G 1/2 30,5 A Brass NBR 0,8 3,

Transcription

1 4/2 way poppet valves electromagnetic actuated, directly controlled /4 & /2 Working from 0 bar up Suitable for vacuum range down mbar l/s Protection class : IP 65, Ex em, Ex d TEX approved (see solenoid table) Suited for outdoor installation pproval depends on magnetic system, see page 2! Technical features Medium: For neutral gaseous and liquid fluids Operation: Solenoid, directly controlled Operating pressure: 25 bar max. Nominal size: mm Port size: /4... /2 Mounting position: Optional, preferably vertical Flow direction: Fixed : M20x,5, /2 NPT Fluid/ambient temperature: Solenoid operators: see table epending on solenoid system ir supply must be dry enough to avoid ice formation at temperatures below +2. For outdoor installations must be protected all s against the penetration of moisture and a solenoid with IP66 protection must be used! Materials: Housing: rass (Ms 58) Inner parts: rass or stainless steel.404 (430 F) Seat seal: NR Technical data Symbol Port size Solenoid Nominal Operating pressure Materials kv-value s *) group Size min. max. Valve- (v (US) = kv x,2 (kg) (mm) (bar) (bar) Housing Seat seal 2 3 /4 30, rass NR 0,5 2, /2 30, rass NR 0,8 3, /2 38, rass NR 0,9 4, *) When ordering please indicate solenoid, voltage and current type (frequency). 5/ d without notice, the specifications given in this document. 204 Norgren mbh N/en

2 Solenoid operators Solenoids group 30,5 (W) (V) (m ) (m ) (TEX-ategory) ( ) (kg) 2,4 89 IP65 (with cable gland) M20x,5, ircuit 22,8 99 IP65 (with cable gland) M20x,5, ,4 89 II2 II3 Ex e mb II T4 b Ex tb III T20 b IP 65 (with cable gland) T T5 M20x,5 2, ,8 99 II2 II3 Ex e mb II T4 b Ex tb III T20 b I IP 65 (with cable gland) T T5 M20x,5 2, IP 66 version on request Solenoids group 30,5 (W) (V) Solenoids group 38,5 2,4 89 II2 II2 22,8 99 II2 II2 *6) able gland not supplied, see table»ccessories«(w) (V) (m ) (m ) (m ) (m ) (TEX-ategory) Ex d II T4 b Ex tb III T90 b IP 66 (with cable gland) Ex d II T4 b Ex tb III T90 b IP 66 (with cable gland) (TEX-ategory) 38,7 64 IP 65 (with cable gland) Fluid max. +80 ( ) (kg) /2 NPT *6) 3, /2 NPT *6) 3, ( ) ircuit ircuit (kg) M20x,5 2, , 69 IP 65 (with cable gland) Fluid max. +80 M20x,5 2, ,7 64 II2 II2 Ex e mb II T4 b IP65 (with cable gland) M20x,5 *6) 3, , 69 II2 II2 Ex e mb II T4 b IP65 (with cable gland) M20x,5 *6) 3, *6) able gland not supplied, see table»ccessories«ip 66 version on request pprovals pprovals atasheet TEX IEEx FM 43x, 44x KEM 03 TEX 06 X IEEx EK.0066X N/en x, 68x VS 2 TEX E 068 X N/en xx, 57x EKR VS 08 TEX E 7 N/en N/en without notice, the specifications given in this document. 204 Norgren mbh d 5/4

3 ccessories able gland protection class IP65 Ms nickel plated brass able gland protection class (TEX) Ms nickel plated brass Port size able Ø Protection class able Ø M 20x,5 6,5...9,5 mm II2 Ex e mm M 20x,5 9,0...3 mm II2 Ex d mm /2-4-NPT II2 Ex d 7,5...,9 mm Silencer *) Exhaust guard *2) Page 5 Page 5 M/S4 / (/2, /2 NPT) /S4 /2 NPT *) For indoors use only *2) For outdoors use, opening pressure ~ 0,2 bar s for valves T ø 6,5 N E M ø P s solenoids see page 4 2 For port size, see technical data F 2 K L R S s E F J K L M N Ø P R S T / d without notice, the specifications given in this document. N/en

4 s for solenoid operators ø 86 4,5 50 ø ø 30, ø 30, /2-4 NPT ø 92 ø 92 ~ M ~ Solenoid 48x Ø 30,5 mm ø 38,7 ø 38,7 ircuit s N/en without notice, the specifications given in this document. 204 Norgren mbh d 5/4

5 able gland only ø M20 x, ,5... 9, M20 x,5 6, M20 x, M20 x, /2-4 NPT ,5..., Silencer : M/S2, M/S4, /S2, /S4 Exhaust guard : , ø ø Ø (g) /4 7 35,5 5,5 2,9 M/S2 /4 NPT 7 35,5 5,5 2,9 /S2 / ,5 M/S4 /2 NPT ,5 /S4 Suitable for Ø (g) /4 /4, /4 NPT 0 26, /2 /2, /2 NPT 2 33, Warning These products are intended for use in industrial compressed air and fluid systems only. o not use these products where values can exceed those listed under Technical features/data. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 5/ d without notice, the specifications given in this document. N/en