AC, 00,000 cycles at 5 50 V AC. INSULATION RESISTANCE:,000 M ohm min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERATING TEMPERATURE: 67ºF to 85ºF ( 55ºC to 85ºC). OPERATING FORCE: 0 oz. (567 grams) max. SP models. 0 oz. ( grams) max. DP models at actuator button. MOUNTING: Torque screws in/lbs max. MOUNTING NUT: 0 in/lbs max. torque * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA 0 V AC or DC max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials SWITCH HOUSING: Heat resistant phenolic (UL 9V-0). ACTUATOR UTTON: Heat resistant phenolic (UL 9V-0). SPRING: Copper alloy. PIVOT: rass alloy for models up to 5 AMPS. Copper for 5 AMP models. MOVALE CONTACTS: Gold alloy for ratings AMP or less. Fine silver for ratings up to 5 AMPS. Silver alloy for ratings of 0. AMPS. STATIONARY CONTACTS: Gold alloy on brass base alloy for ratings AMP or less. Fine silver welded on brass base alloy for ratings greater than AMP up to 5 AMPS. Fine silver welded on copper alloy for ratings 0. AMPS. TERMINALS: rass alloy for AMP up to 5 AMPS. Copper alloy for 0. AMPS. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-78 through J-8. For additional options not shown in catalog, consult Customer Service Center. J Snap-acting A A Series A General Purpose Snap-acting Switches No. Poles S SP D DP Operating Force KH* 0 oz./567 grams PD** 0 oz./850 grams GG*5 oz./ grams PF**0 oz./ grams * Single Pole ** Double Pole Electrical Rating C 5 A, 5, 5O V AC; / HP, 5 V AC; / HP, 50 V AC F 5 A, 5, 50 V AC; HP, 5 V Ac; HP, 50 V AC; A, V DC F5 A, 5 V AC, O V DC Actuator P0 Pin plunger T0 Lever A0 Lever roller A Lever roller, high force Large red button Large black button J0 High overtravel plunger L0 Leaf Q0 High operating position plunger W0 Leaf roller Terminations A.50" quick connect Circuitry C DT W ST N.C. Y ST N.O. J 77 Dimensions are shown: Inch (mm)

114 A Series General Purpose Snap-acting Switches SERIES A GENERAL PURPOSE SNAP-ACTING SWITCHES NO. POLES S SINGLE POLE SWITCH J Snap-acting Mounting holes will accept pins or screws of.9 dia. (,5) max., on.000 (5,0) centers. D DOULE POLE SWITCH Mounting holes will accept pins or screws of.9 dia. (,5) max., on.000 (5,0) centers. NOTE: To select switching function, see CIRCUITRY section, page J-8.. J 78 Dimensions are shown: Inches (mm)

115 OPERATING FORCE A Series General Purpose Snap-acting Switches OPTION CODE KH PD GG PF NO. POLES SP DP SP DP ASIC SWITCH OPERATING FORCE (OZ./GRAMS) NOTE: Operating force varies with actuator, see ACTUATOR option section. ELECTRICAL RATING CONTACT MATERIAL J OPTION CODE C F F5 All models MOVALE CONTACT Fine silver. Silver alloy. Gold alloy. with all options. STATIONARY CONTACT Fine silver welded on brass base alloy. Silver welded on copper base alloy. Gold alloy on brass base alloy. ELECTRICAL RATING 5 5 & 50 V AC; / 5 V AC; -/ 50 V AC. 5 5 & 50 V AC; 5 V AC; 50 V AC; V DC. From low level* to 5 V AC, 0 V DC. Contact Customer Service Center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, Snap-acting i.e., 0. VA 0 V AC or DC max. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. AVAILALE COMINATIONS ELECTRICAL RATING C F OPERATING FORCE (OZ./GRAMS) GG KH PD PF x F5 AVAILALE x NOT AVAILALE J 79 Dimensions are shown: Inch (mm)

116 A Series General Purpose Snap-acting Switches ACTUATOR OPTION CODE FIG. DIM. A DIM. DIM. C DIM. D DIM. E DIM. F A P0.50 (,7).85 ±.00 (7, ± 0,76) A0.8 (5,).78 ±.06 (8, ±,57).75 dia. (9,5Ø).50 (,7).50 (,7) A (,8).50 (8,).50 (8,).78 ±.06 (8, ±,57).0 ± 0. (0, ±.5).0 ± 0. (0, ±.5).75 dia. (9,5Ø).98 dia. (,9Ø).98 dia. (,9Ø).50 (,7) FIG. High Overtravel Plunger NOTE: The H0 high overtravel plunger option provides.00 (,5) min. overtravel and longer mechanical life (,000,000 operations typical). J (,7).80 ±.00 (0,6 ± 0,8).8 (9,7).5 dia. (6,Ø) A L0.6 (,). ±.06 (7,9 ±,57).50 (,7) C Q (,7).670 ±.00 (7,0 ± 0,76).8 (9,6).5 dia. (6,Ø) T (8,).8 ±.06 (8,08 ±,57).50 (,7).50 (,7) W (8,).80 ±.06 (0, ±,57).75 dia. (9,5ø).50 (,7) FIG. Leaf J E D A C E D A C Snap-acting FIG. Lever Roller F FIG. Lever roller (High Force) A A PANEL MOUNTING D C C PANEL MOUNTING..00 (8,8 0,08) 6- NC THD places FIG. 5 High Overtravel Plunger Torque 0 in/lbs max. (Nut).80±.00 (9,65±0,08)? FIG. 6 lack utton Red utton 0. DIA. min places C A D A C D FIG. 7 Lever FIG. 8 Leaf Roller J 80 Dimensions are are shown: Inches (mm)

117 ACTUATOR A Series General Purpose Snap-acting Switches SWITCH CHARACTERISTICS MAXIMUM OPERATING FORCE (OZ./GRAMS) MINIMUM RELEASE FORCE (OZ./GRAMS) MAXIMUM PRETRAVEL MINIMUM OVERTRAVEL OPERATING POSITION OPTION CODE GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P. A (7,9).87 (7,9) (,75).78 (8,) A (6,). (5,6).78 (8,) (,7) 050 (,7) (,7).050 (,7) J (,7).87 (,75) L (7,). 06 (,57). (7,9) P (,7).050 (,7) Q (,7).050 (,7) T (7,9).87 (,75) (7,9) J NOTE: For basic switch operating forces, see page J-77. A W0.50" QUICK CONNECT TERMINATIONS.8 (7,).06 (,57).78 (8,) Snap-acting NOTE: Terminals can be supplied at various angles. Other terminal styles can be supplied for special applications. Consult Customer Service Center for special requirements. Washer and nut ship with switch CIRCUITRY C W Y DT (Double Throw, Normally Open & Normally Closed) ST N.C. (Single Throw, Normally Closed) ST N.O. (Single Throw, Normally Open) NOTE: To select number of poles, see NO. POLES section, page J-56 J 8 Dimensions are shown: Inches (mm)

118 TL Series Door Interlock Switches Features/enefits Push/pull motion Multiple mounting configurations Wide variety of termination options Ratings up to 5 AMPS Typical Applications Computer enclosures Panel builders Industrial enclosures J Snap-acting Specifications CONTACT RATING: 5 5 & 50 V AC; V DC; V DC; / 5 & 50 V AC; 5 V AC L. ELECTRICAL LIFE: 50,000 cycles at 5 50 V AC. INSULATION RESISTANCE:,000 M ohm min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERATING TEMPERATURE: 67ºF to 0ºF ( 55ºC to 50ºC). NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials SWITCH HOUSING: Thermoplastic or general purpose phenolic (UL 9V-0). MOUNTING RACKET: Stainless steel. PLUNGER: Stainless steel. ACTUATOR UTTON: Thermoplastic (UL 9V-0). SPRING: Copper alloy. PIVOT: rass alloy. MOVALE CONTACT: Fine silver. STATIONARY CONTACTS: Fine silver. TERMINALS: Copper alloy. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-8 and J-8. For additional options not shown in catalog, consult Customer Service Center. Model TL One TM Series SPDT switch TL One TM Series SPDT switch TL Two TM Series SPDT switches Terminations 60 Screw 0.87" Quick connect A.50" Quick connect Plunger Stainless steel, not tapped Stainless steel, tapped Dimensions are shown: Inch (mm) J 8

119 TL Series Door Interlock Switches MODEL TL WITH SMALL RACKET.87 [7,].75 MAX. FREE POS. [9,5].0 MIN. OPER. POS. [5,6].65 [6,7].5 [6,] STAINLESS STEEL PLUNGER.06 [0,].5 [6,].79 [,55].5MAX DEPRESSED POS. [,8].8 [0,6]. [5,].00 [,0].500 [,7] 6- NC THD. ().8 [5,5].8 [,] FLEXILE INSULATOR TL TL60 SPDT WITH LARGE RACKET.6.5 [6,6] [].59 [0,] J Snap-acting.87 [7,].75 MAX.FREE POS. [9,5].65 [6,7].5 []. [8,7].0 MIN. OPER. POS. [5,6].5 MAX DEPRESSED POS. [,8].05 () [7,75]. [8,7].8 [6].50 [8,].75 [9,].50 [8,].5 [6,] STAINLESS STEEL PLUNGER. [5,] FLEXILE INSULATOR TL60 SPDT.6 [] 6- NC THD. (5).59 [0,] Torque screws to 6in lbs max J 8 Dimensions are shown: Inches (mm)

120 TL Series Door Interlock Switches TL WITH TWO SWITCHES. [,5].65 [6,7].5 [] MODEL.87 [7,].75 MAX. FREE POS. [9,5].0 MIN. OPER. POS. [5,6].5MAX DEPRESSED POS. [,8].09 [5,].906 [,0] STAINLESS STEEL PLUNGER. [5,].5 [6,].8 [,].8 [6].9 [5,56].687 [7,5] J.7 [6,9] 6- NC THD. ().79 [,55].8 [0,6].59 [0,5] FLEXILE INSULATOR TL60 SPDT Snap-acting 60 SCREW TERMINALS TERMINATIONS 0.87" QUICK CONNECT A.50" QUICK CONNECT Torque screws to 6in lbs max PLUNGERS STAINLESS STEEL, NOT TAPPED STAINLESS STEEL, TAPPED -0 x.75 (9,5) min. depth J 8 Dimensions are shown: Inches (mm)

121 DS Series Interlock Pushbutton Switches Features/enefits Snap-in mounting Reliable snap action mechanism Latch or momentary RoHS compliant Halogen free material Typical Applications Interlock switch Detection switch Circuit interrupt UL6058- Specifications FUNCTION: Single pole double throw / Double pole double throw MOUNTING TYPE: Snap in style Electrical ELECTRICAL LIFE: see ratings chart below DIELECTRIC STRENGTH: 500 V (50-60 sea level) INSULATION RESISTANCE: 00 M Ω min. INITIAL CONTACT RESISTANCE: 0 milli-ohms Materials HOUSING, COVER, ACTUATOR, KNO: PA 66/6 halogen free, UL9V-0 NO & NC FIXED TERMINALS: Copper alloy COMMON TERMINALS: Copper alloy, silver plate CONTACTS: Silver alloy / F5 rating gold plated over silver alloy RETURN SPRINGS: Stainless steel Operating Environment OPERATING TEMPERATURE: -0 C to +85 C J NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. uild-a-switch To order, simply select desired option from each category and place in the appropriate box. Snap-acting D S Designation DS DS Series Number of Poles SPDT DPDT Rating F5 0. 5/50 V AC 50/60 Hz 50E 0.A 5/50 V AC 50/60 Hz 50E F7 0. 5/50 V AC 50/60 Hz 0E 0.A 5/50 V AC 50/60 Hz 0E D6 0 V AC 50/60 Hz 50E 0A 5 / 50 V AC 5/50 V AC 50/60 Hz 0E D7* 6A V AC /HP 5/50 V AC 50/60 Hz 0E 6 (6) V AC 50/60 Hz 0E * Note - 6A version has Q terminals only International Rating Symbols 0E Cycles 0,000 0E Cycles 00,000 50E Cycles 50,000 0() Current rating: First number represents resistive rating. Second number represents inductive (motor) rating GP General purpose rating UL05 Housing Color NONE White lack Terminals Q.8 x 0.5 Q.8 x 0.8 Q 6. x 0.8 Actuator Style A Momentary, Short button Momentary, Long button C Momentary/Pulled out button (not available on D7 rating) J 85

122 DS Series Interlock Pushbutton Switches NUMER OF POLES SPDT.75 COM NC NO 7. SCHEMATIC DIM "A" R DIM "" R.7 MAX 5 R.5 PANEL MOUNTING PANEL THICKNESS DIM "A" mm DIM "" mm J Snap-acting REF COM NC N0 X PUSH OVER TRAVEL MAX OPERATING POSITION (PUSH) FREE POSITION ON AT REST OPERATING POSITION (PULL) MAX TRAVEL (PULL). 9.5 DPDT 9.9 COM NC NO NC NO COM 7. SCHEMATIC DIM "A" X R.5 DIM "" 5 X R.7 PANEL MOUNTING PANEL THICKNESS DIM "A" mm DIM "" mm.6. COM NC N0 0.8 TYP N0 NC COM PUSH OVER TRAVEL MAX OPERATING POSITION (PUSH) FREE POSITION ON AT REST OPERATING POSITION (PULL) MAX TRAVEL (PULL) X MAX 9.8 J 86

123 ACTUATOR STYLE / SPECIFICATIONS DS Series Interlock Pushbutton Switches A SHORT UTTON LONG UTTON C MOMENTARY/PULLED OUT AT REST POSITION AT REST POSITION AT REST POSITION PULLED OUT SHORT UTTON LONG UTTON FREE POSITION PULLED OUT POSITION SPDT Specification UTTON STYLE OVER TRAVEL POSITION PUSH MAX OVER TRAVEL POSITION PULL MAX OPERATING POSITION PUSH A.0 NA 8.90 ± NA 9.55 ±.5 OPERATING POSITION PULL NA NA FREE POSITION AT REST.5 ± ± 0.75 OPERATING FORCE 5 gf 5 gf J C.0 DPDT Specification ±.5 OVER TRAVEL UTTON OVER TRAVEL OPERATING STYLE POSITION POSITION POSITION PUSH MAX PULL MAX PUSH A.0 NA 8.90 ± NA 9.55 ±.5.60 ±.5 OPERATING POSITION PULL NA NA 9.0 ± 0.75 FREE POSITION AT REST.5 ± ± 0.75 PUSH 85gf PULL 75gf OPERATING FORCE 680 gf 680gf Snap-acting C ±.5.60 ± ± 0.75 PUSH 560gf PULL 750gf TERMINALS Q.8 x 0.5 Q.8 x 0.8 Q 6. x Q-0.5 THK Q-0.8 THK 6. Q-0.8 J 87 Third Angle Projection

124 Tactile Switches Product Selection Guide Surface Mount Series KXT KMT KMT0 KMR- KMS PTS55 PTS50 Size on PC L x W (mm) Total Height (mm) x 0,58 x,6 0,65 x,6 0,65, x,8, x,55 5, x 5,,9,5, 0,8 and,5,5 x,5 0,55 and 0,65 Tactile Switches Travel (mm) Actuation Force (N) Contact Type Max. Voltage (V) 0, 00 gf 80gf 0 gf Silver 0,5,0,6 0,5,0;,6,;, 0, to 0,5 0,5 to 0, 0,,;,0,0;,0,0,0,6,6 Silver Silver Silver / Gold Silver / Gold Silver 0,,0;,6;,0;,6;,0; 6,0 Silver Max. Switching Power (VA) 0,5 0,5 0,5 / 0, / 0, _ Life Cycles 00,000 50,000 00,000/600,000,000,000 00,000 00,000 00,000 00,000 50,000 to,000,000 IP Rating IP6 IP5 IP68 IP0 IP0 IP0 - Page Number / Surface Mount Series PTS50 PTS80 PTS80 PTS80 KSR KSS KSCV Size on PC L x W (mm) Total Height (mm),7 x,7 0,55 / 0,65, x,,5,9 x,9,5/,0/,5,5 x,55,5 7,5 x,8 7, x,8,5 5,5 x,,7 holes ø, pads,5 x 0,8 5,0* Travel (mm) 0,5 0,5/0, 0, 0, 0, to 0,5 0, 0,7* Actuation Force (N) 60 gf 0 gf,6;,6;,0; 6,0,6,5,6,,;,0;,0;,5,5.5* Contact Type Silver Silver Silver Silver Silver / Gold Silver / Gold Silver / Gold Max. Voltage (V) 6 Max. Switching Power (VA) - - / 0, / 0, / 0, Life Cycles 00, ,000 50,000 to 50,000 00,000 00,000 00,000 00,000 00,000 00,000 00,000 IP Rating IP0 IP0 IP0 IP0 IP50 IP0 IP67 Page Number * Other options available by request

125 Tactile Switches Product Selection Guide SMT, Thru-hole Sealed High Performance Series KSC - 0 KSE KT K5AT K8 J G Footprint SA SA G G 6,8 x 6, 6,8 x 6, 0 x 6, 7,5x5 7,5x7 8, x 0,8 8, x 0,8 Total Height (mm), /, 6,6 7, with tab 6, 6 Travel (mm) 0,0 to 0,75 * 0, 0, to 0,5 0,5 0,5 Actuation Force (N), to 5,5 * Contact Type Silver / Gold Silver Silver / Gold Gold Silver / Gold Max. Voltage (V) 50 Max. Switching Power (VA) / 0. / 0. / 0. Life Cycles 00,000 to,000,000 00,000 00,000 5,000 00,000 IP Rating IP67 IP67 IP0 IP0 Page Number Thru-hole Series K5V KSF/KSI KSA KSA MKII KSA-V KSL KSL-V Footprint 8 x 9 x 7 / 9 x 7,6 x 5,08 7,6 x 5,08 7,6 x 5,08 7,6 x,5 7,6 x 5,08 7,6 x,5 Total Height (mm) 9 /,6,7 button option,7 8 9,9 8 Travel (mm), 0, to 0,5 0, to 0,5 0, to 0,5 0, to 0,5 0, to 0,5 0, to 0,5 Actuation Force (N) ,,0,,0 Contact Type Gold Silver / Gold Silver / Gold Silver / Gold Silver / Gold Silver / Gold Silver / Gold Max. Voltage (V) Max. Switching Power (VA) / 0. / 0. / 0. / 0. / 0. / 0. Life Cycles IP Rating 5,000 IP0 00,000 IP60 00,000 IP60 00,000,000,000 IP67 00,000 IP60 00,000 IP60 00,000 IP60 Page Number * Other options available by request

