CA Endevor Software Change Manager CA RS 1405 Service List

Transcription

1 CA Endevor Software Change Manager CA RS 1405 Service List Description Hiper 16.0 RO66148 CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT RO66149 CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT RO68553 LINE NUMBER INCREMENT FAILURE RO68680 TYPO TUTORIAL PANEL CITT2530 RO68770 THE BSTCOPY STEP OF PROCESSOR ALIASMOV MAY FAIL RO68778 C1G0230W MESSAGE ISSUED ERRONEOUSLY FROM LIST ACTION RO69013 ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION RO69107 C1G0148E - PROCESSOR FAILED, NOT ALWAYS ISSUED BY CAST RO69149 ISPP241 IN PANEL C1SN5100 RO69315 SOME SCL NOT EXECUTED W QUOTES IN COLUMN 72 The CA RS 1405 service count for this release is 10

2 CA Endevor Software Change Manager CA RS 1405 Service List Description Hiper 15.1 RO68550 LINE NUMBER INCREMENT FAILURE RO69010 ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION RO69324 RELEASE 15.1 PTF RO68348 MAY PREVENT PKG SHIPMENTS **HIPER** The CA RS 1405 service count for this release is 3

3 CA Endevor Software Change Manager 3 CA RS 1405 Service List for CSIQF10 FMID Service Description Hiper CSIQF10 RO69010 ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION RO69324 RELEASE 15.1 PTF RO68348 MAY PREVENT PKG SHIPMENTS **HIPER** The CA RS 1405 service count for this FMID is 2

4 CA Endevor Software Change Manager 4 CA RS 1405 Service List for CSIQF12 FMID Service Description Hiper CSIQF12 RO68550 LINE NUMBER INCREMENT FAILURE The CA RS 1405 service count for this FMID is 1

5 CA Endevor Software Change Manager 5 CA RS 1405 Service List for CSIQG00 FMID Service Description Hiper CSIQG00 RO66148 CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT RO68680 TYPO TUTORIAL PANEL CITT2530 RO68770 THE BSTCOPY STEP OF PROCESSOR ALIASMOV MAY FAIL RO68778 C1G0230W MESSAGE ISSUED ERRONEOUSLY FROM LIST ACTION RO69013 ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION RO69107 C1G0148E - PROCESSOR FAILED, NOT ALWAYS ISSUED BY CAST RO69149 ISPP241 IN PANEL C1SN5100 RO69315 SOME SCL NOT EXECUTED W QUOTES IN COLUMN 72 The CA RS 1405 service count for this FMID is 8

6 CA Endevor Software Change Manager 6 CA RS 1405 Service List for CSIQG01 FMID Service Description Hiper CSIQG01 RO66149 CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT The CA RS 1405 service count for this FMID is 1

7 CA Endevor Software Change Manager 7 CA RS 1405 Service List for CSIQG02 FMID Service Description Hiper CSIQG02 RO68553 LINE NUMBER INCREMENT FAILURE The CA RS 1405 service count for this FMID is 1

8 CA Endevor Software Change Manager CA RS PTF RO RO66148 RO66148 M.C.S. ENTRIES = ++PTF (RO66148) CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT After approving a package that is adding an element (with locking enabled) if a user tries to create an element locked by that package using QuickEdit they will get the following message: CA Endevor SCM Quick Edit ELEMENT IS LOCKED This is correct. However, if you hit PF1 to get more information the following message is displayed: ELEMENT IS LOCKED BY A CAST PKG - DISPLAY ELEMENT MASTER FOR THE PKGID This message is incorrect. Endevor failed to add the element so there is no Element Master to display. Product functions as intended, but reports incorrect information. None. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 CA Endevor SCM Release 16.0 ENDBAS 6952 Copyright (C) 2014 CA. All rights reserved. R00166-SCM160-SP1 DESC(CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT). FMID (CSIQG00) SUP ( TR66148 ) ++IF FMID(CSIQG01) REQ( RO66149).

