User Guide. Getting Started with OmniPlex Demonstration Software. Plexon Inc 6500 Greenville Avenue, Suite 700 Dallas, Texas USA

Transcription

1 User Guide Software Version 1, April 2017 Getting Started with OmniPlex Demonstration Software Plexon Inc 6500 Greenville Avenue, Suite 700 Dallas, Texas USA

2 Getting Started with OmniPlex Demonstration Software Document Number: OPDMN0001a Software Version: 1 Date: April 2017 Copyright Plexon Inc, All Rights Reserved Plexon Inc Proprietary The information contained herein is the property of Plexon Inc and it is proprietary and restricted solely to assist Plexon Inc customers. Neither this document nor the contents may be disclosed, copied, revealed or used in whole or in part for any other purpose without the prior written permission of Plexon Inc. This document must be returned upon request of Plexon Inc. Information is subject to change without notice. Plexon Inc reserves the right to make changes in equipment design or components as progress in engineering or manufacturing may warrant. PLEXON, Plexon, the five-line symbol, CereStage, CineCorder, CineLAB, CineLyzer, CinePartner, CinePlex, CineTracker, CineTyper, DigiAmp, MiniDigi, Offline Sorter, OmniPlex, PL2, PlexBright, PlexDrive, PlexSort,PlexStim, Plextrode, Radiant, RapidGrid, TrackSort and the Plexon logo are trademarks of Plexon Inc, Dallas, Texas, USA. Other product and company names mentioned are trademarks of their respective owners.

3 Plexon Inc Publication History iii April 2017 This is the first issue of the document. It is based on Version 1.16 of the OmniPlex Demonstration software. Getting Started with OmniPlex Demonstration Software

4 Plexon Inc Contents iv Publication History iii Introduction 1 Installing the OmniPlex Demo Software 1 Running the OmniPlex Demo after Installation 13 Finding Information and Procedures in the User Guide 17 Keeping Up to Date with the Latest OmniPlex System Features 19 Getting Started with OmniPlex Demonstration Software

5 1 Introduction This document explains how to install and operate the Plexon OmniPlex Demonstration (OmniPlex Demo) software. 2 Installing the OmniPlex Demo Software The OmniPlex Demo software allows you to view and explore most of the features of the OmniPlex System, including filtering, spike detection, and spike sorting. It simulates acquisition of data from OmniPlex hardware by playing back a demo file of sample data. For additional information on the OmniPlex System, please contact a Plexon sales representative at sales@plexon.com or Operating System The OmniPlex Demo software runs on Windows 7 computers. In most cases, it can also run on Windows 10 computers. If you experience any difficulties installing or running the software, please contact Plexon Support at or support@plexon.com. Installed Items The installation process will install the following items on the PC: OmniPlex Demo executables, data files, and User Guide Microsoft Visual C redistributable items SafeNet Sentinel security key drivers Procedure 1 Download the OmniPlex Demo software (OmniPlexDemoV1Setup.zip) from the Plexon website, (select Support > Software Downloads > OmniPlex). This download may take several minutes. Version 1 1

6 When the download is completed, click the Open button to open the zip file. The system should display the list of files shown in the image below. 2 In the Files menu, select Extract All... Note: If a Windows Security or User Account Control dialog is displayed, click Yes to continue opening and extracting from the zip file. 2 Getting Started with OmniPlex Demonstration Software

7 3 In the Extract Compressed (Zipped) Folders dialog, Browse to the desktop and create an new folder named OmniPlexDemoV1Setup on the desktop. Then click OK and then Extract. User User User 4 Exit all currently running applications. Version 1 3

8 5 In the "OmniPlexDemoV1Setup" desktop folder, double click on OmniPlexDemoV1Setup.exe. Note: If a Windows Security or User Account Control dialog is displayed, click Yes to continue opening the setup application file. 6 When the Welcome dialog is displayed, click Next. 7 Follow the prompts on the setup dialogs by doing the following (see the images below): "End User License Agreement (EULA) window click "Agree" "Choose Destination Location" window click "Next" "Backup Replaced Files" window click "Next" "Select Program Manager Group" window click "Next" "Start Installation" window click "Next" (On some systems) If the "Microsoft Visual C Redistributable (x86)" window appears click "Yes" 4 Getting Started with OmniPlex Demonstration Software