126 Tactile Switches Product Selection Guide Thru-hole Series KSJ KSJ-V PTS65 PTS65-V PTS6 PTS65 Footprint 7,6 x 5,08 7,6 x,5 6 x,5 7,0 x,5 6, x 6, 6 x 6 Tactile Switches Total Height (mm) Travel (mm) Actuation Force (N) Contact Type Max. Voltage (V) 6,65 0,55 to 0,7,0,0 0,55 to 0,7,0,0 Silver Gold Silver Gold 8,5, 5,0 0,5,,0,6 Silver, 0,5,,0 Silver,5,, 0,0 / 0,0 60 gf 50 gf 0 gf Silver,; 5,0; 7,0; 9,5; 0,5,;,6,0;,6 Silver Life Cycles 00,000 0,000 00,000 0,000 0,000 0,000 00,000 00,000 IP Rating IP60 IP60 IP0 IP0 IP0 IP0 Page Number Thru-hole Series PTS65-V PTS5 ITS KSH Footprint Total Height (mm) 7,0 x,5 7, x, 7, Sq. 8,5,0 variety of sizes available 6, x 6, 5,0 Travel (mm) 0,5 0,0 0,5, Actuation Force (N),;,6,0;,6,6,6 60 gf,6;,0;,5,0;,5 Contact Type Silver Silver Silver Silver Max. Voltage (V) Life Cycles 00,000 00,000 50,000 00,000 IP Rating IP0 IP0 IP0 IP0 Page Number

127 Features.0 x.0 mm footprint 0.58 mm thickness High number of cycle Typical Applications Wearable electronics In-Ear headphones, Earbuds Mobile Phones Portable Electronics Hearing Aids KXT Series Ultra Low Profile Top Actuated Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: G type for SMT TRAVEL: 0. mm ± 0.05 mm Mechanical Operating force Operating gf Life KXT LHS 00 ± 0 00,000 KXT LHS 80 ± 50 00,000 KXT LHS 0 ± 70 00,000 Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: VDC 50 ma 00 V AC (mn) 500 mω 00 MΩ 0 ms Environmental OPERATING TEMPERATURE: -0 C to 85 C STORAGE TEMPERATURE: -0 C to 90 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Tactile Switches Packaging In reels of 7,000 pieces Dimensions of reels according to EIA 8 External diameter 0 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Part Number Description For any part number different from those listed above, please consult your local representative. K X T L H S Total Height 0.58mm Actuation Force 00 gf 80 gf 0 gf Contact Material Silver LHS Lead free, RoHS, Halogen Free, Silver plated 5

128 KXT Series Ultra Low Profile Top Actuated SCHEMATIC Tactile Switches ± 0, 0,58 ±0,, ± 0, 0.8 ± 0. 0,5 ±0, Ø0,65 ±0, 0,0 ±0,0,5,8,6 ± 0, RECOMMENDED PC LAYOUT,5 ± 0, Cover tape (Polyester) Carrier tape (Polystyrene) Reel (Polystyrene) () Ø,5 +0, 0,75 Ø 0 9, Cover tape 5,5 ` 0, A ` 0,5 Ø,6` 0,8 Ø,8` 0,5 A(/) 6

129 Features Smallest footprint High number of cycles within the smallest packaging Smallest thickness with integrated actuator Ground pin option Halogen free KMT Series Nano-Miniature SMT Top Actuated Typical Applications Mobile Phones Hearing Aids MP accessories luetooth Headset Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: Gullwing type for SMT Mechanical Operating force Operating Tactile Type G and NG Newtons (grams) Life Feeling Travel mm KMT HF LFS.0 (00) ± ,000 0% 0.5 ± 0. KMT HF LFS.6 (60) ± ,000 0% 0.5 ± 0. Electrical MAXIMUM POWER: MAXIMUM VOLTAGE: MINIMUM VOLTAGE: MAXIMUM CURRENT DC: MINIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Silver 0.5 VA VDC 0 mv 50 ma ma 50 Vrms (mn) 50 mω 50 MΩ 6 ms Environmental OPERATING TEMPERATURE: STORAGE TEMPERATURE: Silver -0 C to 85 C -55 C (0 days) +85 C ( days) Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of,000 pieces. Dimensions of reels according to EIA 8 External diameter 80 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches Part Number Description For any part number different from those listed above, please consult your local representative. K M T HF L F Total Height 0.65 mm Actuation Force.0 N (00 grams).6 N (60 grams) Grounding Option G Ground Pin NG No Ground Pin Contact Material Silver Gold - please contact Customer Service Type HF Halogen Free LFS RoHS, silver plated LFG RoHS, gold plated - please contact Customer Service (inches) 7

130 KMT Series Nano-Miniature SMT Top Actuated KMT Series No Ground Pin ELECTRICAL DIAGRAM RECOMMENDED LAYOUT,,6,, Tactile Switches, ± 0, 0,06,6 (0,05) 0,6 0,65 ± 0, KMT Series With Ground Pin ø,,,6 ELECTRICAL DIAGRAM RECOMMENDED LAYOUT TAPE & REEL 0,95 ±0, 0,5 ±0,05 DE-REELING DIRECTION OUT OF THE TAPE SECTION A-A Draft 5 max,75 ±0, ±0,05 ±0,05 ø,5 +0, 0, ±0, ø±0, ±0,,6 ±0, ±0, +0, -0, 5,5 ±0,05,, 0,6,,6, ± 0, 0,6 0,65 ± 0, ø,,,6 0, 0,06 0,0 ±0,05 (0,05) 0,,6 0, A R0,5 A Draft 5 max,7 ±0,,8 ±0, 8

131 Features Smallest footprint Smallest thickness with integrated actuator Extended life cycles IP68 Ultra low current capabilities Specification FUNCTION: momentary action, normally open CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: J lead type for SMT Mechanical TRAVEL (mm): 0.5 ± 0. Operating force Tactile Operating Newtons (grams) Feeling Life KMT0NGJLHS.0 (00) ± 5% 0% 00,000 KMT0NGJLHS.6 (60) ± 5% 0% 00,000 KMT07NGJLHS. (0) ± 5% 0% 00,000 KMT0NGJLHS. (0) ± 5% 0% 00,000 Operating force Tactile Operating Newtons (grams) Feeling Life KMT0NGJLHS.0 (00) ± 5% 0%,000,000 KMT0NGJLHS.6 (60) ± 5% 0% 600,000 KMT07NGJLHS. (0) ± 5% 0% 600,000 KMT0 Series Nano-Miniature SMT Top Actuated Typical Applications Mobile Phones Hearing Aids MP accessories luetooth Headset Automotive keyless entry system Smoke and CO detectors E-readers Home automation remote controls Electrical MAXIMUM POWER: MAXIMUM VOLTAGE: MINIMUM VOLTAGE: MAXIMUM CURRENT DC: MINIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: 0.5 VA VDC 0 mv 50 ma ma 50 Vrms (mn) 50 mω 50 MΩ 6 ms Environmental OPERATING TEMPERATURE: -0 C to 85 C STORAGE TEMPERATURE: -55 C (0 days) +85 C ( days) Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 5,000 pieces. Dimensions of reels according to EIA 8 External diameter 80 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches Part Number Description For any part number different from those listed above, please consult your local representative. K M T 0 N G J L H S Total Height mm Actuation Force.0 N (00 grams).6 N (60 grams) 7. N (0 grams). N (0 grams) Contact Material Silver Silver long life Grounding Option NGJ No Ground Pin, J leads LHS Lead free, RoHS, Halogen free, Silver plated 9

132 KMT0 Series Nano-Miniature SMT Top Actuated Minimum actuator diameter is.0 mm. It is recommended to enlarge this diameter to a full flat surface covering the switch. ø mini,6 RECOMMENDED LAYOUT ELECTRICAL DIAGRAM Tactile Switches 0, 0,06,±0, H ( 0,05 ),,,,6,,6 TAPE & REEL DE-REELING DIRECTION 0,75±0, 0,5±0, OUT OF THE TAPE ±0,05 ±0,05 +0, ø,5 0 ø ±0,,,6±0, +0, -0, 5,5±0,05,75±0, A A,±0,,8±0,05 0

133 KMR Series Microminiature SMT Top Actuated Features/enefits Small footprint actuation forces Excellent tactile feel Ultra low current capabilities IP0 Typical Applications Automotive Industrial electronics Medical equipment Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: Gullwing type for SMT Mechanical Type G and NG See description below Operating force N (grs) Operating life (cycles) Travel (mm) KMR LFS. (0) ± , mm ± 0. KMR ULC LFS. (0) ± , mm ± 0. KMR LFG. (0) ± , mm ± 0. KMR ULC LFG. (0) ± , mm ± 0. KMR LFS.0 (00) ± , mm ± 0. KMR ULC LFS.0 (00) ± , mm ± 0. KMR LFG.0 (00) ± , mm ± 0. KMR ULC LFG.0 (00) ± , mm ± 0. KMR LFS.0 (00) ± , mm ± 0. KMR ULC LFS.0 (00) ± , mm ± 0. KMR LFS.0 (00) ± , mm ± 0. KMR ULC LFS.0 (00) ± , mm ± 0. KMR LFG.0 (00) ± , mm ± 0. KMR ULC LFG.0 (00) ± , mm ± 0. KMR LFS.0 (00) ±.00 00, mm ± 0. KMR ULC LFS.0 (00) ±.00 00, mm ± 0. KMR LFS.0 (00) ±.00 00, mm ± 0. KMR ULC LFS.0 (00) ±.00 00, mm ± 0. KMR LFG.0 (00) ±.00 00, mm ± 0. KMR ULC LFG.0 (00) ±.00 00, mm ± 0. Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mvdc 0 mvdc MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma* ma* DIELECTRIC STRENGTH: 50 Vrms CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: GΩ OUNCE TIME: ms *For ULC version minimum current is µa at.8 VDC Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 7,000 pieces External diameter 0 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches TACTILE FEELING: KMR series with actuation force in N - N - N: 0% KMR series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R Total height,9 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated Actuation Force. N (0 grams) N (00 grams) N (00 grams) N (00 grams) Contact Material Silver Silver long life* Gold Grounding option G Ground pin NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in N and N actuation force. For other versions, please contact Customer Service. 8 jun 6

134 KMR Series Microminiature Tact Switch for SMT Tactile Switches,,,7,6, 0,6,6 KMR Series -.9 mm height PC layout shown with ground pin option,,9,6,,8,5 0,55 0,6 0,6 5 TAPE & REEL DE-REELING DIRECTION OUT OF THE TAPE SECTION A-A 7 0 max, ± 0,,75 ± 0, ± 0,05 ø,5 ± 0, +0, -0, 5,5 ± 0,05 A A,95 ± 0, 0,9 ± 0,0 6 0 max GROUND TERMINAL ø,5 +0,5 0,0 ± 0, DIRECTION OF FEED 8 jun 6

135 KMR Series Microminiature SMT Top Actuated Features/enefits Small footprint actuation forces Excellent tactile feel Ultra low current capabilities IP0 Typical Applications Automotive Industrial electronics Medical equipment Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: Gullwing type for SMT Mechanical Type G and NG See description below Operating force N (grs) Operating life (cycles) Travel (mm) KMR LFS. (0) ± , mm ± 0. KMR ULC LFS. (0) ± , mm ± 0. KMR LFG. (0) ± , mm ± 0. KMR ULC LFG. (0) ± , mm ± 0. KMR LFS.0 (00) ± , mm ± 0. KMR ULC LFS.0 (00) ± , mm ± 0. KMR LFG.0 (00) ± , mm ± 0. KMR ULC LFG.0 (00) ± , mm ± 0. KMR LFS.0 (00) ± , mm ± 0. KMR ULC LFS.0 (00) ± , mm ± 0. KMR LFS.0 (00) ± , mm ± 0. KMRULC LFS.0 (00) ± , mm ± 0. KMR LFG.0 (00) ± , mm ± 0. KMRULC LFG.0 (00) ± , mm ± 0. KMR LFS.0 (00) ±.00 00, mm ± 0. KMR ULC LFS.0 (00) ±.00 00, mm ± 0. KMR LFS.0 (00) ±.00 00, mm ± 0. KMR ULC LFS.0 (00) ±.00 00, mm ± 0. KMR LFG.0 (00) ±.00 00, mm ± 0. KMR ULC LFG.0 (00) ±.00 00, mm ± 0. Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mvdc 0 mvdc MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma* ma* DIELECTRIC STRENGTH: 50 Vrms CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: GΩ OUNCE TIME: ms *For ULC version minimum current is µa at.8 VDC Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 6,000 pieces External diameter 0 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches TACTILE FEELING: KMR series with actuation force in N - N - N: 5% KMR series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R Total height,5 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated Actuation Force. N (0 grams) N (00 grams) N (00 grams) N (00 grams) Contact Material Silver Silver long life* Gold Grounding option G Ground pin NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in N and N actuation force. For other versions, please contact Customer Service. 8 jun 6

136 Tactile Switches,,,7,5 0,55 0,6,6 KMR Series Microminiature Tact Switch for SMT KMR Series -.5 mm height PC layout shown with ground pin option,8 0,6 0,6,5,6,,,6, 5 TAPE & REEL DE-REELING DIRECTION OUT OF THE TAPE SECTION A-A 6 0 max,75 ± 0,,75 ± 0, ± 0,05 ø,5 ± 0, +0, -0, 5,5 ± 0,05 A A,95 ± 0, 0,9 ± 0,0 6 0 max GROUND TERMINAL,0 ± 0, 8 jun 6

137 Features/enefits Compact size Excellent tactile feel ESD protection Positioning pegs for stability RoHS compliant and compatible KMS Series Microminiature SMT Side Actuated Typical Applications Mobile phones Medical handheld monitors Consumer electronics Telecommunication networks Specification FUNCTION: Momentary CONTACT ARRANGEMENT: SPST, N.O. TERMINALS: Gullwing type for SMT IP0 Sealed Mechanical OVERLOAD: 0N TACTILE FEELING: 5% min. for the N version 5% min for the.5n version Operating force Operating life Type Newtons (grams) (operations) Travel KMSG/GP N (00) ± K cycles 0,5 ± 0,5 KMSG/GP N (00) ± K cycles 0,5 ± 0,5 KMSG/GP N (00) ± K cycles 0, ± 0,5 KMSG/GP N (00) ± K cycles 0, ± 0,5 Packaging Tape and reels in reels of,000 pieces. External diameter 0mm ± mm. Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MAXIMUM CURRENT DC: 50 ma 0 ma MINIMUM CURRENT DC: ma ma DIELECTRIC STRENGTH: 50 VDC CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: 0 9 Ω OUNCE TIME: ms Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Tactile Switches Note: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Process Infared reflow soldering in accordance with IEC How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. K M S G Actuator Standard Actuation Force N (00 grams) N (00 grams) Termination G Gullwing Contact Material Silver Gold Pegs NONE No pegs P With pegs RoHS compliant and compatible LFS Lead free silver LFG Lead free gold 5

138 KMS Series Microminiature SMT Side Actuated KMS KMS WITH PEGS,,,6,,8,6, Tactile Switches,5 0,55,55,5,5 5,,7,8 0,6,6, 0,6 0,6 Electrical Diagram,5 0,55 0,55,55,,8, ø 0,75 0, 5,5 5,,7 0,6, 0,6 0,6,5 0,75 0,85 5 ø 0,9 mini,95,6 0,85 0,5,8,95 Electrical Diagram 5 TAPE & REEL,67 ± 0,,75 8 ± 0, ± 0,05 ø,5 ± 0,,65 ± 0, +0, -0, 5,5 ± 0,05 A R 0,5 ± 0, A,95 ± 0, 0,9 ± 0,0 7 0 max,5 ± 0, ± 0, ø,5 +0,5 0 WITH PEGS,67 ± 0, 8 ± 0, ± 0,05 ø,5 ± 0,,75,65± 0, +0, -0, 5,5 ± 0,05 A R0,8 R 0,8 A (x),95 ± 0, 0,9 ± 0,0 7 0 max ± 0, ø,5 +0,5 0 DIRECTION OF FEED 6

139 PTS 55 Series Microminiature Tact Switch for SMT Features/enefits 0.8 &.5 mm actuator height Ruggedized package in a compact size High number of cycles Typical Applications Consumer products Instrumentation Remote controls Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Environmental OPERATING TEMPERATURE: 5 VDC 0 ma 50 VA C (mn) 00 mω 00 MΩ 0 ms -0 C to 70 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging Switches in reels of: 5,000 pieces in 0.8 mm height,000 pieces in.5 mm height Dimensions of reels according to EIA 8 External diameter 0 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches How To Order Please see chart below for full part numbers. Part Number Height (mm) Leads Shape Ground Pin Force Travel (mm) Operating Life PTS55 SM08 SMTR LFS 0.8 G No 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SK08 SMTR LFS 0.8 G No 60 gf ± 50 gf 0.5 ± 0. 00,000 PTS55 SM5 SMTR LFS.5 G No 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SK5 SMTR LFS.5 G No 60 gf ± 50 gf 0.5 ± ,000 PTS55 SMG5 SMTR LFS.5 G Yes 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SKG5 SMTR LFS.5 G Yes 60 gf ± 50 gf 0.5 ± ,000 PTS55 SMG5J SMTR LFS.5 J Yes 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SKG5J SMTR LFS.5 J Yes 60 gf ± 50 gf 0.5 ± ,000 7

