SureDrop Collar Break-Off Mechanism User Manual Version 1.0
|
|
- Everett Ryan
- 5 years ago
- Views:
Transcription
1 SureDrop Collar Break-Off Mechanism User Manual Version 1.0 July, 2015 Manufacturer: Advanced Telemetry Systems, Inc. 470 First Avenue North Isanti, MN
2 1.0 SD30u SureDrop Communication Software Overview This describes the ATS SureDrop software which is used to communicate with Advanced Telemetry Systems, Inc. s SureDrop Collar Break-Off mechanism. 1.1 Installation: You must install the ATS SureDrop software from Advanced Telemetry Systems, Inc. onto your hard drive in order to run the program. To start the installation, run the setup.exe program using the supplied CD and follow the instructions. When asked for the location of the installation folder use the default folder and location provided for you. The icon used to open the SureDrop software will be automatically placed on your desktop. 1.2 Operation: The SureDrop Collar Break-Off Mechanism communicates using your PC and the WS100 radio link dongle to communicate via radio wirelessly to your SureDrop mechanism. The mechanism contains a low power onboard clock that runs continuously. There are three modes of operation. 1: Sleep mode The mechanism is in sleep mode while the magnet is taped or in close proximity to the magnetic reed switch inside the SureDrop. This is the unit s lowest power mode. In this mode only the on-board clock is operating. 2: Countdown mode The mechanism is in this mode when the magnet has been removed from the SureDrop. Once the magnet is removed, the countdown timer begins running until it reaches the pre-programmed number of days until the break off event is scheduled, which should lead to the collar falling off of the animal. The power use in this mode is similar to the sleep mode. 3: PC Communication via radio - In this mode, the SureDrop Collar Break-off mechanism is communicating with the ATS SureDrop software. This mode is entered by turning on the SureDrop Collar Break-off mechanism by removing the magnet, and opening the Communication Software. This is a high power mode so its use should be limited. You may now program your SureDrop mechanism. Programming is done in the Archive SureDrop Configuration screen. Once the release date is set make sure to click on the Update Device Configuration and Clock button located at the bottom of the screen to make sure the new time is sent over to the SureDrop mechanism. The SureDrop will remain in communication mode as long as the WS100 radio link dongle is within range of the mechanism. 1.3 System Requirements: Microsoft Windows 8 or Microsoft Windows 7 or Microsoft Windows 2000 with Service Pack 4 or Microsoft Windows XP with Service Pack 2 Microsoft Excel 2
3 ATS WS100 radio link dongle. 1.4 LED Flash Definitions: ATS WS100 Radio Link Dongle Flashing Red LED Transmitting/receiving packets. Solid Yellow LED Another mechanism is within range Solid Yellow and Green LED Data packets are being transferred back and forth between the SureDrop mechanism and the PC. SureDrop Mechanism Slow Flashing Yellow LED In Transmit Mode Quick Flashing Yellow and Green LED Connected to the PC via the ATS WS100 radio link dongle. Red and Green LED On In Test Mode. Flashing Green LED and Solid Red LED Testing boost circuit. Flashing Red LED and Solid Green LED Testing firing transistor. 5 Green LED Flashes Run Mode starting. 1 Red LED flash per minute Firing circuit has failed its test and it is in run mode 1 Green LED flash per minute Firing circuit has passed its test and it is in run mode. 1 Red LED flash every 10 seconds Mechanism has fired. Note: To switch modes use a magnet on the reed switch. Make sure to hold magnet in place 5 seconds to guarantee mode change. 3
4 2.0 ATS SureDrop Collar Break-Off Mechanism Software 2.1 Establish Wireless Connection Before starting your SureDrop software attach your ATS WS100 Radio Link Dongle to your PC via a USB port. The first screen that appears when the software is run is shown below: When using the software on the PC for the first time a correct Com Port will need to be chosen so the software can communicate with the ATS WS100 Radio Link Dongle. To select the Com Port, highlight Settings in the toolbar and select Com Port from the drop down menu. This will open a dialog box listing the available com ports. Pick your com port and exit. Once you have this screen open with the Link Device Active appearing at the bottom of your screen you can proceed to the next step. To start the wireless communication with your SureDrop device remove the magnet so that it can enter the PC communication mode. 4
