CA Endevor Software Change Manager 15.1 CA RS 1306 Service List

Transcription

1 CA RS 1306 Service List 22:16 Tuesday, July 2, Description Hiper 15.1 RO53756 MISSING ELEMENT ACTION BACKOUT/IN EXIT POINT RO53783 PACKAGE PANEL FLOW INCONSISTENCY RO54165 VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES RO54537 WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED RO54631 ENDEVOR OPTIONS MENU NOT CONSISTENT RO54760 REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL RO55137 'HIDE X' SUPPORT AND OTHER PANEL CHANGES RO55620 LIST ENV DETAILS USING EN$TROPT DD RO55758 VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG RO55814 C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE RO55818 THE API AND CSV UTILITY SMF OUTPUT IS INCORRECT RO55858 PDM (C1G0165E) - PROCESSOR GRP NOT FOUND RO55862 CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS RO56058 REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT RO56158 THE CSV LIST DESTINATION FUNCTION CREATES DUPLICATE HEADERS RO56341 PANEL C1SE5101 UNABLE TO SORT RO56730 FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT RO56731 FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT RO57494 RESET OF PROMOTION PKG WITH EXEC-FAILED STATUS UPDATES SCL The CA RS 1306 service count for this release is 19

2 CA Endevor Software Change Manager 15.0 CA RS 1306 Service List 22:16 Tuesday, July 2, Description Hiper 15.0 RO51377 WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED RO54164 VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES RO54629 ENDEVOR OPTIONS MENU NOT CONSISTENT RO54759 REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL RO54945 VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG RO55136 'HIDE X' SUPPORT AND OTHER PANEL CHANGES RO55619 LIST ENV DETAILS USING EN$TROPT DD RO55813 C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE RO55857 PDM (C1G0165E) - PROCESSOR GRP NOT FOUND RO55863 CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS RO56057 REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT RO56340 PANEL C1SE5101 UNABLE TO SORT The CA RS 1306 service count for this release is 12

3 CA Endevor Software Change Manager CA RS 1306 Service List for CSIQF00 22:16 Tuesday, July 2, FMID Service Description Hiper CSIQF00 RO51377 WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED RO54164 VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES RO54629 ENDEVOR OPTIONS MENU NOT CONSISTENT RO54945 VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG RO55136 'HIDE X' SUPPORT AND OTHER PANEL CHANGES RO55619 LIST ENV DETAILS USING EN$TROPT DD RO55813 C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE RO55857 PDM (C1G0165E) - PROCESSOR GRP NOT FOUND RO55863 CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS RO56057 REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT RO56340 PANEL C1SE5101 UNABLE TO SORT The CA RS 1306 service count for this FMID is 11

4 CA Endevor Software Change Manager CA RS 1306 Service List for CSIQF01 22:16 Tuesday, July 2, FMID Service Description Hiper CSIQF01 RO54759 REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL The CA RS 1306 service count for this FMID is 1

5 CA Endevor Software Change Manager CA RS 1306 Service List for CSIQF10 22:16 Tuesday, July 2, FMID Service Description Hiper CSIQF10 RO53756 MISSING ELEMENT ACTION BACKOUT/IN EXIT POINT RO53783 PACKAGE PANEL FLOW INCONSISTENCY RO54165 VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES RO54537 WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED RO54631 ENDEVOR OPTIONS MENU NOT CONSISTENT RO55137 'HIDE X' SUPPORT AND OTHER PANEL CHANGES RO55620 LIST ENV DETAILS USING EN$TROPT DD RO55758 VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG RO55814 C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE RO55818 THE API AND CSV UTILITY SMF OUTPUT IS INCORRECT RO55858 PDM (C1G0165E) - PROCESSOR GRP NOT FOUND RO55862 CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS RO56058 REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT RO56158 THE CSV LIST DESTINATION FUNCTION CREATES DUPLICATE HEADERS RO56341 PANEL C1SE5101 UNABLE TO SORT RO56730 FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT RO57494 RESET OF PROMOTION PKG WITH EXEC-FAILED STATUS UPDATES SCL The CA RS 1306 service count for this FMID is 17

6 CA Endevor Software Change Manager CA RS 1306 Service List for CSIQF11 22:16 Tuesday, July 2, FMID Service Description Hiper CSIQF11 RO54760 REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL RO56731 FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT The CA RS 1306 service count for this FMID is 2

