ISO STAR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #1... ISO #3
|
|
- Sherman O’Brien’
- 6 years ago
- Views:
Transcription
1 ISO STR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #... ISO #3 Specially coated glandless spool and sleeve for long life vailable with integral flow regulators on ISO # & #2 sizes ow power solenoids and manual override as standard Wide range of sub-bases and accessories THI T edium: ompressed air, filtered, lubricated, non lubricated and dry Operation: aximum 6 bar, see table for individual details low: ISO # 230 l/min ISO # l/min ISO # l/min mbient temperature: solenoid models pilot models onsult our Technical Service for use below +2. TRIS ody: die-cast aluminium Spool & sleeve: hard anodized aluminium with special Teflon coating Seals: nitrile dditional ranges - ISO 4 (see page 3-2) 5/2 Solenoid actuated valves Symbol ctuation low low regulator OS nd solenoid models OO solenoid models Sol/Spring ISO # 230, SX /, SX 9573-Z7-8/ Sol/Spring ISO # 230 uilt-in, SX /, SX 9573-Z8-8/ Sol/Spring ISO #2 2450, SX /, SX 9574-Z7-8/ Sol/Spring ISO # uilt-in, SX /, SX 9574-Z8-8/ Sol/Spring ISO #3 4400, SX /, SX 9575-Z7-8/ Sol/ir spring ISO # SX /... 0 SX 9573-Z70-60/ Sol/ir spring ISO # 230 uilt-in... 0 SX /... 0 SX 9573-Z80-60/ Sol/ir spring ISO # SX /... 0 SX 9574-Z70-60/ Sol/ir spring ISO # uilt-in... 0 SX /... 0 SX 9574-Z80-60/ Sol/ir spring ISO # SX /... 0 SX 9575-Z70-60/ Sol/Sol ISO # SX / SX 0573-Z50-8/ Sol/Sol ISO # 230 uilt-in SX / SX 0573-Z60-8/ Sol/Sol ISO # SX / SX 0574-Z50-8/ Sol/Sol ISO # uilt-in SX / SX 0574-Z60-8/ Sol/Sol ISO # SX / SX 0575-Z50-8/ Insert voltage codes for standard or OO model from correct table below. Order connector plugs separately. anual override on end solenoid models: Push to operate spring return, lockable. anual override on OO solenoid models (-60/): Screwdriver memory type. anual override on OO solenoid models (-8/): Push to operate spring return. or further information 3-0
2 5/3 Solenoid actuated valves Symbol ctuation low low regulator OS nd solenoid models OO solenoid models P ISO # 230 uilt-in SX / SX 9673-Z60-8/ P ISO # uilt-in SX / SX 9674-Z60-8/ P ISO # SX / SX 9675-Z50-8/ O ISO # 230 uilt-in SX / SX 9773-Z60-8/ O ISO # uilt-in SX / SX 9774-Z60-8/ O ISO # SX / SX 9775-Z50-8/ OP ISO # 230 uilt-in SX / SX 9873-Z60-8/ OP ISO # uilt-in SX / SX 9874-Z60-8/ OP ISO # SX / SX 9875-Z50-8/ P = ll Ports locked, O = entre Open xhaust, OP = entre Open Pressure. Service kits not available for these valves. Insert voltage codes for standard or OO model from correct table below. Order connector plugs separately. anual override on end solenoid models: Push to operate spring return, lockable. anual override on OO solenoid models (-60/): Screwdriver memory type. anual override on OO solenoid models (-8/): Push to operate spring return. Voltage codes & spare coils for 0 bar solenoid models Voltage 22 mm oil with connector interface acc. to Industrial Standard 22 mm oil with connector interface acc. to I table 30 mm oil with connector interface acc. to I table ode Power inrush/hold ode Power inrush/hold ode Power inrush/hold 2 V d.c. 2 2 W Q/48/2/2 2 2 W V ,5 W V V d.c. 3 2 W Q/48/3/2 3 2 W V ,5 W V V 50/60 Hz 4 4/2,5 V Q/48/4/2 4 2 V V V V /20 V 50/60 Hz 8 4/2,5 V Q/48/8/2 8 4/2,5 V V V V /240 V 50/60 Hz 9 6/5 V Q/48/9/2 9 6/5 V V V V Voltage codes & spare coils for 6 bar models (OO only) Voltage 30 mm oil with connector interface acc. to I table ode Power inrush/hold 24 V d.c W V /20 V a.c V V V a.c V V /2 ir pilot actuated valves Symbol ctuation low low regulator pressure (bar) OS TRI TIS OR & OO SOOI OPRTORS Voltage tolerances ±0% Rating 00%.. Inlet orifice,0 