CA IMS Tools CA RS 1309 Service List

Transcription

1 CA IMS Tools CA RS 1309 Service List Description Hiper 16.0 RO60208 ADD SUPPORT FOR KEYWORD SSID OPTION RO60339 NEW ERROR MSG WHEN PDS IS FULL RO60344 STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART RO60408 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND RO60409 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND RO61395 INCORRECT DSID USED BY PHIDAM RECOVERY **HIPER** RO61828 DBO API UNLOAD LOOPING AT END OF DATABASE RO61832 SUPPRESS SYSUDUMP FOR U4094 ABEND RO61927 S0C4 IN ETMIETOZ AT IMS RESTART **HIPER** RO62234 DBOTRACE OUTPUT FROM DBO API PTF RO62424 U4094 DOES NOT END JOB The CA RS 1309 service count for this release is 11

2 CA IMS Tools CA RS 1309 Service List Description Hiper 15.0 RO57374 HPOEXEC INVALID MESSAGES / SOC4 RO57726 INITSEGMENTDATA COMPRESSED SEGMENTS RELOADS RO57787 UNKNOWN OPTION KEYWORD AUTOBKO RO58153 /NRE COMMAND RECEIVES DFS3662W COMMAND REJECTED BY DFSCCMD0 RO58160 ISPF: REQUIRES HPR LMPKEY RO58484 ECSA LEAK RO58635 ICB3002W MESSAGE MISLEADING RO58938 DBO API MODE UNLOAD 0C4 RO59002 BLT RECEIVES ABEND S0C4 AT ITLPDUR+144 WITH GSAM DATABASE RO59073 BBF RECEIVES ABEND S0C4 AT PRMBRDU+144 WITH GSAM DATABASE RO59185 CFM4205I MESSAGE TRUNCATED RO59250 ISPF: REQUIRES HPR LMPKEY RO59483 NEW ERROR MSG WHEN PDS IS FULL RO59818 ABEND S0C3 IN DBACLTF0 IN IMAGE COPY STEP RO59892 RECON NOT UPDATED PROPERLY AFTER DBO4301W ON DUPLICATE IC RO59948 IMPROVE SMF 89 RECORD INFORMATION RO59949 IMPROVE SMF 89 RECORD INFORMATION RO59950 IMPROVE SMF 89 RECORD INFORMATION RO59951 IMPROVE SMF 89 RECORD INFORMATION RO59952 IMPROVE SMF 89 RECORD INFORMATION RO59953 IMPROVE SMF 89 RECORD INFORMATION RO59954 IMPROVE SMF 89 RECORD INFORMATION RO59955 IMPROVE SMF 89 RECORD INFORMATION RO59956 IMPROVE SMF 89 RECORD INFORMATION RO60075 STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART RO60227 INCORRECT VALUE FOR MONITOR= KEYWORD RO60228 INCORRECT VALUE FOR MONITOR= KEYWORD RO60504 FFOR S378 IN BMC DBITERC1 - DSPCRTR0 FRONT-END RO61362 SUPPRESS SYSUDUMP FOR U4094 ABEND RO61706 DBO API UNLOAD LOOPING AT END OF DATABASE RO61853 IC NOTIFY ON UNREG DB DS RO61950 RELOAD SETS INCORRECT PTF POINTERS FOR KEY-SEQUENCE SEGMENTS RO62156 DBOTRACE OUTPUT FROM DBO API PTF RO62471 COPYIC OVERRIDES DDNAME VALUE RO62511 U4094 DOES NOT END JOB The CA RS 1309 service count for this release is 35

3 CA IMS Tools CA RS 1309 Service List Description Hiper 14.0 RO57333 DBOLOAD DD IS IGNORED RO57335 DBO API - NO MSG WHEN MISSING DFSURWF1 FROM JCL RO58161 ISPF: REQUIRES HPR LMPKEY RO59252 ISPF: REQUIRES HPR LMPKEY RO59775 STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART RO60441 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT RO60442 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT RO60443 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT The CA RS 1309 service count for this release is 8

4 CA IMS Tools 4 CA RS 1309 Service List for CASTG00 FMID Service Description Hiper CASTG00 RO60339 NEW ERROR MSG WHEN PDS IS FULL The CA RS 1309 service count for this FMID is 1

5 CA IMS Tools 5 CA RS 1309 Service List for CCHAF00 FMID Service Description Hiper CCHAF00 RO59948 IMPROVE SMF 89 RECORD INFORMATION The CA RS 1309 service count for this FMID is 1

6 CA IMS Tools 6 CA RS 1309 Service List for CEW2F00 FMID Service Description Hiper CEW2F00 RO57787 UNKNOWN OPTION KEYWORD AUTOBKO RO59073 BBF RECEIVES ABEND S0C4 AT PRMBRDU+144 WITH GSAM DATABASE RO59950 IMPROVE SMF 89 RECORD INFORMATION The CA RS 1309 service count for this FMID is 3

7 CA IMS Tools 7 CA RS 1309 Service List for CEW5F00 FMID Service Description Hiper CEW5F00 RO58153 /NRE COMMAND RECEIVES DFS3662W COMMAND REJECTED BY DFSCCMD0 RO59956 IMPROVE SMF 89 RECORD INFORMATION The CA RS 1309 service count for this FMID is 2

8 CA IMS Tools 8 CA RS 1309 Service List for CEW5G00 FMID Service Description Hiper CEW5G00 RO61927 S0C4 IN ETMIETOZ AT IMS RESTART **HIPER** The CA RS 1309 service count for this FMID is 1

9 CA IMS Tools 9 CA RS 1309 Service List for CEW6F00 FMID Service Description Hiper CEW6F00 RO59185 CFM4205I MESSAGE TRUNCATED RO59949 IMPROVE SMF 89 RECORD INFORMATION The CA RS 1309 service count for this FMID is 2

10 CA IMS Tools 10 CA RS 1309 Service List for CHPRE00 FMID Service Description Hiper CHPRE00 RO58161 ISPF: REQUIRES HPR LMPKEY RO59252 ISPF: REQUIRES HPR LMPKEY The CA RS 1309 service count for this FMID is 2

11 CA IMS Tools 11 CA RS 1309 Service List for CHPRF00 FMID Service Description Hiper CHPRF00 RO58160 ISPF: REQUIRES HPR LMPKEY RO59250 ISPF: REQUIRES HPR LMPKEY RO59951 IMPROVE SMF 89 RECORD INFORMATION The CA RS 1309 service count for this FMID is 3

12 CA IMS Tools 12 CA RS 1309 Service List for CIDAE00 FMID Service Description Hiper CIDAE00 RO60441 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT The CA RS 1309 service count for this FMID is 1

