DC/DC Regulator ERW 20A Series
|
|
- Ann Todd
- 5 years ago
- Views:
Transcription
1 DC/DC Regulator ERW 20A Series - DC/DC non-isolated regulator modules - Industry standard pinning - Continuous short circuit proof - High efficiency up to 94% - Very low output ripple and noise - Over temperature protection - Single-in-line footprint or surface mounted - External output voltage adjust - Remote on/off control - DC/DC Regler ohne galvanische Trennung - Industriestandard pinning - Dauerkurzschlussfest - Hoher Wirkungsgrad von bis zu 95% - Sehr gute Werte von Rippel und Noise - Übertemperaturschutz - Single-in-line footprint oder surface mounted - Ext. Ausgangsspannungsabgleich - Inhibit - Module convertisseur DC/DC sans séparation galvanique - Pinning standard industriel - Protection contre courts-circuits permanents - Degré d?efficacité jusqu'à 94% - Ondulation résiduellede sortie très faible - Protection de température trop éleveé - Single-in-line footprint ou SMD - Ajustement externe de la tension sortie - Fonction inhibit Product Range Typenübersicht Sommaire des types Model Input Input Uin nom. Output Efficiency nominal range full load no load Uout Iout max. power typ. Single ERW A 12VDC VDC 1603mA 40mA VDC 20A 15W 78% 12VDC VDC 2381mA 50mA 1.2VDC 20A 24W 84% 12VDC VDC 2874mA 50mA 1.5VDC 20A 30W 87% 12VDC VDC 3409mA 50mA 1.8VDC 20A 36W 88%
2 12VDC VDC 3745mA 60mA 2.0VDC 20A 40W 89% 12VDC VDC 4630mA 65mA 2.5VDC 20A 50W 90% 12VDC VDC 5978mA 75mA 3.3VDC 20A 66W 92% 12VDC VDC 8865mA 95mA 5.0VDC 20A 100W 94% ERW A-S 12VDC VDC 1603mA 40mA VDC 20A 15W 78% 12VDC VDC 2381mA 40mA 1.2VDC 20A 24W 84% 12VDC VDC 2874mA 50mA 1.5VDC 20A 30W 87% 12VDC VDC 3409mA 50mA 1.8VDC 20A 36W 88% 12VDC VDC 3745mA 60mA 2.0VDC 20A 40W 89% 12VDC VDC 4630mA 65mA 2.5VDC 20A 50W 90% 12VDC VDC 5978mA 75mA 3.3VDC 20A 66W 92% 12VDC VDC 8865mA 95mA 5.0VDC 20A 100W 94% Voltage set Vo [V] Rtrim [kohm] Open Specifications Spezifikationen Specifications All values refer to an ambient temperature of 25 C and nominal rated values where nothing else is specified. Input Specifications U IN Input voltage 6.0 / V U UVLO Under voltage lockout 4 5 V Max. input current at full load See product range A
3 No load input current See product range ma Output Specifications U ACC Output voltage accuracy ±1.5 % Output voltage adjust VDC % Line regulation ±0.2 % Load regulation ±0.5 % Load transient recovery time 200 us Load transient error band 200mV % Temperature coefficient ±0.03 %/K Ramp up time Start up time ms ms Ripple and noise BW = 20MHz 75 mvpp Current limit % Over voltage protection % Short circuit protection % Short circuit characteristic continuous (hiccup mode) General Specifications U ISO Isolation voltage V R ISO Isolation resistance Ohm R ISO Switching frequency 300 khz Approvals UL / cul 1950 MTBF h Case material Open Frame Compound material PCB material Weight 8.5 gr Dimensions 50.8 x x 8.3 mm Soldering infos 260 C for 10 s EMC Specifications EMC conducted Environmental Specifications T CASE Operation temperature C T AMB Storage temperature C T SD Thermal shutdown range 130 C
4 EMC information EMV Informationen Information CEM No EMC graph available yet, please contact factory No EMC filter available yet, please contact factory Block diagram Blockdiagramm Synoptique Inhibit Inhibit Inhibit The ERW 20A Series allows the user to switch the module on and off electronically by inhibit on/off feature. The converters are available in "positive logic" or "negative logic" (option) versions for inhibit on/off. Logic table Logic state Negative logic* Positive logic Application example Inhibit Logic low Module on Module off Logic high Module off Module on * Suffix "N" to the model number with active low inhibit on /off High signal here disable output (positive logic) -Vin Own notes Eigene Notizen Vos notices