140 PTS 55 Series Microminiature Tact Switch for SMT PTS55 SM08 SMTR LFS PTS55 SK08 SMTR LFS 0,08 Max 5,8 6, SCHEMATIC DIA. 5,,8 0, 8,8 Tactile Switches PTS55 SM5 SMTR LFS PTS55 SK5 SMTR LFS,6 0,5 Ø,7 ± 0,,5 +0, 0 5, 5 0,85,8,8 RECOMMENDED PC LAYOUT 6, SCHEMATIC 8 0,5,8 5,,6,7± 0,05,8,8,6 5, RECOMMENDED PC LAYOUT PTS55 SMG5 SMTR LFS PTS55 SKG5 SMTR LFS 5,8 Ø 6 5,,6 0,8 (5,) 6, 5,,6 0,8,,5 SCHEMATIC 8 5,8, ,5,7` 0, SEE DETAIL,9 0, 5 0,05 DETAIL SCALE 0,8,8 Prohibited area for run 5 5,6,7 5,,6 RECOMMENDED PC LAYOUT 8

141 PTS 55 Series Microminiature Tact Switch for SMT PTS55 SMG5J SMTR LFS PTS55 SKG5J SMTR LFS Ø 6 0,8,,5` 0, 5 SCHEMATIC 0,5 5,,9 6 5,7,9 5,, 5,, 6 5 0,7,6 5,6 RECOMMENDED PC LAYOUT Tactile Switches TAPE & REEL 0.8 mm height 5,000 pieces per reel Cover tape (Polyester) Reel (Polystyrene) Carrier tape (Polystyrene) n,5 Cover tape 5,5 ` 0,,75 Max CARRIER TAPE 8 NOTE: n 0 n ` 0,5 ` 0,5 n ` 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5 9

142 PTS 55 Series Microminiature Tact Switch for SMT TAPE & REEL.5 mm height,000 pieces per reel Cover tape (Polyester) Tactile Switches Reel (Polystyrene) n,5 Carrier tape (Polystyrene) Cover tape,75 5,5 ` 0, Max n 0 CARRIER TAPE 8 n ` 0,5 ` 0,5 n ` 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5 0

143 PTS 50 Series Ultra Low Profile SMT Top Actuated Features/enefits.5 x.5 mm footprint 0.55 mm thickness High number of cycles Symbol line identification Typical Applications MP accessories luetooth headset Remote controls Garage door opener Specifications FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: Gullwing for SMT TRAVEL: 0.mm - 0. /+ 0.5mm Operating Operating Life Part Number Force (gf) (operations) PTS50 GN055 SMTR LFS 00 ± 0,000,000 PTS50 GM055 SMTR LFS 60 ± 0,000,000 PTS50 GH055 SMTR LFS 00 ± 0 00,000 PTS50 GK055 SMTR LFS 60 ± 0 00,000 PTS50 GG065 SMTR LFS 00 ± 70 00,000 PTS50 GS065 SMTR LFS /+00 50,000 Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Environmental OPERATING TEMPERATURE: VDC 50 ma 50 VA C (mn) 00 mω 00 MΩ 0 ms -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Tactile Switches Packaging Switches in reels of 7,000 pieces. Dimensions of reels according to EIA 8 External diameter 0 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 5 0 G S M T R L F S Termination G Gullwing Packaging SMTR Tape & reel LFS RoHS, silver plated Actuation Force N 00 gf M 60 gf H 00 gf K 60 gf G 00 gf S 600 gf ody Type mm height for 00, 60, 00 and 60 gf mm height for 00 and 600 gf

144 PTS 50 Series Ultra Low Profile SMT Top Actuated TERMINATION G GULLWING, ,55 MM HEIGHT ODY TYPE / ACTUATION FORCE Actuation force identification lines: Tactile Switches,5 +0,0-0,5, x0,5,5,5+0,5-0,5 0,55±0,5,, SCHEMATIC,85,85,8, N: 00 gf M: 60 gf No Lines H: 00 gf 065 0,65 MM HEIGHT ALTERNATIVE PC LAYOUT PART NUMER PTS 50 GS 065 SMTR LFS 0.7 PTS 50 GG 065 SMTR LFS 0.68 H,65 HEIGHT ,,85,85 RECOMMENDED PC LAYOUT K: 60 gf -0,5,5 +0,5, x05,,5,5 +0,0 (,) 0,65-0,05 () ) (, Restriction in operation 0 ± 0, ø 90 ± R G: 00 gf No Lines S: 600 gf Force symbol lines for 600 gf No symbol line for 00 gf TAPE & REEL 8, Max, ± 0,5,5,75 ±0,5 tape 9, Cover 5,5 ±0, ± 0,8 CARRIER TAPE 8 SEE DETAIL A REEL DETAIL A SCALE 0,5

145 PTS 50 Series Ultra Low Profile SMT Top Actuated Features/enefits.7 x.7 mm footprint 0.5 mm thickness High number of cycles Typical Applications MP accessories luetooth headset Remote controls Specifications FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: J type for SMT TRAVEL: 0.5 mm ± 0. mm Mechanical Operating Operating Life Part Number Force (gf) (operations) PTS50 JM05 SMTR LFS 60 ± ,000 PTS50 JK05 SMTR LFS 0 ± 50 00,000 Packaging Switches in reels of 0,000 pieces. Dimensions of reels according to EIA 8 External diameter 0 mm Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Environmental OPERATING TEMPERATURE: VDC 50 ma 50 VA C (mn) 00 mω 00 MΩ 0 ms -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 5 0 J 0 5 S M T R L F S Termination J J bend Packaging SMTR Tape & reel LFS RoHS, silver plated Actuation Force M 60 gf black casing K 0 gf gray casing ody Type mm height

146 PTS 50 Series Ultra Low Profile SMT Top Actuated PTS 50,7 ±0,,05 0,5 ±0,5, Tactile Switches,7 ±0,,5 ± 0,,5 ± 0, RECOMMENDED PC,5,7,, Ø 0,7 Recommended operating area by set knob,8 SCHEMATIC Cover tape (Polyester) Carrier tape (Polystyrene) 9, Cover tape (0,8) Reel (Polystyrene) n,5 +0, 0 5,5,75 ± 0, + 0 CARRIER TAPE 8 n 0 n,8 ± 0,5 ± 0,5 n,6 ±0,8 DETAIL A REEL DETAIL A SCALE 0,5

147 PTS 80 Series Microminiature SMT Top Actuated Features/enefits. x. mm footprint.5 mm thickness High number of cycles Color coded actuators Typical Applications Control panels Nomad devices Remote controls Keyless entry system Specifications FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: J type for SMT TRAVEL: 60 & 60 gf: 0.5mm ± 0.mm 00 & 600 gf: 0.0mm ± 0.mm Operating Operating Life Force (gf) (operations) PTS80 SJM 50 SMTR LFS 60 ± 50 50,000 PTS80 SJK 50 SMTR LFS 60 ± 70 50,000 PTS80 SJG 50 SMTR LFS 00 ± 00 00,000 PTS80 SJS 50 SMTR LFS 600 ± 50 50,000 Packaging Switches in reels of,900 pieces. Dimensions of reels according to EIA 8 External diameter 0 mm Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Environmental OPERATING TEMPERATURE: 6 VDC 50 ma 50 VA C (mn) 500 mω 00 MΩ 0 ms -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 0 S J 5 0 S M T R L F S Actuator Type S Standard Termination J J bend SMT Packaging SMTR Tape & reel LFS RoHS, silver plated Actuation Force M 60 gf; gray actuator K 60 gf; white actuator G 00 gf; blue actuator S 600 gf; gray actuator Height 50.5 mm height 5

148 PTS 80 Series Microminiature SMT Top Actuated PTS80 SCHEMATIC 0,5±0,,6, Tactile Switches,6±0,,,6,7,,8±0,, RECOMMENDED PC LAYOUT, 5,,5,8 TAPE & REEL tape 9, Cover,5 5,6,7 5 ±0, 8 8, Max, + 0 CARRIER TAPE 0 ± 0,5 ±0,5 ± 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5 6

149 PTS 80 Series Microminiature SMT Top Actuated Features/enefits.9 x.9 mm footprint Three different heights High number of cycles Reduced footprint Typical Applications Control panels Nomad devices Remote controls Keyless entry system Specifications FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: J type for SMT TRAVEL: 0.mm + 0.mm / mm Operating Life Height Pegs Force (gf) Cycles mm PTS80 J5M SMTR LFS 60 ± 50 00,000.5 No PTS80 J5K SMTR LFS 50 ± 50 00,000.5 No PTS80 J5MP SMTR LFS 60 ± 50 00,000.5 Yes PTS80 J5KP SMTR LFS 50 ± 50 00,000.5 Yes PTS80 J0M SMTR LFS 60 ± 50 00,000.0 No PTS80 J0K SMTR LFS 50 ± 50 00,000.0 No PTS80 J0MP SMTR LFS 60 ± 50 00,000.0 Yes PTS80 J0KP SMTR LFS 50 ± 50 00,000.0 Yes PTS80 J5M SMTR LFS 60 ± 50 00,000.5 No PTS80 J5K SMTR LFS 50 ± 50 00,000.5 No PTS80 J5MP SMTR LFS 60 ± 50 00,000.5 Yes PTS80 J5KP SMTR LFS 50 ± 50 00,000.5 Yes Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Environmental OPERATING TEMPERATURE: VDC 50 ma 00 VA C (mn) 00 mω 00 MΩ 0 ms -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches Packaging Switches in reels of,500 pieces for.5 and.0 mm height Switches in reels of,00 pieces for.5 mm height Dimensions of reels according to EIA 8 External diameter 0 mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 0 J S M T R L F S Actuator Type J J bend SMT Height 5.5 mm 0.0 mm 5.5 mm Actuation Force M 60 gf K 50 gf Pegs P with pegs Void no pegs Packaging SMTR Tape & reel LFS RoHS, silver plated 7

150 PTS 80 Series Microminiature SMT Top Actuated.5 &.0 mm height (H) - version shown here with pegs Ø (0,5) H Tactile Switches, ± 0,,9,9,8 Ø 0,6,5 x 0,8,8 SCHEMATIC,,,,,8 0,5 5, RECOMMENDED PC LAYOUT C o v e r 5 a p 7 e t,,,5 +0, 0 6 ± 7 5 0, 8 CARRIER TAPE, Max 6, ± 0,5 ±0,5 ± 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5 8

151 ,,, PTS 80 Series Microminiature SMT Top Actuated.5 mm height (H) - version shown here with pegs x 0,6 0,5 (0.5),5,9,9 ± 0, 8,,5 x 0,8 8, SCHEMATIC,, 5, 8 Tactile Switches RECOMMENDED PC LAYOUT C o v e r a p e t,,,5 +0, ± 7 5 0, 8 CARRIER TAPE, Max 6, ± 0,5 ±0,5 ± 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5 9

152 PTS 80 Series Microminiature SMT Top Actuated NEW Features/enefits.5 x.6 mm footprint High number of cycles Optional ground pin Typical Applications Wearable electronics Nomad devices Remote controls Keyless entry system Tactile Switches Specifications FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: G type for SMT TRAVEL: 0.5 mm + 0. mm Operating Life Ground Force (gf) Cycles Pin PTS80 GM0 SMTR LFS 60 ± ,000 No PTS80 GG0 SMTR LFS 50 ± 80 00,000 No PTS80 GM0G SMTR LFS 60 ± ,000 Yes PTS80 GG0G SMTR LFS 50 ± 80 00,000 Yes Packaging Switches in reels of 9,500 pieces Dimensions of reels according to EIA 8 External diameter 0 mm Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Environmental OPERATING TEMPERATURE: VDC 50 ma 00 VA C (mn) 00 mω 00 MΩ 0 ms -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 0 G 0 S M T R L F S Termination G Gullwing Actuation Force M 60 gf G 50 gf Packaging SMTR Tape & reel LFS RoHS, silver plated Height 0. mm height Grounding Option G Ground pin Void No ground pin 0

153 PTS80 GX 0 SMTR LFS NEW PTS 80 Series Microminiature SMT Top Actuated,5 0,5,05 0,,7 RECOMMENDED PC LAYOUT 0,9,,,6 0, SEE DETAIL,5,9, 0,, 0, 0,9 0, 0,05 0,0- DETAIL SCALE 8 SCHEMATIC Tactile Switches Cover tape (Polyester) Carrier tape (Polystyrene) Reel (Polystyrene) (,6),5 +0, 0 9, Cover tape 5,5,75 0, 8, Max, CARRIER TAPE 0,5 0,5 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5

154 PTS 80 Series Microminiature SMT Top Actuated PTS80 GX 0 G SMTR LFS NEW,5 0,5,05 0,,7 RECOMMENDED PC LAYOUT 5 6,,6 0, 5 6 0,7,, Tactile Switches, 0,, 0, 0,9 0, Detail C DETAIL C SCALE , 0,05,5,,8 SCHEMATIC 5 6 Cover tape (Polyester) Carrier tape (Polystyrene) Reel (Polystyrene) (,6),5 +0, 0 9, Cover tape 5,5,75 0, 8, Max, CARRIER TAPE 0,5 0,5 0,8 SEE DETAIL A REEL DETAIL A SCALE 0,5

155 Tactile Switches (inches)

156 PTS 80 Series Microminiature SMT Side Actuated Features/enefits.5 x.55 mm footprint Front PIP leads option for strong shear resistance ESD pin option Reduced footprint Typical Applications Nomad devices Remote controls Personal health diagnostics Consumer electronics Tactile Switches Specifications FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: G and front PIP types for SMT TRAVEL: 0.mm + 0.mm / -0. mm LIFE: 00,000 cycles Operating SMT Type Force (gf) Leads Pegs Without ground pin PTS80 GM SMTR LFS 60-0/+70 G leads No PTS80 GK SMTR LFS 0-70/+80 G leads No PTS80 PM SMTR LFS 60-0/+70 P leads No PTS80 PK SMTR LFS 0-70/+80 P leads No PTS80 GMP SMTR LFS 60-0/+70 G leads Yes PTS80 GKP SMTR LFS 0-70/+80 G leads Yes With ground pin PTS80 ESDGM SMTR LFS 60-0/+70 G leads No PTS80 ESDGK SMTR LFS 0-70/+80 G leads No PTS80 ESDPM SMTR LFS 60-0/+70 P leads No PTS80 ESDPK SMTR LFS 0-70/+80 P leads No PTS80 ESDGMP SMTR LFS 60-0/+70 G leads Yes PTS80 ESDGKP SMTR LFS 0-70/+80 G leads Yes Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: Environmental OPERATING TEMPERATURE: VDC 50 ma 50 VA C (mn) 500 mω 00 MΩ 0 ms -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of,500 pieces Dimensions of reels according to EIA 8 External diameter 0 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 0 S M T R L F S ESD Pin VOID No ESD Yes SMT Style G Gullwing P Front PIP Packaging SMTR Tape & reel LFS RoHS, silver plated Actuation Force M 60 gf K 0 gf Pegs* P with pegs Void no pegs * Peg option not valid for P SMT leads type Design Recommendations - P leads are recommended for applications where shear resistance is of importance - When a precise alignment between application button and the switch is requested, version with pegs are the right choice to limit the possible floating of the switch during solderability.

157 PTS 80 Series Microminiature SMT Side Actuated Standard G SMT Leads with ESD and Peg options 5 PC MOUNTING FACE,55,9,5±0, 0,65 0, 0-0,,7,5 0,5 5 0,6 0,5,5 0,5 This ground pin is for ESD function only and not solderable 0±0,05,8±0, Ground terminal can be effective even if not soldered,5±0, 0,±0, SCHEMATIC 5±0,,±0,,±0,,8±0,05,5±0,,95±0, +0, x 0,7-0, Tactile Switches,7 RECOMMENDED PC LAYOUT Scale 0 0,05 Max 0, Max P SMT Leads with ESD option SCHEMATIC 5 PC MOUNTING FACE,9±0,5 55,9,5 ±, 0, 0,,7,5 0,5 5 0,6 0,5 This ground pin is for ESD function only and not solderable 0±0,05 0,,5 Ground terminal can be effective even if not soldered 0, ±,5 0, ± 0, 5,5±0,,±0,, 5 0, ±,5 ± 0,,95±0,,7 0,5± 0,6 0,05 Max 0, Max Ø 0,65 +0, 0 Through hole metalized,05±0, 0,8 RECOMMENDED PC LAYOUT 5

158 PTS 80 Series Microminiature SMT Side Actuated TAPE & REEL 5 r,,,,5 7 t Tactile Switches, 9 a p e C o v e CARRIER TAPE ± 0 8, Max, ± 0,5 ±0,5 ± 0,8 VOIR DETAIL A REEL DETAIL A SCALE 0,5 6

159 KSR Series Subminiature Tact Switch for SMT Features/enefits actuation forces G terminations N.O. and N.C. Detect type available Rubber actuator IP50 sealed RoHS compliant and compatible Typical Applications Automotive Medical equipment Industrial electronics Smart meters Specification FUNCTION: momentary action CONTACT ARRANGEMENT: Normally Open TERMINALS: Gullwing type for SMT Mechanical Operating force Operating life Travel Type Newtons (grams) (operations) (mm) KSRG LFS / KSRG LFG,5 <,85 (85) <, 00,000 0,5 ± 0,5 KSRG LFS / KSRG LFG,9 <,5 (5) <,6 00,000 0, ± 0,5 KSRG LFS /KSRG LFG,5 <,00 (00)<,75 00,000 0,5 ± 0,5 KSR5G LFS / KSR5G LFG, <,50 (50) < 5,6 00,000 0,5 ± 0,5 KSRG NC LFS,5 <,5 (5) < 0,000 0, ± 0,5 KSRG NC LFG,5 < (00) <,5 0,000 0, ± 0,5 Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT DC: 50 ma 0 ma MINIMUM CURRENT DC: ma ma CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: (00 V): G Ω (between terminals) OUNCE TIME: ms max. Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Tactile Switches Overload: 0 Newtons Detect switch versions are available. Please see Detect chapter KSRD/M series. Packaging Switches are delivered on continuous tape, in reels of,500 pieces. Process SOLDERING: Compatible with lead free reflow soldering process. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S R G Actuator Soft actuator Operating Force.8 N (80 grams).0 N (00 grams).0 N (00 grams) 5.5 N (50 grams) Contact Material Silver Gold Switch Function (NONE) Normally open NC Normally closed* Termination G Gull wing LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. *Available on KSRG only. 7