mm lectrical connection orresponding to chosen coil. See voltage code tables Solenoid coil ay be rotated at 90 intervals Protection class IP 65 with sealed plug (ISO 6952) 5/3 ir pilot actuated valves Symbol ctuation low low regulator pressure (bar) OS Pilot/Spring ISO # 230-0, SXP Pilot/Spring ISO # 230 uilt-in -0, SXP Pilot/Spring ISO # , SXP Pilot/Spring ISO # uilt-in -0, SXP Pilot/Spring ISO # , SXP Pilot/Pilot ISO # 230-0, SXP Pilot/Pilot ISO # 230 uilt-in -0, SXP Pilot/Pilot ISO # , SXP Pilot/Pilot ISO # uilt-in -0, SXP Pilot/Pilot ISO # , SXP P ISO # 230 uilt-in -0, SXP P ISO # uilt-in -0, SXP P ISO # , SXP O ISO # 230 uilt-in -0, SXP O ISO # uilt-in -0, SXP O ISO # , SXP OP ISO # 230 uilt-in -0, SXP OP ISO # uilt-in -0, SXP OP ISO # , SXP P = ll Ports locked, O = entre Open xhaust, OP = entre Open Pressure. Service kits not available for these valves. 3-
3 ISO STR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #... ISO #3 OPTIO STOR SX Valve function 5/2 I solenoid/solenoid 05 5/2 O solenoid/air spring or solenoid/spring 95 5/3 P solenoid/solenoid 96 5/3 O solenoid/solenoid 97 5/3 OP solenoid/solenoid 98 ISO size ISO 2 3 ISO 2 4 ISO 3 5 Voltage code or voltage code please see tables on page 3- anual override ockable 0 on lockable Pressure 0 bar 6 6 bar 8 Valve options OO solenoid pilot actuated valves nd solenoid pilot actuated valves Z Pilot supply Internal pilot supply (double sol or air spring return) 0 Internal pilot supply (single sol) Regulation Without regulation (double sol valve) 5 With regulation (double sol valve) 6 Without regulation (single sol valve) 7 With regulation (single sol valve) 8 U/ dditional range ISO 4 Solenoid actuated valves ctuation low pressure (bar) OS 24 Push only manual override 220 Push only manual override Sol/ir Spring ISO ,5...0 U/22456/72/6/3 U/22456/72/6/ Sol/Sol ISO U/22456/23/6/3 U/22456/23/6/9 P ISO ,8...0 U/22456/623/6/3 U/22456/623/6/9 ir pilot actuated valves ctuation low OS ir/spring ISO ,9..6 U/22456/ ir/ir ISO ,9..6 U/22456/3 4 2 P ISO ,9..6 U/22456/63 O ISO ,9..6 U/22466/63 P = ll Ports locked, O = entre Open xhaust 3-2
4 SS V sub-bases orm Side ported orm ottom ported orm anifold orm nd plates orm onnecting plate lanking disk ISO# /P926 (/4) /P925 (/4) Q/2252/3/2 Q/2252/3/22 P 836 P 8382 ISO#2 /P932 (3/8) /P93 (3/8) Q/22253/3/2 Q/22253/3/22 P 846 P 8482 ISO#3 /P938 (/2) /P937 (/2) Q/22354/3/2 Q/22354/3/22 P 856 P 8582 ISO#4 /P944 Q/22456/3/2 Q/22456/3/22 Universal base options (side and bottom ported) odular base lanking disc (dual supply) nd plates nd plate, side ports open ISO# Q/2252/3/27 (/4) /P4373 Q/2252/3/28 (3/8) Q/2252/3/3 ISO#2 Q/22253/3/27 (3/8) /P4374 Q/22253/3/28 (/2) Q/22253/3/3 ll ports supplied blanked for optimum system configuration SSORIS Single pressure regulator plate Single pressure regulator plate Single pressure regulator Single pressure regulator low regulator plate ISO # V700- Port reg. V702-2 Port 2 reg. V702-3 Port 4 reg. V702-4 Ports 2+4 reg. - ISO #2 V700- Port reg. V702-2 Port 2 reg. V702-3 Port 4 reg. V702-4 Ports 2+4 reg. - ISO #3 V700- Port reg. V702-2 Port 2 reg. V702-3 Port 4 reg. V702-4 Ports 2+4 reg. Q/22354/3/26 3-3