5 Case Gehäuse Boîtier Normal tolerance 1/10 ±0.5 mm, 1/100 ±0.25 mm; Pin tolerance ±0.5 mm diameter, NP = No pin, NC = Not conected ERW , (SIL-12): ERW , (SMD): Pin Single 1 +Vo 2 +Vo 3 +sense 4 +Vo 5 Com 6 NP / PGood 7 Com 8 +Vi 9 +Vi 10 Sequency 11 Trim 12 on/off Pin Single 1 on/off 2 NP / PGood 3 +sense 4 Trim 5 +Vo 6 Com 7 Sequency 8 +Vi Cleaning Waschen Lavage The modules are cleanable with the today's known and in the electronics industry usually used products. Due to the different cleaning processes and new available products, we highly recommend to do a compatibility test when using the converters the first time. Die Module sind waschbar mit den heute bekannten und in der Elektronikindustrie üblichen Reinigungsmitteln. Bedingt durch die verschiedenen Reinigungsprozesse und neu auf den Markt kommende Mittel, raten wir dringend beim Ersteinsatz der Konverter eine Verträglichkeitsprüfung vorzunehmen. Les modules sont lavables avec les solvants couramment utilisés dans l'industrie électronique. Dû aux differents processus de lavage et aux nouveaux détergents disponibles sur le marché, il est strictement recommandé de faire un test de compatibilité avant la première utilisation.
DC/DC Regulator ERW 16A Series
DC/DC Regulator ERW 16A Series - DC/DC non-isolated regulator modules - Industry standard pinning - Continuous short circuit proof - High efficiency up to 95% - Very low output ripple and noise - Over
More informationDC/DC Regulator ERS 5A Series
DC/DC Regulator ERS 5A Series DC/DC non-isolated regulator modules - Industry standard pinning - Continuous short circuit proof - High efficiency up to 94% - Very low output ripple and noise - Over temperature
More informationDC/DC Wide Input Converter ECW 10A Series
FABRIMEX AG CH-8608 Bubikon/Switzerland DC/DC Wide Input Converter ECW 10A Series * I/O isolation of 1500 Vdc * Pi-filter at input * Continuous short circuit proof * Up to 89% efficiency * Low output ripple
More informationAC/DC Open Frame Modules 10/15/20/40/60 Watt
FABRIMEX AG CH-88 Bubikon/Switzerland POWER SUPPLIES Certified Management-System ISO 91 Reg. Nr. 12666 AC/DC Open Frame Modules 1/15/// Watt AC/DC open frame module Universal input voltage PCB mountable
More information1W & 2W Wide Input Range DC/DC CONVERTERS. Features
1W & 2W Wide Input Range DC/DC CONVERTERS Features 8 Pin SIP Package 2:1 Wide Range Input Nominal 5V, 12V, 24V and 48V input Single and dual outputs Regulated Output 1kV isolation, 2kV &3kV options 40
More information2:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 88% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 2:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 88% Ultraminiature Open Frame SMD No Minimum Load Required The RP15-SOF series, are SMD
More informationMB2000ERUI. High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers. Key Features:
MB2000ERUI High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers Key Features: 20W Power 4:1 Input Voltage Range EN 60950 Approved 3,000 Isolation Efficiency to 90% Meets EN 55032 Compact 1 x 2
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield Description The series wide range input / converters are certified to
More informationDC/DC Point-of-Load (POL) Converter Input: 2.4 to 5.5Vdc or 8.3 to 14Vdc, Output: Vout = 0.75 to 3.3Vdc or 0.75 to 5.0Vdc, I out = 6A, 10A or 16A
TOS Series Application Note DC/DC Point-of-Load (POL) Converter Input:. to 5.5Vdc or 8.3 to 1Vdc, Output: Vout =.75 to 3.3Vdc or.75 to 5.Vdc, I out = A, 1A or 1A (Pending) Applications Intermediate Bus
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required Description The wide range input
More informationPackage (4) Control Logic (3)
Features Regulated Converters 2:1 Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Fixed Operating Frequency Description The series / converters are certified
More informationQKS48T21120 DC-DC Bus Converter Data Sheet Quarter-Brick with 48VDC Input; 21A Output
Quarter-Brick with 48 Input; 12 @ 21A Output Benefits Simplifies power system design; reduces design time and technical risk Compatible with all (12 Vin nom.) POLs available in the market Applications
More informationDC/DC Converters. TSM Series, 1 Watt. Features. Models
TSM Series, Watt Features SMD package (SOIC-4/8) Construction in lead frame technology Isolated single and dual output I/O isolation 000 VDC High efficiency Operating temperature 40 C to +85 C Reflow solder
