Precision Piezo Stage Reference Manual (Open and Closed Loop Versions)
|
|
- Marshall Williamson
- 5 years ago
- Views:
Transcription
1 PPS-20 S e r i e s Precision Piezo Stage (Open and Closed Loop Versions)
2 PPS-20 Piezo Positioner Stage Rev 3.10 MICRONIX USA, LLC Barranca Parkway, E-106 Irvine, CA Tel: Fax:
3 Contents 1. Introduction Product Description Recommended Controllers Technical Data Load Characteristics Model Configurations PPS-20 Order Numbers Preparing to Install the PPS Installation Preparation Package Contents Installing the PPS PPS-20 Installation General Mounting X-Y Mounting Connecting the PPS Atmospheric Environments Open Loop Installation & Wiring Diagram Closed Loop/Encoder Installation & Wiring Diagram Vacuum Environments Handling and Preparation Open loop Installation & Wiring Diagram Closed Loop/Encoder Installation & Wiring Diagram Dimensions PPS-20 with Digital Encoder PPS-20 with Analog Encoder Stacking Configurations Configurations Examples Supplementary Information Maintenance Units and Conventions A. Appendix 15 A.1 DB-9 Standard Male Motor Connector A.2 2 Phase Piezo Motor Wiring Diagram A.3 Open Loop Vacuum Wiring Diagram A.3.1 Straight Through 9-Pin Feed Through A.4 Using the Digital Encoder Module A.4.1 Encoder Module Pin-out A.4.2 Operating and Electrical Specifications A.4.3 Output Signals & Signal Termination for A quad B, Index and limits A.4.4 Resolution A.4.5 Digital Encoder Wiring Diagram A.4.6 Straight Through 25-Pin Feed Through A.5 Using an Analog Encoder A.5.1 Analog Encoder Overview A.5.2 Encoder Pin-out A.5.3 Operating and Electrical Specifications A.5.4 Analog Output (Pins 1,2,6, and 7) A.5.5 Index Window (Pins 3) A.5.6 Resolution A.5.7 Analog Encoder Wiring Diagram A.5.8 Straight Through 15-Pin Feed Through
4 1. 0BIntroduction 1.1 Product Description The PPS-20 is a high-precision, long travel linear piezo stage. Miniature cross-roller bearings assure high stiffness and guiding accuracy for loads up to 20N (Horizontal orientation). It utilizes our patent-pending multi-phase piezo motor resulting in high speed (>2mm/s) and high blocking force (>2N). The PPS-20 is available in travel lengths of up to 50mm, and an optional linear encoder provides nanometer repeatability. Vacuum, Ultra High Vacuum (10-9 torr) and/or Cryo (<4 Kelvin) compatible versions are available. Features: Travel ranges of 11mm, 18mm, 26mm, 38mm, and 51mm Load capacity up to 2kg Optional linear encoder Scale Bracket Carriage Encoder Bracket Encoder Head PPS-20 20mm Open Loop (Shown in center position) Base Scale Bracket PPS-20 20mm Closed Loop with 10nm Analog encoder (Shown in center position) PPS-20 20mm Closed Loop with 2nm digital encoder (Shown in center position) Encoder Bracket Encoder Head 2
5 1.2 Recommended Controllers The following controllers are available from MICRONIX USA for piezo stages: MMC-100 MMC Technical Data Motor Speed Max. (mm/sec) Resolution Typical (nm) Bi-directional Repeatability (nm) Uni-directional Repeatability (nm) Accuracy (µm) PM (MMC-100), 10(MMC-110) <1 (open loop), 2 (digital encoder), 10 (analog encoder) N/A (open loop), ± 20 (digital encoder), ±50 (analog encoder) N/A (open loop), 20 (digital encoder), 50 (analog encoder) +/- 3 (+/- 1 on request) 1.4 Load Characteristics Load Characteristics Fx(N) Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) PM
6 2. 1BModel Configurations BPPS-20 Order Numbers Order No. PPS Piezo Motor PM mm Travel 1 18mm Travel 2 26mm Travel 3 51mm Travel 5 Open Loop 0 Analog (1Vpp), 10nm 2 Digital Encoder, 2nm 3 No Limit Switch 0 Non-vacuum 0 Vacuum prepared, 10-6 mbar 6 Vacuum prepared, 10-9 mbar 9 Contact MICRONIX USA for custom applications and stacking configurations. 4
7 3. 2BPreparing to Install the PPS BInstallation Preparation When mounting the stage it is important to consider the flatness of the mounting surface, as the stage will conform to the shape of that mounting surface. A surface that is not flat can adversely affect the performance and structural integrity of the stage. The stage is calibrated and guaranteed to be within specification at 20 C ±5 C unless otherwise specified. Be sure to use the stage under the following conditions: Mount to a clean and flat surface which is free of debris, burrs or dings An indoor atmosphere free of corrosive gases, excessive dust, and condensation Temperature range of 0-40 C Relative humidity between 20-80% Locate away from water, heat, and electrical noise BPackage Contents If product is damaged or there are missing components, contact MICRONIX USA immediately. Do not discard product packaging in case of return shipment. Package Should Contain: PPS-20 Linear Stage Any other previously agreed upon components such as a controller 5
