Workflow for Control System Design and Implementation
|
|
- Lora Jenkins
- 6 years ago
- Views:
Transcription
1 Workflow for Control System Design and Implementation - Dhirendra Singh, Application Engineer - Shobhit Shanker, Application Engineer 2012 The MathWorks, Inc. 1
2 Agenda Industry Trends and Challenges Design PID Controller & Feedback Compensator Adding Control logic Implementing control algorithm 2
3 Challenge- Increasing Software Content Lights Engine Control Power Management Adaptive Front Lighting Systems Traction Control Voice Recognition Instrumentation Driver Drowsiness Stability Controls ABS Steering Adaptive Cruise Control Climate Controls Infotainment Windows Navigation Airbags Software content increasing 3x Doors 5x per year How Transmission to develop and manage Crash such large Control amount of software? Avoidance Wireless Connectivity Passenger Detection Obstacle Detection Ride Control Tire Pressure Monitoring 3
4 Growth of Automotive Electronics and Software Modeling Hybrids x-ev s Driver-less C Microcode/Assembly BCM HVAC AFS Abstraction HUD Motorola bit/ 1 MHz / 4 kbytes ABS ESC ACC Freescale MPC5674F LDWS 32 bit / 200+ MHz / 4000 kbytes PCS Processor Ignition Fuel Injection ETC GDI DCT HCCI
5 Model-Based Design- Controller Design RESEARCH REQUIREMENTS DESIGN Environmental Models C, C++ Mechanical Control Algorithms Supervisory Logic Electrical IMPLEMENTATION VHDL, Verilog Structured Text TEST & VERIFICATION MCU DSP FPGA ASIC PLC INTEGRATION 5
6 What is Our End Goal? Code Generation Real-Time or Embedded Embedded Processor or ECU 6
7 Problem Formulation Higher Performance: 1. Faster trajectory Vmax: rad/s Amax: rad/s 2 2. Decreased error at standstill error < 1 rad 7
8 Agenda Industry Trends and Challenges Design PID Controller & Feedback Compensator Adding Control logic Implementing control algorithm 8
9 Control Design: solving your design problem Tuning a PID controller Specifying the controller structure in Simulink Setting up your design environment Analyzing and tuning the closed loop Discretizing controller Optimizing design parameters Designing fault detection logic Demo 9
10 PID Controller Block with Automatic Tuning 10
11 Agenda Design PID Controller & Feedback Compensator Adding Control logic Implementing control algorithm 11
12 Designing Fault Detection Logic 12
13 Model-Based Design- Implementation RESEARCH REQUIREMENTS DESIGN Environmental Models C, C++ Mechanical Control Algorithms Supervisory Logic Electrical IMPLEMENTATION VHDL, Verilog Structured Text TEST & VERIFICATION MCU DSP FPGA ASIC PLC INTEGRATION 13
14 Agenda Design PID Controller & Feedback Compensator Adding Control logic Implementing control algorithm 14
15 Workflow for Control System Design - Implementation Shobhit Shanker Senior Application Engineer- Code Generation and Verification 2012 The MathWorks, Inc. 15
16 Implement Model as Software On-target Code Generation Real-Time or Embedded Embedded Processor or ECU 16
17 Demo Code Generation 17
18 How Did We Get Here? 18
19 Workflow For Embedded Code Generation Setting up-code Generation Environment Modeling Guidelines Checking Code Generation Advisor Settings e.g. RAM/ROM Add Software Design Details Algorithm Partitioning e.g. reusable libraries, Model reference Data Typing, Scoping of Variables, Fixed Point Details, Sw-DD Generate Code & Review Peer review, Code Walkthrough Standards Compliance e.g. MISRA-AC-AGC Verification and Integration of Code Software-in-loop testing(sil) Processor-in-Loop(PIL) for Target Testing Platform Integration 19
20 Setting up Code-Generation Environment V Discretizing the model Variable Fixed-Step Code Advisor Float-Fixed point conversion Modeling guidelines checking MAAB, DO178B/C, ISO
21 Add Software Design Details Naming of Variable Storage class(scope) Datatype Comments Algorithm Partitioning Functions Reusable Functions Inline #Pragmas 21
22 Generate Code and Review Traceability Static Code Metrics RAM Call Tree SLOC Comments 22
23 Continuous Test and Verification (SIL/PIL) Executable Specifications Design with Simulation Models Continuous Test and Verification Automatic Code Generation 2012 The MathWorks, Inc. 23
24 Model Testing Develop test inputs Types of inputs: Functional requirement High level use case Sensitivity analysis Edge Case testing Robustness testing etc Apply the test inputs to model Analyze the results Expected output Measure coverage 24