5 ISO STR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #... ISO #3 22 mm Plugs according to Industrial Standard or I Table onnector Type able length Voltage a.c. d.c. eatures OS Plug with moulded cable 22 mm Industrial standard 3000 mm 250 V 250 V /P4333/3 Plug with cable gland 22 mm Industrial standard V V /P9063 Indicator plug 22 mm Industrial standard V V amp /P242/ Indicator plug 22 mm Industrial standard V V eon /P242/2 Indicator plug 22 mm Industrial standard V V eon /P242/3 Indicator plug with moulded cable 22 mm Industrial standard 000 mm 24 V 24 V,VR /P4334/ Indicator plug with moulded cable 22 mm Industrial standard 3000 mm 24 V 24 V,VR /P4334/3 Indicator plug with moulded cable 22 mm Industrial standard 000 mm 0 V 0 V,VR /P4334/2 Indicator plug with moulded cable 22 mm Industrial standard 3000 mm 0 V 0 V,VR /P4334/23 Indicator plug with moulded cable 22 mm Industrial standard 000 mm 220 V 220 V,VR /P4334/3 Indicator plug with moulded cable 22 mm Industrial standard 3000 mm 220 V 220 V,VR /P4334/33 ight emitting gasket 22 mm Industrial standard V V reen /P40859 ight emitting gasket 22 mm Industrial standard V V reen /P40886 ight emitting gasket 22 mm Industrial standard V V reen /P mm Plugs according to I Table onnector able length Voltage a.c. OS Plug with moulded cable 000 mm 250 V 250 V /P4335/ Plug with moulded cable 3000 mm 250 V 250 V /P4335/3 d.c. eatures Plug with cable gland 250 V 300 V /P5737 Plug with cable gland 240 V /P97 Plug with cable gland 250 V 300 V Plug with cable gland V V Plug with cable gland V V Indicator plug V V amp /P2420/ Indicator plug V V eon /P2420/2 Indicator plug V V eon /P2420/3 Indicator plug with moulded cable 000 mm 24 V 24 V,VR /P4336/ Indicator plug with moulded cable 3000 mm 24 V 24 V,VR /P4336/3 Indicator plug with moulded cable 3000 mm 0 V 0 V,VR /P4336/23 Indicator plug with moulded cable 000 mm 220 V 220 V,VR /P4336/3 Indicator plug with moulded cable 3000 mm 220 V 220 V,VR /P4336/33 ight emitting gaskets V V reen /P4086 ight emitting gaskets V V reen /P40880 ight emitting gaskets V V reen /P
6 ISIOS Single end solenoid models ouble end solenoid models Single and double pilot models H H low regulators low regulators anual override O low regulators anual override ISO# ISO#2 ISO# , ,5 8, ,5 H , O ,4 ISO# ISO#2 ISO# ,5 8, ,5 H ISO ISO 2 ISO 3 Single ouble Single ouble 88,5 92, , , Single OO solenoid valves ouble OO solenoid valves H P R 33 ISO# ISO#2 ISO# , ,5 7,5 8,5 H , P R S ,4 H P R ISO ISO 2 ISO ,5 7,5 8,5 H , P R anual override low regulator (not on ISO #3 model) S low regulator (not on ISO #3 model) anual override 3-5
7 ISO STR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #... ISO #3 V Sub-bases Side ported Universal sub-base options odular base with side, end and bottom ports open Q/2252/3/27, Q22253/3/ H 2 2 ISO b d d2 d3 h h2 h3 h /P ,5 /4 / ,5 (2,5) 23, /P ,6 3/8 / (26) /P ,6 /2 / imension for ports 3 & 5 ISO H kg ,5 /4 / , ,5 3/8 / ,35 ottom ported Universal end plate, all ports blocked Q/2252/28, Q/22253/3/28 Universal end plate, side ports open Q/2252/3/3, Q22253/3/3 P 3//5 3/5 Q S P 3/5 3/5 3/5 ISO b b b2 d d2 d3 d4 h h2 h /P ,5 /4 /8 5, /P ,6 3/8 /8 6,6 3 6, /P ,6 /2 /8 6, O R ISO 0 P Q R S T kg ,5 22 3/8 / , ,5 29 /2 / ,23 T rill dimensions for opening ports /4 Ø 8 3/8 Ø 5 /2 Ø 5 3-6
8 nd plates and manifold Transition plate from ISO # to ISO #2 universal sub-bases Q/2252/3/29 Z Y lanking disk for ISO # & ISO #2 universal sub-bases /P4373, /P4374 ISO H I h h3 h4 5 d ,5 7, ,5 26 / / / / / aximum 2 stations Sandwich plate with pressure regulator on port ISO ISO 2 ISO Regulator on side 2 Regulator on side 4 aptive screws 5 x 20 Y = odel with centre back gauge Z = odel with bottom gauge View (without gauge and tube) Sandwich plate with pressure regulator on port 2 or port 4 ISO ISO 2 ISO Port 2 reg. Y Z Port 4 reg. View (without gauge and tube) Y = odel with centre back gauge Z = odel with bottom gauge Sandwich plate with double pressure regulator on port 2 & 4 ISO ISO 2 ISO aptive screws 5 x 20 Y = odel with centre back gauge Z = odel with bottom gauge Y Z 3-7
ISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