8 4. 3BInstalling the PPS-20 All mounting patterns require M2 screws for mounting and M1.5 x 5mm dowel pins for precision alignment. Additional brackets and screws may be needed for custom applications BPPS-20 Installation BGeneral Mounting For general mounting configurations, mount the base to the mounting surface. Align carriage with clearance holes to access base mounting pattern. (Please note, it is possible to move the carriage manually without damaging the stage) Optional Side Mounting screws Customer Supplied Base Plate or Mounting Surface Optional Ear Mount Screws Clearance Hole Requires: 2x M1.5 x 5mm Dowel Pins 2x M2 x 5mm Socket Head Cap Screws (optional) 2x M2 x 5mm Socket Head Cap Screw for ear mounts Direction of Travel 2. Align carriage with a clearance hole and install an M2 Socket Head Cap Screw 1. Align carriage with remaining clearance hole and install second M2 Socket Head Cap Screw Travel A B 12mm mm mm mm
9 BX-Y Mounting Direction of Travel For X-Y mounting, follow the instructions for mounting the X-axis stage, outlined in section General Mounting, then proceed to mount the Y-axis stage, as shown below(please note, It is possible to move the carriage manually without damaging the stage): Requires: 2x M1.5 x 4mm Dowel Pins 4x M2 x 4mm Socket Head Cap Screws Y-Axis Stage 1. Align Y- Axis Stage Carriage with Clearance Hole. Install M2 Socket Head Cap Screw Note: For stages assembled in an XY configuration in factory do not require disassembly for base mounting 5. 4BConnecting the PPS Align Carriage with remaining clearance hole and install second M2 Socket Head Cap Screw BAtmospheric Environments For controller information refer to the appropriate MMC controller manual BOpen Loop Installation & Wiring Diagram Connecting the PPS-20 in an open loop configuration only requires that the D- sub 9 Pin male Motor Cable be connected to a compatible controller. No other cables or components are needed. 7
10 BClosed Loop/Encoder Installation & Wiring Diagram Using the PPS-20 stage with an encoder requires a closed loop compatible controller (MMC-100 or MMC-110) that recognizes encoder feedback. Connect the stage as shown below Analog Encoder Wiring Diagram Digital Encoder Wiring Diagram For a PPS-20 with a digital encoder, connect the stage as shown below using the supplied 15 to 9 pin cable to connect the Encoder Module to the Controller. 8
11 5.2 18BVacuum Environments BHandling and Preparation When preparing the stage for vacuum environments, take the necessary precautions (such as wearing gloves, clean room clothing, etc.) when handling the stage as to avoid any contaminants. Maximum Bake-out temperature is 100 C. MICRONIX USA supplies the stage with vacuum compatible connectors: 9-pin female PEEK connectors for open loop, 15-Pin female PEEK connector for closed loop with analog encoder, 25-pin female PEEK connector for closed loop with digital encoder BOpen loop Installation & Wiring Diagram Connecting an open loop PPS-20 in a vacuum chamber requires the use of a feed through connector at the vacuum chamber wall. The vacuum compatible PPS-20 will be supplied with wiring for a straight through feed through not a cross over gender changer. MICRONIX USA supplies test connectors that simulate the vacuum feed through to allow functionality test prior to installation in a vacuum chamber. For details regarding the pin-out and feed through specifications see the Appendix A BClosed Loop/Encoder Installation & Wiring Diagram Closed loop installation of the PPS-20 stage in vacuum environments requires an intermediate feed through connector at the vacuum chamber wall that can accommodate both the motor cable, and the encoder cable. The vacuum compatible PPS-20 will be supplied with wiring for a straight through feed through not a cross over gender bender. MICRONIX USA supplies test connectors that simulate the vacuum feed through to allow functionality test prior to installation in a vacuum chamber. For details regarding the pin-out and feed through specifications see the Appendix A.4.5, A
12 Analog Encoder Wiring Diagram Digital Encoder Wiring Diagram 10
13 6. 5BDimensions BPPS-20 with Digital Encoder L Travel A B C D E 20 12mm mm mm mm * Grey parts for external closed loop only 11
14 6.2 20BPPS-20 with Analog Encoder 7. L Travel A B C D E 20 12mm mm mm mm * Grey parts for external closed loop only 12
15 6BStacking Configurations 7.1 Configurations Examples (Additional Configurations available upon request) X-Y X-Y No carriage X-Y Back to back X-Y 18mm-12mm X-Y 18mm (no carriage) -12mm X-Y PPS-28 X-Y (back to back) 38mm (X-Axis) 26mm (Y-Axis) Using Z-Adapter (P/N: ) X-Y-Z X-Y-Z PPS-20 XYZ X-38mm, Y-18mm, Z-26mm 13