160 KSR ø,9,5,75 KSR Series Subminiature Tact Switch for SMT 7, 6 Tactile Switches Recommended PC layout 6 8,,8 TAPE & REEL 0,5,8 5,5,75 8 ø,5 A 6,5 7,65, ø,5 A DIRECTION OF FEED 8

161 KSR Long Life-00,000 cycles-gold and Silver Series Subminiature Tact Switch for SMT Features/enefits actuation forces G terminations N.O. Detect type available Rubber actuator IP50 sealed RoHS compliant and compatible Typical Applications Automotive Medical equipment Industrial electronics Specification FUNCTION: momentary action CONTACT ARRANGEMENT: Normally Open TERMINALS: Gullwing type for SMT Mechanical Operating force(fa) Operating life Travel Type Newtons (grams) (operations) (mm) Silver versions KSRG LFS,5 <,85 (85) <, 00,000 0,5 ± 0,5 KSRG LFS,9 <,5 (5) <,6 00,000 0, ± 0,5 KSRG LFS,5 <,00 (00)<,75 00,000 0,5 ± 0,5 KSR5G LFS, <,50 (50) < 5,6 00,000 0,5 ± 0,5 Gold versions KSRG LFS,5 <,85 (85) <, 00,000 0,5 ± 0,5 KSRG LFS,9 <,5 (5) <,6 00,000 0, ± 0,5 KSRG LFS,5 <,00 (00)<,75 00,000 0,5 ± 0,5 KSR5G LFS, <,50 (50) < 5,6 00,000 0,5 ± 0,5 Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: V dc V dc MINIMUM VOLTAGE: 0 m Vdc 0 m Vdc MAXIMUM CURRENT DC: 50 ma 0 ma MINIMUM CURRENT DC: ma ma CONTACT RESISTANCE: 00 m Ω INSULATION RESISTANCE (00 V): G Ω (between terminals) OUNCE TIME: ms max Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process SOLDERING: Compatible with lead free reflow soldering process. Tactile Switches OVERLOAD: 0 Newtons Packaging Switches are delivered on continuous tape, in reels of,500 pieces. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S R G Actuator Soft actuator Operating Force.8 N (80 grams).0 N (00 grams).0 N (00 grams) 5.5 N (50 grams) Contact Material Silver Gold Termination G Gull wing LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. 9

162 KSR Long Life-00,000 cycles-gold and Silver Series Subminiature Tact Switch for SMT KSR ø,9,5,75 7, 6 Tactile Switches Recommended PC layout 6 8,,8 TERMINATION TAPE & REEL 0,5,8 5,5,75 8 ø,5 A 6,5 7,65, ø,5 A DIRECTION OF FEED 0

163 Features/enefits Low profile of.7 mm Excellent tactile feel High shear force Range of actuation forces Large flat top RoHS compliant and compatible KSS Series Subminiature SMT Side Actuated Typical Applications Cellular phone Industrial electronics Health diagnostic electronics Specification FUNCTION: momentary action CONTACT ARRANGEMENT: N.O. TERMINALS: Gullwing IP0 sealed Mechanical OVERLOAD: 0N TACTILE FEELING: and N: 5% min..5n: 0% min. Operating force Operating life Travel Type Newtons (grams) (operations) (mm) KSSG.0 (00) ± ,000 0, ± 0,5 KSSG.5 (50) ± ,000 0, ± 0,0 KSSG.0 (00) ±.0 00,000 0, ± 0,5 Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma ma DIELECTRIC STRENGTH: 50 VDC CONTACT RESISTANCE: < 00 mω INSULATION RESISTANCE (00 VDC): 0 9 Ω OUNCE TIME: < ms Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process Infared reflow soldering in accordance with IEC Tactile Switches NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Packaging Tape and reels in reels of,000 pieces. External diameter 0mm ± mm. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S S G Actuator Standard,, (0.0) Large,,8 (0.070) Operating Force.0 N (00 grams).5 N (50 grams).0 N (00 grams) Termination G Gull wing, SPST LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. Contact Material Silver Gold

164 KSS Series Subminiature SMT Side Actuated KSS,,5, == ==,7 Tactile Switches,7 7 5,5 7,6,,5 0,8,7 (x) ACTUATOR STANDARD,, (0.0) LARGE,,8 (0.070),,,,8 TAPE & REEL,75 ± 0, ± 0, 8 ± 0, +0, ø,5 0 ± 0, ± 0, 5,5 ± 0, A A ± 0, 7, ± 0, 5 ± 0,,9 ± 0, DIRECTION OF FEED +0, ø,5 0

165 KSC Series Sealed Tact Switch for SMT Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: J bend & Gullwing type for SMT SEALING: IP67 except KSC5 (IP50) Liability Limitation This datasheet does not provide enough information for applications that require a certain level of quality or safety such as automotive, medical systems, or safety equipement. Please contact customer service for the contractual specification package. Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma* 0. ma DIELECTRIC STRENGTH (50 Hz, min.): 50 Vrms CONTACT RESISTANCE: 00mΩ INSULATION RESISTANCE (00 V): 0M Ω OUNCE TIME: ms * Ultra low current with 0 µa - VDC version are available upon request for KSC and KSC Tactile Switches Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process SOLDERING: Depending on the application, this component is suited to the following methods: Terminals being silver or gold plated over a nickel barrier, the use of slightly activated flux is suitable. Soldering on double wave machine for vertical versions: soldering time 5 sec. Cleaning according to typical washing processes. Infrared Reflow Soldering in accordance with IEC Packaging Tape and Reel (see series for quantity information) NOTE: Specifications listed above are for switches with standard options. KSC Product Range KSC KSC KSC KSC KSC5 KSC6 KSC7 KSC8 KSC9 KSC0 Without actuator Soft actuator Hard actuator Soft actuator Hard actuator Hard actuator Soft actuator Hard actuator H =.5 mm H =.5 mm H =.5 mm H = 5. mm H = 5.6 mm H = 7.7 mm H =. mm H =.9 mm Hard actuator H = 7.7 mm compatible with button Soft actuator H =.9 mm IP67 IP67 IP67 IP67 IP50 IP67 IP67 IP67 IP67 IP67 Note: KSC Series is subject to variants. Please contact customer service for other options.

166 KSC Series Sealed Tact Switch for SMT J J END,9 max G GULLWING,9 max +0, 0, 0, mini 6,8 +0, 0, 0 ( 7,6 ) 0 Tactile Switches PAD LAYOUT maxi 8,6 mini 0,7±0,05 PAD LAYOUT 5,8 maxi mini 0,7±0,05 MM 0 m m 6 MM 0 6 m m mm Pieces 6 mm Pieces KSCJ,000 KSCG,000 KSCJ,000 KSCG,000 KSCJ,000 KSCG,000 KSCJ & G,000 KSC5J & G,000 KSC6J & G 750 KSC7J & G,000 KSC8J & G,000 KSC9J & G 750 KSC0J & G,000

167 KSC Series Sealed Tact Switch for SMT KSC without actuator,5 mm high max smooth surface Operating Operating Type force FA life Travel (Newtons) (operations) (mm) KSC.8 ± , ± 0.5 KSC ± , ± 0.5 KSC5 5.5 ±. 00, ± 0.5 Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm +0, 0, 0 +0, 6, 0 R0, ø +0, 6, 0,5 min,9 max Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C Operating Force.8 N * (80 grams) N * (00 grams) N (550 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated * See mechanical chart above to confirm specifications Contact Material Silver Gold Termination J J bend G Gullwing 5

168 KSC Series Sealed Tact Switch for SMT KSC soft actuator,5 mm high ø,9 Tactile Switches Operating Operating Type force FA life Travel (Newtons) (operations) (mm) KSC0.6 ± 0.6 5,000, ± 0. KSC ± , /- 0. KSC ± 0.5,000, ± 0.5 KSC.5 ± , ± 0. KSC ±.5 00, ± 0. KSC SPD.5 ± , ± 0. KSC SPD.55 ± , ± 0. KSC5 SPD 6. ±.55 00, ± 0. Packaging,9 max +0, 0, 0 +0, 6, 0 +0, 6, 0,5 Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C Operating Force 0.6 N (60 grams) N (00 grams).5 N (50 grams) N (550 grams) See mechanical chart above to confirm specifications NONE Standard version SPD Special delta version LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated Contact Material Silver Silver long life Gold Gold long life Termination J J bend G Gullwing 6

169 KSC Series Sealed Tact Switch for SMT KSC hard actuator,5 mm high ø,8 Operating Operating Type force FA life Travel (Newtons) (operations) (mm),9 max,7 KSC ± 0. 00, /- 0 KSC ± , /- 0 KSC5 5 ± 00, /- 0 Packaging +0, 0, 0 +0, 6, 0 +0, 6, 0 Tactile Switches Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C Operating Force N (00 grams) N (00 grams) 5 5 N (500 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated See mechanical chart above to confirm specifications Contact Material Silver Gold Termination J J bend G Gullwing 7

170 KSC Series Sealed Tact Switch for SMT KSC soft actuator 5, mm high ø,7 Tactile Switches Operating Operating Type force FA life Travel (Newtons) (operations) (mm) KSC0 50SH.5 ± ,000, ± 0.5 KSC 70SH. ± 0.5,000, ± 0.0 KSC 70SH.7 ± , ± 0.5 KSC 70SH.7 ± 0.5,000, ± 0.5 KSC 70SH ± 00, ± 0.5 KSC 70SH ±,000, ± 0.5 KSC5 70SH.5 ± , ± 0. KSC SPD.5 ± , ± 0. KSC ST. ± 00, ± 0.5 KSC ST. ± 00, ± 0.0 KSC6 ST 6.5 ±.75 00,000 ± 0. KSC6 ST 6.5 ±.75 00, ± 0.,9 max +0, 0, 0 +0, 6, 0 +0, 6, 0 5, Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C Operating Force 0.5 N (5 grams).n (0 grams).7 N (70 grams) N (00 grams) 5.5 N (5 grams) N (65 grams) See mechanical chart above to confirm specifications Contact Material Silver Silver long life Gold Gold long life Termination J J bend G Gullwing 50SH 50 shore ** 70SH 70 shore *** SPD Special delta version ST High click ST Low click LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated ** applies to KSC0J50SH only *** applies to KSCJ70SH, KSCJ70SH and KSCJ70SH 8

171 KSC5 Series Tact Switch with Rocker Option for SMT KSC5 hard actuator 5,6 mm high Operating force Operating force Travel to Travel to axial FA lateral FL make make Life expectancy Life expectancy Type N (grams) N (grams) ±0% axial (mm) lateral (mm) cycles, axial cycles, lateral KSC5 ± ± ± ,000 0,000 KSC5 ± ± ± ,000 0,000 Packaging Switches delivered on continuous tape & reels of,000 pieces, dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm,9 max, ø,7 ø,, mini 6,8 6,+0, 0 5,6 0,7±0,05 +0, 0, 0 Tactile Switches +0, 6, 0 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 5 R O H S Operating Force N (00 grams) N (00 grams) Contact Material Silver Gold Termination J J bend G Gullwing RoHS compliant, non compatible 9

172 KSC6 Series Sealed Tact Switch for SMT KSC6 hard actuator 7,7 mm high Operating Operating Type force FA life Travel (Newtons) (operations) (mm) ø,7 ø,9 Tactile Switches KSC6.7 ± , ± 0. KSC6.55 ± , ± 0. KSC6. ± , ± 0. Packaging Switches delivered on continuous tape & reels of 750 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm,6,9 max +0, 0, 0 +0, 6, 0 +0, 6, 0 7,7 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 6 Operating Force.7 N (70 grams).55 N (55 grams). N (0 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated See mechanical chart above to confirm specifications Contact Material Silver Gold Termination J J bend G Gullwing 50

173 KSC7 Series Tact Switch with Rocker Option for SMT KSC7 soft actuator, mm high ø Operating Operating Type force FA life Travel (Newtons) (operations) (mm),9 max, KSC70.6 ± 0.6 5,000, ± 0. KSC7.5 ± , ± 0.5 KSC7.9 ± 00, ± 0. Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm +0, 0, 0 +0, 6, 0 +0, 6, 0 Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 7 Operating Force 0.6 N (60 grams).5 N (5 grams).9 N (90 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated See mechanical chart above to confirm specifications Contact Material Silver Gold Termination J J bend G Gullwing 5

174 KSC8 Series Sealed Tact Switch for SMT KSC8 hard actuator,9 mm high Tactile Switches Operating Operating Type force FA life Travel (Newtons) (operations) (mm) KSC8.5 ± , ± 0. KSC8 OL.7 ± , ± 0. KSC8 OL.55 ± , ± 0. KSC8 OL. ± , ± 0. Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm,5,9 max +0, 0, 0 +0, 6, 0 ø,7 ø,96 +0, 6, 0,9 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 8 Operating Force.7 /.5 N (70/5 grams).55 N (55 grams). N (0 grams) See mechanical chart above to confirm specifications Contact Material Silver Gold Option NONE Long travel OL Short travel Termination J J bend G Gullwing LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated 5

175 KSC9 Series Sealed Tact Switches for SMT KSC9 hard actuator 7,7 mm high ø,7±0, ø,95±0,0 Operating Operating Type force FA life Travel (Newtons) (operations) (mm) KSC9.7 ± , ± 0. KSC9.5 ± , ± 0. KSC9. ± , ± 0. Packaging Switches delivered on continuous tape & reels of 750 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm,6±0,,9 max +0, 0,0 +0, 6, 0 ±0, * 0,, min +0, * 6, 0 +0, 6,8-0,,05±0,05 7.7±0. 0,7±0,05 Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. K S C 9 Operating Force.7 N (70 grams).55 N (55 grams). N (0 grams) Contact Material Silver Gold Termination J J bend G Gullwing LFS Lead free compatible, silver plated. LFG Lead free compatible, gold plated. T N K S C 9 Type NONE 5.mm height mounted Color 0 Light grey 0 Red 80 White 90 lack ø 6,5 ø 6 R 0,5 0,±0, 5,±0, SWITCH WITH CAP 5

176 KSC0 Series Sealed Tact Switches for SMT KSC0 soft actuator,9 mm high Ø,7 ± 0, Tactile Switches Operating Operating Type force FA life Travel (Newtons) (operations) (mm) KSC00.5 ± ,000, ± 0.5 Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EIA RS-8/ IEC standard External diameter 0 ± mm,9 max 6, +0, * 0 ± 0, 0, +0, 0 0, 0 *, mini +0, 6, 0 6,8 +0, -0,,9 ± 0, 0,7 ± 0,05 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 0 0 L F S Operating Force 0.5 N (5 grams) LFS Lead free compatible, silver plated See mechanical chart above to confirm specifications Contact Material Silver Termination J J bend G Gullwing Note: KSC0 offered with yellow actuator as standard, hardness 55 Shore 5

177 KSCV Series Side Actuated Sealed Tact Switch Features/enefits Full SMD side actuated Haptic adaptability Pin in paste terminations Tape & reel IP67 Typical Applications Automotive Industrial electronics Network equipment Telecommunications Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: pin in paste signal terminals SMD ground terminals Mechanical Type Force Operating Life Travel (N) (operations) (mm) KSCVSPDLFS.5 ±.0 00, ± 0. KSCV70SHLFS.55 ± , ± 0. NOTE: asic version is based on KSCV SPDELTA LFS. Other configurations of haptics are available upon demand. MISUSE OVERLOAD: 0N with back support SHEAR FORCE:0N without back support Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma 0. ma DIELECTRIC STRENGTH (50 Hz, min.): 50 Vrms CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE (00 V, initial stage): > 0 9 Ω OUNCE TIME: < ms Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process SOLDERING: Depending on the application, this component is suited to the following methods: Cleaning according to typical washing processes. Infrared Reflow Soldering in accordance with IEC TERMINALS: pin in paste, silver or gold plated TOP PLATE: tin plated MSL level: Vacuum pick head mandatory Packaging In reels of 500 pieces. Dimensions of reels according to EIA RS8 or IEC 86. External diameter 0 mm ± mm. NOTE: This product is designed and manufactured for general electronic devices. For systems where reliability and safety are required, please contact your sales representative to secure product integration and function to secure usage. Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. K S C V L F S Actuator short, soft* long, soft Operating Force*** N (00 grams).5 N (50 grams) Contact Material Silver Gold LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated Actuator / Tactile 70SH Silicon 70SH**** SP DELTA Silicon 70SH improved tactile**** RT Hard rubber RT Long travel hard rubber * KSC version available upon demand *** Force available upon demand (variant version) **** Available for KSC only 55

178 KSCV Series Side Actuated Sealed Tact Switch +0, 6, * 0 0,75±0,05 5,6±0,5 Tactile Switches 0,8, ±0, 7,5, 6,5 6,7 0,5±0,05 90 ± Switch standing plan reference P &P area ( ø,9 max ),±0,5 90 ±,,9±0, ø,7±0, 0, METALIZED HOLES ø,±0,05 ø 0, A,5,9±0,,5 GROUND 6,6 PC LAYOUT PIN IN PASTE TOP VIEW ON TWO PC SIDES ø,6±0, ø 0, A 0,8,5 TAPE AND REEL C SECTION C-C +0, 6-0, 7,5±0,,75±0, 5 A A C,85,7, 5,5 7 5,±0, ±0, ±0, +0, ±0, Ø,5 0 7,7,8 7,±0, 9,±0, +0, Ø,5 0,5 SECTION A-A INTEGRATION 56