7 CA RS PTF RO :16 Tuesday, July 2, RO53756 RO53756 M.C.S. ENTRIES = ++PTF (RO53756) MISSING ELEMENT ACTION BACKOUT/IN EXIT POINT The package exits are not being called for element action BACKIN and BACKOUT actions. Package BACKIN and BACKOUT exits are not being called when element action BACKIN or BACKOUT are being performed Users who depend on these exits to perform validations cannot do these validations for element action backout/backing Prohibit element action backout or backin using ESI. Solution Description: The correction introduces a new flag in the PECBDS: - PECBEABX (Element Action backouts requested) or - PECB-REQ-ELEMENT-ACTION-BACKOUT-BACKIN next to the existing BACKIN/BACKOUT exit point request flags: - PECBBIBE (backin before) - PECBBIAF (backin after) - PECBBOBE (backout before) - PECBBOAF (backout after) - PECB-BEFORE-BACKIN - PECB-AFTER-BACKIN - PECB-BEFORE-BACKOUT - PECB-AFTER-BACKOUT If one of these 4 exit points has been activated and also PECBEABX has been set to 'Y', then the exit will also get control for Element Action BACKIN or BACKOUT. If only PECBEABX has been set to Y, and none of the other flags have been set to Y the exit point will not be active. The element action backin/backout exit point will be called for every Element Action backin/backout that is being performed. It will not be called for package backin/backout. The element action backin/backout exit points will have a function code of BACKIN or BACKOUT. The subfunction code will be set to EABKI or EABKO. The element action backin/backout exit point will upon entry have its fifth parameter pointing to the action record ($PACTREC) of the element action being backed in/out. Element action backin/backout exit points have the same rights as package backin/backout exit points. PRODUCT(S) AFFECTED: CA Endevor SCM Version 15.0 CA Endevor SCM Version 15.1 ENDBAS 6758 Copyright (C) 2013 CA. All rights reserved. R00091-SCM151-SP1 DESC(MISSING ELEMENT ACTION BACKOUT/IN EXIT POINT). FMID (CSIQF10) PRE ( RO50411 RO50944 RO52527 ) SUP ( AR52527 RO49530 RO50036 RO57023 RO57494 TR49530 TR50036 TR53756 TR57023 TR57494 ) ++HOLD (RO53756) SYSTEM FMID(CSIQF10) REASON (ACTION ) DATE (13112) COMMENT ( This correction installs updated COPYBOOK member(s) into the CSIQOPTN library. After the SMP/E APPLY of this correction, all COBOL Exits or API programs WILL require a re-compile and link in order to ensure proper execution. ).

8 CA RS PTF RO :16 Tuesday, July 2, RO53783 RO53783 M.C.S. ENTRIES = ++PTF (RO53783) PACKAGE PANEL FLOW INCONSISTENCY Problem Description: From the PACKAGE SELECTION LIST (C1SP0200) one can shift right by hitting F11 to see more information (C1SP0201). After returning (F3) to the Package Foreground Options Menu (Panel C1SP0000), a DISPLAY request does not return to the prior (C1SP0201) panel as it did in previous releases. You are returned to panel C1SP0200 instead of C1SP0201 You must hit F11 to see more information None PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 ENDBAS 6747 Copyright (C) 2013 CA. All rights reserved. R00092-SCM151-SP1 DESC(PACKAGE PANEL FLOW INCONSISTENCY). FMID (CSIQF10) SUP ( TR53783 )

9 CA RS PTF RO :16 Tuesday, July 2, RO54165 RO54165 M.C.S. ENTRIES = ++PTF (RO54165) VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES If a version of an element is being moved from the entry stage and a new version of the element is added while the move is still in progress, the new version is created as VVLL 0100, as if it is a brand new element. A subsequent move of this newly added element results in sync error SMGR116E, since its base level does not match the current level at the target. ADD action ends with RC 0 but vvll 0100 is created. If the element is subsequently moved it gets a sync error (SMGR116E). The element would have to be deleted and re-added to fix the sync problem. The only way to avoid the problem is to ensure that a new version is not added while the previous version is being moved. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6744 Copyright (C) 2013 CA. All rights reserved. R00094-SCM151-SP1 DESC(VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES). FMID (CSIQF10) PRE ( RO50150 ) SUP ( TR54165 )

10 CA RS PTF RO :16 Tuesday, July 2, RO54537 RO54537 M.C.S. ENTRIES = ++PTF (RO54537) WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED When a package ID is reused and that package or another package in the same backout chain is shipped, two incorrect results may occur: 1) Ship may finish successfully while it should fail. 2) Wrong members can be shipped to the remote site. Note: Reusing a package ID means that the package was executed, then reset (or deleted and redefined) and subsequently the same package name is used for a second execution. In addition, messages C1X0516E and C1X0517I may show incorrect information. The correction for this problem replaces the messages with correct ones: C1BMX91I, C1BMX92I and C1BMX35E. Some members are shipped to the remote library, while they should not be shipped at all or different versions of them should be shipped. Messages C1X0516E and C1X0517I may show incorrect information. Wrong contents in the production libraries or incorrect information in the ship report. If wrong members were shipped, BACKIN the package before shipping it. Generally, not reusing package names is a prevention. PRODUCTS AFFECTED: CA Endevor Software Change Manager, Version 15.0 CA Endevor Software Change Manager, Version 15.1 ENDBAS 6703 Copyright (C) 2013 CA. All rights reserved. R00096-SCM151-SP1 DESC(WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED). FMID (CSIQF10) PRE ( RO48793 RO48898 RO50150 ) SUP ( RO52566 TR52566 TR54537 )