5 When the software detects the presence of the SureDrop device it will appear in the Window showing all the SureDrop devices in range. Click on the checkbox to select the device you are working with and turn the others off. 2.2 Viewing/Editing Your Release Time To view/edit your device s release time select View Saved Release Time and Click on the Ok button. If you are connected to your device you will get the following window: 5
6 The configuration window that appears from either reading a connected tag or reading from a saved file will look something like the screen shown below: To program your SureDrop device select your Release Date and Click on the Update Device Configuration and Clock button. 6
7 3.0 SD30u SureDrop Break-Off Mechanism Drawing o The SureDrop is shipped with some hardware; four (4) each ½ inch 6-32 screws and washers that can be used to attach the mechanism to a collar. Use the screws hole pattern shown above. Make sure to use a thread locker to make sure the screws do not back out. When the programmed release time is reached the metal holding pin will pop out, causing the SureDrop Collar Break-Off Mechanism to go from the locked position to the unlocked position. In order to function correctly, no material should span the two halves of the SureDrop shown that potentially cause it to catch or otherwise hold it together. Support: 7
8 Complete product support is available from ATS Sales and Service department. Advanced Telemetry Systems, Inc. PO Box First Ave. North Isanti, MN Phone: Fax: Web: 8
HyperBlade Bluetooth Serial Port Setup Guide For use with Scimitar Software and USB Bluetooth adapter Hyperdyne Labs 2006
HyperBlade Bluetooth Serial Port Setup Guide For use with Scimitar Software and USB Bluetooth adapter Hyperdyne Labs 2006 INTRODUCTION If you are using our USB Bluetooth adapter, this document will show
More informationTurningPoint Quick Start Guide
TurningPoint Quick Start Guide Section 1 >> Installing TurningPoint Software Section 2 >> Creating an Interactive PowerPoint Slide Section 3 >> Simulating a Group Response Session Section 4 >> Hardware
More information1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically.
1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically. If setup does not launch, use Windows Explorer to navigate to the appropriate CD- ROM
More informationFlasher PC Application
Flasher PC Application The operation and functions described in this manual are available from Software Version V2.5 onwards. Specifications & Ordering: Models, Sales Order Parts: PC-Net-014 Applications
More informationWindows XP Software Installation Instructions GCC Elite Series Printers
TM Windows XP Software Installation Instructions GCC Elite Series Printers This document is intended to provide instructions for obtaining and installing the Windows XP driver software for GCC s Elite
More informationWireless Setup Manual
Wireless Setup Manual Before you begin the wireless setup process, please choose the installation method. 1) To setup your printer using drivers from the web continue to page 2 2) To setup your printer
More informationNetworking the printer
Networking the printer General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for
More informationIR-200F IrDA Mainboard Adapter
IR-200F IrDA Mainboard Adapter The VScom IrDA Mainboard Adapter enables infrared wireless data communication by connecting the IrDA dongle to the built-in mainboard IR header connectors of your desktop
More informationPhoneLink for Outlook User Manual
PhoneLink for Outlook User Manual for use with 8810, 8610/8620, and 6210/6220 ISDN Telephones PhoneLink for Outlook is an add-in for Microsoft Outlook that manages inbound calls to multiple call appearances
More informationUser Guide for ID-e Tag List Feature
User Guide for ID-e Tag List Feature Version 2.0 Date: July 8th,2011 Tag function guide How to Tag create upload your Banned Customer list on the ID-e Reader General Description This Manual will explain
More informationQuick Reference Guide
Quick Reference Guide CONTENTS 1 WELCOME... 2 EQUIPMENT... 3 FEATURES/FUNCTIONS... 3 STATUS ACTIVITY LED... 4 SETUP... 5 CHARGING THE POWER PACK... 5 SOFTWARE INSTALLATION... 6 SOFTWARE AUTHORIZATION...