13 CA IMS Tools 13 CA RS 1309 Service List for CIDAF00 FMID Service Description Hiper CIDAF00 RO59818 ABEND S0C3 IN DBACLTF0 IN IMAGE COPY STEP RO59952 IMPROVE SMF 89 RECORD INFORMATION RO60227 INCORRECT VALUE FOR MONITOR= KEYWORD The CA RS 1309 service count for this FMID is 3

14 CA IMS Tools 14 CA RS 1309 Service List for CIDAG00 FMID Service Description Hiper CIDAG00 RO60208 ADD SUPPORT FOR KEYWORD SSID OPTION The CA RS 1309 service count for this FMID is 1

15 CA IMS Tools 15 CA RS 1309 Service List for CIDOE00 FMID Service Description Hiper CIDOE00 RO57333 DBOLOAD DD IS IGNORED RO57335 DBO API - NO MSG WHEN MISSING DFSURWF1 FROM JCL RO60442 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT The CA RS 1309 service count for this FMID is 3

16 CA IMS Tools 16 CA RS 1309 Service List for CIDOF00 FMID Service Description Hiper CIDOF00 RO57726 INITSEGMENTDATA COMPRESSED SEGMENTS RELOADS RO58938 DBO API MODE UNLOAD 0C4 RO59953 IMPROVE SMF 89 RECORD INFORMATION RO60228 INCORRECT VALUE FOR MONITOR= KEYWORD RO61362 SUPPRESS SYSUDUMP FOR U4094 ABEND RO61706 DBO API UNLOAD LOOPING AT END OF DATABASE RO61853 IC NOTIFY ON UNREG DB DS RO61950 RELOAD SETS INCORRECT PTF POINTERS FOR KEY-SEQUENCE SEGMENTS RO62156 DBOTRACE OUTPUT FROM DBO API PTF RO62471 COPYIC OVERRIDES DDNAME VALUE RO62511 U4094 DOES NOT END JOB The CA RS 1309 service count for this FMID is 11

17 CA IMS Tools 17 CA RS 1309 Service List for CIDOG00 FMID Service Description Hiper CIDOG00 RO60408 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND RO61395 INCORRECT DSID USED BY PHIDAM RECOVERY **HIPER** RO61828 DBO API UNLOAD LOOPING AT END OF DATABASE RO61832 SUPPRESS SYSUDUMP FOR U4094 ABEND RO62234 DBOTRACE OUTPUT FROM DBO API PTF RO62424 U4094 DOES NOT END JOB The CA RS 1309 service count for this FMID is 6

18 CA IMS Tools 18 CA RS 1309 Service List for CIHOF00 FMID Service Description Hiper CIHOF00 RO59954 IMPROVE SMF 89 RECORD INFORMATION The CA RS 1309 service count for this FMID is 1

19 CA IMS Tools 19 CA RS 1309 Service List for CITKE00 FMID Service Description Hiper CITKE00 RO60443 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT The CA RS 1309 service count for this FMID is 1

20 CA IMS Tools 20 CA RS 1309 Service List for CITKF00 FMID Service Description Hiper CITKF00 RO58635 ICB3002W MESSAGE MISLEADING RO59002 BLT RECEIVES ABEND S0C4 AT ITLPDUR+144 WITH GSAM DATABASE RO59892 RECON NOT UPDATED PROPERLY AFTER DBO4301W ON DUPLICATE IC RO59955 IMPROVE SMF 89 RECORD INFORMATION RO60504 FFOR S378 IN BMC DBITERC1 - DSPCRTR0 FRONT-END The CA RS 1309 service count for this FMID is 5

21 CA IMS Tools 21 CA RS 1309 Service List for CITKG00 FMID Service Description Hiper CITKG00 RO60409 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND The CA RS 1309 service count for this FMID is 1

22 CA IMS Tools 22 CA RS 1309 Service List for CITSE00 FMID Service Description Hiper CITSE00 RO59775 STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART The CA RS 1309 service count for this FMID is 1

23 CA IMS Tools 23 CA RS 1309 Service List for CITSF00 FMID Service Description Hiper CITSF00 RO57374 HPOEXEC INVALID MESSAGES / SOC4 RO60075 STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART The CA RS 1309 service count for this FMID is 2

24 CA IMS Tools 24 CA RS 1309 Service List for CITSG00 FMID Service Description Hiper CITSG00 RO60344 STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART The CA RS 1309 service count for this FMID is 1

25 CA IMS Tools 25 CA RS 1309 Service List for CST3F00 FMID Service Description Hiper CST3F00 RO58484 ECSA LEAK RO59483 NEW ERROR MSG WHEN PDS IS FULL The CA RS 1309 service count for this FMID is 2

26 CA IMS Tools CA RS PTF RO RO60208 RO60208 M.C.S. ENTRIES = ++PTF (RO60208) ADD SUPPORT FOR KEYWORD SSID OPTION A Database Analyzer for IMS for z/os Problem Description: CA Database Analyzer for IMS for z/os (DBA) has no support for the SSID keyword. This is inconsistent with CA Database Organizer for IMS for z/os (DBO). Valid values for the SSID keyword are JOBNAME and JOBNAMES. Symptoms: The default behavior for DBA for the signon is to use the jobname. This can be seen in the following message in DBAMSGS: IDI2603I DBRC SIGNON SUCCESSFUL, SSID = jobname. After this PTF, if SSID=JOBNAMES is specified, the SSID used for the signon will be consistent with DBO; the first five characters of the jobname, then a three digit number: IDI2603I DBRC SIGNON SUCCESSFUL, SSID = jobnaxxx. IMPACT: N/A Circumvention: N/A Products Affected: CA Database Analyzer 18.0 CA Database Analyzer 16.0 DBA 448 Copyright (C) 2013 CA. All rights reserved. R00012-I160-SP0 DESC(ADD SUPPORT FOR KEYWORD SSID OPTION). FMID (CIDAG00) SUP ( TR60208 )

27 CA IMS Tools CA RS PTF RO RO60339 RO60339 M.C.S. ENTRIES = ++PTF (RO60339) NEW ERROR MSG WHEN PDS IS FULL PROBLEM TITLE: NEW ERROR MSG WHEN PDS IS FULL CA Compress Data Compression for IMS (CMPIMS) PROBLEM DESCRIPTION: The CA Compress Data Compression for IMS (CMPIMS) shows ISPF error "SPF138 STOW error" when no more directory blocks in the GENLIB PDS while attempting to write "Compress DBD" and "Reorg DBD" from ISPF menu This message does not accurately describe the situation so a new message is introduced. SYMPTOMS: Message "ISPF138 STOW error Module ISPFITLR received decimal return code 12, decimal reason code 0" is shown. IMPACT: Compress and Reorg DBDs are not created. CIRCUMVENTION: Either free up some space in the GENLIB PDS by deleting members, or compress the GENLIB PDS, or copy the dataset to one with more directory blocks. PRODUCT(S) AFFECTED: CA Compress Data Compression for IMS Release 15.0 CA Compress Data Compression for IMS Release 16.0 CMPIMS 563 Copyright (C) 2013 CA. All rights reserved. R00013-I160-SP1 DESC(NEW ERROR MSG WHEN PDS IS FULL). FMID (CASTG00) SUP ( TR60339 )

