Flow control valves Series SCU, MCU, SVU, MVU, SCO, MCO
|
|
- Angel Violet Thomas
- 6 years ago
- Views:
Transcription
1 S E R I E S SCU MCU SVU MVU SCO Flow control valves Series SCU, MCU, SVU, MVU, SCO, Unidirectional and bidirectional banjo flow controllers Ports M, G1/8, G1/4, G3/8, G1/2 A U T O M A T I C These unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to complete the regulator with the most suitable system in relation to the available tube. Only the G1/2 model is supplied complete with banjo flow controllers. For the other models the banjo flow controller is to be requested separately. V A L V E S GENERAL DATA Construction Valve group Materials Mounting Ports Installation Operating temperature Lubricant needle type unidirectional and bidirectional controller OT8 - NBR seals by male thread M - G1/8 - G1/4 - G3/8 - G1/2 in any position from 0 to 80 C (with dry air - 20 C) compatible with NBR (3 10 E) PNEUMATIC DATA Operating pressure Nominal pressure Nominal flow Nominal diameter Fluid from 1 to 10 bar 6 bar see graph M = 1. mm G3/8 = 7 mm filtered air G1/8 = 2 mm G1/2 = 12 mm G1/4 = 4 mm 001
2 1 SCU MCU SVU MVU SCO S E R I E S CODING OF BANJO FLOW CONTROLLERS MCU 702-M ACTUATION M = Manual S = Screwdriver IDENTIFICATION OF DIFFERENT TYPES SCU MCU SVU MVU SCO ASSEMBLY CU = on cylinders unidirectional VU = on valves unidirectional CO = bidirectional UNIDIRECTIONAL AND BIDIRECTIONAL FLOW CONTROLLERS To ensure the right choice of unidirectional flow controller, proceed as follows: calculate the quantity of air in Nl/min (see cylinder Table); determine the stroke time of the cylinder; refer to graph to see which controller is the right type. In the case of bidirectional regulators, refer to the graph and check whether the flow control range is suitable for the work required. AVAILABLE BANJO FLOW CONTROLLERS MCU/6610 MVU VERSIONS 6 = needle (screwdriver operated) 7 = needle (manual operated) MCU/1610 MVU M FLOW CONTROL RANGE 02 = ø 1. max 04 = ø 2 max 06 = ø 4 max 08 = ø 7 max 10 = ø 12 max SCU/2023 SVU SCO PORTS M 1/8 1/4 3/8 1/2 Flow Qn (Nl/min.) from B A with controller OPEN: 60 Flow Qn (Nl/min.) from B A with controller CLOSED: 43 SCO/290 (silenced) 002
3 S E R I E S SCU MCU SVU MVU SCO UNIDIRECTIONAL AND BIDIRECTIONAL FLOW CONTROLLERS G1/8 Flow Qn (Nl/min.) from B A with controller OPEN: 221 Flow Qn (Nl/min.) from B A with controller CLOSED: 136 G3/8 Flow Qn (Nl/min.) from B A with controller OPEN: 710 Flow Qn (Nl/min.) from B A with controller CLOSED: 410 G1/4 Flow Qn (Nl/min.) from B A with controller OPEN: 391 Flow Qn (Nl/min.) from B A with controller CLOSED: 230 G1/2 Flow Qn (Nl/min.) from B A with controller OPEN: 270 Flow Qn (Nl/min.) from B A with controller CLOSED:
4 1 SCU MCU SVU MVU SCO S E R I E S Valves Series SCU Adjustment of setting by a screwdriver. Ports: M, G1/8, G1/4 and G3/8. A S H L SW SCU M M SCU 604-1/8 G1/ SCU 606-1/4 G1/ SCU 608-3/8 G3/ Valves Series MCU Adjustment of setting by a manually operated knurled screw. Ports: M, G1/8, G1/4, G3/8. A S H L Z SW SW1 MCU M M MCU 704-1/8 G1/ MCU 706-1/4 G1/ MCU 708-3/8 G3/ Valves Series SVU on valves. Adjustment of setting by a screwdriver. Ports: M, G1/8, G1/4. A S H L SW SVU M M SVU 604-1/8 G1/ SVU 606-1/4 G1/