More informationFeatures. Regulated Converters. RP10-AW 10 Watt 1 x1 Single & Dual Output RP10- _AW/_- DC/DC Converter
Features Regulated Converters : wide input voltage range.kv isolation UL0950- certified Efficiency up to 9% Six-sided continuous shield No minimum load required Description The series are wide input voltage
More informationoutput voltage output current max (A)
date 12/21/2011 page 1 of 6 SERIES: VYC0W DESCRIPTION: DC-DC CONVERTER FEATURES up to 0 W output industry standard pinout :1 input range (9 ~ 6 V, 18 ~ 7 V) single, dual, and triple outputs 1,00 V isolation
More informationMI1000ERW. Series. Miniature 1 x 1, 2:1 Input, 10W DC/DC Con vert ers. Key Features:
MI1000ERW Miniature 1 x 1, 2:1 Input, 10W DC/DC Con vert ers Key Features: 10W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 Remote On/Off Control
More informationR0.5S_D ECONOLINE. Features. 0.5 Watt SMD Isolated Single or Dual Output. Derating-Graph (Ambient Temperature) DC/DC-Converter with 3 year Warranty
Features Unregulated Converter 1 : 1 Input Range.W SMD Package Efficiency up to 8% Approved for Medical Applications 1kVDC and 3 kvdc Isolation Option Operating Temperature from -4 C to +1 C with 3 year
More informationTEP 75WI Series, 75 Watt
TEP 75WI Series, 75 Watt Features UL 60950-1 Rugged, compact metal case Screw terminal adaptor available for easy connection EN 50155 approval for railway applications Optional DIN-rail mounting kit Ultra
More informationC B. Models. Ultra wide 4:1 input voltage 20 W DC/DC. edition and EN55032 class A
DC/DC Converter Ultra wide 4:1 input voltage 20 W DC/DC converter in a 1.6 x 1 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationEfficiency (typ.) Load VDC VDC ma ma(typ.) ma(typ.) μf %
FEATURES Smallest Encapsulated 10W Industrial Standard DIP16 Package Ultrawide 4:1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500VDC Operating Ambient Temp. Range 40 to 88 Low No
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 84% Fixed Operating Frequency Six-Sided Continuous Shield
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 84% Fixed Operating Frequency Six-Sided Continuous Shield Description The series wide input range / converters
More informationTEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter Measures: 2.40 x 2.28 x 0.50
Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 91% No minimum load Soft start Ajustable
More informationPT SERIES SIP Package
FEATURES Industry Standard SIP 8 Package 3 Watts Isolated Output 2:1 Input Range Regulated Outputs Up to 86 % Efficiency -40 C to +85 operating temperature range Remote On/Off logic control Continuous
More informationPXC05-Dual Output Series: DC/DC Converter Module 9 to 75 Vdc input, 3.3 to 15 Vdc Dual Outputs, 5W
PXC05-Dual Output Series: DC/DC Converter Module 9 to 75 input, 3.3 to 15 Dual Outputs, 5W UL UL60950-1 TUV EN60950-1 CB IEC60950-1 CE MARK Features Low profile: 1.25 x 0.80 x 0.40 inches (32.0 x 20.3
More informationTEP 100WIR Series, 100 Watt
TEP 100WIR Series, 100 Watt Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 92% No minimum
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Fixed Operating Frequency Six-Sided Continuous Shield
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Fixed Operating Frequency Six-Sided Continuous Shield Description The series / converters are certified
More informationPOWERBOX Industrial Line PMR20W Series 20W 4:1 Single and Dual Output High Performance DC/DC Converter
Features 2250VDC input to output isolation Standard 2.00 x 1.00 x 0.40 inch Six-sided continuous shield UL60950-1, EN60950-1, & IEC60950-1 safety approvals Compliance to EN50155 and en45545-2 railway standard
More informationShort Form Catalog. Semiconductor Circuits, Inc. Company Profile 2. Ordering and Warranties 3. Customs 4. Product Specifications 5
Short Form Catalog Semiconductor Circuits, Inc. Company Profile 2 Ordering and Warranties 3 Customs 4 Product Specifications 5 SC05N 5 Watts 5 SC10A 10 Watts 7 SC10B 10 Watts 9 SC10N (POL) 10 Amp 11 SC15A