28 CA IMS Tools CA RS PTF RO RO60344 RO60344 M.C.S. ENTRIES = ++PTF (RO60344) STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART CA Database Organizer of IMS for Z/OS Problem Description: The Full Function Onling Reorg (FFOR) component of CA Database Organizer for IMS for Z/OS (DBO) requests services of the STCITK address space. In some cases an attempt to restart the STC after a failure (ABEND or CANCEL for example) leads to failures if an associated HPCOM data area (there could be several) has become invalid due to premature FREEMAIN or a storage overlay. Symptoms: S0C4 during ITK STC startup S878 during ITK STC startup Impact: The ITK STC cannot be restarted without an IPL or CA technical support intervention. Circumvention: None. PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 958 Copyright (C) 2013 CA. All rights reserved. R00014-I160-SP1 DESC(STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART). FMID (CITSG00) SUP ( TR60344 ) ++HOLD (RO60344) SYSTEM FMID(CITSG00) REASON (ACTION ) DATE (13177) COMMENT ( Product: IMS Toolkit Started Task Component Release: 16.0 NOTE: HPO STC WARM START (TYPE=W,PAUSE=W) REQUIRED ).

29 CA IMS Tools CA RS PTF RO RO60408 RO60408 M.C.S. ENTRIES = ++PTF (RO60408) RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND CA Database Organizer for IMS for z/os. Problem Description: CA Database Organizer for IMS for Z/OS (DBO) abnormally ends when CKUPDATE=YES,STOP4094 is used in a reload where the database datasets are overridden. Symptoms: DBO Reload abnormally ends with: USER COMPLETION CODE=4094 TIME= SEQ=28686 CPU=0000 ASID=0447 PSW AT TIME OF ERROR 078D2000 B3A9D8C2 ILC 2 INTC 0D ACTIVE LOAD MODULE ADDRESS=33A00180 OFFSET=0009D742 NAME=IDIDBOJ DATA AT PSW 33A9D8BC - BF2A181F 0A0D Impact: The database is not reloaded. Circumvention: Set CKUPDATE=NO to prevent checking the RECONs for allocation records for the overidden database datasets. Products Affected: CA Database Organizer 16.0 CA Database Organizer 15.0 PRODUCT(S) AFFECTED: CA Database Organizer Release 12.0 CA Database Organizer Release 14.0 CA Database Organizer Release 15.0 CA Database Organizer Release 16.0 DBO 960 Copyright (C) 2013 CA. All rights reserved. R00015-I160-SP1 DESC(RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND). FMID (CIDOG00) SUP ( TR60408 ) ++IF FMID(CITKG00) REQ( RO60409).

30 CA IMS Tools CA RS PTF RO RO60409 RO60409 M.C.S. ENTRIES = ++PTF (RO60409) RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND CA Database Organizer for IMS for z/os. Problem Description: CA Database Organizer for IMS for Z/OS (DBO) abnormally ends when CKUPDATE=YES,STOP4094 is used in a reload where the database datasets are overridden. Symptoms: DBO Reload abnormally ends with: USER COMPLETION CODE=4094 TIME= SEQ=28686 CPU=0000 ASID=0447 PSW AT TIME OF ERROR 078D2000 B3A9D8C2 ILC 2 INTC 0D ACTIVE LOAD MODULE ADDRESS=33A00180 OFFSET=0009D742 NAME=IDIDBOJ DATA AT PSW 33A9D8BC - BF2A181F 0A0D Impact: The database is not reloaded. Circumvention: Set CKUPDATE=NO to prevent checking the RECONs for allocation records for the overidden database datasets. Products Affected: CA Database Organizer 16.0 CA Database Organizer 15.0 PRODUCT(S) AFFECTED: CA Database Organizer Release 12.0 CA Database Organizer Release 14.0 CA Database Organizer Release 15.0 CA Database Organizer Release 16.0 DBO 960 Copyright (C) 2013 CA. All rights reserved. R00015-I160-SP1 DESC(RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND). FMID (CITKG00) SUP ( TR60409 ) ++IF FMID(CIDOG00) REQ( RO60408).

31 CA IMS Tools CA RS PTF RO RO61395 RO61395 M.C.S. ENTRIES = ++PTF (RO61395) INCORRECT DSID USED BY PHIDAM RECOVERY CA High Performance Recovery for IMS for z/os CA High Performance Recovery for IMS for z/os FUNCTION=RECOVER when recovering a PHIDAM Multi-DSG database calculates incorrect DSIDs for all but the first DSGROUP of the database. SYMPTOMS: Execution of the FUNCTION(RECOVERY) will terminate successfully but a subsequent FUNCTION(INDEXCREATE) may fail or FUNCTION(ANALYZEALL) may detect errors due to some missing data. IMPACT: Database is partially recovered. DBA may report integerity errors. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 Database Organizer Release 16.0 HPR 224 Copyright (C) 2013 CA. All rights reserved. R00029-I160-SP1 DESC(INCORRECT DSID USED BY PHIDAM RECOVERY). FMID (CIDOG00) SUP ( TR61395 )

32 CA IMS Tools CA RS PTF RO RO61828 RO61828 M.C.S. ENTRIES = ++PTF (RO61828) DBO API UNLOAD LOOPING AT END OF DATABASE CA Database Organizer for IMS for Z/OS Problem Description: CA Database Organizer of IMS for Z/OS (DBO) does not set GB status code when the end of the database is reached while performing a qualified Get Next call without a maximum key being specified when using DBO's Application Program Interface to unload a database. Symptoms: When performing a qualified GN call that should reach the end of the database and set GB status, the API does not set a status code. It instead returns incorrect segment data and resets its position in the database to a previous root and continues processing from that point. Impact: Once the end of the database is reached, the application may get stuck in a loop waiting for the GB status code. Circumvention: Use Native IMS DLI processing to run application program. PRODUCT(S) AFFECTED: Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 936 Copyright (C) 2013 CA. All rights reserved. R00031-I160-SP1 DESC(DBO API UNLOAD LOOPING AT END OF DATABASE). FMID (CIDOG00) SUP ( TR61828 )

