Upgrading CDU Firmware to handle Canadian Polymer Notes using PC Loader Utility
|
|
- Hope Owen
- 5 years ago
- Views:
Transcription
1 Upgrading CDU Firmware to handle Canadian Polymer Notes using PC Loader Utility May 16, 2013 Corporate Headquarters: B St. Long Beach, MS Phone: (800) Fax: (228) Copyright Notice 2013 Triton. All Rights Reserved. TRITON logo is a registered trademark of Triton Systems of Delaware LLC.
2 DOCUMENT UPDATES May 16, 2013 Original
3 Preparing Computer for Comloc Installation Before starting, review the ATM configuration summary. If the dispenser firmware version is , the unit has already been updated, do not continue. If the summary states any other firmware, continue with the SCDU loader. IMPORTANT: Before installing the comloc driver, ensure the comloc hardware is NOT connected to the computer. Windows 7 & 8 users ONLY: Ensure the.net framework is enabled on your computer before continuing. (Start Control Panel Uninstall a Program or Programs and Features click Turn Windows features on or off check Microsoft.NET Framework 3.5 if it s not already checked.) Page 1 of 16
4 Step 1 Open the CDU Installer folder. Double click on the CduLoadInstall.exe file. Step 2 Click Install to start the installation. NOTE: If your computer already has the.net Framework v2.0 installed, the installer will automatically proceed to Step 9. Page 2 of 16
5 Step 3 Click Yes to install the.net Framework v2.0. Step 4 The Framework will load. Page 3 of 16
6 Step 5 Click on Next to begin the Framework Setup wizard installation process. Step 6 If you accept Microsoft s License Agreement, when the Setup box appears, check the I accept box and Click on Install. Page 4 of 16
7 Step 7 The remaining components will install. This may take a couple of minutes. Page 5 of 16
8 Step 8 When the Setup Complete box appears, click Finish. Step 9 When the Installation Complete box appears, click Next. Page 6 of 16
9 Step 10 Click Finish to close the wizard. The CDULoad has been successfully installed. Step 11 Insert the Comloc hardware into the PC. Page 7 of 16
10 Step 12 The Found New Hardware Wizard will appear. Ensure the Recommended install is checked and click the Next button. Step 13 The software installs automatically on your computer. This may take a moment to complete. Page 8 of 16
11 Step 14 When complete, click on Finish. The program will automatically close. Page 9 of 16
12 Upgrading CDU Firmware to handle Canadian Polymer Notes using PC Loader Utility A Straight through serial cable is required to download the firmware from the PC to the CDU dispenser. If your PC does not have a serial port, you will also require a USB to Serial adaptor. Both parts are readily available at a local electronics store. Step 1 Unplug the unit s data cable from the dispenser. Plug the data cable from the laptop/desktop computer into the dispenser. Step 2 Switch all four dip switches on the dispenser to the OFF position. If the dispenser power is ON when the dip switches are flipped, press the black reset button above the dip switches to set the dispenser into download mode. Page 10 of 16
13 Step 3 Insert the Comloc hardware into the PC. Step 4 Run the Utility Loader by going to Start All Programs Triton CduLoad. Page 11 of 16
14 Step 5 In the drop down box, choose the COM port where the dispenser data cable is plugged in. If you are using a USB to Serial adaptor, you can determine the COM port to use by going to Control Panel Device Manager in Windows. Locate the USB to Serial device name under Ports. The COM port associated with this device is shown. Page 12 of 16
15 Step 6 Click Start. The program will load onto the SCDU Dispenser. The green progress bar will advance as the load proceeds. Page 13 of 16
16 Step 7 When the program has loaded completely, the Status bar at the bottom will state Success. Verify the Checksum in the status bar is C985. You can now disconnect your dispenser safely. Unplug the download data cable from the dispenser and plug the unit data cable back in. Step 8 Switch dip switches 1, 2 & 4 to the ON position. Press the reset button above the switches to put the dispenser into dispense mode. Step 9 If the dispenser is installed in an ATM at the time of upgrade, restart the unit. Page 14 of 16
17 Step 10 Once the load is complete, review the ATM configuration summary. Verify the dispenser firmware version is Page 15 of 16
18 Updating Your SCDU Firmware License Step 1 The SCDU Firmware loader has a set number of downloads. To verify the number of downloads left on your system, insert the Comloc into the computer, open the application and click on About. Step 2 A window will appear that shows the application version information. The number of remaining downloads on the system is shown here. Step 3 To purchase additional downloads, contact Triton Technical Support at , TechSupport@triton.com or Page 16 of 16
upgrading cdu firmware pc loader utility
upgrading cdu firmware pc loader utility Rev C January 20, 2017 Corporate Headquarters: 21405 B St. Long Beach, MS 39560 Phone: (800) 259-6672 Fax: (228) 868-9445 2017 Delaware Capital Formation, Inc.