11 CA RS PTF RO :16 Tuesday, July 2, RO54631 RO54631 M.C.S. ENTRIES = ++PTF (RO54631) ENDEVOR OPTIONS MENU NOT CONSISTENT Endevor option menu columns and colors are not consistent. Some panels have the "OPTION" header shifted one place to the right while other panels have their list of options not highlighted (blue instead of white) and/or not aligned properly. Need to edit the affected panels to fix the issues. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 ENDBAS 6764 Copyright (C) 2013 CA. All rights reserved. R00097-SCM151-SP1 DESC(ENDEVOR OPTIONS MENU NOT CONSISTENT). FMID (CSIQF10) SUP ( TR54449 TR54631 ) ++HOLD (RO54631) SYSTEM FMID(CSIQF10) REASON (ACTION ) DATE (13031) COMMENT ( This correction delivers updated PANEL(S) and is installed into the CSIQPENU library. If you have customized versions of the PANEL(S) in the library, please make a backup copy of them BEFORE the SMP/E APPLY. After the PTF is applied, make your customizations into the newly delivered member(s) as desired. ).

12 CA RS PTF RO :16 Tuesday, July 2, RO54760 RO54760 M.C.S. ENTRIES = ++PTF (RO54760) REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL This is recurrence of problem The problems 5862 and 5935 affecting various messages in Quick-Edit and corrected for release 12.0 and 14.0, are not fixed for release 15.0 and Therefore such messages are in mixed case, causing them to be unreadable when the Japanese version of Endevor is being used. Unreadable messages using the Japanese version. Confusion for Japanese clients using double byte Japanese panels. Pressing CNTL+PF3 will show the messages in English, but will make the panel headers unreadable. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 ENDBAS 6769 Copyright (C) 2013 CA. All rights reserved. R00100-SCM151-SP1 DESC(REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL). FMID (CSIQF11) PRE ( RO49068 ) SUP ( TR54760 ) ++HOLD (RO54760) SYSTEM FMID(CSIQF11) REASON (ACTION ) DATE (13036) COMMENT ( This correction delivers updated PANEL(S) and is installed into the CSIQPJPN LIBRARY. IF YOU HAVE CUSTOMIZED VERSIONS OF THE PANEL(S) IN the library, please make a backup copy of them BEFORE the SMP/E APPLY. After the PTF is applied, make your customizations into the newly delivered member(s) as desired. ).

13 CA RS PTF RO :16 Tuesday, July 2, RO55137 RO55137 M.C.S. ENTRIES = ++PTF (RO55137) 'HIDE X' SUPPORT AND OTHER PANEL CHANGES Execution of command ISPF Command 'HIDE X' from a Quick-Edit EDIT session or when editing a package results in error message "HIDEX not enabled". The problem started with z/os 1.9. Also, when using Quick-Edit's EDIT action, the COLUMNS field at the top is not correctly placed. ISPF issues message "HIDEX not enabled" when command "HIDE X" is entered The programmers cannot use standard EDIT functions. None PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Version 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 5671 Copyright (C) 2013 CA. All rights reserved. R00105-SCM151-SP1 DESC('HIDE X' SUPPORT AND OTHER PANEL CHANGES). FMID (CSIQF10) SUP ( TR55137 ) ++HOLD (RO55137) SYSTEM FMID(CSIQF10) REASON (ACTION ) DATE (13050) COMMENT ( This correction delivers updated PANEL(S) and is installed into the CSIQPENU library. If you have customized versions of the PANEL(S) in the library, please make a backup copy of them BEFORE the SMP/E APPLY. After the PTF is applied, make your customizations into the newly delivered member(s) as desired. ).

14 CA RS PTF RO :16 Tuesday, July 2, RO55620 RO55620 M.C.S. ENTRIES = ++PTF (RO55620) LIST ENV DETAILS USING EN$TROPT DD The Endevor options trace (EN$TROPT) used for troubleshooting issues is printing environment definitions information only when a special trigger DD statement (EN$TROPE) is specified along with the EN$TROPT DD statement. EN$TROPT should print the environment definitions information without a special trigger (EN$TROPE) DD statement. NONE. NONE. NONE. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6793 Copyright (C) 2013 CA. All rights reserved. R00109-SCM151-SP1 DESC(LIST ENV DETAILS USING EN$TROPT DD). FMID (CSIQF10) SUP ( RO52636 TR52636 TR55620 )

15 CA RS PTF RO :16 Tuesday, July 2, RO55758 RO55758 M.C.S. ENTRIES = ++PTF (RO55758) VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG The CCI PTF TR/RO53976 or its prerequisite TR49526 adds validation which should help avoid an abend in CAS9VTAM for the SEND request. This new validation causes that the notification to the sender is bypassed and the SEND is suspended. The validation in the CCI is going to be improved so this hang will not happen, but to expedite the resolution, Endevor API can be improved so it can cope with the hang. The CM Enterprise Workbench (CMEW) started task hangs. User cannot login into the CMEW. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 ENDBAS 6779 Copyright (C) 2013 CA. All rights reserved. R00111-SCM151-SP1 DESC(VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG). FMID (CSIQF10) PRE ( RO53251 ) SUP ( TR55758 )