33 CA IMS Tools CA RS PTF RO RO61832 RO61832 M.C.S. ENTRIES = ++PTF (RO61832) SUPPRESS SYSUDUMP FOR U4094 ABEND CA Database Organizer of IMS for Z/OS Problem Description: CA Database Organizer of IMS for Z/OS (DBO) issues a SYSUDUMP when a U4094 abend is triggered during CKUPDATE processing. Symptoms: This SYSUDUMP is unnecessary because the U4094 abend is unique to CKUPDATE processing. This PTF will halt the processing when this occurs. Impact: Minimal. An unnecessary SYSUDUMP is produced. Circumvention: None. PRODUCT(S) AFFECTED: Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 967 Copyright (C) 2013 CA. All rights reserved. R00032-I160-SP1 DESC(SUPPRESS SYSUDUMP FOR U4094 ABEND). FMID (CIDOG00) PRE ( RO60408 ) SUP ( TR61832 )

34 CA IMS Tools CA RS PTF RO RO61927 RO61927 M.C.S. ENTRIES = ++PTF (RO61927) S0C4 IN ETMIETOZ AT IMS RESTART PROBLEM DESCRIPTION: CA Mainframe Extended Terminal Manager for IMS for z/os (ETM) may abend during IMS Restart even if ETM is not activated. SYMPTOMS: Abend S0C4 in ETMIETOZ+X'1A0'. Register 2 is X'AA8'. IMPACT: IMS will not restart. CIRCUMVENTION: Rename ETMPPUEZ to some other name. PRODUCT(S) AFFECTED: CA Mainframe Extended Terminal Manage Release 16.0 ETM 15 Copyright (C) 2013 CA. All rights reserved. R00035-I160-SP1 DESC(S0C4 IN ETMIETOZ AT IMS RESTART). FMID (CEW5G00) SUP ( AC61926 TR61927 )

35 CA IMS Tools CA RS PTF RO RO62234 RO62234 M.C.S. ENTRIES = ++PTF (RO62234) DBOTRACE OUTPUT FROM DBO API PTF CA Database Organizer of IMS for z/os PROBLEM DESCRIPTION: CA Database Organizer of IMS for z/os (DBO) PTF creates many thousand lines of DBOTRACE output after r15 PTF R or r16 PTF RO61828 are applied. the output is generated when the DBO UNLOAD API function is executed. SYMPTOMS: Output file DBOTRACE will contain thousands of lines of output. IMPACT: The job step may fail because the DBOTRACE file is very large or it may be OK but generate too much unnecessary trace output. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 971 Copyright (C) 2013 CA. All rights reserved. R00042-I160-SP1 DESC(DBOTRACE OUTPUT FROM DBO API PTF). FMID (CIDOG00) PRE ( RO61828 ) SUP ( AR61828 TR62234 )

36 CA IMS Tools CA RS PTF RO RO62424 RO62424 M.C.S. ENTRIES = ++PTF (RO62424) U4094 DOES NOT END JOB CA Database Organizer of IMS for Z/OS PROBLEM DESCRIPTION: CA Database Organizer of IMS for Z/OS (DBO) incorrectly continues to process subsequent job steps after a U4094 Abend is encountered. The return code is also incorrectly set to 16 instead of U4094. This is a result of PTF R SYMPTOMS: Job continues to subsequent steps after U4094 is hit. IMPACT: A RC of 16 is set in the job step to notify you of an error. CIRCUMVENTION: None PRODUCT(S) AFFECTED: Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 973 Copyright (C) 2013 CA. All rights reserved. R00046-I160-SP1 DESC(U4094 DOES NOT END JOB). FMID (CIDOG00) PRE ( RO60408 ) SUP ( AR61832 RO61832 TR61832 TR62220 TR62424 )

37 CA IMS Tools CA RS PTF RO RO57374 RO57374 M.C.S. ENTRIES = ++PTF (RO57374) HPOEXEC INVALID MESSAGES / SOC4 Common Components for IMS for z/os PROBLEM DESCRIPTION: When the CA Common Components for IMS for z/os component Started Task (STC)is used, the output message can be garbled or the STC abend with a S0C4. This has been seen when MODIFY commands are input. SYMPTOMS: Garbled messages output or S0C4 when certain MODIFY commands are input from FFOR. IMPACT: The STC output message is garbled and not helpful or, the STC abends with a code S0C4. CIRCUMVENTION: NONE TITLE: HPOEXEC Invalid Messages / S0C4 KEYWORDS: WRONG QUEUE HPOEXEC INVALID MSGS S0C4 HPOEXEC MODIFY COMMANDS FFOR PRODUCT(S) AFFECTED: CA Database Organizer Release 14.0 CA Database Organizer Release 15.0 COM 427 (C)2013 CA. All Rights Reserved.R00724-I15-SP1 DESC(HPOEXEC INVALID MESSAGES / SOC4). FMID (CITSF00) SUP ( ZITJ085 ) ++HOLD (RO57374) SYSTEM FMID(CITSF00) REASON (ACTION ) DATE (13100) COMMENT ( Product: IMS SUPPORT FOR DATABASE COMMAND CENTER Release: 15.0 /S HPO STC,TYPE=W,PAUSE=W Min required to reload this module ).

38 CA IMS Tools CA RS PTF RO RO57726 RO57726 M.C.S. ENTRIES = ++PTF (RO57726) INITSEGMENTDATA COMPRESSED SEGMENTS RELOADS CA Database Organizer for IMS for z/os PROBLEM DESCRIPTION: When invoking CA Database Organizer for IMS for z/os (DBO) to reload data bases (DBs) whose compressed segment lengths are increased between their unload and reload, and also specifying INITSEGMENTDATA during their reload to initialize their compressed segments up to their new segment lengths, the compressed segments are initialized only up to their original segment lengths. SYMPTOMS: The DB's increased length compressed segments are not initialized up to their new lengths in the DBD, but are initialized only up to their original lengths in the DBD. IMPACT: Increased length compressed segments cannot be initialized up to their new increased segment lengths during a reload. CIRCUMVENTION: Code EXPANDSEGMENT(NAME=<segname>,POSITION=nn,LENGTH=nn,FILL=X'xx') as well as INITSEGMENTDATA(...) during the reload. PRODUCT(S) AFFECTED: Database Organizer Release 12.0 Database Organizer Release 14.0 Database Organizer Release 15.0 DBO 950 (C)2013 CA. All Rights Reserved.R00725-I15-SP1 DESC(INITSEGMENTDATA COMPRESSED SEGMENTS RELOADS). FMID (CIDOF00) PRE ( RO49768 RO51532 RO54109 ) SUP ( ZIDJ144 )