179 KSE Series Low Profile Tact Switch Features/enefits Low profile Cost efficient J or G terminations Tape and reel IP67 Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: J bend & Gullwing type for SMT Mechanical Operating Type Force FA Operating Travel (Newtons) Life (mm) Min. Max. Operations KSEMJLFS,6 ± 0,6 00,000 0, + 0,/-0, KSEMGLFS,6 ± 0,6 00,000 0, + 0,/-0, KSEKJLFS,5 ± 0,75 00,000 0, ± 0, KSEKGLFS,5 ± 0,75 00,000 0, ± 0, NOTE: For cost effectiveness the tactile feeling is not specified and can change along production. If your application requires a defined tactile effect, please consider KSC series for your application. Typical Applications Smart meters Home appliances Consumer electronics Industrial electronics Telecommunications Electrical MAXIMUM POWER: VA MINIMUM/MAXIMUM VOLTAGE: 0 mv / VDC MINIMUM/MAXIMUM CURRENT: ma /50 ma DIELECTRIC STRENGTH: (50 Hz, min.): 50 V CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: (00 V): 0 9 Ω OUNCE TIME: ms Environmental OPERATING TEMPERATURE: -0 C to 85 C STORAGE TEMPERATURE: -55 C to 85 C Process SOLDERING: Depending on the application, this component is suited to the following methods: Cleaning according to typical washing processes. Infrared Reflow Soldering in accordance with IEC Tactile Switches Packaging In reels of,000 pieces Dimensions of reels according to EIA RS8 or IEC 86. External diameter 0 mm ± mm. NOTE: Specifications listed above are for switches with standard options. KSE series is not subject to adaptation and/or modification for specific use. If you require additional features, please refer to the KSC series. KSE is not recommended for applications requiring high level of performance such as aerospace, automotive and some industrial applications. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. K S E Operating Force M.5N for.mm height K.5N for.mm height Height.mm.mm Termination J J bend G Gullwing LFS Lead free compatible, silver plated. 57

180 KSE Series Low Profile Tact Switch HEIGHT. MM HEIGHT. MM HEIGHT +0, ø,9-0, ø +0, 0, 0 +0, 0, 0 Tactile Switches,9 max +0, 0, 0 0, 5 +0, ø,9-0, 5 +0, ( 0,5 ) 7,6-0,,±0, PAD LAYOUT 5,8 maxi 0±0, 6,+0, * 0 +0, ø,9-0, +0, 0, 0 +0, 6, 0 +0, 6,5 0 ±0, 0,7±0,05,9 max,±0, 0, PAD LAYOUT maxi * +0, 6,5 0 ±0, 0,7±0,05,9 max,±0,,9 max, 0, TERMINATION G GULLWING mini J J END 8,6 mini +0, 6,8-0, 58 )

181 KSE Series Low Profile Tact Switch TAPE & REEL mm height ø,5+0,/-0,0 ( /-.000) ø,5+0,/-0,0 ( /-.000),00,05 ( ) 8,0 (.5),0±0,05 (.079±.00),75 (.069) 0' max. 0,5±0,05 (.00±.00) 6 mm height,00, (.7.0) 7,+0,/-0,0 ( /-.000),5+0,/-0,0 (.+.008/-.000) 6,6+0,/-0,0 ( /-.000) 5,5 (.7) Tactile Switches 59

182 KT Series Full SMT Top & Side Actuated Sealed Tact Switch Features/enefits Full SMT side-actuated tact switch SMT top-actuated tact switch with G or J terminations High shear force with extended bracket Easy to pick & place with top plate tab Rubber or hard plastic actuator Press fit or snap fit caps RoHS compliant and compatible Typical Applications Telecommunications Computer products Instrumentation Power supply Tactile Switches Specification CONTACT ARRANGEMENT: SPST, N.O. TERMINALS: SMT termination Electrical CONTACT RATING:.0 VA V AC or DC max. ELECTRICAL & MECHANICAL LIFE: 00,000 make-and-break cycles at full load. DIELECTRIC STRENGTH: 50 Vrms sea level. CONTACT RESISTANCE: elow 50 mω typ. - V DC, 00 ma. INSULATION RESISTANCE: 0 9 Ω min. Environmental OPERATING TEMPERATURES: Ag version: -0 C to 90 C Au version: -0 C to 5 C Process SOLDERAILITY: Per MIL-STD-0F method 08D, or EIA RS-86E method 9 ( hour steam aging). DEGREE OF PROTECTION: IP57; protection against harmful dust deposits, full-scale voltage protection. Packaging Switches supplied in anti-static tape and reels per EIA 8-. Tape and cover strip are conductive for use near statically sensitive components. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. SWITCH K T Actuator 0* Soft, flush * Soft, 0,6 mm * Soft,, mm P** Hard,,6 mm P** Hard,, mm P** Hard,,96 mm S*** ø0, for Press Fit Caps S*** ø0, for Snap Fit Caps (with anti-rotation) Orientation and Mounting Style SM Top Gullwing JM Top J end **** SAM Right angle SAM Right angle with front solder pad SAM Right angle with front solder pad and pick & place tab SAM Right angle with pick & place tab Contact Plating Silver 5 Gold Contact Plating LFS RoHS compliant and compatible. Silver plated LFG RoHS compliant and compatible. Gold plated * 0, & available with A, A & A mounting bracket only. ** P, P, P actuators suitable with A & A mounting bracket only. *** S & S available with A & A mounting bracket only. **** JM available with O,,, P, P, P without mounting bracket. UTTON To order buttons in bulk T N K T utton Style 0 Press fit 0 Snap fit, high temperature utton Color 90 lack 80 Ivory (natural) 0 Red 60 (inches)

183 KT Series Full SMT Top & Side Actuated Sealed Tact Switch SERIES KT,8 (.7) 6,60 MAX. (.60) ø,8 (.50), (.6) ACTUATOR 0 SOFT, FLUSH* SOFT, 0,6 mm* SOFT,, mm*,8 (.7) 0,6 (.05) 0,86 (.0) 7,57 (.98),8 (.5) 0,76 TYP. (.00),00 (.57), (.088) Tactile Switches, (.6) Ø,8 (Ø.5) ø,8 (ø.5) P HARD,,6 mm P HARD,, mm P HARD,,96 mm**,6 (.09), (.0),96 (.56) ø,55 (.0) ø,55 (.0) ø,55 (.0) S Ø0, FOR PRESS FIT CAPS*** S Ø0, FOR SNAP FIT CAPS*** 6,5 (.) ø5,08 (.00) ø5,7 (.5),8 (.5),90 (.9),8 (.5),9 SR (.69),98 (.96) * 0, & available with A, A & A mounting bracket only. ** P, P, P actuators suitable with A & A mounting bracket only. *** S & S available with A & A mounting bracket only. **** JM available with O,,, P, P, P without mounting bracket. 6 (inches)

184 6.6 MAX. 6.6 MAX. KT Series Full SMT Top & Side Actuated Sealed Tact Switch ORIENTATION & MOUNTING STYLE SM TOP GULLWING JM TOP J END Tactile Switches.,0 6. ± ± 0, ~ ~.8 0,7 c 0, 6. ± 0. Ø.56 ± TYP SUGGESTED PAD LAYOUT SCALE: 7: SCHEMATIC 6. ±0..6± 0.5 7, ± 0..,0 0,8 `, ± 0. Ø.56 ± ,77 TYP. 0, SCHEMATIC 5.59 SUGGESTED PAD LAYOUT SCALE: 8: SAM RIGHT ANGLE SAM RIGHT ANGLE WITH FRONT SOLDER PAD,7 (.067),7 (.067),57 (.80),0 (.080),90 (.) ø,8 (.50) SWITCH FACE, (.0) 0,8 (.05),8 (.7),90 (.) 6,0 (.8) ø,56 (ø.0),8 (.7), (.6) 6,60 MAX. (.60) 0,86 (.0) 7,57 (.98),8 (.5) 0,76 TYP. (.00),00 (.57) 6,60 MAX (.60), (.6),8 (.5) 0,86 TYP. (.0) 0,76 (.00),0 (.57) 7,77 (.06) 6 (inches)

185 KT Series Full SMT Top & Side Actuated Sealed Tact Switch SAM RIGHT ANGLE WITH FRONT SOLDER PAD AND PICK & PLACE TA SAM RIGHT ANGLE WITH PICK & PLACE TA,7 (.067),57 (.80),0 (.080),7 (.067) SWITCH FACE,86 (.5) 0,8 (.05) 7, (.80).7 (,8).50 (,8), (.6),8 (.5),90 (.) 6,9 (.8) 0,86 TYP. (.0),0 (.57) 7,77 (.06) 5,08 (.00) 0,76 (.00) ø,56 (ø.0) SWITCH FACE 7, (.80),7 (.7) 0,8 (.05),8 (.50),6 (.8),8 (.5),90 (.) 0,86 TYP. (.0) 6,9 (.8),0 (.57) 7,77 (.06) 5,08 (.00) 0,76 (.00) ø,56 (ø.0) Tactile Switches PAD LAYOUT SAM & SAM MOUNTING RACKET PAD LAYOUT SAM & SAM MOUNTING RACKET.0 (,79).067 (,70) SWITCH FACE.05 (0,8).00 (,5).95 (,95).0 (5,8).067 (,70) SWITCH FACE.8 TYP. (,76).5 (8,76).0 (5,).00 (0,76).8 (,76).65 (,9).5 (8,76).0 (5,8).00 (,5).00 (0,76).95 (,95).65 TYP. (,9) SCHEMATIC 6 (inches)

186 KT Series Full SMT Top & Side Actuated Sealed Tact Switch UTTON To order buttons in bulk UTTON 0 PRESS FIT 0 SNAP FIT, HIGH TEMPERATURE Tactile Switches PART Internal utton NUMER Part Number Color TN KT Ivory (Natural) TN KT lack TN KT Red Materials: Nylon Finish: Gloss,5 (.00) ø5,08 (.00),9 (.55) PART Internal utton NUMER Part Number Color TN KT Ivory (Natural) TN KT lack Materials: Nylon Finish: Gloss 6 (inches)

187 K5AT Illuminated SMT Tact Switch Features High bright LED s Gold plated dome contact offering superior contact reliability in time Excellent ergonomics: sharp tactile feel and audible click Reduced space usage on board in 0 N overload Tape and reel RoHS compliant and compatible Specification FUNCTION: momentary action CONTACT ARRANGEMENT: Normally Open TERMINALS: SMT with positioning pegs; SMT without positioning pegs is available, contact Customer Service Mechanical Operating force Operating Travel (total FA Newtons life travel) Type (grams) (operations) mm(mm) K5AT WH GP.0 (00) 00,000 0,5 (0.8) Tolerances of operating force FA is ± 5%. Typical Applications Application requiring illumination Server, storage Network infrastructure Telecom Medical Electrical POWER MIN/MAX: 0.0VA /.0VA VOLTAGE MIN/MAX: 0mVdc Vdc CURRENT MIN/MAX: 0.mA 00mA CONTACT RESISTANCE: <00m Ω INSULATION RESISTANCE: >G Ω initial, >0M Ω after damp heat OUNCE TIME: <0ms Environmental OPERATING TEMPERATURE: -0 C to 5 C STORAGE TEMPERATURE: -55 C to 5 C RELATIVE HUMIDITY: 90 to 96% according to NF EN PROTECTION: dust protection and flux tight (IP 0) OVERLOAD: 0N min Tactile Switches Packaging Standard: 900 pcs per reel; Reel diameter 80 mm Reduced: 80 pcs per reel; Reel diameter 80 mm Process SOLDERING: Compatible with the lead free soldering profile. No washing Materials CONTACTS: Au over Ni SOLDERING: Au over Ni HOUSING: Thermoplastic UL9 V0 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. K 5 A T W H G LED color YE (Yellow) GN (Green) RD (Red) U (lue) WH (White) GA (Green apple) Operating Force.0 N (00 grams) Termination G Gulf wing Peg NONE (STD.) P (with pegs) Contact Material Gold (Au) Packaging NONE (900 pieces per reel) R (reduced packaging 80 pieces per reel) 65

188 K5AT Illuminated SMT Tact Switch K5AT ELECTRICAL GRAPH,6,8,8,6,6,6 Hole Ø 0,95 8, 0,8 8, 8 5 Tactile Switches, 0,8 Ø6,56, Ø 0,8 Ø, PC LAYOUT TOP VIEW,85 0, Force Plating LED Shift 5, 8, A60 Hole Ø,5 Day of year Year 6, 0,,75 Ø,5 8,5 6,65 ± 0,, 8,5,,5 5,6 SECTION - Ø80 8,8 Ø50 66

189 K8 Lighted SMT Tact Switch with Rugged LED Mounting Process Features LED assembly without soldering Various LED options No light perturbation Sound haptic Various climatic classes Typical Applications Automotive Network equipment Telecommunications Medical equipment Industrial controls Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make control = SPST, N.O. TERMINALS: Gullwing type for SMT, peg as option, terminals for LED Mechanical Actuation Operating Total Force Life Travel Type (N) (operations) (mm) K8xxG LFS.0 00, ±0.5 Tolerances on actuation force is ± 0.5%. SEALING LEVEL: IP0 Illumination Colors White, blue, pure green, orange, super red LED technical information available on product specification. For any extra color, please contact your sales representative. Packaging In reels of 900 pieces under sealed foil. Dimensions of reels according to EIA RS8 or IEC 86. External diameter 80 mm. Electrical Silver Gold MAXIMUM POWER:.0 VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma 0. ma DIELECTRIC STRENGTH: (50 Hz, min.) 50 Vrms CONTACT RESISTANCE: < 00mΩ INSULATION RESISTANCE: (00 V, inital stage) > 0 9 Ω OUNCE TIME: < 0 ms Environmental OPERATING TEMPERATURE: STORAGE TEMPERATURE: Process -0 C to +85 C (Silver) -0 C to +5 C (Gold) -55 C to +85 C (Silver) -0 C to +5 C (Gold) SOLDERING: Compatible with the lead free soldering profile. No washing MSL level: 5 NOTE: The specifications show in the datasheet are for reference only and are not valid for design-in work. Please contact your sales representative to request drawings and product specifications. For systems where reliability and safety are required, please contact your sales representative to secure product integration and function to secure usage. Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. K 8 G LED color PG Pure Green SR Super Red OG Orange U lue WH White Operating Force.0 N Termination G Gulf wing Contact Material Silver Gold as option LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. 67

190 K8 Lighted SMT Tact Switch with Rugged LED Mounting Process PART NUMER REF LED EMITTED COLOR LUMINOUS INTENSITY (mcd) If = 0 ma CHROMATICITY COORDINATES OR PEAK WAVE LENGTH (typ) If = 0 ma FORWARD VOLTAGE V If = 0 MA min typ X Y min max K8WHG LW T67C-SU-5K8L WHITE 560 0, 0, K8UG L T67C-PR-5 LUE nm.. Tactile Switches K8PGG LP T676-LM-5 PURE GREEN nm.8. K8SRG LP T676-QR- SUPER RED nm.8. K8OGG LO T676-RS- ORANGE nm.85.5 ELECTRICAL GRAPH,8,8 0,8 5 0,8 6,56 8,,8,8 8,85 0,±0,05 6± 0, 5 PC LAYOUT TOP VIEW Year 0, 8, Day of year,,5 5 pick and place area : top of LED.5 max 5 68

191 K8 Lighted SMT Tact Switch with Rugged LED Mounting Process TAPE & REEL 80/5" ø d ir e c tio n o f u n r e e lin g Round sproket holes Tactile Switches 69

192 K5V Illuminated Tact Switch Tactile Switches Features Gold plated dome contact SPST/SPDT Excellent ergonomics High bright leds Reduced space usage on board 0 N overload Tape and reel RoHS compliant and compatible Specification FUNCTION: momentary action CONTACT ARRANGEMENT: Normally Open + Normally Closed TERMINALS: THT: Through hole terminals with positioning pegs SMT: Surface mount terminals with positioning pegs PM: Panel mount solder terminals with wire hole Mechanical Operating force Operating Travel (total FA Newtons life travel) Version (grams) (operations) mm(mm) THT, SMT, PM.0 (00) 5,000. (.) Tolerances of operating force FA is ± 5%. Packaging THT: 60 pieces per tray; 800 pieces per box SMT: 0 pieces per reel (reel ø 60mm); 0 pieces per box PM: 60 pieces per tray; 00 pieces per box Typical Applications When backlighting and switch are required to be a in component The dome contact secures a superior contact reliability in time The ergonomics of K5V provides a long travel, a sharp tactile feel and an audible click Server, storage, automotive, network infrastructure, medical Electrical POWER MIN/MAX: 0.0VA /.0VA VOLTAGE MIN/MAX: 0mVdc Vdc CURRENT MIN/MAX: 0.mA 00mA CONTACT RESISTANCE: <50m Ω INSULATION RESISTANCE: >G Ω initial, >0M Ω after damp heat OUNCE TIME: <5ms Environmental OPERATING TEMPERATURE: -0 C to 85 C STORAGE TEMPERATURE: -50 C to 85 C RELATIVE HUMIDITY: 90 to 96% according to NF EN PROTECTION: dust protection and flux tight OVERLOAD: 0N min Process SMT Soldering: Compatible with the lead free soldering profile No washing THT Soldering: Compatible with the lead free soldering profile No washing PM Soldering: Low wattage soldering iron (5-50 watts max). Solder time seconds max. No washing Materials LEAD FREE CONTACTS: Au over Ni SOLDERING: Au over Ni HOUSING: Thermoplastic UL9 V0 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. K 5 V Actuator without snap-in, clear (THT and PM version only) with snap-ins, clear for light pipe extension (THT and PM version only) without snap-in, light grey (SMT version only) 5 with snap-ins, light grey for light pipe extension (SMT version only) Actuator color/led color A Translucid/lue-Amber GN Translucid/Green U Translucid/lue Operating Force RD Translucid/Red.0 N (00 grams) RG Translucid/Red-Green WH Translucid/White WL Translucid/White (low luminosity) YE Translucid/Yellow YG Translucid/Yellow-Green CL Transparent/No LED 90 lack Actuator/No LED Termination G Surface mount P Panel mount T Through-hole.5mm S Through-hole.mm Contact Material Gold (Au) Option NONE No option P Terminal is cut P Terminal is cut P Terminal & is cut P Terminal & is cut 70

193 K5V Illuminated Tact Switch K5V SMT ELECTRICAL DIAGRAM RECOMMENDED PC LAYOUT ( WITH HOLES ) ø 5 (ø.97) x ø,,5,9,5 (.079x.07) (.059) (.5) (.059) 0, 5, (.06) (.) 8,,7 (.57) (.) (.85) Shift LED,9,9 (.075) (.075) 7 (.76) Day of year Single Color LED A i-color LED YG Y i-color LED RG R C AG/CY G CG/AY AG/CR G CG/AR Areas important for switch stability on PC,5 (.8) (.079) (.079) ø,5 ±0,05 (ø.05 ±.00), (.07) TOP VIEW 5,8 (.8),9,9 (.075) (.075) A C, (.07),05 (.59) 0,85 (.0), (.65) 0,85 (.0) Tactile Switches ø 6,6 ø 6,88 (ø.60) (ø.70) Plating A 8 8 Year Force 5 8 9,5 (.7) (.5) (.96),6 (.06) 9, (.58) 0, -0, 0 ( ) 6x 0, (.0x.9) (.9), (.055) 7 (.76) TAPE & REEL Direction of feed (inches) 7