16 CA RS PTF RO :16 Tuesday, July 2, RO55814 RO55814 M.C.S. ENTRIES = ++PTF (RO55814) C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE When a legitimate Footprint error occurs during a TRANSFER to an ARCHIVE file, a subsequent TRANSFER from the ARCHIVE file will not work correctly. This occurs because the Footprinted element being tranferred from the ARCHIVE file receives a sequence error (C1Y0003E). The sequence error causes the next element eligible for transfer to be skipped. A C1Y0003E error is issued due to the sequence error; the next element record is not TRANSFERred, but any subsequent TRANSFERs work correctly. An ELEMENT that should have been transferred, does not get transferred, and that fact may be easily missed. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6777 Copyright (C) 2013 CA. All rights reserved. R00112-SCM151-SP1 DESC(C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE). FMID (CSIQF10) SUP ( TR55527 TR55814 )

17 CA RS PTF RO :16 Tuesday, July 2, RO55818 RO55818 M.C.S. ENTRIES = ++PTF (RO55818) THE API AND CSV UTILITY SMF OUTPUT IS INCORRECT The output produced by the CSV utility for LIST SMFDATA ACTIVITY is not complete for MOVE and TRANSFER actions. It contains information about the target of the element but not about the source of the element The ALSMFA_RS_Response structure fields for ACTIVITY requests as described in the API Guide are missing the same information. The SMF record contains the information for the source and the target locations but only the target location is extracted with the API and the CSV utility. Neither API ALSMFA-RS_Response structure nor the LIST SMFDATA ACTIVITY allows you to extract the source information for the MOVE and TRANSFER actions. The CONRPT 42 does not give this information either. Create A program using macro DSECT $SMFREC2 to extract this information. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 ENDBAS 6083 Copyright (C) 2013 CA. All rights reserved. R00113-SCM151-SP1 DESC(THE API AND CSV UTILITY SMF OUTPUT IS INCORRECT). FMID (CSIQF10) SUP ( TR55450 TR55818 ) ++HOLD (RO55818) SYSTEM FMID(CSIQF10) REASON (ACTION ) DATE (13065) COMMENT ( Product: CA Endevor SCM Release: 15.1 This correction delivers an updated ECHALSMF COBOL copybook which contains the LIST SMF Response Structure for programs using the Endevor API facility. User programs refering to the field name ALSMFA-RS-LL must be changed to refer to the field name ALSMFA-RS-LVL after the application the application of this correction. ).

18 CA RS PTF RO :16 Tuesday, July 2, RO55858 RO55858 M.C.S. ENTRIES = ++PTF (RO55858) PDM (C1G0165E) - PROCESSOR GRP NOT FOUND When trying to merge one or two derivations of the same type (e.g. ASMPGM) to a merge (target) location of a different type (e.g. COBCOPY), the PDM merge fails with: C1G0165E error; THE ADD ACTION CANNOT BE PERFORMED - PROC GRP xxxgrp NOT DEFINED FOR TYPE xyz AT STG 1 The action fails because the processor type associated with the derivations (ASMPGM) is being executed instead of the processor type for the merge location (COBCOPY). When the processor types are the same, the merge works fine. SYMPTOM: Since the processor type for the target location is not being executed, the action cannot be performed. PRODUCT(S) AFFECTED: CA ENDEVOR SCM Release 15.0 CA ENDEVOR SCM Release 15.1 ENDBAS 6789 Copyright (C) 2013 CA. All rights reserved. R00114-SCM151-SP1 DESC(PDM (C1G0165E) - PROCESSOR GRP NOT FOUND). FMID (CSIQF10) SUP ( TR55858 )

19 CA RS PTF RO :16 Tuesday, July 2, RO55862 RO55862 M.C.S. ENTRIES = ++PTF (RO55862) CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS CONWRITE steps may yield incorrect component information if the //C1INCLnn DD statements are concatenated, for example using ALLOC=LMAP/PMAP Input components monitored from any of the concatenated libraries except the first may be recorded as if included from the first library of the concatenation as well as the file in the concatenation where the component resides. In the following sample component list, element COPY2 is said to be included from P6790.STG1.LIB and from P6790.STG2.LIB, while in reality COPY2 only resides in P6790.STG2.LIB STEP: CONWRITE DD=C1INCL01 VOL=WRKD14 DSN=P6790.STG1.LIB MEMBER VV.LL DATE TIME SYSTEM SUBSYS ELEMENT COPY FEB13 11:04 PTEST PTEST COPY COPY FEB13 11:04 PTEST PTEST COPY2 <== error STEP: CONWRITE DD=C1INCL01 VOL=WRKD13 DSN=P6790.STG2.LIB MEMBER VV.LL DATE TIME SYSTEM SUBSYS ELEMENT COPY FEB13 11:04 PTEST PTEST COPY2 Incorrect component list information. Do not use concatenated C1INCLnn DD statements. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Version 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6790 Copyright (C) 2013 CA. All rights reserved. R00115-SCM151-SP1 DESC(CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS). FMID (CSIQF10) SUP ( TR55862 )