39 CA IMS Tools CA RS PTF RO RO57787 RO57787 M.C.S. ENTRIES = ++PTF (RO57787) UNKNOWN OPTION KEYWORD AUTOBKO PROBLEM TITLE: Unknown option keyword AUTOBKO CA Mainframe Program Restart Manager for IMS for z/os (PRM) PROBLEM DESCRIPTION: When option keyword AUTOBKO is used in CA Mainframe Program Restart Manager for IMS for z/os (PRM), error message PRM0020W OPTION UNKNOWN: AUTOBKO is issued to JOBLOG but the keyword is honored. SYMPTOMS: Auto backout function is invoked, but the following message is issued to JOBLOG. PRM0020W OPTION UNKNOWN: AUTOBKO IMPACT: None CIRCUMVENTION: Use AUTOBKO=Y instead of AUTOBKO. PRM 10 (C)2013 CA. All Rights Reserved.R00726-I15-SP1 DESC(UNKNOWN OPTION KEYWORD AUTOBKO). FMID (CEW2F00) PRE ( RO37956 RO38477 RO38850 RO41331 RO51277 ) SUP ( ZE2B008 )

40 CA IMS Tools CA RS PTF RO RO58153 RO58153 M.C.S. ENTRIES = ++PTF (RO58153) /NRE COMMAND RECEIVES DFS3662W COMMAND REJECTED BY DFSCCMD0 PROBLEM DESCRIPTION: CA Mainframe Extended Terminal Manager for IMS for z/os (ETM) issues message DFS3662W COMMAND REJECTED BY DFSCCMD0 and IMS will NOT accept ANY IMS Command from the WTOR. This occurs after the following IMS maintenance has been applied: IBM APAR PM66525 (IMS 11.1) PM69539 (IMS 12.1) or PM81141 (IMS 13.1) SYMPTOMS: Message DFS3662W COMMAND REJECTED BY DFSCCMD0 is issued to all commands from the WTOR. IMPACT: ALL IMS Commands issued from the IMS WTOR will fail including IMS restart commands. CIRCUMVENTION: Back off the IMS maintenance. PRODUCT(S) AFFECTED: CA Mainframe Extended Terminal Manage Release 15.0 ETM 13 (C)2013 CA. All Rights Reserved.R00727-I15-SP1 DESC(/NRE COMMAND RECEIVES DFS3662W COMMAND REJECTED BY DFSCCMD0). FMID (CEW5F00) PRE ( RO45874 RO47541 ) SUP ( ZS5B011 )

41 CA IMS Tools CA RS PTF RO RO58160 RO58160 M.C.S. ENTRIES = ++PTF (RO58160) ISPF: REQUIRES HPR LMPKEY PROBLEM TITLE: DBCOPY ISPF Interface Requires HPR LMPKEY CA Database Copier for IMS for z/os PROBLEM DESCRIPTION: When using IPSF interface to generate Image copy JCL, CA Database Copier for IMS for z/os (DBCOPY) is requiring a license key for HP Recovery (HPR). SYMPTOMS: The following message is issued. CAS9180E - CPU 19D106 REQUIRES A LMP KEY TO RUN PROD (XI) XI belongs to product "CA HIGH PERFORMANCE RECOVERY" IMPACT: Unable to use ISPF interface to create DBCOPY JCL. CIRCUMVENTION: Customer can manually create DBCOPY JCL to process image copy. KEYWORD(s): RMG DBCOPY RMGCTLR LMPKEY LICENSE CAS9180E LMP PRODUCT(S) AFFECTED: Database Copier Release 14.0 Database Copier Release 15.0 Database Copier Release 16.0 DBCOPY 204 (C)2013 CA. All Rights Reserved.R00728-I15-SP1 DESC(ISPF: REQUIRES HPR LMPKEY). FMID (CHPRF00) PRE ( RO51025 ) SUP ( ZA13112 )

42 CA IMS Tools CA RS PTF RO RO58484 RO58484 M.C.S. ENTRIES = ++PTF (RO58484) ECSA LEAK PROBLEM TITLE: ECSA storage leak CA Compress Data Compression for IMS for z/os PROBLEM DESCRIPTION: When using CA Compress Data Compression for IMS (CMPIMS) with BMC utilities, memory in Extended Common Storage Area (ECSA) is allocated and not freed. When ECSA is fully allocated, an IPL may be required. SYMPTOMS: For some SHR310I messages, an orphan ECSA storage in subpool 231 is left behind. For message SHR311I, more blocks are left behind. Some of the jobs leave ECSA storage in subpool 241 orphaned. CSA leak in SP241 is much smaller then leak in SP231. IMPACT: The IPL may be required when ECSA is fully allocated. CIRCUMVENTION: None KEYWORD(s): CMPIMS ECSA SHR311I Compress Storage BMC PRODUCT(S) AFFECTED: Compress Data Compression Release: 15.0 Compress Data Compression Release: 16.0 RELATED CONTACT ISSUE(S): CMPIMS 560 (C)2013 CA. All Rights Reserved.R00731-I15-SP1 DESC(ECSA LEAK). FMID (CST3F00) PRE ( RO48702 ) SUP ( RO44735 ZA13173 )

43 CA IMS Tools CA RS PTF RO RO58635 RO58635 M.C.S. ENTRIES = ++PTF (RO58635) ICB3002W MESSAGE MISLEADING CA Database Analyzer for IMS for z/os PROBLEM DESCRIPTION: The CA Database Analyzer for IMS for z/os(dba)control Block Validity Manager(CBVM) component function DECODE and DISSASSEMBLE for MFS returns misleading warning message when a MFS member is not found in the FORMAT file or if the warning is due to an invalid input sequence in the control cards. SYMPTOMS: ICB3002W MEMBER memname NOT FOUND output when a member is missing from the MFS FORMAT file or the DECODE/DISASSEMBLE input has invalid input Sequence member names. Note: Currently input sequence of MOD/MID is accepted. IMPACT: When attempting to correct the problem it is unclear which FORMAT file member is missing or if an invalid INPUT SEQUENCE problem has occurred in the control input information. CIRCUMVENTION: None TITLE: ICB3002W MESSAGE MISLEADING KEYWORDS: DBA ICB MFS ICB3002W DECODE DISASSEMBLE FORMAT PRODUCT(S) AFFECTED: CA Database Analyzer Release 15.0 CA Database Analyzer Release 16.0 DBA 444 (C)2013 CA. All Rights Reserved.R00730-I15-SP1 DESC(ICB3002W MESSAGE MISLEADING). FMID (CITKF00) PRE ( RO41038 RO43753 RO44853 RO46836 RO47761 RO56076 ) SUP ( RO42068 RO42552 ZIAJ087 )