16 8. 7BSupplementary Information BMaintenance The PPS-20 series of linear piezo stages utilizes a maintenance free design. Do not modify the stage or perform any maintenance unless specifically instructed to do so by MICRONIX USA personal. If the stage is not performing up to the original specifications, please contact MICRONIX USA. The PPS-20 linear piezo stage is a precision mechanical device and should be handled with care. Do not drop or mishandle the stage. Do not touch the bearings, as this will contaminate the lubrication and jeopardize the longevity of the stage. Follow the Installation Preparation requirements and use proper cable management to ensure a clean and safe operating environment BUnits and Conventions All measurements in this document are in the metric system of units. Metric Unit English Unit 1 millimeter inches 1 micron inches 1 Newton lbs 1 Newton-meter 8.85 in-lbs 14
17 A. 8BAppendix A.1 DB-9 Standard Male Motor Connector Pin Description Color 1 Phase 1 Red 2 Phase 2 Yellow 3 N/C N/C 4 Not In Use N/C 5 Ground Black& Green 6 N/C N/C 7 N/C N/C 8 N/C N/C 9 Ground N/C A.2 24B2 Phase Piezo Motor Wiring Diagram 15
18 A.3 25BOpen Loop Vacuum Wiring Diagram A BStraight Through 9-Pin Feed Through 16
19 A.4 26BUsing the Digital Encoder Module When using the digital external encoder configuration, the Encoder Module should display two green LED s indicating a power source and proper encoder alignment. A Red or Yellow Signal Level LED indicates misalignment of the Encoder Head, if this occurs contact MICRONIX USA. Do not adjust the Encoder Head or scale. For more information refer to MicroE Systems Mercury Encoders. A BEncoder Module Pin-out Pin Description Pin Description 1 *Right Limit+ 9 Ground 2 Ground 10 *Left Limit+ 3 *Right Limit- 11 *Left Limit- 4 Index- 12 Index+ 5 B- 13 B+ 6 A- 14 A+ 7 +5V 15 (not used) 8 +5V *-Limits must be specified at the time of order, and calibrated at the factory. Note: Tri-state alarm: A and B are tri-stated if the encoder signal becomes too low for reliable operation. 17
20 A BOperating and Electrical Specifications Power Supply 5VDC 140mA (No outputs 180mA (A, B, I, and both limits terminated); 50mA at the sensor Operating Temperature 0 to 70 C Humidity 10-90% RH non-condensing A BOutput Signals & Signal Termination for A quad B, Index and limits *Output signals are differential. Inverse signals are not shown for clarity. **Note: At some interpolations values the index pulse may be aligned with other states of A or B than the ones shown. ***Above are with reference to the sensor s optical centerline A BResolution All closed loop stages are supplied with 20µm scales. The digital encoder module interpolates to a higher resolution as specified in the order. With a digital encoder the MMC-100 has an achievable resolution of 2nm. 18
21 A.4.5 Digital Encoder Wiring Diagram Standard Cable Descriptions: A. PPS-20 Motor Cable - Vacuum Side (Female Dsub 25 Pin Peek Connector, 1.5m, Silver Braided Cable) B. PPS-20 Encoder Cable - Vacuum Side (Female Dsub 25 Pin Peek Connector, 1.5m, Silver Braided Cable) C. Encoder Module Breakout Cable (Female Dsub 25 Pin to MII 6000 Interpolator Module, 1m, Black Cable) D. Motor Breakout Cable (Female Dsub 25 Pin to Male Dsub 9 Pin, 1.5m, W hite Cable) E. Encoder Module Adapter Cable (Female Dsub 15 Pin to Female Dsub 9 Pin,.5m, White Cable) Wiring Diagram: A C E D J5 J6 B J1 J2 J3 J4 Description: Color J1 J2 J3 Color J4 J7 Phase 1 Red Red 13 1 Phase 2 Yellow W hite (Green TP) 12 2 Ground Black/Green Black/Green 25 5 Shield Casing + 5VDC Red Red 10 GND Black Black 22 DCLK - Gray Gray 9 DCLK + W hite ( Gray TP) W hite ( Gray TP) 21 M I SO - Violet Violet 8 M ISO + W hite ( Violet TP) W hite ( Violet TP) 20 M OSI - Blue Blue 7 M OSI + W hit e ( Blue TP) W hit e ( Blue TP) 19 nss - Green Green 6 nss + W hite (Green TP) W hite (Green TP) 18 CLK - Brown Brown 5 CLK + W hite (Brown TP) W hite (Brown TP) 17 Shield NC Female PEEK Dsub25 Connector - Rear View J7 J8 Description: J5 Color J6 J8 I ndex - 4 W hit e ( Purple TP) 4 8 B - 5 W hit e ( Yellow TP)5 7 A - 6 W hite (Brown TP) VDC 7 Red 7 5 Ground 2 Black 2 4 I ndex + 12 Purple 12 3 B + 13 Yellow 13 2 A + 14 Brow n Female Dsub9 Connector - Rear View Male Dsub9 Connector - Rear View A BStraight Through 25-Pin Feed Through 19
22 A.5 27BUsing an Analog Encoder A BAnalog Encoder Overview A PPS-20 with Analog encoder will need to be paired with an appropriate controller. The MMC-100 has an Analog option. The PPS-20 with an analog encoder will be supplied with a 15 pin connector that incorporates both motor and encoder signals. A BEncoder Pin-out Pin Color Description 1 Brown Cos+ 2 Yellow Sin+ 3 Violet Index + 4 Black Ground 5 Red +5V 6 Orange Cos- 7 Green Sin- 8 Blue Index - 9 Not in Use Not In Use A.5.3 Operating and Electrical Specifications Power Supply 5VDC 330mA (60mA for sensor) Operating Temperature 0 to 70 C Humidity 10-90% RH non-condensing A.5.4 Analog Output (Pins 1,2,6, and 7) A.5.5 Index Window (Pins 3) 20