194 K5V Illuminated Tact Switch K5V THT x ø, (.078x ø.07) ELECTRICAL DIAGRAM A ø 5 (ø.97) C Tactile Switches ø 6,88 (ø.70) A, (.70) 0, (.008) ø,5±0,05 (ø.05 ±.00) C 8 Plating Force 0, (.005), (.6),5 9, (.8) (.58) 6x 0,5 (.6 x.0) ø6,6 (ø.60) 8 8 Day of year 5 (.97),6 9,5 (.06) (.7) Year i-color LED YG AG/CY G Y CG/AY i-color LED RG AG/CR G R CG/AR RECOMMENDED PC LAYOUT ( WITH HOLES ) TOP VIEW,5,5 (.085) ø 0,8 (.085) ø,8 (ø.0) A (ø.07) (.5) 0,6 (.0) 7 (.80) COUPE - ø 6,6 (.60) (.866) A COUPE A-A,75 (.580) Sens de thermoformage 8,75 (.) DETAIL Q 8,5 (.) 5 (.96) 6 (.0),5 (.86) 6 ± (5.78 ±.09),5,5 (.085) (.085) 7 (.76) 0, 5, (.06) (.) 8,,7 (.57) (.0) (.86) Shift Year LED TRAY 0,65 (.9),5 (.098) DETAIL Q 90± (.7±.09) A 0,5 (.),5 (.56) 7 (inches)

195 9 (.5) K5V Illuminated Tact Switch K5V PM ELECTRICAL DIAGRAM TERMINAL REFERENCES Single Color LED A PRODUCT IDENTIFICATION AND DATE CODES Shift LED Plating A 7 5 Force,9,9 Day of year Year C 0, (.) 9,7 (.8) 5x R 0, A (.97x R.0) 8,5 (.5) Tactile Switches Ø 6,6 (ø.60) Ø 5 (ø.96),85,85 (.) (.) 8, (.) 9,8 (.86), (.7) 8,6 (.9) 0,6 (.0) C i-color LED YG AG/CY G Y CG/AY i-color LED RG AG/CY AG/CR R CG/AR 0,6 5, (.57) (.0) (.05) 8,5 ±0, 8,05 ±0,5 (0±.008) (.6±.006), (.05) TRAY SUITALE FOR PANEL THICKNESS OF.8MM MAX DETAIL Q COUPE -,5 (.5) 0,6 COUPE A-A (.7) 0,8 (.5) A 9, (.866) 7 (.6),9 (.76) R 6 (.0),5 (.86) 6± (5.7±.09),95,95 5,5 6,6 (.7) (.60) SEE DETAIL Q 90± (.7±.09) A 7,6 7,6 0 7,6 7 (inches)

196 KSF & KSFI Series Soft Actuated Tact Switch Features/enefits Soft actuated switch Sealed front end Top and side actuated Typical Applications Low profile keyboards Automotive interfaces Industrial control Tactile Switches Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make conact = SPST, N.O. TERMINALS: THT pins Mechanical Force Operating life Travel Type (N) (operations) (mm) KSF0MLFT.5 ± , ± 0. KSF0MLFT.9 ± , ± 0. KSF0MLFT.0 ± , ± 0. KSF0M5LFT 5. ±.0 00, ± 0. KSFI0V970SH LFT. ±.5 00, ± 0.5 KSF0M LFT.6 ± 0. 00, ± 0. KSFI0M 70SHLFT. ± , ± 0.5 Overload resistance: 0N, time Sealing: IP60 or IP67 Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma ma DIELECTRIC STRENGTH (50 Hz, min.): > 50 Vrms CONTACT RESISTANCE: < 00 m Ω INSULATION RESISTANCE (00 V, initial stage): > 0 9 Ω OUNCE TIME: < ms Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -0 C to 5 C Process SOLDERING NOTE: Other configurations of haptics and terminals are available upon demand. Please also refer to KSF and KSFI Mk catalogues pages for other options. This product is designed and manufactured for general electronic devices. For systems where reliability and safety are required, please contact your sales representative to secure product integration and function to secure usage. Packaging In boxes of 50 pieces (V type) or 500 pieces (M type). How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S 0 L F T Type F Flat membrane FI Soft actuator Insertion M Manual (bulk packaging) V Automatic (bulk packaging)** * valid for KSFI only ** valid for KSFI MK series only *NOTE: Products must be checked according customers soldering parameters especially in terms of flux resistance. Sealing IP60 IP67 Contact Material Silver Gold Operation Force.5 N (50 grams)*.9 N (90 grams)* N (00 grams)* 5 5. N (50 grams)* 9. N (0 grams)** RoHS compliant and compatible. Tin plated. 7

197 KSF & KSFI Series Soft Actuated Tact Switch KSF KSFI 0V 8, 0.,06, Ø.6 7, 9,5 Ø,5 Ø 0,9 ( holes) 5,08 Recommended PC (component side) 0,55 x 0, 7,6 0,55 x 0,.6 5, x ,, Tactile Switches 7, 5,08 75

198 KSA & KSL Series Sealed Tact Switch Specification Features/enefits Designed for automatic or manual insertion Cambered terminals to ensure self retention Top or side actuated Large choice of caps RoHS compliant and compatible Typical Applications Automotive Industrial Telecommunication networks Electrical Silver Gold Tactile Switches CONTACT ARRANGEMENT: SPST, N.O. DOULE OVERMOLDING ON TERMINAL SEALING: IP60 TERMINALS: PC pins, ground pin optional Mechanical Actuation force Operating life Travel to Type N (operations) make KSA0M, ± 0, 00,000 0,5 ± 0, KSA0M, ± 0,,000,000 0,5 ± 0, KSA0M ± 0,75 00,000 0,6 ± 0, KSA0M5 5 ±,5 00,000 0,7 ± 0, KSA0M9 ± 0,75 500,000 0,6 ± 0, KSL0M, ± 0, 00,000 0,5 ± 0, KSL0M, ± 0,,000,000 0,5 ± 0, KSL0M ± 0,75 00,000 0,6 ± 0, KSL0M5 5 ±,5 00,000 0,7 ± 0, KSL0M9 ± 0,75 500,000 0,6 ± 0, NOTE: Other versions in terms of force, termination length and corrosion protection available. Please contact your sales representative. This data sheet does not provide enough information for applications which require a certain level of quality or safety such as automotive, medical systems, safety equipment. Please contact your sales representative to get contractual specification package. MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma ma DIELECTRIC STRENGTH: 50 Vrms CONTACT RESISTANCE: 00m Ω INSULATION RESISTANCE (00 V): 0 9 Ω OUNCE TIME: ms Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -0 C to 85 C -55 C to 5 C Process Wave soldering compatible with lead free soldering profile. Packaging Can be delivered in tubes of 65 pieces for automatic insertion or in boxes of 500 pieces for manual insertion (50 pieces for KSL, KSLV, KSAV). How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. SWITCH K S L F T Actuator Type A Short hard plastic L Long hard plastic Ground Terminal 0 Without With* Insertion M Manual (bulk packaging) A Automatic (tube packaging) V Vertical (bulk packaging)* *Note: Ground terminal not compatible with V insertion Contact Material Silver contacts Gold contacts Operation Force. N (0 grams), 00,000 operations. N (0 grams),,000,000 operations N (00 grams), 00,000 operations RoHS compliant and compatible. Tin plated. 5 5 N (500 grams), 00,000 operations 9 N (00 grams), 500,000 operations UTTONS uttons must be ordered separately and will be supplied in bulk. T N K 0 utton Style K0 0 mm square snap-on K0 ø8 mm round snap-on K0 8,5 x,8 mm single floating K0 8,5 x,8 mm double floating K05 5 mm square K06 0 x,5 mm snap-on handle K07 5 mm square K08 9,9 x 5 mm rectangular K09 ø6, mm round utton Color 0 Dark gray 0 Light gray 0 Yellow 0 Red 50 Green 60 lue 70 Gray-blue 80 Ivory 90 lack *NOTE: Please note that all buttons are not RoHS compliant. Please check the compliance with your C&K sales representative. (inches) 76

199 KSA & KSL Series Sealed Tact Switch ACTUATOR TYPE KSA & KSL ±0,5 (.9±.006),06±0, (.0±.00) 8,±0, (.±008) Ø,8±0,05 (.89±00) Ø,0 (.8),±0, (.0±.00) Tactile Switches,±0, 0,5 (.08±.00) 7,6 ±0, (.0±008) 9±0, (.5±008),±0, H (.65±.008),6±0, (.0±.00) 5,08 ±0, (.0±00) 0,5 x 0,±0,0 (.0 x.0±.00) 7,±0, (.9±00) Type H mm inch KSA,7±0, (.85) KSL 9,9±0, (.90) 7, ±0, (.9±00) GROUND TERMINAL 0 WITHOUT * WITH *Not compatible with V insertion 77 (inches)

200 ,85 (.9) 8,0 (.5),5 (.8),5 (.00) 5,08 (.0) KSA & KSL Series Sealed Tact Switch INSERTION M MANUAL (ULK PACKAGING) 8, (.) PC LAYOUT Ground terminal (option) 0,5 (.08) Tactile Switches 7,6 (.0) 9,0 (.5), (.65) 0,5 x 0, (.00 x.0) 5,08 (.0) A AUTOMATIC (TUE PACKAGING, 65 PIECES PER TUE) 8,±0, (.±.008) ø,8±0,05 ø -0,06 ( ) 0,5 (.08),06±0, (.0±.00) C COURSE RELATIVE,7±0, (.85±.008),6 (.0), ±0, (.0±.00) ø0,9+0,/-0,0 ( /-.000) ø 0,9 (.5) 7,6 (.0) 7.6 (.0) PC LAYOUT,±0, (.65±.008),6 ±0, 9,5 ±0, 0,5 x 0,±0,0 (.7±.0) (.00 x.0±.00) 5,08±0, (.0±.00) 5,08 (.0) V VERTICAL PC LAYOUT 7,6 (.00) ø, (.07) 5,5 (.07) 5,08 (.00) ø0,9 (.05) 5,08 (.0) 7,6 (.00) 9,5 (.7) 0,5 x 0, (.00 x.0) 0,8 x 0, (.0 x.0) 0, (.06),5 (.0),0 (.8) L DIMENSION L Type L mm inch KSA0V 5,8.8 KSL0V,.7 OPERATING FORCE OPTION CODE OPERATING FORCE. N (0 grams) 00,000 operations. N (0 grams),000,000 operations.0 N (00 grams) 00,000 operations N (500 grams) 00,000 operations 9.0 N (00 grams) 500,000 operations 78 (inches)

201 0,5 (.00) KSA & KSL Series Sealed Tact Switch CONTACT MATERIAL OPTION CODE CONTACT MATERIAL Silver contacts Gold contacts SEALING OPTION CODE SEALING Sealing level IP60 Tactile Switches UTTONS uttons must be ordered separately and will be supplied in bulk. UTTON TYPE KSA KSL KSAV KSLV K0 X K0 X K0 X X X X K0 X X X X K05 X X K06 X K07 X X K08 X X K09 X X 0,5+0,/-0,0 ( /-.000) 0,8 (.0),50,05 (.8.00) K0 R 0, (.0) 8,0 (.5) K0,50, (.77.00),70, (.6.00) 8,0 (.5),7 (.6),5 (.77),0 (.09),0, (.7.00),0 (.09),0 (.09) 8,0 (.5), (.7) 0,0 (.9),0 (.09) R 0,5 (.00) 0,0 (.9) 00, (.9.00) ø8,0+0,0/-0, ( /-.008) 8,0 (.5) 00, (.9.00) R 0,5 (.00) 79 (inches)

202 KSA & KSL Series Sealed Tact Switch K0 K0,0 (.57),8 (.50),00, (.8.00),0 (.57) R 0, (.008) 9,50, (.7.00),0+0,05/-0,0 ( /-.000) 9,5 (.768) 8,5 (.78) Tactile Switches K05 5,60, (.0.00) K06,0 (.8) R 0, (.0),0 (.09) 5,6 (.0) 5,6 (.6),5 (.77),5 (.77),7 (.6),5 (.77) 8,7 (.),0 (.09), (.7) 0,0 (.9),0 (.09) 0,0 (.9),5 (.098) 5,0 (.97) K07 5,0 (.97) K08,5 (.77) 9, (.70) 8,99 (.5) 9,0 (.5) 5,0 (.97),50 (.77) 5,0 (.97) 0,0 (.9) 9,0 (.5) K09 ø,8 (.7) ø6, (.5) 80 (inches)

203 KSA & KSL MKII Series High Performance Sealed Tact Switch Features/enefits Highest tact switch sealing performance Improved sealing through a modification of the crimping technique and to a double overmolding of the terminal Totally sealed Up to M operations RoHS compliant and compatible Specification CONTACT ARRANGEMENT: SPST, N.O. TERMINALS: PC pins SEALING: IP65 Double overmold on terminals Mechanical Actuation force Operating life Travel to Type N (grams) (operations) make KSA0M, ± 0, 00,000 0,5 ± 0,5 KSA0M, ± 0,,000,000 0,5 ± 0,5 KSA0M,5 ± 0,5 00,000 0,6 ± 0,5 KSA0M5 5 ±,5 00,000 0,7 ± 0,5 Packaging Delivered in boxes of 500 pieces (50 pieces for KSL) NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Typical Applications Automotive Industrial Telecommunication networks Household appliances Heating control systems Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma ma DIELECTRIC STRENGTH: 50 Vrms CONTACT RESISTANCE: 00m Ω INSULATION RESISTANCE (00 V): 0 9 Ω OUNCE TIME: ms Environmental Silver Gold OPERATING TEMPERATURE: 0 C to 85 C 0 C to 5 C STORAGE TEMPERATURE: 0 C to 85 C 55 C to 5 C Process Wave soldering compatible with lead free soldering profile. Tactile Switches Other versions in terms of force, termination length and corrosion protection available. Please contact your sales representative. This data sheet does not provide enough information for applications which require a certain level of quality or safety such as automotive, medical systems, safety equipment. Please contact your sales representative to get contractual specification package. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local represenative. Type A Short hard plastic L Long hard plastic K S 0 Ground Terminal 0 Without Insertion M Manual (bulk packaging) A Automatic (tube packaging) L F T Sealing High sealing performance Contact Material Silver contacts Gold contacts Operation Force. N (0 grams), 00,000 operations. N (0 grams),,000,000 operations N (00 grams), 00,000 operations 5 5 N (500 grams), 00,000 operations 9 N (00 grams), 500,000 operations RoHS compliant and compatible. Tin plated. 8 (inches)

204 KSA & KSL MKII Series High Performance Sealed Tact Switch TYPE KSA & KSL MANUAL INSERTION Tactile Switches 0, 8.,5,,7, ø,8 ÿ,6 +0, ø 0,9 0 (x HOLES) Recommended PC (component side) 7, , x 0. 5,08 6, 6, KSA & KSL AUTOMATIC INSERTION 0, 8,5,,7, ø,8 ø,6 HOLES ø 0,9 PC LAYOUT 9.5 5, x 0. 6, 6, 7,6 5,08 8

205 Features/enefits Spherical actuator allows actuation force off center ± 0 with regard to vertical RoHS compliant and compatible Designed for mechanisms Compliant side actuation Typical Applications Automotive Cranes, off road, railway Factory automation Security systems KSJ Series Spherical Actuator Tact Switches Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. DISTANCE ETWEEN UTTON CENTERS (min.): 7.6 (0.00) TERMINALS: PC pins SEALING: IP60 Mechanical Operating life Operating life Type Actuation force (operations) (operations) Travel to N (grams) axial radial make (mm) KSJ0M60SH ± 0,5 00,000 0,000 0,6 ± 0, KSJ0M80SH,0 ± 0,8 00,000 0,000 0,55 ± 0,5 KSJ0M80SH ± 0,5 00,000 0,000 0,5 ± 0, KSJ0M980SH,9 ± 0,8 00,000 0,000 0,7 ± 0,5 Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -0 C to 85 C -55 C to 5 C Packaging Delivered in boxes of 50 pieces. Tactile Switches Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mv 0 mv MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma ma DIELECTRIC STRENGTH (50 Hz, min.): 50 Vrms CONTACT RESISTANCE: 00m Ω INSULATION RESISTANCE (00V): 0 9 ohms OUNCE TIME: ms Process Wave soldering, compatible with lead free soldering profile. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. This data sheet does not provide enough information for applications which require a certain level of quality or safety such as automotive, medical systems, safety equipment. Please contact your sales representative to get contractual specification package. * Please contact your C&K represenative for any question regarding the product intergration. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed in the table above, please consult your local represenative. K S J S H L F T Ground Terminal 0 Without With* Insertion M Thru-hole V Vertical* Sealing Sealed IP 60 Contact Material Silver contacts Gold contacts Hardness 60SH 60 Shore Actuator 80SH 80 Shore Actuator RoHS compliant and compatible. Tin plated. Operation Force N (00 grams), 00,000 operations N (00 grams), 00,000 operations *Note: ground terminal option not available with V version. The bracket for the V version plays this role. 8 (inches)

206 , (.65), (.65) 5,08 (.0) KSJ Series Spherical Actuator Tact Switches KSJ Application area limits of operating force 60 5, (.05) R, (.087) 60 Recommended direction for a radial actuation 6,65 (.6), (.07) 0 MAX Tactile Switches 7,6 (.0) 9,0 (.5),7 (.85) 5,08 (.0) 0,5 x 0, (.00 x.0) KSJ0M 7, (.9) 7, (.9) INSERTION M THRU-HOLE V VERTICAL,850, (.9.00),50, (.8.00) 5,50, ( ) 0,0, (.06.00) 8,0 (.5) 9,0 (.5) 7,6 (.0) PC LAYOUT Ground terminal (option) 5,08 (.0) 0,5 x 0, (.00 x.0) 5,080, (.0.008) 7,80, (.07.0) 9,50, (.7.008) PC LAYOUT 0,8 x 0, (.0 x.0) 0,5 x 0, (.00.0),50, (.0.0) 6,0 (.6) 7,850, ( ) 0,0,05 (.06.00) ø0,9 (.05) 7,6 (.0) ø,+0,/-0,0 ( /-.000) 5, (0.09) 7,6 (.0),5 (.0) 5,08 (.0) ø0,9+0,/-0,0 ( /-.000) 8 (inches)