44 CA IMS Tools CA RS PTF RO RO58938 RO58938 M.C.S. ENTRIES = ++PTF (RO58938) DBO API MODE UNLOAD 0C4 CA Database Organizer of IMS for Z/OS Problem Description: CA Database Organizer of IMS for Z/OS (DBO) when attempting to Unload a database in API mode, DBO can abend with an 0C4. Symptoms: +DFS629I IMS BATCH REGION ABEND- SYS 00C4 IMST +DFS629I PSW AT ERROR = 078D F23874 IMST SYSTEM COMPLETION CODE=0C4 REASON CODE= Impact: Attempting to Unload in API mode may end 0C4. Circumvention: None. Products Affected: CA Database Organizer 15.0 CA Database Organizer 16.0 S0C4 WITH READ API PRODUCT(S) AFFECTED: Database Organizer Release 15.0 DBO 951 (C)2013 CA. All Rights Reserved.R00734-I15-SP1 DESC(DBO API MODE UNLOAD 0C4). FMID (CIDOF00) PRE ( RO38844 RO51027 RO51153 ) SUP ( RO42248 ZIDJ145 )

45 CA IMS Tools CA RS PTF RO RO59002 RO59002 M.C.S. ENTRIES = ++PTF (RO59002) BLT RECEIVES ABEND S0C4 AT ITLPDUR+144 WITH GSAM DATABASE PROBLEM DESCRIPTION: The Batch Log Tracker (BLT) component of CA Database Organizer for IMS (DBO) receives an ABEND S0C4 at ITLPDUR0+144 when formatting the report for a batch JOB which contains only GSAM Databases being accessed. SYMPTOMS: The following message will be issued: IDI1300E A S0C4 ABEND OCCURRED (MODULE ITLPDUR, SUFFIX(0), HEX OFFSET 0144, PSW-R12 ). NO EYECATCHER IMPACT: The Batch Jobstep will terminate with an S0C4 after the IMS batch region completes execution. CIRCUMVENTION: None PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 DBO 952 (C)2013 CA. All Rights Reserved.R00737-I15-SP1 DESC(BLT RECEIVES ABEND S0C4 AT ITLPDUR+144 WITH GSAM DATABASE). FMID (CITKF00) SUP ( ZIDJ146 )

46 CA IMS Tools CA RS PTF RO RO59073 RO59073 M.C.S. ENTRIES = ++PTF (RO59073) BBF RECEIVES ABEND S0C4 AT PRMBRDU+144 WITH GSAM DATABASE PROBLEM DESCRIPTION: The Batch Backout Facility (BBF) component of CA Mainframe Program Restart Manager for IMS (PRM) receives an ABEND S0C4 at PRMBRDU0+144 when formatting the report for a batch JOB which contains only GSAM Databases being accessed. SYMPTOMS: The following message will be issued: IDI1300E A S0C4 ABEND OCCURRED (MODULE PRMBRDU, SUFFIX(0), HEX OFFSET 0144, PSW-R12 ). NO EYECATCHER IMPACT: The Batch Jobstep will terminate with an S0C4 after the IMS batch region completes execution. CIRCUMVENTION: None PRODUCT(S) AFFECTED: CA Mainframe Program Restart Manager Release 15.0 PRM 11 (C)2013 CA. All Rights Reserved.R00738-I15-SP1 DESC(BBF RECEIVES ABEND S0C4 AT PRMBRDU+144 WITH GSAM DATABASE). FMID (CEW2F00) PRE ( RO38850 ) SUP ( ZE2B009 )

47 CA IMS Tools CA RS PTF RO RO59185 RO59185 M.C.S. ENTRIES = ++PTF (RO59185) CFM4205I MESSAGE TRUNCATED PROBLEM DESCRIPTION: When using CA Mainframe Configuration Manager for IMS for z/os (CFM) the last character of message CFM4205I is truncated and not printed out. CFMZCMA is truncating the error text to 100 characters. SYMPTOMS: The error codes reported by error message ATB80100I, RCPRI and RCSEC, should have 4 digit values. CFM has truncated the secondary error return code and is only displaying 3 of the 4 digits. IMPACT: The last digit of the secondary error return code is critical in trouble shooting. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: CA Mainframe Configuration Manager Release 15.0 CA Mainframe Configuration Manager Release 16.0 CFM 6 (C)2013 CA. All Rights Reserved.R00739-I15-SP1 DESC(CFM4205I MESSAGE TRUNCATED). FMID (CEW6F00) SUP ( ZEWB003 )

48 CA IMS Tools CA RS PTF RO RO59250 RO59250 M.C.S. ENTRIES = ++PTF (RO59250) ISPF: REQUIRES HPR LMPKEY PROBLEM DESCRIPTION: When using IPSF interface to generate Image copy JCL, CA Database Copier for IMS for z/os (DBCOPY) is requiring a license key for HP Recovery (HPR) SYMPTOMS: The following message is issued. CAS9180E - CPU 19D106 REQUIRES A LMP KEY TO RUN PROD (XI) XI belongs to product "CA HIGH PERFORMANCE RECOVERY" IMPACT: Unable to use ISPF interface to create DBCOPY JCL IMPACT: Middle CIRCUMVENTION: Customer can manually create DBCOPY JCL to process image copy PRODUCT(S) AFFECTED: Database Copier Release Database Copier Release 15.0 Database Copier Release 16.0 DBCOPY 205 (C)2013 CA. All Rights Reserved.R00740-I15-SP1 DESC(ISPF: REQUIRES HPR LMPKEY). FMID (CHPRF00) PRE ( RO51025 ) SUP ( RO58160 ZIKJ061 )

49 CA IMS Tools CA RS PTF RO RO59483 RO59483 M.C.S. ENTRIES = ++PTF (RO59483) NEW ERROR MSG WHEN PDS IS FULL PROBLEM TITLE: NEW ERROR MSG WHEN PDS IS FULL CA Compress Data Compression for IMS (CMPIMS) PROBLEM DESCRIPTION: The CA Compress Data Compression for IMS (CMPIMS) shows ISPF error "SPF138 STOW error" when no more directory blocks in the GENLIB PDS while attempting to write "Compress DBD" and "Reorg DBD" from ISPF menu This message does not accurately describe the situation so a new message is introduced. SYMPTOMS: Message "ISPF138 STOW error Module ISPFITLR received decimal return code 12, decimal reason code 0" is shown. IMPACT: Compress and Reorg DBDs are not created. CIRCUMVENTION: Either free up some space in the GENLIB PDS by deleting members, or compress the GENLIB PDS, or copy the dataset to one with more directory blocks. CMPIMS 563 (C)2013 CA. All Rights Reserved.R00741-I15-SP1 DESC(NEW ERROR MSG WHEN PDS IS FULL). FMID (CST3F00) SUP ( ZSTA006 )