More informationSECURITY MODULE UPGRADE
SECURITY MODULE UPGRADE TRAVERSE TDN 07103-00232 February 27, 2014 Corporate Headquarters 21405 B Street Long Beach, MS 39560 Phone: (800) 259-6672 Fax: (228) 868-9445 COPYRIGHT NOTICE 2014 Triton. All
More informationARGO US/Canada Software Release Notes
Triton Systems of Delaware, LLC ARGO 3.3.0 US/Canada Software Release Notes Affected products ARGO 7.0 ARGO 7.0 eco ARGO 12.0 April 15, 2013 Version 1.4 Triton Systems of Delaware, LLC 21405 B Street Long
More informationHow to Install Temprecord for Windows Software V5.07 for USB Reader
Temprecord International Ltd PO Box 58-430 Greenmount Auckland, New Zealand Phone +64 9 274 9825 Fax +64 9 273 4020 www.temprecord.com How to Install Temprecord for Windows Software V5.07 for USB Reader
More informationSerial Printer Controller. 91xx / Mako / 97xx. TDN Oct 09, 2012
Serial Printer Controller Replacement 91xx / Mako / 97xx TDN 07100-00127 Oct 09, 2012 Corporate Headquarters: 21405 B Street Long Beach, MS 39560 Phone: (228) 575-3100 Fax: (228) 575-3101 COPYRIGHT NOTICE
More informationVAPOR PRO COMMUNICATIONS
ARIZONA INSTRUMENT LLC VAPOR PRO COMMUNICATIONS OPERATION MANUAL Version 1.0.3 September 2010 Arizona Instrument LLC 3375 N Delaware Street Chandler, AZ 85225 (800) 528-7411 (602) 470-1414 Fax (480) 804-0656
More informationE300 USB Firmware Upgrade
P-1879 1.0 6 March 2012 The current approved revision is available in electronic form or as a controlled hard copy when electronically not available. It is the responsibility of the person printing or
More informationInstalling the Bootloader
Installing the Bootloader The bootloader is a small separate program which resides on the more modern 2B's (Firmware V2.104 and above) which allows you to update the main Firmware program quickly and easily.
More informationCenturion PLUS CPC4 Download Guide using C4 File Transfer Utility
1010537 2010-03-01 Section 50 Centurion PLUS CPC4 Download Guide using C4 File Transfer Utility 1.0 Background 1.1 The Centurion PLUS Control system consists of a Centurion PLUS Core (CPC4-1) and color
More informationT9 EPP KEYPAD FIELD UPGRADE
T9 EPP KEYPAD FIELD UPGRADE TDN 07103-00237 July 1, 2014 Corporate Headquarters 21405 B Street Long Beach, MS 39560 Phone: (800) 259-6672 Fax: (228) 868-9445 COPYRIGHT NOTICE 2014 Triton. All Rights Reserved.
More information2.7 Installing the Windows Printer Driver
2.7 2.7.1 USB Driver Installation Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. If not already done, connect power to the printer. Turn power OFF. Connect the USB port on the rear of the printer to the
More informationThis manual is to explain the procedure for updating the AU-XPD1 firmware on Windows.