9 Version 1 5

10 The Installing dialog appears. 6 Getting Started with OmniPlex Demonstration Software

11 8 Depending on whether the Microsoft Visual C redistributable files are already present on your system, proceed through one of the following two series of steps. 9 If the Microsoft Visual C redistributables ARE NOT INSTALLED, follow these steps: "Microsoft Visual C Redistributable (x86)" window click the "I agree" box "Microsoft Visual C Redistributable (x86)" window click "Install" "Microsoft Visual C Redistributable (x86)" "Setup Successful" window click "Close" Version 1 7

12 10 If the Microsoft Visual C redistributables ARE ALREADY INSTALLED, follow these steps: "Microsoft Visual C Redistributable (x86)" "Modify Setup" window click "Repair" "Microsoft Visual C Redistributable (x86)" "Setup Successful" window click "Close" 8 Getting Started with OmniPlex Demonstration Software

13 11 After closing the Microsoft Visual C++ Redistributables window, the Sentinel System Driver installer Welcome window appears. Click Next. 12 Depending on whether the Sentinel System Driver files are already present on your system, proceed through one of the following two series of steps: 13 If the Sentinel System Drivers ARE NOT INSTALLED, follow these steps: "Sentinel" "License" window Click the "I accept" radio button, then click "Next" "Sentinel" "Setup Type" window click "Complete" radio button, then click "Next" "Sentinel" "Ready" window click "Install" "Sentinel" "InstallShield Wizard Completed" window click "Finish" Version 1 9

14 14 If the Sentinel System Drivers ARE ALREADY INSTALLED, follow these steps: "Sentinel" "Program Maintenance" window Click the "Repair" button, then click "Next" "Sentinel" "Ready to Repair" window click "Install" "Sentinel" "InstallShield Wizard Completed" window click "Finish" 10 Getting Started with OmniPlex Demonstration Software

15 15 The Installation Complete dialog appears. Click Finish. 16 If a window appears requesting permission to restart Windows, click Yes and wait for Windows to restart. If it does not appear, restart your computer. 17 If desired, you can delete the OmniPlexDemoV1Setup folder from your desktop. Version 1 11

16 Installed Files The setup program has installed the following files on the hard drive: C:\PlexonData\wideband.ddt 16 channels of spike data riding on a 5 Hz sine wave meant to represent field potential signals C:\PlexonData\demo16.pxc configuration file for PlexControl, containing sorted unit definitions C:\PlexonData\demo16.pxs configuration file for OmniPlexServer C:\Program Files (x86)\plexon Inc\OmniPlex\OmniPlexServer.exe and a shortcut icon on the desktop C:\Program Files (x86)\plexon Inc\OmniPlex\PlexControl.exe and a shortcut icon on the desktop C:\Program Files (x86)\plexon Inc\OmniPlex\ DLL files needed for OmniPlex Demo operation C:\Program Files (x86)\plexon Inc\OmniPlex\DeviceClients\ DLL files needed for OmniPlex Demo operation C:\Program Files (x86)\plexon Inc\OmniPlex\Manual\OmniPlex User Guide V1.pdf and a shortcut icon on the desktop 12 Getting Started with OmniPlex Demonstration Software

17 3 Running the OmniPlex Demo after Installation 1 From the Windows desktop, run OmniPlexServer.exe by double-clicking the OmniPlex Server shortcut: 2 A dialog will appear. Click OK. The Server window opens. 3 From the Server File menu, select Open. Version 1 13

18 4 Navigate to the folder C:\PlexonData. 5 Select and open the file "demo16.pxs." The Server window displays the Demo configuration. 14 Getting Started with OmniPlex Demonstration Software

19 6 Run PlexControl.exe by double-clicking its shortcut on the desktop. The PlexControl window opens. 7 Perform the following steps in PlexControl to load a configuration file which has sorted units defined for the Demo data: 7a From the File menu, select Open. 7b 7c 7d Navigate to the folder C:\PlexonData. Select and open the file "demo16.pxc." From the Data menu, select Start Data. Version 1 15