More informationRipple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
More informationC B. Models. Operating up to 5000m altitude 5 year product warranty
DC/DC Converter Wide 2:1 input voltage 10 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1
More information20W DC-DC Converter P20H-Series
Wide 4:1 input range Efficiency up to 90 % Adjustable output voltage Remote control on / off 1500 V isolation Continuous short circuit protection Over voltage protection Standard package 2 x 1 x 0.4 MTBF
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM40-G)
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series / converters are
More informationModel No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationPOWERBOX Defense Line DAA/DAB/DAC Series 150W to several kws DC/DC Conduction Cooled. Preliminary
50W to several kws Preliminary Features,, 8, 7, 0VDC in packages 50, 00W, 500W utput from V to 8VDC Input filtering EN550 & transient protection Reverse polarity protection Several outputs, parallel or
More information1 V/ms V typ. Track input voltage: Pin 8 (See Note 6 & 7, page 3) ± 0.3 Vin
PTH00 5 Vin of 5 Total Power: 54 Watts # of Outputs: Single Special Features 5 A output current 5 V input voltage Wide-output voltage adjust 0.8 Vdc to 3. Vdc Auto-track sequencing* Margin up/down controls
More information20W DC-DC Converter P20J-Series
20W - Converter P20J-Series Wide 4:1 input range Efficiency up to 89 % Adjustable output voltage Remote control on / off 3000 V isolation Continuous short circuit protection Over voltage protection MTBF
More informationVP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationOutput Current Input Current Max. capacitive Load
AB4S/D Series AC/DC Power Module 4W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals -
More informationVin= 24VDC Vout= full load with normal start-up time, no external components with <1 second start-up time + diode protection circuit
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L*W*H=11.6*8.5*10.4mm) Wide input range (5V - 4V) Short circuit
More informationMPV1060RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1060RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 5W & 10W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse
More informationPin Dimension. Standoff Height 1:0.08
CBH Series Half Brick up to 250W/A The CBH series provides up to 250W/A outputs with industry standard half brick package. The efficient SR stage is combined with patented Buck Reset topology that would
More informationMPV1560RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1560RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 15W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse Input
More informationAPM-40 SERIES FEATURES PRODUCT OVERVIEW. Model Selection Guide. Input Specifications. AC/DC Power Module 40W, Industrial & Medical Safety
FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Version)
More informationEfficiency (typ.) (Range) VDC VDC ma ma(typ.) ma (typ.) ma(typ.) VDC μf % MKW15-12S05M. Output Current Input Current Reflected Ripple
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Range Fully Regulated Output I/O Isolation 40VAC with Reinforced Insulation, rated for 300VAC Working Low Leakage Current < 5µA Operating Ambient
More informationSeries AM4T-Z 4 Watt DC-DC Converter
FEATURES: RoHS compliant 24 Pin DIP Package Low profile metal package High efficiency up to 85% Operating temperature -40 to + 85 Input / Output isolation 1500 or 3500VDC Pin compatible with multiple manufacturers
More informationPT/PS SERIES SIP/SMD Package
FEATURES Industry Standard SIP or SMD Package 1 Watts of Output power 1500 Volts DC of isolation 10% input voltage ranges (5, 12, 24 Volts) Unregulated Outputs Up to 83 % Efficiency -40 C to +85 C temperature
More informationDescription. Protection Features. Operational Features. Mechanical Features. Control Features. Safety & EMC
48Vdc Input, 5Vdc@20A Output Eighth-brick DC-DC Converter AVO100-48S05B Description The AVO100-48S05B is a single output DC-DC converter with standard eighth-brick outline and pin configuration. It delivers