5 S E R I E S SCU MCU SVU MVU SCO Valves Series MVU on valve. Adjustment of setting by a manually operated knurled screw. Ports: M, G1/8, G1/4. A S H L Z SW SW1 MVU 702- M M MVU 704-1/8 G1/ MVU 706-1/4 G1/ Valves Series SCO Adjustment of setting by a screwdriver. Ports: M, G1/8, G1/4. A S H L SW SCO M M SCO 604-1/8 G1/ SCO 606-1/4 G1/ Valves Series Adjustment of setting by a knurled screw. Ports: M, G1/8, G1/4. A S H L Z SW SW M M /8 G1/ /4 G1/
6 1 SCU MCU SVU MVU SCO S E R I E S Valves Series SCU Screwdriver adjustment. SCU 610-1/2 Valves Series MCU Knurled screw adjustment. MCU 710-1/2 Valves Series SVU on valves. Screwdriver adjustment. SVU 610-1/2 Valves Series MVU Knurled screw adjustment. MVU 710-1/2 006
7 S E R I E S SCU MCU SVU MVU SCO Valves Series SCO Screwdriver adjustment. SCO 610-1/2 Valves Series Knurled screw adjustment /2 Flow control valves with silencer Series RSW Flow control valves with silencer. Connections: G1/8, G1/4, G1/2. A B C D SW RSW 1/8 G1/ RSW 1/4 G1/ RSW 1/2 G1/ Silencing bush Series 290 Silencing bush for SCO or A S H 290 1/ , 290 1/ , 14, 290 3/ ,8 14, 007
pneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
More informationsize size
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
More informationSpeed Controller with Fixed Orifice
P.G.Information (Specialized product) SP043M-025E P: JO Speed Controller with Fixed Orifice AS****-X250 Feature 1: 0.12mm SMC CORPORATION 1-16-4 Shimbashi, Minato-ku Tokyo 105-0004, JAPAN URL: http://www.smcworld.com
More informationMotorised Butterfly Valve DMK Nominal Diameter Rp 3/4 - Rp 2
Motorised Butterfly Valve DMK Nominal Diameter Rp / - Rp.0 Printed in Germany Rösler Druck Edition 0.0 Nr. 9 77 Technical description The DUNGS DMK motorised butterfly valve is an actuator without zero
More informationThis is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
More information10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More information10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationStandardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
More informationINDUSTRIAL PNEUMATICS - valves
Ball valves Mini ball valve 6560 type Body material: Ball material: Ball seal: Spindle seal: Working temp.: Nickel-plated brass Chromium-plated brass PTFE NBR From -20 C up to +80 C General purpose valve
More informationMotorised Butterfly Valve DMK
Motorised Butterfly Valve DMK Nominal Diameter Rp / - Rp. DMK...-Q DMK...-P Printed in Germany Edition. Nr. 9 77 Technical description The DUNGS DMK motorised butterfly valve is an actuator without zero
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationPNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
More informationPneumatic Control Unit for the integrated mounting on process valves
Pneumatic Control Unit for the integrated mounting on process valves Type 890 can be combined with Compact design Pilot valve with high air flow rate Internal control air channel Optical position indicator
More informationMounting set for electropneumatical positioner type APIS
Mounting set for electropneumatical positioner type APIS a) b) Fig.1. Positioner type APIS-1X0-... with mounting kit APIS-A0000-SS(SO) (positioner mounted on column type actuator P or R by Polna Ltd company).
More informationTH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information
Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18
More informationRH 658 L, 658 LS, 658 L-01
RH 658 L, 658 LS, 658 L0 Spare parts list Rock drills 00 Atlas Copco Construction Tools AB No. 9800 08 0 000609 RH 658 L, 658 LS, 658 L0 Contents Contents General information................................................................