207 PTS65 Series,5 mm Tact Switches Features/enefits Compact size 6 x.5 mm Variety of switch heights Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation Computer products Industrial Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: SPST, N.O. TERMINALS: PC pins Mechanical ACTUATION FORCE: PTS65L models: 0 grams. PTS65H models: 00 grams. LIFE EXPECTANCY: 0,000 operations. Electrical CONTACT RATING: 50 V DC. DIELECTRIC STRENGTH: 50 V AC min. CONTACT RESISTANCE: 00 mω max. initial. INSULATION RESISTANCE: 0 Ω min. Environmental OPERATING TEMPERATURE: -0 C to 60 C NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Process SOLDERING: Preheating to 00 C for 5 sec. max. Keep flux flush with top surface of PC; do not apply to component side of PC and area where terminals are located. Soldering to 55 C for 5 sec. max. Clean by brushing on solder surface. Do not clean switch with solvents. Materials ASE: 6/6 nylon or glass filled polyester (PT) (UL 9V-0). ACTUATOR: 6/6 nylon or polyacetal (UL 9H). COVER PLATE: PTS65S and PTS65V models: Tin plated stainless steel DOME CONTACTS: Phosphor bronze, silver clad. STATIONARY CONTACTS: rass, silver plated. TERMINALS: rass, silver plated. Insert molded. Packaging ulk packaging. Tape & reel for: PTS65SxSMTR, 700 pcs per reel Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. P T S 6 5 L F S Termination S Straight V Vertical Actuation Force L 0 grams H 00 grams Insertion Type* NONE Thru hole SMTR Surface mount, tape & reel RoHS compliant and compatible. Silver plated. Actuator Height to PC / Ground Pin, (.69), Thru-hole and SMT 50 5,0 (.97), Thru-hole,5 (.), Vertical 9,85 (.5), Vertical * SMTR only available with PTS65 Actuator Height options. 85 (inches)

208 PTS65 Series,5 mm Tact Switches SERIES PTS65,5 (.059) 0,6 MAX. (.05) x,0 (.8) "H",6 (.06),5 (.098), (.69), (.09) 8,50,5 (.5.00) Tactile Switches,0 x (.09),5 (.8) 6,5 (.56),5 (.8) 7,9 (.) For H dimension please refer to chart on next page 6,0 (.6),5 x (.8) TERMINATION,5 x (.098) 0, x (.0),5 x (.098),0 x (.09) "L" 0, x (.0) 0,5 x 5,0 (.00) (.97) 7,0 (.76) 0,6 MAX. (.05) x For L dimension please refer to chart on next page,0 (.8) 7, (.87) S STRAIGHT V VERTICAL, 8,50,5 (.09) (.5.00),0 x (.09) 6,5 (.56) 7,9 (.),5 x (.8),5 x (.098) 0, x (.0),5 x (.098),0 x (.09) 0, x (.0) 0,5 x 5,0 (.00) (.97) 7,0 (.76) 6,5 (.56) PC LAYOUT ø, TYP. (.05),5 (.098) 5,0 (.97) PC LAYOUT ø, x (.05) ø,0 x (.09) 7,0 (.76) SMT (0.8).5 (0.059) 0. (0.0).5 (0.8). (0.69) 9 (0.5) (0.09) PC LAYOUT. (0.055) 7. (0.87) 0. (0.0) 86 (inches)

209 PTS65 Series,5 mm Tact Switches ACTUATION FORCE OPTION CODE L H FORCE 0 grams 00 grams ACTUATOR HEIGHT OPTION HEIGHT H or CODE LENGTH L TERMINATION SCHEMATIC, (.69) Thru-hole & SMT 50 5,0 (.97) Thru-hole,5 (.) Vertical 9,85 (.5) Vertical Tactile Switches INSERTION TYPE SMTR 5,±0, (0,05±0,00),0 (0,57),0 (0,7),0 TYP (0,079) ø,5 (ø0,59),75±0, (0,069±0,00) 7,5 (0,95) 6,0±0, (0,6±0,0) DIRECTION OF FEED 87 (inches)

210 PTS6 Series SMT Top Actuated Switches Features/enefits 6. x 6. mm footprint Multiple heights Ground pin option Typical Applications Metering White goods Home and garden equipment Tactile Switches Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: G type for SMT Mechanical TRAVEL: 0.0 mm ±0.5 mm for 60 &50 gf 0.0 mm ±0.5 mm for 0 gf OPERATING LIFE: 00,000 cycles OPERATION FORCE: 60 gf ±50 gf blue actuator 50 gf ±50 gf red actuator 0 gf ±80 gf black actuator Packaging Switches in reels of,500 pieces. Dimensions of reels according to EIA 8 External diameter 0 mm Electrical MAXIMUM VOLTAGE: VDC MAXIMUM CURRENT DC: 50 ma DIELECTRIC STRENGTH: 50 VA C (mn) CONTACT RESISTANCE: 00 m Ω INSULATION RESISTANCE: 00 M Ω OUNCE TIME: < 5 ms Environmental OPERATING TEMPERATURE: -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S 6 S M T R L F S Ground Pin S No ground pin T With ground pin RoHS compliant, silver plated Actuation Force M 60 gf K 50 gf P 0 gf ody Type 5.5 mm height. mm height. mm height Packaging SMTR Tape & Reel 88

211 PTS6 Series SMT Top Actuated Switches NO GROUND PIN H =.5,., or. mm Ø H 8, 0, SCHEMATIC 6, 0,75,5 6, 6,6, 8, RECOMMENDED PC LAYOUT,5 Tactile Switches GROUND PIN H =.5,., or. mm Ø H 5 8, 0, SCHEMATIC 8, 6, 0,75 0,75 5,5 6,6, 5,5 6, RECOMMENDED PC LAYOUT 89

212 PTS65 Series 6 mm Tact Switches Features/enefits Compact size 6 x 6 mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation Computer products Industrial Tactile Switches Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: SPST, N.O. TERMINALS: PC pins Mechanical ACTUATION FORCE: 0 grams, 60 grams, 00 grams, 60 grams LIFE EXPECTANCY: 00,000 operations. Electrical CONTACT RATING: 50 V DC. DIELECTRIC STRENGTH: 50 V AC min. CONTACT RESISTANCE: 00 mω max. initial. INSULATION RESISTANCE: 0 Ω min. Environmental OPERATING TEMPERATURE: -0 C to 60 C Process SOLDERING: Preheating to 00 C for 5 sec. max. Keep flux flush with top surface of PC; do not apply to component side of PC and area where terminals are located. Soldering to 55 C for 5 sec. max. Clean by brushing on solder surface. Do not clean switch with solvents. Packaging ulk packaging. Tape & reel for the SMT type: Reels of,000 pieces for, and 5,0 mm height Reels of 700 pieces for 7,0 mm height Reels of 500 pieces for 9,5 mm height Reels of 00 pieces for,0 mm height NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S 6 5 Termination S Straight T Straight with ESD pin V Vertical Actuator Shape NONE Round actuator, All versions J Square actuator,. mm side THT versions only (No ESD pin - not available with Termination T style Actuation Force L 0 grams M 60 grams H 00 grams K 60 grams L F S Insertion Type Thru hole SMTR9* Surface mount, tape & reel Switch height from PC for S and T only (H dimension see actuator height drawings), (.69), thru-hole and SMT 50 5,0 (.97), thru-hole and SMT 70 7,0 (.75), thru-hole and SMT 7 7, (.87), thru-hole, square actuator. mm side only 95 9,5 (.7), thru-hole and SMT,0 (.5) SMT only RoHS compliant and compatible. Silver plated. *Only the straight type termination without ESD pin is available in SMT type. Switch length from front leads for V only (H dimension see actuator height drawings),5 (.), vertical 9,85 (.5), vertical 58 5,85 (.0), vertical 6 6,5 (.), vertical, square actuator. mm side only 8 8,5 (.9), vertical 90

213 PTS65 Series 6 mm Tact Switches TERMINATION S STRAIGHT 0,5 Max,8,5, ± 0, SCHEMATIC 0,7,5 T STRAIGHT WITH ESD PIN 6 0,7 ± 0, 6 Tactile Switches 0,5 Max,5, ± 0, SCHEMATIC,8,5,5 0,7 0, 0,7 6,5 7,9 6,5 5 0,7± 0, 6, 0, ± 0,,5 PC LAYOUT 5, x Ø 6,5 Ø,5 V VERTICAL SCHEMATIC Push 7,5 Ø,5 x Ø,,5± 0,05,05 6,,5 0, 6,5 7,9 Ø,5,5 PC LAYOUT 6,5 x Ø,55 ± 0,05,95, 0,7,95 0,,55± 0, x Ø 7±0,05 PC LAYOUT,5 ± 0,5,,9± 0, 7 8,5 9

214 PTS65 Series 6 mm Tact Switches TERMINATION SMT FOR., 5.0, 7.0, 9.5 MM HEIGHT.0 MM HEIGHT ONLY (0,) Tactile Switches 0, -0,0 0,5 9 6 Ø,5 0,7±0,,5, ±0, 6 0, -0,0 0 6,,5 (0,) 9 6, Ø,5 0,7 ± 0,,5 ±0, 9,5 6, SCHEMATIC 5,8, PC LAYOUT ACTUATOR SHAPE Ø,5, 7,5, xø0,9 Ø,5,05 6,,,,85,,8 SCHEMATIC Push,55 ± 0,05 xø,,5 ±0,05,95, 0,7,5 6, 7± 0,,95, 0, 0,,55± 0, 6, xø 7± 0,05 RECOMMENDED PC LAYOUT 8,5± 0, 9

215 PTS65 Series 6 mm Tact Switches ACTUATOR SHAPE,,8,6,,85 SCHEMATIC 0, Max 7,,5, 0, 6,5 7,9 6, 0,7 ± 0, Ø,5 Ø,5 6,5,,5 RECOMMENDED PC LAYOUT xø 6,5 Tactile Switches ACTUATION FORCE OPTION CODE L M H K FORCE 0 grams lack 60 grams lue 00 grams Gray 60 grams Red ACTUATOR HEIGHT Switch height from PC for S and T only OPTION SCHEMATIC CODE DIMENSION H TERMINATION Without EMC pin With EMC pin 0, -0,0 0 (0,) H ± 0.,5, (.69) Thru-hole and SMT 50 5,0 (.97) Thru-hole and SMT 70 7,0 (.75) Thru-hole and SMT 95 9,5 (.7) Thru-hole and SMT,0 (.5) SMT Switch length from front leads for V only OPTION SCHEMATIC CODE DIMENSION H TERMINATION Without EMC pin With EMC pin,95 0,,55± 0,,05,5 (.) Vertical 9,85 (.5) Vertical 58 5,85 (.0) Vertical 8 8,5 (.9) Vertical, H ± 0, 9

216 PTS65 Series 6 mm Tact Switches TAPE & REEL Cover tape (Polyester) Carrier tape (Polystyrene) Pocket Height Tactile Switches Reel (Polystyrene),5 +0, 0 tape Cover ±0, ±0,,75±0, H 7, For. and 5.0 mm: Height 5. mm For 7.0 mm: Height 7. mm For 9.5 mm: Height 0. mm For.0 mm: Height. mm 6±0, ±0, 9

217 PTS65 V SMT Series 6 mm SMT Side Actuated Tact Switch Features/enefits Full SMT processing Strong PC soldering pads Compact 6 x 6 mm design Typical Applications Consumer Products Set Top and Access oxes Instrumentation Home and Garden Equipment Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: G type for SMT TRAVEL: 0.5 mm +0./-0. mm OPERATING LIFE: 00,000 cycles Mechanical Operating Actuator Color Part Number Force (gf) PTS65 VN SMTR9 LFS 00 ± 0 Dark grey PTS65 VM SMTR9 LFS 60 ± 50 Yellow green Electrical MAXIMUM VOLTAGE: V DC MAXIMUM CURRENT: 50 ma DIELECTRIC STRENGTH: 00 V AC (mn) CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: 00 MΩ OUNCE TIME: 0 ms Environmental OPERATING TEMPERATURE: -0 C to 70 C STORAGE TEMPERATURE: -0 C to 80 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Recommended solder paste thickness is 5µm Packaging In reels of 650 pieces Dimensions of reels according to EIA 8 External diameter 0 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S 6 5 V S M T R 9 L F S Termination V Vertical Actuation Force M 60 gf N 00 gf Actuator Length. mm from metal front face Termination SMTR9 Surface mount, tape & reel RoHS compliant and compatible. Silver plated. 95

218 PTS65 V SMT Series 6 mm SMT Side Actuated Tact Switch RECOMMENDED PC LAYOUT Tactile Switches 6 9,5 7, 6,,9,9,, (Tolerance ` 0.) RACKET FACE,5 7, 0, 6,6,7 0, Max,5,6 SCHEMATIC Cover tape (Polyester) Carrier tape (Polystyrene),5 (8,6) 0, ` 0, 7 n,5, x0,7,6,5,,5` 0, 9,5 Reel (Polystyrene) SECTIONA-A Ø,5 +0, 0,75 A A 96

219 PTS5 Series mm Tact Switches Features/enefits THT and SMT terminations Various heights Snap fit actuator option Typical Applications Consumer products Instrumentation Computer products Industrial Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: make contact SPST, N.O. TERMINALS: PC pins for THT and G type for SMT TRAVEL: 0.0 mm ± 0.5 mm Mechanical OPERATING LIFE: 00,000 cycles OPERATING FORCE: 80 gf ± gf ± 50 Environmental OPERATING TEMPERATURE: -0 C to 70 C Process SOLDERING: This component is suited to the following methods: Infrared reflow soldering in accordance with IEC for SMT version Wave soldering compatible with lead free soldering profile Packaging Tactile Switches Electrical MAX VOLTAGE: VDC MAX CURRENT: 50 ma DIELECTRIC STRENGTH: 50 V AC (mn) CONTACT RESISTANCE: <00 mω INSULATION RESISTANCE: >00M Ω OUNCE TIME: < 5 ms NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Soldering Style Height Packaging Parts per Packaging THT All heights Plastic bag 500 SMT. mm tape & reel 900 SMT. mm with pegs tape & reel 600 SMT 7. mm tape & reel 500 SMT 7. mm with pegs tape & reel 500 SMT 8.5 mm tape & reel 500 SMT 8.5 mm with pegs tape & reel 00 SMT mm tape & reel 50 Dimensions of reels according to EIA 8. External diameter 0 mm. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S 5 S - L F S Style S Straight, top actuated Actuator Shape NONE Round J Snap fit 7 height only Actuator Force M 80 grams K 50 grams Termination & Packaging NONE THT in bags SMTR SMT in tape & reel Pegs Option NONE no pegs P with pegs - only for SMT version in round and square snap fit actuator (not for switch height) RoHS, silver plated Switch Height. mm round actuator 7 7. mm sqaure snap fit actuator mm round actuator.0 mm round actuator with ribs Other heights with the round actuator are available upon request. Different minimum order quantities than the stand may apply. 97

220 PTS5 Series mm Tact Switches THT VERSION WITH ROUND ACTUATOR H=. & 8.5 MM (other height upon request) Ø7 H Tactile Switches 0,,5,7, 5 holes Ø, SCHEMATIC,5 ±0,05 5 ± 0,05 RECOMMENDED PC LAYOUT SMT VERSION WITH ROUND ACTUATOR AND PEGS H=. & 8.5 MM (other height upon request) Ø7 0,,,5 H xø,5` 0, 5, ±0, 0,05 +0, ±0,5 SCHEMATIC, ±0,05,5 5 ±0,05 9 ± 0,05 x Ø RECOMMENDED PC LAYOUT 98

221 PTS5 Series mm Tact Switches THT VERSION WITH SQUARE SNAP FIT ACTUATOR H= 7. MM,8, ± 0,5 Ø 7,8 0,,5,,7, 7, +0,5 0 Ø 5 holes Ø, SCHEMATIC,5 ±0,05 5 ±0,05 RECOMMENDED PC LAYOUT Tactile Switches SMT VERSION WITH SQUARE SNAP FIT ACTUATOR AND PEGS H= 7. MM Ø 7,8, ± 0,5,8 0,, Ø,5 5, ±0,,5, 7, +0,5 0 0,05 +0, ±0,5 SCHEMATIC, ± 0,05 x Ø Ø 5 ± 0,05 9 ± 0,05,5 RECOMMENDED PC LAYOUT 99

222 PTS5 Series mm Tact Switches THT VERSION WITH ROUND RIED ACTUATOR H=.0 MM Ø 7 Ø 6 Ø 7,5 6, Tactile Switches 0,,5,7,,5± 0, holes Ø, SCHEMATIC,5 ± 0,05 Ø7 Ø 6 Ø 7,5 6, 0, Ø,8 5 5 ± 0,05 RECOMMENDED PC LAYOUT 0, SMT VERSION WITH ROUND RIED ACTUATOR H=.0 MM, 0, 5, ±0, +0,05 0, SCHEMATIC Ø,8,5± 0,,5, ±0,05 5 ± 0,05 RECOMMENDED PC LAYOUT 00