Firmware Update This manual is to explain the procedure for updating the AU-XPD1 firmware on Windows. Operating Environment Please perform this update for AU-XPD1 in the following environment. OS: Windows
More informationX1/X2 TDL Gateway Software Release Notes
Triton Systems of Delaware, LLC X1/X2 TDL Gateway Software Release Notes Affected products RL1600, RL2000, RL5000, FT5000, RT2000, Traverse January 9, 2012 Version 1.1 Triton Systems of Delaware, LLC 21405
More informationSerial Printer Controller
Serial Printer Controller Replacement RL / FT / RT XScale RL XP / FT XP TDN 07100-00128 Oct 09 2012 Corporate Headquarters: 21405 B Street Long Beach, MS 39560 Phone: (228) 575-3100 Fax: (228) 575-3101
More informationSetting up the PC ready for BESA 11
Setting up the PC ready for BESA 11 1 - Installing Driver. Important Note: Before you start to install the driver, please do not plug BESA 11 into the computer s USB port or else the installation will
More informationiwear VR920 Firmware Update Instructions Read Before Installing Update
iwear VR920 Firmware Update Instructions Read Before Installing Update Please read the following instructions in their entirety prior to beginning your firmware update. Due to the nature of updating firmware,
More informationTDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
More informationEcoSystem Programmer. Installation Guide. Step 1: Install the EcoSystem Programmer PC Software. Please Read
EcoSystem Programmer Installation Guide Please Read Step 1: Install the EcoSystem Programmer PC Software 1.1 Double-click on EcoSystemSetupTool.msi to install the EcoSystem Programmer application. 1.2
More informationXS US/Mexico Software Release Notes
Triton Systems of Delaware, INC. XS 2.4.0 US/Mexico Software Release Notes Affected products RL1600, RL2000, RL5000, FT5000, RT2000 December 3, 2009 Version 1.6 Triton Systems of Delaware, Inc. 21405 B
More informationXS Canada Software Release Notes
Triton Systems of Delaware, LLC XS 2.4.2 Canada Software Release Notes Affected products RL1600, RL2000, RL5000, FT5000, RT2000 September 21, 2010 Version 1.2 Triton Systems of Delaware, LLC 21405 B. Street
More informationWindows Installation support
Windows Installation support Installing Riffmaster Pro to your PC is easy. Just in case you want some help with the process, we have listed all the steps in the process in this document. Download Go to
More informationPS751 - Firmware(FW) Upgrade Instruction
PS751 - Firmware(FW) Upgrade Instruction 1. Before FW upgrade, please check the current FW version of PS751. ([Menu] [Setting] [Advanced] [Firmware Version]) 1.1 If the current FW before PVT108(included),
More informationX35 Apollo System Upgrading Monitor Software & ECU Firmware Version
X35 Apollo System Upgrading Monitor Software & ECU Firmware Version 4.01.509 New X35 equipped tanks and drills for 2018 will require software and firmware as listed below. If software and firmware are
More informationX35 Apollo System Upgrading Monitor Software & ECU Firmware Version
X35 Apollo System Upgrading Monitor Software & ECU Firmware Version 4.01.508 4.01.508 http://download.bourgault.com 4.01.508 1. Download zip file attachment to a folder on your computer. File name will
More informationController PC Hard Drive
Controller PC Hard Drive Remove and Replace Procedure Guide (Models RL/FT5000 XP ) TDN 07103-00194 08/2008 Corporate Headquarters: 522 E. Railroad Street Long Beach, MS 39560 Phone: (228) 868-1317 Fax:
More informationSoftware Upgrade Assistant Manual for DuraXV
Software Upgrade Assistant Manual for DuraXV 2015 Kyocera Corporation. All rights reserved. KYOCERA is a registered trademark of Kyocera Corporation. All other trademarks are the property of their respective
More informationQuick Install Guide. Wireless-G Network PCI Adapter. WLP54G 3a
Quick Install Guide Wireless-G Network PCI Adapter WLP54G 3a TABLE OF CONTENTS 1: INTRODUCTION...1 PACKAGING CONTENT...1 2: DRIVERS & UTILITY INSTALLATION...2 3: UNPLUG PCI ADAPTER FROM THE SYSTEM...11
More informationQUICK START GUIDE. Section 6: MAC OSX 1. USB DRIVER INSTALLATION
QUICK START GUIDE Section 6: MAC OSX 1. USB DRIVER INSTALLATION 61 Quick Start Guide SECTION 6: MAC OSX 1. USB INSTALLATION FOR MAC Step 1 Open up System Preferences: Step 2 Plug in the USB cable to your
More informationThe port replicator may have features that are not supported by your computer.