More informationElectropneumatic miniature control valves Mounting Connectors Minisolenoid valves Indicators LED seals LED Valve modules Poppet 3/2 single pilot 4/2 s
ElectroPneumatic Miniature Control Valves Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com /47 Electropneumatic miniature control valves Mounting Connectors Minisolenoid
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8695 can be combined with Compact stainless steel design Integrated analog valve position registration (Teach function) Coloured illuminated
More information5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4
5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4 Products 5/2 Directional-control valve, single valve, electrical connection M8 (4 poles) 5/3 Directional-control valve, single valve, electrical
More informationPL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
More informationSPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
More informationSCVA08, SCVA10, SCVA20 & SCVA32, 3/2 Solenoid actuated safety valve
SCV0, SCV0, SCV & SCV, / > > Port size: /4, /, /4 and (ISO G, NPT) > > Range of sizes - DN, 0, and > > Redundant valve assembly, pneumatic self monitoring with integrated safety silencer > > Ensures safe
More informationTEX 07PE. Spare parts list. Handheld pneumatic pick hammers. Valid from serial number
TEX 07PE Spare parts list Handheld pneumatic pick hammers TEX 07PE TEX 07PE FSH Valid from serial number 0009 0009 0 Atlas Copco Construction Tools AB No. 9800 08 0a 0005 TEX 07PE Contents Contents General
More informationOperating pressure. N/en/en
660, 8007 NAMUR /, / & / way spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
More informationOperating pressure. N/en/en
660, 8007 NAMUR /, / & / spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple design
More informationFlowtronic D 607 Series
Flowtronic D 607 Series Proportional Technology www.asco.com FLOW CONTROL: 607 SERIES FLOWTRONIC D Flowtronic D Flowtronic D is a digitally operated flow controller up to 70 SCFM (2000 Nl/min). The Flowtronic
More information3/2 5/2 SERIES 362/562
Manual and Pilot Operated Spool Valves 6L Stainless Steel and Brass Bodies /4" to " NPT / / 6/6 Features Ideal for valve automation for the oil and gas market Reliable, robust design with high flow performance
More informationBlower Purge Air Dryers
Blower Purge Air Dryers PB-250 to PB-750 Parts List November 2013 2 Table of contents 1 PB - 250... 4 2 PB - 325... 6 3 PB - 400... 8 4 PB - 500... 10 5 PB - 650... 12 6 PB - 750... 14 7 Control Panel...
More informationElectrical Actuators
4 891 SSB without auxiliary switch SSB1 with auxiliary switch Electrical Actuators for small valves types VVP45, VXP45, VMP45 (max D25, k VS = 63 m 3 /h) SSB31 SSB81 SSB61 SSB31 operating voltage AC 230
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More informationBSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
More information97105 Inline direct pneumatically actuated 3/2 and 5/2 spool valves G 1/4.G1/2, 1/4 NPT 1/2 NPT
direct pneumatically actuated 3/ and 5/ spool valves G /.G/, / NPT / NPT For single and double operated actuators Valves for safety systems up to SIL () Crossover-free switching, switch-over function guaranteed
More informationElectrical Actuators
OEM Electrical Actuators for valves VVP459..., VXP459..., VMP459..., VXG48, VXI48, VVG549 SSC319 SSC819 SSC319 operating voltage AC 230 V 3-position control signal SSC819 operating voltage AC 24 V 3-position
More informationElectrical Actuators
4 891 SSB without auxiliary switch Electrical Actuators for small valves types VVP45, VXP45, VMP45 (max D25, k VS = 63 m 3 /h) SSB1 with auxiliary switch SSB31 SSB61 SSB81 SSB31 operating voltage AC 230
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E06620N
More information97105 Inline 3/2, 5/2 & 5/3 way spool valves electromagnetic actuated, indirectly controlled G1/4, 1/4 NPT, G1/2, 1/2 NPT
70 Inline 3/, / & /3 way spool valves electromagnetic actuated, indirectly controlled G/, / NPT, G/, / NPT Main application: single and double operated actuators TÜV-approval based on type examination
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More information26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
More informationISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
More informationCAMOZZI PNEUMATIC PRODUCTS. Mechanically Operated Valves. Manually Operated Valves. Flow Control Valves and Pressure. Switches
CAMOZZI PNEUMATIC PRODUCTS Filters 358 Mechanically Operated Valves 390 Pressure Regulators 359 Manually Operated Valves 392 Lubricators 360 Automatic Valves 395 Filter / Regulators 361 Flow Control Valves
More information97105 Inline, 3/2 & 5/2 Direct pneumatically actuated spool valves
9705 Inline, 3/ & 5/ > > : /... / (ISO G/NPT) > > Main application: single and double operated actuators > > Valves for safety systems multi-channel up to SIL 3 > > Crossover-free switching > > TÜV-approval
More informationPNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
More informationDIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat
00 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V Valves for safety systems up to SIL Solenoid valve also
More information97105 NAMUR. Technical data. Ordering information and accessories See page 6 and 7
90 NAMUR /, / and / directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /, / NPT, G /, / NPT NAMUR-interface For single and double operated actuators
More informationPressure control valves type B
Pressure control valves type B Burner Components Catalogue 1 Contents Application... page 2 Design... page 2 Exploded view... page 2 Function... page 2 Technical data... page 3 p-q table... page 3 Dimension...