20 The PlexControl window displays the data from the demo16.pxc file. 8 To start using the OmniPlex Demo with no sorted units, i.e. "from scratch," perform the following steps in PlexControl: 8a From the Data menu, select Start Data. 8b 8c From the Configure menu, select Auto Configure Sources. Wait for the Auto Configure progress window to finish. 9 You can now perform procedures in PlexControl using the data that you loaded in Step 7 or Step 8. If you have questions about your OmniPlex Demo installation or operation, please contact Plexon support at or support@plexon.com. In the OmniPlex Demo, sample neural data is played back from the file wideband.ddt by a software emulator (TestADC) which takes the place of the OmniPlex Digital Headstage Processor (DHP) or DigiAmp data acquisition hardware. You can extract and sort spikes from the demo data file and try out many of the other features, displays, and techniques of the OmniPlex System. 16 Getting Started with OmniPlex Demonstration Software

21 See the User Guide for Procedures and More Information For detailed information about the features of PlexControl and their use, doubleclick on the desktop shortcut for the OmniPlex User Guide and refer to Chapter 4, "PlexControl User Interface." 4 Finding Information and Procedures in the User Guide The previous sections covered the installation and operation of the OmniPlex Demo software, which allows you to explore many of the key features that are available with the full system. This section points to information in the OmniPlex User Guide that you can use to better understand the workings of the full OmniPlex System and how you can configure the system to meet the needs of your specific experiments. The full OmniPlex System hardware and software can be purchased through your Plexon sales representative. Note: Chapter numbers and titles might change as the User Guide is updated periodically. The list below is based on Version 1.15 of the User Guide. Chapter 1: Overview and System Components OmniPlex chassis DigiAmp and MiniDigi Digitizing Amplifiers Digital Headstage Processor (DHP) unit Components displayed in the OmniPlex Server window Chapter 2: Startup (with DigiAmp Subsystem) The DigiAmp Amplifier is used with analog headstages Procedure for system startup Managing the wideband gain and signal display Spike signals (high frequency) and field potentials (low frequency) Chapter 3: Startup (with DHP Subsystem) The Digital Headstage Processor (DHP) is used with digital headstages Procedure for system startup Spike signals (high frequency) and field potentials (low frequency) Version 1 17

22 Chapter 4: PlexControl User Interface Managing and optimizing the display for your experiments Using the toolbars and menu options Chapter 5: Spike Detection Setting spike detection thresholds Working with snapshots Extracting spike waveforms Chapter 6: Basic Spike Sorting Template sorting Working with units and channels Chapter 7: Recording Selecting sources and channels to be recorded PLX and PL2 file formats Chapter: 8: Additional Sorting Methods Line sorting Principal Components Analysis (PCA) Polygon Sorting Chapter: 9: Digital Input, Triggered Recording and Auxiliary Analog Input Digital Input card Timed and event-triggered file recording Multiple file recording Keyboard events Auxiliary analog input Chapter 10: Additional User Interface Views and Features PlexControl activity and spike display modes Spectral view and histogram 3D view Channel ranking PlexControl keyboard shortcuts Chapter 11: Saving Settings, Startup/Shutdown and Troubleshooting Saving and loading PlexControl settings PXS and PXC files System troubleshooting and resets 18 Getting Started with OmniPlex Demonstration Software

23 Chapter 12: Additional Features Digital referencing Channel mapping Thresholding configuration options Measuring electrode impedance Appendices Appendix A: Signal Amplitudes and Gain Appendix B: Separation of Spikes and Field Potentials Using Digital Filters Appendix C: DigiAmp Device Settings Filtering, Referencing and Latency Appendix D: DHP Device Settings Filtering, Referencing and Latency Appendix E: Lowest Latency Operation Appendix F: Disabling Unused Boards to Reduce Channel Counts Appendix G: Robust Statistics Appendix H: Selectable 2D/3D Feature Space and Enhanced PCA Appendix I: Option for Two Digital Input Cards Appendix J: Hardware Pinouts and Connections Appendix K: Firmware Upgrade for DHP Unit 5 Keeping Up to Date with the Latest OmniPlex System Features The OmniPlex User Guide is periodically updated and reissued, typically in conjunction with a new software release. The latest version of the User Guide is available on the Plexon website, You can see a summary of changes that have been implemented in the software by accessing the Change Log for this product on the Plexon website. For additional details about the new features for each release, see the OmniPlex Release Notes document, which the software installer places on the hard drive during installation of the full software package. Version 1 19

24 Getting Started with OmniPlex Demonstration Software Plexon Inc 6500 Greenville Avenue Suite 700 Dallas, Texas Telephone: +1 (214) Fax: +1 (214) Copyright Plexon Inc, All Rights Reserved Plexon Inc Proprietary Document number: OPDMN0001a Software Version: 1 Date: April 2017