More informationISO*STAR - ATEX version (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR - TX version (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder
More informationVCB22, 5/2 Solenoid actuated In-line spool valves
, / olenoid actuated nline spool valves >> ort size:, /... / ( ) >> ew design for industrial automation >> igh flow rate >> onnector with light as standard >> aintenancefree >> ubbase system for easy assembly
More informationStandardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
More informationSPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
More informationV03, V04 and V05 Series
V03, V04 and V05 Series / and 3/ Poppet Valves Electrically Actuated G 1 8, G 1 4, CNOMO and Interface Extensive range of power and orifice size options Removable coil Manifold rail for 1 to 0 valves Operating
More information26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
More informationVAL-2. Plug-in Mini ISO Valves 2x2/2, 2x3/2, 5/2 and 5/3 valves ISO , Size 18 mm. Technical data
Valve Manifolds VS8 Series x/, x/, 5/ and 5/ valves ISO 507-, Size 8 mm V DC or 5V AC Multipole Integrated Fieldbus Field expandable with single addon stations Dual spool technology VS8G Glandless spool
More informationFlow. (l/min) (ms) N/en
66, 87 Inline / & / spool valves electromagnetic actuated, indirectly controlled G / & G / For single and double operated actuators Manual override with and without detent imple design of soft seal spool
More informationVALVES Inline 3/2-, 5/2- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
975 Inline 3/-, 5/- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Closed crossover design Add-on manual override Rectified
More information97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
More information97105 NAMUR. Technical data. Ordering information and accessories See page 6 and 7
90 NAMUR /, / and / directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /, / NPT, G /, / NPT NAMUR-interface For single and double operated actuators
More information/2 way indirect solenoid operated valves G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 / way indirect solenoid operated valves G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to SIL (IE 6508) dd-on manual
More information26230, Inline 3/2, 5/2 and 5/3 way soft seal spool valves electromagnetic actuated, indirectly controlled G 1/4, G 1/2
/, / and / way soft seal spool valves electromagnetic actuated, indirectly controlled /, / traight-through flow, high v-factor tandard manual override ompact design asily interchangeable solenoid system
More information26360, NAMUR. Technical data
66, 87 NAMUR /-, /- and / directional control valves Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G/ NAMUR-Interface For single and double operated actuators Manual
More information5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4
5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4 Products 5/2 Directional-control valve, single valve, electrical connection M8 (4 poles) 5/3 Directional-control valve, single valve, electrical
More information98025 NAMUR 3/2 poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR / poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to
More informationsize size
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
More information3/2 Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G/, / NPT or flanged with NMUR interface Main application: single operated process actuators TÜV-approval
More information97105 Inline 3/2, 5/2 & 5/3 way spool valves electromagnetic actuated, indirectly controlled G1/4, 1/4 NPT, G1/2, 1/2 NPT