50 CA IMS Tools CA RS PTF RO RO59818 RO59818 M.C.S. ENTRIES = ++PTF (RO59818) ABEND S0C3 IN DBACLTF0 IN IMAGE COPY STEP Product: CA Database Analyzer for IMS for z/os. Problem Description: CA Database Analyzer for IMS for z/os (DBA) abnormally ends if invoked under an Image Copy when the keyword value for POINTERCHECK is overridden with CROSSDBD. Symptoms: CA Database Analyzer ends with S0C3 in module DBACLTF0 at offset Impact: CA Database Analyzer abends when running under an Image Copy step, causing the image copy step to fail. Circumvention: Do not override the POINTERCHECK keyword when running CA Database Analyzer under an Image Copy. Products Affected: CA Database Analyzer 16.0 CA Database Analyzer 15.0 DBA 446 (C)2013 CA. All Rights Reserved.R00746-I15-SP1 DESC(ABEND S0C3 IN DBACLTF0 IN IMAGE COPY STEP). FMID (CIDAF00) PRE ( RO51026 RO52314 ) SUP ( ZIAJ088 ) ++HOLD (RO59818) SYSTEM FMID(CIDAF00) REASON (EC ) DATE (13161) COMMENT ( Product: Database Analyzer for IMS for z/os Release: 15.0 Sequence: You may want to review the contents of the DBAANALZ parmlib member to avoid the I-level messages added by this PTF. Purpose: So that the image copy process is not adversely affected, database and dataset cross-checking options are not allowed when DBA is called as an exit by an image copy utility. Specifically, ANALYZEALL requests are instead treated as ANALYZE requests, and POINTERCHECK=CROSSDBD and CROSSDSG are lowered to LOCAL. If this were not done, and the options were respected, DBA would have to read additional databases and/or dataset groups at the end of the image copy processing. This could delay significantly the image copy process. The default pointer checking method in image copy mode is STATISTICAL, which uses less memory and CPU than local (full) checking. Relevance: The changes resulting from this PTF have long been in place for HALDB and Asynchronous Image Copy when used with Database Analyzer. So you're most likely only impacted if you use neither of these. Knowledge required: CA Database Solution for IMS for z/os Access required: Update access to the Database Solutions global PARMLIB member DBAANALZ. Steps to Perform: 1. Review PARMLIB member DBAANALZ. 2. Remove any FUNCTION specification. 3. Remove or modify the POINTERCHECK specification. ).

51 CA IMS Tools CA RS PTF RO RO59892 RO59892 M.C.S. ENTRIES = ++PTF (RO59892) RECON NOT UPDATED PROPERLY AFTER DBO4301W ON DUPLICATE IC CA Database Copier for IMS for z/os (DBCOPY) PROBLEM DESCRIPTION: DBCOPY treats an error on the duplicate image copy dataset as an error on both image copy datasets. 1.Misleading error message DBO4303E is issued. 2.RECON is not properly updated when DBRC is used. a)reusable IC dataset in error is marked or kept marked as available, instead of being marked as IC dataset in error. b)reusable IC dataset not in error is marked or kept marked as available, instead of being marked as used and ready for recovery. c)non-reusable IC dataset that is in error is not registered to DBRC, instead of being marked as IC dataset in error. d)non-reusable IC dataset that is not in error is not registered to DBRC, although it can be used for recovery. SYMPTOMS: The following messages are issued: DBO4301W ERROR ON SECONDARY OUTPUT FILE. DBO4303E ALL OUTPUT FILES IN ERROR IMPACT: 1. Misleading error message is issued. 2. RECON is not updated properly, thus enabling DBRC assisted recovery from the image copy dataset not in error requires manual RECON updates. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: Database Copier Release 14.0 Database Copier Release 12.0 Database Copier Release 15.0 DBCOPY 161 (C)2013 CA. All Rights Reserved.R00742-I15-SP1 DESC(RECON NOT UPDATED PROPERLY AFTER DBO4301W ON DUPLICATE IC). FMID (CITKF00) PRE ( RO36815 RO37977 RO38432 RO38846 RO41337 RO42219 RO47212 RO48987 RO49007 RO51029 ) SUP ( ZIKJ062 )

52 CA IMS Tools CA RS PTF RO RO59948 RO59948 M.C.S. ENTRIES = ++PTF (RO59948) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CCHAF00) PRE ( RO52311 ) SUP ( ZA13489 ) ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CITKF00) REQ(RO59955). ++IF FMID(CEW5F00) REQ(RO59956).

53 CA IMS Tools CA RS PTF RO RO59949 RO59949 M.C.S. ENTRIES = ++PTF (RO59949) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CEW6F00) SUP ( ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CITKF00) REQ(RO59955). ++IF FMID(CEW5F00) REQ(RO59956).

54 CA IMS Tools CA RS PTF RO RO59950 RO59950 M.C.S. ENTRIES = ++PTF (RO59950) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CEW2F00) PRE ( RO37956 RO38234 RO38477 RO38850 RO41331 RO41848 RO51277 RO52312 ) SUP ( ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CITKF00) REQ(RO59955). ++IF FMID(CEW5F00) REQ(RO59956).

55 CA IMS Tools CA RS PTF RO RO59951 RO59951 M.C.S. ENTRIES = ++PTF (RO59951) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CHPRF00) PRE ( RO51025 ) SUP ( RO58160 RO59250 ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CITKF00) REQ(RO59955). ++IF FMID(CEW5F00) REQ(RO59956).

56 CA IMS Tools CA RS PTF RO RO59952 RO59952 M.C.S. ENTRIES = ++PTF (RO59952) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CIDAF00) PRE ( RO36812 RO37963 RO37974 RO38429 RO40348 RO44999 RO47257 RO48005 RO48984 RO51026 RO51152 RO52314 ) SUP ( RO44949 ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CITKF00) REQ(RO59955). ++IF FMID(CEW5F00) REQ(RO59956).

57 CA IMS Tools CA RS PTF RO RO59953 RO59953 M.C.S. ENTRIES = ++PTF (RO59953) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CIDOF00) PRE ( RO51027 ) SUP ( ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CITKF00) REQ(RO59955). ++IF FMID(CEW5F00) REQ(RO59956).

58 CA IMS Tools CA RS PTF RO RO59954 RO59954 M.C.S. ENTRIES = ++PTF (RO59954) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CIHOF00) PRE ( RO38398 RO40292 RO41032 ) SUP ( ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CITKF00) REQ(RO59955). ++IF FMID(CEW5F00) REQ(RO59956).

59 CA IMS Tools CA RS PTF RO RO59955 RO59955 M.C.S. ENTRIES = ++PTF (RO59955) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CITKF00) SUP ( RO38326 ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CEW5F00) REQ(RO59956).