More informationSmartPick Service Interface Installation, Setup and Event Log Download, Windows XP
SmartPick Service Interface Installation, Setup and Event Log Download, Windows XP Seite: 1/15 1 Introduction 2 2 Flowchart 3 3 Installation 4 3.1 Installing the USB to Serial Adapter 4 3.2 Installing
More informationDot Matrix Indicator Programming
Dot Matrix Indicator Programming Preparation: USB Dongle and USB cable. Part No. 100-159 (see page 3 Dongle Installation Instruction ). Display Programmer V2.0 (see page 10 Display Programmer V2 Installation
More informationWord 2007 Appendix B Copy Student Files to Hard Drive
Word 2007 Appendix B Copy Student Files to Hard Drive Purpose Before you begin, you need to copy the contents of your student CD to your computer s hard drive. The following lesson will step you through
More informationBluetooth Micro Dongle User s Guide. Rating: 5V DC 80mA Made in China
Bluetooth Micro Dongle User s Guide Rating: 5V DC 80mA Made in China Introduction Package Contents USB Bluetooth adapter x 1 Installation CD x 1 (includes Bluetooth software and User s Guide) User s Guide
More informationGIGATRAK HANDHELD INSTALL AND SYNC
GIGATRAK HANDHELD INSTALL AND SYNC GIGATRAK HANDHELD INSTALL AND SYNC GigaTrak s ATS system works on mobile handheld terminals in two different ways. One option works wirelessly, but the other uses batch
More informationTechnical Bulletin DS2
Product: DS-Matrix Software TB 221 Date: July 25 th, 2012 Subject: How to Upgrade DS-Matrix Software This document describes the procedure for upgrading the DS-Matrix software. If you are upgrading from
More informationGetting Started Instructions for the Access USB and Access 2 USB Probers
Getting Started Instructions for the Access USB and Access 2 USB Probers PC Recommended Requirements The following recommendations are provided to assist you in purchasing the correct computer system to
More informationTHE HYGIENE COMPANY HYGIENE MONITOR SET UP GUIDE HYGIENE MONITOR SOFTWARE INSTALLATION GUIDE DATASHEET USER GUIDE
http://www.thehygienecompany.com/ Version 2 Tel: 0845 370 0030 E-mail: info@thehygienecompany.com THE HYGIENE COMPANY HYGIENE MONITOR SET UP GUIDE HYGIENE MONITOR SOFTWARE INSTALLATION GUIDE DATASHEET
More information700TSU INSTALLATION MANUAL
M 700TSU INSTALLATION MANUAL 2 Table of Contents Features...03 Specifications...04 Quick-Start...05 Remote Control...07 Hardware Installation...10 Software Installation...14 Touch Screen Driver Installation
More informationQuick Start Guide. v1.1. Copyright 2011 AVID Technologies, Inc. Twinsburg, Ohio USA All Rights Reserved
Quick Start Guide v1.1 Copyright 2011 Twinsburg, Ohio USA All Rights Reserved Qi Sniffer Quick Start Guide v1.1 Page 2 Overview AVID Technologies Qi Sniffer is a diagnostic tool that can be used to passively
More informationInstallation and Programming Instructions Part: Service Gateway
Installation and Programming Instructions Part: Introduction How it Works Compatible Panels The Service Gateway is a service-only application that enables a connected service PC to establish two-way communications
More informationTeamBoard Quick Start #1
www.touchboards.com 205 Westwood Ave.Long Branch, NJ 07740 1-866-942-6273 Sales@touchboards.com Quick Start #1 Welcome to! These Quick Start Cards address some basics, from installation steps to creating
More informationInterpretype Bluetooth Setup Procedure
This information is for configuring the Interpretype to communicate using the Bluetooth Connectivity Kit. To communicate using LAN or Wi-Fi in the full featured version of our software, please refer to
More informationNavigator Software User s Manual. User Manual. Navigator Software. Monarch Instrument Rev 0.98 May Page 1 of 17
User Manual Navigator Software Monarch Instrument Rev 0.98 May 2006 Page 1 of 17 Contents 1. NAVIGATOR SOFTWARE 2. INSTALLATION 3. USING NAVIGATOR SOFTWARE 3.1 STARTING THE PROGRAM 3.2 SYSTEM SET UP 3.3
More informationCESecure Quick Start Guide
CESecure Quick Start Guide Using CESecure Software CESecure software is pre-installed on CMS Products Flash or Hard Drives and does not require installation. The CESecure software moves with the encryption
More informationSTOP! Read these instructions before connecting the PR3 to your Computer
Windows 10 Installation Instructions for the PR3 NOTE: If Windows 10 installed the drivers for the PR3, these instructions are not needed. These instructions are only to be used if Windows 10 did not automatically
More informationThis manual is the property of mce systems ltd. No part of this manual may be copied, reproduced, stored in a retrieval system, translated or transmit
This manual is the property of mce systems ltd. No part of this manual may be copied, reproduced, stored in a retrieval system, translated or transmitted in any form or by any means, electronic, mechanical,
More informationRS 422/485 ComProbe. Quick Start Guide
RS 422/485 ComProbe Quick Start Guide Copyright 2000 2010 Frontline Test Equipment, Inc. All rights reserved. You may not reproduce, transmit, or store on magnetic media any part of this publication in
More informationShadow Tracker TM Premier Base
Quick Start Users Guide Shadow Tracker TM Premier Base TM Advanced Tracking Technologies, Inc. 2003 ATTI All rights reserved Copyright 2003, Advanced Tracking Technologies, Inc. All rights reserved. No
More informationPC Spa Dashboard Control User Guide
EL/GL Series - Mach 3 PC Spa Dashboard Control User Guide 900854 balboa-instruments.com Page 1 Page 2 PC SPA DASHBOARD The PC Spa Dashboard can be used with the EL8000, EL2000, EL1000 and GL systems. System
More informationThank you for purchasing a ZT-1300 printer! The following guide will help you install the equipment and software that goes with your ZT-1300 printer.