9 CA Endevor Software Change Manager CA RS PTF RO RO66149 RO66149 M.C.S. ENTRIES = ++PTF (RO66149) CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT After approving a package that is adding an element (with locking enabled) if a user tries to create an element locked by that package using QuickEdit they will get the following message: CA Endevor SCM Quick Edit ELEMENT IS LOCKED This is correct. However, if you hit PF1 to get more information the following message is displayed: ELEMENT IS LOCKED BY A CAST PKG - DISPLAY ELEMENT MASTER FOR THE PKGID This message is incorrect. Endevor failed to add the element so there is no Element Master to display. Product functions as intended, but reports incorrect information. None. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 CA Endevor SCM Release 16.0 ENDBAS 6952 Copyright (C) 2014 CA. All rights reserved. R00166-SCM160-SP1 DESC(CIG0503E ERROR TEXT INCORRECT IN QUICKEDIT). FMID (CSIQG01) SUP ( TR66149 ) ++IF FMID(CSIQG00) REQ( RO66148).

10 CA Endevor Software Change Manager CA RS PTF RO RO68553 RO68553 M.C.S. ENTRIES = ++PTF (RO68553) LINE NUMBER INCREMENT FAILURE EINE Line number increment failure. Four digit numbers are not substituted properly during a Natural SAVE when the program is larger than 5000 lines and the number is enclosed in parenthesis. This fix implements a new keyword to be applied to the LOAD TRANSFER and UNLOAD TRANSFER commands when the new utility option L is selected: USE-LNI or USE-LINE-NUMBER-INCREMENT Line number references in the Natural program are incorrect causing catalog (compile) failure. Line number references in the Natural program are incorrect causing catalog (compile) failure. Program correction required. PRODUCT(S) AFFECTED: CA Endevor SCM Integration for Natural Release 15.0 CA Endevor SCM Integration for Natural Release 15.1 CA Endevor SCM Integration for Natural Release 16.0 SCMMNI 31 Copyright (C) 2014 CA. All rights reserved. R00206-SCM160-SP1 DESC(LINE NUMBER INCREMENT FAILURE). FMID (CSIQG02) PRE ( RO65655 ) SUP ( TR68553 )

11 CA Endevor Software Change Manager CA RS PTF RO RO68680 RO68680 M.C.S. ENTRIES = ++PTF (RO68680) TYPO TUTORIAL PANEL CITT2530 There is a Typo in the tutorial panel CITT2530, the word 'the' is duplicated in the text. TYPO at the panel CITT2530. An extra "the" in the text. Confusion None PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.0 CA Endevor SCM Release 15.1 CA Endevor SCM Release 16.0 ENDBAS 7050 Copyright (C) 2014 CA. All rights reserved. R00209-SCM160-SP1 DESC(TYPO TUTORIAL PANEL CITT2530). FMID (CSIQG00) SUP ( TR68680 ) ++HOLD (RO68680) SYSTEM FMID(CSIQG00) REASON (ACTION ) DATE (14084) COMMENT ( CA Endevor SCM Release 16.0 SEQUENCE Before Apply PURPOSE This PTF updates PANELS in the CSIQPENU library. If you have customized the PANEL(S) delivered by this PTF, you must backup your customized version of the PANEL(S) before applying this PTF to avoid losing your changes. USERS All Endevor users. AFFECTED KNOWLEDGE 1. SMP/e REQUIRED 2. Endevor Administration 3. Endevor PANELS ACCESS No special access is required. REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. Backup any customized PANELS in CSIQPENU that this PTF supplies. 2. APPLY this PTF. 3. Re-apply your customizations to the updated PANELS in CSIQPENU. ).