70 Inline 3/, / & /3 way spool valves electromagnetic actuated, indirectly controlled G/, / NPT, G/, / NPT Main application: single and double operated actuators TÜV-approval based on type examination
More informationV88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
More information26360, 80207, 3/2, 5/2 & 5/3 Indirect solenoid actuated spool valves
66, 87, /, 5/ & 5/ > > Port size: G/ & G/ > > Compact design > > Easily interchangeable solenoid > > tandard manual override > > ll valves available with Ex protected coils (TEX or other international
More informationTechnical features. N/en
/, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface For single and double operated actuators Exhaust air recirculation at way
More information97105 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
705 Inline 3/, 5/ & 5/3 spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Valves for safety systems up to SIL (IEC 6508) Crossover-free
More informationTechnical features. 12/ f. N/en
/, / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface Main application: single and double operated actuators TÜV-approval based
More information80265 series, 3/2 Indirect solenoid actuated poppet valve
> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,
More information97105 NAMUR, 3/2, 5/2 & 5/3 Indirect electromagnetic actuated spool valves
970 NAMUR, /, / & / > > Port size: / or / ISO G/NPT > > Main application: single and double operated actuators > > TÜV-approval based on type examination DIN EN, DIN 9 and IEC 08 > > Valves for safety
More information6215L Inline & NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
L Inline & NMUR series, / & / > Port size: / (ISO /NPT) or flanged with NMUR interface > Suited for outdoor use under critical environment conditions (see solenoid list) > Variable valve solenoid combination
More informationSeries EVS7-6/7-8/7-10
onforming to ISO Standard Solenoid Valve (with M onnector) Series EVS7-6/7-8/7-0 (Size ) (Size ) (Size ) VK VZ VF VFR V VZS VFS VS VQ7 Large capacity Flow rate EVS7-6 (Size ) 00 l/min (NR) EVS7-8 (Size
More informationPreparation Units for Compressed Air. Modular construction Compact design Simple mounting Corrosion-resistant casings 1032 AL
L Preparation Units for ompressed ir Modular construction ompact design Simple mounting orrosion-resistant casings Maintenance devices for compressed air are put together according to need from the individual
More informationV88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
More informationHERION SERIES Indirect solenoid actuated spool valves
HERION SERIES Indirect solenoid actuated spool valves for single and double acting actuators with NAMUR interface /2, /2, /, NC/APB, G/, G/2 Valves for safety systems up to SIL (IEC 08) Crossover-free
More informationPilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC
D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common
More informationV50-53 SERIES IN-LINE VALVES
V50-53 SERIES IN-LINE VALVES VALUE ENGINEERED HIGH FLOW IN-LINE VALVES 02 V50-53 VALVE ADVANTAGE INTRODUCING THE NEW V50-53 IN LINE VALVE SERIES NORGREN ENGINEERS ARE DEVELOPING PRODUCTS THAT ARE DIRECTLY
More informationValve terminal RE-10 with Multi-pin, AS-Interface or bus connection 4 12 valve stations, 300 Nl/min (0.305 Cv)
Type of connection = AS = B1 = B6 Order code RE-10/08-M-1-060 Series Number of stations Multi-pin: 4, 6, 8, 10, 12 Bus versions: 4, 8, 12 Electrical options M-1 = Multi-pin D-Sub plug AS3 = AS-Interface
More informationElectropneumatic miniature control valves Mounting Connectors Minisolenoid valves Indicators LED seals LED Valve modules Poppet 3/2 single pilot 4/2 s
ElectroPneumatic Miniature Control Valves Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com /47 Electropneumatic miniature control valves Mounting Connectors Minisolenoid