More informationDC Output Voltage range: 1V to 50V Current: up to 30A Power: up to 400W. Efficiency Typical 85-87% - (nominal line, full load, room temperature)
SERIES MINIATURE, HIGH DENSITY SINGLE OUTPUT DC / DC CONVERTERS Up to 400 W Applications Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features Miniature size High
More informationSeries AM20EW-NZ 20 Watt DC-DC Converter
FEATURES:0 Series AM0EW-NZ Models Single output Model Input Voltage (V) Efficiency up to 90% On/Off Remote Control Ultra-wide : Input range Over Voltage Protection No-load consumption 0.W I/Output Isolation
More informationAA20B 20 Watts. AA20BSeries
AA20B 20 Watts AA20BSeries Total Power 20 Watts Input Voltages 12V, 24V or 4V # of Outputs Single, Dual SPECIAL FEATURES Six-sided shielding Wide 2:1 / 4:1 input range Telecom models (-04L models) feature
More informationCPH a b c d - 70 XX X. Standoff Height 1:0.08
Half Brick up to 350W/100A The CPH series provides up to 350W/100A outputs with industry standard half brick package. The efficient SR stage is combined with patented Buck Reset topology that would reduce
More informationDC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, VDC RAILWAY APPLICATIONS
DC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, 14-160VDC RAILWAY APPLICATIONS FEATURES 60 Watt Output Power Extremely Wide 12:1 Input range: 9-75, 14-160 Output
More informationProtection (3) alternative Pinning Option (4) Single or Dual
Features Unregulated Converters Description Pot-core transformer - separated windings high.2kvdc basic isolation in compact size Optional continuous short circuit protection Efficiency up to 82% Pin compatible
More informationApplications Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial
M4268 6U VPX / VITA 62 COMPLIANT, SIX OUTPUTS DC/DC Up to 1200W CONVERTERS Applications Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features VITA 62 standard compliant
More informationIG480RW. Series. High Isolation IGBT Driver DC/DC Con vert ers.
IG480RW High Isolation IGBT Driver DC/DC Con vert ers Key Features: Operates With xx962 Drivers 4.8W Output Power Independent Outputs 3,000 Isolation Miniature DIP Case >1.0 MHour MTBF Short Circuit Protection
More informationWatts. xppower.com. General. Input. Output. Environmental. EMC & Safety. Compact Size. IT & Medical Approvals.
4- Watts ECM Series Compact Size xppower.com IT & Medical Approvals Convection-cooled Class I and II Construction DC Input Version Available (DCM Series) PoE Isolation Version Available (POE Series) 3
More informationYM12S05 DC-DC Converter Data Sheet VDC Input; VDC 5A
The Products: Y-Series Applications Intermediate Bus Architectures Distributed Power Architectures Data communications Telecommunications Servers, workstations Benefits High efficiency no heat sink required
More informationPackaging (5) Protection (3) Isolation Voltage (4)
Features Regulated Converters Regulated output with internal linear regulator Isolated.5W power in SMD package Up to 2kVDC isolation Industry standard pinout -4 C to + C operating temperature IEC/EN/UL62368-1
More informationSeries AM1S-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM1S-Z Models Single output Model Input Voltage (V) FEATURES: RoHS compliant Operating temperature -4 o C to + 85 o C 4 Pin SIP Package Input
More informationSeries AM1M-NZ 1 Watt DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Low Profile DIP case 1.5 and 3K V I/O Isolation Continuous Short circuit protection Max Input Current Full/No
More informationVCN60/70 Series High Effi ciency, High Current Density, 60 or 70 Amp Single Inline Package DC/DC Converters
www.murata-ps.com VCN/ Series High Effi ciency, High Current Density, or Amp VCNBADJTU-1C VCNBADJTU-1C DESCRIPTION Designed to support DDR1, DDR2 and DDR3 SDRAM memory power requirements, the VCN/ Series
More informationMPO-120S Series. Single Output, 180W Compact, Open Frame AC/DC Power Supplies. Key Features:
MPO-120S Series Single, 180W Compact, Open Frame AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved High Efficiency Five Single Models Meets EN