12 CA Endevor Software Change Manager CA RS PTF RO RO68770 RO68770 M.C.S. ENTRIES = ++PTF (RO68770) THE BSTCOPY STEP OF PROCESSOR ALIASMOV MAY FAIL The BSTCOPY step of the sample processor ALIASMOV may fail because of incorrect SYSIN data. This SYSIN data is built by program BSTTRD06 in a prior processor step. BSTTRD06 may misinterpret page headings. When using PDSMAN/FASTCOPY (RC08): FCO105I S M=(((C) 1986,,R)) FCO411A PARENTHESES ERROR When using ENDEVOR/BSTCOPY (RC12): C1X0511I S M=(((C) 1986,,R)) C1X0500E INVALID SYNTAX IN INPUT DATA When using IEBCOPY (RC08): S M=(((C) 1986,,R)) IEB110I INVALID REPLACE SPECIFIED IEB118I CONTROL STATEMENT ERROR When the ALIASMOV processor fails, it can result in the failure of the entire MOVE action. The element cannot be moved to the next location. Not all load modules are getting moved. The COMPLIST step of the processor (PRINT ELEMENT... OPTION COMPONENT) can be changed to include the NOCC option. PRODUCT(S) AFFECTED: CA Endevor SCM version 16 and lower ENDBAS 7039 Copyright (C) 2014 CA. All rights reserved. R00210-SCM160-SP1 DESC(THE BSTCOPY STEP OF PROCESSOR ALIASMOV MAY FAIL). FMID (CSIQG00) SUP ( TR68770 )

13 CA Endevor Software Change Manager CA RS PTF RO RO68778 RO68778 M.C.S. ENTRIES = ++PTF (RO68778) C1G0230W MESSAGE ISSUED ERRONEOUSLY FROM LIST ACTION When a LIST action is searching for a string (WHERE TEXT EQ) in multiple types (wildcarded TYPE) if no matching elements are found in the first type searched then a C1G0230W message (ELEMENT(S) BYPASSED, FAILED TO SATISFY "WHERE" CLAUSE) is issued erroneously and the action ends with RC 4. Everything works correctly using the existing code, except that message C1G0230W is issued in the case where all elements at an inventory location within a single SCL statement number are filtered out, although elements are selected for other inventory locations within that same SCL statement number. C1G0230W message is issued and action ends with RC 4, even though matching elements may have been found in other types. Confusion when C1G0230W is issued even though elements are found. It should only be issued if there are no matching elements at all, in all the types. None. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 CA Endevor SCM Release 16.0 ENDBAS 7016 Copyright (C) 2014 CA. All rights reserved. R00211-SCM160-SP1 DESC(C1G0230W MESSAGE ISSUED ERRONEOUSLY FROM LIST ACTION). FMID (CSIQG00) PRE ( RO58784 ) SUP ( RO65257 RO68089 TR65257 TR67813 TR68089 TR68247 TR68778 )

14 CA Endevor Software Change Manager CA RS PTF RO RO69013 RO69013 M.C.S. ENTRIES = ++PTF (RO69013) ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION A PRINT ELEMENT action can cause a storage overwrite when the C1PRINT DD statement specifies SYSOUT=, an LRECL of less than 133 and no BLKSIZE has been coded. Example: //C1PRINT DD SYSOUT=*,RECFM=FBA,LRECL=121 Depending on the position of the record buffer a storage overwrite may be detected. Another sympton is garbage being displayed at the end of the following print line: i.e.-: ******************** B O T T O M OF D A T A *********************... The PRINT ELEMENT may cause an abort or the output of the PRINT ELEMENT will contain garbage. Code a BLKSIZE of at least 133 when specifying RECFM=FB or at least 141 when specifying RECFM=VB PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 CA Endevor SCM Release 16.0 ENDBAS 7017 Copyright (C) 2014 CA. All rights reserved. R00213-SCM160-SP1 DESC(ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION). FMID (CSIQG00) PRE ( RO59695 ) SUP ( RO59915 TR59915 TR69013 )