Thank you for purchasing a ZT-1300 printer! The following guide will help you install the equipment and software that goes with your ZT-1300 printer. It is strongly recommended that you read through the
More informationRoger D. Secura
Roger D. Secura rsecura@ix.netcom.com HOW TO SETUP AN AD-HOC PEER-TO-PEER NETWORK BETWEEN ONE WINDOWS XP DESKTOP COMPUTER AND ONE WINDOWS 7 LAPTOP COMPUTER USING TWO RALINK USB WIRELESS ADAPTERS NOTE:.
More informationDeviceNet Network Analysis Using the NetDecoder Software Quick Start Guide
DeviceNet Network Analysis Using the NetDecoder Software Quick Start Guide Copyright 2000 2010 Frontline Test Equipment, Inc. All rights reserved. You may not reproduce, transmit, or store on magnetic
More informationUSB Temperature Logger User Guide
PR0455 For Products: - PR0710, PR0711, PR0720, PR0721 Resource Data Management Ltd 80 Johnstone Avenue, Hillington Industrial Estate, Glasgow, Scotland, G52 4NZ, UK +44(0)141 810 2828 Switchboard support@resourcedm.com
More informationMobileCollect Quick Start. Quick Start
1 1 Quick Start Want to quickly get started using MobileCollect? The steps shown below should get you moving in the proper direction. In addition to following these Quick Start procedures, be sure to review
More informationWVL2 Wireless Vehicle Link 2 Installation and Setup Manual
WVL2 Wireless Vehicle Link 2 Installation and Setup Manual Chapter 1: Introducing the Wireless Vehicle Link 2...1 WVL2 Components...2 Component Checklist...3 Product Specifications...4 System Requirements...5
More informationAI3100 Portable Reader User Manual
AI3100 Portable Reader User Manual June 21, 2013 Copyright 2013 Softrail All rights reserved Softrail 1098 Venetia Road Eighty-Four, PA 15330 Tel. 888 872-4612 (toll free US and Canada only) Tel. 724 942-1473
More informationINSTALLING THE PS3 XBOX READY SOFTWARE:
INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software
More informationImages Scientific OWI Robotic Arm Interface Kit (PC serial) Article
Images Scientific OWI Robotic Arm Interface Kit (PC serial) Article Images Company Robotic Arm PC Interface allows real time computer control and an interactive script writer/player for programming and
More informationVersaPrint Operator s Manual
VersaPrint Operator s Manual BadgerWare, LLC PO Box 292 Dayton, OH 45409 877.298.3759 www.badgerware.net Table of Contents Section 1: Introduction... 1 Section 2: VersaPrint Main Window... 4 Section 3:
More informationThis installation guide is intended for customers who are installing NMIS for the first time. Included are the recommended hardware specifications
This installation guide is intended for customers who are installing NMIS for the first time. Included are the recommended hardware specifications and sample screens to guide you through the installation
More informationEmbedded for Xerox EPA-EIP Setup Guide
Embedded for Xerox EPA-EIP Setup Guide 2016 XRX-EPA-EIP-20160315 Equitrac Embedded for Xerox EPA-EIP Setup Guide Document History Date Description of Revision Changes March 15, 2016 Updated for Equitrac
More informationInstallation. 5.) Click Next > when the following is displayed.