More information3/2 Directional control valves Direct solenoid operated poppet valves Internal thread G 1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Direct solenoid operated poppet valves Internal thread G /, / NPT or flanged with NAMUR interface Main application: single operated actuators for plants TÜV-approval based
More informationTH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information
Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18
More informationMPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
More informationOperating pressure. N/en/en
660, 8007 NAMUR /, / & / way spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple
More informationOperating pressure. N/en/en
660, 8007 NAMUR /, / & / spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple design
More informationRemote Process Actuation Control System AirLINE PHOENIX INLINE
Remote Process Actuation Control System AirLINE PHOENIX INLINE Type 8644 can be combined with... Fully compatible with Phoenix Inline System Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationPilot kick type 2 port solenoid valve : Normally closed,normally open GENERAL PURPOSE VALVE ADK11 ADK12 SERIES
K11 K1 Series Pilot kick type port solenoid valve : Normally closed,normally open NRL PURPS VLV K11 K1 SRIS iaphragm structure Port size : Rc1/, Rc3/, R1/, R3/, R1 JIS symbol K11(normally closed) UT K1(normally
More informationHow to Order. Manual override. : Non-locking push style. E: Push-turn locking lever style. Electrical entry
SY000/000/7000 Base Mounted Valve Single Unit 1 SY 2 40 Series SY000 SY000 7 SY7000 L How to Order A/B port size Symbol Post size Applicable series Without subplate Rc(PT) 1 8 01 SY000 With subplate Rc(PT)
More informationOperating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up
More informationFlow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
More informationRemote Process Actuation Control System AirLINE PHOENIX INLINE
Remote Process Actuation Control System AirLINE PHOENIX INLINE Type 8644 can be combined with... Fully compatible with Phoenix Inline System Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationPRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS.
MESSKO MPreC PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS. MESSKO MPreC -Series LARGE MESSKO PRESSURE RELIEF DEVICE (LMPRD) Operating pressure Project/Reference: Gasket material MPreC Typ 4 psi; 0.28
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 1300 Individual mounting Series sub-base plug-in 35 100 Pilot air accumulator Internal pilot supply check valve Moisture and dust seal Manual operator
More informationMaterial Seat seal. N/en
0 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR interface TÜV-approval based on IEC 6 8 Valves for safety systems up to SIL Standard NAMUR type - redundancy:
More information98015 series, 3/2 Direct solenoid actuated poppet valve
90 series, / > Port size: / & / (ISO G/NPT), NAMUR Interface > Main application: Single acting actuators > TÜV-approval based on type eamination DGRL 9//EG and IE 0, multichannel up to SIL > Optional add-on
More informationFeatures. Specification. Model. Tube I.D. (mm) Medium Operating pressure range. Proof pressure. Ambient temperature. Available speed range
series eatures Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion
More informationPressure control valves type B
Pressure control valves type B Burner Components Catalogue 1 Contents Application... page 2 Design... page 2 Exploded view... page 2 Function... page 2 Technical data... page 3 p-q table... page 3 Dimension...