20 CA RS PTF RO :16 Tuesday, July 2, RO56058 RO56058 M.C.S. ENTRIES = ++PTF (RO56058) REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT Quick Edit "Will not be Generated" messages are issued when a Processor Group specifies Foreground Execution set to N for the Generate Action Mode on a Create. The Create is allowed, even though Elememnt Registration is turned on for DUPLICATE O/P TYPE across subsystems, and the created element is a duplicate. The problem is that a Registration error should be issued prior to allowing a create, regardless of the Foreground Execution value for Generate. Quick Edit issues msg "Will not be Generated" instead of ELM REGISTRATION CHK and allows the create to proceed. Note: "Will not be Generated" is actually correct but in this situation ELM REGISTRATION CHK should take precedence. Time is expended creating an element that is a duplicate. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6792 Copyright (C) 2013 CA. All rights reserved. R00117-SCM151-SP1 DESC(REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT). FMID (CSIQF10) PRE ( RO50095 RO50411 ) SUP ( TR56058 )

21 CA RS PTF RO :16 Tuesday, July 2, RO56158 RO56158 M.C.S. ENTRIES = ++PTF (RO56158) THE CSV LIST DESTINATION FUNCTION CREATES DUPLICATE HEADERS If you issue a CSV request to LIST DESTINATIONS the resultant CSV output has multiple columns with duplicate headers. The duplicates are DISP, UNIT and VOLSER. These fields occur for both the local and remote host dataset clauses. The duplicate headers need to be prefixed with 'HOST DSN' or 'REMOTE DSN' as appropriate, so that all columns have a unique name. None CIRCUMVENTION PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6736 Copyright (C) 2013 CA. All rights reserved. R00120-SCM151-SP1 DESC(THE CSV LIST DESTINATION FUNCTION CREATES DUPLICATE HEADERS). FMID (CSIQF10) PRE ( RO55818 ) SUP ( TR56158 )

22 CA RS PTF RO :16 Tuesday, July 2, RO56341 RO56341 M.C.S. ENTRIES = ++PTF (RO56341) PANEL C1SE5101 UNABLE TO SORT PROBLEM DESCRIPTION When trying to do an ESort (and EONLY, EPRINT) on panel C1SE5101 (Type Processing Sequence), the ESORT does not work. This appears to be due to the fact that the wrong table name (C1SE510Z) is coded in ESORTTBL for this panel. While not of major importance because panel C1SE5101 is intended for display only but it seems an odd oversight, and some customers might appreciate being able to use ESORT, EONLY or EPRINT especially with the introduction of CAP GTS categories in v16. ESORT - Unable to Sort EONLY - Error in TBTOP EPRINT - ISPT034; Table is not open, TBTOP issued for table C1SE5103 that is not open. PRODUCT(S) AFFECTED: CA ENDEVOR SCM Release 15.0 CA ENDEVOR SCM Release 15.1 ENDBAS 6800 Copyright (C) 2013 CA. All rights reserved. R00121-SCM151-SP1 DESC(PANEL C1SE5101 UNABLE TO SORT). FMID (CSIQF10) SUP ( TR56341 )

23 CA RS PTF RO :16 Tuesday, July 2, RO56730 RO56730 M.C.S. ENTRIES = ++PTF (RO56730) FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT In Foreground Endevor after doing list listing of an element in element selection list panel, Endevor will only show the last listing produced from processor. If a processor creates more than one listing, user will not have possibility to choose other as in QE. LL will browse the last listing directly in FG Endevor. User cannot choose other listings to view for certain element. Use the LL function in QE. PRODUCT(S) AFFECTED: CA Endevor SCM Release 14.0 CA Endevor SCM Release 15.0 ENDBAS 6620 Copyright (C) 2013 CA. All rights reserved. R00126-SCM151-SP1 DESC(FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT). FMID (CSIQF10) PRE ( RO49442 ) SUP ( TR56730 ) ++IF FMID(CSIQF11) REQ(RO56731).

24 CA RS PTF RO :16 Tuesday, July 2, RO56731 RO56731 M.C.S. ENTRIES = ++PTF (RO56731) FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT In Foreground Endevor after doing list listing of an element in element selection list panel, Endevor will only show the last listing produced from processor. If a processor creates more than one listing, user will not have possibility to choose other as in QE. LL will browse the last listing directly in FG Endevor. User cannot choose other listings to view for certain element. Use the LL function in QE. PRODUCT(S) AFFECTED: CA Endevor SCM Release 14.0 CA Endevor SCM Release 15.0 ENDBAS 6620 Copyright (C) 2013 CA. All rights reserved. R00126-SCM151-SP1 DESC(FG ENDEVOR LL SHOWS JUST ONE LAST LISTING FOR ELEMENT). FMID (CSIQF11) SUP ( TR56731 ) ++IF FMID(CSIQF10) REQ(RO56730).