25 Log Signals of Interest Identify numerical differences Supports: Normal, SIL, PIL Logged signals Imported signals HTML reports 25
26 Software-in-the-Loop (SIL) Testing: Verify Production Controller with Software-in-the-loop Execution Host/Host Nonreal-time Code Generation Compiled C Code S-Function (Windows DLL) 26
27 Processor-in-the-Loop (PIL) Testing: Verify Production Controller with Processor-in-the-loop Execution Host/Target Nonreal-time Code Generation Production Processor 27
28 BLACK BOX P O W E R V R C S I N P U T B L U E G R E E N R E D Platform Integration Controller Model Communication Interfaces Comm Drivers Generated Algorithm Code Output Drivers M Actuators Sensors A B C Input Drivers Optional Target Optimized Code Special Device Drivers Tuning RGBSplit-4 Special Interfaces Scheduler/Operating System and Support Utilities 28
29 Summary Design, Tune and Test Controllers in Simulink Convert Controller Models to Embedded Code Test Generated Code on Target 29
30 What s Next? Explore >>rtwdemos Attend Embedded Code Generation class Request Advisory Services: Developing Embedded Targets, Model-Based Design for ISO or DO Read Technical Articles and User Examples Thank You! 30
What's new in MATLAB and Simulink for Model-Based Design
What's new in MATLAB and Simulink for Model-Based Design Magnus Jung Application Engineer 2016 The MathWorks, Inc. 1 What s New? 2 Model-Based Design Workflow RESEARCH REQUIREMENTS DESIGN Scheduling Event
More informationAutomating Best Practices to Improve Design Quality
Automating Best Practices to Improve Design Quality Adam Whitmill, Senior Application Engineer 2015 The MathWorks, Inc. 1 Growing Complexity of Embedded Systems Emergency Braking Body Control Module Voice
More informationVerification and Validation of High-Integrity Systems
Verification and Validation of High-Integrity Systems Chethan CU, MathWorks Vaishnavi HR, MathWorks 2015 The MathWorks, Inc. 1 Growing Complexity of Embedded Systems Emergency Braking Body Control Module
More informationFrom Design to Production
From Design to Production An integrated approach Paolo Fabbri Senior Engineer 2014 The MathWorks, Inc. 1 Do you know what it is? Requirements System Test Functional Spec Integration Test Detailed Design
More informationMATLAB/Simulink in der Mechatronik So einfach geht s!
MATLAB/Simulink in der Mechatronik So einfach geht s! Executable s with Simulation Models Continuous Test and Verification Automatic Generation Tobias Kuschmider Applikationsingenieur 2014 The MathWorks,
More informationImplementation and Verification Daniel MARTINS Application Engineer MathWorks
Implementation and Verification Daniel MARTINS Application Engineer MathWorks Daniel.Martins@mathworks.fr 2014 The MathWorks, Inc. 1 Agenda Benefits of Model-Based Design Verification at Model level Code
More informationVerification and Test with Model-Based Design
Verification and Test with Model-Based Design Flight Software Workshop 2015 Jay Abraham 2015 The MathWorks, Inc. 1 The software development process Develop, iterate and specify requirements Create high
More informationDesigning and Analysing Power Electronics Systems Using Simscape and SimPowerSystems
Designing and Analysing Power Electronics Systems Using Simscape and SimPowerSystems Gernot Schraberger Industry Manager, Europe Industrial Automation & Machinery, Energy Production MathWorks 2012 The
More informationAutomatización de Métodos y Procesos para Mejorar la Calidad del Diseño
Automatización de Métodos y Procesos para Mejorar la Calidad del Diseño Luis López 2015 The MathWorks, Inc. 1 Growing Complexity of Embedded Systems Emergency Braking Body Control Module Voice Recognition
More informationProduction Code Generation Introduction and New Technologies
Production Code Generation Introduction and New Technologies Tom Erkkinen Embedded Applications Manager The MathWorks, Inc. 2007 The MathWorks, Inc. Agenda Historical Review Code Generation 1999 (Release
More informationDeveloping AUTOSAR Compliant Embedded Software Senior Application Engineer Sang-Ho Yoon
Developing AUTOSAR Compliant Embedded Software Senior Application Engineer Sang-Ho Yoon 2015 The MathWorks, Inc. 1 Agenda AUTOSAR Compliant Code Generation AUTOSAR Workflows Starting from Software Component
More informationWhat s New in Simulink in R2015b and R2016a