1 Installation 1.) Plug the Sign into an AC Outlet to turn on. 2.) Plug-in the USB Flash Drive (provided) to your Computer s USB Slot. (Wait a few second until it load) 3.) Open the USB Flash Drive & double
More informationD G
D7210 0 86085G6000010 Zavio D7210 Quick Installation Guide Please follow the installation steps below to set up your D7210 Dome IP Camera. Check the package contents against the list below. See P.1 Physical
More informationBellatrix Systems, Inc. Maintenance Test Station For Windows XP Version 1.0. User Manual
Bellatrix Systems, Inc. Maintenance Test Station For Windows XP Version 1.0 User Manual Page 1 of 19 Page 2 of 19 GETTING STARTED... 4 CONTACTING TECHNICAL SUPPORT... 4 INSTALLING THE MAINTENANCE TEST
More informationA Guide to Installing OLI Software
A Guide to Installing OLI Software OLI Systems delivers a comprehensive suite of tools designed to help you analyze complex aqueous and multi-solvent electrolyte solution chemistry, thermo-physical properties,
More informationCenturion PLUS CPC4 Download Guide using C4 File Transfer Utility
1010537 2010-03-01 Section 50 Centurion PLUS CPC4 Download Guide using C4 File Transfer Utility 1.0 Background 1.1 The Centurion PLUS Control system consists of a Centurion PLUS Core (CPC4-1) and color
More informationViZion DR + Wireless Install Guide
1 ViZion DR + Wireless Install Guide 1. Open the DR panel box. 2. Put aside the three cables from the top layer of Styrofoam for storage. These cables are only required for potential troubleshooting scenarios.
More informationPROXIMITY Encoding System
PROXIMITY Encoding System ins-206 Date code: 251103 Contents 2 Contents Setting up the system...4 Introduction...4 What s in the box...5 Installing the system...5 Initialising the program...6 Initialising
More information3.5" USB 2.0 to SATA Enclosure
3.5" USB 2.0 to SATA Enclosure Quick Installation Guide Introducing the USB 2.0 3.5" Enclosure The 3.5" USB 2.0 to SATA Enclosure is designed to support USB equipped computers. This enclosure provides
More information1.4 MConfig PC software can be optionally used to upload/download configuration settings to the VRU Pro using RS-485 communication.
FW Murphy VRU Pro Configuration Guide using MConfig v1.60 February 18, 2016 1.0 General Information 1.1 All VRU Pro controllers have firmware that controls the operation of the controller. The latest version
More informationZwCAD Licensing Guide. Contents
Contents Stand-alone license...2 Overview...2 Step 1 - Install ZwCAD 2006...2 Step 2 - Install ZwCAD Dongle...2 Step 3 - Register ZwCAD 2006...3 Updated from ZwCAD 2005...4 Network license...6 Overview:...6
More informationIMPORTANT. Installing your EASE Scan Tool Software
Thank You for purchasing the EASE Diagnostics Scan Tool! Video install instructions to supplement these print instructions are available, if necessary, at www.fixcarsfaster.com. The videos are broken down
More informationQuick Reference Guide
Quick Reference Guide CONTENTS 1 WELCOME... 2 EQUIPMENT... 3 FEATURES/FUNCTIONS... 3 STATUS ACTIVITY LED... 4 SETUP... 5 CHARGING THE POWER PACK... 5 SOFTWARE INSTALLATION... 6 SOFTWARE AUTHORIZATION...