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More informationMultipole and Fieldbus
> Series 3 Plug-In valve islands Valve Islands > 016 Series 3 Plug-In valve islands, Multipole and Fieldbus New versions Plug-In system for Series 3 solenoid valves, G1/8 port. Valve functions: x3/, 5/
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
More informationButterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
More informationValve terminal RE-10 with Multi-pin, AS-Interface or bus connection 4 12 valve stations, 300 Nl/min (0.305 Cv)
Type of connection = AS = B1 = B6 Order code RE-10/08-M-1-060 Series Number of stations Multi-pin: 4, 6, 8, 10, 12 Bus versions: 4, 8, 12 Electrical options M-1 = Multi-pin D-Sub plug AS3 = AS-Interface
More informationProducts Available From
Products Available From Solid State Relays and I/O Modules Catalog 2 Automation Controls Catalog 2 Switches and Sensors Catalog 3 3 Motors and Fans Catalog 4 Pneumatics Catalog 4 For your copy of the catalogs,
More informationDouble piston cylinder, Series TWC Ø6-32 mm double-acting with magnetic piston cushioning: elastic
Bosch Rexroth AG Pneumatics Ambient temperature min./max. +0 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces
More informationG 1/2 30,5 A Brass NBR 0,8 3,
4/2 way poppet valves electromagnetic actuated, directly controlled /4 & /2 Working from 0 bar up Suitable for vacuum range down.33 0-2 mbar l/s Protection class : IP 65, Ex em, Ex d TEX approved (see
More informationTEX. Spare parts list. Handheld pneumatic pick hammers 03PS Atlas Copco Construction Tools AB No
TEX 0PS Spare parts list Handheld pneumatic pick hammers 0 Atlas Copco Construction Tools AB No. 9800 0976 0 004 TEX 0PS Contents Contents General information................................................................
More informationSpare Parts List Hydraulic Hammer. HM 720 Eco (V)
Spare Parts List Hydraulic Hammer HM 720 Eco (V) Pt. Id. No. 3361 8557 11 Valid from: 09/2003 GB Spare Parts List Hydraulic Hammers HM 720 Eco HM 720 Eco V E Atlas Copco Construction Tools GmbH Atlas
More informationV03, V04 and V05 Series
V03, V04 and V05 Series / and 3/ Poppet Valves Electrically Actuated G 1 8, G 1 4, CNOMO and Interface Extensive range of power and orifice size options Removable coil Manifold rail for 1 to 0 valves Operating
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More information26360, NAMUR. Technical data
66, 87 NAMUR /-, /- and / directional control valves Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G/ NAMUR-Interface For single and double operated actuators Manual
More informationTechnical features. 12/ f. N/en
/, / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface Main application: single and double operated actuators TÜV-approval based
More informationPositioner CMSX-...-C-U-F1-...
Positioner CMSX-...-C-U-F-... Festo AG & Co. KG Ruiter Straße 8 Esslingen Germany +9-0 www.festo.com Product overview. Function The CMSX digital electropneumatic positioner enables simple and efficient
More information97105 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
705 Inline 3/, 5/ & 5/3 spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Valves for safety systems up to SIL (IEC 6508) Crossover-free
More informationPositioner CMSX-...-C-U-F1-...