60 CA IMS Tools CA RS PTF RO RO59956 RO59956 M.C.S. ENTRIES = ++PTF (RO59956) IMPROVE SMF 89 RECORD INFORMATION Problem Description: The CA Database Management Tools for IMS for z/os(com) does not issue helpful product and version descriptions in the SMF 89 records. Symptoms: When reports on the SMF 89 records are generated, the product version is shown as **.**.**. Impact: Product information not useful. Circumvention: None Products Affected: CA Common Components for IMS for z/os Release 16.0B CA Common Components for IMS for z/os Release 15.0 COM 430 (C)2013 CA. All Rights Reserved.R00743-I15-SP1 DESC(IMPROVE SMF 89 RECORD INFORMATION). FMID (CEW5F00) PRE ( RO36572 RO45874 RO47541 ) SUP ( ZA13489 ) ++IF FMID(CCHAF00) REQ(RO59948). ++IF FMID(CEW6F00) REQ(RO59949). ++IF FMID(CEW2F00) REQ(RO59950). ++IF FMID(CHPRF00) REQ(RO59951). ++IF FMID(CIDAF00) REQ(RO59952). ++IF FMID(CIDOF00) REQ(RO59953). ++IF FMID(CIHOF00) REQ(RO59954). ++IF FMID(CITKF00) REQ(RO59955).

61 CA IMS Tools CA RS PTF RO RO60075 RO60075 M.C.S. ENTRIES = ++PTF (RO60075) STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART CA Database Organizer of IMS for Z/OS Problem Description: The Full Function Onling Reorg (FFOR) component of CA Database Organizer for IMS for Z/OS (DBO) requests services of the STCITK address space. In some cases an attempt to restart the STC after a failure (ABEND or CANCEL for example) leads to failures if an associated HPCOM data area (there could be several) has become invalid due to premature FREEMAIN or a storage overlay. Symptoms: S0C4 during ITK STC startup S878 during ITK STC startup Impact: The ITK STC cannot be restarted without an IPL or CA technical support intervention. Circumvention: None. PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 958 (C)2013 CA. All Rights Reserved.R00748-I15-SP1 DESC(STCITK ABEND0C4 / ABENDS878 DURING COLD START/RESTART). FMID (CITSF00) SUP ( ZIDJ147 ) ++HOLD (RO60075) SYSTEM FMID(CITSF00) REASON (ACTION ) DATE (13169) COMMENT ( Product: IMS SUPPORT FOR DATABASE COMMAND CENTER Release: 15.0 Steps to Perform: HPO STC WARM START (TYPE=W,PAUSE=W) REQUIRED ).

62 CA IMS Tools CA RS PTF RO RO60227 RO60227 M.C.S. ENTRIES = ++PTF (RO60227) INCORRECT VALUE FOR MONITOR= KEYWORD CA Database Organizer of IMS for Z/OS PROBLEM DESCRIPTION: CA Database Organizer of IMS for Z/OS (DBO) incorrectly interprets the numeric value for the MONITOR keyword which displays progress reports every (i) specified seconds. SYMPTOMS: MONITOR=10 will generate progress reports every 1 second instead of every 10 seconds. IMPACT: Progress reports will not be generated in the desired interval. CIRCUMVENTION: Instead of specifying MONITOR=10, specify MONITOR=(YES,10). PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 959 (C)2013 CA. All Rights Reserved.R00752-I15-SP1 DESC(INCORRECT VALUE FOR MONITOR= KEYWORD). FMID (CIDAF00) PRE ( RO48005 RO48104 ) SUP ( ZIDJ148 ) ++IF FMID(CIDOF00) REQ(RO60228).

63 CA IMS Tools CA RS PTF RO RO60228 RO60228 M.C.S. ENTRIES = ++PTF (RO60228) INCORRECT VALUE FOR MONITOR= KEYWORD CA Database Organizer of IMS for Z/OS PROBLEM DESCRIPTION: CA Database Organizer of IMS for Z/OS (DBO) incorrectly interprets the numeric value for the MONITOR keyword which displays progress reports every (i) specified seconds. SYMPTOMS: MONITOR=10 will generate progress reports every 1 second instead of every 10 seconds. IMPACT: Progress reports will not be generated in the desired interval. CIRCUMVENTION: Instead of specifying MONITOR=10, specify MONITOR=(YES,10). PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 959 (C)2013 CA. All Rights Reserved.R00752-I15-SP1 DESC(INCORRECT VALUE FOR MONITOR= KEYWORD). FMID (CIDOF00) PRE ( RO48105 RO51027 ) SUP ( ZIDJ148 ) ++IF FMID(CIDAF00) REQ(RO60227).

64 CA IMS Tools CA RS PTF RO RO60504 RO60504 M.C.S. ENTRIES = ++PTF (RO60504) FFOR S378 IN BMC DBITERC1 - DSPCRTR0 FRONT-END PROBLEM DESCRIPTION: When executing the FFOR component of the CA Database Organizer for IMS for z/os in a BMC DI+ (Database Integrity Plus) environment, the IMS batch region abends with code S378. SYMPTOMS: DFS030I DBRC SIGNOFF REQUEST FAILED 05, RC=16 IM95 IEA705I ERROR DURING FREEMAIN SYS CODE = BZN4 IEA705I 00FCA C C IEA995I SYMPTOM DUMP OUTPUT 178 SYSTEM COMPLETION CODE=378 REASON CODE= IMPACT: The FFOR job abends and the original (not reorged) database is reinstated. CIRCUMVENTION: Remove the BMC modules from the IMS SDFSRESL library. PRODUCT(S) AFFECTED: Database Organizer Release 15.0 : Database Organizer Release 16.0 DBO 961 (C)2013 CA. All Rights Reserved.R00754-I15-SP1 DESC(FFOR S378 IN BMC DBITERC1 - DSPCRTR0 FRONT-END). FMID (CITKF00) PRE ( RO37958 RO41033 RO51029 ) SUP ( ZIDJ150 )

65 CA IMS Tools CA RS PTF RO RO61362 RO61362 M.C.S. ENTRIES = ++PTF (RO61362) SUPPRESS SYSUDUMP FOR U4094 ABEND CA Database Organizer of IMS for Z/OS Problem Description: CA Database Organizer of IMS for Z/OS (DBO) issues a SYSUDUMP when a U4094 abend is triggered during CKUPDATE processing. Symptoms: This SYSUDUMP is unnecessary because the U4094 abend is unique to CKUPDATE processing. This PTF will halt the processing when this occurs. Impact: Minimal. An unnecessary SYSUDUMP is produced. Circumvention: None. PRODUCT(S) AFFECTED: Database Organizer Release 15.0 Database Organizer Release 16.0 DBO 967 (C)2013 CA. All Rights Reserved.R00769-I15-SP1 DESC(SUPPRESS SYSUDUMP FOR U4094 ABEND). FMID (CIDOF00) PRE ( RO36813 RO37975 RO38430 RO38844 RO47140 RO48985 RO49005 RO50323 RO51027 RO56984 RO60225 RO61229 ) SUP ( RO51901 ZIDJ153 )