DC/DC Wide Input Converter ECW 10A Series

Transcription

1 FABRIMEX AG CH-8608 Bubikon/Switzerland DC/DC Wide Input Converter ECW 10A Series * I/O isolation of 1500 Vdc * Pi-filter at input * Continuous short circuit proof * Up to 89% efficiency * Low output ripple and noise * High power density * Metal DIL-24 case * UL certified * Dimensions: 31.8 x 20.3 x 10.2mm SMD: 31.8 x 20.3 x 11.4mm Product Range Model Input Uin nom. Output Efficiency Max. nominal range full load no load Uout Iout max. power typ. capacity Single ECW12-2V510ASH 12Vdc Vdc 0.753A 40mA 2.5Vdc 3.0A 7.5W 83% 3'000uF ECW12-3V310ASH 12Vdc Vdc 0.971A 40mA 3.3Vdc 3.0A 10W 85% 3'000uF ECW ASH 12Vdc Vdc 0.958A 40mA 5.0Vdc 2.0A 10W 87% 2'000uF ECW ASH 12Vdc Vdc 0.949A 40mA 12Vdc 0.835A 10W 88% 835uF ECW ASH 12Vdc Vdc 0.946A 40mA 15Vdc 0.666A 10W 88% 666uF Page 1/6 Datasheet No: Rev. D /

2 ECW24-2V510ASH 24Vdc Vdc 0.368A 30mA 2.5Vdc 3.0A 7.5W 85% 3'000uF ECW24-3V310ASH 24Vdc Vdc 0.480A 30mA 3.3Vdc 3.0A 10W 86% 3'000uF ECW ASH 24Vdc Vdc 0.475A 30mA 5.0Vdc 2.0A 10W 88% 2'000uF ECW ASH 24Vdc Vdc 0.470A 30mA 12Vdc 0.835A 10W 89% 835uF ECW ASH 24Vdc Vdc 0.468A 30mA 15Vdc 0.666A 10W 89% 666uF ECW48-2V510ASH 48Vdc Vdc 0.185A 15mA 2.5Vdc 3.0A 7.5W 85% 3'000uF ECW48-3V310ASH 48Vdc Vdc 0.240A 15mA 3.3Vdc 3.0A 10W 86% 3'000uF ECW ASH 48Vdc Vdc 0.240A 15mA 5.0Vdc 2.0A 10W 87% 2'000uF ECW ASH 48Vdc Vdc 0.235A 15mA 12Vdc 0.835A 10W 89% 835uF ECW ASH 48Vdc Vdc 0.234A 15mA 15Vdc 0.666A 10W 89% 666uF Dual ECW ADH 12Vdc Vdc 0.956A 20mA +12Vdc A 5W 87% 416uF -12Vdc A 5W 416uF ECW ADH 12Vdc Vdc 0.968A 20mA +15Vdc A 5W 86% 333uF -15Vdc A 5W 333uF ECW ADH 24Vdc Vdc 0.473A 20mA +12Vdc A 5W 88% 416uF -12Vdc A 5W 416uF ECW ADH 24Vdc Vdc 0.478A 20mA +15Vdc A 5W 87% 333uF -15Vdc A 5W 333uF ECW ADH 48Vdc Vdc 0.236A 10mA +12Vdc A 5W 88% 416uF -12Vdc A 5W 416uF ECW ADH 48Vdc Vdc 0.239A 10mA +15Vdc A 5W 87% 333uF -15Vdc A 5W 333uF Nomenclature ECW Product Series Nominal input voltage Nominal output voltage Output power A S H - S Diverse S = SMD Pinning Isolation H = 1500Vdc, metal case Channels D = Dual S = Single Case A = case A Specifications All values refer to an ambient temperature of 25 C and nominal rated values where nothing else is specified. Input Specifications U IN Input voltage See product range V U UVLO Under voltage lockout V Max. input current at full load See product range A No load input current See product range ma Page 2/6 Datasheet No: Rev. D /

3 Output Specifications U ACC Output voltage accuracy s: ±1.5, d: ±2 % Output voltage adjust % Line regulation % Load regulation 10% / 100% step load change % Load transient recovery time 25% / 100% step load change 300 us Load transient error band ±5 % Temperature coefficient ±0.05 %/K Ramp up time ms Start up time 120 ms Ripple and noise BW = 20MHz s: 75, d:100 mvpp Current limit % Over voltage protection % Short circuit protection 150 % Short circuit characteristic continuous General Specifications U ISO Isolation voltage 1500 V R ISO Isolation resistance 1000M Ohm F SW Switching frequency 380 khz Approvals UL / cul Safety Approvals MTBF 1.15 Mio h Case material Copper, black coated Compound material PCB material Weight 19 gr Dimensions 31.8 x 20.3 x 10.2 (SMD) 11.4 mm Soldering infos 260 C for 3-6 s EMC Specifications EMC conducted See EMC information EN55022/11 Class A Environmental Specifications T AMB Operation temperature Max. case temp. < 100 C C T AMB Storage temperature C T SD Thermal shutdown range C Page 3/6 Datasheet No: Rev. D /

4 EMC information No EMC graph available yet, please contact factory No EMC filter available yet, please contact factory Page 4/6 Datasheet No: Rev. D /

5 Case Normal tolerance 1/10 ±0.5 mm, 1/100 ±0.25 mm; Pin tolerance ±0.5 mm diameter NP = No pin, NC = Not connected, NA = Not available for electrical contact, do not connect THT Pin Single Dual Pin 2 Gi Gi 2 3 Gi Gi 3 9 NP Go 9 11 NC -Vo Vo +Vo Go Go Vi Vi Vi Vi 23 Cleaning The modules are cleanable with the today's known and in the electronics industry usually used products. Due to the different cleaning processes and new available products, we highly recommend to do a compatibility test when using the converters the first time. Page 5/6 Datasheet No: Rev. D /

6 Own notes Notice: All statements, technical information, and recommendations related to FABRIMEX's products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before utlizing the product, the user should determine the suitability of the product for its intended use. Switzerland: FABRIMEX AG - Techcenterstr. 2 CH-8608 Bubikon Tel: Fax: info@fabrimex.ch Germany: CAC FABRIMEX GmbH - Karlstrasse 70 D Gerstetten Tel: Fax: info@cac-fabrimex-ger.de Page 6/6 Datasheet No: Rev. D /