23 A BResolution All closed loop stages are supplied with 20µm scales. The interpolation is done in the MMC-100 to a higher resolution as specified in the order. With an analog encoder the MMC-100 has an achievable resolution of 10nm. A.5.7 Analog Encoder Wiring Diagram Cable Descriptions: A. PPS-20 Encoder Cable - Vacuum Side (Female Dsub 15 Pin Peek Connector, 1.5m, Silver Braided Copper Cable) B. PPS-20 Motor Cable - Vacuum Side (Female Dsub 15 Pin Peek Connector, 1.5m, Silver Braided Copper Cable) C. Encoder Cable (Female Dsub 15 Pin to Female Dsub 9 Pin, 1.5m, White Teflon Cable) D. Motor Cable (Female Dsub 15 Pin to Male Dsub 9 Pin, 1.5m, W hite Teflon Cable) Wiring Diagram: A C B J1 J2 J3 J4 D J5 J6 Description: Color J1 J2 J3 Color J4 J5 J6 Phase 1 Red Red 8 1 Phase 2 Yellow W hite (Green TP) 7 2 Ground Black/Green Black/Green 15 5 Shield Casing GND Black Black 1 4 Cos+ Brow n Brow n V Red Red 3 5 Cos- Orange W hite (Brown TP) 4 6 Sin+ Yellow Yellow 5 2 Sin- Green W hite ( Yellow TP)12 7 Index- Blue Violet ( W hite TP) 11 8 I ndex+ Violet Violet 10 3 Shield Casing Female PEEK Dsub15 Connector - Rear View A BStraight Through 15-Pin Feed Through 21
PPS-28. Precision Piezo Stage Reference Manual. S e r i e s. (Open and Closed Loop Versions)
PPS-28 S e r i e s Precision Piezo Stage (Open and Closed Loop Versions) PPS-28 Piezo Positioner Stage Rev 3.02 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538
More informationPR-32. Piezo Rotation Stage Reference Manual. S e r i e s. (Open and Closed Loop Versions)
PR-32 S e r i e s Piezo Rotation Stage (Open and Closed Loop Versions) PR-32 Piezo Rotation Stage Rev 3.00 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538
More informationPrecision Piezo Stage Reference Manual (Open and Closed Loop Versions)
PPX-32 Series Precision Piezo Stage (Open and Closed Loop Versions) PPX-32 Piezo Positioner Stage Rev 3.02 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538
More informationVT-50. Linear Positioning Stage Reference Manual. S e r i e s. (Open and Closed Loop Versions)
VT-50 S e r i e s Linear Positioning Stage (Open and Closed Loop Versions) VT-50L Linear Stage Rev 1.03 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538
More informationLinear Positioning Stage Reference Manual
PP-30 Series Linear Positioning Stage PP-30 Piezo Positioner Stage Rev 3.00 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538 Email: info@micronixusa.com
More informationPPS-60. Precision Positioner Stage Reference Manual. S e r i e s. (Open and Closed Loop Versions)
PPS-60 S e r i e s Precision Positioner Stage (Open and Closed Loop Versions) PPS-60 Precision Positioner Stage Rev 1.04 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538
More informationLinear Actuator Reference Manual
MP-21 S e r i e s Linear Actuator MP-21 Linear Actuator Rev 3.04 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538 Email: info@micronixusa.com http://micronixusa.com
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationPXL33 with 25, 60 and 110 mm travel
Linear Stages with 25, 60 and 110 mm travel Features < 2nm incremental motion possible Resolutions to 10nm and 1Vpp available Small footprint, low profile Travel to 110mm Linear motor Linear encoder Limit
More informationMPS50SL Miniature Mechanical-Bearing Screw-Driven Linear Stage
MPSSL Miniature Mechanical-Bearing Screw-Driven Linear Stage Compact mm width, with travel to mm Precision ground ball-screw or lead-screw drive DC servo or stepper motor Crossed-roller bearings High resolution
More informationMTE Series Encoders. Performance and Value Compact Linear Encoder. Specifications. Benefits
Specifications Resolution 5µm, 2.5µm, 1µm Linearity Outputs Tape Scale: ±10µm over 1m A-quad-B, Index Window, Alarm Scale Pitch 20µm Benefits Compact Footprint Miniature sensor Compact tape scale Energy
More informationPerformance and Value Optical Encoder System. Specifications. Benefits
Specifications Resolution Linearity Accuracy Cyclical Error Outputs Linear: 1µm, 0.5µm, 0.1µm, or 50nm Rotary: 163k to 3.27M CPR Tape Scale: ±5µm over 1m Linear Glass Scale: ±3µm over 1m Rotary Glass Scale:
More informationLHM-E Product User's Manual Firmware 5.00 and up. Last Update: September Visit for more recent updates.
LHM-E Product User's Manual Firmware 5.00 and up Last Update: September 15 2017 Visit www.zaber.com/wiki for more recent updates. Zaber Technologies Inc. #2-605 West Kent Ave. N. Vancouver, British Columbia
More informationMX80S Ballscrew and Leadscrew Driven Stages
Miniature MX80S Features MX80S Ballscrew and Leadscrew Driven Stages Features Miniature Size - Low Profile (35 mm high X 80 mm wide) Normal or cleanroom environments 25, 50,, 150 mm travels Multi-axis
More informationSENC 150 REFERENCE MANUAL
SENC 50 REFERENCE MANUAL SENC 50 Table of Contents / Warnings Page Introduction / Supplied items... 4 2 Preparing the mounting / Mounting information... 5 3 Encoder dimensions... 8 4 Backup spar dimensions...