15 CA Endevor Software Change Manager CA RS PTF RO RO69107 RO69107 M.C.S. ENTRIES = ++PTF (RO69107) C1G0148E - PROCESSOR FAILED, NOT ALWAYS ISSUED BY CAST Package CAST and INSPECT can be successfull where execution of the same package will fail. Differences specifically occur when the MOVE or DELETE processor have failed. Also Message C1G0148E states that the last generate processor has failed while this message can be issued for any failed processor type. Cast validation yields RC=0, execution fails with RC12 and C1G0148E THE LAST GENERATE PROCESSOR EXECUTION AT stg FAILED Message C1G0148 should correctly identify the failed processor. C1G0148E THE LAST gen/mov/del PROCESSOR EXECUTION AT stg FAILED Execution of Package can fail, undetected by CAST/INSPECT validation. Error message C1G0148E can be miusleading. None. PRODUCT(S) AFFECTED: CA Endevor SCM Release 16.0 ENDBAS 7044 Copyright (C) 2014 CA. All rights reserved. R00215-SCM160-SP1 DESC(C1G0148E - PROCESSOR FAILED, NOT ALWAYS ISSUED BY CAST). FMID (CSIQG00) PRE ( RO63603 RO63915 RO63968 RO64137 RO67722 ) SUP ( RO58778 RO63864 TR58778 TR63864 TR66395 TR69107 )

16 CA Endevor Software Change Manager CA RS PTF RO RO69149 RO69149 M.C.S. ENTRIES = ++PTF (RO69149) ISPP241 IN PANEL C1SN5100 Panel C1SN5100 contains a syntax error and raises ISPF error message ISPP241 Panel 'C1SN5100' error Number of.zvars field names does not equal number of "Z" in/out fields. Endevor dialog fails with the above message when selecting option 3 (batch), option 1 (build SCL) and option 3 (list member) with 'display list' field set to 'Y' Users are unable to use that particular selection list Set 'N' in the 'display list' field and enter member name. PRODUCT(S) AFFECTED: CA Endevor SCM V16.0 ENDBAS 7062 Copyright (C) 2014 CA. All rights reserved. R00216-SCM160-SP1 DESC(ISPP241 IN PANEL C1SN5100). FMID (CSIQG00) PRE ( RO62329 ) SUP ( TR69149 ) ++HOLD (RO69149) SYSTEM FMID(CSIQG00) REASON (ACTION ) DATE (14100) COMMENT ( CA Endevor SCM Release 16.0 SEQUENCE Before Apply PURPOSE This PTF updates PANELS in the CSIQPENU library. If you have customized the PANEL(S) delivered by this PTF, you must backup your customized version of the PANEL(S) before applying this PTF to avoid losing your changes. USERS All Endevor users. AFFECTED KNOWLEDGE 1. SMP/e REQUIRED 2. Endevor Administration 3. Endevor PANELS ACCESS No special access is required. REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. Backup any customized PANELS in CSIQPENU that this PTF supplies. 2. APPLY this PTF. 3. Re-apply your customizations to the updated PANELS in CSIQPENU. ).

17 CA Endevor Software Change Manager CA RS PTF RO RO69315 RO69315 M.C.S. ENTRIES = ++PTF (RO69315) SOME SCL NOT EXECUTED W QUOTES IN COLUMN 72 When a valid combination of single and double quotes ends exactly in column 72, it is possible that the SCL statements parse correctly, but not all of them will execute. Given 6 elements (1 thru 6) identical to the SCL below, in a package: MOVE ELE ELEMENT1 FROM ENV 'ENV1' SYS 'P1234' SUB 'P1234' TYP 'P1234' STA 1 OPTIONS CCID 'XXXXXX' COMMENTS "'single double quote ending in 72'" The Package Define ends with RC=0. The Package Cast ends with RC=0. However the ACTION VALIDATION only processes 3 of the 6 SCL statements The Package Execution ends with a RC=0 However only the same 3 statements (for element1,3 and 5) are processed. The parsing shows all 6 actions, but the execution only processes 3 of the SCL statements, and the step ends with RC=0. Not all the actions are processed. None. PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 CA Endevor SCM Release 16.0 ENDBAS 7053 Copyright (C) 2014 CA. All rights reserved. R00218-SCM160-SP1 DESC(SOME SCL NOT EXECUTED W QUOTES IN COLUMN 72). FMID (CSIQG00) SUP ( TR69315 )