What s New in Simulink in R2015b and R2016a Ruth-Anne Marchant Application Engineer 2016 The MathWorks, Inc. 1 2 Summary of Major New Capabilities for Model-Based Design RESEARCH REQUIREMENTS DESIGN Modelling
More informationModel to Code, Made Simple and Easy Sebastien Dupertuis Application Engineer Applications Engineering Group MathWorks Switzerland June 11, 2015
Model to Code, Made Simple and Easy Sebastien Dupertuis Application Engineer Applications Engineering Group MathWorks Switzerland June 11, 2015 2015 The MathWorks, Inc. 1 Challenges to bring an idea into
More informationModel-Based Design: Generating Embedded Code for Prototyping or Production
Model-Based Design: Generating Embedded Code for Prototyping or Production Ruth-Anne Marchant Application Engineer MathWorks 2016 The MathWorks, Inc. 1 2 ABB Accelerates Application Control Software Development
More informationMATLAB/Simulink 기반의프로그래머블 SoC 설계및검증
MATLAB/Simulink 기반의프로그래머블 SoC 설계및검증 이웅재부장 Application Engineering Group 2014 The MathWorks, Inc. 1 Agenda Introduction ZYNQ Design Process Model-Based Design Workflow Prototyping and Verification Processor
More informationHardware-Software Co-Design and Prototyping on SoC FPGAs Puneet Kumar Prateek Sikka Application Engineering Team
Hardware-Software Co-Design and Prototyping on SoC FPGAs Puneet Kumar Prateek Sikka Application Engineering Team 2015 The MathWorks, Inc. 1 Agenda Integrated Hardware / Software Top down Workflow for SoC
More informationIntegrated Workflow to Implement Embedded Software and FPGA Designs on the Xilinx Zynq Platform Puneet Kumar Senior Team Lead - SPC
Integrated Workflow to Implement Embedded Software and FPGA Designs on the Xilinx Zynq Platform Puneet Kumar Senior Team Lead - SPC 2012 The MathWorks, Inc. 1 Agenda Integrated Hardware / Software Top
More informationCodegenerierung für Embedded Systeme leicht gemacht So geht s!
Codegenerierung für Embedded Systeme leicht gemacht So geht s! Tobias Kuschmider MathWorks München, 9.07.2014 2014 The MathWorks, Inc. 1 Agenda Model-Based Design An Introduction Use of Production Code
More informationReducing Design Errors in Complex State Machines using Model-Based Design
Reducing Design Errors in Complex State Machines using Model-Based Design s s s Fredrik Håbring Senior Application Engineer Embedded Control Systems 0 The MathWorks, Inc. Finding Errors Late in Project
More informationVerification, Validation, and Test with Model-Based Design
2008-01-2709 Verification, Validation, and Test with Model-Based Design Copyright 2008 The MathWorks, Inc Tom Erkkinen The MathWorks, Inc. Mirko Conrad The MathWorks, Inc. ABSTRACT Model-Based Design with
More informationAutomating Best Practices to Improve Design Quality
Automating Best Practices to Improve Design Quality 임베디드 SW 개발에서의품질확보방안 이제훈차장 2015 The MathWorks, Inc. 1 Key Takeaways Author, manage requirements in Simulink Early verification to find defects sooner
More informationModel-Based Design for Safety-Critical and Mission-Critical Applications Bill Potter Technical Marketing April 17, 2008
Model-Based Design for Safety-Critical and Mission-Critical Applications Bill Potter Technical Marketing April 17, 2008 2008 The MathWorks, Inc. Safety-Critical Model-Based Design Workflow Validate Trace:
More informationMATLAB Expo Simulation Based Automotive Communication Design using MATLAB- SimEvent. Sudhakaran M Anand H General Motors
MATLAB Expo 2013 Simulation Based Automotive Communication Design using MATLAB- SimEvent Sudhakaran M Anand H General Motors 1 Agenda Introduction Different Analysis Methods Analytical vs. Simulation Approach
More informationOptimization and Implementation of Embedded Signal Processing Algorithms Jonas Rutström Senior Application Engineer
Optimization and Implementation of Embedded Signal Processing Algorithms Jonas Rutström Senior Application Engineer 2016 The MathWorks, 1 Inc. Two important questions in embedded design... 1. What s your
More informationModel-Based Design: Design with Simulation in Simulink
Model-Based Design: Design with Simulation in Simulink Ruth-Anne Marchant Application Engineer MathWorks 2016 The MathWorks, Inc. 1 2 Outline Model-Based Design Overview Modelling and Design in Simulink
More information2015 The MathWorks, Inc. 1
2015 The MathWorks, Inc. 1 웨어러블디바이스의신호분석 Senior Application Engineer 김종남 2015 The MathWorks, Inc. 2 Agenda Internet Of Things Signal Analytics and Classification : On data from wareable and mobile device
More informationIntroduction to Control Systems Design