Please refer to the product label for the HP product number and serial number. This is useful information if you ever need to contact technical support. Getting Started This section identifies the visible
More informationFirmware Update Manual for Sony Cyber-shot digital still cameras
Firmware Update Manual for Sony Cyber-shot digital still cameras - DSC-T1 The term Firmware refers to the software in your Cyber-shot camera. You can update this software to solve problems or to add new
More informationFile Manager Rev. 1.0
File Manager 2016.12 Rev. 1.0 Contents 1.Introduction...1 1-1.Overview...1 1-2. System Requirements and Restrictions...1 2.Installation on Windows PC...2 2-1.Installation...2 2-2.Uninstallation...4 3.How
More informationBrainMaster 3.4 Software Installation for Windows XP
BrainMaster 3.4 Software Installation for Windows XP Make sure to install the software BEFORE attempting to plug in the Atlantis hardware module. Please install the software first, and then the hardware
More informationLogic Controls LV3000 USB Connected Virtual Pole Display on Windows Embedded, Vista, 7
One Blue Hill Plaza, 16 th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Logic Controls LV3000 USB Connected Virtual Pole Display on
More informationKeyAT-5 Firmware Upgrade
L 3 Systems, Inc. PO Box 2954, Redmond, WA 98073 These are instructions for upgrading firmware for the KeyAT-5 RS-232 to USB Keyboard Port Adapter. Connections The KeyAT-5 RS-232 to USB Keyboard Port Adapter
More informationR&S NRP-Z27/-Z37 Power Sensor Module Release Notes Firmware Version 04.18a
R&S NRP-Z27/-Z37 Power Sensor Module Release Notes Firmware Version 04.18a 2010 Rohde & Schwarz GmbH & Co. KG 81671 Munich, Germany Printed in Germany Subject to change Data without tolerance limits is
More informationUpgrade your IsatPhone
Upgrade your IsatPhone How to Upgrade your IsatPhone 1 INSTALLING THE ISATPHONE 2 FIRMWARE UPGRADE TOOL From time to time, it may be necessary to upgrade your phone in order to improve its functionality
More information1. Introduction. 2. Installation INSTALLATION INSTRUCTIONS: MCD USB MODULE
Introduction INSTALLATION INSTRUCTIONS: MCD USB MODULE 1. Introduction The USB Module can be used in conjunction with WinMaster to manage Danfoss soft starters. These instructions detail the installation,
More informationIDWedgeBT USB Virtual Serial Port Cable Installation, Configuration and Operation
IDWedgeBT USB Virtual Serial Port Cable Installation, Configuration and Operation Introduction This document explains how to install, configure and use the IDWedgeBT USB Virtual Serial Port Cable to update
More informationThe Firmware Update is a tool that easily updates the embedded components on your FTB-1.
FTB-1 Introduction The is a tool that easily updates the embedded components on your FTB-1. Note: The tool replaces the old Embedded Software Updater (ESU). Release History This release of includes the
More informationPrimex Device Configuration Software Advanced User Guide
Primex Device Configuration Software Advanced User Guide OneVue Wi-Fi & PoE Synchronized Time Solution OneVue is a trademark of Primex. The innovative technology software solution for facility and time
More informationUSB MODEM UPGRADE INSTALLATION/SETUP PROCEDURES (MODELS RL/FT5000/RT2000)
INSTALLATION/SETUP PROCEDURES (MODELS RL/FT5000/RT2000) TDN 07100-00047B 07/2008 CORPORATE HEADQUARTERS: 522 E. Railroad Street Long Beach, MS 39560 Phone: (228) 868-1317 Fax: (228) 868-0437 COPYRIGHT
More informationOpenDRO User s Guide (rev. 2) SHUMATECH. DRO-550 Software Upgrade Guide
SHUMATECH DRO-550 Software Upgrade Guide 1 Revision History Revision Description 1 Initial release 2 Updated to use BOSSA instead of SAM-BA Table of Contents Step 1. Download the OpenDRO Image... 2 Step
More informationST9150: Secure Print Module User s Guide
ST9150: Secure Print Module User s Guide ST9150: Secure Print Module User s Guide Source Technologies, LLC 4205B Westinghouse Commons Dr. Charlotte, NC 28273 Phone: 1.800.922.8501 Fax: 704.969.7595 www.sourcetech.com
More informationWindows XP Software Installation Instructions GCC Elite Series Printers
TM Windows XP Software Installation Instructions GCC Elite Series Printers This document is intended to provide instructions for obtaining and installing the Windows XP driver software for GCC s Elite
More informationHow to Use imageprograf Firmware Update Tool (Version or later) (Mac OS) Canon Inc.