18 CA Endevor Software Change Manager CA RS PTF RO RO68550 RO68550 M.C.S. ENTRIES = ++PTF (RO68550) LINE NUMBER INCREMENT FAILURE EINE Line number increment failure. Four digit numbers are not substituted properly during a Natural SAVE when the program is larger than 5000 lines and the number is enclosed in parenthesis. This fix implements a new keyword to be applied to the LOAD TRANSFER and UNLOAD TRANSFER commands when the new utility option L is selected: USE-LNI or USE-LINE-NUMBER-INCREMENT Line number references in the Natural program are incorrect causing catalog (compile) failure. Line number references in the Natural program are incorrect causing catalog (compile) failure. Program correction required. PRODUCT(S) AFFECTED: CA Endevor SCM Integration for Natural Release 15.0 CA Endevor SCM Integration for Natural Release 15.1 CA Endevor SCM Integration for Natural Release 16.0 SCMMNI 31 Copyright (C) 2014 CA. All rights reserved. R00264-SCM151-SP1 DESC(LINE NUMBER INCREMENT FAILURE). FMID (CSIQF12) PRE ( RO59987 RO64659 ) SUP ( RO47893 RO49099 RO65654 TR47598 TR47893 TR49099 TR65654 TR68550 )

19 CA Endevor Software Change Manager CA RS PTF RO RO69010 RO69010 M.C.S. ENTRIES = ++PTF (RO69010) ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION A PRINT ELEMENT action can cause a storage overwrite when the C1PRINT DD statement specifies SYSOUT=, an LRECL of less than 133 and no BLKSIZE has been coded. Example: //C1PRINT DD SYSOUT=*,RECFM=FBA,LRECL=121 Depending on the position of the record buffer a storage overwrite may be detected. Another sympton is garbage being displayed at the end of the following print line: i.e.-: ******************** B O T T O M OF D A T A *********************... The PRINT ELEMENT may cause an abort or the output of the PRINT ELEMENT will contain garbage. Code a BLKSIZE of at least 133 when specifying RECFM=FB or at least 141 when specifying RECFM=VB PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 CA Endevor SCM Release 16.0 ENDBAS 7017 Copyright (C) 2014 CA. All rights reserved. R00267-SCM151-SP1 DESC(ABORTS OR INCORRECT OUTPUT DURING A PRINT ELEMENT ACTION). FMID (CSIQF10) PRE ( RO56780 ) SUP ( TR69010 )

20 CA Endevor Software Change Manager CA RS PTF RO RO69324 RO69324 M.C.S. ENTRIES = ++PTF (RO69324) RELEASE 15.1 PTF RO68348 MAY PREVENT PKG SHIPMENTS RELEASE 15.1 PTF RO68348 MAY PREVENT PKG SHIPMENTS C1BX107S SHIP NOT ALLOWED FOR PACKAGE xxx ELEMENT xxx/type errors are issued erroneously. Package Ship fails None PRODUCT(S) AFFECTED: CA Endevor SCM Release 15.1 ENDBAS 7070 Copyright (C) 2014 CA. All rights reserved. R00270-SCM151-SP1 DESC(RELEASE 15.1 PTF RO68348 MAY PREVENT PKG SHIPMENTS). FMID (CSIQF10) PRE ( RO52566 RO54537 RO64781 RO68348 ) SUP ( AR68348 TR64633 TR69324 )