Experiment One Introduction to Control Systems Design Control Systems Laboratory Dr. Zaer Abo Hammour Dr. Zaer Abo Hammour Control Systems Laboratory 1.1 Control System Design The design of control systems
More information2015 The MathWorks, Inc. 1
2015 The MathWorks, Inc. 1 신호처리응용을위한 Model Based Design Workflow 이웅재부장 2015 The MathWorks, Inc. 2 CASE: Software in Signal Processing Application (Medical) Medical devices are increasingly driven by complex
More informationSimulation-based Test Management and Automation Sang-Ho Yoon Senior Application Engineer
1 Simulation-based Test Management and Automation Sang-Ho Yoon Senior Application Engineer 2016 The MathWorks, Inc. 2 Today s Agenda Verification Activities in MBD Simulation-Based Test Manage and Automate
More informationIntroducing Simulink Release 2012b for Control System Development Mark Walker MathWorks
Introducing Simulink Release 2012b for Control System Development Mark Walker MathWorks 2012 The MathWorks, Inc. 1 Simulink R2012b the most significant upgrade to Simulink ever Who does Simulink R2012b
More informationModel-Based Design for effective HW/SW Co-Design Alexander Schreiber Senior Application Engineer MathWorks, Germany
Model-Based Design for effective HW/SW Co-Design Alexander Schreiber Senior Application Engineer MathWorks, Germany 2013 The MathWorks, Inc. 1 Agenda Model-Based Design of embedded Systems Software Implementation
More informationA Model-Based Reference Workflow for the Development of Safety-Related Software
A Model-Based Reference Workflow for the Development of Safety-Related Software 2010-01-2338 Published 10/19/2010 Michael Beine dspace GmbH Dirk Fleischer dspace Inc. Copyright 2010 SAE International ABSTRACT
More informationDRYING CONTROL LOGIC DEVELOPMENT USING MODEL BASED DESIGN
DRYING CONTROL LOGIC DEVELOPMENT USING MODEL BASED DESIGN Problem Definition To generate and deploy automatic code for Drying Control Logics compatible with new SW architecture in 6 months using MBD, a
More informationHardware and Software Co-Design for Motor Control Applications
Hardware and Software Co-Design for Motor Control Applications GianCarlo Pacitti Senior Application Engineer, MathWorks 2015 The MathWorks, Inc. 1 Agenda Why use Hardware and Software for motor control?
More informationEin Modell - viele Zielsysteme
Ein Modell - viele Zielsysteme Automatische Codegenerierung aus MATLAB und Simulink Dr.-Ing. Daniel Weida 2015 The MathWorks, Inc. 1 Industry trends Code generation is expanding rapidly C C++ VHDL Verilog
More informationUsing Model-Based Design to Accelerate FPGA Development for Automotive Applications
2009-01-0519 Using Model-Based Design to Accelerate FPGA Development for Automotive Applications Copyright 2009 SAE International Sudhir Sharma The MathWorks Wang Chen The MathWorks ABSTRACT A recent Gartner
More informationKPIT Cummins. Automotive Body Electronics and Chassis Presentation
KPIT Cummins Automotive Body Electronics and Chassis Presentation Body and Chassis Practice Overview Over 10 years in Body and Chassis 125+ projects 150+ engineers Body and Chassis 25+ OEMs and Tier 1
More informationDESCRIPTION AND OPERATION > MODULE CONFIGURATION > SYSTEM OPERATION > PROGRAMMABLE MODULE INSTALLATION (PMI)
Page 1 of 5 2014 Ford Flex 3.5L Eng VIN 8 Limited Service Manual: MODULE CONFIGURATION SYSTEM Print Date: OPERATION > PROGRAMMABLE MODULE INSTALLATION (PMI) Programmable Installation (PMI) is a scan tool
More informationVerification and Validation of Models for Embedded Software Development Prashant Hegde MathWorks India Pvt. Ltd.
Verification and Validation of Models for Embedded Software Development Prashant Hegde MathWorks India Pvt. Ltd. 2015 The MathWorks, Inc. 1 Designing complex systems Is there something I don t know about
More informationImplementing MATLAB Algorithms in FPGAs and ASICs By Alexander Schreiber Senior Application Engineer MathWorks
Implementing MATLAB Algorithms in FPGAs and ASICs By Alexander Schreiber Senior Application Engineer MathWorks 2014 The MathWorks, Inc. 1 Traditional Implementation Workflow: Challenges Algorithm Development
More informationDesign and Verify Embedded Signal Processing Systems Using MATLAB and Simulink
Design and Verify Embedded Signal Processing Systems Using MATLAB and Simulink Giorgia Zucchelli, Application Engineer, MathWorks 10 January 2013, Technical University Eindhoven 2013 The MathWorks, Inc.