How to Use imageprograf Firmware Update Tool (Version 24.00 or later) (Mac OS) Canon Inc. 1. Introduction 1.1 imageprograf Firmware Update Tool Features The imageprograf Firmware Update Tool (hereinafter
More informationBQ Firmware Flash Tool 3.0. User Manual
BQ Firmware Flash Tool 3.0 User Manual Contents 03 About the application BQ Firmware Flash Tool 03 Devices which support BQ Firmware Flash Tool 04 Necessary resources 05 Installing the application in Windows
More information75 New Hampshire Avenue, Portsmouth, NH USA phone: fax:
Cover Title Delphi 9.5.3 Workstation Setup Guide Draft October 26, 2010 October 26, 2010 Copyright 2010 Newmarket International, Inc. All rights reserved. The information in this document is confidential
More information12.0 Setting up the PC ready for BESA 11
12.0 Setting up the PC ready for BESA 11 12.1 - Installing Driver. Important Note: Before you start to install the driver, please do not plug BESA 11 into the computer s USB port or else the installation
More informationUpdate process is different depending on firmware version
Page 1 of 11 Firmware Upgrade for DLA-X500RBE, DLA-X500RBU, DLA-X500RWE, DLA-X700RBE, DLA-X700RBU, DLA-X900RBE, DLA-X900RBU, DLA-XC5880RB, DLA-XC7880RB, DLA-RS4910U, DLA-RS49E, DLA-RS49U, DLA-RS57E, DLA-RS57U,
More informationEMV 330 CARD READER UPGRADE
EMV 330 CARD READER UPGRADE TDN 07103-10182 February 27, 2014 Corporate Headquarters 21405 B Street Long Beach, MS 39560 Phone: (800) 259-6672 Fax: (228) 575-3101 COPYRIGHT NOTICE 2014 Triton. All Rights
More informationFirmware Upgrade for JVC projectors 2013 models*
Page 1 of 10 Firmware Upgrade for JVC projectors 2013 models* *DLA-X500RBE, DLA-X500RBU, DLA-X500RWE, DLA-X700RBE, DLA-X700RBU, DLA-X900RBE, DLA-X900RBU, DLA-XC5880RB, DLA-XC7880RB, DLA-RS4910U, DLA-RS49E,
More informationDigidownHost. Software User s Guide. Lisle Design Ltd 2014 Subject to change without notice
DigidownHost Software User s Guide Subject to change without notice DigidownHost User s Guide Contents About DigidownHost... 2 Installing DigidownHost... 3 The DigidownBase Driver Installer... 9 Uninstalling
More informationINTRODUCTION...1. Under Windows 98SE... 2 Under Windows ME... 6 Under Windows Under Windows XP...10
CONTENTS INTRODUCTION...1 I. Install the USB-IrDA Adaptor driver... 2 Under Windows 98SE... 2 Under Windows ME... 6 Under Windows 2000... 9 Under Windows XP...10 II. Make sure the USB-IrDA Adaptor installed
More informationTrimble Survey GNSS Firmware Version 5.01 (April 2015) The following table identifies the Survey GNSS receivers supported by this revision.
RELEASE NOTES 15 APRIL 2015 TRIMBLE SURVEY GNSS FIRMWARE Trimble Survey GNSS Firmware Version 5.01 (April 2015) Requirements This firmware version includes improvements to the Survey Receiver firmware.