More informationRS-232 Industrial Media Converter
USER GUIDE The leader in rugged fiber optic technology. U-151 2018C-0327 Industrial Media Converter COMPACT, RUGGED & TEMPERATURE HARDENED Introduction This Industrial Serial Data media converter transports
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODELS: WP-110, XGA Line Transmitter. PT-120, XGA Line Receiver. TP-120, XGA Line Receiver. P/N: Rev 1
KRAMER ELECTRONICS LTD. USER MANUAL MODELS: WP-110, XGA Line Transmitter PT-120, XGA Line Receiver TP-120, XGA Line Receiver P/N: 2900-300180 Rev 1 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving
More informationCutter Option Installation Instructions
This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding
More informationMX Voice Gateway Series. Installation Manual
MX Voice Gateway Series Installation Manual Revision Record Revision version 1.0 (2009-05-07 Author:ZNH) The first revision. Shanghai New Rock Technologies, Inc. Page 2/23 Contents 1 Installation Preparation...
More informationPLG160 Linear Stage PLG mm Travel PLG160 s. NEMA23 In-Line. Frameless Motor
200mm Travel s NEMA23 In-Line Frameless Motor Features Travel to 600mm Loads up to 50kg Precision Ballscrew Drive Integrated Frameless Servo Motor or NEMA23 Motor Mount Internal Linear or Rotary encoder,
More informationRS-232 Fiber Link Card System
USER GUIDE The leader in rugged fiber optic technology. U-152 2018B-0406 Fiber Link Card System SYSTEM INSTALLATION INFORMATION Introduction The Fiber Link Card system transports a full 9-Pin copper signal
More informationPCL40. PCL40 Linear Stage. PCL40 with 400 mm travel
PCL4 Linear Stage PCL4 PCL4 with 4 mm travel Features Travel to 4mm Optional rotary encoder resolution to 1. micron 1 kg payload capacity Two motor options Limit sensors 4mm tall single axis, 8mm tall
More informationPLG110 Linear Stage PLG mm Travel PLG110 s. Frameless Motor With Ballscrew Linear Motor
100mm Travel s Frameless Motor With Ballscrew Linear Motor Features Travel to 600mm Loads up to 25kg Precision Ballscrew Drive or Linear Motor Drive Integrated Frameless Servo Motor or NEMA23 Motor Mount
More informationStepper Systems. Chapter Four. Features Machine Specifications And Bid Proposals. Catalog Numbers
Stepper Systems Features Machine Specifications And Bid Proposals Chapter Four Stepper 11x13: Stepper 21x19: Stepper 21x29: Stepper 21x39: Stepper 31x33: Stepper 49x41: Catalog Numbers HX33SBME01201505
More informationPLG210 Linear Stage PLG210. XYT stack of PLG160 and PLG210 Frameless Motor Stages on PLR350. XY stack of PLG210x300mm with in-line motor mount
Linear Stage XYT stack of PLG160 and Frameless Motor Stages on PLR350 XY stack of x300mm with in-line motor mount Features Travel to 600mm Loads up to 100kg Precision Ballscrew Drive Integrated Frameless
More informationDelivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationVE-53 Sensor Uniaxial / Triaxial Surface and Downhole Velocity Sensor. Operation Manual
VE-53 Sensor Uniaxial / Triaxial Surface and Downhole Velocity Sensor Operation Manual Company: Author: Checked: Approved: Level: Distribution: GeoSIG Ltd Wiesenstrasse 39, 8952 Schlieren, Switzerland,
More informationProduct Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
More informationLX80L Linear Motor Tables
LX80L Series LX80L Linear Motor Tables Features Velocity to 3 m/sec Acceleration to 5 g s Encoder resolution to 0.1 micron Cleanroom compatible Easy multi-axis mounting Internal cable management Introduction
More information4.8 Expansion Module MAC00-FS1/FS4
.8 Expansion Module MAC00-FS/FS MAC00-FS With M connectors MAC00-FS With D sub connectors TT08GB.8. High speed serial RS8 module MAC00-FS and FS Introduction The MAC00-FS and FS are used for high speed
More informationMPS75SL. Miniature Mechanical-Bearing Screw-Driven Linear Stage. Compact 75 mm width, with travel to 100 mm. Precision ground ball-screw drive
MPSSL Miniature Mechanical-Bearing Screw-Driven Linear Stage Compact mm width, with travel to 0 mm Precision ground ball-screw drive DC servo or stepper motor nti-creep crossed-roller bearings High resolution
More informationProduct Description. Simplifying Motion Control
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel 10 kg load capacity Up to 100 mm/s speed and up to 35 N thrust Built-in controller; daisy-chains with other Zaber products Only 4 feedthrough
More informationENC 125 T/E REFERENCE MANUAL. Acu-Rite Companies Inc.