More informationFixed switching frequency (250 KHz) External synchronization capability Sync. out capability EMI/RFI filters included
M4244 SERIES MINIATURE, HIGH DENSITY, HIGH EFFICIENCY, SINGLE OUTPUT, DC/DC CONVERTERS (UP TO 550W) Applications Military (ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features Miniature
More informationRO- S/_ Protection (3) Isolation Option (4) Single
Features Unregulated Converters Industry standard pinout 1kVDC or 2kVDC isolation UL94 V- package material Fully encapsulated Efficiency up to 85% DC/DC Converter Description The DC/DC converters are typically
More informationDatasheet IC266_3 24Vin 110Vin / ±24Vout, 2x75W
intrexis AG Tobelraastrasse 4 CH-8212 Neuhausen am Rheinfall SWITZERLAND Tel +41 (0)525111190 www.intrexis.ch Fax +41 (0)525111199 info@intrexis.ch Datasheet IC266_3 24Vin 110Vin / ±24Vout, 2x75W Rev00
More informationPXC-M06xxW Dual Output Series: DC-DC Converter Module 9 ~ 36 VDC and 18~ 75 VDC input; ±5 to ±15 VDC Dual Output 6 Watts Output Power
PXC-M06xxW Dual Output Series: DC-DC Converter Module 9 ~ 36 VDC and 18~ 75 VDC input; ±5 to ±15 VDC Dual Output 6 Watts Output Power FEATURES DUAL OUTPUT UP TO ±600mA REINFORCED INSULATION FOR 250VAC
More informationSeries AM3G-NZ 3 Watt DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com 3 Watt - Converter 1500 and 3000V I/O Isolation Operating temperature -40 o C to o C Very low no load consumption Continuous Short circuit
More informationORDERING INFORMATION SEE PAGE 6
400W High Density Medical/Industrial Grade Open Frame Power Supplies Medical Safety Approval 60601-1 3rd Edition 2 MOPP Class 2 for home use medical applications (BSM400) Single output with 5V Auxiliary
More informationUH Series. Preliminary Data Sheet. 1/2 Brick 800W REFERENCED THERMAL IMAGES
UH Series 1/2 Brick 8W The UH series provides up to 8W/67A outputs with industry standard half brick package. The efficient SR stage is combined with patented Buck Reset topology that would reduce power
More informationRM- S/_ Protection (3) Isolation Option (4) Single
Features Unregulated Converters Single output rail Industry standard pinout 1kVDC or 2kVDC/1s basic isolation High efficiency for low power applications UL94V- package material Optional continuous short
More informationPackaging (4) Isolation Voltage (3) nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1D series -40 C to +95 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationRS2/RD2-E10/T10. RoHS. 1.0W Unregulated Dual Separate Output
.0W Unregulated Dual Separate Output we energize electronics! RS2/RD2-E0/T0 Pin SIL/ 4Pin DIL Package 000VDC Isolation Up to 3000VDC Isolation Low Ripple and Noise Efficiency up to 80% Operating Temperature
More informationAdvance Data Sheet: Metamere iad Series Non-isolated SIP Power Module
Metamere iad Series DC/DC Power Modules 6.0-14V Input, 16A Output SIP Power Module The iad Series offers an 80W power module in the industry s standard surface-mount footprint. The iad 1Vin series offers
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 4W PCB mount package
More informationOutput Current. Output Unit. Feature Set i 3A 4W 008 A 033 V R TDK- Lambda Dallas Technical Center. 8 Amps 3.3V Single. On/Off logic OCP Note
Ordering information Product Identifier Platform Input Voltage Current Unit Range # of Feature Set i 3A 4W 008 A 033 V 001 -R TDK- Lambda Dallas Technical Center Option Table Feature Set 19.1 x 23.4mm
More informationIndustrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
More informationSeries AME60-MJZ 60 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: I/O Isolation VAC Continuous Short circuit protection Input under-voltage protection Low
More informationParameter Condition Min. Typ. Max. Internal Input Filter. nom. Vin = 230VDC 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationDDR-120 series. 120W DIN Rail Type DC-DC Converter
is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, : SPECIFICATION MODEL OUTPUT INPUT PROTECTION OTHERS NOTE DDR-120A-12 DDR-120A-24 DC VOLTAGE RATED CURRENT