More informationNSP GUIDE Activation and Upgrade of Products with NSP
NSP GUIDE Activation and Upgrade of Products with NSP This guide is only applicable to: CODESOFT 9.10 LABEL MATRIX 8.60 LABEL MATRIX 8.70 LABELVIEW 8.60 LABELVIEW 9 SENTINEL 6.1 BACKTRACK 7.0 LABEL ARCHIVE
More informationUser s Manual. Touch Panel Driver. Important
User s Manual Touch Panel Driver Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document is
More informationQuick Start Guide for mbed enabling Freescale FRDM-KL25z Freedom board
Quick Start Guide for mbed enabling Freescale FRDM-KL25z Freedom board FRDM-KL25Z Freedom board is a low-cost evaluation and development platform to demonstrate the capability of the Kinetis-L family of
More informationUser s Manual. Touch Panel Setting Tool. Important
User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document
More informationDeposit Wizard Panini Installation Guide
Guide Table of Contents System Requirements... 2 WebScan Overview... 2 Hardware Requirements... 2 Supported Browsers... 2 Driver Installation... 2 Step 1 - Determining Windows Edition & Bit Count... 3
More informationDo NOT install the GCC USBsetup program on a 64 BIT OS.
Installing a C180 Print Driver on a 64 Bit OS connected by the USB connection. (Same instruction may also be used on all 32 Bit OS as well.) Copyright Koser Enterprises, Inc 2013 Member of the LaserProNA.com
More informationFrequently Asked Questions
Frequently Asked Questions This appendix offers you a quick reference to common questions that customers have about using the TurningPoint software. If you do not find an answer to your question here,
More informationAgilent MassHunter Workstation Software for Triple Quad LC/MS
Agilent MassHunter Workstation Software for Triple Quad LC/MS Upgrade Guide Step 1. Prepare for installation 2 Step 2. Install the Acquisition program (includes Optimizer and Study Manager) 3 Step 3. Install
More informationInstallation Instructions
Installation Instructions Windows 7/XP Printer Driver USB (USB Printer Class only) / LAN Overview: The Windows Printer Driver for Windows 7 and XP Pro requires a new interface type, which is a true USB
More informationSmartPro Software Installation Guide. SmartPro Software Installation Guide
SmartPro Software Installation Guide www.protosmart.co.uk Page 1 of 11 Features... 3 Kit Contents... 3 Software Installation... 3 Driver Installation... 7 www.protosmart.co.uk Page 2 of 11 Please view
More informationTrouble shooting the DeskCNC controller:
Checking for a functional card. 1) Unplug/Disconnect all connections to the I/O and step and direction pins/terminals. 2) Apply regulated 5vdc to the +5 and gnd terminals. CHECK FOR CORRECT POLARITY WITH
More informationSoftware Kit. Automatic Door Controls. SIDOOR Software Kit. Introduction 1. General safety instructions. Installation. Uninstalling the software 4
Introduction 1 General safety instructions 2 Automatic Door Controls SIDOOR Operating Instructions Installation 3 Uninstalling the software 4 Sidoor User Software 5 HCS12 Firmware Loader 6 Sidoor Manager
More informationAnySite. Australia. Install Guide. AnySite v9.1 Install Guide
AnySite Australia Install Guide AnySite v9.1 Install Guide TABLE OF CONTENTS Chapter 1: Introduction... 4 Product Inventory Chapter 2: Before You Begin... 6 Permissions System Requirements Default Install
More informationData setting software MEXE02
HM-40143 Data setting software MEXE02 OPERATING MANUAL Before Use Thank you for purchasing an Oriental Motor product. This operating manual describes product handling procedures and safety precautions.