ENC 125 T/E REFERENCE MANUAL Acu-Rite Companies Inc. ENC 125 T/E Page Introduction... 2 Mounting Preparation... 3 Mounting Information... 4 Encoder Dimensions - ENC 125 T (top mount)... 5 Encoder Dimensions
More informationPSW-002. Fiber Optic Polarization Switch. User Guide
PSW-002 Fiber Optic Polarization Switch User Guide Version: 1.1 Date: June 30, 2015 General Photonics Corporation is located in Chino California. For more information visit the company's website at: www.generalphotonics.com
More informationComponent identification
IO-ATC8 I/O Expansion Module 8 Analog/Thermocouple Inputs The IO-ATC8 is an I/O Expansion Module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 8 inputs that
More informationSUM-40 OPERATING MANUAL. Ma0 DYNAMIC STRUCTURES AND MATERIALS, LLC REV
Ma0 SUM-40 OPERATING MANUAL DYNAMIC STRUCTURES AND MATERIALS, LLC REV. 171011 Please review the following points for both personal and equipment safety while operating the SUM-40 motor. HIGH ENERGY/VOLTAGE
More informationInstallation Sensing distance Connection Output configuration Operation mode NO Operation mode NC
Standard (thin shape) Inductive Proximity Sensor Thin shape for space saving surface mounting Direct side wall mounting for bracket-less installation Ordering Information DC 3-wire Models Installation
More informationCBM-105 Connections. Male Connector on Card WAGO # Male Connector on Card WAGO #
CN1 2 PIN connector for Power CBM-105 Connections Male Connector on Card WAGO #734-162 Female Connector for Wiring WAGO #734-102 PN:1104417 & 18 PIN Description 1 +24VDC +/-10% (full-wave rectified, smoothed
More informationV8-80HS-1 SERIES OF HIGH-SPEED MOTORIZED ZOOM LENSES
X684 V8-80HS-1 SERIES OF HIGH-SPEED MOTORIZED ZOOM LENSES Copyright 2000 Vicon Industries Inc. All rights reserved. Product specifications subject to change without notice. Vicon and its logo are registered
More informationUSER MANUAL. Kramer Electronics, Ltd. Models:
Kramer Electronics, Ltd. USER MANUAL Models: PT-110, XGA Line Transmitter WP-110, XGA Line Transmitter PT-120, XGA Line Receiver TP-120, XGA Line Receiver Contents Contents 1 Introduction 1 2 Getting Started
More informationGV-EL124S Electric Strike
GV-EL124S Electric Strike Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but it is field convertible from fail secure to fail safe. It can be mounted either
More informationSDG1400 User s Guide
SDG1400 User s Guide Model SDG1400 Rate Sensor Systron Donner Inertial Sales and Customer Service Phone: +1 925.979. 4500 Fax: +1 925.349.1366 E-Mail: sales@systron.com www.systron.com SDG1400 User s Guide
More information3-Card Slot, Includes P1/P2/P3/P4 compatibility for Analog I/O, Digital I/O, & Pulse/Frequency
DBK213 Screw-Terminal & Expansion Card Module 3-Card Slot, Includes P1/P2/P3/P4 compatibility for Analog I/O, Digital I/O, & Pulse/Frequency Overview 1 Connection Tips 2 Installing DBK Cards 3 System Examples
More informationUser Manual Version: Date:
User Manual VT-80 Translation Stage 1 Order no. 6230-9- DC-B-026 1 2Phase-041 2 25 mm (xy mounted at PI micos) 1 50 mm 2 75 mm 3 100 mm 4 150 mm 5 200 mm 6 300 mm 8 VT-80 Translation Stage Order no. 6230-9-
More informationMobileView Junction Box
Installation Instructions MobileView Junction Box (Catalog Number 2727-MRJB2) English The MobileView Junction Box (2727-MRJB2) integrates the following terminals into the control system: MobileView Guard
More informationKramer Electronics, Ltd.
Kramer Electronics, Ltd. Preliminary USER MANUAL Model: FC-50 RS-232 Range Extender Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 3.1 About the Power Connect Feature
More informationACORN User Guide For Revision (Aka Acorn_rev3) Updated 1/23/17
ACORN User Guide For Revision 171025 (Aka Acorn_rev3) Updated 1/23/17 Overview ACORN is technically a breakout board for the BeagleBone Green or BeagleBone Black embedded computer. The remainder of this
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationIncludes P1/P2/P3/P4 compatibility for Analog I/O, Digital I/O, & Pulse/Frequency
DBK214 16-Connector BNC Interface Module Includes P1/P2/P3/P4 compatibility for Analog I/O, Digital I/O, & Pulse/Frequency Overview 1 Block Diagram 2 Connection Tips 3 System Examples 4 Using the Screw-Terminal
More information1500V - Vacuum Rated
Preliminary 8/20/2008 Mercury Digital Output Encoder System Installation Manual and Reference Guide 1500V - Vacuum Rated Customer Controller Vacuum Wall Manual No. IM-M1500V Rev S7 Introduction MicroE
More informationProduct Discontinuation Notices. Discontinuation Notice of Safety Laser Scanner Type OS3101 series
PRODUCT NEWS Product Discontinuation Notices July 4, 2011 Presence Detection Sensors No. 2011195E Discontinuation Notice of Safety Laser Scanner Product Discontinuation Safety laser scanner Accessories
More informationKramer Electronics, Ltd. USER MANUAL. Model: TP Channel UXGA/Audio/RS-232 to CAT 5 Transmitter
Kramer Electronics, Ltd. USER MANUAL Model: TP-185 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 3.1 Shielded Twisted
More information3-position, AC100/200V controller for RCP2/RCP3 Series. 3 position, AC100V controller for RCA/RCA2/RCL Series. Controller. Power supply.
