Motor Control and Power Distribution. ATI Systems. International:

Transcription

1 Motor Control and Power Distribution International: GaljoenStreet,Wadeville Trade Enquiries Welcome ATI Systems

2 ELSTEEL Enclosure - Mild Steel Mild Steel orange wall-mounting enclosure Door opens to left or right IP enclosure Supplied with aluzinc mounting plate and wall mounting brackets Colour : Orange (RAL 2000 Texture) ESOT Part No. Description Type ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B ESOT B MS BOX 200x200x150 IP MS BOX 200x300x150 IP MS BOX 250x300x150 IP MS BOX 300x300x150 IP MS BOX 300x300x200 IP MS BOX 300xx150 IP MS BOX 300xx200 IP MS BOX xx200 IP MS BOX x500x200 IP MS BOX x500x250 IP MS BOX x600x200 IP MS BOX 500x500x200 IP MS BOX 500x700x200 IP MS BOX 500x700x250 IP MS BOX 600x600x200 IP MS BOX 600x600x300 IP MS BOX 600xx200 IP MS BOX 600xx250 IP MS BOX 600xx300 IP MS BOX xx300 IP MS BOX x1000x250 IP MS BOX x1000x300 IP MS BOX x1200x300 IP BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX 2, (V2)/2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) / 2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2) /2000 FINE TX BOX (V2)/2000 FINE TX BOX (V2)/2000 FINE TX BOX (V2)/2000 FINE TX Mild Steel grey wall-mounting enclosure Door opens to left or right IP enclosure Supplied with aluzinc mounting plate and wall mounting brackets Colour : Grey (RAL 7035 Texture) ESGT Part No. Description Type ESGT ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B ESGT B MS BOX 200x200x150 IP MS BOX 200x300x150 IP MS BOX 250x300x150 IP MS BOX 300x300x150 IP MS BOX 300x300x200 IP MS BOX 300xx150 IP MS BOX 300xx200 IP MS BOX xx200 IP MS BOX x500x200 IP MS BOX x500x250 IP MS BOX x600x200 IP MS BOX 500x500x200 IP MS BOX 500x700x250 IP MS BOX 600x600x300 IP MS BOX 600xx300 IP MS BOX xx300 IP MS BOX x1000x250 IP MS BOX x1000x300 IP BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX 2, (V2)/7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2) /7035 FINE TX BOX (V2)/7035 FINE TX BOX (V2)/7035 FINE TX All bold items in stock.

3 ELSTEEL Accessories Accessories Part No. Description Type BCOV PAD LOCKABLE BOX LOCK COVER BCOV BCOV Mild Steel Inner door white RAL 9010 Supplied with mounting material Colour: white ID Part No. Description Type ID 3.3 ID 3.4 ID 4.5 ID 4.6 ID 5.7 ID 6.6 ID 6.8 INTERNAL DOOR INTERNAL DOOR 300 INTERNAL DOOR 500 INTERNAL DOOR x 600 INTERNAL DOOR INTERNAL DOOR INTERNAL DOOR 600 ID 3.3 ID 3.4 ID 4.5 ID 4.6 ID 5.7 ID 6.6 ID 6.8 All bold items in stock.

4 ELSTEEL Terminal Boxes - Mild Steel Mild Steel Terminal Boxes Part No. EST EST EST EST EST EST EST EST EST EST EST Description TERMINAL BOX - MS - V2 150 X 150 X 80 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 300 X 150 X 80 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 200 X 200 X 80 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 300 X 200 X 80 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 150 X 150 X 120 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 175 X 175 X 120 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 300 X 150 X 120 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 200 X 200 X 120 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 300 X 200 X 120 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 X 200 X 120 mm RAL 7035 Fine Textured TERMINAL BOX - MS - V2 300 X 300 X 120 mm RAL 7035 Fine Textured All bold items in stock. ELSTEEL Terminal Boxes - Stainless Steel Stainless Steel Terminal Boxes Part No. Stainless Steel 304 ESTS ESTS ESTS ESTS EST ESTS ESTSS EST ESTS ESTS ESTS Stainless Steel 316 ESTS ESTS ESTS ESTS ESTS ESTS ESTS ESTS ESTS ESTS ESTS Description STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 175 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 X 200 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 300 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 80 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 175 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 150 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 200 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 X 200 X 120 mm STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS X 300 X 120 mm All bold items in stock.

5 ELSTEEL Techno Module The Most Modular Assembly Available 25mm 200mm 200mm Verified through Full Type Tests Brands Tested SCHNEIDER ELECTRIC ABB SIEMENS GE LS MERLIN GERIN MOELLER TERASAKI and more mm Patented 200mm grid modular system. Extensively tested and verified to IEC /2. All major brands of breakers, just fits perfectly into the system. It is the result of many years of research and development, and continuous testing at recognised test stations around the world. THE BEST TECHNICAL SOLUTION

6 ELSTEEL Techno Module The Toughest Framework on the Market All Joints Bolted & Torqued Suitable for Moving Machines The Techno Module system is modular in steps of 200 mm in all three directions. h d w That means that there are no limit to the possibilities and positions. The strong framework is made from profiled 2mm electro-galvanised and powder coated steel. It forms a 25mm grid and can be arranged in an unlimited number of ways. It rests on a modular base frame which incorporates all facilities for dividing and transportation.