More informationJUNE 2000 IC136C. USB Card
USB Card JUNE 2000 IC136C CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500
More informationPlug the USB cable into the WebMaster/WebAlert and your computer. You will see this message on your screen
QUICK START GUIDE USB DRIVER INSTALLATION Step 1 Plug the USB cable into the WebMaster/WebAlert and your computer. You will see this message on your screen Step 2 Go to Start, Control Panel and Click System
More informationPL2303 USB-to-Serial Bridge Chip Family Windows Driver Installer User Manual
PL2303 USB-to-Serial Bridge Chip Family Windows Driver Installer User Manual WHQL Driver Version Information Driver Installer & Build date: 1.6.0 (2012-4-26) GUID: ECC3713C-08A4-40E3-95F1-7D0704F1CE5E
More informationmce100+ getting started guide Install mce100+ The disc will run and display the below screen: Choose Install mce to continue
content between two the phonebook records of a content from a 1. Insert the mce CD. 2. Choose the Run mce Setup button. The disc will run and display the below screen: Choose mce to continue 5. Ready to
More informationWaters Empower Software A1100 System Configuration Instructions for Ethernet Control
Waters Empower Software A1100 System Configuration Instructions for Ethernet Control In order to configure an A1100 system for Ethernet control or to acquire A1100 DAD 3D data in Empower Software, it is
More informationSystem Firmware Update Instructions for AVIC-5000NEX, AVIC-6000NEX, and AVIC-7000NEX
System Firmware Update Instructions for AVIC-5000NEX, AVIC-6000NEX, and AVIC-7000NEX IMPORTANT Please download and print these firmware update instructions before downloading and installing the firmware
More informationPulse 4.11 SCADA/HMI. Installation Guide
Pulse 4.11 SCADA/HMI Installation Guide June 2017 Copyright The information in this document is subject to change without prior notice and does not represent a commitment on the part of AFCON Control and
More informationMF9300. Software setup guide
MF900 Software setup guide 0000 79-0 S INTRODUCTION This manual explains how to install and configure the software that is required for the printer function of the machine. The procedure for viewing the
More informationCodeLoader. Users Guide. P/N: Rev: OCT04
CodeLoader Users Guide P/N: 3100788 Rev: 1.0 04OCT04 DEVELOPED BY COPYRIGHT NOTICE TRADEMARKS CREDITS Edwards Company 6411 Parkland Drive Sarasota FL 34243 (941) 739-4300 Copyright 2004 Edwards Company
More informationUser s Manual. Touch Panel Setting Tool. Important
User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document
More informationHDMI A/V over Gigabit Ethernet Adapter. User s Manual
HDMI A/V over Gigabit Ethernet Adapter User s Manual HDMI A/V over Gigabit Ethernet Adapter User s Manual ABOUT THIS MANUAL This manual is designed for use with the HDMI A/V over Gigabit Ethernet Adapter.
More informationPowerVIEW HD 22/30 Version
Release Notes 9/17/15 PowerVIEW HD 22/30 Version 1.01.04 Released 9/17/15 Additions and Enhancements Improved IR Processing in Half-Recessed Ceiling Mount Improved 1080p/25 video quality. Fixed Issues
More informationEquipment Software Loader 2
Equipment Software Loader 2 User Manual Rev. 1.0 Contents 1. SYSTEM REQUIREMENTS... 3 2. INSTALLATION AND CONFIGURATION... 4 2.1. INSTALLATION... 4 2.2. CONFIGURATION... 4 3. USE THE PROGRAM... 6 3.1.
More informationYAESU MUSEN CO., LTD.
FT1DR/DE Main Firmware Update Instruction Manual (This firmware is not compatible with the FT1XDR/DE) Caution! Please be sure to confirm the model and the version of your transceiver before starting the
More informationFirmware install with Windows XP
Firmware install with Windows XP Step 1. Go to our website www.midnitesolar.com and Left Click on Firmware. Step 2. Left Click on Download Firmware. Step 3. Read the Notes in red first and then Left Click
More information2.2 Service Pack 1 Release Notes September, 2011
Opticom Central Management Software 2.2 Service Pack 1 Release Notes September, 2011 What's New in Opticom Central Management Software 2.2, Service Pack 1 Corrected an issue where active monitoring of
More informationNX-588E USB Flash Programmer Instructions v1.1
NX-588E USB Flash Programmer Instructions v1.1 Installing the NX-588E on a computer This process should take 5-10 min. 6. The following screen will appear: It is essential you carry out this step from
More informationUser Guide for Windows OS
User Guide for Windows OS PanaCast 2 Firmware Update September 2017 X0.3.1.30 This guide explains how to update the firmware on PanaCast 2 for Windows OS. It also shows you how to adjust your PanaCast
More informationB MP45 Driver installation Windows Vista, page 8 D Uninstall MP45 Driver Windows Vista, page 14
Doc BSL 375 Driver Guide BSL Driver Guide Administrator Privileges Required 42 Aero Camino, Goleta, CA 93117 Tel (805) 685-0066 Fax (805) 685-0067 info@biopac.com www.biopac.com A MP45 Driver installation
More informationAMS 360 In-House and Transfer Manager.NET
AMS 360 In-House and Transfer Manager.NET 07/07 Standard Disclaimer The staff of AMS Services has taken due care in preparing these instructions; however, nothing herein modifies or alters in any way the
More informationP3PC ENZ0. Troubleshooting. (installation)
P3PC-3702-01ENZ0 Troubleshooting (installation) Introduction Thank you for purchasing the color image scanner ScanSnap S1500/S1500M/S1300i/S1300/ S1100 (hereinafter referred to as "the ScanSnap"). This
More informationInstalling LE History Record Reader program software.