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationINDUSTRIAL PNEUMATICS - valves
Ball valves Mini ball valve 6560 type Body material: Ball material: Ball seal: Spindle seal: Working temp.: Nickel-plated brass Chromium-plated brass PTFE NBR From -20 C up to +80 C General purpose valve
More informationMultipole and Fieldbus
> Series 3 Plug-In valve islands Valve Islands > 016 Series 3 Plug-In valve islands, Multipole and Fieldbus New versions Plug-In system for Series 3 solenoid valves, G1/8 port. Valve functions: x3/, 5/
More informationH.A. Phillips Inventory Overstock Liquidation List
H.A. Phillips Inventory Overstock Liquidation List ALL PRICES HAVE BEEN REDUCED All Items subject to verification of stocking. Items are sold as is. Please contact the factory (630-377-0050) for more information.
More information10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled
ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of
More informationAir Mask. Medium Pressure (3000 psi) NFPA Edition Compliant PARTS LIST
Air Mask PARTS LIST Medium Pressure (000 psi) NFPA - 00 Edition Compliant TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece
More informationSPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 59 Individual mounting Series inline 35 100 Ext. pilot port Accumulator EXH. Pilot valve Function plate From accumulator Pilot exhaust To accumulator
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
More informationSHORT-STROKE CYLINDER SERIES SSCY, Ø mm AND ACCESSORIES
SO-SO CYI SIS SSCY, -00 mm CCSSOIS Compact cylinders suitable for installation in limited spaces: configuration with or without magnet single or double-acting - single or through-rod anti-rotation version
More informationControl block EDC Modular Directional Valve Flow Sharing System
Control block EDC Modular Directional Valve Flow Sharing System 2 Control block EDC Modular Directional Valve Flow Sharing System osch Rexroth Oil Control S.p.. introduces the EDC size 06 dvantages directional
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55
More informationRH 658 L, 658 LS, 658 L-01
RH 658 L, 658 LS, 658 L0 Spare parts list Rock drills 00 Atlas Copco Construction Tools AB No. 9800 08 0 000609 RH 658 L, 658 LS, 658 L0 Contents Contents General information................................................................
More information24011 series, 3/2 Direct solenoid actuated poppet valve
0 series, / > Port size: / (ISO G or NPT), NAMUR Interface > Add-on manual override or inductive limit switches on request > Main application: Single and double acting actuators > TÜV-approval based on
More informationPneumatic Control Unit for the integrated mounting on process valves
Pneumatic Control Unit for the integrated mounting on process valves Type 890 can be combined with Compact design Pilot valve with high air flow rate Internal control air channel Optical position indicator
More informationSCVA08, SCVA10, SCVA20 & SCVA32, 3/2 Solenoid actuated safety valve
SCV0, SCV0, SCV & SCV, / > > Port size: /4, /, /4 and (ISO G, NPT) > > Range of sizes - DN, 0, and > > Redundant valve assembly, pneumatic self monitoring with integrated safety silencer > > Ensures safe
More information10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationMechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact stainless
More informationElectromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
More informationSpare parts manual. SAB Screw compressor unit
Spare parts manual en SAB 120-151 Screw compressor unit Contents 1. Service parts list SAB 120/151 2 1.1.1 How to use the spare parts list 2 1.1.2 Recommended spare parts 4 1.1.4 General arrangement SAB
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationINDIAN INSTITUTE OF TECHNOLOGY KANPUR DEPARTMENT OF COMPUTER SCIENCE & ENGG
INDIAN INSTITUTE OF TECHNOLOGY KANPUR DEPARTMENT OF COMPUTER SCIENCE & ENGG To M/S IITK/CSE/208-9/56 27 th July 208 Sub. Quotation for Modular Manufacturing System We are interested in purchasing the following
More informationSpare parts manual. SAB Screw compressor unit
Spare parts manual en SAB 193-233-283 Screw compressor unit Contents 1. Spare parts list SAB 193/233/283 4 1.1.1 How to use the spare parts list 4 1.1.2 Recommended spare parts 6 1.1.3 General arrangement
More informationValve island VS18/VS26 with PROFINET Interface. Operation & Service Manual
Valve island VS18/VS26 with PROFINET Interface Operation & Service Manual Change history: The Change history reflects all changes of the Operation & Service Manual, which were done after the initial release.