25 CA RS PTF RO :16 Tuesday, July 2, RO57494 RO57494 M.C.S. ENTRIES = ++PTF (RO57494) RESET OF PROMOTION PKG WITH EXEC-FAILED STATUS UPDATES SCL In case promotion package fails during execution (e.g. element in package was modified), the package will be in the EXECUTED/EXEC-FAILED status. If we will perform a RESET action of the package in this situation, the RESET is treated as a part of the promotion package execution logic. This means that the FROM location of the MOVE SCL in the package is updated to the next stage. The promotion package SCL is changed after the RESET action. The subsequent CAST of the package can fail due to changed SCL. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 ENDBAS 6809 Copyright (C) 2013 CA. All rights reserved. R00136-SCM151-SP1 DESC(RESET OF PROMOTION PKG WITH EXEC-FAILED STATUS UPDATES SCL). FMID (CSIQF10) PRE ( RO52527 ) SUP ( RO49530 RO57023 TR49530 TR57023 TR57494 )

26 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO51377 RO51377 M.C.S. ENTRIES = ++PTF (RO51377) WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED When a package ID is reused and that package or another package in the same backout chain is shipped, two incorrect results may occur: 1) Ship may finish successfully while it should fail. 2) Wrong members can be shipped to the remote site. Note: Reusing a package ID means that the package was executed, then reset (or deleted and redefined) and subsequently the same package name is used for a second execution. In addition, messages C1X0516E and C1X0517I may show incorrect information. The correction for this problem replaces the messages with correct ones: C1BMX91I, C1BMX92I and C1BMX35E. Some members are shipped to the remote library, while they should not be shipped at all or different versions of them should be shipped. Messages C1X0516E and C1X0517I may show incorrect information. Wrong contents in the production libraries or incorrect information in the ship report. If wrong members were shipped, BACKIN the package before shipping it. Generally, not reusing package names is a prevention. PRODUCTS AFFECTED: CA Endevor Software Change Manager, Version 15.0 CA Endevor Software Change Manager, Version 15.1 ENDBAS 6703 Copyright (C) 2013 CA. All rights reserved. R00289-SCM150-SP1 DESC(WRONG MEMBERS CAN BE SHIPPED WHEN PACKAGE ID WAS REUSED). FMID (CSIQF00) PRE ( RO29420 RO29532 RO31287 RO33156 RO38473 RO45948 RO48672 ) SUP ( RO29848 RO34636 RO53004 TR29848 TR34636 TR51377 TR53004 )

27 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO54164 RO54164 M.C.S. ENTRIES = ++PTF (RO54164) VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES If a version of an element is being moved from the entry stage and a new version of the element is added while the move is still in progress, the new version is created as VVLL 0100, as if it is a brand new element. A subsequent move of this newly added element results in sync error SMGR116E, since its base level does not match the current level at the target. ADD action ends with RC 0 but vvll 0100 is created. If the element is subsequently moved it gets a sync error (SMGR116E). The element would have to be deleted and re-added to fix the sync problem. The only way to avoid the problem is to ensure that a new version is not added while the previous version is being moved. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6744 Copyright (C) 2013 CA. All rights reserved. R00313-SCM150-SP1 DESC(VVLL INCORRECT WHEN ADD STARTS BEFORE MOVE FINISHES). FMID (CSIQF00) PRE ( RO29420 RO48672 ) SUP ( RO36779 RO38233 TR36779 TR38233 TR54164 )

28 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO54629 RO54629 M.C.S. ENTRIES = ++PTF (RO54629) ENDEVOR OPTIONS MENU NOT CONSISTENT Endevor option menu columns and colors are not consistent. Some panels have the "OPTION" header shifted one place to the right while other panels have their list of options not highlighted (blue instead of white) and/or not aligned properly. Need to edit the affected panels to fix the issues. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 ENDBAS 6764 Copyright (C) 2013 CA. All rights reserved. R00319-SCM150-SP1 DESC(ENDEVOR OPTIONS MENU NOT CONSISTENT). FMID (CSIQF00) SUP ( TR54448 TR54629 ) ++HOLD (RO54629) SYSTEM FMID(CSIQF00) REASON (ACTION ) DATE (13031) COMMENT ( This correction delivers updated PANEL(S) and is installed into the CSIQPENU library. If you have customized versions of the PANEL(S) in the library, please make a backup copy of them BEFORE the SMP/E APPLY. After the PTF is applied, make your customizations into the newly delivered member(s) as desired. ).