More informationTurning an Automated System into an Autonomous system using Model-Based Design Autonomous Tech Conference 2018
Turning an Automated System into an Autonomous system using Model-Based Design Autonomous Tech Conference 2018 Asaf Moses Systematics Ltd., Technical Product Manager aviasafm@systematics.co.il 1 Autonomous
More informationDesign and Verify Embedded Signal Processing Systems Using MATLAB and Simulink
Design and Verify Embedded Signal Processing Systems Using MATLAB and Simulink Giorgia Zucchelli, Application Engineer, MathWorks 17 January 2011, Technical University Eindhoven 1 Agenda Introduction to
More informationTesten zur Absicherung automatisierter Transformationsschritte im Model-Based Design
Testen zur Absicherung automatisierter Transformationsschritte im Model-Based Design October 4 th 2011 Dr. Marc Segelken Senior Application Engineer 2011 The MathWorks, Inc. 1 Agenda Testing Existing coverage
More informationOptimize DSP Designs and Code using Fixed-Point Designer
Optimize DSP Designs and Code using Fixed-Point Designer MathWorks Korea 이웅재부장 Senior Application Engineer 2013 The MathWorks, Inc. 1 Agenda Fixed-point concepts Introducing Fixed-Point Designer Overview
More informationModel-Based Design for Safety Critical Automotive Applications
Model-Based Design for Safety Critical Automotive Applications Mirko Conrad Senior Team Lead Simulink Certification and Standards 2008 The MathWorks, Inc. Model-Based Design for Safety-Critical Applications
More informationDevelopment and Deployment of ECU based Control Systems through MBD. Imperative role of Model based design in System Engineering
Development and Deployment of ECU based Control Systems through MBD Imperative role of Model based design in System Engineering Outline Scope of Work Problem Definition Solution System Engineering Model
More informationModel-Based Design for High Integrity Software Development Mike Anthony Senior Application Engineer The MathWorks, Inc.
Model-Based Design for High Integrity Software Development Mike Anthony Senior Application Engineer The MathWorks, Inc. Tucson, AZ USA 2009 The MathWorks, Inc. Model-Based Design for High Integrity Software
More informationIncreasing Design Confidence Model and Code Verification
Increasing Design Confidence Model and Code Verification 2017 The MathWorks, Inc. 1 The Cost of Failure Ariane 5 $7,500,000,000 Rocket & payload lost 2 The Cost of Failure USS Yorktown 0 Knots Top speed
More informationUsing Model-Based Design in conformance with safety standards
Using Model-Based Design in conformance with safety standards MATLAB EXPO 2014 Kristian Lindqvist Senior Engineer 2014 The MathWorks, Inc. 1 High-Integrity Applications Software-based systems that are
More informationTeam-Based Collaboration in Simulink Chris Fillyaw Application Engineer Detroit, MI
Team-Based Collaboration in Simulink Chris Fillyaw Application Engineer Detroit, MI 2012 The MathWorks, Inc. Development of a complex system Agenda Team-based workflow considerations Reproducing the design
More informationModel-Based Design for Video/Image Processing Applications
Model-Based Design for Video/Image Processing Applications The MathWorks Agenda Model-Based Design From MATLAB and Simulink to Altera FPGA Step-by-step design and implementation of edge detection algorithm
More informationWhat s New with the MATLAB and Simulink Product Families. Marta Wilczkowiak & Coorous Mohtadi Application Engineering Group
What s New with the MATLAB and Simulink Product Families Marta Wilczkowiak & Coorous Mohtadi Application Engineering Group 1 Area MATLAB Math, Statistics, and Optimization Application Deployment Parallel
More informationIncreasing Embedded Software Confidence Model and Code Verification. Daniel Martins Application Engineer MathWorks
Increasing Embedded Software Confidence Model and Code Verification Daniel Martins Application Engineer MathWorks Daniel.martins@mathworks.fr 1 What is the Cost of Software Failure Ariane 5 $7,500,000,000
More informationIntroducing Simulink R2012b for Signal Processing & Communications Graham Reith Senior Team Leader, UK Application Engineering
Introducing Simulink R2012b for Signal Processing & Communications Graham Reith Senior Team Leader, UK Application Engineering 2012 The MathWorks, Inc. 1 Simulink R2012b the most significant upgrade to
More informationVom Konzept zum Modell physikalischer Systeme Smarter Modellieren mit Simscape
Vom Konzept zum Modell physikalischer Systeme Smarter Modellieren mit Simscape A B T P T + - 12V Up V- V+ Down Up Down M Maximilian Apfelbeck MathWorks München, 9.07.2014 2014 The MathWorks, Inc. 1 Key
More informationMaster Class: Target Optimized Code Generation Shobhit Shanker Senior Application Engineer-Code Generation & Verification
Master Class: Target Optimized Code Generation Shobhit Shanker Senior Application Engineer-Code Generation & Verification 2011 The MathWorks, Inc. 1 Today s Agenda Why is Target Optimization Necessary?