223 ITS Series Illuminated Tact Switch Features/enefits Vertical and right angle SMT models Vertical and right angle thru-hole models Multiple caps and legends Several LED colors and bi-color options RoHS compliant /compatible Typical Applications Consumer electronics Server/storage Medical devices NEW Right Angle SMT Test/Measurement/Instrumentation Audio/Video Computers/Peripherals Security Specification FUNCTION: N.O. momentary action TERMINALS: SMT & Thru-hole Mechanical OPERATING FORCE: 60 ± 50gf for V; V; V; R; R models 0 ± 50 gf for R model OPERATING LIFE: 50,000 cycles (50m Ω max) RECOMMENDED OPERATING STROKE: 0.5mm ± 0.mm Electrical RATING: VDC CONTACT RESISTANCE: <00m Ω (initial) DIELECTRIC WITHSTANDING VOLTAGE: >50VAC (50-60 Hz) between terminals - min.ω INSULATION RESISTANCE: >00M Ω OUNCE TIME: <0ms Packaging Thru-hole: 00 pieces per tray SMT: tape & reel (see V or V mounting style drawings) Environmental OPERATING TEMPERATURE: -5 C to +70 C STORAGE TEMPERATURE: -5 C to +80 C Process SOLDERAILITY: Thru-hole - wave compatible SMT - convection or IR reflow compatible Materials CONTACTS/TERMINALS: DOME: ASE: PA ACTUATOR: PA COVER: PA ase metal; brass Plating; Ag ase metal: Phosphor bronze Plating; Ag Caps Caps are ordered separately and shipped bulk. Thru-hole versions available with caps assembled under custom part number. Contact customer service for details. Tactile Switches How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. LED I T S F S Color # See color table Color # See color table LED rightness F Standard Mounting Style V Vertical thru-hole V Vertical SMT Gull wing V Vertical SMTGull wing with J bend LED R Right angle thru-hole R Right angle thru-hole.5mm leads R Right angle SMT Packaging T Tray R Tape & reel Force S Standard actuation force 60 grams: V, V, V, V, R, R options 0 grams: R option LED Color 00 No light 0 Red Red/Yellow Red/Green Red/lue 0 Yellow Yellow/Red Yellow/Green 0 Green Green/Red Green/Yellow 0 lue lue/red 50 White 60 True green * Other colors available by request 0

224 ITS Series Illuminated Tact Switch LED COLOR / RIGHTNESS Tactile Switches Standard LED Color Options LED Characteristic units Red () Yellow () Green () lue () White (5) True Green (6) Recommended Operating 5VDC 0mA 0mA 0mA 0mA 0mA 0mA Forward Current ma 0 ma 0 ma 0 ma 0 ma 0 ma 0 ma Peak Pulsing Current (/8 khz) ma 5 ma 5 ma 5 ma 5 ma 5 ma 5 ma Power Dissipation mw 75 mw 75 mw 75 mw 08 mw 08 mw 08 mw Forward 0mA Volts.5 Volts Max..5 Volts Max..5 Volts Max..6 Volts Max..6 Volts Max..6 Volts Max. Dominant Wavelength nm 67nm (Typical) 570nm (Typical) 65nm 0mA 590nm (Typical) CIE Coordinates 5nm (Typical) Wavelength at Peak X= nm 65nm (Typical) 57nm (Typical) 60nm (Typical) 0mA 590nm (Typical) Y= nm (Typical) Spectral Half 0mA nm 0nm (Typical) 0nm (Typical) 7nm (Typical) 5nm (Typical) nm (Typical) Luminous 0mA mcd 50mcd Minimum 5mcd Minimum 0mcd Minimum 00mcd Minimum 50mcd Minimum 500mcd Minimum Viewing Angle at 50% LV (@0mA) degrees 50 Typical 0 Typical 0 Typical 0 Typical 50 Typical 0 Typical V - Vertical Thru-hole MOUNTING STYLES ELECTRICAL SCHEMATIC COLOR L L DOT SHOWING LED COLOR IS MARKED FOR MINUS POLE SEE SCHEMATIC TACT COLOR LED (7.) X L L 6.5.5± X (L) P.C.. LAYOUT 7.±0. 6.5±0. L L 6.± L.5±0. TRAY PACKAGING: 00 PIECES L LED TERMINAL L IS TRIMMED LONGER THAN TERMINAL L 0

225 ITS Series Illuminated Tact Switch MOUNTING STYLES V - Vertical SMT; Gullwing 6.8 ELECTRICAL SCHEMATIC COLOR 0. TYP X , X 5 CHAMFER X L ±0.5 TACT DOT SHOWING LED COLOR IS MARKED FOR MINUS POLE (CATHODE) SEE SCHEMATIC 6. L L COLOR LED L L X X L L P.C..LAYOUT Tactile Switches X L L 7.5 TAPE & REEL: 500 PIECES NOTES:. SWITCH WITH TEMPORARY PICK AND PLACE CAP. TYP TYP A.5 TYP HOLE A 6 TYP SECTION A-A 0

226 ITS Series Illuminated Tact Switch MOUNTING STYLES V - Vertical SMT; Gull wing with J bend LED X.8 X 6. Tactile Switches 7 L.8 X L X 6. TYP.5 DOT SHOWING LED COLOR IS MARKED FOR MINUS POLE (CATHODE) SEE SCHEMATIC 7.5 ELECTRICAL SCHEMATIC COLOR L P.C.. LAYOUT L X L L 0. TACT COLOR LED L L SCALE : TAPE & REEL: 500 PIECES NOTES:. SWITCH WITH TEMPORARY PICK AND PLACE CAP. 0. A TYP.5 HOLE TYP.75 SECTION A-A A.6 6 TYP 0

227 ITS Series Illuminated Tact Switch MOUNTING STYLES R - Right Angle; Thru-hole ELECTRICAL SCHEMATIC -A- COLOR L L REF 7.6.±0.05 TACT DOT SHOWING LED COLOR IS MARKED FOR MINUS POLE (CATHODE) SEE SCHEMATIC.5 COLOR LED.5 L 6X L Tactile Switches TYP L.5 L 0.7 TYP P.C.. LAYOUT. TRAY PACKAGING: 00 PIECES -A- R - Right Angle; Thru-hole.5mm leads DOT SHOWING LED COLOR IS MARKED FOR MINUS POLE (CATHODE) SEE SCHEMATIC L TYP 5X TYP L P.C..LAYOUT.5 ELECTRICAL SCHEMATIC.7 L COLOR L L 0 L TACT COLOR LED TRAY PACKAGING: 00 PIECES 05

228 ITS Series Illuminated Tact Switch MOUNTING STYLES R - Right Angle, SMT 7,7 6,7 ELECTRICAL SCHEMATIC COLOR A Tactile Switches,,6,7, 6,5 TACT L X 0,5 COLOR LED L X, HOLE 6,,5 L A L 0,9,8 0,8, X 0,5 X 0,55 X,5 A 5,8 6,5 X 0,5 X,65 X 0,85 X,5 6,5 PC RECOMMENDED TAPE & REEL: 500 PIECES A,5 HOLE,5,75,5 7, +0, 0 5, +0, 0 7, 8, ( ) (5) (,) ( 00),, A, ,5,5 6,5 +0, 0 SECTION A-A ( 0) REEL SCALE : 7, SECTION - 06

229 ITS Series Illuminated Tact Switch FORCE OPTION CODE S FORCE Standard 60 gf - V, V, V, R, R options 0 gf - R option CAPS Use the individual ordering code for each cap 99EA0000 Round cap, clear 9 9 E A Material A Polycarbonate - Natural/Clear Marking 00 No marking Marking Color 0 No marking Tactile Switches Paint Color 0 No paint R0.5 5 X 0. WIDTH P X R0. DETAIL SCALE 5: 8 EACH A A SEE DETAIL SECTION A-A

230 ITS Series Illuminated Tact Switch CAPS 00EA E ECA0E Natural/clear Translucent white, flat edge Matte silver paint laser etch, flat edge Tactile Switches 0 0 E Material A Natural/Clear - polycarbonate Translucent white - polycarbonate C Silver paint laser etch - polcarbonate Paint Color 0 No paint A Matte silver Laser Etch Marking 00 No marking 0 Power On/Off 0 Arrow right 05 Arrow left 06 Arrow up 07 Arrow down 09 Power Arrow up (fill) Arrow down (fill) 97 I/O Marking Color 0 No marking E Laser etch (painted caps only) A ITSXXFRST & 00ECA0E cap A- A R0. 00ECA0E SHOWN 6.±0.05 R0. 0.9±0.05. A SECTION A-A.±0.05 X 0.8 X.8 00E cap dimensions shown are as molded (no paint). R0. TYP X.6 X

231 ITS Series Illuminated Tact Switch CAPS 0 E 0ECA06E Matte silver paint, laser etch, tall oval Material A Natural/clear - polycarbonate Translucent white - polycarbonate C Paint laser etch - polycarbonate Paint Color 0 No paint A Matte silver 7.5 A Laser Etch Marking 00 No marking 06 Arrow up 07 Arrow down Arrow up (fill) Arrow down (fill) A Marking Color 0 No marking E Laser etch (painted caps only) Tactile Switches ±0.05 SECTION A-A X X.6 5 X.8 X 0.8 0E cap dimensions shown are as molded (no paint). 09

232 KSH Series Soft Feeling High Tactile SMT Top Actuated Features/enefits 6. x 6. x 5.0 mm footprint Low contact resistance High number of cycles or pin PC layout Typical Applications Automotive Interior Car AV equipment Electronic musical instrument Tactile Switches Specifications FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST N.O. TERMINALS: J type for SMT TRAVEL:. ± 0. mm Mechanical Operating Operating Life Part Number Force (N) (operations) KSH XJ 50 LFS.6 ± ,000 KSH XJ 50 LFS.0 ± ,000 KSH XJ 50 LFS.5 ± ,000 KSH XJ 50 LFS.0 ±.0 00,000 KSH X5J 50 LFS.5 ±. 00,000 Environmental OPERATING TEMPERATURE: -0 C to 90 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of,000 pieces Dimensions of reels according to EIA 8 External diameter 0 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Electrical MAXIMUM / MINIMUM VOLTAGE: VDC / VDC MAXIMUM / MINIMUM CURRENT DC: 50 ma / 0 µa DIELECTRIC STRENGTH: 50 VA C (mn) CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: 00 MΩ OUNCE TIME: 0 ms How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. K S H J 5 L F S Termination SMT Leads SMT Leads Actuation Force.6 N.0 N.5 N.0 N 5.5 N Contact Plating Silver Termination Style J Leads Height mm LFS RoHS, silver plated 0

233 KSH Series Soft Feeling High Tactile SMT Top Actuated KSH Recommended Layout 7, ± 0, 9 5,,6 KSH 6, ± 0, 5,5,9 6, ± 0,,9 ± 0,, Circuit Diagram Tactile Switches Recommended Layout 7, ± 0,, 9,5 6, ± 0, 5,9,5 6, ± 0,,9 ` 0,, 0,8 0,8 Circuit Diagram, 8, ± 0, 8,6 ± 0, SECTION - 5, ± 0,5 0, ± 0,05 6,6 7,7 SECTION A-A A 6,6 0,7 ± 0, Ø,5 +0, 0 7,5 ± 0,,75 ± 0, 6 +0, -0, A REELING DIRECTION OUT OF PRODUCTION,5 Ø,5 +0, 0 SEE DETAIL R

234 KXT Series Double Action Ultra Low Profile Top Actuated Features.9 x.0 mm footprint.05 mm thickness Dual action Typical Applications Wearable electronics Mobile Phones Portable Electronics Tactile Switches Specification FUNCTION: momentary action CONTACT ARRANGEMENT: Dual action = SPDT, N.O. TERMINALS: G type for SMT TRAVEL: 0. mm ± 0.05 mm TRAVEL: 0. mm + 0. / mm Mechanical Operating force gf Operating Life KXT LHS Push force 00 ± 0 00,000 Push force 00 ± 50 Electrical MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: OUNCE TIME: VDC 50 ma 50 V (50 Hz, min.) 500 mω 00 MΩ 0 ms Environmental OPERATING TEMPERATURE: -0 C to 85 C STORAGE TEMPERATURE: -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 6,000 pieces Dimensions of reels according to EIA RS8 or IEC 86 External diameter 78 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Part Number Description For any part number different from those listed above, please consult your local representative. K X T L H S LHS Lead free, RoHS, Halogen Free, Silver plated Contact Material Silver

235 KXT Series Double Action Ultra Low Profile Top Actuated SCHEMATIC FREE,05 (0,7),,7 7 0,8,,7,9 0,05 st ACTION (00gf) nd ACTION (00gf),85,,9,7,, RECOMMENDED PC LAYOUT Tactile Switches Cover tape (Polyester) Carrier tape (Polystyrene),5 +0, 0 5,5 0, (,) Reel (Polystyrene) 9, Cover tape, CARRIER TAPE 0,5 0,5 A A(/) REEL, + 0 8, Max

236 KMR 6 Series Microminiature SMT Top Actuated IP67 Tactile Switches Features/enefits Watertight IP67 Standard and long life versions No ground pin Ultra low current capabilities Excellent tactile feel Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: Gullwing type for SMT Mechanical Type NG See description below Operating force N (grs) Operating life (cycles) Typical Applications Automotive Medical Consumer Industrial Travel (mm) KMR6NG LFS. (0) ± , mm ± 0. KMR6NG ULC LFS. (0) ± , mm ± 0. KMR6NG LFG. (0) ± , mm ± 0. KMR6NG ULC LFG. (0) ± , mm ± 0. KMR6NG LFS.0 (00) ± , mm ± 0. KMR6NG ULC LFS.0 (00) ± , mm ± 0. KMR6NG LFG.0 (00) ± , mm ± 0. KMR6NG ULC LFG.0 (00) ± , mm ± 0. KMR6NG LFS.0 (00) ± , mm ± 0. KMR6NG ULC LFS.0 (00) ± , mm ± 0. KMR6NG LFS.0 (00) ± , mm ± 0. KMR6NG ULC LFS.0 (00) ± , mm ± 0. KMR6NG LFG.0 (00) ± , mm ± 0. KMR6NG ULC LFG.0 (00) ± , mm ± 0. KMR6NG LFS.0 (00) ±.00 00, mm ± 0. KMR6NG ULC LFS.0 (00) ±.00 00, mm ± 0. KMR6NG LFS.0 (00) ±.00 00, mm ± 0. KMR6NG ULC LFS.0 (00) ±.00 00, mm ± 0. KMR6NG LFG.0 (00) ±.00 00, mm ± 0. KMR6NG ULC LFG.0 (00) ±.00 00, mm ± 0. Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mvdc 0 mvdc MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma* ma* DIELECTRIC STRENGTH: 50 Vrms CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: GΩ OUNCE TIME: ms *For ULC version minimum current is µa at.8 VDC Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 7,000 pieces External diameter 0 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TACTILE FEELING: KMR 6 series with actuation force in N - N - N: 0% KMR 6 series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R 6 N G Total height 6,9 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated Actuation Force. N (0 grams) N (00 grams) N (00 grams) N (00 grams) Contact Material Silver Silver long life* Gold Grounding option NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in N and N actuation force. For other versions, please contact Customer Service. 6 may 6

237 KMR 6 Series Microminiature SMT Top Actuated IP67,,,7,6, 0,6,6 Tactile Switches KMR 6 Series -.9 mm height PC layout shown with ground pin option,,9,6,,8,5 0,55 0,6 0,6 5 TAPE & REEL DE-REELING DIRECTION OUT OF THE TAPE SECTION A-A 7 0 max, ± 0,,75 ± 0, ± 0,05 ø,5 ± 0, +0, -0, 5,5 ± 0,05 A A,95 ± 0, 0,9 ± 0,0 6 0 max GROUND TERMINAL ø,5 +0,5 0,0 ± 0, DIRECTION OF FEED 6 may 6 5

238 KMR 7 Series Microminiature SMT Top Actuated IP67 Features/enefits Watertight IP67 Standard and long life versions No ground pin Ultra low current capabilities Excellent tactile feel Typical Applications Automotive Medical Consumer Industrial Tactile Switches Specification FUNCTION: momentary action CONTACT ARRANGEMENT: make contact = SPST, N.O. TERMINALS: Gullwing type for SMT Mechanical Type NG See description below Operating force N (grs) Operating life (cycles) Travel (mm) KMR7NG LFS. (0) ± , mm ± 0. KMR7NG ULC LFS. (0) ± , mm ± 0. KMR7NG LFG. (0) ± , mm ± 0. KMR7NG ULC LFG. (0) ± , mm ± 0. KMR7NG LFS.0 (00) ± , mm ± 0. KMR7NG ULC LFS.0 (00) ± , mm ± 0. KMR7NG LFG.0 (00) ± , mm ± 0. KMR7NG ULC LFG.0 (00) ± , mm ± 0. KMR7NG LFS.0 (00) ± , mm ± 0. KMR7NG ULC LFS.0 (00) ± , mm ± 0. KMR7NG LFS.0 (00) ± , mm ± 0. KMR7NG ULC LFS.0 (00) ± , mm ± 0. KMR7NG LFG.0 (00) ± , mm ± 0. KMR7NG ULC LFG.0 (00) ± , mm ± 0. KMR7NG LFS.0 (00) ±.00 00, mm ± 0. KMR7NG ULC LFS.0 (00) ±.00 00, mm ± 0. KMR7NG LFS.0 (00) ±.00 00, mm ± 0. KMR7NG ULC LFS.0 (00) ±.00 00, mm ± 0. KMR7NG LFG.0 (00) ±.00 00, mm ± 0. KMR7NG ULC LFG.0 (00) ±.00 00, mm ± 0. Electrical Silver Gold MAXIMUM POWER: VA 0. VA MAXIMUM VOLTAGE: VDC VDC MINIMUM VOLTAGE: 0 mvdc 0 mvdc MAXIMUM CURRENT: 50 ma 0 ma MINIMUM CURRENT: ma* ma* DIELECTRIC STRENGTH: 50 Vrms CONTACT RESISTANCE: 00 mω INSULATION RESISTANCE: GΩ OUNCE TIME: ms *For ULC version minimum current is µa at.8 VDC Environmental Silver Gold OPERATING TEMPERATURE: -0 C to 85 C -0 C to 5 C STORAGE TEMPERATURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 6,000 pieces External diameter 0 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TACTILE FEELING: KMR 7 series with actuation force in N - N - N: 5% KMR 7 series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R 7 N G Total height 7,5 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated Actuation Force. N (0 grams) N (00 grams) N (00 grams) N (00 grams) Contact Material Silver Silver long life Gold Grounding option NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in N and N actuation force. For other versions, please contact Customer Service. 6 may 6 6