Tint Tek 20/20 Cloud Software Installation Guide

Transcription

1 Tint Tek 20/20 Cloud Software Installation Guide Page 1 of 9

2 Software Installation In your inbox, you will have received an from us (it may show up in your junk mail). (Figure 1) This contains both your Activation Code and your Username that you will need to download your software. This is a single computer software, so be sure you are downloading onto the computer it will be used with. Figure 1 The software can be used on the Windows Operating Systems for Vista, 7, 8 & 8.1. The next steps will guide you through the installation process! 1. Go to 2. The webpage will now ask you for your activation code. You may just copy and paste right from the . (Figure 2) Figure 2 Select Activate to continue Page 2 of 9

3 Once the activation code has been provided, it will start the process of creating an account. 3. Where it says Create A Free SAI Cloud Account, select I am new to the SAi Cloud. Provide your where it asks for one. (Figure 3) Important: The address you select for this Sai Cloud account will be the owner of the software. It will be used for all Sai software services. It is recommended you use a permanent business address. Figure 3 4. Check your . It will go to the address that you provided as your SAi Cloud account . (Figure 4) Figure 4 5. A link will be provided in your mail. Copy and Paste this link in your browser. (Figure 5) Figure 5 Page 3 of 9

4 6. When the link loads, it will take you to a site for you to create your account. (Figure 6) Any field with an asterisk (*) beside it must be filled out. Again, this information will be for the owner of the account. When you are finished filling out the form, select Create Account to continue. 7. Terms and Conditions will appear. Read carefully and select I accept the terms and conditions to continue. (Figure 7) Figure 6 Figure 7 8. After accepting the Terms and Conditions, your account will be ready to be activated. Select Activate Now to continue. (Figure 8) Figure 8 Page 4 of 9

5 9. Getting Started will appear next. Follow Step 1 and select Download Now. (Figure 9) 10. A pop up will ask you to Run, Save, or Cancel. Press the arrow beside the Save option and select Save As. (Figure 10) Figure 9 Figure Once in Save As, be sure that your file is being saved to Downloads. Press Save to begin the process. (Figure 11) 12. Press Run when prompted. (Figure 12) Figure 12 Figure 11 A number of pop ups will appear as it goes through the downloading process. Initializing (Figure 13) Figure 13 Downloading (Figure 14) Figure 14 Checking Download (Figure 15) Figure 15 Page 5 of 9

6 Extracting Installer (Figure 16) Figure 16 Start Install Select Yes to continue. (Figure 17) Figure 17 Download complete you Do Not have to select Exit. The next step will appear automatically. (Figure 18) Figure User Account Control will pop up asking you if you want to allow the program to make changes to this computer select Yes to continue. (Figure 19) Figure When Choose Setup Language appears, leave it set to English press OK to continue. (Figure 20) Figure 20 InstallShield Wizard will appear next. Once it finishes its progress, it will automatically disappear. (Figure 21) Figure 21 Page 6 of 9

7 15. InstallShield Wizard will guide you through the next process. Select Next to continue. (Figure 22) Figure Read the License Agreement and select I accept the terms of the license agreement and Next to continue. (Figure 23) Figure Choose Destination Location will appear you do not have to change the location. Select Next to continue. (Figure 24) Figure When Select Features appears, all 3 options must be highlighted. You may have to select the option for SafeNet Sentinel System Driver Select Next to continue. (Figure 25) Figure Select Program Folder it will already create a folder name. Do not change anything press Next to continue. (Figure 26) Figure 26 Page 7 of 9

8 Tint Tek 20/20 Cloud will now start the setup. The bar will show the status of the setup. (Figure 27) 20. Three quarters through the setup, there will be a popup prompting you to remove a USB dongle. You do not need to remove anything. Select OK to continue. (Figure 28) Figure 27 Figure Once the setup is complete, you will be prompted to provide your activation code again. Enter your code and select Next to continue. (Figure 29) Figure 29 Communicating - the license is connecting with the SAi Cloud. (Figure 30) Figure Licensing Successful the software download is now complete. Select Finish. (Figure 31) Figure InstallShield Wizard will also have a pop up when it is complete. Select Finish to complete the process. (Figure 32) Figure 32 Page 8 of 9

9 On your desktop, you will have 2 new icons: Tint Tek 2020 Cloud (Figure 33) and Figure 33 Production Manager (Figure 34) Figure Open Tint Tek 20/20 Cloud. It will ask you for your Username that was provided to you in the first (vtt****). Your software will now be active and ready to use! (Figure 35) Figure 35 Page 9 of 9