/ AMECController -position, AC0/00V controller for RCP/RCP Series position, AC0V controller for RCA/RCA/RCL Series /Flat Cylinder -position controller MEC (Mechanical Engineer Control) Feature Rotary Servo
More information9 Maintenance and Repair
Agilent 1200 Infinity II Series RID User Manual 9 Maintenance and Repair Introduction to Maintenance 120 Warnings and Cautions 121 Overview of Maintenance 123 Cleaning the Module 124 Storage of the Detector
More informationAC-43 Accelerometer. User Manual
AC-43 Accelerometer Manual Page 1 AC-43 Accelerometer User Manual Company: Author: Checked: Approved: Distribution: GeoSIG Ltd Wiesenstrasse 39, 8952 Schlieren, Switzerland, Tel: +41 44 810 21 50, Fax:
More informationMaterial: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
More informationCompact Magnetic Non-contact Safety Switches. Model Number Structure
Compact Non-contact Safety Switches FS-TGR-N@C Coded Non-contact switches are designed to interlock hinge, sliding or removal guard doors. All coded Non-contact switches have a LED for easy diagnosis.
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationMLC 420. MAGNETIC Press Brake ENCODERS OPERATION MANUAL
MLC 420 MAGNETIC Press Brake ENCODERS NON-CONTACT INTEGRATED BEARING SYSTEM USER SELECTABLE REFERENCE POSITION LEFT OR RIGHT MOUNTING HIGH RESOLUTION FROM 0.005mm HIGH PROTECTİON AGAİNST VIBRATION IP67
More informationGSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
More informationData Sheet. Model ER position sensor, features a versatile rod-and-cylinder design with optional dual rod ends. Interrogation Return wire.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model ER Analog / Digital-Pulse (Start/Stop) Output SENSORS Document Part Number 550996 Revision D Data Sheet Model
More informationSERIES M813XX. PC/AT-COMPATIBLE KEYBOARDS Panel Mount
ORIGINATOR NAME FRANKLIN TU DATE 4/20/11 7 MORGAN, IRVINE, CA 92618 PHONE: (877) 782-2648 FAX: (949) 297-8703 SERIES M813XX PC/AT-COMPATIBLE KEYBOARDS Panel Mount Laser Engraved Legends on Plastic Keycaps
More informationPlug-in unit extension block One sensor extension block allows four plug-in units to be added. Power cable for sensors. Snap-connector inputs
1 Sensor Block for SC Quick connection of 16 sensors Set of 16 inputs directly hooked up to PLC Up to 16 sensors can be connected on one main block followed by three extension blocks (or one snapconnector
More informationUSER MANUAL. RC-54DL KNET Auxiliary Control Panel MODEL: P/N: Rev 2
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: RC-54DL KNET Auxiliary Control Panel P/N: 2900-300130 Rev 2 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 3.1
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationAbout this Document 2 Symbols and Typographic Conventions... 2 Figures... 2 Downloading Manuals... 2
N-310 NEXACT OEM Miniature Linear Drive Contents About this Document 2 Symbols and Typographic Conventions... 2 Figures... 2 Downloading Manuals... 2 Safety 4 Intended Use... 4 Safety Precautions... 4
More informationHall-Effect Paddle Joystick
Hall-Effect Paddle Joystick Robust design for arduous applications Return-to-center or return-to-end options Under-panel depth minimized to 9mm Rated for 5 million cycles Hall-effect sensor technology
More informationPower Over Fiber USER GUIDE. SYSTEM INSTALLATION INFORMATION Description. The leader in rugged fiber optic technology. RLH Industries, Inc.
USER GUIDE RLH Industries, Inc. The leader in rugged fiber optic technology. U-145 2018A-0119 Power Over Fiber SYSTEM INSTALLATI INFORMATI Description Our patented Power Over Fiber (PoF) system provides
More informationUSER MANUAL. 621T DVI Optical Transmitter. 621R DVI Optical Receiver MODEL: P/N: Rev 8
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: 621T DVI Optical Transmitter 621R DVI Optical Receiver P/N: 2900-000103 Rev 8 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance
More informationConnecting MicroE Optira Series Encoder to AMC DigiFlex Servo Drive
TECHNICAL NOTES: INTERFACING WITH DRIVES Connecting MicroE Optira Series Encoder to AMC DigiFlex Servo Drive TN-1304 REV 151214 1 Introduction... 3 2 Required items... 4 2.1 Optira... 4 2.2 Optira Development
More informationCompact Magnetic Non-contact Safety Switches. Model Number Structure
Compact Non-contact Safety Switches Coded Non-contact switches are designed to interlock hinge, sliding or removal guard doors. All coded Non-contact switches have a LED for easy diagnosis. Coded actuator
More informationRevision A 03/31/2017 GRTAvionics.com. Serial Combiner/Expander
Quad Serial data Combiner/Expander Revision A 03/31/2017 GRTAvionics.com 1 Table of Contents Revision History...3 Description...4 Compatibility...4 Use with Non-Compatible GRT and other systems...4 Serial
More informationMini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
More informationUltra Low Noise Laser 1550nm
Ultra Low Noise Laser 1550nm User Manual Version 1.01 Last Updated 07/13/17 www.apichip.com T: 310 642-7975 F: 310 642-7829 Page 1 of 10 Revision Table Revision Description 1.0 Initial release 1.01 Cable
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODEL: 622T Dual Link DVI Optical Transmitter. 622R Dual Link DVI Optical Receiver. P/N: Rev 4
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: 622T Dual Link DVI Optical Transmitter 622R Dual Link DVI Optical Receiver P/N: 2900-000104 Rev 4 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving
More informationT E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
More informationThe sensor fulfills the specifications of the EMC requirements, if the instructions in the manual are followed.