More informationtiptel 545/570 office tiptel 545/570 SD PC Software and Driver Installation in Windows XP/Windows 7 (32/64 Bit)
tiptel 545/570 office tiptel 545/570 SD PC Software and Driver Installation in Windows XP/Windows 7 (32/64 Bit) Installation of PC Software 13.04.2011 Please proceed as follows: 1. After inserting the
More informationUSB 3.0 to HDMI/DVI Dual Display Adapter Installation Guide
USB 3.0 to HDMI/DVI Dual Display Adapter Installation Guide Introduction The USB 3.0 to HDMI/DVI Dual Display Adapter lets you easily and quickly add dual displays to your USB 3.0 enabled system. Key Features
More informationHi-Res 8 Wi-Fi Digital Picture Frame with MP3 player Table of Contents
Hi-Res 8 Wi-Fi Digital Picture Frame with MP3 player Table of Contents Before Using the Digital Picture Frame...3 Introduction...3 Features and Specs...3 Package contents...4 Digital Picture Frame Layout...5
More informationinstallation manual SALES AND ADMINISTRATION (toll free)
installation manual SALES AND ADMINISTRATION 800.637.2645 (toll free) 217.442.0611 sales@timeomatic.com TECHNICAL SUPPORT 866.637.2645 (toll free) service@timeomatic.com www.watchfiresigns.com Quick Start-Up
More informationFirmware, Database, & PC Application Update Installation Instructions
Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described
More informationDownloading & Installing Audacity
Downloading Audacity 1. Open your web browser. 2. Navigate to the following URL: http://audacity.sourceforge.net/download/ 3. The system displays the Download page for Audacity. 4. Select your operating
More informationKD Max V5 Upgrade & Installation Guidance For upgrade users KD Max V5 Upgrade & Installation Guidance
KD Max V5 Upgrade & Installation Guidance 1 / 12 Contents Part 1: Upgrade keylock to KD Max V5.0...3 Part 2: System installation and configuration 6 Part 3: Installing KD Max V5.0. 8 Part 4: Activate your
More informationEnerChip RTC Evaluation Kit CBC34803 Real-Time Clock with Integrated Backup Power. CBC-TAB Registers
System Features and Overview CBC-EVAL-12-34803 is a demonstration kit featuring the Cymbet CBC34803 EnerChip RTC - an integrated surface mount device combining an Ambiq Micro AM0803 Real-Time Clock (RTC),
More informationUSB 3.0 Dual Head Docking Station
Introduction USB 3.0 Dual Head Docking Station Installation Guide The USB 3.0 Dual Head Docking Station is a unique design for a computer that has extra connectivity demands. Features and Benefits Adds
More informationSpecWare 9 Pro and Basic Software Quick Start Guide
SpecWare 9 Pro and Basic Software Quick Start Guide Item # s 3654P9, 3654P9U, 3654P9X, 3654B9, 3654B9U, 3654B9X Contents Installation 3 SpecWare Directory 4 Viewing Data 4 Default Settings 5 Testing the
More informationQUICK REFERENCE GUIDE
QUICK REFERENCE GUIDE CONTENTS Welcome: 2 Equipment: Features/Functions 3 Setup: Charging the Power Pack 5 Software Installation 6 Communications 7 Operation: Introduction 9 Step 1: Setup Instrument 10
More informationidmx-1000 Intelligent DMX512 Converter
Intelligent DMX512 Converter User Manual October 8, 2007 V1.01 Copyright Light O Rama, Inc. 2007, 2008 Table of Contents Introduction... 4 What s in the Box... 4 Important Considerations... 5 Quick Start
More informationOTC 3109 Update Instructions
OTC 3109 Update Instructions Date of Release: December 31, 2012 New Software ID: 9044 Previous Software ID: 4346, 5109 Verify Scan Tool Software Version 1. Connect the Scan Tool to an OBD II vehicle and
More informationWireless Bluetooth USB Dongle User s Guide
Wireless Bluetooth USB Dongle User s Guide 1 Table of Content CHAPTER 1 INTRODUCTION... 5 INTRODUCTION TO BLUETOOTH... 5 INTRODUCTION TO THE WIRELESS BLUETOOTH USB DONGLE... 5 CHAPTER 2 CONTENTS OF PACKAGE...
More informationZoomText 11 USB. Setup Guide
ZoomText 11 USB Setup Guide Copyrights ZoomText Magnifier Copyright 2017, Freedom Scientific, Inc. All Rights Reserved. ZoomText Magnifier/Reader Copyright 2017, Freedom Scientific, Inc. All Rights Reserved.