29 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO54759 RO54759 M.C.S. ENTRIES = ++PTF (RO54759) REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL This is recurrence of problem The problems 5862 and 5935 affecting various messages in Quick-Edit and corrected for release 12.0 and 14.0, are not fixed for release 15.0 and Therefore such messages are in mixed case, causing them to be unreadable when the Japanese version of Endevor is being used. Unreadable messages using the Japanese version. Confusion for Japanese clients using double byte Japanese panels. Pressing CNTL+PF3 will show the messages in English, but will make the panel headers unreadable. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 ENDBAS 6769 Copyright (C) 2013 CA. All rights reserved. R00320-SCM150-SP1 DESC(REGRESSION PROBLEM: LOWERCASE MESSAGES IN QE FOR JAPAN PANEL). FMID (CSIQF01) PRE ( RO30060 RO34663 RO36414 ) SUP ( TR54759 ) ++HOLD (RO54759) SYSTEM FMID(CSIQF01) REASON (ACTION ) DATE (13036) COMMENT ( This correction delivers updated PANEL(S) and is installed into the CSIQPJPN LIBRARY. IF YOU HAVE CUSTOMIZED VERSIONS OF THE PANEL(S) IN the library, please make a backup copy of them BEFORE the SMP/E APPLY. After the PTF is applied, make your customizations into the newly delivered member(s) as desired. ).

30 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO54945 RO54945 M.C.S. ENTRIES = ++PTF (RO54945) VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG The CCI PTF TR/RO53976 or its prerequisite TR49526 adds validation which should help avoid an abend in CAS9VTAM for the SEND request. This new validation causes that the notification to the sender is bypassed and the SEND is suspended. The validation in the CCI is going to be improved so this hang will not happen, but to expedite the resolution, Endevor API can be improved so it can cope with the hang. The CM Enterprise Workbench (CMEW) started task hangs. User cannot login into the CMEW. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 ENDBAS 6779 Copyright (C) 2013 CA. All rights reserved. R00322-SCM150-SP1 DESC(VALIDATION ADDED BY CCI TR/RO53976 CAUSES CMEW STC TO HANG). FMID (CSIQF00) PRE ( RO37073 RO54520 ) SUP ( TR54945 )

31 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO55136 RO55136 M.C.S. ENTRIES = ++PTF (RO55136) 'HIDE X' SUPPORT AND OTHER PANEL CHANGES Execution of command ISPF Command 'HIDE X' from a Quick-Edit EDIT session or when editing a package results in error message "HIDEX not enabled". The problem started with z/os 1.9. Also, when using Quick-Edit's EDIT action, the COLUMNS field at the top is not correctly placed. ISPF issues message "HIDEX not enabled" when command "HIDE X" is entered The programmers cannot use standard EDIT functions. None PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Version 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 5671 Copyright (C) 2013 CA. All rights reserved. R00324-SCM150-SP1 DESC('HIDE X' SUPPORT AND OTHER PANEL CHANGES). FMID (CSIQF00) SUP ( TR55136 ) ++HOLD (RO55136) SYSTEM FMID(CSIQF00) REASON (ACTION ) DATE (13050) COMMENT ( This correction delivers updated PANEL(S) and is installed into the CSIQPENU library. If you have customized versions of the PANEL(S) in the library, please make a backup copy of them BEFORE the SMP/E APPLY. After the PTF is applied, make your customizations into the newly delivered member(s) as desired. ).

32 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO55619 RO55619 M.C.S. ENTRIES = ++PTF (RO55619) LIST ENV DETAILS USING EN$TROPT DD The Endevor options trace (EN$TROPT) used for troubleshooting issues is printing environment definitions information only when a special trigger DD statement (EN$TROPE) is specified along with the EN$TROPT DD statement. EN$TROPT should print the environment definitions information without a special trigger (EN$TROPE) DD statement. NONE. NONE. NONE. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6793 Copyright (C) 2013 CA. All rights reserved. R00327-SCM150-SP1 DESC(LIST ENV DETAILS USING EN$TROPT DD). FMID (CSIQF00) PRE ( RO29549 RO33768 ) SUP ( RO52638 TR52634 TR52638 TR55619 )

33 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO55813 RO55813 M.C.S. ENTRIES = ++PTF (RO55813) C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE When a legitimate Footprint error occurs during a TRANSFER to an ARCHIVE file, a subsequent TRANSFER from the ARCHIVE file will not work correctly. This occurs because the Footprinted element being tranferred from the ARCHIVE file receives a sequence error (C1Y0003E). The sequence error causes the next element eligible for transfer to be skipped. A C1Y0003E error is issued due to the sequence error; the next element record is not TRANSFERred, but any subsequent TRANSFERs work correctly. An ELEMENT that should have been transferred, does not get transferred, and that fact may be easily missed. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6777 Copyright (C) 2013 CA. All rights reserved. R00329-SCM150-SP1 DESC(C1Y0003E ERROR ON TRANSFER FROM ARCHIVE FILE). FMID (CSIQF00) PRE ( RO29532 ) SUP ( TR55526 TR55813 )