More informationSeries AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
More informationThe APR YE meets UL/CSA and all international safety requirements. It is SELV. Min Typ Max 90
APR-12-12-YE 12V Output, 12 Watts AC Front End FEATURES Wide input voltage range (9-264VAC) with active power factor correction Active current share Full protection; overvoltage, overcurrent and overtemperature
More informationTMP & TMPM Series, 4 to 60 Watt. Order code Output power max. Output Efficiency
TMP & TMPM Series, 4 to 60 Watt Features Ultra compact, low profile plastic casing Fully encapsulated (pollution/dust) Single-, dual- and triple output models standard package versions: - Screw terminal
More informationMPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
More informationIndustrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
More informationFDC20-48 S 05 W - HC PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC20-48 S 05 W - HC Series Name Input Output Output Input Assembly Option Voltage Quantity
More informationSimple but elegant look and ease of installation make it ideal for various industrial applications.
This LDD240-WU DC/DC converter is the optimal response to the applications where compactness and high reliability are requested. It is isolated and offers a wide range of input and output voltages. Simple
More informationML100SRI. Series. Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers. Key Features:
ML100SRI Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers Key Features: 1W Output Power Ultra-Miniature SMT Case 4,200 VDC Isolation Single & Dual Outputs -40ºC to +105ºC Operation Meets JEDEC
More informationSeries AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
More informationAdvance Data Sheet: iaf Series Non-isolated SMT Power Module. iaf Series DC/DC Power Modules V Input, 20A Output Surface Mount Power Module
iaf Series DC/DC Power Modules 4.5-4V Input, A Output Surface Mount Power Module iaf power modules perform local voltage conversion from any bus voltage in the 5V to V range. The iafa7v utilizes a low
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationSeries AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
More informationDC/DC Converter E_S-1WR2 & F_S-1WR2 series
1W, Fixed input voltage, isolated & unregulated dual/single output FEATURES Compact SIP package International standard pin-out High efficiency up to 81% Isolation voltage: 3K VDC Operating temperature
More informationMMA-15 series. 15W Medical Grade Ultraminiature Switching Power Supplies. Single / Dual / Triple Outputs. Universal 90 to 264VAC Input
Single / Dual / Triple Outputs Universal 90 to 264VAC Input 3.3VDC to 24VDC Outputs Chassis 3.96 L x 2.16 W x 1.0 H 4,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals
More informationDatasheet. ACF-10 Series AC/DC Power Module 10W
Datasheet ACF-10 Series AC/DC Power Module 10W The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for
More information-48 VDC Input. ETSI Compliant. NEBS Compliant. Convection-cooled. Covered Versions Available
DCM Series Open Frame Telecom DCDC Converter 48 VDC Input ETSI Compliant NEBS Compliant Convectioncooled High Power Density in Small Package Sizes Covered Versions vailable The DCM family complements the
More informationSeries Specifications Ta= 25 C, nom. Vin, full load and after warm-up unless otherwise stated) Parameter Condition Min. Typ. Max.
Features Regulated Converter Universal input VAC 4W PCB mount package
More informationEnclosed Power Supplies
, 15 150 Watt Features Very compact metal cased power supplies High operating temperature up to 70 C Low no load power consumption
More informationTMF SERIES: 1U HOT-SWAP POWER SYSTEM Single Output 400 Watt Modules with PFC
Call U.S.: +1(954) 346-2442 sales@unipower-corp.com Call U.K.: +44(0) 1903 768200 info@unipower-europe.com TMF SERIES: 1U HOT-SWAP POWER SYSTEM Single 400 Watt Modules with PFC MODULE FEATURES Only 1U
More informationDDR-120 series. 120W DIN Rail Type DC-DC Converter
DIN Rail Type DC-DC Converter + is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION
More information