More informationBeginning PowerPoint XP for Windows
Beginning PowerPoint XP for Windows Tutorial Description This course introduces you to the PowerPoint program basics for creating a simple on-screen presentation. Intended Audience Individuals interested
More informationEZ-TAG2 Manual_Layout 5 11/12/ :14 Page 1 U S E R M A N UAL
EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 1 USER MANUAL EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 2 Contents EZ-TAG2 and Back Plate 1 x Security Torx Key 4 x Screws and raw plugs 1 x Marking out
More informationConnectPort X2 Wireless M Bus Development Kit. Getting Started Guide
ConnectPort X2 Wireless M Bus Development Kit Getting Started Guide 90001223 _B September 9, 2011 2011 Digi International, Inc. All rights reserved. Digi, idigi, Digi International, the Digi and idigi
More informationToolbox: Utilizing the Shared Cart Feature
Toolbox: Utilizing the Shared Cart Feature The shared cart feature offers Deacon Depot users the ability to share one cart among multiple users for easier order creation. To create a shared cart: From
More informationQLabel-IV Operation Manual
P/N. 920-0060611-02 Edition C 07.2009 QLabel-IV Operation Manual QLABEL-Ⅳ... 3 PART I: ABOUT QLABEL-Ⅳ...3 1: INTRODUCTION... 3 2: INSTALLATION... 3 PART II: STARTING ON QLABEL-IV...6 3: START QLABEL-Ⅳ...
More informationSWIFT INSTALLATION QUICK START GUIDE
SWIFT INSTALLATION QUICK START GUIDE 1 STOP. Make sure you have completed a Site Survey which includes a Link Test and RF Scan before continuing. REQUIRED TOOLS AND EQUIPMENT TO CREATE MESH NETWORK CR123A
More informationTelonics Data Converter - USB Device Software and Driver Installation
TELEMETRY-ELECTRONICS CONSULTANTS 932 E. IMPALA AVENUE MESA, ARIZONA 85204-6699 U.S.A. TEL (480) 892-4444 FAX (480) 892-9139 E-MAIL info@telonics.com www.telonics.com Telonics Data Converter - USB Device
More informationPrinter Combo Adapter QUICK START GUIDE VERSION 1.1
Printer Combo Adapter QUICK START GUIDE VERSION 1.1 Bluetooth All rights reserved. All trade names are registered trademarks of respective manufacturers listed. The Bluetoothname and the Bluetoothtrademarks
More informationTEL-218DRV TEL-X-Driver
TEL-218DRV TEL-X-Driver TEL-Atomic, Incorporated P.O. Box 924 Jackson, MI 49204 1-800-622-2866 FAX 1-517-783-3213 email: telatomic@mindspring.com website: www.telatomic.com Features Angular Resolution:
More informationCONTENTS. 1.0 Overview. 2.0 Outline Functionality. 3.0 Minimum system requirements. 4.0 Programme Installation. 5.0 Starting PC DVR Disk Replay Client
PC DVR Disk Replay Client For use with the DMB-X Mobile Series DVRs V1.5 24 nd October 2007 CONTENTS 1.0 Overview 2.0 Outline Functionality 3.0 Minimum system requirements 4.0 Programme Installation 5.0
More informationSmartPick Service Interface Installation, Setup and Event Log Download, Windows 7 & 8
Seite: 1/14 SmartPick Service Interface Installation, Setup and Event Log Download, Windows 7 & 8 1 Introduction 2 2 Flowchart 3 3 Installation 4 3.1 Installing the USB to Serial Adapter 4 3.2 Installing
More informationBasic User Manual Maxwell 2D Student Version. Rick Hoadley Jan 2005
1 Basic User Manual Maxwell 2D Student Version Rick Hoadley Jan 2005 2 Overview Maxwell 2D is a program that can be used to visualize magnetic fields and predict magnetic forces. Magnetic circuits are
More informationDocking Station Operational Description
Docking Station Operational Description August 2018 Copyright 2017, 2018 All Rights Reserved Aures Technologies Changes: Ver 1.0, December 1, 2017, 1 st release Ver 1.1, January 11, 2018, add static IP
More informationInstructions to update Digimax application software (a.k.a. firmware)
Instructions to update Digimax application software (a.k.a. firmware) These instructions are for updating the application software from 1.0.0.0, V1.0.1.0, V1.0.2.0, 1.0.3.0 (07093001), & 1.0.3.0 (07110801),
More information8-Port USB to RS-232 Serial Adapter Hub Quick Installation Guide
8-Port USB to RS-232 Serial Adapter Hub Quick Installation Guide Introduction The 8-Port USB to RS-232 Serial Adapter Hub adds eight 9-pin serial ports to your USB-equipped system. Key Features and Benefits
More informationUG MCAP II & ecap II Smartware & USB Drivers Installation
MCAP II & ecap II Smartware & USB Drivers Installation Sept 4, 2008 Copyright 2008 by QEI Inc. ALL RIGHTS RESERVED NOTICE The information in this document has been carefully checked and is believed to
More informationitrax PC Replacement Quick Start Guide P/N Pre-Software Installation
Quick Start Guide P/N 60789-0 Use this procedure to upload the current software onto a new itrax PC. To access the newest software, contact ICS Technical Support at ics.tech.support@nordson.com. Follow
More informationCompuLEAD: Installing LeadLINK Plus!