More informationHardware Implementation and Verification by Model-Based Design Workflow - Communication Models to FPGA-based Radio
Hardware Implementation and Verification by -Based Design Workflow - Communication s to FPGA-based Radio Katsuhisa Shibata Industry Marketing MathWorks Japan 2015 The MathWorks, Inc. 1 Agenda Challenges
More informationExtending Model-Based Design for HW/SW Design and Verification in MPSoCs Jim Tung MathWorks Fellow
Extending Model-Based Design for HW/SW Design and Verification in MPSoCs Jim Tung MathWorks Fellow jim@mathworks.com 2014 The MathWorks, Inc. 1 Model-Based Design: From Concept to Production RESEARCH DESIGN
More informationSimulink for AUTOSAR: Best Practices
Simulink for AUTOSAR: Best Practices 李智慧高级技术咨询顾问 2015 The MathWorks, Inc. 1 What is AUTOSAR? AUTomotive Open System ARchitecture Objective: Establish an open standard for automotive E/E architecture Partnership
More informationIntroduction to C and HDL Code Generation from MATLAB
Introduction to C and HDL Code Generation from MATLAB 이웅재차장 Senior Application Engineer 2012 The MathWorks, Inc. 1 Algorithm Development Process Requirements Research & Design Explore and discover Design
More informationMixed-Signal Analog. C.S. Lee. Senior Vice President High-Volume Analog & Logic
Mixed-Signal Analog C.S. Lee Senior Vice President High-Volume Analog & Logic Mixed-Signal Analog Market Total Analog TAM 2004 $31.4 Billion Standard $11.9B Vertical Applications $19.5B Market Characteristics
More informationMotor Control with Embedded Coder and TI C2000
Motor Control with Embedded Coder and TI C2000 Executable Specifications Design with Simulation Models Continuous Test and Verification Production Code Generation 2016 The MathWorks, Inc. 1 Agenda TI C2000
More informationTargeting Motor Control Algorithms to System-on-Chip Devices
Targeting Motor Control Algorithms to System-on-Chip Devices Dr.-Ing. Werner Bachhuber 2015 The MathWorks, Inc. 1 Why use Model-Based Design to develop motor control applications on SoCs? Enables early
More informationMaking the Most of your MATLAB Models to Improve Verification
Making the Most of your MATLAB Models to Improve Verification Verification Futures 2016 Graham Reith Industry Manager: Communications, Electronics & Semiconductors Graham.Reith@mathworks.co.uk 2015 The
More informationSimulink to Embedded Hardware Paul Peeling MathWorks
Simulink to Embedded Hardware Paul Peeling MathWorks 2014 The MathWorks, Inc. 1 Model-Based Design for Hardware Stakeholder Needs Requirements Manage Requirements Traceability Complete Integration and
More informationAccelerating FPGA/ASIC Design and Verification
Accelerating FPGA/ASIC Design and Verification Tabrez Khan Senior Application Engineer Vidya Viswanathan Application Engineer 2015 The MathWorks, Inc. 1 Agenda Challeges with Traditional Implementation
More informationGenerating Industry Standards Production C Code Using Embedded Coder
Generating Industry Standards Production C Code Using Embedded Coder Rajat Arora Durvesh Kulkarni 2015 The MathWorks, Inc. 1 Lines of Code (LOC) is exploding 2011 1M 2018 100M We ve got 100 million lines
More informationSimulink 를이용한 효율적인레거시코드 검증방안
Simulink 를이용한 효율적인레거시코드 검증방안 류성연 2015 The MathWorks, Inc. 1 Agenda Overview to V&V in Model-Based Design Legacy code integration using Simulink Workflow for legacy code verification 2 Model-Based Design
More informationCybersecurity Challenges for Connected and Automated Vehicles. Robert W. Heller, Ph.D. Program Director R&D, Southwest Research Institute
Cybersecurity Challenges for Connected and Automated Vehicles Robert W. Heller, Ph.D. Program Director R&D, Southwest Research Institute Cars are becoming complex (and CAV is only part of it) 1965: No
More informationHardware and Software Co-Design for Motor Control Applications
Hardware and Software Co-Design for Motor Control Applications Jonas Rutström Application Engineering 2015 The MathWorks, Inc. 1 Masterclass vs. Presentation? 2 What s a SoC? 3 What s a SoC? When we refer
More informationGuidelines for deployment of MathWorks R2010a toolset within a DO-178B-compliant process