INSTALLATION & OPERATING INSTRUCTIONS FOR THE LE HISTORY RECORD READER These Instructions will inform you on how to install software to use the RS-232/USB Isolator- Adapter and your LE History Record Reader
More informationP3PC ENZ0. Troubleshooting. (installation)
P3PC-4222-04ENZ0 Troubleshooting (installation) Introduction Thank you for purchasing the color image scanner ScanSnap ix500 (hereinafter referred to as "the ScanSnap"). This manual provides information
More informationUniversal CCU CAT-5 Release Notes
BLURB Release Notes Universal CCU CAT-5 Release Notes Release Version: V 1.01.16 Release Date: 10/30/2014 Component Version Hardware -327A PIC 1.01.16 FPGA update not needed in this release New Features
More informationPG1000. Multi-Tech Reader and Programmer User Guide
PG1000 Multi-Tech Reader and Programmer User Guide Contents Contents Requirements and Specifications... 3 Schlage PG1000 Desktop Multi-Tech Programmer and Reader... 3 Computer Requirements... 3 Minimum...
More informationACR3901U-S1. Secure Bluetooth Contact Card Reader. User Manual V1.01. Subject to change without prior notice.
ACR3901U-S1 Secure Bluetooth Contact Card Reader User Manual V1.01 Subject to change without prior notice Table of Contents 1.0. Introduction... 3 2.0. For ios... 4 2.1. Install the Bluetooth demo application...
More informationSPEECH UPGRADE INSTALLATION GUIDE (MODEL 9100)
SPEECH UPGRADE INSTALLATION GUIDE (MODEL 900) TDN 0700-00062 07/2006 CORPORATE HEADQUARTERS: 522 E. RAILROAD STREET LONG BEACH, MS 39560 PHONE: (228) 868-37 FAX: (228) 868-0437 RMA (RETURN MATERIAL AUTHORIZATION)
More informationPacific Sun. User Manual
Pacific Sun User Manual Preface Congratulations on your purchase! Pacific Sun lamps are made with highest quality materials, and made to last! Lamps can be programmed down to finest detail; however there
More informationXS US Software Release Notes
Triton Systems of Delaware, LLC XS 3.1.0 US Software Release Notes Affected products RL1600, RL2000, RL5000, FT5000, RT2000 June 6, 2012 Version 1.4 Triton Systems of Delaware, LLC 21405 B Street Long
More informationXGate Quick Start Guide for Apple Macintosh OS
XGate Quick Start Guide for Apple Macintosh OS This Quick Start Guide contains essential streamlined instructions for downloading, installing and using XGate. Please refer to the XGate Help File for more
More informationINSTALLATION GUIDE. Trimble AllTrak Software
INSTALLATION GUIDE Trimble AllTrak Software INSTALLATION GUIDE Trimble AllTrak software Version 3.5 Revision A_ENG November 2012 F Trimble Navigation Limited Building Construction 5475 Kellenburger Road
More informationSoftware Setup Instructions for the Foster Control System used in the Explora Dome Observatories
Software Setup Instructions for the Foster Control System used in the Explora Dome Observatories Contents Pages 3 & 4 The new tic counter system & home position sensor Page 5 Control Boxes Pages 6-8 Down
More information