34 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO55857 RO55857 M.C.S. ENTRIES = ++PTF (RO55857) PDM (C1G0165E) - PROCESSOR GRP NOT FOUND When trying to merge one or two derivations of the same type (e.g. ASMPGM) to a merge (target) location of a different type (e.g. COBCOPY), the PDM merge fails with: C1G0165E error; THE ADD ACTION CANNOT BE PERFORMED - PROC GRP xxxgrp NOT DEFINED FOR TYPE xyz AT STG 1 The action fails because the processor type associated with the derivations (ASMPGM) is being executed instead of the processor type for the merge location (COBCOPY). When the processor types are the same, the merge works fine. SYMPTOM: Since the processor type for the target location is not being executed, the action cannot be performed. PRODUCT(S) AFFECTED: CA ENDEVOR SCM Release 15.0 CA ENDEVOR SCM Release 15.1 ENDBAS 6789 Copyright (C) 2013 CA. All rights reserved. R00330-SCM150-SP1 DESC(PDM (C1G0165E) - PROCESSOR GRP NOT FOUND). FMID (CSIQF00) SUP ( RO31289 TR31289 TR48221 TR55857 )

35 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO55863 RO55863 M.C.S. ENTRIES = ++PTF (RO55863) CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS CONWRITE steps may yield incorrect component information if the //C1INCLnn DD statements are concatenated, for example using ALLOC=LMAP/PMAP Input components monitored from any of the concatenated libraries except the first may be recorded as if included from the first library of the concatenation as well as the file in the concatenation where the component resides. In the following sample component list, element COPY2 is said to be included from P6790.STG1.LIB and from P6790.STG2.LIB, while in reality COPY2 only resides in P6790.STG2.LIB STEP: CONWRITE DD=C1INCL01 VOL=WRKD14 DSN=P6790.STG1.LIB MEMBER VV.LL DATE TIME SYSTEM SUBSYS ELEMENT COPY FEB13 11:04 PTEST PTEST COPY COPY FEB13 11:04 PTEST PTEST COPY2 <== error STEP: CONWRITE DD=C1INCL01 VOL=WRKD13 DSN=P6790.STG2.LIB MEMBER VV.LL DATE TIME SYSTEM SUBSYS ELEMENT COPY FEB13 11:04 PTEST PTEST COPY2 Incorrect component list information. Do not use concatenated C1INCLnn DD statements. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Version 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6790 Copyright (C) 2013 CA. All rights reserved. R00331-SCM150-SP1 DESC(CONWRITE WITH CONCATENATED FILES GIVES INCORRECT COMPONENTS). FMID (CSIQF00) SUP ( TR55863 )

36 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO56057 RO56057 M.C.S. ENTRIES = ++PTF (RO56057) REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT Quick Edit "Will not be Generated" messages are issued when a Processor Group specifies Foreground Execution set to N for the Generate Action Mode on a Create. The Create is allowed, even though Elememnt Registration is turned on for DUPLICATE O/P TYPE across subsystems, and the created element is a duplicate. The problem is that a Registration error should be issued prior to allowing a create, regardless of the Foreground Execution value for Generate. Quick Edit issues msg "Will not be Generated" instead of ELM REGISTRATION CHK and allows the create to proceed. Note: "Will not be Generated" is actually correct but in this situation ELM REGISTRATION CHK should take precedence. Time is expended creating an element that is a duplicate. PRODUCT(S) AFFECTED: CA Endevor Software Change Manager Release 15.0 CA Endevor Software Change Manager Release 15.1 ENDBAS 6792 Copyright (C) 2013 CA. All rights reserved. R00335-SCM150-SP1 DESC(REGISTRATION CHECK SOMETIMES SKIPPED IN QUICKEDIT). FMID (CSIQF00) PRE ( RO30581 RO32050 RO50090 RO50434 ) SUP ( TR56057 )

37 CA Endevor Software Change Manager 15.0 CA RS PTF RO :16 Tuesday, July 2, RO56340 RO56340 M.C.S. ENTRIES = ++PTF (RO56340) PANEL C1SE5101 UNABLE TO SORT PROBLEM DESCRIPTION When trying to do an ESort (and EONLY, EPRINT) on panel C1SE5101 (Type Processing Sequence), the ESORT does not work. This appears to be due to the fact that the wrong table name (C1SE510Z) is coded in ESORTTBL for this panel. While not of major importance because panel C1SE5101 is intended for display only but it seems an odd oversight, and some customers might appreciate being able to use ESORT, EONLY or EPRINT especially with the introduction of CAP GTS categories in v16. ESORT - Unable to Sort EONLY - Error in TBTOP EPRINT - ISPT034; Table is not open, TBTOP issued for table C1SE5103 that is not open. PRODUCT(S) AFFECTED: CA ENDEVOR SCM Release 15.0 CA ENDEVOR SCM Release 15.1 ENDBAS 6800 Copyright (C) 2013 CA. All rights reserved. R00338-SCM150-SP1 DESC(PANEL C1SE5101 UNABLE TO SORT). FMID (CSIQF00) SUP ( TR56340 )