7 Busbars ELSTEEL Techno Module The system uses standard 10mm thick flat busbar. Tested up to 7100Amp at 100kA/1sec. & 50kA/3sec. IEC /2 No Special Copper Extrusions Holders are made from specially formulated plastics, and mounted in any position inside the framework. THE BEST TECHNICAL SOLUTION

8 ELSTEEL Techno Module Form 3b + 4b The highest form of personal safety. With these separation plates installed it is possible to work in one section of the panel board while the rest of the panel is live. Special separation plates effectively prevent contamination of the whole panel board in case of an internal arc fault. THE BEST TECHNICAL SOLUTION

9 ELSTEEL Techno Module Internal ARC Protected Ultimate in Safety Arc filters have been included in the design of the separation plate - just add the standard chimneys and your enclosure is arc safe. No flames or solid objects will explode towards the operator or to adjacent sections. THE BEST TECHNICAL SOLUTION

10 ELSTEEL Techno Module Tests Tests Performed Certi cation Authority Techno Module Panels Comply to IEC / IEC & 2 Certi cate Reference 01. A full type test with LS Breakers (Instant Panel Light) A full type test with ABB breakers 03. A full type test with LS breakers (TM Light Panel) 04. A full type test with MG breakers (TM Light Panel) A full type test with ABB breakers A full type test with LS breakers A full type test with GE breakers A full type test with Siemens breakers A full type test with ABB breakers A full type test with ABB breakers A full type test with LS breakers A full type test with GE breakers A full type test with MG, ABB, Siemens, Jean Muller breakers A temperature rise test & short circuit test A full type test with MG breakers A full type test (AI busbar) withh ABB breakers A temperature rise test & short circuit test 18. 0A full type test with Schneider breakers 19. 0A full type test with ABB breakers 20. 0A full type test with Terasaki breakers A full type test with ABB & Jean Muller breakers A temperature rise test & short circuit test A full type test with ABB breakers A full type test with ABB breakers A full type test with ABB breakers 26. Short circuit test 50kA/1sec for 1x10x40 Cu & 1x10x30 Cu & Power Cassette unit 27. Short circuit test 50kA/1sec for 2x10x40 Cu 28. Short circuit test 50kA/1sec for 2x10x50 Cu 29. Short circuit test 50kA/3sec for 2x10x100 Cu 30. Short circuit test 100kA/1sec for 4x10x150 Cu IPH IPH CPRI IPH IPH IPH IPH TCA NATA NEFI S Tests Performed Certi cation Authority Techno Module Panels Comply to other standards 01. Internal Arc fault test according to IEC & AS/NZS : 2002 TCA 02. Vibrations test according to IEC & IEC VIPAC 03. Seismic test according IEC VIPAC 04. UL/ cul Mark for TM Panels and components UL 05. Loyd's Register type approval certi cate for marine, offshore and industrial applications LLOYD S REGISTER 06. ABS type approval certi cate for shipboard and associated marine & offshore installation ABS 07. Russian Maritime Register of Shipping (RS) Type approval certi cate for Marine use RS 08. Bureau Veritas (BV) Type Approval Certi cate for Marine use BV 09. Det Norske Veritas (DNV) Type Approval Certi cate for offshore use DNV Certi cate Reference / E207550:Vol-2 02/70003 (E1) 08-SG PDA /A0 BV E-10273

11 ELSTEEL Techno Module Certi cation THE BEST TECHNICAL SOLUTION

12 ELSTEEL Standard DB Elsteel Standard Box DB Part No. Description Rows ways DB4.4 Elsteel MS Box xx200 2x18 36 DB4.6 Elsteel MS Box x600x200 3x18 54 DB6.6 Elsteel MS Box 600x600x200 3x29 87 DB6.8 Elsteel MS Box 600xx200 5x Elsteel Distribution board DB xx xx x1000x x1200x xx xx

13 ELSTEEL Distribution Board DB2 Elsteel Distribution board DB x1000x x1200x xx xx x1000x x1200x

14 ELSTEEL Distribution Board DB2 Elsteel Distribution board DB xx xx x1000x x1200x

15 ELSTEEL Welded Orange DB Mild Steel RAL2000 Padlockable Part No. Description (WxHxD) Rows ways DB DB DB DB SP MS BOX x600x250 (W ) SP MS BOX xx250 (W ) SP MS BOX x1000x250 (W ) SP MS BOX x1200x250 (W ) 3x23 5x23 6x23 7x DB DB DB DB MS DB BOX 900x600x250 (W +500) MS DB BOX 900xx250 (W +500) MS DB BOX 900x1000x250 (W +500) MS DB BOX 900x1200x250 (W +500) 3x23 5x23 6x23 7x EXP A06 EXP A08 EXP A10 EXP A12 Expansion box (H 600) Expansion box (H ) Expansion box (H 1000) Expansion box (H 1200) 3x18 5x18 6x18 7x EXP B EXP C8 EXP C9 Cable entry box (W ) Cable entry box (W ) Cable entry box (W 900) CAN 04 CAN 09 Canopy (W ) Canopy (W 900) Basic DB expandable in all directions as per g.1 below All bold items in stock. Top entry cable box Optional Rain Canopy DB Optional Expansion A Expandable to left 600 / / 1000 / 1200mm 300mm B A mm 300mm/ mm C DB 500mm B Optional Expansion A mm Expandable to right Optional Cable Box C Optional Cable Box B 300mm B C mm/900mm B Optional Cable Box Bottom entry cable box Fig.1

16 ELSTEEL Stainless Steel DB s Stainless Steel 304 Padlockable Part No. Description (WxHxD) Rows ways DBS DBS DBS DBS ATI DB Box - SS x600x250 ATI DB Box - SS xx250 ATI DB Box - SS x1000x250 ATI DB Box - SS x1200x250 Basic DB expandable in all directions as per g.1 on the previous page All bold items in stock. 3x23 5x23 6x23 7x ELSTEEL Braided Flex Part No. Description Rated Current (A) FB FB FB 160- FB FB FB FB FB FB -325 FB - FB -475 FB -550 FB -700 FB FB FB 630- FB FB FB FB FB Cut off Current (KA) Length (L) Order Number All bold items in stock.