Guidelines for deployment of MathWorks R2010a toolset within a DO-178B-compliant process UK MathWorks Aerospace & Defence Industry Working Group Guidelines for deployment of MathWorks R2010a toolset within
More informationSimulation, prototyping and verification of standards-based wireless communications
Simulation, prototyping and verification of standards-based wireless communications Colin McGuire, Neil MacEwen 2015 The MathWorks, Inc. 1 Real Time LTE Cell Scanner with MATLAB and Simulink 2 Real time
More informationAutomotive System and Software Engineering with Model Based Design
Automotive System and Software Engineering with Model Based Design Agenda 1 Ansys Model Based System and Software Engineering Solution 2 Model Based Systems Engineering 3 Model-Based Software Engineering
More informationAgenda. > AUTOSAR Overview. AUTOSAR Solution. AUTOSAR on the way
AUTOSAR Overview Agenda > AUTOSAR Overview AUTOSAR Solution AUTOSAR on the way Slide: 2 Overview and Objectives AUTOSAR Partnership Slide: 3 Development of Functionality Electronic fuel injection Cruise
More informationDéploiement embarqué et connectivité hardware avec MATLAB et Simulink
Déploiement embarqué et connectivité hardware avec MATLAB et Simulink Paul Cox, MathWorks 2015 The MathWorks, Inc. 1 Agenda Introduction Hardware Support Packages for MATLAB and Simulink Processor-in-the-Loop
More informationDesigning and Prototyping Digital Systems on SoC FPGA The MathWorks, Inc. 1
Designing and Prototyping Digital Systems on SoC FPGA Hitu Sharma Application Engineer Vinod Thomas Sr. Training Engineer 2015 The MathWorks, Inc. 1 What is an SoC FPGA? A typical SoC consists of- A microcontroller,
More informationSafety and Reliability of Software-Controlled Systems Part 14: Fault mitigation
Safety and Reliability of Software-Controlled Systems Part 14: Fault mitigation Prof. Dr.-Ing. Stefan Kowalewski Chair Informatik 11, Embedded Software Laboratory RWTH Aachen University Summer Semester
More informationFormal Verification and Automatic Testing for Model-based Development in compliance with ISO 26262
Formal Verification and Automatic Testing for Model-based Development in compliance with ISO 26262 Is your software safe? Do you have evidence? 2 BTC Embedded Systems AG proprietary all rights reserved
More information[Sub Track 1-3] FPGA/ASIC 을타겟으로한알고리즘의효율적인생성방법및신기능소개
[Sub Track 1-3] FPGA/ASIC 을타겟으로한알고리즘의효율적인생성방법및신기능소개 정승혁과장 Senior Application Engineer MathWorks Korea 2015 The MathWorks, Inc. 1 Outline When FPGA, ASIC, or System-on-Chip (SoC) hardware is needed Hardware
More informationAdvanced Driver Assistance: Modular Image Sensor Concept
Vision Advanced Driver Assistance: Modular Image Sensor Concept Supplying value. Integrated Passive and Active Safety Systems Active Safety Passive Safety Scope Reduction of accident probability Get ready
More informationReal-Time Testing in a Modern, Agile Development Workflow
Real-Time Testing in a Modern, Agile Development Workflow Simon Eriksson Application Engineer 2015 The MathWorks, Inc. 1 Demo Going from Desktop Testing to Real-Time Testing 2 Key Take-Aways From This
More informationConnecting MATLAB & Simulink with your SystemVerilog Workflow for Functional Verification
Connecting MATLAB & Simulink with your SystemVerilog Workflow for Functional Verification Corey Mathis Industry Marketing Manager Communications, Electronics, and Semiconductors MathWorks 2014 MathWorks,
More informationINSTRUMENT CLUSTER 2.0
INSTRUMENT CLUSTER 2.0 Summary THE CONTEXT Electronic Content Timeline The Challenge MAGNETI MARELLI TARGET Digital Cluster Advantages The Requirements THE SOLUTION Project Definition System PROJECT DEVELOPEMENT
More informationAccelerate FPGA Prototyping with
Accelerate FPGA Prototyping with MATLAB and Simulink September 21 st 2010 Stephan van Beek Senior Application Engineer 1 From Idea to Implementation DESIGN Algorithm Development MATLAB Simulink Stateflow
More informationProduction Code Generation and Verification for Industry Standards Sang-Ho Yoon Senior Application Engineer
Production Code Generation and Verification for Industry Standards Sang-Ho Yoon Senior Application Engineer 2012 The MathWorks, Inc. 1 High-Integrity Applications Often Require Certification Software-based