Positioner CMSX-...-C-U-F-.... CMSX-SE-... (linear) 5 Festo AG & Co. KG Postfach Esslingen Germany +9-0 www.festo.com (en) Operating instructions 80595 0a [80595] aj 9 8 Housing cover Inspection window
More informationSolenoid Valves PN16 for gas flow interception
s 7 684 INTELLIGAS Solenoid Valves PN16 for gas flow interception E... 2 way solenoid valves, threaded or flanged connections, brass or bronze body. 12V DC or 230V AC coil with manual reset. Normally Open
More informationQuality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
More informationAssembly instructions VOSS quick connect system 203 N
Assembly instructions VOSS quick connect system 203 N The optimized classic A. Important notices Please observe before using the quick connect system VOSS quick connect system 203 N is suitable for air
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact stainless
More informationFlow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
More informationGrease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
More informationVALVES Inline 3/2-, 5/2- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
975 Inline 3/-, 5/- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Closed crossover design Add-on manual override Rectified
More information410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-100. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
More informationSpraying device LD/U2E Arc spraying. Parts List PL EN 02
Arc spraying Parts List PL 9697 EN 02 Oerlikon Metco 6/2015 Oerlikon Metco AG Switzerland Rigackerstrasse 16 CH-5610 Wohlen +1 56 618 81 81 +1 56 618 81 00 www.oerlikon.com/metco i Warranty Disclaimer
More information1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integd mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up by automatic
More informationSpare Parts. Small Single Seat Valve SP70860-GB
Spare Parts Small Single Seat Valve SP70860-GB1 2003-09 Stop Valve 12.7-19 mm 2 Reg.: 2003-05 Intro.: 2003-05 Stop Valve 12.7-19 mm Pos. Qty. Denomination 12.7 mm 19 mm Actuator, complete... 9612-9404-01
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationOperating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationLiquid handling with modular dosing system
Liquid handling with modular dosing system You need random access and batch analyses. You want reliable error-free processes. We make your laboratory processes faster and more precise. Making laboratory
More informationTEX. Spare parts list. Handheld pneumatic pick hammers 12PE, 12PER Atlas Copco Construction Tools AB No f
TEX PE, PER Spare parts list Handheld pneumatic pick hammers 0 Atlas Copco Construction Tools AB No. 9800 08 0f 00 TEX PE, PER Contents Contents General information................................................................
More informationFlow. (l/min) (ms) N/en
66, 87 Inline / & / spool valves electromagnetic actuated, indirectly controlled G / & G / For single and double operated actuators Manual override with and without detent imple design of soft seal spool
More informationSPH/BA Motorsports. Clean-break couplings for high pressure circuits
SPH/BA Motorsports Clean-break couplings for high pressure circuits Choose SPH/BA couplings... Applications - shock absorbers, brake and hydraulic lines - lubrication and coolants Combine lightweight and
More informationSINGLE OR DOUBLE ACTING CYLINDERS, Ø 8 to 25 mm
SINGLE OR DOUBLE ACTING CYLINDERS, to mm CONFORMING WITH ISO 43 - CETOP - AFNOR STANDARDS ISOCLAIR - SERIES 435 - TYPES : C-AS, CC-AS P-GB-R5 ISOCLAIR AIR CYLINDERS to mm OPERATIONAL DIAGRAMS ( to mm)
More informationLockshield valves Series 195UM - 196UM 1195UM UM
Lockshield valves Series 9UM - 96UM 9UM - 96UM Main features - vailable in the following versions : ngle body, straight body, for iron, copper and polyethylene piping with / connection to radiator and
More informationV88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
More informationMotorised butterfly valve DMK Nominal Diameters DN 40 to DN 125
Motorised butterfly valve DMK Nominal Diameters DN 40 to DN 125 11.11 DMK...-P DMK...-Q Printed in Germany Edition 01.18 Nr. 226 595 1 6 Technical description The DUNGS DMK... motorised butterfly valve
More informationOption 2. Nil. Note 1) Option 1. Note With waterproof seal and mounting screw. With waterproof seal and mounting screw. 48 conversion adapter
Series 0-PSE00 RoHS Remote Type Multi-Channel Digital Pressure Sensor Controller How to Order Clean series 0 PSE0 0 M Input/Output specifications 0 NPN 5 outputs + Auto shift input PNP 5 outputs + Auto
More informationLevel- and temperature sensor Nivotemp NT M-XP
Level- and temperature sensor Nivotemp NT M-XP Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Automatic teach function Contact-free position sensor Compact stainless steel design AS-Interface
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8691 can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
More informationSpare parts list. Handheld pneumatic pick hammers CP 0222 CHIT, CP 0222 CHIT BS, CP 0222 CHOT BS.
Spare parts list Handheld pneumatic pick hammers CP 0 CHIT, CP 0 CHIT, CP 0 CHOT www.cp.com CP 0 CHIT, CP 0 CHIT, CP 0 CHOT 9800 00 0 CP 0 CHIT, CP 0 CHIT, CP 0 CHOT Contents Contents General information...............................................................
More informationSpare part catalogue GB 03/2007. Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7
Spare part catalogue 0020037555.03 GB 03/2007 Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7 Content General view of sheet Page 3 04 Burner Page 4 06 Heat exchanger Page 6 07 Casing
More information