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integd mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up by automatic
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8691 can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
More informationDual rod cylinder with guide function for pick & place applications.
ual Rod ylinder Series XS ø, ø, ø, ø, ø, ø32 ual rod cylinder with guide function for pick & place applications. Series XS Twice the thrust on-rotating accuracy ±. X TS Y Y G X - - ata all bushing bearings
More information2005 / 2012 / 2035 Series
Generail Information on Fieldbus Systems FEATURES Solenoid air operated valve manifolds for date exchange via fieldbus. Internal wiring by Z-Board plug-in system. Plug-together flexibility due to different
More informationBlock diagram MB-VEF
0 0 Functional description Gas flow. If the valves and are closed, chamber a is under input pressure up to the double seat of valve.. A hole in the filter housing of MB-.../0 connects min. pressure switch
More informationTL Laser Systems for Tool Measurement
TL Laser Systems for Tool Measurement Tool monitoring with a TL laser system is a very flexible solution. The contact-free optical measurement enables you to check even the smallest tools rapidly, reliably
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8695 can be combined with Compact stainless steel design Integrated analog valve position registration (Teach function) Coloured illuminated
More informationAir Mask PARTS LIST High Pressure
Air Mask PARTS LIST High Pressure TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece Blank Type Small Medium Large Hycar 00
More informationM3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
More informationElectro-Pneumatic Training System
8075-20 Electro-Pneumatic Training System LabVolt Series Datasheet Festo Didactic en 01/2018 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2 List of Equipment 2 List of
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Automatic teach function Contact-free position sensor Compact stainless steel design AS-Interface
More informationB64G - Olympian Plus plug-in system Filter/regulator
BG - Olympian Plus plug-in system > > Port size: /... / (ISO G/PTF) > > High efficiency water removal > > Diaphragm and balanced valve design ensure good regulation characteristics > > on-rising adjusting
More informationOld documentation - Only for your information! Product is not available anymore!
Double solenoid valve Control and safety combination valve Servo pressure controller - / 7. Printed in Germany Rösler Druck Edition 0.08 Nr. 09 8 Technical description The DUNGS multiple actuator DMV-SE...
More informationSystem family AP. Safety switch CET.-AP- With guard locking
System family P Safety switch ET.-P- With guard locking at. 4 PLe Safety switch with guard locking Locking force up to 600 N Metal housing Diagnostics via 4 LEDs Notice The device is only allowed to be
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E06620N
More informationControl head for hygienic process valves
for hygienic process valves Type can be combined with... Universal attachment for hygienic process valves Contactless position measurement system with 3 switching points (Teach-In function) Coloured status
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 57 Individual mounting Series inline 35 To accumulator Sealed solenoid enclosure 100 200 Ext. pilot port Pilot valve Function plate From accumulator
More informationICO3S - 2/2, 3/2 or 5/2 poppet valves Electromagnetically actuated, direct solenoid operated
ICOS - /, / or / poppet valves > > Port size: /... / (ISO G / NPT) Namur or manifold > > Control of pneumatic or hydraulic operated equipment > > Direct acting solenoid valve > > High flow > > bar inlet
More informationFluid Cooling Shell & Tube UC / UCV Series
luid ooling Shell & Tube U / UV Series 0916 ST & STISS ST OSTUTIO erformance otes Steam & large temperature differentials U tube emovable tube bundle for servicing educes thermal expansion stresses 3/8"
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
More information