More informationAutomatic Code Generation Technology Adoption Lessons Learned from Commercial Vehicle Case Studies
08AE-22 Automatic Code Generation Technology Adoption Lessons Learned from Commercial Vehicle Case Studies Copyright 2007 The MathWorks, Inc Tom Erkkinen The MathWorks, Inc. Scott Breiner John Deere ABSTRACT
More informationEuropean Conference on Nanoelectronics and Embedded Systems for Electric Mobility. HIL platform for EV charging and microgrid emulation
European Conference on Nanoelectronics and Embedded Systems for Electric Mobility emobility emotion 25-26 th September 2013, Toulouse, France HIL platform for EV charging and microgrid emulation Salvador
More informationArchitecture concepts in Body Control Modules
Bitte decken Sie die schraffierte Fläche mit einem Bild ab. Please cover the shaded area with a picture. (24,4 x 11,0 cm) Course 7 www.continental-corporation.com Interior Body and Security Table Of Contents
More informationUtilisation des Méthodes Formelles Sur le code et sur les modèles
Utilisation des Méthodes Formelles Sur le code et sur les modèles Patrick Munier Co-fondateur de PolySpace Technologies Polyspace Development Manager, MathWorks Patrick.Munier@mathworks.fr Forum Méthodes
More informationThe Safe State: Design Patterns and Degradation Mechanisms for Fail- Operational Systems
The Safe State: Design Patterns and Degradation Mechanisms for Fail- Operational Systems Alexander Much 2015-11-11 Agenda About EB Automotive Motivation Comparison of different architectures Concept for
More informationModeling a 4G LTE System in MATLAB
Modeling a 4G LTE System in MATLAB Part 3: Path to implementation (C and HDL) Houman Zarrinkoub PhD. Signal Processing Product Manager MathWorks houmanz@mathworks.com 2011 The MathWorks, Inc. 1 LTE Downlink
More informationEmbedded Real-Time Systems. Facts and figures. Characteristics
Embedded Real-Time Systems Properties of embedded real-time systems Types of functionality Many different types coexist Run-time support Real-time Operating systems (RTOS) Modelling embedded real-time
More information정형기법을활용한 AUTOSAR SWC 의구현확인및정적분석
정형기법을활용한 AUTOSAR SWC 의구현확인및정적분석 Develop high quality embedded software 이영준 Principal Application Engineer 2015 The MathWorks, Inc. 1 Agendas Unit-proving of AUTOSAR Component and Runtime error Secure Coding
More informationCertified Automotive Software Tester Sample Exam Paper Syllabus Version 2.0
Surname, Name: Gender: male female Company address: Telephone: Fax: E-mail-address: Invoice address: Training provider: Trainer: Certified Automotive Software Tester Sample Exam Paper Syllabus Version
More informationEmbedded Flash Driving Down the Memory Lane
Embedded Flash Driving Down the Memory Lane Vipin Tiwari Director, Marketing and Business Development Silicon Storage Technology, Inc. 1 Outline SST Overview Automotive Semiconductor Market Automotive
More informationAdvanced AC Motor Control S/W Development Sang-Ho Yoon Senior Application Engineer The MathWorks
Advanced AC Motor Control S/W Development Sang-Ho Yoon Senior Application Engineer The MathWorks 2012 The MathWorks, Inc. 1 Agenda Develop ECUs with Model-Based Design Generate Application Code for Prototyping
More informationTo develop a research engine control unit (ECU) that
APPLICATIONS OF CONTROL «Motorcycle Control Prototyping Using an FPGA-Based Embedded Control System CARROLL DASE, JEANNIE SULLIVAN FALCON, and BRIAN MACCLEERY To develop a research engine control unit
More informationModelling and Simulation Made Easy with Simulink Tiffany Liang Application Engineer MathWorks
Modelling and Simulation Made Easy with Simulink Tiffany Liang Application Engineer MathWorks 2015 The MathWorks, Inc. 1 What will you learn in this presentation? For those who are not familiar with Simulink
More informationStandardkonforme Absicherung mit Model-Based Design
Standardkonforme Absicherung mit Model-Based Design MATLAB EXPO 2014 Dr. Marc Segelken Principal Application Engineer 2014 The MathWorks, Inc. 1 Safety Standards for Embedded Systems IEC 61508 ISO 26262
More information