Assembly Instructions scancontrol 2600/2650/2900/2950 1. Warnings Connect the power supply and the display-/output device in accordance with the safety regulations for electrical equipment. The power supply
More informationPhotoelectric Sensor
Sensing Supply Voltage Output 3m 1.cm,2m 10cm 2 to 20 VAC, 0/60 Hz to200ma, 20 VAC 100 ma, 2 VDC Photoelectric Sensor Threaded Cylindrical M1 Size Sensors with Built-in Amplifier Chemical resistant, ABS
More informationPressure sensors SDE3, with display
Pressure sensors SDE3 Key features At a glance SDE3- -M plug version, plug M8x1 and M12x1 SDE3- -FQ, cable with plug Fast H-rail, wall or surface mounting Fast front panel mounting High-contrast, two-colour
More informationFVT/FVR20D2I1C4E INSTALLATION AND OPERATION MANUAL
2-CHANNEL 10-BIT DIGITALLY ENCODED VIDEO + 2 BI-DIRECTIONAL DATA + AIPHONE INTERCOM + 4 CONTACT CLOSURE + 100MB ETHERNET + REDUNDANT POINT-TO-POINT DUAL SFP OPTICAL PORTS The series utilize 10-bit digital
More informationFeatures. 400LXR Series Linear Motor Tables. 400LXR Series
400LXR Series Linear Motor Tables Features Velocity to 4.5 m/sec Acceleration to 5 Gs Encoder resolution to 0.1 micron Cleanroom compatible Easy multi-axis mounting Cable management system Proven strip
More information4.7 Expansion Module MAC00-FS1/FS4
MAC00-FS4 With M12 connectors MAC00-FS1 With D sub connectors TT1068GB 4.7.1 High speed serial RS485 module MAC00-FS1 and FS4 Introduction The MAC00-FS1 and FS4 are used for high speed RS485 communication
More informationOrdering Information. Smart Sensors (Inductive Displacement Type) ZX Series. Sensors
Smart Sensors (Inductive Displacement Type) ZX Series Smart Sensors that use the eddy current method are now available. Develop new applications with sub-micron sensing technology.. Ordering Information
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationNearus USB2.0 Camera Manual NU-350-USB2PTZ-B
Nearus USB2.0 Camera Manual NU-350-USB2PTZ-B Safety Tips Please read this manual carefully before installing the camera. Keep the camera away from violent vibration, physical stress, moisture, extreme
More informationAbsolute Rotary Encoder E6C-N. Ordering Information. Ideal for Stepping Motor Tripping Detection and Position Control of Loaders or Unloaders
Absolute Rotary Encoder Ideal for Stepping Motor Tripping Detection and Position Control of Loaders or Unloaders No need to reset origin point at power-up IP50 certification Ideal for packaging, plastics,
More informationNT PRESSURE TRANSDUCER MODELS 4100, 4210, 4130, 4230
P/N 0-027289 (Rev. A 04/4) NT PRESSURE TRANSDUCER MODELS 400, 420, 430, 4230 User Guide Table of Contents Safety Alert Symbol... 2 Introduction... 3 Installation... 3 Mechanical Installation... 3 Electrical
More informationContents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000307 MLC500T30-750 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
More informationThe Butterfly LaserMount also offers all the features you would expect from a modern butterfly laser diode fixture, including:
Page 2 202/204 Butterfly LaserMount User s Manual Introduction Thank you for choosing the Butterfly LaserMount from Arroyo Instruments. The Butterfly LaserMount is designed for high performance and long
More informationDPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
More informationE2Q4 Square Proximity Sensor
Inductive Square Slim, compact size M2 Plug-in connection Integrated short circuit and reverse polarity protection Active face positioning: Y-axis 5, X-axis 90 incremets Ordering Information DC type Connection
More informationEC07 EC63. Compatible actuators: ERL2 ESD2. How to order EC 07 B. Series. B Installation. method
Controller EC07 EC63 Compatible actuators: ERL ESD Features Compact, light weight and thin (Body width 35mm) Can be set without manual Perfect installation compatibility with actuator PC software available
More information2 Channel POTS DIN Fiber Link System
USER GUIDE The leader in rugged fiber optic technology. U-8 07A-040 Channel POTS DIN Fiber Link System SYSTEM INSTALLATION INFORMATION The RLH Channel Plain Old Telephone Service (POTS) DIN Fiber Link
More information4 Channel 4~20mA/0~10VDC Analog Data Fiber Link System
USER GUIDE RLH Industries, Inc. The leader in rugged fiber optic technology. U-022 2017A-0330 4 Channel 4~20mA/0~10VDC Analog Data Fiber Link System SYSTEM INSTALLATION INFORMATION Description The 4 Channel
More informationHITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions
HITACHI EH-150 series PLC Resistance Temperature Detective input module Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction
More informationQUICK START GUIDE. 2.4 Inch TFT Terminal Time Attendance & Access Control
QUICK START GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control Safety Precautions The following precautions are to keep user safe and prevent any damage. Please read carefully before installation.
More informationModel Number: 4212-PK-045Sensor Connections* SHIELD Silver/clear wire DEBRIS MEASURE RED DEBRIS REF BLUE OIL SIGNAL GREEN OIL REF WHITE TEMP ORANGE PROBE GND BLACK Wire 26 AWG PTFE 3G210 screened with
More informationPiezo LEGS. Linear 6N
Linear 6N Direct drive backlash free Nanometer resolution Simple drive electronics No power draw in hold position Quick response and high speed dynamics The LL10 linear motor is intended for a large range
More information