CompuLEAD: Installing LeadLINK Plus! LEADlink Plus! Sales Lead Management Software, by CompuSystems, is a new, innovative and creative way of capturing sales leads through a CompuLEAD data recorder into
More informationHow to Install Temprecord for Windows Software V5.07 for USB Reader
Temprecord International Ltd PO Box 58-430 Greenmount Auckland, New Zealand Phone +64 9 274 9825 Fax +64 9 273 4020 www.temprecord.com How to Install Temprecord for Windows Software V5.07 for USB Reader
More informationBCOM-USB Device. User Manual.
BCOM-USB Device User Manual www.kalkitech.com Version 2.1.2, December 2017 Copyright Notice 2017 Applied Systems Engineering, Inc. All Rights reserved. This user manual is a publication of Applied Systems
More informationPC SETUP GUIDE Windows 7 + MicroSale
PC SETUP GUIDE Windows 7 + MicroSale TABLE OF CONTENTS Windows 7 Setup guide... 3 Configuring the default administrator account... 3 Configuring additional accounts... 3 Dealer Account... 3 End User Account...
More informationDigital Ink Pad+ User Manual
Digital Ink Pad+ User Manual Page 1 Welcome. Dear user, thank you for purchasing this product. Much investment in time and effort has gone into its development, and it is our hope that it will give you
More informationTalk Light Time Manager User Instructions
Talk Light Time Manager User Instructions Talk Light Time Manager Installation and User Instructions Technical Requirements: Windows 95, Windows 98, NT, ME, Windows 2000 or XP. Hard drive space for the
More informationFirmware, Database, & PC Application Update Installation Instructions
Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described
More informationELEC451 Integrated Circuit Engineering Using Cadence's Virtuoso Layout Editing Tool
ELEC451 Integrated Circuit Engineering Using Cadence's Virtuoso Layout Editing Tool Contents Contents 1. General 2. Creating and Working On a Layout o 2.1 Undoing/Re-doing an Action o 2.2 Display Options
More informationN2KExtractor. NMEA 2000 Data Extractor Software. User s Manual
N2KExtractor NMEA 2000 Data Extractor Software User s Manual Revision 1.0.0 Copyright 2012 Maretron, LLP All Rights Reserved Maretron, LLP 9014 N. 23 rd Ave #10 Phoenix, AZ 85021-7850 http://www.maretron.com
More informationSMM501/501-H (Surveillance Mode Module) Ford Police Interceptors (Sedan and SUV)
An ISO 9001:2008 Registered Company SMM501/501-H (Surveillance Mode Module) 2013-2014 Ford Police Interceptors (Sedan and SUV) Introduction The SMM501/501-H is intended for 2013 and 2014 Ford Police Interceptors
More informationUPDATING THE SYSTEM MANAGER SD Updating the System Manager with Prism 2
Updating the System Manager with Prism 2 Updating the System Manager SD with Prism 2 Version 4.5.0 and higher 7. Click on the icon. The Job-Sites Window will appear. In the Type of CommLink
More informationPhotoPDF User Guide. PhotoPDF. Photo to PDF Converter
PhotoPDF Photo to PDF Converter PhotoPDF is a batch-processing tool to convert photos into PDF file. PhotoPDF provides three modes of conversion: Batch Convert, Photos Merge and Thumbnail Page. PhotoPDF
More information1. Remove any previously installed versions of the Offline Image Viewer by dragging and dropping the Offline Image Viewer icon into the Trash.
Installing OIV 2.6 for Macs 1. Remove any previously installed versions of the Offline Image Viewer by dragging and dropping the Offline Image Viewer icon into the Trash. 2. Download the new version of
More information